ELTEX-IPSLA-MIB

Imported modules

SNMPv2-SMI	SNMPv2-TC	IF-MIB
ELTEX-SMI-ACTUAL

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	IpAddress
Counter32	TEXTUAL-CONVENTION	TruthValue
RowStatus	DisplayString	TimeStamp
InterfaceIndexOrZero	eltexLtd

Defined Types

EltexIpSlaOperationType
Specifies the type of IP SLA operation.
TEXTUAL-CONVENTION
	INTEGER	icmp-echo(1), udp-jitter(2)

EltexIpSlaOperationStatus
Specifies the status of IP SLA operation.
TEXTUAL-CONVENTION
	INTEGER	active(1), inactive(2)

EltexIpSlaAdminCtrlEntry
SEQUENCE
	eltexIpSlaAdminCtrlIndex	INTEGER
	eltexIpSlaAdminCtrlType	EltexIpSlaOperationType
	eltexIpSlaAdminCtrlStatus	EltexIpSlaOperationStatus
	eltexIpSlaAdminCtrlFrequency	INTEGER
	eltexIpSlaAdminCtrlTag	DisplayString
	eltexIpSlaAdminCtrlOwner	DisplayString
	eltexIpSlaAdminCtrlRowStatus	RowStatus

EltexIpSlaAdminIcmpEchoEntry
SEQUENCE
	eltexIpSlaAdminIcmpEchoIndex	INTEGER
	eltexIpSlaAdminIcmpEchoTargetAddress	IpAddress
	eltexIpSlaAdminIcmpEchoSourceAddress	IpAddress
	eltexIpSlaAdminIcmpEchoSourceInterface	InterfaceIndexOrZero
	eltexIpSlaAdminIcmpEchoTimeOut	INTEGER
	eltexIpSlaAdminIcmpEchoReqDataSize	INTEGER
	eltexIpSlaAdminIcmpEchoTOS	INTEGER
	eltexIpSlaAdminIcmpEchoRowStatus	RowStatus

EltexIpSlaStatsOperStatus
Specifies the status of IP SLA operation.
TEXTUAL-CONVENTION
	INTEGER	unknown(0), ok(1), failed(2)

EltexIpSlaAdminUdpJitterEntry
SEQUENCE
	eltexIpSlaAdminUdpJitterIndex	INTEGER
	eltexIpSlaAdminUdpJitterTargetAddress	IpAddress
	eltexIpSlaAdminUdpJitterTargetPort	INTEGER
	eltexIpSlaAdminUdpJitterSourceAddress	IpAddress
	eltexIpSlaAdminUdpJitterSourcePort	INTEGER
	eltexIpSlaAdminUdpJitterSourceInterface	InterfaceIndexOrZero
	eltexIpSlaAdminUdpJitterInterval	INTEGER
	eltexIpSlaAdminUdpJitterNumPackets	INTEGER
	eltexIpSlaAdminUdpJitterTimeOut	INTEGER
	eltexIpSlaAdminUdpJitterReqDataSize	INTEGER
	eltexIpSlaAdminUdpJitterTOS	INTEGER
	eltexIpSlaAdminUdpJitterRowStatus	RowStatus

EltexIpSlaStatsIcmpEchoEntry
SEQUENCE
	eltexIpSlaStatsIcmpEchoIndex	INTEGER
	eltexIpSlaStatsIcmpEchoLastStatus	EltexIpSlaStatsOperStatus
	eltexIpSlaStatsIcmpEchoLastLatency	INTEGER
	eltexIpSlaStatsIcmpEchoMinLatency	INTEGER
	eltexIpSlaStatsIcmpEchoAvgLatency	INTEGER
	eltexIpSlaStatsIcmpEchoMaxLatency	INTEGER
	eltexIpSlaStatsIcmpEchoOperationsCtr	Counter32
	eltexIpSlaStatsIcmpEchoSuccessesCtr	Counter32
	eltexIpSlaStatsIcmpEchoFailuresCtr	Counter32
	eltexIpSlaStatsIcmpEchoTimeoutCtr	Counter32
	eltexIpSlaStatsIcmpEchoUnreachNetCtr	Counter32
	eltexIpSlaStatsIcmpEchoUnreachHostCtr	Counter32
	eltexIpSlaStatsIcmpEchoUnreachProtCtr	Counter32
	eltexIpSlaStatsIcmpEchoExTimeTransCtr	Counter32
	eltexIpSlaStatsIcmpEchoExTimeReassCtr	Counter32
	eltexIpSlaStatsIcmpEchoUnableSendCtr	Counter32
	eltexIpSlaStatsIcmpEchoBadReplyCtr	Counter32

