DLINK-3100-rndMng

File: DLINK-3100-rndMng.mib (11503 bytes)

Imported modules

DLINK-3100-MIB	SNMPv2-SMI	SNMPv2-TC
INET-ADDRESS-MIB

Imported symbols

rnd	Unsigned32	MODULE-IDENTITY
OBJECT-TYPE	TimeTicks	RowStatus
TruthValue	DisplayString	TEXTUAL-CONVENTION
InetAddressType	InetAddress

Defined Types

RlGroupMngDeviceEntry
SEQUENCE
	rlGroupMngDeviceIdType	InetAddressType
	rlGroupMngDeviceId	InetAddress
	rlGroupMngSubdevice	INTEGER
	rlGroupMngDeviceDescription	DisplayString
	rlGroupMngGroupMngEnabled	TruthValue
	rlGroupMngGroupLLDPDeviceId	DisplayString
	rlGroupMngDeviceVendor	DisplayString
	rlGroupMngDeviceAdvertisedCachingTime	INTEGER
	rlGroupMngDeviceLocationURL	DisplayString
	rlGroupMngDeviceLastSeen	TimeTicks

Defined Values

rndMng		1.3.6.1.4.1.171.10.94.89.89.1
The private MIB module definition for RND general management MIB.
MODULE-IDENTITY

rndSysId		1.3.6.1.4.1.171.10.94.89.89.1.1
Identification of an RND device. The device type for each integer clarifies the sysObjectID in MIB - II.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rndAction		1.3.6.1.4.1.171.10.94.89.89.1.2
This variable enables the operator to perform one of the specified actions on the tables maintained by the network device. Send actions require support of proprietery File exchange protocol.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	reset(1), sendNetworkTab(2), deleteNetworkTab(3), sendRoutingTab(4), deleteRoutingTab(5), sendLanTab(6), deleteLanTab(7), deleteArpTab(8), sendArpTab(9), deleteRouteTab(10), sendRouteTab(11), backupSPFRoutingTab(12), backupIPRoutingTab(13), backupNetworkTab(14), backupLanTab(15), backupArpTab(16), backupIPXRipTab(17), backupIPXSAPTab(18), resetStartupCDB(19), eraseStartupCDB(20), deleteZeroHopRoutingAllocTab(21), slipDisconnect(22), deleteDynamicLanTab(23), eraseRunningCDB(24), copyStartupToRunning(25), none(26), resetToFactoryDefaults(27)

rndFileName		1.3.6.1.4.1.171.10.94.89.89.1.3
The name of the file used internally by RND for transferring tables maintained by network devices, using a prorietary File exchange protocol.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING

rlSnmpVersionSupported		1.3.6.1.4.1.171.10.94.89.89.1.4
Indicates the snmp versions that are supported by this device.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(1)

rlSnmpMibVersion		1.3.6.1.4.1.171.10.94.89.89.1.5
Indicates the snmp support version that is supported by this device.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rlCpuUtilEnable		1.3.6.1.4.1.171.10.94.89.89.1.6
Enables measurement of the device CPU utilization. In order to get real values for rlCpuUtilDuringLastSecond, rlCpuUtilDuringLastMinute and rlCpuUtilDuringLast5Minutes, the value of this object must be true.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rlCpuUtilDuringLastSecond		1.3.6.1.4.1.171.10.94.89.89.1.7
Percentage of the device CPU utilization during last second. The value 101 is a dummy value, indicating that the CPU utilization was not measured (since measurement is disabled or was disabled during last second).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..101

rlCpuUtilDuringLastMinute		1.3.6.1.4.1.171.10.94.89.89.1.8
Percentage of the device CPU utilization during last minute. The value 101 is a dummy value, indicating that the CPU utilization was not measured (since measurement is disabled or was disabled during last minute).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..101

rlCpuUtilDuringLast5Minutes		1.3.6.1.4.1.171.10.94.89.89.1.9
Percentage of the device CPU utilization during the last 5 minutes. The value 101 is a dummy value, indicating that the CPU utilization was not measured (since measurement is disabled or was disabled during last 5 minutes).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..101

