DHS3224-MIB

Imported modules

SNMPv2-SMI	SNMPv2-TC	DLINK-ID-REC-MIB
DLINKMGMT-MIB

Imported symbols

Counter32	Counter64	TimeTicks
NOTIFICATION-TYPE	IpAddress	MODULE-IDENTITY
OBJECT-TYPE	MacAddress	DisplayString
dlink	dlinkMgmtMIB

Defined Types

PortList
OCTET STRING	Size(0..127)

SwL2UnitInfoEntry
SEQUENCE
	swL2UnitInfoUnitIndex	INTEGER
	swL2UnitInfoFanStatus	INTEGER

SwL2PortInfoEntry
SEQUENCE
	swL2PortInfoUnitIndex	INTEGER
	swL2PortInfoModuleIndex	INTEGER
	swL2PortInfoPortIndex	INTEGER
	swL2PortInfoType	INTEGER
	swL2PortInfoDescr	DisplayString
	swL2PortInfoLinkStatus	INTEGER
	swL2PortInfoVDSLStatus	INTEGER
	swL2PortInfoEtherStatus	INTEGER

SwL2PortVDSLInfoEntry
SEQUENCE
	swL2PortVDSLInfoUnitIndex	INTEGER
	swL2PortVDSLInfoModuleIndex	INTEGER
	swL2PortVDSLInfoPortIndex	INTEGER
	swL2PortVDSLInfoUsTxPowerStatus	DisplayString
	swL2PortVDSLInfoDsTxPowerStatus	DisplayString
	swL2PortVDSLInfoUsSnrStatus	DisplayString
	swL2PortVDSLInfoDsSnrStatus	DisplayString

SwL2PortCtrlEntry
SEQUENCE
	swL2PortCtrlUnitIndex	INTEGER
	swL2PortCtrlModuleIndex	INTEGER
	swL2PortCtrlPortIndex	INTEGER
	swL2PortCtrlAdminState	INTEGER
	swL2PortCtrlNwayState	INTEGER
	swL2PortCtrlFlowCtrlState	INTEGER
	swL2PortCtrlBackPressState	INTEGER
	swL2PortCtrlVDSLPowerConfig	DisplayString

SwL2PortStEntry
SEQUENCE
	swL2PortStUnitIndex	INTEGER
	swL2PortStModuleIndex	INTEGER
	swL2PortStPortlndex	INTEGER
	swL2PortStRxBytes	Counter32
	swL2PortStRxPkts	Counter32
	swL2PortStRxCRCErrorPkts	Counter32
	swL2PortStRxMcastPkts	Counter32
	swL2PortStRxBcastPkts	Counter32
	swL2PortStRxUndersizePkts	Counter32
	swL2PortStRxOversizePkts	Counter32
	swL2PortStRxFragmentsPkts	Counter32
	swL2PortStRxJabbersPkts	Counter32
	swL2PortStRx64OctsPkts	Counter32
	swL2PortStRx65To127OctsPkts	Counter32
	swL2PortStRx128To255OctsPkts	Counter32
	swL2PortStRx256To511OctsPkts	Counter32
	swL2PortStRx512To1023OctsPkts	Counter32
	swL2PortStRx1024To1518OctsPkts	Counter32
	swL2PortStTxBytes	Counter32
	swL2PortStTxPkts	Counter32
	swL2PortStTxExDeferPkts	Counter32
	swL2PortStTxLateCollPkts	Counter32
	swL2PortStTxExCollPkts	Counter32
	swL2PortStTxSingleCollPkts	Counter32
	swL2PortStTxCollPkts	Counter32
	swL2PortStRxDropPkts	Counter32
	swL2PortStHCRxBytes	Counter64
	swL2PortStHCRxPkts	Counter64
	swL2PortStHCTxBytes	Counter64
	swL2PortStHCTxPkts	Counter64

SwL2PortLBtestEntry
SEQUENCE
	swL2PortLBtestUnitIndex	INTEGER
	swL2PortLBtestModuleIndex	INTEGER
	swL2PortLBtestPortIndex	INTEGER
	swL2PortLBtestLocalLBCtrlState	INTEGER
	swL2PortLBtestLocalLBCount	INTEGER
	swL2PortLBtestLocalLBStatus	INTEGER
	swL2PortLBtestLineLBCtrlState	INTEGER
	swL2PortLBtestLineLBCount	INTEGER
	swL2PortLBtestLineLBStatus	INTEGER

SwL2PortSecurityEntry
SEQUENCE
	swL2PortSecurityUnitIndex	INTEGER
	swL2PortSecurityModuleIndex	INTEGER
	swL2PortSecurityPortIndex	INTEGER
	swL2PortSecurityLockCtrlState	INTEGER
	swL2PortSecurityNumOfMac	INTEGER

