DELLRCSG2-TRAP-MIB
File:
DELLRCSG2-TRAP-MIB.mib (110596 bytes)
Imported modules
Imported symbols
Defined Types
| ImageFileUpgradeResultsEnum |
|
| INTEGER |
imageUpgradeTftpNoSocket(1), imageUpgradeTftpConnectFailure(2), imageUpgradeTftpRequestDenied(3), imageUpgradeTftpBadPacket(4), imageUpgradeTftpOOS(5), imageUpgradeTftpTooBig(6), imageUpgradeTftpTimeout(7), imageUpgradeAlreadyInProgress(8), imageUpgradeCannotStart(9), imageUpgradeMemoryError(10), imageUpgradeTftpProtocolError(11), imageUpgradeBadType(12), imageUpgradeInvalidAppDowngrade(13), imageUpgradeChecksumError(14), imageUpgradeFlashError(15), imageUpgradeInternalError(16), imageUpgradeFileNotFound(17), imageUpgradeBadHeader(18), imageUpgradeIncompatibleHeader(19), imageUpgradeTftpXferFail(20), imageUpgradeTftpSvrNoResponse(21), imageUpgradeNetworkUnreachable(22), imageUpgradeSuccess(9999) |
|
|
| SIPUpgradeResultsEnum |
|
| INTEGER |
sipUpgradeNoFirmwareImage(1), sipUpgradeLostContact(2), sipUpgradeFailedRestart(3), sipUpgradeFailedVerify(4), sipUpgradeSuccess(9999) |
|
|
Defined Values
| dell |
1.3.6.1.4.1.10418 |
| OBJECT IDENTIFIER |
|
|
|
| dellrcsg2 |
1.3.6.1.4.1.10418.18 |
| OBJECT IDENTIFIER |
|
|
|
| dellrcsg2TrapObjectUserName |
1.3.6.1.4.1.10418.18.22.6.1 |
| This object is sent in a trap to identify the name of the user
for which the trap condition occured. If the trap condition occurred
as a result of activity on the local port (OSD), then the value of this
object will be the following string:
Local User
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UTF8String |
Size(3..16) |
|
| dellrcsg2TrapObjectTargetUserName |
1.3.6.1.4.1.10418.18.22.6.2 |
| This object is sent in a trap to identify the name of the target
user for which a trap condition occurred.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UTF8String |
Size(3..16) |
|
| dellrcsg2TrapObjectImageType |
1.3.6.1.4.1.10418.18.22.6.3 |
| This object is sent in a trap to identify the type of software image
for which the trap condition occured.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UTF8String |
Size(0..64) |
|
| dellrcsg2TrapObjectImageNewVersion |
1.3.6.1.4.1.10418.18.22.6.4 |
| This object is sent in a trap to identify the version of the new
software image the RCS is being upgraded to.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UTF8String |
Size(0..32) |
|
| dellrcsg2TrapObjectImageCurrentVersion |
1.3.6.1.4.1.10418.18.22.6.5 |
| This object is sent in a trap to identify the version of the
software image that the RCS is currently running.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UTF8String |
Size(0..32) |
|
| dellrcsg2TrapObjectSessionIdentifier |
1.3.6.1.4.1.10418.18.22.6.6 |
| This object is sent in a trap to identify the session
for which the trap condition occurred. The value will be
the name of a target device if the target device name is known, otherwise
the value will be the connection path to a target device.
If the value is a connection path it will have the
following format:
SIP i:Channel c
Where i is the ID of the SIP, and c is the tiered switch
channel number (0 if there is no switch in the path).
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UTF8String |
Size(0..32) |
|
| dellrcsg2TrapObjectSIPId |
1.3.6.1.4.1.10418.18.22.6.7 |
| This object is sent in a trap to identify the SIP for
which the trap condition occurred.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UTF8String |
Size(0..32) |
|
| dellrcsg2TrapObjectTieredSwitchName |
1.3.6.1.4.1.10418.18.22.6.8 |
| This object is sent in a trap to identify the tiered switch
for which the trap condition occurred.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UTF8String |
Size(0..15) |
|
| dellrcsg2TrapObjectOldTieredSwitchName |
1.3.6.1.4.1.10418.18.22.6.9 |
| This object is sent in a trap to identify the old name of a
tiered switch whose name was changed.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UTF8String |
Size(0..15) |
|
| dellrcsg2TrapObjectTargetDeviceName |
1.3.6.1.4.1.10418.18.22.6.10 |
| This object is sent in a trap to identify the target device for
which the trap condition occurred.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UTF8String |
Size(0..15) |
|
| dellrcsg2TrapObjectOldTargetDeviceName |
1.3.6.1.4.1.10418.18.22.6.11 |
| This object is sent in a trap to identify the old name of
a target device whose name was changed.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UTF8String |
Size(0..15) |
|
| dellrcsg2TrapObjectFileName |
1.3.6.1.4.1.10418.18.22.6.12 |
| This object is sent in a trap to identify the name of a file
for which the trap condition occurred.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| dellrcsg2TrapObjectLockReason |
1.3.6.1.4.1.10418.18.22.6.13 |
| This object is sent in a trap to explain the reason for which a
user account has been locked.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UTF8String |
Size(0..64) |
|
| dellrcsg2TrapObjectUnlockReason |
1.3.6.1.4.1.10418.18.22.6.14 |
| This object is sent in a trap to explain the reason for which a
user account has been unlocked.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UTF8String |
Size(0..64) |
|
| dellrcsg2TrapObjectUserAddress |
1.3.6.1.4.1.10418.18.22.6.15 |
| This object is sent in a trap to identify the user address for
which a trap condition occurred.
For a remote user, the value is the IPv4 or IPv6 IP address.
For a local user, the value is the Local Port of the user.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..40) |
|
| dellrcsg2TrapObjectTypeOfImage |
1.3.6.1.4.1.10418.18.22.6.17 |
| This object is sent in a trap to report the type of software
image for which the trap condition occurred.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
boot(1), app(2) |
|
| dellrcsg2TrapObjectPduDevicePort |
1.3.6.1.4.1.10418.18.22.6.21 |
| This object is sent in a trap to identify the RCS port
that the power device is attached to for which the trap condition
occurred.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..2 |
|
| dellrcsg2TrapObjectPduOutlet |
1.3.6.1.4.1.10418.18.22.6.22 |
| This object is sent in a trap to identify the power device outlet
number for which the trap condition occurred.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
1..16 |
|
| dellrcsg2TrapObjectOldName |
1.3.6.1.4.1.10418.18.22.6.23 |
| This object is sent in a trap to identify the old name of a port
or power device outlet for which the trap condition occurred.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UTF8String |
Size(0..64) |
|
| dellrcsg2TrapObjectItemName |
1.3.6.1.4.1.10418.18.22.6.24 |
| This object is sent in a trap to identify the name of a port
or power device outlet for which the trap condition occurred.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
UTF8String |
Size(0..64) |
|
| dellrcsg2TrapObjectPduDeviceInlet |
1.3.6.1.4.1.10418.18.22.6.25 |
| This object is sent in a trap to identify the inlet of a power device
for which the trap condition occurred.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dellrcsg2TrapObjectPduDeviceNumber |
1.3.6.1.4.1.10418.18.22.6.26 |
| This object is sent in a trap to identify the power device number
that is attached to a RCS port for which the trap
condition occurred.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dellrcsg2TrapObjectPowerSupply |
1.3.6.1.4.1.10418.18.22.6.29 |
| This object is sent in a trap to identify the power supply
for which the trap condition occurred.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..5) |
|
| dellrcsg2TrapObjectAggregatedTargetDeviceStatusChanged |
1.3.6.1.4.1.10418.18.22.6.32 |
| This object is sent in a trap to report server status changes. This
object will report the status change of multiple servers (connection
paths) in an aggregated encoding format as indicated below.
Note that on bootup the RCS will send this object in the
dellrcsg2AggregatedTargetDeviceStatusChangedTrap containing the status of all
connection paths in the RCS. Thereafter the RCS will
send this object in the dellrcsg2AggregatedTargetDeviceStatusChangedTrap containing
only the connection paths whose status has changed.
This object is composed of two sections, which are the header section
and the connection path section. The header section provides version
information and is the first 2 bytes of this object. The connection
path section provides information on each of the connection paths and
is defined in the bytes following the header.
Header Section
--------------
Byte 1 = Start indicator for the header section. The value of the
start indicator is always zero. The value of the start
indicator provides means for management applications to
determine that this object has a header section. All
previous implementations of this object have a non-zero
value in the first byte.
Byte 2 = Version of the aggregate object. The version provides
means to identify the format/structure of this aggregate
object. The format of the aggregate object, as described
here, is identified with a value of 3 for the version.
Connection Path Section
-----------------------
The connection path section is composed of 1 or more connection paths.
The information for each connection path is packed into 10 bytes as
follows:
Byte 1 = The RCS input port number associated with this
connection path. The input port is an ARI port that
interfaces the data traffic coming from or going directly
or indirectly to a target device or a power device.
Note that a power device will report the port number as
100 + the power device port number. For the first power
device port, Byte 1 will report 101 for the power device.
This will avoid potential port conflicts for ARI and
power device ports. In the event that additional power
device ports are available, the number will reflect the
power device port number (i.e. 101, 102, etc.)
Byte 2 = The tiered switch channel number associated with this
connection path. The value will be 0 if a switch channel
is not associated with this connection path.
For power devices, this Byte will represent the power
device number. Byte 3 will contain the outlet number
for this connection path.
Byte 3 ~ 8 = The EID of the SIP associated with this connection path.
Each byte in this field will encode two digits of the
SIP's EID number. For example, if the actual EID number
on the label attached to a SIP is 520255-0346DC then
bytes 3 through 8 would contain the following hex values:
Byte 3 = 0x52
Byte 4 = 0x02
Byte 5 = 0x55
Byte 6 = 0x03
Byte 7 = 0x46
Byte 8 = 0xDC
Note that the dash character is not represented in
the encoded value.
For a power device, the first byte (Byte 3) will
represent the outlet number and the remaining 5 bytes
(Byte 4-8) will be 0.
Byte 9 ~ the left most 4 bits
= The left most four bits of the 9th byte shall be used
to encode / decode the following integer value to
represent the power status of a connected server or the
power status of a power device outlet.
One of the following values can be reported:
1 = Off - The connection path does not have power,
which could be the result of the following
situation: the SIP is unplugged or the
SIP is plugged in but receives no power
from the target device.
2 = On - The connection path has power.
Byte 9 ~ the right most 4 bits
= The right most four bits of the 9th byte shall be used
to encode / decode the following integer value to
represent the viewer session status of a connection path.
For a power device or power device outlet, this value is
always 1 since viewer sessions are not supported.
One of the following values can be reported:
1 = Idle - There is not a viewer session active on
this connection path.
2 = Active - There is an active viewer session on this
connection path.
3 = Blocked - The connection path is blocked meaning a
viewer session cannot be established to
this connection path because of another
viewer session is currently using a
resource required by this connection path
in order to establish a connection path.
A viewer session cannot be blocked by
a virtual media session.
Byte 10 ~ the left most 4 bits
= The left most four bits of the 10th byte shall be used
to encode / decode the following integer value to
represent the virtual media session status of a
connection path. For a power device or power device
outlet, this value is always 1 since virtual media
sessions are not supported.
One of the following values can be reported:
1 = Idle - There is not a virtual media session
active on this connection path.
2 = Active - There is a virtual media session on this
connection path.
3 = Blocked - The connection path is blocked meaning a
virtual media session cannot be
established to this connection path
because of another virtual media session
is currently using a resource required by
this connection path in order to establish
a connection path. A virtual media session
cannot be blocked by a viewer session.
Byte 10 ~ the right most 4 bits
= The right most four bits of the 10th byte shall be used
for future use and they will have a value of 0.
Every connection path will be packed into this object in 10 byte
increments one after the other. The connection paths do not have to be
packed in any specific order. Note that the size of this object could
conceivably be as large as shown in the following calculation with
these assumptions.
- 24 channel switch connected to each port of the RCS
- 4 power devices connected to RCS, each having 32 outlets
(((16 ports X 24 channels) + (4 power devices X 32 power device outlets))
X 10 bytes) + (2 byte Header) = 5122.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(12..5122) |
|
| dellrcsg2TrapObjectPduDeviceCircuit |
1.3.6.1.4.1.10418.18.22.6.33 |
| This object is sent in a trap to identify the circuit of a power
device for which the trap condition occurred.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
|
|
| dellrcsg2TrapObjectSessionType |
1.3.6.1.4.1.10418.18.22.6.34 |
| This object is sent in a trap to identify the session type for
which a trap condition occurred.
The value is KVM for a KVM session,
or Serial for a Serial session.
|
| Status: mandatory |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..16) |
|
| dellrcsg2RebootStartedTrap |
1 |
| The RCS is in the process of rebooting.
The name of the user who initiated the reboot
is contained in dellrcsg2TrapObjectUserName.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2UserLoginTrap |
2 |
| A user logged into the RCS.
The name of the user who logged in
is contained in dellrcsg2TrapObjectUserName.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2UserLogoutTrap |
3 |
| A user logged out of the RCS.
The name of the user who logged out is contained
in dellrcsg2TrapObjectUserName.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2TargetSessionStartedTrap |
4 |
| A target session has started. This may be a serial or KVM
session, depending on the type of target.
The name of the user who is connected to the session
is contained in dellrcsg2TrapObjectUserName.
The session identifier is contained in
dellrcsg2TrapObjectSessionIdentifier.
The user address is contained in
dellrcsg2TrapObjectUserAddress.
The session type is contained in
dellrcsg2TrapObjectSessionType.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2TargetSessionStoppedTrap |
5 |
| A target session has stoppped. This may be a serial or KVM
session, depending on the type of target.
The name of the user who was connected to the session
is contained in dellrcsg2TrapObjectUserName.
The session identifier is contained in
dellrcsg2TrapObjectSessionIdentifier.
The user address is contained in
dellrcsg2TrapObjectUserAddress.
The session type is contained in
dellrcsg2TrapObjectSessionType.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2TargetSessionTerminatedTrap |
6 |
| A target session has been terminated by another
user. This may be a serial or KVM session, depending on the
type of target.
The name of the user who terminated the session is
contained in dellrcsg2TrapObjectUserName if available. An empty
string is reported if a user name is not available.
The name of the user who was terminated from the session
is contained in dellrcsg2TrapObjectTargetUserName.
The session identifier is contained in
dellrcsg2TrapObjectSessionIdentifier.
The user address is contained in
dellrcsg2TrapObjectUserAddress.
The session type is contained in
dellrcsg2TrapObjectSessionType.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2LocalPortSessionStartedTrap |
7 |
| A local port target session has started.
The session identifier is contained in
dellrcsg2TrapObjectSessionIdentifier.
This Trap is deprecated and is no longer used.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2LocalPortSessionStoppedTrap |
8 |
| A local port target session has stopped.
The session identifier is contained in
dellrcsg2TrapObjectSessionIdentifier.
This Trap is deprecated and is no longer used.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2LocalPortSessionTerminatedTrap |
9 |
| A local port target session has been terminated by another
user.
The name of the user who terminated the session is
contained in dellrcsg2TrapObjectUserName.
The session identifier is contained in
dellrcsg2TrapObjectSessionIdentifier.
This Trap is deprecated and is no longer used.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2ImageFileUpgradeStarted |
10 |
| The RCS has started an image upgrade.
The name of the user who originally started the image upgrade is
contained in dellrcsg2TrapObjectUserName if available. An empty
string is reported if a user name is not available.
The URL of the file that was loaded is contained in
dellrcsg2TrapObjectFileName.
The version of the image that the RCS is upgrading to is
contained in dellrcsg2TrapObjectImageNewVersion.
The version of the image that the RCS is currently running
is contained in dellrcsg2TrapObjectImageCurrentVersion.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2UserAddedTrap |
12 |
| A new user has been added to the local user database.
The name of the user who added the new user is contained
in dellrcsg2TrapObjectUserName.
The name of the new user is contained in
dellrcsg2TrapObjectTargetUserName.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2UserDeletedTrap |
13 |
| A user has been deleted from the local user database.
The name of the user who deleted the user is contained
in dellrcsg2TrapObjectUserName.
The name of the user who was deleted is contained
in dellrcsg2TrapObjectTargetUserName.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2UserModifiedTrap |
14 |
| A user was modified.
The name of the user who modified the user is contained
in dellrcsg2TrapObjectUserName.
The name of the user who was modified is contained
in dellrcsg2TrapObjectTargetUserName.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2UserLockedTrap |
15 |
| A user account has been locked.
The name of the user who was locked is contained
in dellrcsg2TrapObjectTargetUserName.
The reason for which the user account has been locked is contained
in dellrcsg2TrapObjectLockReason.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2UserUnlockedTrap |
16 |
| A user account has been unlocked.
The name of the user who unlocked the user is contained
in dellrcsg2TrapObjectUserName. When the user account is unlocked
by a RCS reboot or by the expiration of the lockout period
(as specified in the dellrcsg2TrapObjectUnlockReason object), the
name of the user will be blank.
The name of the user who was unlocked is contained
in dellrcsg2TrapObjectTargetUserName.
The reason for which the user account has been unlocked is contained
in dellrcsg2TrapObjectUnlockReason.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2SIPAddedTrap |
18 |
| A SIP was added. The ID of the SIP which was added is
contained in dellrcsg2TrapObjectSIPId.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2SIPRemovedTrap |
19 |
| A SIP was removed. The ID of the SIP which was removed is
contained in dellrcsg2TrapObjectSIPId.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2SIPMovedTrap |
20 |
| A SIP was moved.
The ID of the SIP which was moved is contained in dellrcsg2TrapObjectSIPId.
The name of the target device attached to the SIP is contained in
dellrcsg2TrapObjectTargetDeviceName.
The input port number on the RCS that the SIP is now
connected to is contained in dellrcsg2TrapObjectInputPort.
The input port number on the RCS that the SIP
was previously connected to is contained in
dellrcsg2TrapObjectOldInputPort.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2TargetDeviceNameChangedTrap |
21 |
| The name of a server has changed.
The previous name of the server is contained in
dellrcsg2TrapObjectOldTargetDeviceName.
The new name of the server is contained in
dellrcsg2TrapObjectTargetDeviceName.
The ID of the SIP the server is attached to is
contained in dellrcsg2TrapObjectSIPId.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2TieredSwitchAddedTrap |
22 |
| A tiered switch was added. The name of the switch
which was added is contained in dellrcsg2TrapObjectTieredSwitchName.
The ID of the SIP the switch was added to is contained
in dellrcsg2TrapObjectSIPId.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2TieredSwitchRemovedTrap |
23 |
| A tiered switch was removed. The name of the switch
which was removed is contained in
dellrcsg2TrapObjectTieredSwitchName.
The ID of the SIP the switch was attached to is contained
in dellrcsg2TrapObjectSIPId.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2TieredSwitchNameChangedTrap |
24 |
| The name of a tiered switch has changed.
The previous name of the tiered switch is contained in
dellrcsg2TrapObjectOldTieredSwitchName.
The new name of the tiered switch is contained in
dellrcsg2TrapObjectTieredSwitchName.
The ID of the SIP the switch is attached to is contained
in dellrcsg2TrapObjectSIPId.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2ConfigurationFileLoadedTrap |
25 |
| The RCS has loaded a configuration file.
The name of the user who commanded the RCS to
load the configuration file is contained in
dellrcsg2TrapObjectUserName.
The URL of the file that was loaded is contained in
dellrcsg2TrapObjectFileName.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2UserDatabaseFileLoadedTrap |
26 |
| The RCS has loaded a user database file.
The name of the user who commanded the RCS to
load the user database file is contained in
dellrcsg2TrapObjectUserName.
The URL of the file that was loaded is contained in
dellrcsg2TrapObjectFileName.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2CaCertificateLoaded |
27 |
| A user has loaded a new CA Certificate in the RCS.
The name of the user who loaded the certificate is
contained in dellrcsg2TrapObjectUserName.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2SIPImageUpgradeStarted |
28 |
| A software image upgrade has started on a SIP.
The name of the user who originally started the image upgrade is
contained in dellrcsg2TrapObjectUserName if available. An empty
string is reported if a user name is not available.
The type of software image being upgraded is contained in
dellrcsg2TrapObjectSIPTypeOfImage.
The software image version the SIP is upgrading to is
contained in dellrcsg2TrapObjectImageNewVersion.
The software image version the SIP is currently running
is contained in dellrcsg2TrapObjectImageCurrentVersion.
The name of the server connected to the SIP being upgraded is
contained in dellrcsg2TrapObjectTargetDeviceName.
The ID of the SIP being upgraded is contained in
dellrcsg2TrapObjectSIPId
|
| TRAP-TYPE |
|
|
|
| dellrcsg2SIPImageUpgradeResultTrap |
29 |
| The result of a SIP software image upgrade.
The image upgrade result is contained in
dellrcsg2TrapObjectSIPImageUpgradeResult.
The name of the user who originally started the image upgrade is
contained in dellrcsg2TrapObjectUserName if available. An empty
string is reported if a user name is not available.
The type of software image the upgrade result is for is contained in
dellrcsg2TrapObjectTypeOfImage.
The software image version the SIP attempted to upgrade to
is contained in dellrcsg2TrapObjectImageNewVersion.
The software image version the SIP is running is contained
in dellrcsg2TrapObjectImageCurrentVersion. If the software image
upgrade was successful then this version will match the version
reported in dellrcsg2TrapObjectImageNewVersion.
The name of the server connected to the SIP is
contained in dellrcsg2TrapObjectTargetDeviceName.
The ID of the SIP the result is for is contained in
dellrcsg2TrapObjectSIPId.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2SIPRestartedTrap |
30 |
| A SIP has restarted. A SIP will restart after
a SIP image upgrade completes.
The name of the server connected to the SIP is
contained in dellrcsg2TrapObjectTargetDeviceName.
The ID of the SIP that restarted is for is contained in
dellrcsg2TrapObjectSIPId.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2ScreenResolutionChangedTrap |
45 |
| The screen resolution of a server was changed.
The name of the user who changed the screen resolution is contained
in dellrcsg2TrapObjectUserName if available. An empty string is
reported if a user name is not available. A user name will not be
available if the target session controlling the server was started
from the local interface and local authentication is disabled.
The name of the server the screen resolution was changed on is
contained in dellrcsg2TrapObjectTargetDeviceName.
The previous screen resolution is contained in
dellrcsg2TrapObjectPreviousScreenResolution.
The new screen resolution is contained in
dellrcsg2TrapObjectCurrentScreenResolution.
The session identifier is contained in
dellrcsg2TrapObjectSessionIdentifier.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2AggregatedTargetDeviceStatusChangedTrap |
46 |
| The status of one or more servers (connection paths) has
changed.
A list of connection paths whose status has changed is contained
in dellrcsg2TrapObjectAggregatedTargetDeviceStatusChanged.
This trap is always sent by the RCS on bootup to report the
current status of all connection paths. Thereafter the trap is sent
when there is a change in connection path status and will include only
those paths whose status has changed.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2FactoryDefaultsSetTrap |
47 |
| The RCS has been commanded to set itself to factory defaults.
The RCS sends this trap after being commanded to set itself
to factory defaults but prior to actually reverting to factory
defaults.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PowerSupplyFailureTrap |
48 |
| A power supply failure has ocurred, for RCSes with dual power supplies.
The power supply which has failed is indicated in dellrcsg2TrapObjectPowerSupply.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PowerSupplyRestoredTrap |
49 |
| A power supply has been restored, for RCSes with dual power supplies.
The power supply which has been restored is indicated in dellrcsg2TrapObjectPowerSupply.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduDeviceOnlineTrap |
50 |
| A power device attached to the RCS is detected to be online.
This trap is sent upon initialization of the power device if it is
online and responding. Subsequent traps are sent if the power device
transitions from offline to online.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduDeviceOfflineTrap |
51 |
| A power device attached to the RCS is detected to be offline.
This trap is sent upon initialization of the power device if it is not
responding. Subsequent traps are sent if the power device transitions
from online to offline.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduOutletOnCommandTrap |
52 |
| A outlet on a power device has been issued the on command.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that was issued the on command is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduOutletOffCommandTrap |
53 |
| A outlet on a power device has been issued the off command.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that was issued the off command is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduOutletRebootCommandTrap |
54 |
| A outlet on a power device has been issued the reboot command.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that was issued the reboot command is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduOutletOnSenseFailTrap |
55 |
| A power device attached to the RCS has detected an on sense
failure for a outlet.
An on sense failure occurs when a outlet should be in the on state
but is actually in the off state.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that has the failure is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduOutletOffSenseFailTrap |
56 |
| A power device attached to the RCS has detected an off sense
failure for a outlet.
An off sense failure occurs when a outlet should be in the off state
but is actually in the on state.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that has the failure is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduStatusOutletOnTrap |
57 |
| A power device outlet has changed to the on state.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that has changed to the on state is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduStatusOutletOffTrap |
58 |
| A power device outlet has changed to the off state.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that has changed to the off state is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduPortNameChangedTrap |
59 |
| The name of a power device port has changed.
The previous name of the power device port is contained in
dellrcsg2TrapObjectOldName.
The new name of the power device port is contained in
dellrcsg2TrapObjectItemName.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduOutletNameChangedTrap |
60 |
| The name of a power device outlet has changed.
The previous name of the power device outlet is contained in
dellrcsg2TrapObjectOldName.
The new name of the power device outlet is contained in
dellrcsg2TrapObjectItemName.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
The outlet number of the power device is contained in
dellrcsg2TrapObjectPduOutlet.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduInletTotalLoadHighTrap |
61 |
| A power device attached to the RCS has exceeded the maximum
threshold for total load of an inlet.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
The inlet of the power device is contained in
dellrcsg2TrapObjectPduDeviceInlet.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduInletTotalLoadLowTrap |
62 |
| A power device attached to the RCS has gone beneath the minimum
threshold for total load.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
The inlet of the power device is contained in
dellrcsg2TrapObjectPduDeviceInlet.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduDeviceNameChangedTrap |
63 |
| The name of a power device has changed.
The previous name of the power device is contained in
dellrcsg2TrapObjectOldName.
The new name of the power device is contained in
dellrcsg2TrapObjectItemName.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduInletNameChangedTrap |
64 |
| The name of a power device inlet has changed.
The previous name of the power device inlet is contained in
dellrcsg2TrapObjectOldName.
The new name of the power device inlet is contained in
dellrcsg2TrapObjectItemName.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
The inlet of the power device is contained in
dellrcsg2TrapObjectPduDeviceInlet.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduOutletLockCommandTrap |
65 |
| A outlet on a power device has been issued the lock command.
The name of the user who originally started the image upgrade is
contained in dellrcsg2TrapObjectUserName if available. An empty
string is reported if a user name is not available.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that was issued the lock command is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduOutletUnlockCommandTrap |
66 |
| A outlet on a power device has been issued the unlock command.
The name of the user who originally started the image upgrade is
contained in dellrcsg2TrapObjectUserName if available. An empty
string is reported if a user name is not available.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that was issued the unlock command is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduStatusOutletLockTrap |
67 |
| A power device outlet has changed to the lock state.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that has changed to the lock state is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduStatusOutletUnlockTrap |
68 |
| A power device outlet has changed to the unlock state.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The outlet number that has changed to the unlock state is contained
in dellrcsg2TrapObjectPduOutlet.
The name of the server connected to the power device outlet is
contained in dellrcsg2TrapObjectTargetDeviceName.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduImageFileUpgradeStartedTrap |
69 |
| The RCS has started an upgrade of the power device software image file.
The name of the user who initiated the image upgrade is contained
in dellrcsg2TrapObjectUserName if available.
The type of software image being upgraded is contained in
dellrcsg2TrapObjectTypeOfImage.
The software image version the RCS is upgrading the power device to is
contained in dellrcsg2TrapObjectImageNewVersion.
The software image version the power device is currently running
is contained in dellrcsg2TrapObjectImageCurrentVersion.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduImageFileUpgradeResultTrap |
70 |
| The result of a software image file upgrade for a power device.
The result is contained in dellrcsg2TrapObjectImageFileUpgradeResult.
The name of the user who originally started the image upgrade is
contained in dellrcsg2TrapObjectUserName if available. An empty
string is reported if a user name is not available.
The type of software image the upgrade result is for is contained in
dellrcsg2TrapObjectTypeOfImage.
The software image version the RCS attempted to upgrade to
is contained in dellrcsg2TrapObjectImageNewVersion.
The software image version the RCS is running is contained
in dellrcsg2TrapObjectImageCurrentVersion. If the software image
upgrade was successful then this version will match the version
reported in dellrcsg2TrapObjectImageNewVersion.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduCircuitNameChangedTrap |
71 |
| The name of a power device circuit has changed.
The previous name of the power device circuit is contained in
dellrcsg2TrapObjectOldName.
The new name of the power device circuit is contained in
dellrcsg2TrapObjectItemName.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
The circuit of the power device is contained in
dellrcsg2TrapObjectPduDeviceCircuit.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduDeviceTotalLoadHighTrap |
72 |
| A power device attached to the RCS has exceeded the maximum
threshold for total load of the device.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduCircuitTotalLoadHighTrap |
73 |
| A power device attached to the RCS has exceeded the maximum
threshold for total load of a circuit.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
The circuit of the power device is contained in
dellrcsg2TrapObjectPduDeviceCircuit.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2PduOutletTotalLoadHighTrap |
74 |
| A power device attached to the RCS has exceeded the maximum
threshold for total load of an Outlet.
The port number on the RCS that the power device is attached to
is contained in dellrcsg2TrapObjectPduDevicePort.
The number of the power device that is connected to a port of the
RCS is contained in dellrcsg2TrapObjectPduDeviceNumber.
The circuit of the power device is contained in
dellrcsg2TrapObjectPduOutlet.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2TemperatureRangeTrap |
76 |
| Unit temperature outside operating range has been reached.
This trap is generated for a high temperature or low temperature
which is outside operating range.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2SmartCardInsertedTrap |
77 |
| A smart card has been inserted.
The name of the user who is connected to the session
is contained in dellrcsg2TrapObjectUserName.
The session identifier is contained in
dellrcsg2TrapObjectSessionIdentifier.
The user address is contained in
dellrcsg2TrapObjectUserAddress.
|
| TRAP-TYPE |
|
|
|
| dellrcsg2SmartCardRemovedTrap |
78 |
| A smart card has been removed.
The name of the user who is connected to the session
is contained in dellrcsg2TrapObjectUserName.
The session identifier is contained in
dellrcsg2TrapObjectSessionIdentifier.
The user address is contained in
dellrcsg2TrapObjectUserAddress.
|
| TRAP-TYPE |
|
|
|