ELTEX-FLEX-LINKS-MIB

File: ELTEX-FLEX-LINKS-MIB.mib (14360 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
IF-MIB ELTEX-SMI-ACTUAL

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Unsigned32 MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP TruthValue InterfaceIndex
InterfaceIndexOrZero eltexLtd

Defined Types

EltexFlIfConfigEntry  
SEQUENCE    
  eltexFlIfConfigPrimary InterfaceIndex
  eltexFlIfConfigBackUp InterfaceIndexOrZero

EltexFlIfConfigExtEntry  
SEQUENCE    
  eltexFlIfConfigPreemptionMode INTEGER
  eltexFlIfConfigPreemptionDelay Unsigned32

EltexFlIfStatusEntry  
SEQUENCE    
  eltexFlIfIndex InterfaceIndex
  eltexFlIfStatus INTEGER

Defined Values

eltexFlexLinksMIB 1.3.6.1.4.1.35265.31
This MIB module is for configuration and status query of Flex Links feature on the Eltex device. Flex Links are a pair of Layer 2 interfaces, where one interface is configured to act as a backup to the other. The feature provides an alternative solution to the Spanning Tree Protocol (STP), allowing users to turn off STP and still provide basic link redundancy. Flex Links are typically configured in service provider or enterprise networks where users do not want to run STP on the device.
MODULE-IDENTITY    

eltexFlexLinksMIBNotifs 1.3.6.1.4.1.35265.31.0
OBJECT IDENTIFIER    

eltexFlexLinksMIBObjects 1.3.6.1.4.1.35265.31.1
OBJECT IDENTIFIER    

eltexFlexLinksMIBConformance 1.3.6.1.4.1.35265.31.2
OBJECT IDENTIFIER    

eltexFlConfig 1.3.6.1.4.1.35265.31.1.1
OBJECT IDENTIFIER    

eltexFlStatus 1.3.6.1.4.1.35265.31.1.2
OBJECT IDENTIFIER    

eltexFlIfConfigTable 1.3.6.1.4.1.35265.31.1.1.1
This table allows user to configure Flex Links. The Flex Links feature requires interface pairs to be setup. This table allows user to specify such interface pairs. An interface can become part of only one such interface pair at any given time.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EltexFlIfConfigEntry

eltexFlIfConfigEntry 1.3.6.1.4.1.35265.31.1.1.1.1
An entry containing information about Flex Links configuration. Each entry configures a pair of interfaces for a Flex Links. Only those Layer 2 interfaces which are capable of performing Flex Links operation may be configured in this table. Once an interface is configured as part of a Flex Links pair, such an interface, can not be configured as a part of other Flex Links pairs.
Status: current Access: not-accessible
OBJECT-TYPE    
  EltexFlIfConfigEntry  

eltexFlIfConfigPrimary 1.3.6.1.4.1.35265.31.1.1.1.1.1
The object indicates the primary interface in this Flex Links pair.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndex  

eltexFlIfConfigBackUp 1.3.6.1.4.1.35265.31.1.1.1.1.2
The object indicates the back up interface in this Flex Links pair. The value of this object is changed to 0 (zero) if this interface is removed from the ifTable. The SNMP agent is responsible for updating this object's value once the interface is added to the ifTable. The value of 0 (zero) cannot be set.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndexOrZero  

eltexFlEnableStatusChangeNotif 1.3.6.1.4.1.35265.31.1.1.2
This variable indicates whether the system produces the eltexFlIfStatusChangeNotif. A value of 'false' will prevent eltexFlIfStatusChangeNotif.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eltexFlIfConfigExtTable 1.3.6.1.4.1.35265.31.1.1.3
This table contains management information, such as of MAC address-table Move Update(MMU), preemption mechanism, VLAN load balancing of Flex Links pair, of interfaces which are capable of supporting these features.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EltexFlIfConfigExtEntry

eltexFlIfConfigExtEntry 1.3.6.1.4.1.35265.31.1.1.3.1
An entry containing Flex Links management information for a particular interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  EltexFlIfConfigExtEntry  