SwL2IGMPCtrlEntry
SEQUENCE
	swL2IGMPCtrlVid	INTEGER
	swL2IGMPQuerierVersion	INTEGER
	swL2IGMPQueryInterval	INTEGER
	swIGMPRobustness	INTEGER
	swIGMPMaxResponseTime	INTEGER
	swL2IGMPCtrState	INTEGER

SwL2IGMPQueryInfoEntry
SEQUENCE
	swL2IGMPInfoVid	INTEGER
	swL2IGMPInfoQueryCount	INTEGER
	swL2IGMPInfoTxQueryCount	INTEGER

SwL2IGMPInfoEntry
SEQUENCE
	swL2IGMPVid	INTEGER
	swL2IGMPGroupIpAddr	IpAddress
	swL2IGMPMacAddr	MacAddress
	swL2IGMPPortMap	PortList
	swL2IGMPIpGroupReportCount	INTEGER

SwL2UcastFdbCtrlEntry
SEQUENCE
	swL2UcastFdbVid	INTEGER
	swL2UcastFdbMacIndex	MacAddress
	swL2UcastFdbUnit	INTEGER
	swL2UcastFdbModule	INTEGER
	swL2UcastFdbPort	INTEGER
	swL2UcastFdbStatus	INTEGER

SwL2FilterAddrCtrlEntry
SEQUENCE
	swL2FilterAddrVid	INTEGER
	swL2FilterAddrMacIndex	MacAddress
	swL2FilterAddrState	INTEGER

Defined Values

swL2MgmtMIB		1.3.6.1.4.1.171.11.38.2
The Structure of Layer 2 Network Management Information for the enterprise.
MODULE-IDENTITY

dhs3224e		1.3.6.1.4.1.171.11.38
OBJECT IDENTIFIER

swL2DevMgmt		1.3.6.1.4.1.171.11.38.2.1
OBJECT IDENTIFIER

swL2UnitMgmt		1.3.6.1.4.1.171.11.38.2.2
OBJECT IDENTIFIER

swL2PortMgmt		1.3.6.1.4.1.171.11.38.2.3
OBJECT IDENTIFIER

swL2IGMPMgmt		1.3.6.1.4.1.171.11.38.2.4
OBJECT IDENTIFIER

swL2UcastFdbMgmt		1.3.6.1.4.1.171.11.38.2.5
OBJECT IDENTIFIER

swL2FilterMgmt		1.3.6.1.4.1.171.11.38.2.6
OBJECT IDENTIFIER

swL2MgmtMIBTraps		1.3.6.1.4.1.171.11.38.2.10
OBJECT IDENTIFIER

swL2DevInfo		1.3.6.1.4.1.171.11.38.2.1.1
OBJECT IDENTIFIER

swDevInfoSystemUpTime		1.3.6.1.4.1.171.11.38.2.1.1.1
The value of sysUpTime at the time the switch entered its current operational state. If the current state was entered prior to the last re-initialization, then this object contains a zero value. This value is in units of seconds.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

swDevInfoTotalNumOfPort		1.3.6.1.4.1.171.11.38.2.1.1.2
The number of ports within this switch. This value is the sum of the ports within this switch.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swDevInfoNumOfPortInUse		1.3.6.1.4.1.171.11.38.2.1.1.3
The number of ports in this switch connected to the segment or the end stations.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swDevInfoConsoleInUse		1.3.6.1.4.1.171.11.38.2.1.1.4
This usage indication of console system.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), in-use(2), not-in-use(3)

swDevInfoFrontPanelLedStatus		1.3.6.1.4.1.171.11.38.2.1.1.5
This object is a set of system LED indications. The first two octets is defined as system LED . The first LED is power LED . The second LED is console LED . . The other octets following the first two octets are the logical port LED (following dot1dBasePort ordering) . Every two bytes are presented to a port. The first byte is presentd to the Link LED . The second byte is presented to the Activity LED . There is one byte per LED . The most significant bit is used for blink/solid: Off = The LED is lit permanently. On = The LED blinks. The three least significant bits are used for color: 1 = not lit, 2 = green, 3 = yellow,(orange) 4 = blue, 5 = red, 0+6+7 not used The four remaining bits are currently unused and must be 0 .
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..512)

swDevInfoSaveCfg		1.3.6.1.4.1.171.11.38.2.1.1.8
This object indicates the status of the device configuration. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. proceeding(2) - the device configuration is saving into the NV-RAM. completed(3) - all of the device configuration parameters have been saved into NV-RAM. failed(4) - The processing of saving device configuration is failed.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), proceeding(2), completed(3), failed(4)