EltexIpSlaStatsUdpJitterEntry
SEQUENCE
	eltexIpSlaStatsUdpJitterIndex	INTEGER
	eltexIpSlaStatsUdpJitterLastStatus	EltexIpSlaStatsOperStatus
	eltexIpSlaStatsUdpJitterLastLatency	INTEGER
	eltexIpSlaStatsUdpJitterNumLatency	INTEGER
	eltexIpSlaStatsUdpJitterSumLatency	INTEGER
	eltexIpSlaStatsUdpJitterMinLatency	INTEGER
	eltexIpSlaStatsUdpJitterAvgLatency	INTEGER
	eltexIpSlaStatsUdpJitterMaxLatency	INTEGER
	eltexIpSlaStatsUdpJitterNumSDLatency	INTEGER
	eltexIpSlaStatsUdpJitterSumSDLatency	INTEGER
	eltexIpSlaStatsUdpJitterMinSDLatency	INTEGER
	eltexIpSlaStatsUdpJitterAvgSDLatency	INTEGER
	eltexIpSlaStatsUdpJitterMaxSDLatency	INTEGER
	eltexIpSlaStatsUdpJitterNumDSLatency	INTEGER
	eltexIpSlaStatsUdpJitterSumDSLatency	INTEGER
	eltexIpSlaStatsUdpJitterMinDSLatency	INTEGER
	eltexIpSlaStatsUdpJitterAvgDSLatency	INTEGER
	eltexIpSlaStatsUdpJitterMaxDSLatency	INTEGER
	eltexIpSlaStatsUdpJitterNumSDPosJitter	INTEGER
	eltexIpSlaStatsUdpJitterSumSDPosJitter	INTEGER
	eltexIpSlaStatsUdpJitterMinSDPosJitter	INTEGER
	eltexIpSlaStatsUdpJitterAvgSDPosJitter	INTEGER
	eltexIpSlaStatsUdpJitterMaxSDPosJitter	INTEGER
	eltexIpSlaStatsUdpJitterNumDSPosJitter	INTEGER
	eltexIpSlaStatsUdpJitterSumDSPosJitter	INTEGER
	eltexIpSlaStatsUdpJitterMinDSPosJitter	INTEGER
	eltexIpSlaStatsUdpJitterAvgDSPosJitter	INTEGER
	eltexIpSlaStatsUdpJitterMaxDSPosJitter	INTEGER
	eltexIpSlaStatsUdpJitterNumSDNegJitter	INTEGER
	eltexIpSlaStatsUdpJitterSumSDNegJitter	INTEGER
	eltexIpSlaStatsUdpJitterMinSDNegJitter	INTEGER
	eltexIpSlaStatsUdpJitterAvgSDNegJitter	INTEGER
	eltexIpSlaStatsUdpJitterMaxSDNegJitter	INTEGER
	eltexIpSlaStatsUdpJitterNumDSNegJitter	INTEGER
	eltexIpSlaStatsUdpJitterSumDSNegJitter	INTEGER
	eltexIpSlaStatsUdpJitterMinDSNegJitter	INTEGER
	eltexIpSlaStatsUdpJitterAvgDSNegJitter	INTEGER
	eltexIpSlaStatsUdpJitterMaxDSNegJitter	INTEGER
	eltexIpSlaStatsUdpJitterOperationsCtr	Counter32
	eltexIpSlaStatsUdpJitterSuccessesCtr	Counter32
	eltexIpSlaStatsUdpJitterFailuresCtr	Counter32
	eltexIpSlaStatsUdpJitterTimeoutCtr	Counter32
	eltexIpSlaStatsUdpJitterUnreachNetCtr	Counter32
	eltexIpSlaStatsUdpJitterUnreachHostCtr	Counter32
	eltexIpSlaStatsUdpJitterUnreachPortCtr	Counter32
	eltexIpSlaStatsUdpJitterUnreachProtCtr	Counter32
	eltexIpSlaStatsUdpJitterExTimeTransCtr	Counter32
	eltexIpSlaStatsUdpJitterExTimeReassCtr	Counter32
	eltexIpSlaStatsUdpJitterUnableSendCtr	Counter32
	eltexIpSlaStatsUdpJitterBadReplyCtr	Counter32
	eltexIpSlaStatsUdpJitterPacketsOOSCtr	Counter32

Defined Values

eltexIpSlaMIB		1.3.6.1.4.1.35265.32
This module defines a MIB for IP Service Level Agreements Application. IP SLA operations allows to analyze IP service levels by using active traffic monitoring. Each of IP SLA operation is described by protocol it uses and type of performance metric. IP SLA Objects \|--- Application Group \| \|--- Responder Administration \| \|--- UDP Jitter Responder Defenitions \| \|--- Administration Group \| \|--- Overall Control Administration \| \|--- ICMP Echo Administration Definitions \| \|--- UDP Jitter Administration Definitions \| \|--- Statistics Collection Group \| \|--- Overall Control Statistics \| \|--- ICMP Echo Statistics Definitions \| \|--- UDP Jitter Statistics Definitions \| \|--- Schedule Configuration \| \|--- History Collection Group IP SLA Notifications \|
MODULE-IDENTITY

eltexIpSlaObjects		1.3.6.1.4.1.35265.32.1
OBJECT IDENTIFIER

eltexIpSlaAppl		1.3.6.1.4.1.35265.32.1.1
OBJECT IDENTIFIER

eltexIpSlaAdmin		1.3.6.1.4.1.35265.32.1.2
OBJECT IDENTIFIER

eltexIpSlaStats		1.3.6.1.4.1.35265.32.1.3
OBJECT IDENTIFIER

eltexIpSlaSchedule		1.3.6.1.4.1.35265.32.1.4
OBJECT IDENTIFIER

eltexIpSlaApplResponder		1.3.6.1.4.1.35265.32.1.1.13
OBJECT IDENTIFIER

eltexIpSlaApplResponderUdpJitterPort		1.3.6.1.4.1.35265.32.1.1.13.1
Defines UDP port number which is listened by IP SLA responder for UDP Jitter operations
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

eltexIpSlaAdminCtrlTable		1.3.6.1.4.1.35265.32.1.2.1
A table of IP SLA overall control administration definitions. The IP SLA control is located in multiple tables. This first table defines the most common SLA configuration. The following tables contain objects which configure scheduling, information gathering, and notification generation. All of these tables using this table's index as their own.
Status: current	Access: read-write
OBJECT-TYPE
	SEQUENCE OF
		EltexIpSlaAdminCtrlEntry

eltexIpSlaAdminCtrlEntry		1.3.6.1.4.1.35265.32.1.2.1.1
A row entry representing a single IP SLA operation.
Status: current	Access: read-write
OBJECT-TYPE
	EltexIpSlaAdminCtrlEntry

eltexIpSlaAdminCtrlIndex		1.3.6.1.4.1.35265.32.1.2.1.1.1
This field specifies index for all IP SLA tables. Rows with identic index in each of following tables describes the same IP SLA operation as this table does.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

eltexIpSlaAdminCtrlType		1.3.6.1.4.1.35265.32.1.2.1.1.2
This field specifies type of IP SLA operation.
Status: current	Access: read-write
OBJECT-TYPE
	EltexIpSlaOperationType

eltexIpSlaAdminCtrlStatus		1.3.6.1.4.1.35265.32.1.2.1.1.3
This field specifies status of IP SLA operation.
Status: current	Access: read-only
OBJECT-TYPE
	EltexIpSlaOperationStatus

eltexIpSlaAdminCtrlFrequency		1.3.6.1.4.1.35265.32.1.2.1.1.4
Specifies the duration between initiating each IP SLA operation. This object cannot be set to a value which would be a shorter duration than operation timeout.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..604800

eltexIpSlaAdminCtrlTag		1.3.6.1.4.1.35265.32.1.2.1.1.5
The field provides description tag for IP SLA operation.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..128)

eltexIpSlaAdminCtrlOwner		1.3.6.1.4.1.35265.32.1.2.1.1.6
The field describes owner of the IP SLA operation.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

eltexIpSlaAdminCtrlRowStatus		1.3.6.1.4.1.35265.32.1.2.1.1.7
The status of the MIB entry.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

eltexIpSlaAdminIcmpEchoTable		1.3.6.1.4.1.35265.32.1.2.2
A table of ICMP Echo operation definitions.
Status: current	Access: read-write
OBJECT-TYPE
	SEQUENCE OF
		EltexIpSlaAdminIcmpEchoEntry

eltexIpSlaAdminIcmpEchoEntry		1.3.6.1.4.1.35265.32.1.2.2.1
A row entry representing a single ICMP Echo operation.
Status: current	Access: read-write
OBJECT-TYPE
	EltexIpSlaAdminIcmpEchoEntry

eltexIpSlaAdminIcmpEchoIndex		1.3.6.1.4.1.35265.32.1.2.2.1.1
This field specifies index for ICMP Echo operation. Index of each row must match the index in eltexIpSlaAdminCtrl table.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

eltexIpSlaAdminIcmpEchoTargetAddress		1.3.6.1.4.1.35265.32.1.2.2.1.2
A string which specifies IP address of the destination.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

eltexIpSlaAdminIcmpEchoSourceAddress		1.3.6.1.4.1.35265.32.1.2.2.1.3
A string which specifies the source IP address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

eltexIpSlaAdminIcmpEchoSourceInterface		1.3.6.1.4.1.35265.32.1.2.2.1.4
A string which specifies the source interface.
Status: current	Access: read-write
OBJECT-TYPE
	InterfaceIndexOrZero

eltexIpSlaAdminIcmpEchoTimeOut		1.3.6.1.4.1.35265.32.1.2.2.1.5
Specifies the duration to wait for a IP SLA operation completion. For connection oriented protocols, this may cause the connection to be closed by the operation. Once closed, it will be assumed that the connection reestablishment will be performed. To prevent unwanted closure of connections, be sure to set this value to a realistic connection timeout.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..3600000

eltexIpSlaAdminIcmpEchoReqDataSize		1.3.6.1.4.1.35265.32.1.2.2.1.6
This object represents the number of octets to be placed into packages send during IP SLA operation
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..1432

eltexIpSlaAdminIcmpEchoTOS		1.3.6.1.4.1.35265.32.1.2.2.1.7
This object represents the type of service octet in an IP header.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

eltexIpSlaAdminIcmpEchoRowStatus		1.3.6.1.4.1.35265.32.1.2.2.1.8
The status of the MIB entry.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

eltexIpSlaAdminUdpJitterTable		1.3.6.1.4.1.35265.32.1.2.3
A table of UDP Jitter operation definitions.
Status: current	Access: read-write
OBJECT-TYPE
	SEQUENCE OF
		EltexIpSlaAdminUdpJitterEntry

eltexIpSlaAdminUdpJitterEntry		1.3.6.1.4.1.35265.32.1.2.3.1
A row entry representing a single UDP Jitter operation.
Status: current	Access: read-write
OBJECT-TYPE
	EltexIpSlaAdminUdpJitterEntry

eltexIpSlaAdminUdpJitterIndex		1.3.6.1.4.1.35265.32.1.2.3.1.1
This field specifies index for UdpJitter operation. Index of each row must match the index in eltexIpSlaAdminCtrl table.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

eltexIpSlaAdminUdpJitterTargetAddress		1.3.6.1.4.1.35265.32.1.2.3.1.2
A string which specifies IP address of the destination.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

eltexIpSlaAdminUdpJitterTargetPort		1.3.6.1.4.1.35265.32.1.2.3.1.3
A number of destination UDP port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

eltexIpSlaAdminUdpJitterSourceAddress		1.3.6.1.4.1.35265.32.1.2.3.1.4
A string which specifies the source IP address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

eltexIpSlaAdminUdpJitterSourcePort		1.3.6.1.4.1.35265.32.1.2.3.1.5
A number of source UDP port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

eltexIpSlaAdminUdpJitterSourceInterface		1.3.6.1.4.1.35265.32.1.2.3.1.6
A string which specifies the source interface.
Status: current	Access: read-write
OBJECT-TYPE
	InterfaceIndexOrZero

eltexIpSlaAdminUdpJitterInterval		1.3.6.1.4.1.35265.32.1.2.3.1.7
This value represents the inter-packet delay between packets and is in milliseconds. This value is currently used for Jitter probe. This object is applicable to jitter probe only.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..60000