rlRebootDelay		1.3.6.1.4.1.171.10.94.89.89.1.10
Setting the variable will cause the device to reboot rlRebootDelay timeticks from the moment this variable was set. If not set, the variable will return a value of 4294967295. If set to 4294967295, reboot action is cancelled. The maximum delay is set by the host parameter: reboot_delay_max
Status: current	Access: read-write
OBJECT-TYPE
	TimeTicks

rlGroupManagement		1.3.6.1.4.1.171.10.94.89.89.1.11
OBJECT IDENTIFIER

rlGroupMngQuery		1.3.6.1.4.1.171.10.94.89.89.1.11.1
Setting value query will cause the device to query for UPNP devices on the network. The device will always return value idle for GET.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	query(1), idle(2)

rlGroupMngQueryPeriod		1.3.6.1.4.1.171.10.94.89.89.1.11.2
Sets desired interval between queries for UPNP devices on the network. Setting 0 will result in no such query. Note that the actual query interval might be less than the set value if another application running in the device requested a shorter interval. Likewise setting 0 will not necessarily stop periodic queries if another application is still interested in periodic polling.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

rlGroupMngLastUpdate		1.3.6.1.4.1.171.10.94.89.89.1.11.3
The last time rlGroupMng MIB was updated.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

rlGroupMngDevicesTable		1.3.6.1.4.1.171.10.94.89.89.1.11.4
The table showing the discovered devices.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlGroupMngDeviceEntry

rlGroupMngDeviceEntry		1.3.6.1.4.1.171.10.94.89.89.1.11.4.1
The row definition for this table.
Status: current	Access: not-accessible
OBJECT-TYPE
	RlGroupMngDeviceEntry

rlGroupMngDeviceIdType		1.3.6.1.4.1.171.10.94.89.89.1.11.4.1.1
The IP address type of the discovered device
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddressType

rlGroupMngDeviceId		1.3.6.1.4.1.171.10.94.89.89.1.11.4.1.2
The IP address of the discovered device
Status: current	Access: not-accessible
OBJECT-TYPE
	InetAddress

rlGroupMngSubdevice		1.3.6.1.4.1.171.10.94.89.89.1.11.4.1.3
A subdevice within the rlGroupMngDeviceId. Only subdevices with greatest specifity will be kept (specific UUID device is more specific than basic device which is in turn more specific than root device.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER

rlGroupMngDeviceDescription		1.3.6.1.4.1.171.10.94.89.89.1.11.4.1.4
The discovery protocol description of the device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

rlGroupMngGroupMngEnabled		1.3.6.1.4.1.171.10.94.89.89.1.11.4.1.5
Indicates whether the device has Group Management enable.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

rlGroupMngGroupLLDPDeviceId		1.3.6.1.4.1.171.10.94.89.89.1.11.4.1.6
The LLDP device id. If it is empty the device id is not known (either it is a non-MTS device or a non-LLDP supporting MTS device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

rlGroupMngDeviceVendor		1.3.6.1.4.1.171.10.94.89.89.1.11.4.1.7
The vendor of the device. If empty the vendor is not known.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

rlGroupMngDeviceAdvertisedCachingTime		1.3.6.1.4.1.171.10.94.89.89.1.11.4.1.8
The caching time advertised by the device. If no update for this device has been received during this caching time the system will assume that the device has left the network and will therefore remove its entry from the table.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rlGroupMngDeviceLocationURL		1.3.6.1.4.1.171.10.94.89.89.1.11.4.1.9
The URL inidicating the location of the XML presenting the details of the device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

rlGroupMngDeviceLastSeen		1.3.6.1.4.1.171.10.94.89.89.1.11.4.1.10
The value of sysUpTime at the moment of last reception of an update for this device.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

rlRunningCDBequalToStartupCDB		1.3.6.1.4.1.171.10.94.89.89.1.13
Indicates whether there are changes in running CDB that were not saved in flash.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor