DGS-6600-STP-EXT-MIB

File: DGS-6600-STP-EXT-MIB.mib (32056 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	SNMPv2-CONF
RFC1155-SMI	DGS-6600-ID-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Unsigned32
TimeTicks	RowStatus	TruthValue
MODULE-COMPLIANCE	OBJECT-GROUP	NOTIFICATION-GROUP
Counter	dgs6600-l2

Defined Types

BridgeId
OCTET STRING	Size(8)

SwMSTPInstanceCtrlEntry
SEQUENCE
	swMSTPInstId	INTEGER
	swMSTPInstVlanRangeList1to64	OCTET STRING
	swMSTPInstVlanRangeList65to128	OCTET STRING
	swMSTPInstVlanRangeList129to192	OCTET STRING
	swMSTPInstVlanRangeList193to256	OCTET STRING
	swMSTPInstVlanRangeList257to320	OCTET STRING
	swMSTPInstVlanRangeList321to384	OCTET STRING
	swMSTPInstVlanRangeList385to448	OCTET STRING
	swMSTPInstVlanRangeList449to512	OCTET STRING
	swMSTPInstType	INTEGER
	swMSTPInstStatus	INTEGER
	swMSTPInstPriority	INTEGER
	swMSTPInstDesignatedRootBridge	BridgeId
	swMSTPInstExternalRootCost	INTEGER
	swMSTPInstRegionalRootBridge	BridgeId
	swMSTPInstInternalRootCost	INTEGER
	swMSTPInstDesignatedBridge	BridgeId
	swMSTPInstRootPort	INTEGER
	swMSTPInstMaxAge	INTEGER
	swMSTPInstForwardDelay	INTEGER
	swMSTPInstLastTopologyChange	TimeTicks
	swMSTPInstTopChangesCount	Counter
	swMSTPInstRemainHops	INTEGER
	swMSTPInstRowStatus	RowStatus

SwMSTPPortEntry
SEQUENCE
	swMSTPPort	INTEGER
	swMSTPPortAdminHelloTime	INTEGER
	swMSTPPortOperHelloTime	INTEGER
	swMSTPSTPPortEnable	INTEGER
	swMSTPPortExternalPathCost	INTEGER
	swMSTPPortMigration	TruthValue
	swMSTPPortAdminEdgePort	INTEGER
	swMSTPPortOperEdgePort	INTEGER
	swMSTPPortAdminP2P	INTEGER
	swMSTPPortOperP2P	INTEGER
	swMSTPPortLBD	INTEGER
	swMSTPPortBPDUFiltering	INTEGER
	swMSTPPortRestrictedRole	TruthValue
	swMSTPPortRestrictedTCN	TruthValue
	swMSTPPortOperFilterBpdu	INTEGER
	swMSTPPortRecoverFilterBpdu	TruthValue

SwMSTPMstPortEntry
SEQUENCE
	swMSTPMstPort	INTEGER
	swMSTPMstPortInsID	INTEGER
	swMSTPMstPortDesignatedBridge	BridgeId
	swMSTPMstPortInternalPathCost	INTEGER
	swMSTPMstPortPriority	INTEGER
	swMSTPMstPortStatus	INTEGER
	swMSTPMstPortRole	INTEGER

Defined Values

dgs6600StpExtMIB		1.3.6.1.4.1.171.10.120.100.2.2
The MIB module for managing MSTP.
MODULE-IDENTITY

swMSTPGblMgmt		1.3.6.1.4.1.171.10.120.100.2.2.1
OBJECT IDENTIFIER

swMSTPCtrl		1.3.6.1.4.1.171.10.120.100.2.2.2
OBJECT IDENTIFIER

swMSTPStpAdminState		1.3.6.1.4.1.171.10.120.100.2.2.1.1
This object indicates the spanning tree state of the bridge.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), disabled(2), enabled(3)

swMSTPStpVersion		1.3.6.1.4.1.171.10.120.100.2.2.1.2
The version of Spanning Tree Protocol the bridge is currently running.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	stp(0), rstp(1), mstp(2)

