DGPRPM-MIB

File: DGPRPM-MIB.mib (17931 bytes)

Imported modules

RFC-1215	RFC1213-MIB	RFC-1212
RFC1155-SMI

Imported symbols

TRAP-TYPE	DisplayString	OBJECT-TYPE
enterprises

Defined Types

RpmEntry
SEQUENCE
	rpmID	INTEGER
	rpmOutletNumber	INTEGER
	rpmOutletState	DisplayString
	rpmControlType	DisplayString
	rpmInternetLocal	DisplayString
	rpmName	DisplayString
	rpmOutletA	DisplayString
	rpmOutletB	DisplayString
	rpmOutletC	DisplayString
	rpmOutletD	DisplayString
	rpmOutletE	DisplayString
	rpmOutletF	DisplayString
	rpmOutletG	DisplayString
	rpmOutletH	DisplayString
	rpmDelayA	INTEGER
	rpmDelayB	INTEGER
	rpmDelayC	INTEGER
	rpmDelayD	INTEGER
	rpmDelayE	INTEGER
	rpmDelayF	INTEGER
	rpmDelayG	INTEGER
	rpmDelayH	INTEGER
	rpmResumeDelayA	INTEGER
	rpmResumeDelayB	INTEGER
	rpmResumeDelayC	INTEGER
	rpmResumeDelayD	INTEGER
	rpmResumeDelayE	INTEGER
	rpmResumeDelayF	INTEGER
	rpmResumeDelayG	INTEGER
	rpmResumeDelayH	INTEGER

AccessEntry
SEQUENCE
	accessNo	INTEGER
	community	DisplayString
	permission	INTEGER

RpmScheduleEntry
SEQUENCE
	rpmScheduleIndex	INTEGER
	rpmScheduleID	INTEGER
	rpmOutlet	INTEGER
	rpmOutletAction	INTEGER
	rpmPeriod	INTEGER
	rpmDate	DisplayString
	rpmTime	DisplayString
	rpmStatus	INTEGER

CpsEntry
SEQUENCE
	cpsID	INTEGER
	cpsValue	INTEGER
	cpsThreshold1	INTEGER
	cpsThreshold2	INTEGER

CpsSetEntry
SEQUENCE
	cpsIDIndex	INTEGER
	cpsSetThreshold1	INTEGER
	cpsSetThreshold2	INTEGER

Defined Values

dgp		1.3.6.1.4.1.17420
OBJECT IDENTIFIER

products		1.3.6.1.4.1.17420.1
OBJECT IDENTIFIER

hardware		1.3.6.1.4.1.17420.1.1
OBJECT IDENTIFIER

rpm		1.3.6.1.4.1.17420.1.1.3
OBJECT IDENTIFIER

cps		1.3.6.1.4.1.17420.1.1.4
OBJECT IDENTIFIER

protocol		1.3.6.1.4.1.17420.1.1.1
select protocol
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	ups01(0), ups02(1), rpm(2), cps(3), ats(4)

rpmNumber		1.3.6.1.4.1.17420.1.1.3.1
Indicate how many rpm attached to this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rpmTable		1.3.6.1.4.1.17420.1.1.3.2
The number of entries is contained in the rpmNumber OID.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RpmEntry

accessTable		1.3.6.1.4.1.17420.1.1.999.1.1
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AccessEntry

rpmEntry		1.3.6.1.4.1.17420.1.1.3.2.1
An entry containing information of an rpm.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RpmEntry

rpmID		1.3.6.1.4.1.17420.1.1.3.2.1.1
The ID number of rpm.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..16

rpmOutletNumber		1.3.6.1.4.1.17420.1.1.3.2.1.2
The number of outlets for the rpm.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rpmOutletState		1.3.6.1.4.1.17420.1.1.3.2.1.3
Getting this OID will cause the status of all outlets to be returned. This OID is provided for informational purposes only. The format of the data returned is a character string consisting of a character from '0' to '3'. '0' if the outlet is off. '1' if the outlet is on. '2' if the outlet is in shutdown pending state. '3' if the outlet is fault. A comma character will delimit each outlet entry in the string. For exampe: If the returned string is '1,2,0,3', it means the iSwith has 4 outlets and the outlets status are the following: outlet 1 is on, outlet 2 is in shutdown pending state, outlet 3 is off, outlet 4 is fault.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

rpmControlType		1.3.6.1.4.1.17420.1.1.3.2.1.4
Getting this OID will cause the status of all outlets to be returned. The format of the data returned is a character string consisting of a character from '0' to '2'. '0' if the outlet is instant shutdown. '1' if the outlet is safe shutdown. '2' if the outlet is safe reboot. A comma character will delimit each outlet entry in the string. For exampe: If the returned string is '1,2,0,1', it means the iSwith has 4 outlets and the outlets status are the following: outlet 1 is safe shutdown, outlet 2 is safe reboot, outlet 3 is instant shutdown, outlet 4 is safe shutdown.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rpmInternetLocal		1.3.6.1.4.1.17420.1.1.3.2.1.5
Getting this OID will cause the status of all outlets to be returned. The format of the data returned is a character string consisting of a character from '0' to '1'. '0' if the outlet is Internet. '1' if the outlet is Local. A comma character will delimit each outlet entry in the string. For exampe: If the returned string is '1,1,0,1', it means the iSwith has 4 outlets and the outlets status are the following: outlet 1 is Local, outlet 2 is Local, outlet 3 is Internet, outlet 4 is Local.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rpmName		1.3.6.1.4.1.17420.1.1.3.2.1.6
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rpmOutletA		1.3.6.1.4.1.17420.1.1.3.2.1.7
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rpmOutletB		1.3.6.1.4.1.17420.1.1.3.2.1.8
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rpmOutletC		1.3.6.1.4.1.17420.1.1.3.2.1.9
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rpmOutletD		1.3.6.1.4.1.17420.1.1.3.2.1.10
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rpmOutletE		1.3.6.1.4.1.17420.1.1.3.2.1.11
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rpmOutletF		1.3.6.1.4.1.17420.1.1.3.2.1.12
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rpmOutletG		1.3.6.1.4.1.17420.1.1.3.2.1.13
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rpmOutletH		1.3.6.1.4.1.17420.1.1.3.2.1.14
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rpmDelayA		1.3.6.1.4.1.17420.1.1.3.2.1.15
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rpmDelayB		1.3.6.1.4.1.17420.1.1.3.2.1.16
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rpmDelayC		1.3.6.1.4.1.17420.1.1.3.2.1.17
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rpmDelayD		1.3.6.1.4.1.17420.1.1.3.2.1.18
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rpmDelayE		1.3.6.1.4.1.17420.1.1.3.2.1.19
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rpmDelayF		1.3.6.1.4.1.17420.1.1.3.2.1.20
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rpmDelayG		1.3.6.1.4.1.17420.1.1.3.2.1.21
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rpmDelayH		1.3.6.1.4.1.17420.1.1.3.2.1.22
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rpmResumeDelayA		1.3.6.1.4.1.17420.1.1.3.2.1.23
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rpmResumeDelayB		1.3.6.1.4.1.17420.1.1.3.2.1.24
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rpmResumeDelayC		1.3.6.1.4.1.17420.1.1.3.2.1.25
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rpmResumeDelayD		1.3.6.1.4.1.17420.1.1.3.2.1.26
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rpmResumeDelayE		1.3.6.1.4.1.17420.1.1.3.2.1.27
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rpmResumeDelayF		1.3.6.1.4.1.17420.1.1.3.2.1.28
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rpmResumeDelayG		1.3.6.1.4.1.17420.1.1.3.2.1.29
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rpmResumeDelayH		1.3.6.1.4.1.17420.1.1.3.2.1.30
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ats		1.3.6.1.4.1.17420.1.1.5
OBJECT IDENTIFIER

accessEntry		1.3.6.1.4.1.17420.1.1.999.1.1.1
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AccessEntry

rpmSetEntry		1.3.6.1.4.1.17420.1.1.3.3
OBJECT IDENTIFIER

rpmSetID		1.3.6.1.4.1.17420.1.1.3.3.1
The ID number of rpm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..16

rpmOnNumber		1.3.6.1.4.1.17420.1.1.3.3.2
The on number of outlets for the rpm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(0), outletA(1), outletB(2), outletC(3), outletD(4), outletE(5), outletF(6), outletG(7), outletH(8)

rpmOffNumber		1.3.6.1.4.1.17420.1.1.3.3.3
The off number of outlets for the rpm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(0), outletA(1), outletB(2), outletC(3), outletD(4), outletE(5), outletF(6), outletG(7), outletH(8)

rpmAllOnOff		1.3.6.1.4.1.17420.1.1.3.3.4
The all outlets on/off for the rpm. 0 for all outlets off, 1 for all outlets on
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(0), on(1), off(2)

rpmScheduleTable		1.3.6.1.4.1.17420.1.1.3.4
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RpmScheduleEntry

rpmScheduleEntry		1.3.6.1.4.1.17420.1.1.3.4.1
An entry containing information of an rpm.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RpmScheduleEntry

rpmScheduleIndex		1.3.6.1.4.1.17420.1.1.3.4.1.1
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rpmScheduleID		1.3.6.1.4.1.17420.1.1.3.4.1.2
The Schedule shutdown ID number of rpm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..16

rpmOutlet		1.3.6.1.4.1.17420.1.1.3.4.1.3
The specified outlet in rpm.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	outletA(1), outletB(2), outletC(3), outletD(4), outletE(5), outletF(6), outletG(7), outletH(8)

rpmOutletAction		1.3.6.1.4.1.17420.1.1.3.4.1.4
On/Off schedule entry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	on(1), off(2)

rpmPeriod		1.3.6.1.4.1.17420.1.1.3.4.1.5
The period of shutdown.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	once(1), everySunday(2), everyMonday(3), everyTuesday(4), everyWednesday(5), everyThursday(6), everyFriday(7), everySaturday(8), everyDay(9)

rpmDate		1.3.6.1.4.1.17420.1.1.3.4.1.6
The shutdown date.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rpmTime		1.3.6.1.4.1.17420.1.1.3.4.1.7
The shutdown time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rpmStatus		1.3.6.1.4.1.17420.1.1.3.4.1.8
Accept/Clear schedule entry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	clear(0), accept(1)

cpsNumber		1.3.6.1.4.1.17420.1.1.4.1
Indicate how many cps attached to this system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpsTable		1.3.6.1.4.1.17420.1.1.4.2
The number of entries is contained in the cpsNumber OID.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CpsEntry

cpsEntry		1.3.6.1.4.1.17420.1.1.4.2.1
An entry containing information of an cps.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CpsEntry

cpsID		1.3.6.1.4.1.17420.1.1.4.2.1.1
The ID number of cps.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

cpsValue		1.3.6.1.4.1.17420.1.1.4.2.1.2
Indicate the current of cps detect.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cpsThreshold1		1.3.6.1.4.1.17420.1.1.4.2.1.3
Indicate current threshold 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	alarm(0), normal(1)

cpsThreshold2		1.3.6.1.4.1.17420.1.1.4.2.1.4
Indicate current threshold 2.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	alarm(0), normal(1)

cpsSetTable		1.3.6.1.4.1.17420.1.1.4.3
The number of entries is contained in the cpsNumber OID.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CpsSetEntry

cpsSetEntry		1.3.6.1.4.1.17420.1.1.4.3.1
An entry containing information of an cps.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	CpsSetEntry

cpsIDIndex		1.3.6.1.4.1.17420.1.1.4.3.1.1
The ID number of cps.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

cpsSetThreshold1		1.3.6.1.4.1.17420.1.1.4.3.1.2
Set current threshold 1.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..9999

cpsSetThreshold2		1.3.6.1.4.1.17420.1.1.4.3.1.3
Set current threshold 2.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..9999

atsIdentification		4.1
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

atsInputPowerSourceA		4.2
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

atsInputPowerSourceB		4.3
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

atsAutomaticTransferSwitch		4.4
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	none(0), transfer(1)

atsStatus		4.5
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), a(1), b(2)

mgmt		1.3.6.1.4.1.17420.1.1.999
OBJECT IDENTIFIER

snmp		1.3.6.1.4.1.17420.1.1.999.1
OBJECT IDENTIFIER

accessNo		1.3.6.1.4.1.17420.1.1.999.1.1.1.1
Tok_String
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..7

community		1.3.6.1.4.1.17420.1.1.999.1.1.1.2
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

permission		1.3.6.1.4.1.17420.1.1.999.1.1.1.3
Tok_String
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	noAccess(0), read(1), readWrite(2)

rpmOutletOn		100
WARNING: The specified RPM outlet has turned on.
TRAP-TYPE

rpmOutletOff		101
WARNING: The specified RPM outlet has turned off.
TRAP-TYPE

rpmOutletReboot		102
WARNING: The specified RPM outlet has rebooted.
TRAP-TYPE

rpmOutletfault		103
SEVERE: The specified rpm outlet has fault.
TRAP-TYPE

rpmCommunicationLost		104
SEVERE: Communication to the UPS has been lost. Steps to reestablish communication are in progress.
TRAP-TYPE

cpsOutOfThreshold1		105
WARNING: CPS current out of threshold 1.
TRAP-TYPE

cpsOutOfThreshold2		106
CRITICAL: CPS current out of threshold 2.
TRAP-TYPE

cpsCommunicationLost		107
CRITICAL: CPS Communication lost.
TRAP-TYPE