ELTEX-BRIDGE-ERPS-MIB

File: ELTEX-BRIDGE-ERPS-MIB.mib (20435 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC Q-BRIDGE-MIB
ELTEX-BRIDGE-EXT-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE RowStatus
MacAddress TruthValue NOTIFICATION-TYPE
VlanIdOrNone eltexBridgeExtMIBObjects

Defined Types

EltexErpsEnabledState  
Indicates whether the state of object is enabled or disabled.
TEXTUAL-CONVENTION    
  INTEGER enabled(1), disabled(2)  

EltexErpsMgmtRAPSPortState  
Indicates Ethernet ring port state.
TEXTUAL-CONVENTION    
  INTEGER fowarding(1), blocking(2), signal-fail(3), manual-switch(4), forced-switch(5)  

EltexErpsMgmtRAPSPortId  
Ethernet ring port id.
TEXTUAL-CONVENTION    
  INTEGER none(1), west(2), east(3)  

EltexErpsMgmtRAPSVlanEntry  
SEQUENCE    
  eltexErpsMgmtRAPSVlanId INTEGER
  eltexErpsMgmtRAPSWestPort INTEGER
  eltexErpsMgmtRAPSWestPortState EltexErpsMgmtRAPSPortState
  eltexErpsMgmtRAPSEastPort INTEGER
  eltexErpsMgmtRAPSEastPortState EltexErpsMgmtRAPSPortState
  eltexErpsMgmtRAPSRPLPort EltexErpsMgmtRAPSPortId
  eltexErpsMgmtRAPSRPLOwnerAdminState EltexErpsEnabledState
  eltexErpsMgmtRAPSRingMEL INTEGER
  eltexErpsMgmtRAPSHoldOffTime INTEGER
  eltexErpsMgmtRAPSGuardTime INTEGER
  eltexErpsMgmtRAPSWTRTime INTEGER
  eltexErpsMgmtRAPSRingState INTEGER
  eltexErpsMgmtRAPSRingAdminState EltexErpsEnabledState
  eltexErpsMgmtRAPSRPLOwnerOperStatus INTEGER
  eltexErpsMgmtRAPSProtectionVlanRangeList1to1024 OCTET STRING
  eltexErpsMgmtRAPSProtectionVlanRangeList1025to2048 OCTET STRING
  eltexErpsMgmtRAPSProtectionVlanRangeList2049to3072 OCTET STRING
  eltexErpsMgmtRAPSProtectionVlanRangeList3073to4094 OCTET STRING
  eltexErpsMgmtRAPSRevertive TruthValue
  eltexErpsMgmtRAPSProtocolVersion INTEGER
  eltexErpsMgmtRAPSPortForcedSwitch EltexErpsMgmtRAPSPortId
  eltexErpsMgmtRAPSPortManualSwitch EltexErpsMgmtRAPSPortId
  eltexErpsMgmtRAPSRowStatus RowStatus

EltexErpsMgmtSubRingCtrlEntry  
SEQUENCE    
  eltexErpsMgmtSubRingCtrlRAPSVlanId INTEGER
  eltexErpsMgmtSubRingCtrlSubRingRAPSVlanId INTEGER
  eltexErpsMgmtSubRingCtrlTCPropagationState EltexErpsEnabledState
  eltexErpsMgmtSubRingCtrlRowStatus RowStatus

Defined Values

eltexErpsMIB 1.3.6.1.4.1.35265.35.1.1
The MIB module for managing Ethernet Ring Protection Switching.
MODULE-IDENTITY    

eltexErpsCtrl 1.3.6.1.4.1.35265.35.1.1.1
OBJECT IDENTIFIER    

eltexErpsInfo 1.3.6.1.4.1.35265.35.1.1.2
OBJECT IDENTIFIER    

eltexErpsMgmt 1.3.6.1.4.1.35265.35.1.1.3
OBJECT IDENTIFIER    

eltexErpsNotify 1.3.6.1.4.1.35265.35.1.1.4
OBJECT IDENTIFIER    

eltexErpsAdminState 1.3.6.1.4.1.35265.35.1.1.1.1
This object indicates the ERPS state of the bridge.
Status: current Access: read-write
OBJECT-TYPE    
  EltexErpsEnabledState  

eltexErpsLogState 1.3.6.1.4.1.35265.35.1.1.1.2
This object indicates the ERPS log state of the bridge.
Status: current Access: read-write
OBJECT-TYPE    
  EltexErpsEnabledState  

eltexErpsTrapState 1.3.6.1.4.1.35265.35.1.1.1.3
This object indicates the ERPS trap state of the bridge.
Status: current Access: read-write
OBJECT-TYPE    
  EltexErpsEnabledState  