swL2DevCtrl		1.3.6.1.4.1.171.11.38.2.1.2
OBJECT IDENTIFIER

swL2DevCtrlStpState		1.3.6.1.4.1.171.11.38.2.1.2.1
This object can be enabled or disabled spanning tree algorithm during runtime of the system.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), disabled(2), enabled(3)

swL2DevCtrlBcastStormCtrl		1.3.6.1.4.1.171.11.38.2.1.2.2
This object indicates broadcast storm control function is enabled or disabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), disabled(2), enabled(3)

swL2DevCtrlMcastStormCtrl		1.3.6.1.4.1.171.11.38.2.1.2.3
This object indicates multicast storm control function is enabled or disabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), disabled(2), enabled(3)

swL2DevCtrlProtoCapability		1.3.6.1.4.1.171.11.38.2.1.2.4
This object control which protocol capability will be enable (or disable) when the switch hub restart at the startup (power on) or warm start . To change the value will immediately restart the device .
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), layer2-default(2), layer2-ieee8021q(3), layer3-ip-ipx-default-routing(4), layer3-ip-ipx-ieee8021q-routing(5)

swL2DevCtrlSaveCfg		1.3.6.1.4.1.171.11.38.2.1.2.5
As the object is set to active, the current device configuration is save into to NV-RAM.If set to normal, do nothing.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normal(1), active(2)

swL2DevCtrlCleanAllStatisticCounter		1.3.6.1.4.1.171.11.38.2.1.2.6
As the object is set to active, all the statistic counters will be cleared. If set to normal, do nothing.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	normal(1), active(2)

swL2DevCtrlIGMPSnooping		1.3.6.1.4.1.171.11.38.2.1.2.7
This object indicates layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled .
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), disabled(2), enabled(3)

swL2DevAlarm		1.3.6.1.4.1.171.11.38.2.1.3
OBJECT IDENTIFIER

swL2DevAlarmNewRoot		1.3.6.1.4.1.171.11.38.2.1.3.1
When the device has become the new root of the Spanning Tree, this object decide whether to send a new root trap.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), disabled(2), enabled(3)

swL2DevAlarmTopologyChange		1.3.6.1.4.1.171.11.38.2.1.3.2
This object determine to send a trap or not when the switch topology was changed. If the object is enabled(3), the topologyChange trap is sent by the device when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. For the same port tranition, the device doesn't send the trap if this object value is disabled or other.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), disabled(2), enabled(3)

swL2UnitInfoTable		1.3.6.1.4.1.171.11.38.2.2.1
A table that contains information about every unit.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwL2UnitInfoEntry

swL2UnitInfoEntry		1.3.6.1.4.1.171.11.38.2.2.1.1
A list of information for each unit of the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SwL2UnitInfoEntry

swL2UnitInfoUnitIndex		1.3.6.1.4.1.171.11.38.2.2.1.1.1
This object indicates the unit number .(1..Max unit number)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

swL2UnitInfoFanStatus		1.3.6.1.4.1.171.11.38.2.2.1.1.2
This object indicates the status of the Fan. good(1) - The is fan working . fail(2) - The is fan failed.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	fail(0), good(1)

swL2PortInfoTable		1.3.6.1.4.1.171.11.38.2.3.1
A table that contains information about every port.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwL2PortInfoEntry

swL2PortInfoEntry		1.3.6.1.4.1.171.11.38.2.3.1.1
A list of information for each port of the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SwL2PortInfoEntry

swL2PortInfoUnitIndex		1.3.6.1.4.1.171.11.38.2.3.1.1.1
Indicates ID of the unit in the device
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2PortInfoModuleIndex		1.3.6.1.4.1.171.11.38.2.3.1.1.2
Indicates ID of the module on the unit .(1..Max module number in the unit)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2PortInfoPortIndex		1.3.6.1.4.1.171.11.38.2.3.1.1.3
This object indicates the module's port number.(1..Max port number in the module)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2PortInfoType		1.3.6.1.4.1.171.11.38.2.3.1.1.4
This object indicates the connector type of this port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), portType-UTP(2), portType-AUI(3), portType-Fiber-MTRJ(4), portType-Fiber-SC(5), portType-Fiber-GBIC(6), portType-BNC(7), portType-VDSL(8)

swL2PortInfoDescr		1.3.6.1.4.1.171.11.38.2.3.1.1.5
Provides port type information in displayed string format
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

swL2PortInfoLinkStatus		1.3.6.1.4.1.171.11.38.2.3.1.1.6
This object indicates the port link status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), link-pass(2), link-fail(3)