eltexIpSlaAdminUdpJitterNumPackets		1.3.6.1.4.1.35265.32.1.2.3.1.8
This value represents the number of packets that need to be transmitted. This value is currently used for Jitter probe. This object is applicable to jitter probe only.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..1000

eltexIpSlaAdminUdpJitterTimeOut		1.3.6.1.4.1.35265.32.1.2.3.1.9
Specifies the duration to wait for a IP SLA operation completion. For connection oriented protocols, this may cause the connection to be closed by the operation. Once closed, it will be assumed that the connection reestablishment will be performed. To prevent unwanted closure of connections, be sure to set this value to a realistic connection timeout.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..3600000

eltexIpSlaAdminUdpJitterReqDataSize		1.3.6.1.4.1.35265.32.1.2.3.1.10
This object represents the number of octets to be placed into packages send during IP SLA operation
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..1432

eltexIpSlaAdminUdpJitterTOS		1.3.6.1.4.1.35265.32.1.2.3.1.11
This object represents the type of service octet in an IP header.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

eltexIpSlaAdminUdpJitterRowStatus		1.3.6.1.4.1.35265.32.1.2.3.1.12
The status of the MIB entry.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

eltexIpSlaStatsIcmpEchoTable		1.3.6.1.4.1.35265.32.1.3.2
The database of ICMP Echo operation statistics.
Status: current	Access: read-write
OBJECT-TYPE
	SEQUENCE OF
		EltexIpSlaStatsIcmpEchoEntry

eltexIpSlaStatsIcmpEchoEntry		1.3.6.1.4.1.35265.32.1.3.2.1
A row entry representing an IP SLA operation.
Status: current	Access: read-write
OBJECT-TYPE
	EltexIpSlaStatsIcmpEchoEntry

eltexIpSlaStatsIcmpEchoIndex		1.3.6.1.4.1.35265.32.1.3.2.1.1
The index of ICMP Echo statistics row. It matches the indexes of operations in the Overall Control Group tables.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsIcmpEchoLastStatus		1.3.6.1.4.1.35265.32.1.3.2.1.2
The string contains a status of the last completed operation.
Status: current	Access: read-only
OBJECT-TYPE
	EltexIpSlaStatsOperStatus

eltexIpSlaStatsIcmpEchoLastLatency		1.3.6.1.4.1.35265.32.1.3.2.1.3
A latency measured during the last completed operation.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsIcmpEchoMinLatency		1.3.6.1.4.1.35265.32.1.3.2.1.4
The lowest latency measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsIcmpEchoAvgLatency		1.3.6.1.4.1.35265.32.1.3.2.1.5
The average of latencies measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsIcmpEchoMaxLatency		1.3.6.1.4.1.35265.32.1.3.2.1.6
The highest of latencies measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsIcmpEchoOperationsCtr		1.3.6.1.4.1.35265.32.1.3.2.1.7
Indicates the number of all operations which were tried to perform.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsIcmpEchoSuccessesCtr		1.3.6.1.4.1.35265.32.1.3.2.1.8
Indicates the number of successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsIcmpEchoFailuresCtr		1.3.6.1.4.1.35265.32.1.3.2.1.9
Indicates the number of unsuccessfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsIcmpEchoTimeoutCtr		1.3.6.1.4.1.35265.32.1.3.2.1.10
Indicates the number of operations which were failed by timeout.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsIcmpEchoUnreachNetCtr		1.3.6.1.4.1.35265.32.1.3.2.1.11
Indicates the number of operations which were failed due to unreachable net.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsIcmpEchoUnreachHostCtr		1.3.6.1.4.1.35265.32.1.3.2.1.12
Indicates the number of operations which were failed due to unreachable host.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsIcmpEchoUnreachProtCtr		1.3.6.1.4.1.35265.32.1.3.2.1.13
Indicates the number of operations which were failed due to unreachable protocol.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsIcmpEchoExTimeTransCtr		1.3.6.1.4.1.35265.32.1.3.2.1.14
Indicates the number of operations which were failed due to exceeded TTL in transit.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsIcmpEchoExTimeReassCtr		1.3.6.1.4.1.35265.32.1.3.2.1.15
Indicates the number of operations which were failed due to exceeded time of fragment reassembly.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsIcmpEchoUnableSendCtr		1.3.6.1.4.1.35265.32.1.3.2.1.16
Indicates the number of operations which were failed while sending a request packet.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsIcmpEchoBadReplyCtr		1.3.6.1.4.1.35265.32.1.3.2.1.17
Indicates the number of operations which were failed due to bad reply data.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsUdpJitterTable		1.3.6.1.4.1.35265.32.1.3.3
The database of UDP Jitter operation statistics.
Status: current	Access: read-write
OBJECT-TYPE
	SEQUENCE OF
		EltexIpSlaStatsUdpJitterEntry

eltexIpSlaStatsUdpJitterEntry		1.3.6.1.4.1.35265.32.1.3.3.1
A row entry representing an IP SLA operation.
Status: current	Access: read-write
OBJECT-TYPE
	EltexIpSlaStatsUdpJitterEntry

eltexIpSlaStatsUdpJitterIndex		1.3.6.1.4.1.35265.32.1.3.3.1.1
The index of UDP Jitter statistics row. It matches the indexes of operations in the Overall Control Group tables.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterLastStatus		1.3.6.1.4.1.35265.32.1.3.3.1.2
The string contains a status of the last completed operation.
Status: current	Access: read-only
OBJECT-TYPE
	EltexIpSlaStatsOperStatus

eltexIpSlaStatsUdpJitterLastLatency		1.3.6.1.4.1.35265.32.1.3.3.1.3
A two-way latency measured during the last completed operation.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterNumLatency		1.3.6.1.4.1.35265.32.1.3.3.1.4
The number of two-way latencies measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterSumLatency		1.3.6.1.4.1.35265.32.1.3.3.1.5
The sum of two-way latencies measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterMinLatency		1.3.6.1.4.1.35265.32.1.3.3.1.6
The lowest two-way latency measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterAvgLatency		1.3.6.1.4.1.35265.32.1.3.3.1.7
The average of two-way latencies measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterMaxLatency		1.3.6.1.4.1.35265.32.1.3.3.1.8
The highest of two-way latencies measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterNumSDLatency		1.3.6.1.4.1.35265.32.1.3.3.1.9
The number of one-way source-to-destination latencies measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterSumSDLatency		1.3.6.1.4.1.35265.32.1.3.3.1.10
The sum of one-way source-to-destination latencies measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterMinSDLatency		1.3.6.1.4.1.35265.32.1.3.3.1.11
The lowest one-way source-to-destination latency measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterAvgSDLatency		1.3.6.1.4.1.35265.32.1.3.3.1.12
The average one-way source-to-destination latency measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterMaxSDLatency		1.3.6.1.4.1.35265.32.1.3.3.1.13
The maximum one-way source-to-destination latency measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterNumDSLatency		1.3.6.1.4.1.35265.32.1.3.3.1.14
The number of one-way destination-to-source latencies measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterSumDSLatency		1.3.6.1.4.1.35265.32.1.3.3.1.15
The sum of one-way destination-to-source latencies measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterMinDSLatency		1.3.6.1.4.1.35265.32.1.3.3.1.16
The lowest one-way destination-to-source latency measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterAvgDSLatency		1.3.6.1.4.1.35265.32.1.3.3.1.17
The average one-way destination-to-source latency measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterMaxDSLatency		1.3.6.1.4.1.35265.32.1.3.3.1.18
The maximum one-way destination-to-source latency measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterNumSDPosJitter		1.3.6.1.4.1.35265.32.1.3.3.1.19
The number of one-way source-to-destination positive jitters measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterSumSDPosJitter		1.3.6.1.4.1.35265.32.1.3.3.1.20
The sum of one-way source-to-destination positive jitters measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterMinSDPosJitter		1.3.6.1.4.1.35265.32.1.3.3.1.21
The lowest one-way source-to-destination positive jitter measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterAvgSDPosJitter		1.3.6.1.4.1.35265.32.1.3.3.1.22
The average one-way source-to-destination positive jitter measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterMaxSDPosJitter		1.3.6.1.4.1.35265.32.1.3.3.1.23
The maximum one-way source-to-destination positive jitter measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterNumDSPosJitter		1.3.6.1.4.1.35265.32.1.3.3.1.24
The number of one-way destination-to-source positive jitters measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterSumDSPosJitter		1.3.6.1.4.1.35265.32.1.3.3.1.25
The sum of one-way destination-to-source positive jitters measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterMinDSPosJitter		1.3.6.1.4.1.35265.32.1.3.3.1.26
The lowest one-way destination-to-source positive jitter measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterAvgDSPosJitter		1.3.6.1.4.1.35265.32.1.3.3.1.27
The average one-way destination-to-source positive jitter measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterMaxDSPosJitter		1.3.6.1.4.1.35265.32.1.3.3.1.28
The maximum one-way destination-to-source positive jitter measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterNumSDNegJitter		1.3.6.1.4.1.35265.32.1.3.3.1.29
The number of one-way source-to-destination negative jitters measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterSumSDNegJitter		1.3.6.1.4.1.35265.32.1.3.3.1.30
The sum of one-way source-to-destination negative jitters measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterMinSDNegJitter		1.3.6.1.4.1.35265.32.1.3.3.1.31
The lowest one-way source-to-destination negative jitter measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterAvgSDNegJitter		1.3.6.1.4.1.35265.32.1.3.3.1.32
The average one-way source-to-destination negative jitter measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterMaxSDNegJitter		1.3.6.1.4.1.35265.32.1.3.3.1.33
The maximum one-way source-to-destination negative jitter measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterNumDSNegJitter		1.3.6.1.4.1.35265.32.1.3.3.1.34
The number of one-way destination-to-source negative jitters measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterSumDSNegJitter		1.3.6.1.4.1.35265.32.1.3.3.1.35
The sum oflowest one-way destination-to-source negative jitters measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterMinDSNegJitter		1.3.6.1.4.1.35265.32.1.3.3.1.36
The lowest one-way destination-to-source negative jitter measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterAvgDSNegJitter		1.3.6.1.4.1.35265.32.1.3.3.1.37
The average one-way destination-to-source negative jitter measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterMaxDSNegJitter		1.3.6.1.4.1.35265.32.1.3.3.1.38
The maximum one-way destination-to-source negative jitter measured during all successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