eltexErpsPendingAction 1.3.6.1.4.1.35265.35.1.1.1.5
The action to be done with the pending configuration. copyPendingActive - to copy the pending erps configuration to the active one. copyActivePending - to copy the active erps configuration to the pending one.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER copyPendingActive(1), copyActivePending(2)  

eltexErpsPendingActionVlan 1.3.6.1.4.1.35265.35.1.1.1.6
Variable is associated with eltexErpsPendingAction and determines vlan_tag number in config for action copying/revert on pending config
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

eltexErpsGetConfigId 1.3.6.1.4.1.35265.35.1.1.1.7
Set config id fot snmp get.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), pending(2)  

eltexErpsMgmtRAPSVlanTable 1.3.6.1.4.1.35265.35.1.1.3.1
This table contains ERPS ring configuration information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EltexErpsMgmtRAPSVlanEntry

eltexErpsMgmtRAPSVlanEntry 1.3.6.1.4.1.35265.35.1.1.3.1.1
A list of ERPS ring configuration information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EltexErpsMgmtRAPSVlanEntry  

eltexErpsMgmtRAPSVlanId 1.3.6.1.4.1.35265.35.1.1.3.1.1.1
The RAPS VLAN is an index of configuration.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

eltexErpsMgmtRAPSWestPort 1.3.6.1.4.1.35265.35.1.1.3.1.1.2
This is one of the Ethernet ring ports. The value 0 indicates the west port is a virtual channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1..65535  

eltexErpsMgmtRAPSWestPortState 1.3.6.1.4.1.35265.35.1.1.3.1.1.3
This is the west port state. It may change sometimes. When the west port is configured on a virtual channel, the west port state is always fowarding.
Status: current Access: read-only
OBJECT-TYPE    
  EltexErpsMgmtRAPSPortState  

eltexErpsMgmtRAPSEastPort 1.3.6.1.4.1.35265.35.1.1.3.1.1.4
This is the other Ethernet ring port. The value 0 indicates the west port is a virtual channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1..65535  

eltexErpsMgmtRAPSEastPortState 1.3.6.1.4.1.35265.35.1.1.3.1.1.5
This is the east port state. It may change sometimes. When the east port is configured on a virtual channel, the east port state is always fowarding.
Status: current Access: read-only
OBJECT-TYPE    
  EltexErpsMgmtRAPSPortState  

eltexErpsMgmtRAPSRPLPort 1.3.6.1.4.1.35265.35.1.1.3.1.1.6
When the port Enable state is enabled, the RPL port's current port role is defined by the application of the ERPS.
Status: current Access: read-write
OBJECT-TYPE    
  EltexErpsMgmtRAPSPortId  

eltexErpsMgmtRAPSRPLOwnerAdminState 1.3.6.1.4.1.35265.35.1.1.3.1.1.7
The administrative value of the RPL owner state. The RPL owner is an Ethernet Ring Node adjacent to the RPL that is responsible for blocking its end of the RPL under normal conditions.
Status: current Access: read-write
OBJECT-TYPE    
  EltexErpsEnabledState  

eltexErpsMgmtRAPSRingMEL 1.3.6.1.4.1.35265.35.1.1.3.1.1.8
The ring MEL is the maintenance entity group (MEG) level providing a communication channel for ring automatic protection switching (RAPS) information.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

eltexErpsMgmtRAPSHoldOffTime 1.3.6.1.4.1.35265.35.1.1.3.1.1.9
In order to coordinate timing of protection switches at multiple layers.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..10000  

eltexErpsMgmtRAPSGuardTime 1.3.6.1.4.1.35265.35.1.1.3.1.1.10
This is used to prevent ring nodes from receiving outdated RAPS messages.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 10..2000  

eltexErpsMgmtRAPSWTRTime 1.3.6.1.4.1.35265.35.1.1.3.1.1.11
In the revertive mode of operation, to prevent frequent operation of the protection switch due to an intermittent defect, a failed working transport entity must become stable in a fault-free state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..12  

eltexErpsMgmtRAPSRingState 1.3.6.1.4.1.35265.35.1.1.3.1.1.12
This indicates the state of the ring: begin, init, idle, or protection.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER init(1), idle(2), protection(3), manual-switch(4), forced-switch(5), pending(6)  

eltexErpsMgmtRAPSRingAdminState 1.3.6.1.4.1.35265.35.1.1.3.1.1.13
This indicates the administrative state of the ring.
Status: current Access: read-write
OBJECT-TYPE    
  EltexErpsEnabledState  

