DLINK-3100-TIMESYNCHRONIZATION-MIB
File:
DLINK-3100-TIMESYNCHRONIZATION-MIB.mib (65517 bytes)
Imported modules
Imported symbols
Defined Types
NTPTimeStamp |
|
NTP timestamps are represented as a 64-bit
unsigned fixed-point number, in seconds relative to
00:00 on 1 January 1900. The integer part is in the
first 32 bits and the fraction part is in the last
32 bits. |
TEXTUAL-CONVENTION |
|
|
|
|
OCTET STRING |
Size(8) |
|
NTPSignedTimeValue |
|
The time in seconds that could represent signed
quantities like time delay with respect to some
source. This textual-convention is specific to DLINK-3100
implementation of NTP where 32-bit integers are used
for such quantities. The signed integer part is in
the first 16 bits and the fraction part is in the
last 16 bits. |
TEXTUAL-CONVENTION |
|
|
|
|
OCTET STRING |
Size(4) |
|
NTPStratum |
|
Indicates the stratum of the clock. The stratum
defines the accuracy of a time server. Higher the
stratum, lower the accuracy.
0, unspecified
1, primary reference (e.g., calibrated atomic clock,
radio clock)
2-255, secondary reference (via NTP) |
TEXTUAL-CONVENTION |
|
|
|
|
Integer32 |
0..255 |
|
RlTimeSyncMethod |
|
Method to be used for time synchronization in the device. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
none(1), sntp(2), ntp(3) |
|
RlDaylightSavingTimeMode |
|
Daylight Saving Time - Recurring/Date/None. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
recurring(1), date(2), none(3) |
|
RlTimeZoneEntry |
|
SEQUENCE |
|
|
|
|
rlTimeZoneIndex |
INTEGER |
|
|
rlTimeZoneTimeSyncMethod |
RlTimeSyncMethod |
|
|
rlTimeZoneTimeZoneOffset |
DisplayString |
Size(1..6) |
|
rlTimeZoneTimeZoneCode |
DisplayString |
Size(0..16) |
|
rlTimeZoneDaylightSavingTimeMode |
RlDaylightSavingTimeMode |
|
|
rlTimeZoneDaylightSavingTimeStart |
OCTET STRING |
Size(14) |
|
rlTimeZoneDaylightSavingTimeEnd |
OCTET STRING |
Size(14) |
|
rlTimeZoneDaylightSavingTimeOffset |
Integer32 |
|
|
rlTimeZoneDaylightSavingTimeCode |
DisplayString |
Size(0..16) |
|
rlTimeZoneTZDSTOffset |
INTEGER |
|
|
rlTimeZoneTimeZoneName |
DisplayString |
Size(0..16) |
|
rlTimeZoneDataType |
INTEGER |
|
|
rlTimeZoneDataSourceIfIndex |
INTEGER |
|
RlSntpNtpSyncType |
|
Method to be used for time synchronization in the device. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
none(1), unicast(2), anycast(3), broadcast(4) |
|
RlSntpNtpSyncEntryType |
|
Entry in rlSntpNtpConfigSrvTable. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
primaryPollSrv(1), syncSrv(2) |
|
RlSntpNtpConfigSrvEntry |
|
SEQUENCE |
|
|
|
|
rlSntpNtpConfigSrvEntryType |
RlSntpNtpSyncEntryType |
|
|
rlSntpNtpConfigSrvInetAddressType |
InetAddressType |
|
|
rlSntpNtpConfigSrvInetAddress |
InetAddress |
|
|
rlSntpNtpConfigSrvMrid |
INTEGER |
|
|
rlSntpNtpConfigSrvIfIndex |
INTEGER |
|
|
rlSntpNtpConfigSrvSyncType |
RlSntpNtpSyncType |
|
|
rlSntpNtpConfigSrvStratum |
NTPStratum |
|
RlSntpBroadcastEntry |
|
SEQUENCE |
|
|
|
|
rlSntpBroadcastIfIndex |
INTEGER |
|
|
rlSntpBroadcastIfAdminState |
INTEGER |
|
|
rlSntpBroadcastMode |
INTEGER |
|
|
rlSntpBroadcastPolled |
TruthValue |
|
|
rlSntpBroadcastAddress |
