VplsConfigEntry |
|
SEQUENCE |
|
|
|
|
vplsConfigIndex |
Unsigned32 |
|
|
vplsConfigName |
SnmpAdminString |
|
|
vplsConfigDescr |
SnmpAdminString |
|
|
vplsConfigAdminStatus |
INTEGER |
|
|
vplsConfigMacLearning |
TruthValue |
|
|
vplsConfigDiscardUnknownDest |
TruthValue |
|
|
vplsConfigMacAging |
TruthValue |
|
|
vplsConfigFwdFullHighWatermark |
Unsigned32 |
|
|
vplsConfigFwdFullLowWatermark |
Unsigned32 |
|
|
vplsConfigRowStatus |
RowStatus |
|
|
vplsConfigMtu |
Unsigned32 |
|
|
vplsConfigVpnId |
VPNIdOrZero |
|
|
vplsConfigStorageType |
StorageType |
|
VplsBgpADConfigEntry |
|
SEQUENCE |
|
|
|
|
vplsBgpADConfigRouteDistinguisher |
VplsBgpRouteDistinguisher |
|
|
vplsBgpADConfigPrefix |
Unsigned32 |
|
|
vplsBgpADConfigVplsId |
VplsBgpRouteDistinguisher |
|
|
vplsBgpADConfigRowStatus |
RowStatus |
|
vplsConfigEntry |
1.3.6.1.4.1.171.10.120.100.4.1.1.2.1 |
A row in this table represents a Virtual Private Lan
Service(VPLS) in a packet network. It is indexed by
vplsConfigIndex, which uniquely identifies a single VPLS.
A row is created by the operator or by the agent if a
VPLS service is created by a non-SNMP application or
due to the Auto-Discovery process.
None of the read-create objects values can be
changed when vplsConfigRowStatus is in the active(1)
state. Changes are allowed when the vplsConfigRowStatus
is in notInService(2) or notReady(3) states only.
If the operator needs to change one of the values
for an active row the vplsConfigRowStatus should be
first changed to notInService(2), the objects may
then be changed, and finally the vplsConfigRowStatus
should be changed to active(1) in order to re-initiate
the signaling process with the new values in effect.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VplsConfigEntry |
|
|
vplsStatusEntry |
1.3.6.1.4.1.171.10.120.100.4.1.1.3.1 |
A row in this table represents a Virtual Private Lan
Service(VPLS) in a packet network. It is indexed by
vplsConfigIndex, which uniquely identifies a single VPLS.
A row in this table is automatically created by the agent
when a VPLS service is configured.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VplsStatusEntry |
|
|
vplsPwBindEntry |
1.3.6.1.4.1.171.10.120.100.4.1.1.4.1 |
Each row represents an association between a
VPLS instance and one or more pseudowires
defined in the pwTable. Each index is unique
in describing an entry in this table. However
both indexes are required to define the one
to many association of service to
pseudowire. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VplsPwBindEntry |
|
|
vplsBgpADConfigEntry |
1.3.6.1.4.1.171.10.120.100.4.1.1.5.1 |
A row in this table indicates that BGP based Auto-
Discovery is in use for this instance of VPLS.
A row in this table is indexed by vplsConfigIndex, which
uniquely identifies a single VPLS.
None of the read-create objects can be changed when
vplsBGPADConfigRowStatus is in active(1) state. Changes
are allowed when the vplsBGPADConfigRowStatus is in
notInService(2) or notReady(3) states only.
If the operator needs to change one of the values
for an active row the vplsConfigRowStatus should be
first changed to notInService(2), the objects may
then be changed, and finally the vplsConfigRowStatus
should be changed to active(1) in order to
re-initiate the signaling process with the new
values in effect.
|
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VplsBgpADConfigEntry |
|
|