swL2PortInfoVDSLStatus		1.3.6.1.4.1.171.11.38.2.3.1.1.7
This object indicates the VDSL port current speed
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	link-down(1), non-VDSL-port(2), vdsl-MODE0(3), vdsl-512K(4), vdsl-1M(5), vdsl-2M(6), vdsl-3M(7), vdsl-4M(8), vdsl-5M(9), vdsl-10M(10), vdsl-15M(11)

swL2PortInfoEtherStatus		1.3.6.1.4.1.171.11.38.2.3.1.1.8
This object indicates the Ethernet port current speed .
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	link-down(1), half-10Mbps-backp(2), full-10Mbps-802dot3x(3), half-100Mbps-backp(4), full-100Mbps-802dot3x(5), half-10Mbps-flowctrl-off(6), full-10Mbps-flowctrl-off(7), half-100Mbps-flowctrl-off(8), full-100Mbps-flowctrl-off(9), full-1000Mbps-f802dot3x(10), full-1000Mbps-flowctrl-off(11)

swL2PortVDSLInfoTable		1.3.6.1.4.1.171.11.38.2.3.2
A table that contains VDSL information about every port.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwL2PortVDSLInfoEntry

swL2PortVDSLInfoEntry		1.3.6.1.4.1.171.11.38.2.3.2.1
A list of VDSL information for each port of the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SwL2PortVDSLInfoEntry

swL2PortVDSLInfoUnitIndex		1.3.6.1.4.1.171.11.38.2.3.2.1.1
Indicates ID of the unit in the device
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2PortVDSLInfoModuleIndex		1.3.6.1.4.1.171.11.38.2.3.2.1.2
Indicates ID of the module on the unit .(1..Max module number in the unit)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2PortVDSLInfoPortIndex		1.3.6.1.4.1.171.11.38.2.3.2.1.3
This object indicates the module's port number.(1..Max port number in the module)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2PortVDSLInfoUsTxPowerStatus		1.3.6.1.4.1.171.11.38.2.3.2.1.4
VDSL port current US TX power display in string format The range of TX power is -55.00 ~ -90.00 dBm/Hz
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..6)

swL2PortVDSLInfoDsTxPowerStatus		1.3.6.1.4.1.171.11.38.2.3.2.1.5
VDSL port current DS TX power display in string format The range of TX power is -55.00 ~ -90.00 dBm/Hz
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..6)

swL2PortVDSLInfoUsSnrStatus		1.3.6.1.4.1.171.11.38.2.3.2.1.6
VDSL port current US SNR display in string format
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..6)

swL2PortVDSLInfoDsSnrStatus		1.3.6.1.4.1.171.11.38.2.3.2.1.7
VDSL port current DS SNR display in string format
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..6)

swL2PortCtrlTable		1.3.6.1.4.1.171.11.38.2.3.3
A table that contains control information about every port.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwL2PortCtrlEntry

swL2PortCtrlEntry		1.3.6.1.4.1.171.11.38.2.3.3.1
A list of control information for each port of the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SwL2PortCtrlEntry

swL2PortCtrlUnitIndex		1.3.6.1.4.1.171.11.38.2.3.3.1.1
Indicates ID of the unit in the device
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2PortCtrlModuleIndex		1.3.6.1.4.1.171.11.38.2.3.3.1.2
Indicates ID of the module on the unit.(1..Max module number in the unit)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2PortCtrlPortIndex		1.3.6.1.4.1.171.11.38.2.3.3.1.3
This object indicates the module's port number.(1..Max port number in the module)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2PortCtrlAdminState		1.3.6.1.4.1.171.11.38.2.3.3.1.4
This object decide the port enabled or disabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), disabled(2), enabled(3)

swL2PortCtrlNwayState		1.3.6.1.4.1.171.11.38.2.3.3.1.5
Chose the N-Way function mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), nway-enabled(2), nway-disabled-10Mbps-Half(3), nway-disabled-10Mbps-Full(4), nway-disabled-100Mbps-Half(5), nway-disabled-100Mbps-Full(6), nway-disabled-1Gigabps-Half(7), nway-disabled-1Gigabps-Full(8), nway-disabled-VDSL-Mode0(9), nway-disabled-VDSL-512K(10), nway-disabled-VDSL-1M(11), nway-disabled-VDSL-2M(12), nway-disabled-VDSL-3M(13), nway-disabled-VDSL-4M(14), nway-disabled-VDSL-5M(15), nway-disabled-VDSL-10M(16), nway-disabled-VDSL-15M(17)