IpAddress |
|
|
rlSntpBroadcastStratum |
NTPStratum |
|
|
rlSntpBroadcastLastResp |
NTPTimeStamp |
|
|
rlSntpBroadcastStatus |
INTEGER |
|
|
rlSntpBroadcastOffset |
NTPTimeStamp |
|
|
rlSntpBroadcastDelay |
NTPSignedTimeValue |
|
|
rlSntpBroadcastRowStatus |
RowStatus |
|
RlSntpAnycastEntry |
|
SEQUENCE |
|
|
|
|
rlSntpAnycastIfIndex |
INTEGER |
|
|
rlSntpAnycastAddress |
IpAddress |
|
|
rlSntpAnycastStratum |
NTPStratum |
|
|
rlSntpAnycastLastResp |
NTPTimeStamp |
|
|
rlSntpAnycastStatus |
INTEGER |
|
|
rlSntpAnycastOffset |
NTPTimeStamp |
|
|
rlSntpAnycastDelay |
NTPSignedTimeValue |
|
|
rlSntpAnycastRowStatus |
RowStatus |
|
RlSntpServerEntry |
|
SEQUENCE |
|
|
|
|
rlSntpServerAddress |
IpAddress |
|
|
rlSntpServerPolled |
TruthValue |
|
|
rlSntpServerStratum |
NTPStratum |
|
|
rlSntpServerLastResp |
NTPTimeStamp |
|
|
rlSntpServerStatus |
INTEGER |
|
|
rlSntpServersOffset |
NTPTimeStamp |
|
|
rlSntpServersDelay |
NTPSignedTimeValue |
|
|
rlSntpServersKeyIdentifier |
Unsigned32 |
|
|
rlSntpServerRowStatus |
RowStatus |
|
RlSntpAuthenticationEntry |
|
SEQUENCE |
|
|
|
|
rlSntpAuthenticationKeyID |
Unsigned32 |
1..4294967295 |
|
rlSntpAuthenticationKeyValue |
DisplayString |
|
|
rlSntpAuthenticationKeyState |
INTEGER |
|
|
rlSntpAuthenticationRowStatus |
RowStatus |
|
RlSntpBroadcastInetEntry |
|
SEQUENCE |
|
|
|
|
rlSntpBroadcastInetIfIndex |
INTEGER |
|
|
rlSntpBroadcastInetIfAdminState |
INTEGER |
|
|
rlSntpBroadcastInetMode |
INTEGER |
|
|
rlSntpBroadcastInetPolled |
TruthValue |
|
|
rlSntpBroadcastInetAddressType |
InetAddressType |
|
|
rlSntpBroadcastInetAddress |
InetAddress |
|
|
rlSntpBroadcastInetStratum |
NTPStratum |
|
|
rlSntpBroadcastInetLastResp |
NTPTimeStamp |
|
|
rlSntpBroadcastInetStatus |
INTEGER |
|
|
rlSntpBroadcastInetOffset |
NTPTimeStamp |
|
|
rlSntpBroadcastInetDelay |
NTPSignedTimeValue |
|
|
rlSntpBroadcastInetRowStatus |
RowStatus |
|
RlSntpAnycastInetEntry |
|
SEQUENCE |
|
|
|
|
rlSntpAnycastInetIfIndex |
INTEGER |
|
|
rlSntpAnycastInetAddressType |
InetAddressType |
|
|
rlSntpAnycastInetAddress |
InetAddress |
|
|
rlSntpAnycastInetStratum |
NTPStratum |
|
|
rlSntpAnycastInetLastResp |
NTPTimeStamp |
|
|
rlSntpAnycastInetStatus |
INTEGER |
|
|
rlSntpAnycastInetOffset |
NTPTimeStamp |
|
|
rlSntpAnycastInetDelay |
NTPSignedTimeValue |
|
|
rlSntpAnycastInetRowStatus |
RowStatus |
|
RlSntpServerInetEntry |
|
SEQUENCE |
|
|
|
|
rlSntpServerInetAddressType |
InetAddressType |
|
|
rlSntpServerInetAddress |
InetAddress |
|
|
rlSntpServerInetPolled |
TruthValue |
|
|
rlSntpServerInetStratum |
NTPStratum |
|
|
rlSntpServerInetLastResp |
NTPTimeStamp |
|
|
rlSntpServerInetStatus |
INTEGER |
|
|
rlSntpServerInetOffset |
NTPTimeStamp |
|
|
rlSntpServerInetDelay |
NTPSignedTimeValue |
|
|
rlSntpServerInetKeyIdentifier |
Unsigned32 |
|
|
rlSntpServerInetRowStatus |
RowStatus |
|
Defined Values
rlTimeSynchronization |
1.3.6.1.4.1.171.10.94.89.89.92 |
The MIB module describes the private MIB for SNTP & TIME definitions. |
MODULE-IDENTITY |
|
|
|
rlSntpConfig |
1.3.6.1.4.1.171.10.94.89.89.92.2.2 |
OBJECT IDENTIFIER |
|
|
|
rlNtpConfig |
1.3.6.1.4.1.171.10.94.89.89.92.2.3 |
OBJECT IDENTIFIER |
|
|
|
rlTimeSyncMibVersion |
1.3.6.1.4.1.171.10.94.89.89.92.1.1 |
TimeSync Mib Version. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlTimeSyncMethod |
1.3.6.1.4.1.171.10.94.89.89.92.1.5 |
Method to be used for time synchronization in the device. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RlTimeSyncMethod |
|
|
rlTimeZone |
1.3.6.1.4.1.171.10.94.89.89.92.1.6 |
Offset from Greenwich time (format [+/-]hh:mm). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..6) |
|
rlTimeZoneCode |
1.3.6.1.4.1.171.10.94.89.89.92.1.7 |
Code definition for current TimeZone. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..16) |
|
rlDaylightSavingTimeStart |
1.3.6.1.4.1.171.10.94.89.89.92.1.9 |
Daylight Saving Time start date.
In recurring mode (format 1): week wday month hh:mm
In recurring mode (format 2): RJul n hh:mm
In date mode: month day year hh:mm
week: 0-6 (0=First, 6=Last)
wday: 1-7 (Sunday-Saturday)
month: 1-12 (January-December)
day: 1-31
year: 0-99 (2000-2099)
hh: 0-23 (hours)
mm: 0-59 (minutes)
n: 0-365 (zero-based Julian day of the year. Leap days shall be
counted, and it is possible to refer to February 29).
Format 2 for recurring mode is used only in the dynamic entry and
should not be used in the static entry (with index 1). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(14) |
|
rlDaylightSavingTimeEnd |
1.3.6.1.4.1.171.10.94.89.89.92.1.10 |
Daylight Saving Time start date.
In recurring mode (format 1): week wday month hh:mm
In recurring mode (format 2): RJul n hh:mm
In date mode: month day year hh:mm
week: 0-6 (0=First, 6=Last)
wday: 1-7 (Sunday-Saturday)
month: 1-12 (January-December)
day: 1-31
year: 0-99 (2000-2099)
hh: 0-23 (hours)
mm: 0-59 (minutes)
n: 0-365 (zero-based Julian day of the year. Leap days shall be
counted, and it is possible to refer to February 29).
Format 2 for recurring mode is used only in the dynamic entry and
should not be used in the static entry (with index 1). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(14) |
|
rlDaylightSavingTimeOffset |
1.3.6.1.4.1.171.10.94.89.89.92.1.11 |
Daylight Saving Time - The number of minutes to add to
the clock during summer time. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
rlTZDSTOffset |
1.3.6.1.4.1.171.10.94.89.89.92.1.13 |
Local Time Zone and Daylight Saving Time offset
in seconds. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlTimeZoneName |
1.3.6.1.4.1.171.10.94.89.89.92.1.14 |
Human readable string describing Local Time Zone and Daylight Saving Time. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..16) |
|
rlTimeZoneTable |
1.3.6.1.4.1.171.10.94.89.89.92.1.15 |
TimeZone information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
RlTimeZoneEntry |
|
rlTimeZoneEntry |
1.3.6.1.4.1.171.10.94.89.89.92.1.15.1 |
The row definition for this table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlTimeZoneEntry |
|
|
rlTimeZoneIndex |
1.3.6.1.4.1.171.10.94.89.89.92.1.15.1.1 |
Entry index. A row with index 2 will be existing in case the DHCP
timezone is supported, and will contain Timezone and Summertime dynamic
values.