eltexFlIfConfigPreemptionMode 1.3.6.1.4.1.35265.31.1.1.3.1.1
The object specifies the preemption mechanism for a Flex Link interface pair. off - No preemption happens from active interface to backup interface. forced - The active interface always preempts the backup interface. The preemption occurs after the time specified in eltexFlIfConfigPreemptionDelay. bandwidth - The interface with higher bandwidth always acts as the active interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(1), forced(2), bandwidth(3)  

eltexFlIfConfigPreemptionDelay 1.3.6.1.4.1.35265.31.1.1.3.1.2
The object specifies the delay time until an interface preempts another interface for a Flex Link interface pair.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

eltexFlIfStatusTable 1.3.6.1.4.1.35265.31.1.2.1
A list of interfaces which are members of Flex Links.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EltexFlIfStatusEntry

eltexFlIfStatusEntry 1.3.6.1.4.1.35265.31.1.2.1.1
An entry, containing status information about a Flex Links interface. Entry is created when an interface is configured as a member of a Flex Links. When an entry is created in the eltexFlIfConfigTable, entries corresponding to eltexFlIfConfigPrimary and eltexFlIfConfigBackUp are created in this table. Entry is deleted when an interface is removed from a Flex Links. When an entry is removed from the eltexFlIfConfigTable, entries corresponding to eltexFlIfConfigPrimary and eltexFlIfConfigBackUp are deleted from this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EltexFlIfStatusEntry  

eltexFlIfIndex 1.3.6.1.4.1.35265.31.1.2.1.1.1
The index value which uniquely identifies the interface to which this entry is applicable. eltexFlIfIndex is the same as the ifIndex of the interface associated with a Flex Links.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

eltexFlIfStatus 1.3.6.1.4.1.35265.31.1.2.1.1.2
The status of an interface which is participating in Flex Links operation. A value of 'forwarding' indicates that, the interface is participating in Flex Links operation and is actively forwarding traffic. A value of 'blocking' indicates that, interface is participating in Flex Links operation and is ready to forward traffic if the interface it backs up in Flex Links operation goes down. A value of 'down' indicates that, the interface participating in Flex Links operation has gone down. A value of 'unknown' indicates that, the interface is participating Flex Links operation and has entered an unknown state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER forwarding(1), blocking(2), down(3), unknown(4)  

eltexFlIfStatusChangeNotif 1.3.6.1.4.1.35265.31.0.1
A eltexFlIfStatusChangeNotif is generated when the value of eltexFlIfStatus changes.
Status: current Access: read-only
NOTIFICATION-TYPE    

eltexFlexLinksMIBCompliances 1.3.6.1.4.1.35265.31.2.1
OBJECT IDENTIFIER    

eltexFlexLinksMIBGroups 1.3.6.1.4.1.35265.31.2.2
OBJECT IDENTIFIER    

eltexFlexLinksMIBCompliance 1.3.6.1.4.1.35265.31.2.1.1
The compliance statement for entities which implement the ELTEX-FLEX-LINKS-MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

eltexFlexLinksIfConfigGroup 1.3.6.1.4.1.35265.31.2.2.1
A collection of objects providing interface configuration information for Flex Links.
Status: current Access: read-only
OBJECT-GROUP    

eltexFlexLinksIfStatusGroup 1.3.6.1.4.1.35265.31.2.2.2
A collection of objects providing interface status information for Flex Links.
Status: current Access: read-only
OBJECT-GROUP    

eltexFlexLinksEnableNotifGroup 1.3.6.1.4.1.35265.31.2.2.3
A collection of objects providing enabling/disabling of the status change notifications for Flex Links.
Status: current Access: read-only
OBJECT-GROUP    

eltexFlexLinksNotifGroup 1.3.6.1.4.1.35265.31.2.2.4
A collection of notifications providing the status change for Flex Links.
Status: current Access: read-only
NOTIFICATION-GROUP    

eltexFlexLinksPreemptionGroup 1.3.6.1.4.1.35265.31.2.2.5
A collection of objects providing interface preemption information of Flex Links.
Status: current Access: read-only
OBJECT-GROUP