swMSTPStpMaxAge		1.3.6.1.4.1.171.10.120.100.2.2.1.3
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that the range for this parameter is related to the value of StpForwardDelay and PortAdminHelloTime. MaxAge <= 2(ForwardDelay - 1);MaxAge >= 2(HelloTime + 1) The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value that is not a whole number of seconds.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	600..4000

swMSTPStpHelloTime		1.3.6.1.4.1.171.10.120.100.2.2.1.4
The value is used for HelloTime when this bridge is acting in RSTP or STP mode, in units of hundredths of a second. You can only read/write this value in RSTP or STP mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	100..1000

swMSTPStpForwardDelay		1.3.6.1.4.1.171.10.120.100.2.2.1.5
This value controls how long a port changes its spanning state from blocking to learning state and from learning to forwarding state. Note that the range for this parameter is related to MaxAge
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	400..3000

swMSTPStpMaxHops		1.3.6.1.4.1.171.10.120.100.2.2.1.6
This value applies to all spanning trees within an MST Region for which the bridge is the Regional Root.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..40

swMSTPStpTxHoldCount		1.3.6.1.4.1.171.10.120.100.2.2.1.7
The value used by the Port Transmit state machine to limit the maximum transmission rate.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..10

swMSTPStpForwardBPDU		1.3.6.1.4.1.171.10.120.100.2.2.1.8
The enabled/disabled status is used to forward BPDU to a non STP port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), disabled(2), enabled(3)

swMSTPStpLBD		1.3.6.1.4.1.171.10.120.100.2.2.1.9
The enabled/disabled status is used in Loop-back prevention.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), disabled(2), enabled(3)

swMSTPStpLBDRecoverTime		1.3.6.1.4.1.171.10.120.100.2.2.1.10
The period of time (in seconds) in which the STP module keeps checking the BPDU loop status. The valid range is 60 to 1000000. If this value is set from 1 to 59, you will get a 'bad value' return code. The value of zero is a special value that means to disable the auto-recovery mechanism for the LBD feature.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..1000000

swMSTPNniBPDUAddress		1.3.6.1.4.1.171.10.120.100.2.2.1.11
Specifies the BPDU MAC address of the NNI port in Q-in-Q status.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	dot1d(1), dot1ad(2)

swMSTPName		1.3.6.1.4.1.171.10.120.100.2.2.2.1
The object indicates the name of the MST Configuration Identification.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..32)

swMSTPRevisionLevel		1.3.6.1.4.1.171.10.120.100.2.2.2.2
The object indicates the revision level of the MST Configuration Identification.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

swMSTPInstanceCtrlTable		1.3.6.1.4.1.171.10.120.100.2.2.2.3
A table that contains MSTP instance information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwMSTPInstanceCtrlEntry

swMSTPInstanceCtrlEntry		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1
A list of MSTP instance information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SwMSTPInstanceCtrlEntry

swMSTPInstId		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.1
This object indicates the specific instance. An MSTP Instance ID (MSTID) of zero is used to identify the CIST.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..63

swMSTPInstVlanRangeList1to64		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.2
This object indicates the VLAN range (1-512) that belongs to the instance.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(64)

swMSTPInstVlanRangeList65to128		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.3
This object indicates the VLAN range (513-1024) that belongs to the instance.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(64)

swMSTPInstVlanRangeList129to192		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.4
This object indicates the VLAN range (1025-1536) that belongs to the instance.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(64)

swMSTPInstVlanRangeList193to256		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.5
This object indicates the VLAN range(1537-2048) that belongs to the instance.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(64)

swMSTPInstVlanRangeList257to320		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.6
This object indicates the VLAN range (2049-2560) that belongs to the instance.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(64)

swMSTPInstVlanRangeList321to384		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.7
This object indicates the VLAN range (2561-3072) that belongs to the instance.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(64)

swMSTPInstVlanRangeList385to448		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.8
This object indicates the VLAN range (3073-3584) that belongs to the instance.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(64)

swMSTPInstVlanRangeList449to512		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.9
This object indicates the VLAN range (3585-4096) that belongs to the instance.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(64)

swMSTPInstType		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.10
This object indicates the type of instance.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	cist(0), msti(1)