eltexErpsMgmtRAPSRPLOwnerOperStatus 1.3.6.1.4.1.35265.35.1.1.3.1.1.14
The current operational value of the RPL owner state. The value 'active' is used to indicate that the RPL owner administrative state is enabled and the device is operated as the active RPL owner. The value 'inactive' is used to indicate that the RPL owner administrative state is enabled, but the device is operated as the inactive RPL owner. The value 'disabled' is used to indicate that the RPL owner administrative state of the device is disabled.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2), disabled(3)  

eltexErpsMgmtRAPSProtectionVlanRangeList1to1024 1.3.6.1.4.1.35265.35.1.1.3.1.1.15
This object indicates the VLAN range (1-1024) that belongs to the protection VLANs.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

eltexErpsMgmtRAPSProtectionVlanRangeList1025to2048 1.3.6.1.4.1.35265.35.1.1.3.1.1.16
This object indicates the VLAN range (1025-2048) that belongs to the protection VLANs.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

eltexErpsMgmtRAPSProtectionVlanRangeList2049to3072 1.3.6.1.4.1.35265.35.1.1.3.1.1.17
This object indicates the VLAN range (2049-3072) that belongs to the protection VLANs.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

eltexErpsMgmtRAPSProtectionVlanRangeList3073to4094 1.3.6.1.4.1.35265.35.1.1.3.1.1.18
This object indicates the VLAN range (3073-4094) that belongs to the protection VLANs.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

eltexErpsMgmtRAPSRevertive 1.3.6.1.4.1.35265.35.1.1.3.1.1.19
This indicates the revertive mode.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

eltexErpsMgmtRAPSProtocolVersion 1.3.6.1.4.1.35265.35.1.1.3.1.1.20
This object indicates the ERPS protocol compatibility with other versions of ITU-T G.8032.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1 | 2  

eltexErpsMgmtRAPSPortForcedSwitch 1.3.6.1.4.1.35265.35.1.1.3.1.1.21
Forced switch port.
Status: current Access: read-write
OBJECT-TYPE    
  EltexErpsMgmtRAPSPortId  

eltexErpsMgmtRAPSPortManualSwitch 1.3.6.1.4.1.35265.35.1.1.3.1.1.22
Manual switch port.
Status: current Access: read-write
OBJECT-TYPE    
  EltexErpsMgmtRAPSPortId  

eltexErpsMgmtRAPSRowStatus 1.3.6.1.4.1.35265.35.1.1.3.1.1.23
This object indicates the RowStatus of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eltexErpsMgmtSubRingCtrlTable 1.3.6.1.4.1.35265.35.1.1.3.2
This table contains ERPS sub-ring configuration information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EltexErpsMgmtSubRingCtrlEntry

eltexErpsMgmtSubRingCtrlEntry 1.3.6.1.4.1.35265.35.1.1.3.2.1
A list of ERPS sub-ring configuration information.
Status: current Access: not-accessible
OBJECT-TYPE    
  EltexErpsMgmtSubRingCtrlEntry  

eltexErpsMgmtSubRingCtrlRAPSVlanId 1.3.6.1.4.1.35265.35.1.1.3.2.1.1
The RAPS VLAN is an index of configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

eltexErpsMgmtSubRingCtrlSubRingRAPSVlanId 1.3.6.1.4.1.35265.35.1.1.3.2.1.2
This indicates the ring control VLAN-ID of the sub-ring which connects to another ring.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

eltexErpsMgmtSubRingCtrlTCPropagationState 1.3.6.1.4.1.35265.35.1.1.3.2.1.3
This indicates the state of sub-ring topology change propagation.
Status: current Access: read-write
OBJECT-TYPE    
  EltexErpsEnabledState  

eltexErpsMgmtSubRingCtrlRowStatus 1.3.6.1.4.1.35265.35.1.1.3.2.1.4
This object indicates the RowStatus of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

eltexErpsNotifyPrefix 1.3.6.1.4.1.35265.35.1.1.4.0
OBJECT IDENTIFIER    

eltexErpsSFDetectedTrap 1.3.6.1.4.1.35265.35.1.1.4.0.1
When the signal fail occurs, a trap will be generated.
Status: current Access: read-create
NOTIFICATION-TYPE    

eltexErpsSFClearedTrap 1.3.6.1.4.1.35265.35.1.1.4.0.2
When the signal fail clears, a trap will be generated.
Status: current Access: read-create
NOTIFICATION-TYPE    

eltexErpsRPLOwnerConflictTrap 1.3.6.1.4.1.35265.35.1.1.4.0.3
When a conflict occurs, a trap will be generated.
Status: current Access: read-create
NOTIFICATION-TYPE    

eltexErpsNotificationBindings 1.3.6.1.4.1.35265.35.1.1.4.2
OBJECT IDENTIFIER    

eltexErpsNodeId 1.3.6.1.4.1.35265.35.1.1.4.2.1
This used trap object means the node MAC.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MacAddress