Using index 2 in SET operations is allowed only for SNMP
inner clients (SNMPServ users), on condition that DHCP timezone option
is supported. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..2 |
|
rlTimeZoneDaylightSavingTimeStart |
1.3.6.1.4.1.171.10.94.89.89.92.1.15.1.6 |
Daylight Saving Time start date.
In recurring mode (format 1): week wday month hh:mm
In recurring mode (format 2): RJul n hh:mm
In date mode: month day year hh:mm
week: 0-6 (0=First, 6=Last)
wday: 1-7 (Sunday-Saturday)
month: 1-12 (January-December)
day: 1-31
year: 0-99 (2000-2099)
hh: 0-23 (hours)
mm: 0-59 (minutes)
n: 0-365 (zero-based Julian day of the year. Leap days shall be
counted, and it is possible to refer to February 29).
Format 2 for recurring mode is used only in the dynamic entry and
should not be used in the static entry (with index 1). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(14) |
|
rlTimeZoneDaylightSavingTimeEnd |
1.3.6.1.4.1.171.10.94.89.89.92.1.15.1.7 |
Daylight Saving Time start date.
In recurring mode (format 1): week wday month hh:mm
In recurring mode (format 2): RJul n hh:mm
In date mode: month day year hh:mm
week: 0-6 (0=First, 6=Last)
wday: 1-7 (Sunday-Saturday)
month: 1-12 (January-December)
day: 1-31
year: 0-99 (2000-2099)
hh: 0-23 (hours)
mm: 0-59 (minutes)
n: 0-365 (zero-based Julian day of the year. Leap days shall be
counted, and it is possible to refer to February 29).
Format 2 for recurring mode is used only in the dynamic entry and
should not be used in the static entry (with index 1). |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(14) |
|
rlTimeZoneDaylightSavingTimeOffset |
1.3.6.1.4.1.171.10.94.89.89.92.1.15.1.8 |
Daylight Saving Time - The number of minutes to add to
the clock during summer time. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
rlTimeZoneTZDSTOffset |
1.3.6.1.4.1.171.10.94.89.89.92.1.15.1.10 |
Local Time Zone and Daylight Saving Time offset in seconds. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlTimeZoneTimeZoneName |
1.3.6.1.4.1.171.10.94.89.89.92.1.15.1.11 |
Human readable string describing Local Time Zone and Daylight Saving Time. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..16) |
|
rlTimeZoneDataType |
1.3.6.1.4.1.171.10.94.89.89.92.1.15.1.12 |
The type of data in this entry: static or dynamic. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
static(1), dynamic(2) |
|
rlTimeZoneDataSourceIfIndex |
1.3.6.1.4.1.171.10.94.89.89.92.1.15.1.13 |
IfIndex of the interface through which the dynamic data of this row has been learned.
The value of this field will be 0 if rlTimeZoneTimeDataType is static (since it is
relevant only for dynamic entry), and this is the only value allowed for SET in this case. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlClockStatus |
1.3.6.1.4.1.171.10.94.89.89.92.1.16 |
Current status of the clock. The value 'invalid' means time is meaninglesss,
since it has neither been manually configured nor achieved as a result
of SNTP synchronization. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
invalid(1), manuallySet(2), synchronizedBySntp(3) |
|
rlDhcpTimezoneOptionEnabled |
1.3.6.1.4.1.171.10.94.89.89.92.1.17 |
Specifies whether the DHCP Timezone option (DHCPv4 option 100) is supported in the system.
Setting this value to FALSE, will clear Timezone and Summertime dynamic configuration,
so that:
1) rlTimeZoneTimeZoneCode and rlTimeZoneDaylightSavingTimeCode length will
be 0 for rlTimeZoneEntry whose index = 2 (dynamic entry).
2) the operative values of Timezone and Summertime will be those
statically configured. Thus, GET operations on the following
MIB scalars will result is static values:
rlTimeZone, rlTimeZoneCode, rlDaylightSavingTimeMode,
rlDaylightSavingTimeStart, rlDaylightSavingTimeEnd, rlDaylightSavingTimeOffset,
rlDaylightSavingTimeCode, rlTZDSTOffset. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
rlSntpNtpMibVersion |
1.3.6.1.4.1.171.10.94.89.89.92.2.1.1 |
SntpNtp Mib Version. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlSntpNtpConfigMode |
1.3.6.1.4.1.171.10.94.89.89.92.2.1.2 |
Current configuration operational mode of SNTP/NTP client. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), unicast(2), anycast(3), multicast(4), unicastAnycast(5), unicastMulticast(6), anycastMulticast(7), unicastAnycastMulticast(8) |
|
rlSntpNtpConfigSysStratum |
1.3.6.1.4.1.171.10.94.89.89.92.2.1.3 |
The stratum of the local clock. If the value is set
to 1, i.e., this is a primary reference, then the
Primary-Clock procedure described in Section 3.4.6,
in RFC-1305 is invoked. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
NTPStratum |
|
|
rlSntpNtpConfigPollInterval |
1.3.6.1.4.1.171.10.94.89.89.92.2.1.4 |
Period of time (in seconds) between succesive attempts to
perform an update via SNTP. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlSntpNtpConfigSyncSrvMrid |
1.3.6.1.4.1.171.10.94.89.89.92.2.1.10 |
The mrid of the synced server. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlSntpNtpConfigSyncSrvIfIndex |
1.3.6.1.4.1.171.10.94.89.89.92.2.1.11 |
The interface addressed of the synced server. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlSntpNtpConfigSrvEntry |
1.3.6.1.4.1.171.10.94.89.89.92.2.1.16.1 |
Entry in rlSntpNtpConfigSrvTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlSntpNtpConfigSrvEntry |
|
|
rlSntpNtpConfigSrvEntryType |
1.3.6.1.4.1.171.10.94.89.89.92.2.1.16.1.1 |
Server type: Synchronize Server or Primary Poll Server. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlSntpNtpSyncEntryType |
|
|
rlSntpNtpConfigSrvMrid |
1.3.6.1.4.1.171.10.94.89.89.92.2.1.16.1.4 |
The mrid of the server. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlSntpNtpConfigSrvIfIndex |
1.3.6.1.4.1.171.10.94.89.89.92.2.1.16.1.5 |
The interface addressed of the server. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlSntpClientMode |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.1 |
Current operational mode of SNTP client. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), active(2), passive(3) |
|
rlSntpUnicastAdminState |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.2 |
SNTP Unicast Administrative state - Enable/Disable SNTP.
In case of reinitializing polling or time
synchronization this MIB is modified. The MIB can
be enabled even thought it is already enabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
rlSntpBroadcastAdminState |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.3 |
SNTP Broadcast Administrative state - Enable/Disable SNTP.
In case of reinitializing polling or time
synchronization this MIB is modified. The MIB can
be enabled even thought it is already enabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
rlSntpAnycastAdminState |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.4 |
SNTP Anycast Administrative state - Enable/Disable SNTP.
In case of reinitializing polling or time
synchronization this MIB is modified. The MIB can
be enabled even thought it is already enabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
rlSntpUnicastPollState |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.5 |
SNTP Unicast poll state - TRUE for polled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
rlSntpAnycastPollState |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.7 |
SNTP Anycast poll state - TRUE for polled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
rlSntpAuthenticationState |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.8 |
SNTP authentication state- Enable/Disable SNTP. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
rlTimeValidFlag |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.9 |
Is time valid. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
rlSntpBroadcastEntry |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.10.1 |
Private paramters for interface:
sntp status, broadcast mode. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlSntpBroadcastEntry |
|
|
rlSntpBroadcastIfIndex |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.10.1.1 |
The interface addressed by this entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlSntpBroadcastIfAdminState |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.10.1.2 |
SNTP interface Adminstrative state- Enable/Disable SNTP.
In case of reinitializing polling or time
synchronization this MIB is modified. The MIB can
be enabled even thought it is already enabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
rlSntpBroadcastMode |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.10.1.3 |
SNTP/NTP Broadcast Mode.
none - no broadcast SNTP packets are received or sent.
Receive - host only receive SNTP packets that were sent
to broadcast address (were not directed to
the host). This is multicast mode in the RFC.
Send - host only send SNTP packets and wait for replies
directed to the host. This is anycast mode in
the RFC.
ReceiveSend - host receive broadcast messages (destination
is broadcast address in the received messages)
and send SNTP packets to wait for replies
directed to the host (destination address
of the reply is the host address). This mode
combines anycast and multicast modes in the
RFC. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), receive(2), send(3), receiveSend(4) |
|
rlSntpBroadcastPolled |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.10.1.4 |
TRUE if participating in polling cycle, else FALSE. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
rlSntpBroadcastAddress |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.10.1.5 |
Ip Address of a trusted SNTP server. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
rlSntpBroadcastStatus |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.10.1.8 |
The Operational State of the remote IP Address of
the SNTP Broadcast.
unknown - requests were not sent yet.
inProcess - replies were not received yet.
up - server sent SNTP packets.
down - server stopped sending SNTP packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), inProcess(2), up(3), down(4) |
|
rlSntpBroadcastOffset |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.10.1.9 |
The estimated offset of the server's clock relative to
the local clock, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
NTPTimeStamp |
|
|
rlSntpBroadcastDelay |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.10.1.10 |
The estimated round-trip delay of the server's clock
relative to the local clock over the network path
between them, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
NTPSignedTimeValue |
|
|
rlSntpBroadcastRowStatus |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.10.1.11 |
The Status of this SNTP broadcast interface
information. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
rlSntpAnycastEntry |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.11.1 |
Private paramters for interface:
server info. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlSntpAnycastEntry |
|
|
rlSntpAnycastIfIndex |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.11.1.1 |
The interface addressed by this entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlSntpAnycastAddress |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.11.1.2 |
Ip Address of a trusted SNTP server. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
rlSntpAnycastStatus |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.11.1.5 |
The Operational State of the remote IP Address of
the SNTP Anycast.
unknown - requests were not sent yet.
inProcess - replies were not received yet.
up - server sent SNTP packets.
down - server stopped sending SNTP packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), inProcess(2), up(3), down(4) |
|
rlSntpAnycastOffset |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.11.1.6 |
The estimated offset of the server's clock relative to
the local clock, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
NTPTimeStamp |
|
|
rlSntpAnycastDelay |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.11.1.7 |
The estimated round-trip delay of the server's clock
relative to the local clock over the network path
between them, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
NTPSignedTimeValue |
|
|
rlSntpAnycastRowStatus |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.11.1.8 |
The Status of this SNTP anycast interface
information. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
rlSntpConfigServerTable |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.12 |
A table containing trusted SNTP servers to be queried in
unicast or broadcast mode. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
RlSntpServerEntry |
|
rlSntpServerEntry |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.12.1 |
A trusted server. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlSntpServerEntry |
|
|
rlSntpServerAddress |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.12.1.1 |
Ip Address of a trusted SNTP server. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
rlSntpServerPolled |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.12.1.2 |
TRUE if participating in polling cycle, else FALSE. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
rlSntpServerStratum |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.12.1.3 |
The stratum of this server. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
NTPStratum |
|
|
rlSntpServerStatus |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.12.1.5 |
The Operational State of the remote IP Address of
the SNTP Server.
unknown - requests were not sent yet.
inProcess - replies were not received yet.
up - server sent SNTP packets.
down - server stopped sending SNTP packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), inProcess(2), up(3), down(4) |
|
rlSntpServersOffset |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.12.1.6 |
The estimated offset of the server's clock relative to
the local clock, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
NTPTimeStamp |
|
|
rlSntpServersDelay |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.12.1.7 |
The estimated round-trip delay of the server's clock
relative to the local clock over the network path
between them, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
NTPSignedTimeValue |
|
|
rlSntpServersKeyIdentifier |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.12.1.8 |
Authentication key identifier. The valid range is
1-4294967295.
Value zero, means no authentication is being done. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
rlSntpServerRowStatus |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.12.1.9 |
The Status of this SNTP server information. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
rlSntpAuthenticationEntry |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.13.1 |
Keys information for authenticationof NTP packets. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlSntpAuthenticationEntry |
|
|
rlSntpAuthenticationKeyID |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.13.1.1 |
The key identifier. Valid rabge for key identifier
is 1-4294967295. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..4294967295 |
|
rlSntpAuthenticationKeyState |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.13.1.3 |
Authentication key state - Enable/Disable key. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
rlSntpPort |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.14 |
User defined SNTP port. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
rlSntpBroadcastInetEntry |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.15.1 |
Private paramters for interface:
sntp status, broadcast mode. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlSntpBroadcastInetEntry |
|
|
rlSntpBroadcastInetIfIndex |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.15.1.1 |
The interface addressed by this entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlSntpBroadcastInetIfAdminState |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.15.1.2 |
SNTP interface Adminstrative state- Enable/Disable SNTP.