swMSTPInstStatus		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.11
The instance state that could be enabled/disabled.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swMSTPInstPriority		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.12
The priority of the instance. The priority must be divisible by 4096
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..61440

swMSTPInstDesignatedRootBridge		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.13
The bridge identifier of the CIST. For MST instance, this object is unused.
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

swMSTPInstExternalRootCost		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.14
The path cost between MST Regions from the transmitting bridge to the CIST Root. For MST instance this object is unused.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

swMSTPInstRegionalRootBridge		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.15
For CIST, Regional Root Identifier is the Bridge Identifier of the single bridge in a Region whose CIST Root Port is a Boundary Port, or the Bridge Identifier of the CIST Root if that is within the Region; For MSTI,MSTI Regional Root Identifier is the Bridge Identifier of the MSTI Regional Root for this particular MSTI in this MST Region; The Regional Root Bridge of this instance.
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

swMSTPInstInternalRootCost		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.16
For CIST, the internal path cost is the path cost to the CIST Regional Root; For MSTI, the internal path cost is the path cost to the MSTI Regional Root for this particular MSTI in this MST Region
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

swMSTPInstDesignatedBridge		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.17
The Bridge Identifier for the transmitting bridge for this CIST or MSTI
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

swMSTPInstRootPort		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.18
The port number of the port which offers the lowest cost path from this bridge to the CIST or MSTI root bridge.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

swMSTPInstMaxAge		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.19
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

swMSTPInstForwardDelay		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.20
This value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the forwarding state. The value determines how long the port stays in each of the listening and learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

swMSTPInstLastTopologyChange		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.21
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

swMSTPInstTopChangesCount		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.22
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
Status: current	Access: read-only
OBJECT-TYPE
	Counter

swMSTPInstRemainHops		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.23
The root bridge in the instance for MSTI always sends a BPDU with a maximum hop count. When a switch receives this BPDU, it decrements the received maximum hop count by one and propagates this value as the remaining hop count in the BPDUs it generates.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

swMSTPInstRowStatus		1.3.6.1.4.1.171.10.120.100.2.2.2.3.1.24
This object indicates the RowStatus of this entry.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

swMSTPPortTable		1.3.6.1.4.1.171.10.120.100.2.2.2.4
A table that contains port-specific information for the Spanning Tree Protocol.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwMSTPPortEntry

swMSTPPortEntry		1.3.6.1.4.1.171.10.120.100.2.2.2.4.1
A list of information maintained by every port about the Spanning Tree Protocol state for that port.
Status: current	Access: not-accessible
OBJECT-TYPE
	SwMSTPPortEntry

swMSTPPort		1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.1
The port number of the port for this entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

swMSTPPortAdminHelloTime		1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.2
The amount of time between the transmission of BPDU by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	100..1000

swMSTPPortOperHelloTime		1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.3
The actual value of the hello time.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	100..1000

swMSTPSTPPortEnable		1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.4
The enabled/disabled status of the port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swMSTPPortExternalPathCost		1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.5
The contribution of this port to the path cost of paths towards the CIST root which include this port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..200000000

swMSTPPortMigration		1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.6
When operating in MSTP mode or RSTP mode, writing TRUE(1) to this object forces this port to transmit MST BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

swMSTPPortAdminEdgePort		1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.7
The value of the Edge Port parameter. A value of TRUE indicates that this port should be assumed as an edge-port and a value of FALSE indicates that this port should be assumed as a non-edge-port
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	true(1), false(2), auto(3)

swMSTPPortOperEdgePort		1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.8
It is the acutual value of the edge port status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2), auto(3)

swMSTPPortAdminP2P		1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.9
The point-to-point status of the LAN segment attached to this port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	true(0), false(1), auto(2)

swMSTPPortOperP2P		1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.10
It is the actual value of the P2P status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	true(0), false(1), auto(2)

swMSTPPortLBD		1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.11
The enabled/disabled status is used for Loop-back prevention attached to this port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), disabled(2), enabled(3)

swMSTPPortBPDUFiltering		1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.12
The enabled/disabled status is used for BPDU Filtering attached to this port.BPDU filtering allows the administrator to prevent the system from sending or even receiving BPDUs on specified ports.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	other(1), disabled(2), enabled(3)

swMSTPPortRestrictedRole		1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.13
If TRUE, causes the port not to be selected as Root Port for the CIST or any MSTI, even it has the best spanning tree priority vector.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

swMSTPPortRestrictedTCN		1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.14
If TRUE, causes the port not to propagate received topology change notifications and topology changes to other Ports.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

swMSTPPortOperFilterBpdu		1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.15
It is the actual value of the hardware filter BPDU status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	receiving(1), filtering(2)

swMSTPPortRecoverFilterBpdu		1.3.6.1.4.1.171.10.120.100.2.2.2.4.1.16
When operating in BPDU filtering mode, writing TRUE(1) to this object sets this port to receive BPDUs to the hardware. Any other operation on this object has no effect and it will always return FALSE(2) when read.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

swMSTPMstPortTable		1.3.6.1.4.1.171.10.120.100.2.2.2.5
A table that contains port-specific information for the MST Protocol.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwMSTPMstPortEntry

swMSTPMstPortEntry		1.3.6.1.4.1.171.10.120.100.2.2.2.5.1
A list of information maintained by every port about the MST state for that port.
Status: current	Access: not-accessible
OBJECT-TYPE
	SwMSTPMstPortEntry

swMSTPMstPort		1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.1
The port number of the port for this entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

swMSTPMstPortInsID		1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.2
This object indicates the MSTP Instance ID (MSTID).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..63

swMSTPMstPortDesignatedBridge		1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.3
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment on the corresponding Spanning Tree instance.
Status: current	Access: read-only
OBJECT-TYPE
	BridgeId

swMSTPMstPortInternalPathCost		1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.4
This is the value of this port to the path cost of paths towards the MSTI root.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..200000000

swMSTPMstPortPriority		1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.5
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..240

swMSTPMstPortStatus		1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.6
When the port Enable state is enabled, the port's current state as defined by application of the Spanning Tree Protocol. If the PortEnable is disabled, the port status will be no-stp-enabled (7). If the port is in error disabled status, the port status will be err-disable(8)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), disabled(2), discarding(3), learning(4), forwarding(5), broken(6), no-stp-enabled(7), err-disabled(8)

swMSTPMstPortRole		1.3.6.1.4.1.171.10.120.100.2.2.2.5.1.7
When the port Enable state is enabled, the port's current port role as defined by application of the Spanning Tree Protocol. If the Port Enable state is disabled, the port role will be nonstp(5)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), alternate(1), backup(2), root(3), designated(4), master(5), nonstp(6), loopback(7)

swMSTPTraps		1.3.6.1.4.1.171.10.120.100.2.2.11
OBJECT IDENTIFIER

swMSTPNotify		1.3.6.1.4.1.171.10.120.100.2.2.11.1
OBJECT IDENTIFIER

swMSTPNotifyPrefix		1.3.6.1.4.1.171.10.120.100.2.2.11.1.0
OBJECT IDENTIFIER

swMSTPPortLBDTrap		1.3.6.1.4.1.171.10.120.100.2.2.11.1.0.1
When STP port loopback detect is enabled, a trap will be generated.
Status: current	Access: read-only
NOTIFICATION-TYPE

swMSTPPortBackupTrap		1.3.6.1.4.1.171.10.120.100.2.2.11.1.0.2
When the STP port role goes to backup (defined in the STP standard), a trap will be generated.
Status: current	Access: read-only
NOTIFICATION-TYPE

swMSTPPortAlternateTrap		1.3.6.1.4.1.171.10.120.100.2.2.11.1.0.3
When the STP port role goes to alternate (defined in the STP standard), a trap will be generated.
Status: current	Access: read-only
NOTIFICATION-TYPE

swMSTPHwFilterStatusChange		1.3.6.1.4.1.171.10.120.100.2.2.11.1.0.4
This trap is sent when a BPDU hardware filter status port changes.
Status: current	Access: read-only
NOTIFICATION-TYPE

swMSTPRootRestrictedChange		1.3.6.1.4.1.171.10.120.100.2.2.11.1.0.5
This trap is sent when a restricted role state port changes.
Status: current	Access: read-only
NOTIFICATION-TYPE