swL2PortCtrlFlowCtrlState		1.3.6.1.4.1.171.11.38.2.3.3.1.6
Set IEEE 802.3x compliant flow control function as enabled or disabled. And IEEE 802.3x compliant flow control function work only when the port is in full duplex mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), disabled(2), enabled(3)

swL2PortCtrlBackPressState		1.3.6.1.4.1.171.11.38.2.3.3.1.7
Depending on this object determine to enable or disable the backpressure function when the port is working in half duplex mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), disabled(2), enabled(3)

swL2PortCtrlVDSLPowerConfig		1.3.6.1.4.1.171.11.38.2.3.3.1.8
Provides port VDSL DS TX power configuration in displayed string format The range of TX power is -55.00 ~ -90.00 dBm/Hz
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..6)

swL2PortStTable		1.3.6.1.4.1.171.11.38.2.3.4
A list of port statistic Counter entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwL2PortStEntry

swL2PortStEntry		1.3.6.1.4.1.171.11.38.2.3.4.1
This entry include all the port statistic Counter which support by the device, like Bytes received, Bytes Sent ...
Status: current	Access: not-accessible
OBJECT-TYPE
	SwL2PortStEntry

swL2PortStUnitIndex		1.3.6.1.4.1.171.11.38.2.3.4.1.1
This object indicates ID of the unit in the device
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2PortStModuleIndex		1.3.6.1.4.1.171.11.38.2.3.4.1.2
This object indicates ID of the module on the unit.(1..Max module number in the unit)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2PortStPortlndex		1.3.6.1.4.1.171.11.38.2.3.4.1.3
This object indicates the module's port number.(1..Max port number in the module)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2PortStRxBytes		1.3.6.1.4.1.171.11.38.2.3.4.1.4
This counter is incremented once for every data octet of good packets received .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStRxPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.5
This counter is incremented once for every received good packet .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStRxCRCErrorPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.6
This counter is incremented once for every received packet which has invalid CRC .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStRxMcastPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.7
This counter is incremented once for every received packet which has multicast destination MAC address .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStRxBcastPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.8
This counter is incremented once for every received packet which has broadcast destination MAC address (0xFFFFFFFFFFFF).
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStRxUndersizePkts		1.3.6.1.4.1.171.11.38.2.3.4.1.9
This counter is incremented once for every received packet which meets any one the following conditions: 1.Receive byte count < 64 bytes and not CRC error . 2.Receive byte count < 68 bytes and tag packet and not CRC error .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStRxOversizePkts		1.3.6.1.4.1.171.11.38.2.3.4.1.10
This counter is incremented once for every received packet which meets any one the following conditions: 1.Receive byte count >1518 . 2.Receive byte count > 1522 and tag packet .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStRxFragmentsPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.11
This counter is incremented once for every received packet which meets any one the following conditions: 1.Receive byte count < 64 bytes and CRC error . 2.Receive byte count < 68 bytes and tag packet and CRC error .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStRxJabbersPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.12
This counter is incremented once for every received packet which meets any one the following conditions: 1.Receive byte count > 1518 and CRC error . 2.Receive byte count > 1522 bytes and tag packet and CRC error .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStRx64OctsPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.13
This counter is incremented once for every received packet with size of 64 bytes .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStRx65To127OctsPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.14
This counter is incremented once for every received packet with size of 65 to 127 bytes .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStRx128To255OctsPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.15
This counter is incremented once for every received packet with size of 128 to 255 bytes .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStRx256To511OctsPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.16
This counter is incremented once for every received packet with size of 256 to 511 bytes .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStRx512To1023OctsPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.17
This counter is incremented once for every received packet with size of 512 to 1023 bytes .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStRx1024To1518OctsPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.18
This counter is incremented once for every received packet with size of 1024 to 1536 bytes .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStTxBytes		1.3.6.1.4.1.171.11.38.2.3.4.1.19
This counter is incremented once for every data octet of a trans- mitted good packet .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStTxPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.20
This counter is incremented once for every transmitted good packet.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStTxExDeferPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.21
This counter is incremented once for every transmitted packet which excessive defer .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStTxLateCollPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.22
This counter is incremented once for every transmitted packet which has transmit late collision .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStTxExCollPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.23
This counter is incremented once for every transmitted packet which has transmit excessive collision .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStTxSingleCollPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.24
This counter is incremented once for every transmitted packet which has transmit collision count = 1 .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStTxCollPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.25
This counter is incremented once for every transmitted packet which has transmit collision .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStRxDropPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.26
This counter is incremented once for every received packet which has dropped for any reason .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

swL2PortStHCRxBytes		1.3.6.1.4.1.171.11.38.2.3.4.1.28
This high capacbility (64 bit) counter is incremented once for every data octet of good packets received .
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

swL2PortStHCRxPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.29
This high capability (64 bit) counter is incremented once for every received good packet.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

swL2PortStHCTxBytes		1.3.6.1.4.1.171.11.38.2.3.4.1.30
This high capability (64 bit) counter is incremented once for every data octet of a transmitted good packet .
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

swL2PortStHCTxPkts		1.3.6.1.4.1.171.11.38.2.3.4.1.31
This high capability (64 bit) counter is incremented once for every transmitted good packet.
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

swL2PortLBtestTable		1.3.6.1.4.1.171.11.38.2.3.5
A list of port Loop back test entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwL2PortLBtestEntry

swL2PortLBtestEntry		1.3.6.1.4.1.171.11.38.2.3.5.1
This entry include the configuatoin/status of port local loop back and line loop back test .
Status: current	Access: not-accessible
OBJECT-TYPE
	SwL2PortLBtestEntry

swL2PortLBtestUnitIndex		1.3.6.1.4.1.171.11.38.2.3.5.1.1
Indicates ID of the unit in the device
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2PortLBtestModuleIndex		1.3.6.1.4.1.171.11.38.2.3.5.1.2
Indicates ID of the module on the unit.(1..Max module number in the unit)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2PortLBtestPortIndex		1.3.6.1.4.1.171.11.38.2.3.5.1.3
This object indicates the module's port number.(1..Max port number in the module)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2PortLBtestLocalLBCtrlState		1.3.6.1.4.1.171.11.38.2.3.5.1.4
This object trigger the loop back test .
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), active(2)

swL2PortLBtestLocalLBCount		1.3.6.1.4.1.171.11.38.2.3.5.1.5
This object decide how many times of the local loop back test to proceed .
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..255

swL2PortLBtestLocalLBStatus		1.3.6.1.4.1.171.11.38.2.3.5.1.6
This status of local loop back test.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), proceeding(2), succeed(3), failed(4), ifUnstable(5)

swL2PortLBtestLineLBCtrlState		1.3.6.1.4.1.171.11.38.2.3.5.1.7
This object trigger the line loop back test .
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), active(2)

swL2PortLBtestLineLBCount		1.3.6.1.4.1.171.11.38.2.3.5.1.8
This object decide how many times of the line loop back test to proceed .
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..255

swL2PortLBtestLineLBStatus		1.3.6.1.4.1.171.11.38.2.3.5.1.9
This status of line loop back test.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), proceeding(2), succeed(3), failed(4), ifUnstable(5)

swL2PortSecurityTable		1.3.6.1.4.1.171.11.38.2.3.6
A list of port lock entries.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwL2PortSecurityEntry

swL2PortSecurityEntry		1.3.6.1.4.1.171.11.38.2.3.6.1
This entry include all the port lock infomation
Status: current	Access: not-accessible
OBJECT-TYPE
	SwL2PortSecurityEntry

swL2PortSecurityUnitIndex		1.3.6.1.4.1.171.11.38.2.3.6.1.1
Indicates ID of the unit in the device
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2PortSecurityModuleIndex		1.3.6.1.4.1.171.11.38.2.3.6.1.2
Indicates ID of the module on the unit.(1..Max module number in the unit)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2PortSecurityPortIndex		1.3.6.1.4.1.171.11.38.2.3.6.1.3
This object indicates the module's port number.(1..Max port number in the module)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2PortSecurityLockCtrlState		1.3.6.1.4.1.171.11.38.2.3.6.1.4
This object set the port Lock enable or disable .
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), disabled(2), enabled(3)

swL2PortSecurityNumOfMac		1.3.6.1.4.1.171.11.38.2.3.6.1.5
This object set the number of MAC of this port lock entry .
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..16

swL2IGMPMaxSupportedVlans		1.3.6.1.4.1.171.11.38.2.4.1
Maximum number of Vlans in the layer 2 IGMP control table (swL2IGMPCtrlTable) .
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2IGMPMaxIpGroupNumPerVlan		1.3.6.1.4.1.171.11.38.2.4.2
Maximum number of multicast ip group per Vlan in the layer 2 IGMP information table (swL2IGMPQueryInfoTable) .
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2IGMPCtrlTable		1.3.6.1.4.1.171.11.38.2.4.3
The table controls the Vlan's IGMP function. Its scale depends on current VLAN state (swL2VlanInfoStatus). If VLAN is disabled mode, there is only one entry in the table, with index 1. If VLAN is in Port-Base or 802.1q mode, the number of entries can be up to 12, with index range from 1 to 12.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwL2IGMPCtrlEntry

swL2IGMPCtrlEntry		1.3.6.1.4.1.171.11.38.2.4.3.1
The entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP capture switch (swL2DevCtrlIGMPSnooping) is enabled.
Status: current	Access: not-accessible
OBJECT-TYPE
	SwL2IGMPCtrlEntry

swL2IGMPCtrlVid		1.3.6.1.4.1.171.11.38.2.4.3.1.1
This object indicates the IGMP control entry's VLAN id. If VLAN is disabled , the Vid is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the Vid is arranged from 1 to 12 , fixed form. If VLAN is in 802.1q mode, the Vid setting can vary from 1 to 4094 by management user, and the Vid in each entry must be unique in the IGMP Control Table.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2IGMPQuerierVersion		1.3.6.1.4.1.171.11.38.2.4.3.1.2
The version of IGMP querier. 0 indicate Non querier
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..2

swL2IGMPQueryInterval		1.3.6.1.4.1.171.11.38.2.4.3.1.3
The timer value for sending IGMP query packet when none was sent by the multicast router in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer is expired. Please reference RFC2236-1997. And it recommends a default of 125 seconds. The timeout value must be at least 30 seconds.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	30..9999

swIGMPRobustness		1.3.6.1.4.1.171.11.38.2.4.3.1.4
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..255

swIGMPMaxResponseTime		1.3.6.1.4.1.171.11.38.2.4.3.1.5
The maximum query response time advertised in IGMPv2 queries on this interface.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..25

swL2IGMPCtrState		1.3.6.1.4.1.171.11.38.2.4.3.1.6
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - IGMP funtion is disabled for this entry. enable(3) - IGMP funtion is enabled for this entry.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), disable(2), enable(3)

swL2IGMPQueryInfoTable		1.3.6.1.4.1.171.11.38.2.4.4
The table contains the number current IGMP query packets which is captured by this device, as well as the IGMP query packets sent by the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwL2IGMPQueryInfoEntry

swL2IGMPQueryInfoEntry		1.3.6.1.4.1.171.11.38.2.4.4.1
Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN entry are all enabled.
Status: current	Access: not-accessible
OBJECT-TYPE
	SwL2IGMPQueryInfoEntry

swL2IGMPInfoVid		1.3.6.1.4.1.171.11.38.2.4.4.1.1
This object indicates the Vid of associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2IGMPInfoQueryCount		1.3.6.1.4.1.171.11.38.2.4.4.1.2
This object indicates the number of query packets received since the IGMP function enabled, in per-VLAN basis.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2IGMPInfoTxQueryCount		1.3.6.1.4.1.171.11.38.2.4.4.1.3
This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2IGMPInfoTable		1.3.6.1.4.1.171.11.38.2.4.5
The table containing current IGMP information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled. Note that the priority of IGMP table entries is lower than Filtering Table, i.e. if there is a table hash collision between the entries of IGMP Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of IGMP Table. See swL2FilterMgmt description also.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwL2IGMPInfoEntry

swL2IGMPInfoEntry		1.3.6.1.4.1.171.11.38.2.4.5.1
Information about current IGMP information which captured by this device , provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled.
Status: current	Access: not-accessible
OBJECT-TYPE
	SwL2IGMPInfoEntry

swL2IGMPVid		1.3.6.1.4.1.171.11.38.2.4.5.1.1
This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2IGMPGroupIpAddr		1.3.6.1.4.1.171.11.38.2.4.5.1.2
This object is identify group ip address which is captured from IGMP packet, in per-Vlan basis.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

swL2IGMPMacAddr		1.3.6.1.4.1.171.11.38.2.4.5.1.3
This object is identify mac address which is corresponding to swL2IGMPGroupIpAddr, in per-Vlan basis..
Status: current	Access: read-only
OBJECT-TYPE
	MacAddress

swL2IGMPPortMap		1.3.6.1.4.1.171.11.38.2.4.5.1.4
This object indicates which ports are belong to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port . Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.(Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) . The 4 octets is represent one unit port according its logic port . If the unit less 32 port , the other port don't care just fill zero .
Status: current	Access: read-only
OBJECT-TYPE
	PortList

swL2IGMPIpGroupReportCount		1.3.6.1.4.1.171.11.38.2.4.5.1.5
This object indicate how much report packet was receive by our device corresponding with this entry from IGMP function enabled, in per-Vlan basis. .
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2UcastFdbMaxSupportedEntries		1.3.6.1.4.1.171.11.38.2.5.1
Maximum number of entries in the Unicast MAC address forwarding table .
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2UcastFdbCurrentTotalEntries		1.3.6.1.4.1.171.11.38.2.5.2
Current applied number of entries in the MAC address forwarding table .
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2UcastFdbCtrlTable		1.3.6.1.4.1.171.11.38.2.5.3
This table defines for frames with specific unicast destination MAC address, the port that the frame will be forwarded to . Note that the priority of FDB table entries is lower than Filtering Table , i.e. if there is a table hash collision between the entries of FDB Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of FDB Table .
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwL2UcastFdbCtrlEntry

swL2UcastFdbCtrlEntry		1.3.6.1.4.1.171.11.38.2.5.3.1
A list of information about a specific unicast MAC address for which the switch has filtering information .
Status: current	Access: not-accessible
OBJECT-TYPE
	SwL2UcastFdbCtrlEntry

swL2UcastFdbVid		1.3.6.1.4.1.171.11.38.2.5.3.1.1
This object indicates the VLAN-ID.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..4094

swL2UcastFdbMacIndex		1.3.6.1.4.1.171.11.38.2.5.3.1.2
This object indicates a unicast MAC address for which the switch has forwarding information .
Status: current	Access: read-create
OBJECT-TYPE
	MacAddress

swL2UcastFdbUnit		1.3.6.1.4.1.171.11.38.2.5.3.1.3
Indicates ID of the unit in the device
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..6

swL2UcastFdbModule		1.3.6.1.4.1.171.11.38.2.5.3.1.4
Indicates ID of the module on the unit.(1..Max module number in the unit)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..2

swL2UcastFdbPort		1.3.6.1.4.1.171.11.38.2.5.3.1.5
This object indicates the module's port number.(1..Max port number in the module)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..24

swL2UcastFdbStatus		1.3.6.1.4.1.171.11.38.2.5.3.1.6
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	other(1), invalid(2), permanent(3)

swL2FilterAddrMaxSupportedEntries		1.3.6.1.4.1.171.11.38.2.6.1
Maximum number of entries in the MAC address filtering table (swL2FilterAddrCtrlTable) .
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2FilterAddrCurrentTotalEntries		1.3.6.1.4.1.171.11.38.2.6.2
Current applied number of entries in the MAC address filtering table .
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

swL2FilterAddrCtrlTable		1.3.6.1.4.1.171.11.38.2.6.3
This table defines information for the device to filter packets with specific MAC address (either as the DA and/or as the SA) . The MAC address can be a unicast address or a multicast address .This table has higher priority than both static FDB table and IGMP table . It means that if a MAC address appears on this table also appears on the static FDB table , the device will use the information provide by this table to process the packet .
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwL2FilterAddrCtrlEntry

swL2FilterAddrCtrlEntry		1.3.6.1.4.1.171.11.38.2.6.3.1
A list of information about a specific unicast/multicast MAC address for which the switch has filtering information .
Status: current	Access: not-accessible
OBJECT-TYPE
	SwL2FilterAddrCtrlEntry

swL2FilterAddrVid		1.3.6.1.4.1.171.11.38.2.6.3.1.1
This object indicates the VLAN-ID. If VLAN is in disabled mode, the object indicates the default VLAN-ID (0) .
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..4094

swL2FilterAddrMacIndex		1.3.6.1.4.1.171.11.38.2.6.3.1.2
This object indicates a unicast/multicast MAC address for which the switch has filtering information . But if the swL2FilterAddrState = src-addr then the object can not be a multicast MAC address .
Status: current	Access: read-write
OBJECT-TYPE
	MacAddress

swL2FilterAddrState		1.3.6.1.4.1.171.11.38.2.6.3.1.3
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values . dst-addr(2) - recieved frames's destination address are currently used to be filtered as it meets with the MAC address entry of the table . src-addr(3) - recieved frames's source address are currently used to be filtered as it meets with the MAC address entry of the table . dst-src-addr(4) - recieved frames's destination address or source address are currently used to be filtered as it meets with the MAC address entry of the table . invalid(5) - writing this value to the object, and then the corresponding entry will be removed from the table .
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), dst-addr(2), src-addr(3), dst-src-addr(4), invalid(5)

swL2MgmtMIBTrapPrefix		1.3.6.1.4.1.171.11.38.2.10.0
OBJECT IDENTIFIER

swL2FANFail		1.3.6.1.4.1.171.11.38.2.10.0.1
The trap is sent whenever the fan is fail.
Status: current	Access: read-write
NOTIFICATION-TYPE

swL2FANWorking		1.3.6.1.4.1.171.11.38.2.10.0.2
The trap is sent whenever the fan is working normally .
Status: current	Access: read-write
NOTIFICATION-TYPE