In case of reinitializing polling or time
synchronization this MIB is modified. The MIB can
be enabled even thought it is already enabled. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
rlSntpBroadcastInetMode |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.15.1.3 |
SNTP/NTP Broadcast Mode.
none - no broadcast SNTP packets are received or sent.
Receive - host only receive SNTP packets that were sent
to broadcast address (were not directed to
the host). This is multicast mode in the RFC.
Send - host only send SNTP packets and wait for replies
directed to the host. This is anycast mode in
the RFC.
ReceiveSend - host receive broadcast messages (destination
is broadcast address in the received messages)
and send SNTP packets to wait for replies
directed to the host (destination address
of the reply is the host address). This mode
combines anycast and multicast modes in the
RFC. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), receive(2), send(3), receiveSend(4) |
|
rlSntpBroadcastInetPolled |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.15.1.4 |
TRUE if participating in polling cycle, else FALSE. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
rlSntpBroadcastInetStatus |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.15.1.9 |
The Operational State of the remote IP Address of
the SNTP Broadcast.
unknown - requests were not sent yet.
inProcess - replies were not received yet.
up - server sent SNTP packets.
down - server stopped sending SNTP packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), inProcess(2), up(3), down(4) |
|
rlSntpBroadcastInetOffset |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.15.1.10 |
The estimated offset of the server's clock relative to
the local clock, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
NTPTimeStamp |
|
|
rlSntpBroadcastInetDelay |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.15.1.11 |
The estimated round-trip delay of the server's clock
relative to the local clock over the network path
between them, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
NTPSignedTimeValue |
|
|
rlSntpBroadcastInetRowStatus |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.15.1.12 |
The Status of this SNTP broadcast interface
information. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
rlSntpAnycastInetEntry |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.16.1 |
Private paramters for interface:
server info. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlSntpAnycastInetEntry |
|
|
rlSntpAnycastInetIfIndex |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.16.1.1 |
The interface addressed by this entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlSntpAnycastInetStatus |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.16.1.6 |
The Operational State of the remote IP Address of
the SNTP Anycast.
unknown - requests were not sent yet.
inProcess - replies were not received yet.
up - server sent SNTP packets.
down - server stopped sending SNTP packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), inProcess(2), up(3), down(4) |
|
rlSntpAnycastInetOffset |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.16.1.7 |
The estimated offset of the server's clock relative to
the local clock, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
NTPTimeStamp |
|
|
rlSntpAnycastInetDelay |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.16.1.8 |
The estimated round-trip delay of the server's clock
relative to the local clock over the network path
between them, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
NTPSignedTimeValue |
|
|
rlSntpAnycastInetRowStatus |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.16.1.9 |
The Status of this SNTP anycast interface
information. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
rlSntpServerInetEntry |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.17.1 |
A trusted server. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlSntpServerInetEntry |
|
|
rlSntpServerInetPolled |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.17.1.3 |
TRUE if participating in polling cycle, else FALSE. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
rlSntpServerInetStatus |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.17.1.6 |
The Operational State of the remote IP Address of
the SNTP Server.
unknown - requests were not sent yet.
inProcess - replies were not received yet.
up - server sent SNTP packets.
down - server stopped sending SNTP packets. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
unknown(1), inProcess(2), up(3), down(4) |
|
rlSntpServerInetOffset |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.17.1.7 |
The estimated offset of the server's clock relative to
the local clock, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
NTPTimeStamp |
|
|
rlSntpServerInetDelay |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.17.1.8 |
The estimated round-trip delay of the server's clock
relative to the local clock over the network path
between them, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
NTPSignedTimeValue |
|
|
rlSntpServerInetKeyIdentifier |
1.3.6.1.4.1.171.10.94.89.89.92.2.2.17.1.9 |
Authentication key identifier. The valid range is
1-4294967295.
Value zero, means no authentication is being done. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|