eltexIpSlaStatsUdpJitterOperationsCtr		1.3.6.1.4.1.35265.32.1.3.3.1.39
Indicates the number of all operations which were tried to perform.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsUdpJitterSuccessesCtr		1.3.6.1.4.1.35265.32.1.3.3.1.40
Indicates the number of successfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsUdpJitterFailuresCtr		1.3.6.1.4.1.35265.32.1.3.3.1.41
Indicates the number of unsuccessfully completed operations.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsUdpJitterTimeoutCtr		1.3.6.1.4.1.35265.32.1.3.3.1.42
Indicates the number of operations which were failed by timeout.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsUdpJitterUnreachNetCtr		1.3.6.1.4.1.35265.32.1.3.3.1.43
Indicates the number of operations which were failed due to unreachable net.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsUdpJitterUnreachHostCtr		1.3.6.1.4.1.35265.32.1.3.3.1.44
Indicates the number of operations which were failed due to unreachable host.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsUdpJitterUnreachPortCtr		1.3.6.1.4.1.35265.32.1.3.3.1.45
Indicates the number of operations which were failed due to unreachable UDP port.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsUdpJitterUnreachProtCtr		1.3.6.1.4.1.35265.32.1.3.3.1.46
Indicates the number of operations which were failed due to unreachable protocol.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsUdpJitterExTimeTransCtr		1.3.6.1.4.1.35265.32.1.3.3.1.47
Indicates the number of operations which were failed due to exceeded TTL in transit.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsUdpJitterExTimeReassCtr		1.3.6.1.4.1.35265.32.1.3.3.1.48
Indicates the number of operations which were failed due to exceeded time of fragment reassembly.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsUdpJitterUnableSendCtr		1.3.6.1.4.1.35265.32.1.3.3.1.49
Indicates the number of operations which were failed while sending a request packet.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsUdpJitterBadReplyCtr		1.3.6.1.4.1.35265.32.1.3.3.1.50
Indicates the number of operations which were failed due to bad reply data.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaStatsUdpJitterPacketsOOSCtr		1.3.6.1.4.1.35265.32.1.3.3.1.51
Indicates the number of packets recievied out of sequence.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

eltexIpSlaScheduleStartTrigger		1.3.6.1.4.1.35265.32.1.4.1
Writing operation's index in this scalar triggers starting of the operation.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

eltexIpSlaScheduleStopTrigger		1.3.6.1.4.1.35265.32.1.4.2
Writing operation's index in this scalar triggers stopping of the operation.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER