DHCP-RELAY-MGMT-MIB

File: DHCP-RELAY-MGMT-MIB.mib (38437 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1213-MIB
Q-BRIDGE-MIB DLINK-ID-REC-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE IpAddress
Unsigned32 Integer32 MacAddress
RowStatus DisplayString VlanId
dlink-common-mgmt

Defined Types

SwDHCPRelayCtrlEntry  
SEQUENCE    
  swDHCPRelayCtrlInterfaceName DisplayString
  swDHCPRelayCtrlServer IpAddress
  swDHCPRelayCtrlRowStatus RowStatus

SwDHCPRelayOption82PerPortRemoteIDEntry  
SEQUENCE    
  swDHCPRelayOption82PerPortRemoteIdPortIndex INTEGER
  swDHCPRelayOption82PerPortRemoteIdType INTEGER
  swDHCPRelayOption82PerPortRemoteIdValue DisplayString

SwDHCPRelayOption82CircuitIDEntry  
SEQUENCE    
  swDHCPRelayOption82PerPortCircuitIdPortIndex INTEGER
  swDHCPRelayOption82PerPortCircuitIdType INTEGER
  swDHCPRelayOption82PerPortCircuitIdValue DisplayString

SwDHCPRelayOption60DefEntry  
SEQUENCE    
  swDHCPRelayOption60DefRelayIp IpAddress
  swDHCPRelayOption60DefRowStatus RowStatus

SwDHCPRelayOption60Entry  
SEQUENCE    
  swDHCPRelayOption60String DisplayString
  swDHCPRelayOption60RelayIp IpAddress
  swDHCPRelayOption60MatchType INTEGER
  swDHCPRelayOption60RowStatus RowStatus

SwDHCPRelayOption61Entry  
SEQUENCE    
  swDHCPRelayOption61ClientType INTEGER
  swDHCPRelayOption61ClientID DisplayString
  swDHCPRelayOption61Mode INTEGER
  swDHCPRelayOption61RelayIp IpAddress
  swDHCPRelayOption61RowStatus RowStatus

SwDHCPRelayVlanCtrlEntry  
SEQUENCE    
  swDHCPRelayVlanCtrlServer IpAddress
  swDHCPRelayVlanCtrlVlanRangeList1to64 STRING
  swDHCPRelayVlanCtrlVlanRangeList65to128 STRING
  swDHCPRelayVlanCtrlVlanRangeList129to192 STRING
  swDHCPRelayVlanCtrlVlanRangeList193to256 STRING
  swDHCPRelayVlanCtrlVlanRangeList257to320 STRING
  swDHCPRelayVlanCtrlVlanRangeList321to384 STRING
  swDHCPRelayVlanCtrlVlanRangeList385to448 STRING
  swDHCPRelayVlanCtrlVlanRangeList449to512 STRING
  swDHCPRelayVlanCtrlRowStatus RowStatus

SwDHCPRelayPortStateCtrlEntry  
SEQUENCE    
  swDHCPRelayPortStateCtrlPortIndex INTEGER
  swDHCPRelayPortStateCtrlState INTEGER

SwDHCPRelaySendArpByCidEntry  
SEQUENCE    
  swDHCPRelaySendArpByCidInnerVid INTEGER

SwDHCPLocalRelayVlanEntry  
SEQUENCE    
  swDHCPLocalRelayVlanID VlanId
  swDHCPLocalRelayState INTEGER

SwDHCPLocalRelayOption82Entry  
SEQUENCE    
  swDHCPLocalRelayOption82PortIndex INTEGER
  swDHCPLocalRelayOption82Policy INTEGER

Defined Values

swDHCPRelayMIB 1.3.6.1.4.1.171.12.42
The structure of DHCP relay management for the proprietary enterprise.
MODULE-IDENTITY    

swDHCPRelayCtrl 1.3.6.1.4.1.171.12.42.1
OBJECT IDENTIFIER    

swDHCPRelayInfo 1.3.6.1.4.1.171.12.42.2
OBJECT IDENTIFIER    

swDHCPRelayMgmt 1.3.6.1.4.1.171.12.42.3
OBJECT IDENTIFIER    

swDHCPLocalRelayMgmt 1.3.6.1.4.1.171.12.42.4
OBJECT IDENTIFIER    

swDHCPRelayOption82 1.3.6.1.4.1.171.12.42.3.2
OBJECT IDENTIFIER    

swDHCPRelayOption60 1.3.6.1.4.1.171.12.42.3.3
OBJECT IDENTIFIER    

swDHCPRelayOption61 1.3.6.1.4.1.171.12.42.3.4
OBJECT IDENTIFIER    

swDHCPRelayState 1.3.6.1.4.1.171.12.42.1.1
This object indicates whether the DHCP relay function is enabled or disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swDHCPRelayHopCount 1.3.6.1.4.1.171.12.42.1.2
This object indicates the maximum number of router hops that the BOOTP packets can cross.
OBJECT-TYPE    
  INTEGER 1..16  

swDHCPRelayTimeThreshold 1.3.6.1.4.1.171.12.42.1.3
This object indicates the minimum time in seconds within which the switch must relay the DHCP request. If this time is exceeded, the switch will drop the DHCP packet.
OBJECT-TYPE    
  INTEGER 0..65535  

swDHCPRelayCtrlTable 1.3.6.1.4.1.171.12.42.3.1
This table indicates the IP address as a destination to forward (relay) DHCP packets to.
OBJECT-TYPE    
  SEQUENCE OF  
    SwDHCPRelayCtrlEntry

swDHCPRelayCtrlEntry 1.3.6.1.4.1.171.12.42.3.1.1
A list of information indicates the IP address as a destination to forward (relay) DHCP packets to.
OBJECT-TYPE    
  SwDHCPRelayCtrlEntry  

swDHCPRelayCtrlInterfaceName 1.3.6.1.4.1.171.12.42.3.1.1.1
This object indicates the name of the IP interface.
OBJECT-TYPE    
  DisplayString Size(0..12)  

swDHCPRelayCtrlServer 1.3.6.1.4.1.171.12.42.3.1.1.2
This object indicates the DHCP server IP address.
OBJECT-TYPE    
  IpAddress  

swDHCPRelayCtrlRowStatus 1.3.6.1.4.1.171.12.42.3.1.1.3
This object indicates the status of this entry.
OBJECT-TYPE    
  RowStatus  

swDHCPRelayOption82State 1.3.6.1.4.1.171.12.42.3.2.1
This object indicates whether the DHCP relay option 82 function is enabled or disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swDHCPRelayOption82CheckState 1.3.6.1.4.1.171.12.42.3.2.2
This object indicates whether the DHCP relay option 82 check function is enabled or disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swDHCPRelayOption82Policy 1.3.6.1.4.1.171.12.42.3.2.3
This object indicates the DHCP relay option 82 policy.
OBJECT-TYPE    
  INTEGER replace(1), drop(2), keep(3)  

swDHCPRelayOption82RemoteIDType 1.3.6.1.4.1.171.12.42.3.2.4
This object indicates the type of remote ID. If the type is default,the remote ID will be the Systemí»s MAC address. If the type is user-defined, the remote ID can be defined by writing to the swDHCPRelayOption82RemoteID object. If the type is vendor2, the remote ID will be the System Name. If the type is vendor3, the remote ID will configured in swDHCPRelayOption82PerPortRemoteIdTable
OBJECT-TYPE    
  INTEGER default(1), user-defined(2), vendor2(4), vendor3(5)  

swDHCPRelayOption82RemoteID 1.3.6.1.4.1.171.12.42.3.2.5
This object displays the current remote ID of the device. If swDHCPRelayOption82RemoteIDType is set to default, the value will be the MAC address of the device, and this object cannot be modified. If swDHCPRelayOption82RemoteIDType is set to vendor2, the remote ID will be theSystem Name., and this object cannot be modified.If swDHCPRelayOption82RemoteIDType is set to user-defined, a new value can be written to this object.
OBJECT-TYPE    
  DisplayString  

swDHCPRelayOption82CircuitIDType 1.3.6.1.4.1.171.12.42.3.2.6
This object indicates the type of circuit ID.If the type is default,the circuit ID will be the VLAN ID, Module ID and Port Number. If the type is user-defined ,the circuit ID can be defined by writing to the swDHCPRelayOption82CircuitId object.If the type is vendor1, the circuit ID will be the VLAN ID, Slot ID, Port Number and Systemí»s MAC address. If the type is vendor2, the circuit ID will be the Port Number.If the type is vendor3,the circuit ID will be configured in swDHCPRelayOption82PerPortCircuitIdTable If the type is vendor4, the circuit ID will be the System Name, Module ID, Port Number and Client VLAN ID. If the type is vendor5, the circuit ID will be the System Name, 'eth', Chassis ID, Slot ID, Port Number and Client VLAN ID. If the type is vendor6, the circuit ID will be the Port Name, VLAN ID, System Name, Slot ID, Sub Slot ID, Port Number.
OBJECT-TYPE    
  INTEGER default(1), user-defined(2), vendor1(3), vendor2(4), vendor3(5), vendor4(6), vendor5(7), vendor6(8)  

swDHCPRelayOption82CircuitID 1.3.6.1.4.1.171.12.42.3.2.7
This object displays the current circuit ID of the device. If swDHCPRelayOption82CircuitIDType is set to user-defined, a new value can be written to this object. If swDHCPRelayOption82CircuitIdType is set to other, the value will be display and cannot be modified.
OBJECT-TYPE    
  DisplayString  

swDHCPRelayOption82PerPortRemoteIdTable 1.3.6.1.4.1.171.12.42.3.2.8
This table is used to manage the DHCP relay Option82 Remote ID for each client.And this configure will override the configure of swDHCPRelayOption82RemoteId for this client.
OBJECT-TYPE    
  SEQUENCE OF  
    SwDHCPRelayOption82PerPortRemoteIDEntry

swDHCPRelayOption82PerPortRemoteIdEntry 1.3.6.1.4.1.171.12.42.3.2.8.1
This object lists indicates the DHCP relay Option82 Remote ID for each client.
OBJECT-TYPE    
  SwDHCPRelayOption82PerPortRemoteIDEntry  

swDHCPRelayOption82PerPortRemoteIdPortIndex 1.3.6.1.4.1.171.12.42.3.2.8.1.1
This object indicates the Client's port number.
OBJECT-TYPE    
  INTEGER  

swDHCPRelayOption82PerPortRemoteIdType 1.3.6.1.4.1.171.12.42.3.2.8.1.2
This object indicates the type of port's remote ID. If the type is vendor3, the remote ID can be defined by writing to the swDHCPRelayOption82PerPortRemoteIdValue object.
OBJECT-TYPE    
  INTEGER vendor3(5)  

swDHCPRelayOption82PerPortRemoteIdValue 1.3.6.1.4.1.171.12.42.3.2.8.1.3
This object displays the current remote ID of the special port. If swDHCPRelayOption82PerPortRemoteIdType is set to vendor3,a new value can be written to this object.
OBJECT-TYPE    
  DisplayString  

swDHCPRelayOption82PerPortCircuitIdTable 1.3.6.1.4.1.171.12.42.3.2.9
This table is used to manage the DHCP relay Option82 Circuit ID for each client.And this configure will override the configure of swDHCPRelayOption82CircuitId for this client.
OBJECT-TYPE    
  SEQUENCE OF  
    SwDHCPRelayOption82CircuitIDEntry

swDHCPRelayOption82PerPortCircuitIdEntry 1.3.6.1.4.1.171.12.42.3.2.9.1
This object lists indicates the DHCP relay Option82 Circuit ID for each client.
OBJECT-TYPE    
  SwDHCPRelayOption82CircuitIDEntry  

swDHCPRelayOption82PerPortCircuitIdPortIndex 1.3.6.1.4.1.171.12.42.3.2.9.1.1
This object indicates the module's port number.(1..Max port number in the module)
OBJECT-TYPE    
  INTEGER  

swDHCPRelayOption82PerPortCircuitIdType 1.3.6.1.4.1.171.12.42.3.2.9.1.2
This object indicates the type of client's circuit ID.If the type is vendor3,the circuit ID can be defined by writing to the swDHCPRelayOption82PerPortCircuitIdValue object.
OBJECT-TYPE    
  INTEGER vendor3(5)  

swDHCPRelayOption82PerPortCircuitIdValue 1.3.6.1.4.1.171.12.42.3.2.9.1.3
This object displays the current circuit ID of client. If swDHCPRelayOption82PerPortCircuitIdType is set to vendor3, a new value can be written to this object.
OBJECT-TYPE    
  DisplayString  

swDHCPRelayOption60State 1.3.6.1.4.1.171.12.42.3.3.1
This object indicates whether the DHCP relay option 60 function is enabled or disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swDHCPRelayOption60DefMode 1.3.6.1.4.1.171.12.42.3.3.2
This object indicates default mode that has no option 60 matching rules. relay (1): means to relay the packet to the IP address which is specified by swDHCPRelayOption60DefRelayIp. drop (2): means to drop the packet.
OBJECT-TYPE    
  INTEGER relay(1), drop(2)  

swDHCPRelayOption60DefTable 1.3.6.1.4.1.171.12.42.3.3.3
This table indicates the default relay servers for the packet that has no option 60 matching rules.
OBJECT-TYPE    
  SEQUENCE OF  
    SwDHCPRelayOption60DefEntry

swDHCPRelayOption60DefEntry 1.3.6.1.4.1.171.12.42.3.3.3.1
A list of information indicates the default relay servers for the packet that has no option 60 matching rules.
OBJECT-TYPE    
  SwDHCPRelayOption60DefEntry  

swDHCPRelayOption60DefRelayIp 1.3.6.1.4.1.171.12.42.3.3.3.1.1
This object indicates the IP address of the default relay server.
OBJECT-TYPE    
  IpAddress  

swDHCPRelayOption60DefRowStatus 1.3.6.1.4.1.171.12.42.3.3.3.1.2
This object indicates the status of this entry.
OBJECT-TYPE    
  RowStatus  

swDHCPRelayOption60Table 1.3.6.1.4.1.171.12.42.3.3.4
This table indicates the relay servers for the packet for option 60 rules.
OBJECT-TYPE    
  SEQUENCE OF  
    SwDHCPRelayOption60Entry

swDHCPRelayOption60Entry 1.3.6.1.4.1.171.12.42.3.3.4.1
A list of information indicates the relay servers for the packet for option 60 rules.
OBJECT-TYPE    
  SwDHCPRelayOption60Entry  

swDHCPRelayOption60String 1.3.6.1.4.1.171.12.42.3.3.4.1.1
This object indicates the string of this entry. Note that it is theoretically possible for a valid string to exceed the allowed length of an SNMP object identifier, and thus be impossible to represent in tables in this MIB that are indexed by string.
OBJECT-TYPE    
  DisplayString  

swDHCPRelayOption60RelayIp 1.3.6.1.4.1.171.12.42.3.3.4.1.2
This object indicates the IP address of the relay server.
OBJECT-TYPE    
  IpAddress  

swDHCPRelayOption60MatchType 1.3.6.1.4.1.171.12.42.3.3.4.1.3
This object indicates the match state of this entry. exact (1): Means the option 60 string in the packet must fully match the specified string. partial (2): Means the option 60 string in the packet only needs to partially match the specified string.
OBJECT-TYPE    
  INTEGER exact(1), partial(2)  

swDHCPRelayOption60RowStatus 1.3.6.1.4.1.171.12.42.3.3.4.1.4
This object indicates the status of this entry.
OBJECT-TYPE    
  RowStatus  

swDHCPRelayOption61State 1.3.6.1.4.1.171.12.42.3.4.1
This object indicates whether the DHCP relay option 61 function is enabled or disabled.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swDHCPRelayOption61DefMode 1.3.6.1.4.1.171.12.42.3.4.2
This object indicates the default mode has no option 61 matching rules. relay (1): Means to relay the packet to the IP address which is specified by swDHCPRelayOption61DefRelayIp. drop (2): Means to drop the packet.
OBJECT-TYPE    
  INTEGER relay(1), drop(2)  

swDHCPRelayOption61DefRelayIp 1.3.6.1.4.1.171.12.42.3.4.3
This object indicates the IP address of the default relay server has no option 61 matching rules. Pay attention to when swDHCPRelayOption61Mode is: relay (1): This object must be set together. drop (2): This object can not be set, and it always returns to '0.0.0.0'.
OBJECT-TYPE    
  IpAddress  

swDHCPRelayOption61Table 1.3.6.1.4.1.171.12.42.3.4.4
This table indicates the relay servers for the packet for option 61 rules.
OBJECT-TYPE    
  SEQUENCE OF  
    SwDHCPRelayOption61Entry

swDHCPRelayOption61Entry 1.3.6.1.4.1.171.12.42.3.4.4.1
A list of information indicates the relay servers for the packet for option 61 rules.
OBJECT-TYPE    
  SwDHCPRelayOption61Entry  

swDHCPRelayOption61ClientType 1.3.6.1.4.1.171.12.42.3.4.4.1.1
This object indicates the client type of this entry. mac (1): Means the client-ID which is the MAC address of a client. string (2): Means the client-ID which is specified string by an administrator.
OBJECT-TYPE    
  INTEGER mac(1), string(2)  

swDHCPRelayOption61ClientID 1.3.6.1.4.1.171.12.42.3.4.4.1.2
This object indicates the string of this entry. Note: When the swDHCPRelayOption61ClientType is mac (1), the format of this object should be XX.XX.XX.XX.XX.XX (MAC address). When the swDHCPRelayOption61ClientType is string (2), it is theoretically possible for a valid string to exceed the allowed length of an SNMP object identifier, and thus be impossible to represent in tables in this MIB that are indexed by the string.
OBJECT-TYPE    
  DisplayString  

swDHCPRelayOption61Mode 1.3.6.1.4.1.171.12.42.3.4.4.1.3
This object indicates mode of this entry. relay (1): Means to relay the packet to the IP address which is specified by swDHCPRelayOption61RelayIp. drop (2): Means to drop the packet.
OBJECT-TYPE    
  INTEGER relay(1), drop(2)  

swDHCPRelayOption61RelayIp 1.3.6.1.4.1.171.12.42.3.4.4.1.4
This object indicates the IP address of the relay server. Pay attention to when swDHCPRelayOption61Mode is: relay (1): This object must be set together. drop (2): This object can not be set, and it always returns to '0.0.0.0'.
OBJECT-TYPE    
  IpAddress  

swDHCPRelayOption61RowStatus 1.3.6.1.4.1.171.12.42.3.4.4.1.5
This object indicates the status of this entry.
OBJECT-TYPE    
  RowStatus  

swDHCPRelayVlanCtrlTable 1.3.6.1.4.1.171.12.42.3.5
This table indicates the IP address as a destination to forward (relay) DHCP packets to.
OBJECT-TYPE    
  SEQUENCE OF  
    SwDHCPRelayVlanCtrlEntry

swDHCPRelayVlanCtrlEntry 1.3.6.1.4.1.171.12.42.3.5.1
A list of information indicates the IP address as a destination to forward (relay) DHCP packets to.
OBJECT-TYPE    
  SwDHCPRelayVlanCtrlEntry  

swDHCPRelayVlanCtrlServer 1.3.6.1.4.1.171.12.42.3.5.1.1
This object indicates the DHCP server IP address.
OBJECT-TYPE    
  IpAddress  

swDHCPRelayVlanCtrlVlanRangeList1to64 1.3.6.1.4.1.171.12.42.3.5.1.2
This object indicates the VLAN range (1-512) that added the specific server.
OBJECT-TYPE    
  STRING Size(64)  

swDHCPRelayVlanCtrlVlanRangeList65to128 1.3.6.1.4.1.171.12.42.3.5.1.3
This object indicates the VLAN range (513-1024) that added the specific server.
OBJECT-TYPE    
  STRING Size(64)  

swDHCPRelayVlanCtrlVlanRangeList129to192 1.3.6.1.4.1.171.12.42.3.5.1.4
This object indicates the VLAN range (1025-1536) that added the specific server.
OBJECT-TYPE    
  STRING Size(64)  

swDHCPRelayVlanCtrlVlanRangeList193to256 1.3.6.1.4.1.171.12.42.3.5.1.5
This object indicates the VLAN range (1537-2048) that added the specific server.
OBJECT-TYPE    
  STRING Size(64)  

swDHCPRelayVlanCtrlVlanRangeList257to320 1.3.6.1.4.1.171.12.42.3.5.1.6
This object indicates the VLAN range (2049-2560) that added the specific server.
OBJECT-TYPE    
  STRING Size(64)  

swDHCPRelayVlanCtrlVlanRangeList321to384 1.3.6.1.4.1.171.12.42.3.5.1.7
This object indicates the VLAN range (2561-3072) that added the specific server.
OBJECT-TYPE    
  STRING Size(64)  

swDHCPRelayVlanCtrlVlanRangeList385to448 1.3.6.1.4.1.171.12.42.3.5.1.8
This object indicates the VLAN range (3073-3584) that added the specific server.
OBJECT-TYPE    
  STRING Size(64)  

swDHCPRelayVlanCtrlVlanRangeList449to512 1.3.6.1.4.1.171.12.42.3.5.1.9
This object indicates the VLAN range (3585-4096) that added the specific server.
OBJECT-TYPE    
  STRING Size(64)  

swDHCPRelayVlanCtrlRowStatus 1.3.6.1.4.1.171.12.42.3.5.1.10
This object indicates the status of this entry.
OBJECT-TYPE    
  RowStatus  

swDHCPRelayPortStateCtrlTable 1.3.6.1.4.1.171.12.42.3.6
This table is used to manage the DHCP relay state for each port.
OBJECT-TYPE    
  SEQUENCE OF  
    SwDHCPRelayPortStateCtrlEntry

swDHCPRelayPortStateCtrlEntry 1.3.6.1.4.1.171.12.42.3.6.1
This object lists the current ports in the switch and their corresponding DHCP relay state.
OBJECT-TYPE    
  SwDHCPRelayPortStateCtrlEntry  

swDHCPRelayPortStateCtrlPortIndex 1.3.6.1.4.1.171.12.42.3.6.1.1
This object indicates the module's port number.(1..Max port number in the module)
OBJECT-TYPE    
  INTEGER  

swDHCPRelayPortStateCtrlState 1.3.6.1.4.1.171.12.42.3.6.1.2
This object indicates the state of the DHCP relay of each port.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swDHCPRelaySendArpByCidTable 1.3.6.1.4.1.171.12.42.3.7
This table is used to manage the DHCP relay send ARP to DHCP Server include the inner vid.
OBJECT-TYPE    
  SEQUENCE OF  
    SwDHCPRelaySendArpByCidEntry

swDHCPRelaySendArpByCidEntry 1.3.6.1.4.1.171.12.42.3.7.1
This object lists the current each DHCP Server configuration inner vid.
OBJECT-TYPE    
  SwDHCPRelaySendArpByCidEntry  

swDHCPRelaySendArpByCidInnerVid 1.3.6.1.4.1.171.12.42.3.7.1.1
This object indicates the inner vid or null vid. 0: not insert inner vid. 1-4094: inner vid.
OBJECT-TYPE    
  INTEGER 0..4094  

swDHCPLocalRelayGlobalState 1.3.6.1.4.1.171.12.42.4.1
This object indicates the state of the DHCP local relay function of the switch.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swDHCPLocalRelayVlanTable 1.3.6.1.4.1.171.12.42.4.2
This table is used to manage the DHCP local relay status for each VLAN.
OBJECT-TYPE    
  SEQUENCE OF  
    SwDHCPLocalRelayVlanEntry

swDHCPLocalRelayVlanEntry 1.3.6.1.4.1.171.12.42.4.2.1
This object lists the current VLANs in the switch and their corresponding DHCP local relay status.
OBJECT-TYPE    
  SwDHCPLocalRelayVlanEntry  

swDHCPLocalRelayVlanID 1.3.6.1.4.1.171.12.42.4.2.1.1
This object indicates the VLAN ID.
OBJECT-TYPE    
  VlanId  

swDHCPLocalRelayState 1.3.6.1.4.1.171.12.42.4.2.1.2
This object indicates the state of the DHCP relay function of the specified VLAN.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

swDHCPLocalRelayOption82Table 1.3.6.1.4.1.171.12.42.4.3
This table is used to manage the DHCP local relay option 82 policy for each port.
OBJECT-TYPE    
  SEQUENCE OF  
    SwDHCPLocalRelayOption82Entry

swDHCPLocalRelayOption82Entry 1.3.6.1.4.1.171.12.42.4.3.1
This object lists the current ports in the switch and their corresponding DHCP local relay option 82 policy.
OBJECT-TYPE    
  SwDHCPLocalRelayOption82Entry  

swDHCPLocalRelayOption82PortIndex 1.3.6.1.4.1.171.12.42.4.3.1.1
This object indicates the module's port number.(1..Max port number in the module)
OBJECT-TYPE    
  INTEGER 0..65535  

swDHCPLocalRelayOption82Policy 1.3.6.1.4.1.171.12.42.4.3.1.2
This object indicates the policy of the DHCP local relay option 82 of each port.
OBJECT-TYPE    
  INTEGER replace(1), drop(2), keep(3)