DELL-NETWORKING-BGP4-V2-MIB

File: DELL-NETWORKING-BGP4-V2-MIB.mib (120497 bytes)

Imported modules

SNMPv2-SMI INET-ADDRESS-MIB SNMPv2-TC
SNMPv2-CONF SNMP-FRAMEWORK-MIB DELL-NETWORKING-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Counter32 Gauge32 mib-2
Unsigned32 Integer32 TimeTicks
InetAddressType InetAddress InetPortNumber
InetAutonomousSystemNumber InetAddressPrefixLength TEXTUAL-CONVENTION
TruthValue RowPointer StorageType
RowStatus MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP SnmpAdminString dellNetExperiment

Defined Types

DellNetBgpM2Identifier  
The representation of a BGP Identifier. The BGP Identifier should be represented in the OCTET STRING as with the first OCTET of the string containing the first OCTET of the BGP Identifier received or sent in the OPEN packet and so on. Even though the BGP Identifier is trending away from an IP address it is still displayed as if it was one, even when it would be an illegal IP address.
TEXTUAL-CONVENTION    
  OCTET STRING Size(4)  

DellNetBgpM2Afi  
The representation of a BGP AFI
TEXTUAL-CONVENTION    
  Unsigned32 0..65535  

DellNetBgpM2Safi  
The representation of a BGP SAFI
TEXTUAL-CONVENTION    
  Unsigned32 0..255  

DellNetBgpM2Community  
The representation of a BGP Community.
TEXTUAL-CONVENTION    
  OCTET STRING Size(4)  

DellNetBgpM2ExtendedCommunity  
The representation of a BGP Extended Community.
TEXTUAL-CONVENTION    
  OCTET STRING Size(8)  

DellNetBgpM2VersionEntry  
SEQUENCE    
  dellNetBgpM2VersionIndex Unsigned32
  dellNetBgpM2VersionSupported TruthValue

DellNetBgpM2SupportedCapabilityEntry  
SEQUENCE    
  dellNetBgpM2SupportedCapabilityCode Unsigned32
  dellNetBgpM2SupportedCapability TruthValue

DellNetBgpM2PeerEntry  
SEQUENCE    
  dellNetBgpM2PeerInstance Unsigned32
  dellNetBgpM2PeerIdentifier DellNetBgpM2Identifier
  dellNetBgpM2PeerState INTEGER
  dellNetBgpM2PeerStatus INTEGER
  dellNetBgpM2PeerConfiguredVersion Unsigned32
  dellNetBgpM2PeerNegotiatedVersion Unsigned32
  dellNetBgpM2PeerLocalAddrType InetAddressType
  dellNetBgpM2PeerLocalAddr InetAddress
  dellNetBgpM2PeerLocalPort InetPortNumber
  dellNetBgpM2PeerLocalAs InetAutonomousSystemNumber
  dellNetBgpM2PeerRemoteAddrType InetAddressType
  dellNetBgpM2PeerRemoteAddr InetAddress
  dellNetBgpM2PeerRemotePort InetPortNumber
  dellNetBgpM2PeerRemoteAs InetAutonomousSystemNumber
  dellNetBgpM2PeerIndex Unsigned32

DellNetBgpM2PeerErrorsEntry  
SEQUENCE    
  dellNetBgpM2PeerLastErrorReceived OCTET STRING
  dellNetBgpM2PeerLastErrorSent OCTET STRING
  dellNetBgpM2PeerLastErrorReceivedTime TimeTicks
  dellNetBgpM2PeerLastErrorSentTime TimeTicks
  dellNetBgpM2PeerLastErrorReceivedText SnmpAdminString
  dellNetBgpM2PeerLastErrorSentText SnmpAdminString
  dellNetBgpM2PeerLastErrorReceivedData OCTET STRING
  dellNetBgpM2PeerLastErrorSentData OCTET STRING

DellNetBgpM2PeerEventTimesEntry  
SEQUENCE    
  dellNetBgpM2PeerFsmEstablishedTime Gauge32
  dellNetBgpM2PeerInUpdatesElapsedTime Gauge32

DellNetBgpM2PeerConfiguredTimersEntry  
SEQUENCE    
  dellNetBgpM2PeerConnectRetryInterval Unsigned32
  dellNetBgpM2PeerHoldTimeConfigured Unsigned32
  dellNetBgpM2PeerKeepAliveConfigured Unsigned32
  dellNetBgpM2PeerMinASOrigInterval Unsigned32
  dellNetBgpM2PeerMinRouteAdverInterval Unsigned32

DellNetBgpM2PeerNegotiatedTimersEntry  
SEQUENCE    
  dellNetBgpM2PeerHoldTime Unsigned32
  dellNetBgpM2PeerKeepAlive Unsigned32

DellNetBgpM2PeerCapsAnnouncedEntry  
SEQUENCE    
  dellNetBgpM2PeerCapAnnouncedCode Unsigned32
  dellNetBgpM2PeerCapAnnouncedIndex Unsigned32
  dellNetBgpM2PeerCapAnnouncedValue OCTET STRING

DellNetBgpM24PeerCapsReceivedEntry  
SEQUENCE    
  dellNetBgpM2PeerCapReceivedCode Unsigned32
  dellNetBgpM2PeerCapReceivedIndex Unsigned32
  dellNetBgpM2PeerCapReceivedValue OCTET STRING

DellNetBgpM2PeerCountersEntry  
SEQUENCE    
  dellNetBgpM2PeerInUpdates Counter32
  dellNetBgpM2PeerOutUpdates Counter32
  dellNetBgpM2PeerInTotalMessages Counter32
  dellNetBgpM2PeerOutTotalMessages Counter32
  dellNetBgpM2PeerFsmEstablishedTrans Counter32
  dellNetBgpM2PeerInKeepalives Counter32
  dellNetBgpM2PeerOutKeepalives Counter32
  dellNetBgpM2PeerInOpen Counter32
  dellNetBgpM2PeerOutOpen Counter32
  dellNetBgpM2PeerInRteRefresh Counter32
  dellNetBgpM2PeerOutRteRefresh Counter32

DellNetBgpM2PrefixCountersEntry  
SEQUENCE    
  dellNetBgpM2PrefixCountersAfi DellNetBgpM2Afi
  dellNetBgpM2PrefixCountersSafi DellNetBgpM2Safi
  dellNetBgpM2PrefixInPrefixes Gauge32
  dellNetBgpM2PrefixInPrefixesAccepted Gauge32
  dellNetBgpM2PrefixInPrefixesRejected Gauge32
  dellNetBgpM2PrefixOutPrefixes Gauge32
  dellNetBgpM2PrefixWdrawnByPeer Gauge32
  dellNetBgpM2PrefixWdrawnFromPeer Gauge32

DellNetBgpM2PeerReflectorClientEntry  
SEQUENCE    
  dellNetBgpM2PeerReflectorClient INTEGER

DellNetBgpM2PeerConfedMemberEntry  
SEQUENCE    
  dellNetBgpM2PeerConfedMember TruthValue

DellNetBgpM2CfgPeerAdminStatusEntry  
SEQUENCE    
  dellNetBgpM2CfgPeerAdminStatus INTEGER

DellNetBgpM2CfgPeerEntry  
SEQUENCE    
  dellNetBgpM2CfgPeerConfiguredVersion Unsigned32
  dellNetBgpM2CfgAllowVersionNegotiation TruthValue
  dellNetBgpM2CfgPeerLocalAddrType InetAddressType
  dellNetBgpM2CfgPeerLocalAddr InetAddress
  dellNetBgpM2CfgPeerLocalAs InetAutonomousSystemNumber
  dellNetBgpM2CfgPeerRemoteAddrType InetAddressType
  dellNetBgpM2CfgPeerRemoteAddr InetAddress
  dellNetBgpM2CfgPeerRemoteAs InetAutonomousSystemNumber
  dellNetBgpM2CfgPeerEntryStorageType StorageType
  dellNetBgpM2CfgPeerError INTEGER
  dellNetBgpM2CfgPeerBgpPeerEntry RowPointer
  dellNetBgpM2CfgPeerRowEntryStatus RowStatus
  dellNetBgpM2CfgPeerIndex Integer32
  dellNetBgpM2CfgPeerStatus INTEGER

DellNetBgpM2CfgPeerTimersEntry  
SEQUENCE    
  dellNetBgpM2CfgPeerConnectRetryInterval Unsigned32
  dellNetBgpM2CfgPeerHoldTimeConfigured Unsigned32
  dellNetBgpM2CfgPeerKeepAliveConfigured Unsigned32
  dellNetBgpM2CfgPeerMinASOrigInterval Unsigned32
  dellNetBgpM2CfgPeerMinRouteAdverInter Unsigned32

DellNetBgpM2CfgPeerReflectorClientEntry  
SEQUENCE    
  dellNetBgpM2CfgPeerReflectorClient INTEGER

DellNetBgpM2CfgPeerConfedMemberEntry  
SEQUENCE    
  dellNetBgpM2CfgPeerConfedMember TruthValue

DellNetBgpM2NlriEntry  
SEQUENCE    
  dellNetBgpM2NlriIndex Unsigned32
  dellNetBgpM2NlriAfi DellNetBgpM2Afi
  dellNetBgpM2NlriSafi DellNetBgpM2Safi
  dellNetBgpM2NlriPrefixType InetAddressType
  dellNetBgpM2NlriPrefix InetAddress
  dellNetBgpM2NlriPrefixLen InetAddressPrefixLength
  dellNetBgpM2NlriBest TruthValue
  dellNetBgpM2NlriCalcLocalPref Unsigned32
  dellNetBgpM2PathAttrIndex Unsigned32
  dellNetBgpM2NlriOpaqueType INTEGER
  dellNetBgpM2NlriOpaquePointer RowPointer

DellNetBgpM2AdjRibsOutEntry  
SEQUENCE    
  dellNetBgpM2AdjRibsOutIndex Unsigned32
  dellNetBgpM2AdjRibsOutRoute RowPointer

DellNetBgpM2PathAttrEntry  
SEQUENCE    
  dellNetBgpM2PathAttrOrigin INTEGER
  dellNetBgpM2PathAttrNextHopAddrType InetAddressType
  dellNetBgpM2PathAttrNextHop InetAddress
  dellNetBgpM2PathAttrMedPresent TruthValue
  dellNetBgpM2PathAttrMed Unsigned32
  dellNetBgpM2PathAttrLocalPrefPresent TruthValue
  dellNetBgpM2PathAttrLocalPref Unsigned32
  dellNetBgpM2PathAttrAtomicAggregate INTEGER
  dellNetBgpM2PathAttrAggregatorAS InetAutonomousSystemNumber
  dellNetBgpM2PathAttrAggregatorAddr DellNetBgpM2Identifier
  dellNetBgpM2AsPathCalcLength Unsigned32
  dellNetBgpM2AsPathString SnmpAdminString
  dellNetBgpM2AsPathIndex Unsigned32

DellNetBgpM2AsPath4byteEntry  
SEQUENCE    
  dellNetBgpM2AsPath4bytePathPresent TruthValue
  dellNetBgpM2AsPath4byteAggregatorAS InetAutonomousSystemNumber
  dellNetBgpM2AsPath4byteCalcLength Unsigned32
  dellNetBgpM2AsPath4byteString SnmpAdminString
  dellNetBgpM2AsPath4byteIndex Unsigned32

DellNetBgpM2AsPathEntry  
SEQUENCE    
  dellNetBgpM2AsPathSegmentIndex Unsigned32
  dellNetBgpM2AsPathElementIndex Unsigned32
  dellNetBgpM2AsPathType INTEGER
  dellNetBgpM2AsPathElementValue InetAutonomousSystemNumber

DellNetBgpM2PathAttrUnknownEntry  
SEQUENCE    
  dellNetBgpM2PathAttrUnknownIndex Unsigned32
  dellNetBgpM2PathAttrUnknownType Unsigned32
  dellNetBgpM2PathAttrUnknownValue OCTET STRING

DellNetBgpM2PathAttrOriginatorIdEntry  
SEQUENCE    
  dellNetBgpM2PathAttrOriginatorId DellNetBgpM2Identifier

DellNetBgpM2PathAttrClusterEntry  
SEQUENCE    
  dellNetBgpM2PathAttrClusterIndex Unsigned32
  dellNetBgpM2PathAttrClusterValue DellNetBgpM2Identifier

DellNetBgpM2PathAttrCommEntry  
SEQUENCE    
  dellNetBgpM2PathAttrCommIndex Unsigned32
  dellNetBgpM2PathAttrCommValue DellNetBgpM2Community

DellNetBgpM2PathAttrExtCommEntry  
SEQUENCE    
  dellNetBgpM2PathAttrExtCommIndex Unsigned32
  dellNetBgpM2PathAttrExtCommValue DellNetBgpM2ExtendedCommunity

DellNetBgpM2LinkLocalNextHopEntry  
SEQUENCE    
  dellNetBgpM2LinkLocalNextHopPresent TruthValue
  dellNetBgpM2LinkLocalNextHop InetAddress

Defined Values

dellNetBgpM2 1.3.6.1.4.1.6027.20.1
This MIB module defines management objects for the Border Gateway Protocol, Version 4.
MODULE-IDENTITY    

dellNetBgpM2BaseScalars 1.3.6.1.4.1.6027.20.1.1
OBJECT IDENTIFIER    

dellNetBgpM2BaseNotifications 1.3.6.1.4.1.6027.20.1.1.0
OBJECT IDENTIFIER    

dellNetBgpM2Established 1.3.6.1.4.1.6027.20.1.1.0.1
The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.
Status: current Access: read-write
NOTIFICATION-TYPE    

dellNetBgpM2BackwardTransition 1.3.6.1.4.1.6027.20.1.1.0.2
The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.
Status: current Access: read-write
NOTIFICATION-TYPE    

dellNetBgpM2Version 1.3.6.1.4.1.6027.20.1.1.1
OBJECT IDENTIFIER    

dellNetBgpM2VersionTable 1.3.6.1.4.1.6027.20.1.1.1.1
Table of supported BGP versions.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2VersionEntry

dellNetBgpM2VersionEntry 1.3.6.1.4.1.6027.20.1.1.1.1.1
Entry containing data on a given supported version of the Border Gateway Protocol and the level of support provided. It is expected that any agent implementation supporting this MIB module will report support for Version 4 of the Border Gateway Protocol at the very minimum.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2VersionEntry  

dellNetBgpM2VersionIndex 1.3.6.1.4.1.6027.20.1.1.1.1.1.1
The version number of the BGP Protocol.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

dellNetBgpM2VersionSupported 1.3.6.1.4.1.6027.20.1.1.1.1.1.2
This value is TRUE if this version of the BGP protocol identified in 'dellNetBgpM2VersionIndex' is supported. The absence of a row for a particular dellNetBgpM2VersionIndex indicates that that dellNetBgpM2VersionIndex protocol version number is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

dellNetBgpM2SupportedCapabilities 1.3.6.1.4.1.6027.20.1.1.2
OBJECT IDENTIFIER    

dellNetBgpM2CapabilitySupportAvailable 1.3.6.1.4.1.6027.20.1.1.2.1
This value is TRUE if capability support is available and is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

dellNetBgpM2SupportedCapabilitiesTable 1.3.6.1.4.1.6027.20.1.1.2.2
Table of supported BGP-4 capabilities.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2SupportedCapabilityEntry

dellNetBgpM2SupportedCapabilitiesEntry 1.3.6.1.4.1.6027.20.1.1.2.2.1
Information about supported capabilities indexed by capability number.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2SupportedCapabilityEntry  

dellNetBgpM2SupportedCapabilityCode 1.3.6.1.4.1.6027.20.1.1.2.2.1.1
Index of supported capability. The index directly corresponds with the BGP-4 Capability Advertisement Capability Code.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

dellNetBgpM2SupportedCapability 1.3.6.1.4.1.6027.20.1.1.2.2.1.2
This value is True if this capability is supported, False otherwise.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

dellNetBgpM2AsSize 1.3.6.1.4.1.6027.20.1.1.4
The size of the AS value in this implementation. The semantics of this are determined as per the as-4bytes draft.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER twoOctet(1), fourOctet(2)  

dellNetBgpM2LocalAs 1.3.6.1.4.1.6027.20.1.1.5
The local autonomous system number. If the dellNetBgpM2AsSize is twoOctet, then the range is constrained to be 0-65535.
Status: current Access: read-only
OBJECT-TYPE    
  InetAutonomousSystemNumber  

dellNetBgpM2LocalIdentifier 1.3.6.1.4.1.6027.20.1.1.6
The BGP Identifier of local system. Current practice is trending away from this value being treated as an IP address and more as a generic identifier.
Status: current Access: read-only
OBJECT-TYPE    
  DellNetBgpM2Identifier  

dellNetBgpM2BaseScalarExtensions 1.3.6.1.4.1.6027.20.1.1.7
OBJECT IDENTIFIER    

dellNetBgpM2BaseScalarNonCapExts 1.3.6.1.4.1.6027.20.1.1.7.1
OBJECT IDENTIFIER    

dellNetBgpM2BaseScalarCapExts 1.3.6.1.4.1.6027.20.1.1.7.2
OBJECT IDENTIFIER    

dellNetBgpM2BaseScalarRouteReflectExts 1.3.6.1.4.1.6027.20.1.1.7.1.2796
OBJECT IDENTIFIER    

dellNetBgpM2RouteReflector 1.3.6.1.4.1.6027.20.1.1.7.1.2796.1
This value is TRUE if this implementation supports the BGP Route Reflection Extension and is enabled as a route reflector. If the BGP Route Reflection extension is not supported this value must be FALSE.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

dellNetBgpM2ClusterId 1.3.6.1.4.1.6027.20.1.1.7.1.2796.2
The configured Cluster-ID of the BGP Speaker. This will default to the BGP Speaker's DellNetBgpM2Identifier if this speaker is functioning as a route reflector and an explicit Cluster-ID has not been configured. A value of 0.0.0.0 will be present if Route Reflection is not enabled.
Status: current Access: read-only
OBJECT-TYPE    
  DellNetBgpM2Identifier  

dellNetBgpM2BaseScalarASConfedExts 1.3.6.1.4.1.6027.20.1.1.7.1.3065
OBJECT IDENTIFIER    

dellNetBgpM2ConfederationRouter 1.3.6.1.4.1.6027.20.1.1.7.1.3065.1
This value is TRUE if this implementation supports the BGP AS Confederations Extension and this router is configured to be in a confederation.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

dellNetBgpM2ConfederationId 1.3.6.1.4.1.6027.20.1.1.7.1.3065.2
The local Confederation Identification Number. This value will be zero (0) if this BGP Speaker is not a confederation router.
Status: current Access: read-only
OBJECT-TYPE    
  InetAutonomousSystemNumber  

dellNetBgpM2BaseScalarConfiguration 1.3.6.1.4.1.6027.20.1.1.8
OBJECT IDENTIFIER    

dellNetBgpM2CfgBaseScalarStorageType 1.3.6.1.4.1.6027.20.1.1.8.1
This object specifies the intended storage type for all configurable base scalars.
Status: current Access: read-write
OBJECT-TYPE    
  StorageType  

dellNetBgpM2CfgLocalAs 1.3.6.1.4.1.6027.20.1.1.8.2
The local autonomous system number. If the dellNetBgpM2AsSize is twoOctet, then the range is constrained to be 0-65535.
Status: current Access: read-write
OBJECT-TYPE    
  InetAutonomousSystemNumber  

dellNetBgpM2CfgLocalIdentifier 1.3.6.1.4.1.6027.20.1.1.8.3
The BGP Identifier of local system. Current practice is trending away from this value being treated as an IP address and more as a generic identifier.
Status: current Access: read-write
OBJECT-TYPE    
  DellNetBgpM2Identifier  

dellNetBgpM2CfgBaseScalarExtensions 1.3.6.1.4.1.6027.20.1.1.8.4
OBJECT IDENTIFIER    

dellNetBgpM2CfgBaseScalarNonCapExts 1.3.6.1.4.1.6027.20.1.1.8.4.1
OBJECT IDENTIFIER    

dellNetBgpM2CfgBaseScalarCapExts 1.3.6.1.4.1.6027.20.1.1.8.4.2
OBJECT IDENTIFIER    

dellNetBgpM2CfgBaseScalarReflectorExts 1.3.6.1.4.1.6027.20.1.1.8.4.1.2796
OBJECT IDENTIFIER    

dellNetBgpM2CfgRouteReflector 1.3.6.1.4.1.6027.20.1.1.8.4.1.2796.1
This value is set to true if this implementation will be supporting route reflection.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dellNetBgpM2CfgClusterId 1.3.6.1.4.1.6027.20.1.1.8.4.1.2796.2
The configured Cluster-ID of the BGP Speaker. This will default to the BGP Speaker's DellNetBgpM2Identifier if this speaker is functioning as a route reflector and an explicit Cluster-ID has not been configured. A value of 0.0.0.0 will be present if Route Reflection is not enabled.
Status: current Access: read-write
OBJECT-TYPE    
  DellNetBgpM2Identifier  

dellNetBgpM2CfgBaseScalarASConfedExts 1.3.6.1.4.1.6027.20.1.1.8.4.1.3065
OBJECT IDENTIFIER    

dellNetBgpM2CfgConfederationRouter 1.3.6.1.4.1.6027.20.1.1.8.4.1.3065.1
This value is set to true if this implementation will be supporting BGP AS Confederations.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

dellNetBgpM2CfgConfederationId 1.3.6.1.4.1.6027.20.1.1.8.4.1.3065.2
The local Confederation Identification Number. This value will be zero (0) if this BGP Speaker is not a confederation router.
Status: current Access: read-write
OBJECT-TYPE    
  InetAutonomousSystemNumber  

dellNetBgpM2Peer 1.3.6.1.4.1.6027.20.1.2
OBJECT IDENTIFIER    

dellNetBgpM2PeerData 1.3.6.1.4.1.6027.20.1.2.1
OBJECT IDENTIFIER    

dellNetBgpM2PeerTable 1.3.6.1.4.1.6027.20.1.2.1.1
BGP peer table. This table contains, one entry per remote BGP peer, any information about the connections with the remote BGP peers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2PeerEntry

dellNetBgpM2PeerEntry 1.3.6.1.4.1.6027.20.1.2.1.1.1
Entry containing information about the connection with a remote BGP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2PeerEntry  

dellNetBgpM2PeerInstance 1.3.6.1.4.1.6027.20.1.2.1.1.1.1
The routing instance index. Some BGP implementations permit the creation of multiple instances of a BGP routing process. An example includes RFC 2547 PE-CE routers. Implementations that do not support multiple routing instances should return 1 for this object. XXX TODO - We need to provide a way to configure these in the peer configuration table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dellNetBgpM2PeerIdentifier 1.3.6.1.4.1.6027.20.1.2.1.1.1.2
The BGP Identifier of this entry's remote BGP peer. This entry should be 0.0.0.0 unless the dellNetBgpM2PeerState is in the OpenConfirm or the Established state.
Status: current Access: read-only
OBJECT-TYPE    
  DellNetBgpM2Identifier  

dellNetBgpM2PeerState 1.3.6.1.4.1.6027.20.1.2.1.1.1.3
The remote BGP peer's FSM state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6)  

dellNetBgpM2PeerStatus 1.3.6.1.4.1.6027.20.1.2.1.1.1.4
Whether or not the BGP FSM for this remote peer is halted or running. The BGP FSM for a remote peer is halted after processing a Stop event. Likewise, it is in the running state after a Start event. The dellNetBgpM2PeerState will generally be in the idle state when the FSM is halted, although some extensions such as Graceful Restart will leave the peer in the Idle state but with the FSM running.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER halted(1), running(2)  

dellNetBgpM2PeerConfiguredVersion 1.3.6.1.4.1.6027.20.1.2.1.1.1.5
The configured version to originally start with this remote peer. The BGP speaker may permit negotiation to a lower version number of the protocol.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

dellNetBgpM2PeerNegotiatedVersion 1.3.6.1.4.1.6027.20.1.2.1.1.1.6
The negotiated version of BGP running between the two peers.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

dellNetBgpM2PeerLocalAddrType 1.3.6.1.4.1.6027.20.1.2.1.1.1.7
The address family of the local end of the peering session.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

dellNetBgpM2PeerLocalAddr 1.3.6.1.4.1.6027.20.1.2.1.1.1.8
The address of the local end of the peering session.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(4..20)  

dellNetBgpM2PeerLocalPort 1.3.6.1.4.1.6027.20.1.2.1.1.1.9
The local port for the TCP connection between the BGP peers.
Status: current Access: read-only
OBJECT-TYPE    
  InetPortNumber  

dellNetBgpM2PeerLocalAs 1.3.6.1.4.1.6027.20.1.2.1.1.1.10
Some implementations of BGP can represent themselves as multiple ASs. This is the AS that this peering session is representing itself as to the remote peer.
Status: current Access: read-only
OBJECT-TYPE    
  InetAutonomousSystemNumber  

dellNetBgpM2PeerRemoteAddrType 1.3.6.1.4.1.6027.20.1.2.1.1.1.11
The address family of the remote end of the peering session.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

dellNetBgpM2PeerRemoteAddr 1.3.6.1.4.1.6027.20.1.2.1.1.1.12
The address of the remote end of the peering session.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(4..20)  

dellNetBgpM2PeerRemotePort 1.3.6.1.4.1.6027.20.1.2.1.1.1.13
The remote port for the TCP connection between the BGP peers. In the case of a transport for which the notion of 'port' is irrelevant, an instance value of -1 should be returned by the agent for this object. Note that the objects dellNetBgpM2PeerLocalAddr, dellNetBgpM2PeerLocalPort, dellNetBgpM2PeerRemoteAddr and dellNetBgpM2PeerRemotePort provide the appropriate reference to the standard MIB TCP connection table. or even the ipv6 TCP MIB as in rfc2452.
Status: current Access: read-only
OBJECT-TYPE    
  InetPortNumber  

dellNetBgpM2PeerRemoteAs 1.3.6.1.4.1.6027.20.1.2.1.1.1.14
The remote autonomous system number.
Status: current Access: read-only
OBJECT-TYPE    
  InetAutonomousSystemNumber  

dellNetBgpM2PeerIndex 1.3.6.1.4.1.6027.20.1.2.1.1.1.15
This value is a unique index for the remote peer entry in the dellNetBgpM2PeerTable. It is assigned by the agent at the point of creation of the dellNetBgpM2PeerTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of dellNetBgpM2PeerIndex row instance values across rows of the dellNetBgpM2PeerTable. It is used to provide an index structure for other tables whose data is logically per-peer. For explicitly configured peers, this value will remain consistent until this row is deleted by deleting the configured peers. Unconfigured peers will generate a monotonically increasing number when a BGP FSM is built to process the peering session. Values in the dellNetBgpM2PeerTable and other tables utilizing dellNetBgpM2PeerIndex are expected to remain in existence for an arbitrary time after the unconfigured peer has been deleted in order to allow management applications to extract useful management information for those peers. Thus, an unconfigured peer using the same indices as the dellNetBgpM2PeerTable that comes up while this row still exists will re-utilize the same row.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dellNetBgpM2PeerErrors 1.3.6.1.4.1.6027.20.1.2.2
OBJECT IDENTIFIER    

dellNetBgpM2PeerErrorsTable 1.3.6.1.4.1.6027.20.1.2.2.1
On a per peer basis, this table reflects the last protocol-defined error encountered and reported on the peer session. If no entry for a given peer, by its dellNetBgpM2PeerIndex, exists in this table, then no such errors have been observed, reported, and recorded on the session.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2PeerErrorsEntry

dellNetBgpM2PeerErrorsEntry 1.3.6.1.4.1.6027.20.1.2.2.1.1
Each entry contains information about errors sent and received for a particular BGP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2PeerErrorsEntry  

dellNetBgpM2PeerLastErrorReceived 1.3.6.1.4.1.6027.20.1.2.2.1.1.1
The last error code and subcode received by this BGP Speaker via a NOTIFICATION message for this peer. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

dellNetBgpM2PeerLastErrorSent 1.3.6.1.4.1.6027.20.1.2.2.1.1.2
The last error code and subcode sent by this BGP Speaker via a NOTIFICATION message to this peer. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code, and the second byte contains the subcode.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

dellNetBgpM2PeerLastErrorReceivedTime 1.3.6.1.4.1.6027.20.1.2.2.1.1.3
The timestamp that the last NOTIFICATION was received from this peer.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

dellNetBgpM2PeerLastErrorSentTime 1.3.6.1.4.1.6027.20.1.2.2.1.1.4
The timestamp that the last NOTIFICATION was sent to this peer.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

dellNetBgpM2PeerLastErrorReceivedText 1.3.6.1.4.1.6027.20.1.2.2.1.1.5
This object contains an implementation specific explanation of the error that was reported.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

dellNetBgpM2PeerLastErrorSentText 1.3.6.1.4.1.6027.20.1.2.2.1.1.6
This object contains an implementation specific explanation of the error that is being reported.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

dellNetBgpM2PeerLastErrorReceivedData 1.3.6.1.4.1.6027.20.1.2.2.1.1.7
The last error code's data seen by this peer.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..4075)  

dellNetBgpM2PeerLastErrorSentData 1.3.6.1.4.1.6027.20.1.2.2.1.1.8
The last error code's data sent to this peer.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..4075)  

dellNetBgpM2PeerTimers 1.3.6.1.4.1.6027.20.1.2.3
OBJECT IDENTIFIER    

dellNetBgpM2PeerEventTimesTable 1.3.6.1.4.1.6027.20.1.2.3.1
A table reporting the per-peering session amount of time elapsed and update events since the peering session advanced into the Established state.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2PeerEventTimesEntry

dellNetBgpM2PeerEventTimesEntry 1.3.6.1.4.1.6027.20.1.2.3.1.1
Each row contains a set of statistics about time spent and events encountered in the peer session Established state.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2PeerEventTimesEntry  

dellNetBgpM2PeerFsmEstablishedTime 1.3.6.1.4.1.6027.20.1.2.3.1.1.1
This timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when a new peer is configured or the router is booted.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dellNetBgpM2PeerInUpdatesElapsedTime 1.3.6.1.4.1.6027.20.1.2.3.1.1.2
Elapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time dellNetBgpM2PeerInUpdates is incremented, the value of this object is set to zero (0). This value shall also be zero (0) when the peer is not in the Established state
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dellNetBgpM2PeerConfiguredTimersTable 1.3.6.1.4.1.6027.20.1.2.3.2
Per peer management data on BGP session timers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2PeerConfiguredTimersEntry

dellNetBgpM2PeerConfiguredTimersEntry 1.3.6.1.4.1.6027.20.1.2.3.2.1
Each entry corresponds to the current state of BGP timers on a given peering session.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2PeerConfiguredTimersEntry  

dellNetBgpM2PeerConnectRetryInterval 1.3.6.1.4.1.6027.20.1.2.3.2.1.1
Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

dellNetBgpM2PeerHoldTimeConfigured 1.3.6.1.4.1.6027.20.1.2.3.2.1.2
Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (dellNetBgpM2PeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 3..65535  

dellNetBgpM2PeerKeepAliveConfigured 1.3.6.1.4.1.6027.20.1.2.3.2.1.3
Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in dellNetBgpM2PeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by dellNetBgpM2PeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of dellNetBgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 1..21845  

dellNetBgpM2PeerMinASOrigInterval 1.3.6.1.4.1.6027.20.1.2.3.2.1.4
Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

dellNetBgpM2PeerMinRouteAdverInterval 1.3.6.1.4.1.6027.20.1.2.3.2.1.5
Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

dellNetBgpM2PeerNegotiatedTimersTable 1.3.6.1.4.1.6027.20.1.2.3.3
Current values of per-peer timers which can be dynamically set in the dellNetBgpM2PeerConfiguredTimersTable. Values reflected in this table are the current operational values, after negotiation from values derived from initial configuration or last set from dellNetBgpM2PeerConfiguredTimersTable row instances.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2PeerNegotiatedTimersEntry

dellNetBgpM2PeerNegotiatedTimersEntry 1.3.6.1.4.1.6027.20.1.2.3.3.1
Each entry reflects a value of the currently operational, negotiated timers as reflected in the DellNetBgpM2PeerNegotiatedTimersEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2PeerNegotiatedTimersEntry  

dellNetBgpM2PeerHoldTime 1.3.6.1.4.1.6027.20.1.2.3.3.1.1
The value of this object is calculated by this BGP Speaker as being; zero (0) - if this was the value sent by the peer and this value is permitted by this BGP Speaker. In this case, no keepalive messages are sent and the Hold Timer is not set. At least three (3). This value is the smaller of the value sent by this peer in the OPEN message and dellNetBgpM2PeerHoldTimeConfigured for this peer. This value is only defined when the peering session is in the Established state.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 3..65535  

dellNetBgpM2PeerKeepAlive 1.3.6.1.4.1.6027.20.1.2.3.3.1.2
Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with dellNetBgpM2PeerHoldTime, it has the same proportion as what dellNetBgpM2PeerKeepAliveConfigured has when compared with dellNetBgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), it indicates that the KeepAlive timer has not been established with the peer, or, the value of dellNetBgpM2PeerKeepAliveConfigured is zero (0). This value is only defined when the peering session is in the Established state.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0 | 1..21845  

dellNetBgpM2PeerCapabilities 1.3.6.1.4.1.6027.20.1.2.4
OBJECT IDENTIFIER    

dellNetBgpM2PeerCapsAnnouncedTable 1.3.6.1.4.1.6027.20.1.2.4.1
This table contains the capabilities that are supported for a given peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2PeerCapsAnnouncedEntry

dellNetBgpM2PeerCapsAnnouncedEntry 1.3.6.1.4.1.6027.20.1.2.4.1.1
These entries are keyed by a BGP-4 peer remote address and the BGP Capability Code
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2PeerCapsAnnouncedEntry  

dellNetBgpM2PeerCapAnnouncedCode 1.3.6.1.4.1.6027.20.1.2.4.1.1.1
The BGP Capability Advertisement Capability Code.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

dellNetBgpM2PeerCapAnnouncedIndex 1.3.6.1.4.1.6027.20.1.2.4.1.1.2
Multiple instances of a given capability may be sent bgp a BGP speaker. This variable is used to index them.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..128  

dellNetBgpM2PeerCapAnnouncedValue 1.3.6.1.4.1.6027.20.1.2.4.1.1.3
The value of the announced capability.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

dellNetBgpM2PeerCapsReceivedTable 1.3.6.1.4.1.6027.20.1.2.4.2
This table contains the capabilities that are supported for a given peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM24PeerCapsReceivedEntry

dellNetBgpM2PeerCapsReceivedEntry 1.3.6.1.4.1.6027.20.1.2.4.2.1
These entries are keyed by a BGP-4 peer remote address and the BGP Capability Code
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM24PeerCapsReceivedEntry  

dellNetBgpM2PeerCapReceivedCode 1.3.6.1.4.1.6027.20.1.2.4.2.1.1
The BGP Capability Advertisement Capability Code.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

dellNetBgpM2PeerCapReceivedIndex 1.3.6.1.4.1.6027.20.1.2.4.2.1.2
Multiple instances of a given capability may be sent bgp a BGP speaker. This variable is used to index them.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..128  

dellNetBgpM2PeerCapReceivedValue 1.3.6.1.4.1.6027.20.1.2.4.2.1.3
The value of the announced capability.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

dellNetBgpM2PeerCounters 1.3.6.1.4.1.6027.20.1.2.6
OBJECT IDENTIFIER    

dellNetBgpM2PeerCountersTable 1.3.6.1.4.1.6027.20.1.2.6.1
The counters associated with a BGP Peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2PeerCountersEntry

dellNetBgpM2PeerCountersEntry 1.3.6.1.4.1.6027.20.1.2.6.1.1
Each entry contains counters of message transmissions and FSM transitions for a given BGP Peering session.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2PeerCountersEntry  

dellNetBgpM2PeerInUpdates 1.3.6.1.4.1.6027.20.1.2.6.1.1.1
The number of BGP UPDATE messages received on this connection. This object should be initialized to zero (0) when the connection is established.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dellNetBgpM2PeerOutUpdates 1.3.6.1.4.1.6027.20.1.2.6.1.1.2
The number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero (0) when the connection is established.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dellNetBgpM2PeerInTotalMessages 1.3.6.1.4.1.6027.20.1.2.6.1.1.3
The total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dellNetBgpM2PeerOutTotalMessages 1.3.6.1.4.1.6027.20.1.2.6.1.1.4
The total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dellNetBgpM2PeerFsmEstablishedTrans 1.3.6.1.4.1.6027.20.1.2.6.1.1.5
The total number of times the BGP FSM transitioned into the established state for this peer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dellNetBgpM2PeerInKeepalives 1.3.6.1.4.1.6027.20.1.2.6.1.1.6
The number of Keepalive messages received from a peer.Implemented by Dell.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dellNetBgpM2PeerOutKeepalives 1.3.6.1.4.1.6027.20.1.2.6.1.1.7
The number of Keepalive messages sent to a peer. Implemented by Dell.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dellNetBgpM2PeerInOpen 1.3.6.1.4.1.6027.20.1.2.6.1.1.8
The number of Open messages received from a peer. Implemented by Dell.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dellNetBgpM2PeerOutOpen 1.3.6.1.4.1.6027.20.1.2.6.1.1.9
The number of Open messages sent to a peer. Implemented by Dell.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dellNetBgpM2PeerInRteRefresh 1.3.6.1.4.1.6027.20.1.2.6.1.1.10
The number of Route Refresh messages received from a peer. Implemented by Dell.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dellNetBgpM2PeerOutRteRefresh 1.3.6.1.4.1.6027.20.1.2.6.1.1.11
The number of Route Refresh messages sent to a peer. Implemented by Dell.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dellNetBgpM2PrefixCountersTable 1.3.6.1.4.1.6027.20.1.2.6.2
Additional per-peer, per AFI SAFI counters for prefixes
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2PrefixCountersEntry

dellNetBgpM2PrefixCountersEntry 1.3.6.1.4.1.6027.20.1.2.6.2.1
Entry containing information about a bgp-peers prefix counters.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2PrefixCountersEntry  

dellNetBgpM2PrefixCountersAfi 1.3.6.1.4.1.6027.20.1.2.6.2.1.1
The AFI index of the per-peer, per prefix counters
Status: current Access: read-only
OBJECT-TYPE    
  DellNetBgpM2Afi  

dellNetBgpM2PrefixCountersSafi 1.3.6.1.4.1.6027.20.1.2.6.2.1.2
The SAFI index of the per-peer, per prefix counters
Status: current Access: read-only
OBJECT-TYPE    
  DellNetBgpM2Safi  

dellNetBgpM2PrefixInPrefixes 1.3.6.1.4.1.6027.20.1.2.6.2.1.7
The number of prefixes received from a peer and are stored in the Adj-Ribs-In for that peer.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dellNetBgpM2PrefixInPrefixesAccepted 1.3.6.1.4.1.6027.20.1.2.6.2.1.8
The number of prefixes for a peer that are installed in the Adj-Ribs-In and are eligible to become active in the Loc-Rib.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dellNetBgpM2PrefixInPrefixesRejected 1.3.6.1.4.1.6027.20.1.2.6.2.1.9
The number of prefixes for a peer that are installed in the Adj-Ribs-In and are NOT eligible to become active in the Loc-Rib.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dellNetBgpM2PrefixOutPrefixes 1.3.6.1.4.1.6027.20.1.2.6.2.1.10
The number of prefixes for a peer that are installed in that peers Adj-Ribs-Out.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dellNetBgpM2PrefixWdrawnByPeer 1.3.6.1.4.1.6027.20.1.2.6.2.1.11
The number of prefixes withdrawn by a peer. Implemened by Dell.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dellNetBgpM2PrefixWdrawnFromPeer 1.3.6.1.4.1.6027.20.1.2.6.2.1.12
The number of prefixes withdrawn from a peer. Implemened by Dell.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

dellNetBgpM2PeerExtensions 1.3.6.1.4.1.6027.20.1.2.7
OBJECT IDENTIFIER    

dellNetBgpM2PeerNonCapExts 1.3.6.1.4.1.6027.20.1.2.7.1
OBJECT IDENTIFIER    

dellNetBgpM2PeerCapExts 1.3.6.1.4.1.6027.20.1.2.7.2
OBJECT IDENTIFIER    

dellNetBgpM2PeerRouteReflectionExts 1.3.6.1.4.1.6027.20.1.2.7.1.2796
OBJECT IDENTIFIER    

dellNetBgpM2PeerReflectorClientTable 1.3.6.1.4.1.6027.20.1.2.7.1.2796.1
Table of route reflection client settings on a per-peer basis.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2PeerReflectorClientEntry

dellNetBgpM2PeerReflectorClientEntry 1.3.6.1.4.1.6027.20.1.2.7.1.2796.1.1
Entry containing data on a per-peer basis on whether the peer is configured as a route reflector client.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2PeerReflectorClientEntry  

dellNetBgpM2PeerReflectorClient 1.3.6.1.4.1.6027.20.1.2.7.1.2796.1.1.1
This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient indicates that this peer is not a reflector client. A value of client indicates that this peer is a reflector client that is not fully meshed with other reflector clients. A value of meshedClient indicates that the peer is a reflector client and is fully meshed with all other reflector clients. This value must be nonClient (0) for BGP external peers.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER nonClient(0), client(1), meshedClient(2)  

dellNetBgpM2PeerASConfederationExts 1.3.6.1.4.1.6027.20.1.2.7.1.3065
OBJECT IDENTIFIER    

dellNetBgpM2PeerConfedMemberTable 1.3.6.1.4.1.6027.20.1.2.7.1.3065.1
Table of confederation member settings on a per-peer basis.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2PeerConfedMemberEntry

dellNetBgpM2PeerConfedMemberEntry 1.3.6.1.4.1.6027.20.1.2.7.1.3065.1.1
Entry containing data on a per-peer basis on whether the peer is configured as a BGP confederation member.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2PeerConfedMemberEntry  

dellNetBgpM2PeerConfedMember 1.3.6.1.4.1.6027.20.1.2.7.1.3065.1.1.1
This value indicates whether the given peer is in our confederation or not.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

dellNetBgpM2PeerConfiguration 1.3.6.1.4.1.6027.20.1.2.8
OBJECT IDENTIFIER    

dellNetBgpM2CfgPeerAdminStatusTable 1.3.6.1.4.1.6027.20.1.2.8.1
Table containing rows for administratively starting and stopping peering sessions.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2CfgPeerAdminStatusEntry

dellNetBgpM2CfgPeerAdminStatusEntry 1.3.6.1.4.1.6027.20.1.2.8.1.1
Entry containing row for administratively starting and stopping peers.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2CfgPeerAdminStatusEntry  

dellNetBgpM2CfgPeerAdminStatus 1.3.6.1.4.1.6027.20.1.2.8.1.1.1
This object allows the Manual Stop and Manual Start events to be sent to an activated peering session.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER stop(1), start(2)  

dellNetBgpM2CfgPeerNextIndex 1.3.6.1.4.1.6027.20.1.2.8.2
This object contains the next appropriate value to use as an index for creation of a row instance in in the dellNetBgpM2CfgPeerTable. If the number of available entries in the dellNetBgpM2CfgPeerTable is exhausted, a retrieval value of this object instance will return 0. A value of 0 may also be returned if the agent is otherwise incapable of dellNetBgpM2CfgPeerTable row creation at the time of dellNetBgpM2CfgPeerNextIndex retrieval.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..65535  

dellNetBgpM2CfgPeerTable 1.3.6.1.4.1.6027.20.1.2.8.3
BGP configuration peer table. This table allows the configuration of the parameters for a session with a BGP peer. +++wayne provide description of how config should be done for a peer per table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2CfgPeerEntry

dellNetBgpM2CfgPeerEntry 1.3.6.1.4.1.6027.20.1.2.8.3.1
Entry containing information set up by a management entity to configure a connection with a BGP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2CfgPeerEntry  

dellNetBgpM2CfgPeerConfiguredVersion 1.3.6.1.4.1.6027.20.1.2.8.3.1.1
The configured version to originally start with this peer. The BGP speaker may permit negotiation to a lower version number of the protocol depending on the set value of dellNetBgpM2CfgAllowVersionNegotiation.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..255  

dellNetBgpM2CfgAllowVersionNegotiation 1.3.6.1.4.1.6027.20.1.2.8.3.1.2
If set to true, during session establishment with this peer, negotiation to a version lower than that specified in dellNetBgpM2CfgPeerConfiguredVersion will be allowed.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

dellNetBgpM2CfgPeerLocalAddrType 1.3.6.1.4.1.6027.20.1.2.8.3.1.3
The address family of the speakers of this BGP session.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

dellNetBgpM2CfgPeerLocalAddr 1.3.6.1.4.1.6027.20.1.2.8.3.1.4
The address of the local end of the peering session.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(4..20)  

dellNetBgpM2CfgPeerLocalAs 1.3.6.1.4.1.6027.20.1.2.8.3.1.5
Autonomous system represented to peer on peering session initialization. Some implementations of BGP can represent themselves as multiple ASes. These implementations can set this to an alternate autonomous system. If this object is set to zero (0) at the point this row instance is set to active, then the implementation will initialize this session representing itself as the value of dellNetBgpM2CfgLocalAs.
Status: current Access: read-create
OBJECT-TYPE    
  InetAutonomousSystemNumber  

dellNetBgpM2CfgPeerRemoteAddrType 1.3.6.1.4.1.6027.20.1.2.8.3.1.6
The address family of the speakers of the remote BGP session.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

dellNetBgpM2CfgPeerRemoteAddr 1.3.6.1.4.1.6027.20.1.2.8.3.1.7
The address of the remote end (destination address of peer) for peering session.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress Size(4..20)  

dellNetBgpM2CfgPeerRemoteAs 1.3.6.1.4.1.6027.20.1.2.8.3.1.8
Autonomous system number of the remote peer.
Status: current Access: read-create
OBJECT-TYPE    
  InetAutonomousSystemNumber  

dellNetBgpM2CfgPeerEntryStorageType 1.3.6.1.4.1.6027.20.1.2.8.3.1.9
This object type specifies the intended storage type for the dellNetBgpM2CfgPeerEntry row instance.
Status: current Access: read-create
OBJECT-TYPE    
  StorageType  

dellNetBgpM2CfgPeerError 1.3.6.1.4.1.6027.20.1.2.8.3.1.10
This value indicates the current error status of the row denoting the configured error status. If this row is still under creation (has not been activated dellNetBgpM2CfgPeerRowEntryStatus), then this instance will be set to not-activated (1). At the point that the row is activated, dellNetBgpM2CfgPeerError will reflect the error status of the row data itself. If there is another session already activated with the same local and remote addresses as denoted by {dellNetBgpM2CfgPeerLocalAddrType, dellNetBgpM2CfgPeerLocalAddr, dellNetBgpM2CfgPeerRemoteAddr}, then the value of this will be set to err-duplicate-peering-session (2). If this row is associated with a peer session whose initialization has been attempted, the value will be set to activated (3) (and, dellNetBgpM2PeerCfgPeerEntry will be set to the row instance of the entry in the dellNetBgpM2PeerTable which reflects the state of the peering session). Note that this object only reflects the error as a function of the attempted activation of this row as containing data for a bgp peering session. The actual state of the session at the point of any protocol exchange or session state machine initiation is reflected in the dellNetBgpM2PeerTable row instance (as reflected through dellNetBgpM2CfgPeerPeerEntry) associated with this row instance.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), notActivated(1), errDuplicatePeeringSession(2), activated(3)  

dellNetBgpM2CfgPeerBgpPeerEntry 1.3.6.1.4.1.6027.20.1.2.8.3.1.11
Upon activation of the session data contained in this row instance, this object points to an instance of a row within the dellNetBgpM2PeerTable reflecting the session in its initializing or operational state. Retrieval of this column instance will always yield a value of {0.0} unless the session has successfully been activated (via dellNetBgpM2CfgPeerRowEntryStatus). Such row instances will always have a value of dellNetBgpM2CfgPeerError which is activated (3).
Status: current Access: read-only
OBJECT-TYPE    
  RowPointer  

dellNetBgpM2CfgPeerRowEntryStatus 1.3.6.1.4.1.6027.20.1.2.8.3.1.12
This object type is used to control creation, activation, and deletion of this row instance.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

dellNetBgpM2CfgPeerIndex 1.3.6.1.4.1.6027.20.1.2.8.3.1.13
Uniquely identifies an instance of a peer row, as an element of configuration.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 1..65535  

dellNetBgpM2CfgPeerStatus 1.3.6.1.4.1.6027.20.1.2.8.3.1.14
This specifies the state of the peering session upon activation. If disabled, the FSM is in the halted state and no Automatic Start events are generated. If enabled, the FSM is in the running state and Automatic Start events may be generated.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER halted(1), running(2)  

dellNetBgpM2CfgPeerTimersTable 1.3.6.1.4.1.6027.20.1.2.8.4
Table for configuration of per-peer timers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2CfgPeerTimersEntry

dellNetBgpM2CfgPeerTimersEntry 1.3.6.1.4.1.6027.20.1.2.8.4.1
Entry containing per-peer timer configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2CfgPeerTimersEntry  

dellNetBgpM2CfgPeerConnectRetryInterval 1.3.6.1.4.1.6027.20.1.2.8.4.1.1
Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 1..65535  

dellNetBgpM2CfgPeerHoldTimeConfigured 1.3.6.1.4.1.6027.20.1.2.8.4.1.2
Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (dellNetBgpM2PeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 3..65535  

dellNetBgpM2CfgPeerKeepAliveConfigured 1.3.6.1.4.1.6027.20.1.2.8.4.1.3
Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages frequency relative to the value specified in dellNetBgpM2PeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by dellNetBgpM2PeerKeepAlive. A reasonable maximum value for this timer would be configured to be one third of that of dellNetBgpM2PeerHoldTimeConfigured. If the value of this object is zero (0), no periodical KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0 | 1..21845  

dellNetBgpM2CfgPeerMinASOrigInterval 1.3.6.1.4.1.6027.20.1.2.8.4.1.4
Time interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

dellNetBgpM2CfgPeerMinRouteAdverInter 1.3.6.1.4.1.6027.20.1.2.8.4.1.5
Time interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32 0..65535  

dellNetBgpM2CfgPeerExtensions 1.3.6.1.4.1.6027.20.1.2.8.5
OBJECT IDENTIFIER    

dellNetBgpM2CfgPeerNonCapExts 1.3.6.1.4.1.6027.20.1.2.8.5.1
OBJECT IDENTIFIER    

dellNetBgpM2CfgPeerCapExts 1.3.6.1.4.1.6027.20.1.2.8.5.2
OBJECT IDENTIFIER    

dellNetBgpM2CfgPeerRouteReflectionExts 1.3.6.1.4.1.6027.20.1.2.8.5.1.2796
OBJECT IDENTIFIER    

dellNetBgpM2CfgPeerReflectorClientTable 1.3.6.1.4.1.6027.20.1.2.8.5.1.2796.1
Table of route reflection client settings on a per-peer basis.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2CfgPeerReflectorClientEntry

dellNetBgpM2CfgPeerReflectorClientEntry 1.3.6.1.4.1.6027.20.1.2.8.5.1.2796.1.1
Entry containing data on a per-peer basis on whether the peer is configured as a route reflector client.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2CfgPeerReflectorClientEntry  

dellNetBgpM2CfgPeerReflectorClient 1.3.6.1.4.1.6027.20.1.2.8.5.1.2796.1.1.1
This value indicates whether the given peer is a reflector client of this router, or not. A value of nonClient indicates that this peer is not a reflector client. A value of client indicates that this peer is a reflector client that is not fully meshed with other reflector clients. A value of meshedClient indicates that the peer is a reflector client and is fully meshed with all other reflector clients. This value must be nonClient (0) for BGP external peers.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER nonClient(0), client(1), meshedClient(2)  

dellNetBgpM2CfgPeerASConfederationExts 1.3.6.1.4.1.6027.20.1.2.8.5.1.3065
OBJECT IDENTIFIER    

dellNetBgpM2CfgPeerConfedMemberTable 1.3.6.1.4.1.6027.20.1.2.8.5.1.3065.1
Table of confederation member settings on a per-peer basis.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2CfgPeerConfedMemberEntry

dellNetBgpM2CfgPeerConfedMemberEntry 1.3.6.1.4.1.6027.20.1.2.8.5.1.3065.1.1
Entry containing data on a per-peer basis on whether the peer is configured as a BGP confederation member.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2CfgPeerConfedMemberEntry  

dellNetBgpM2CfgPeerConfedMember 1.3.6.1.4.1.6027.20.1.2.8.5.1.3065.1.1.1
This value indicates whether the given peer is in our confederation or not.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

dellNetBgpM2Rib 1.3.6.1.4.1.6027.20.1.3
OBJECT IDENTIFIER    

dellNetBgpM2NlriTable 1.3.6.1.4.1.6027.20.1.3.1
The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers. Collectively, this represents the Adj-Ribs-In. The route where dellNetBgpM2NlriBest is TRUE represents, for this NLRI, the route that is installed in the LocRib from the Adj-Ribs-In.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2NlriEntry

dellNetBgpM2NlriEntry 1.3.6.1.4.1.6027.20.1.3.1.1
Information about a path to a network.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2NlriEntry  

dellNetBgpM2NlriIndex 1.3.6.1.4.1.6027.20.1.3.1.1.1
This index allows for multiple instances of a base prefix for a certain AFI SAFI from a given peer. This is currently useful for two things: 1. Allowing for a peer in future implementations to send more than a single route instance. 2. Allow for extensions which extend the NLRI field to send the same prefix while utilizing other extension specific information. An example of this is RFC 3107 - Carrying MPLS labels in BGP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dellNetBgpM2NlriAfi 1.3.6.1.4.1.6027.20.1.3.1.1.2
The address family of the prefix for this NLRI.
Status: current Access: read-only
OBJECT-TYPE    
  DellNetBgpM2Afi  

dellNetBgpM2NlriSafi 1.3.6.1.4.1.6027.20.1.3.1.1.3
The subsequent address family of the prefix for this NLRI
Status: current Access: read-only
OBJECT-TYPE    
  DellNetBgpM2Safi  

dellNetBgpM2NlriPrefixType 1.3.6.1.4.1.6027.20.1.3.1.1.4
The type of the IP address prefix in the Network Layer Reachability Information field. The value of this object is derived from the appropriate value from the dellNetBgpM2NlriAfi field. Where an appropriate InetAddressType is not available, the value of the object must be unknown(0). XXX TODO - This seems like a hack.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

dellNetBgpM2NlriPrefix 1.3.6.1.4.1.6027.20.1.3.1.1.5
An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by dellNetBgpM2PathAttrAddrPrefixLen. Any bits beyond the length specified by dellNetBgpM2PathAttrAddrPrefixLen are zeroed.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(4..20)  

dellNetBgpM2NlriPrefixLen 1.3.6.1.4.1.6027.20.1.3.1.1.6
Length in bits of the address prefix in the Network Layer Reachability Information field.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressPrefixLength  

dellNetBgpM2NlriBest 1.3.6.1.4.1.6027.20.1.3.1.1.7
An indication of whether or not this route was chosen as the best BGP4 route.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

dellNetBgpM2NlriCalcLocalPref 1.3.6.1.4.1.6027.20.1.3.1.1.8
The degree of preference calculated by the receiving BGP4 speaker for an advertised route.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dellNetBgpM2PathAttrIndex 1.3.6.1.4.1.6027.20.1.3.1.1.9
This value is a unique index for the per-NLRI entry in the dellNetBgpM2PathAttrTable. It is assigned by the agent at the point of creation of the dellNetBgpM2PathAttrTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of dellNetBgpM2PathAttrIndex row instance values across rows of the dellNetBgpM2PeerAttrTable. It is used to provide an index structure for other tables whose data is logically per-peer, per-NLRI.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dellNetBgpM2NlriOpaqueType 1.3.6.1.4.1.6027.20.1.3.1.1.10
This object enumerates the type of the row that is pointed to in the table row dellNetBgpM2NlriOpaquePointer instance, if dellNetBgpM2NlriOpaquePointer is in fact not a zero length. dellNetBgpM2NlriOpaqueType is necessary since the data referenced by dellNetBgpM2NlriOpaquePointer is opaque to BGP. For example, in the case of RFC 3107, the label stack that is pointed to may occur in the mplsLabelStackTable from the MPLS-LSR-MIB, and the instance value of dellNetBgpM2NlriOpaqueType would be bgpMplsLabelStack(1).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), bgpMplsLabelStack(1)  

dellNetBgpM2NlriOpaquePointer 1.3.6.1.4.1.6027.20.1.3.1.1.11
Pointer to a row that decomposes the data that is opaque to the BGP MIB but is sent in the NLRI. This RowPointer has zero (0) length data instance if dellNetBgpM2NlriOpaqueType is none.
Status: current Access: read-only
OBJECT-TYPE    
  RowPointer  

dellNetBgpM2AdjRibsOutTable 1.3.6.1.4.1.6027.20.1.3.2
This table contains on a per-peer basis one or more routes from the dellNetBgpM2NlriTable that have been placed in this peer's Adj-Ribs-Out.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2AdjRibsOutEntry

dellNetBgpM2AdjRibsOutEntry 1.3.6.1.4.1.6027.20.1.3.2.1
List of BGP routes that have been placed into a peer's Adj-Ribs-Out.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2AdjRibsOutEntry  

dellNetBgpM2AdjRibsOutIndex 1.3.6.1.4.1.6027.20.1.3.2.1.1
Certain extensions to BGP permit multiple instance of a per afi, per safi prefix to be advertised to a peer. This object allows the enumeration of them.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dellNetBgpM2AdjRibsOutRoute 1.3.6.1.4.1.6027.20.1.3.2.1.2
This object points to the route in the dellNetBgpM2NlriTable that corresponds to the entry in the peer's Adj-Rib-Out. Outgoing route maps are not reflected at this point as those are part of the Update-Send process.
Status: current Access: read-only
OBJECT-TYPE    
  RowPointer  

dellNetBgpM2PathAttrCount 1.3.6.1.4.1.6027.20.1.3.3
The number of entries in the dellNetBgpM2PathAttrTable.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

dellNetBgpM2PathAttrTable 1.3.6.1.4.1.6027.20.1.3.4
Provides per advertised network-prefix attribute data, as advertised over a peering session.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2PathAttrEntry

dellNetBgpM2PathAttrEntry 1.3.6.1.4.1.6027.20.1.3.4.1
Each entry contains data about a given network prefix, per-prefix and per-advertising peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2PathAttrEntry  

dellNetBgpM2PathAttrOrigin 1.3.6.1.4.1.6027.20.1.3.4.1.1
The ultimate origin of the path information.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER igp(1), egp(2), incomplete(3)  

dellNetBgpM2PathAttrNextHopAddrType 1.3.6.1.4.1.6027.20.1.3.4.1.2
The address family of the address for the border router that should be used to access the destination network.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

dellNetBgpM2PathAttrNextHop 1.3.6.1.4.1.6027.20.1.3.4.1.3
The address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet. The address family of this object will be the same as that of the prefix in this row. Note that for RFC2545 style double nexthops, this object will always contain the global scope nexthop. dellNetBgpM2LinkLocalNextHopTable will contain the linklocal scope nexthop. In the case that the mechanism documented in draft-kato-bgp-ipv6-link-local-00.txt is used and only a link local nexthop has been sent, , dellNetBgpM2LinkLocalNextHopPresent will be false and dellNetBgpM2PathAttrNextHop will contain the link local nexthop.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(4..20)  

dellNetBgpM2PathAttrMedPresent 1.3.6.1.4.1.6027.20.1.3.4.1.4
Whether or not the MED value is present. If it is not present, the dellNetBgpM2PathAttrMed object has no useful value and should be set to 0.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

dellNetBgpM2PathAttrMed 1.3.6.1.4.1.6027.20.1.3.4.1.5
This metric is used to discriminate between multiple exit points to an adjacent autonomous system.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dellNetBgpM2PathAttrLocalPrefPresent 1.3.6.1.4.1.6027.20.1.3.4.1.6
Whether or not the LocalPref value is present. If it is not present, the dellNetBgpM2PathAttrLocalPref object has no useful value and should be set to 0.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

dellNetBgpM2PathAttrLocalPref 1.3.6.1.4.1.6027.20.1.3.4.1.7
The originating BGP4 speakers degree of preference for an advertised route.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dellNetBgpM2PathAttrAtomicAggregate 1.3.6.1.4.1.6027.20.1.3.4.1.8
When this object is set to atomicAggregatePresent, the ATOMIC_AGGREGATE Path Attribute is present and indicates that the NLRI MUST NOT be made more specific.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER atomicAggregatePresent(1), atomicAggregateMissing(2)  

dellNetBgpM2PathAttrAggregatorAS 1.3.6.1.4.1.6027.20.1.3.4.1.9
The AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. Note propagation of AS of zero is illegal in the Internet.
Status: current Access: read-only
OBJECT-TYPE    
  InetAutonomousSystemNumber  

dellNetBgpM2PathAttrAggregatorAddr 1.3.6.1.4.1.6027.20.1.3.4.1.10
The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.
Status: current Access: read-only
OBJECT-TYPE    
  DellNetBgpM2Identifier  

dellNetBgpM2AsPathCalcLength 1.3.6.1.4.1.6027.20.1.3.4.1.11
This value represents the calculated length of the AS Path according to the rules of the BGP specification. This value is used in route selection.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dellNetBgpM2AsPathString 1.3.6.1.4.1.6027.20.1.3.4.1.12
This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is implementation-dependent, and should be designed for operator readability.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

dellNetBgpM2AsPathIndex 1.3.6.1.4.1.6027.20.1.3.4.1.13
This value is a unique index for the decomposed AS Path in the dellNetBgpM2AsPathTable. It is assigned by the agent at the point of creation of the dellNetBgpM2AsPathTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of dellNetBgpM2AsPathIndex row instance values across rows of the dellNetBgpM2AsPathTable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dellNetBgpM2AsPath4byteTable 1.3.6.1.4.1.6027.20.1.3.5
This table is present for BGP speakers that support the AS 4byte specification and are functioning as a router between 2-byte and 4-byte AS space.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2AsPath4byteEntry

dellNetBgpM2AsPath4byteEntry 1.3.6.1.4.1.6027.20.1.3.5.1
Each row contains the information for the AS 4-byte extension's NEW_AS_PATH and NEW_AGGREGATOR attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2AsPath4byteEntry  

dellNetBgpM2AsPath4bytePathPresent 1.3.6.1.4.1.6027.20.1.3.5.1.1
This value may only be true if this BGP Speaker is functioning as a router between ASs that are in 2-byte and 4-byte AS space. If this value is true, then the NEW_AS_PATH attributes are present and the 4-byte versions of the appropriate path attributes are in this row. If this value is false, then the following values will be present in the row: dellNetBgpM2PathAttrAggregatorAS - zero (0). dellNetBgpM2AsPathCalcLength - zero (0). dellNetBgpM2AsPathString - zero (0) length string. dellNetBgpM2AsPathIndex - zero (0).
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

dellNetBgpM2AsPath4byteAggregatorAS 1.3.6.1.4.1.6027.20.1.3.5.1.2
The NEW_AGGREGATOR AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute. Note propagation of AS of zero is illegal in the Internet.
Status: current Access: read-only
OBJECT-TYPE    
  InetAutonomousSystemNumber  

dellNetBgpM2AsPath4byteCalcLength 1.3.6.1.4.1.6027.20.1.3.5.1.3
This value represents the calculated length of the NEW_AS_PATH according to the rules of the BGP specification. This value is used in route selection.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dellNetBgpM2AsPath4byteString 1.3.6.1.4.1.6027.20.1.3.5.1.4
This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is implementation-dependent, and should be designed for operator readability.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

dellNetBgpM2AsPath4byteIndex 1.3.6.1.4.1.6027.20.1.3.5.1.5
This value is a unique index for the decomposed AS Path in the dellNetBgpM2AsPathTable. It is assigned by the agent at the point of creation of the dellNetBgpM2AsPathTable row entry. While its value is guaranteed to be unique at any time, it is otherwise opaque to the management application with respect to its value or the contiguity of dellNetBgpM2AsPathIndex row instance values across rows of the dellNetBgpM2AsPathTable.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dellNetBgpM2AsPathTable 1.3.6.1.4.1.6027.20.1.3.6
The BGP-4 Path Attribute AS Path Table contains the per network path (NLRI) AS PATH data received from the advertising BGP peer.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2AsPathEntry

dellNetBgpM2AsPathTableEntry 1.3.6.1.4.1.6027.20.1.3.6.1
Information about an AS path provided with a path to a network.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2AsPathEntry  

dellNetBgpM2AsPathSegmentIndex 1.3.6.1.4.1.6027.20.1.3.6.1.1
A per-AS path segment index. This will index a set of autonomous systems in an AS path which are part of the same sequence or set (as determined by the row value of dellNetBgpM2AsPathType, which should be the same value for each dellNetBgpM2AsPathTable entry indexed by the same (dellNetBgpM2PathAttrIndex, dellNetBgpM2AsPathIndex) pair).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dellNetBgpM2AsPathElementIndex 1.3.6.1.4.1.6027.20.1.3.6.1.2
A per-AS element index. This will index a particular AS within a sequence or set of autonomous systems in an AS path.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dellNetBgpM2AsPathType 1.3.6.1.4.1.6027.20.1.3.6.1.3
The type of sequence in which this asPath was advertised as an attribute. Note that all asPath row instances for a given (dellNetBgpM2PathAttrIndex, dellNetBgpM2AsPathIndex) index pair will have their dellNetBgpM2AsPathType set to the same value. The values for dellNetBgpM2AsPathType are interpreted as defined in the base BGP document and the BGP AS Confederations document.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER asSet(1), asSequence(2), confedSequence(3), confedSet(4)  

dellNetBgpM2AsPathElementValue 1.3.6.1.4.1.6027.20.1.3.6.1.4
An AS value for an AS the related NLRI traversed in the propagation of its advertisement. This value is to be interpreted in the context of the sequence implied by dellNetBgpM2AsPathIndex and dellNetBgpM2AsPathType (and, in sequence of the other table rows with the same value of dellNetBgpM2PathAttrIndex and dellNetBgpM2AsPathIndex).
Status: current Access: read-only
OBJECT-TYPE    
  InetAutonomousSystemNumber  

dellNetBgpM2PathAttrUnknownTable 1.3.6.1.4.1.6027.20.1.3.7
The BGP-4 Path Attribute Unknown Table contains the per network path (NLRI) data on the path attributes advertised with a route but not known to the local BGP implementation or not otherwise capable of being returned from this agent. The absence of row data for a given index value for dellNetBgpM2PathAttrIndex indicates a lack of such unknown attribute information for the indicated network path (as indexed by that dellNetBgpM2PathAttrIndex value in the dellNetBgpM2PathAttrTable).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2PathAttrUnknownEntry

dellNetBgpM2PathAttrUnknownEntry 1.3.6.1.4.1.6027.20.1.3.7.1
Information about an unknown attribute provided with a path to a network.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2PathAttrUnknownEntry  

dellNetBgpM2PathAttrUnknownIndex 1.3.6.1.4.1.6027.20.1.3.7.1.1
An integer index for a row in this table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dellNetBgpM2PathAttrUnknownType 1.3.6.1.4.1.6027.20.1.3.7.1.2
The attribute type advertised with this unknown attribute by the peer.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dellNetBgpM2PathAttrUnknownValue 1.3.6.1.4.1.6027.20.1.3.7.1.3
Value of path attribute not understood by the base BGP-4 document. Octets beyond the maximum size, if any, are not recorded by this row object.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..4070)  

dellNetBgpM2PathAttrExtensions 1.3.6.1.4.1.6027.20.1.3.8
OBJECT IDENTIFIER    

dellNetBgpM2PathAttrNonCapExts 1.3.6.1.4.1.6027.20.1.3.8.1
OBJECT IDENTIFIER    

dellNetBgpM2PathAttrCapExts 1.3.6.1.4.1.6027.20.1.3.8.2
OBJECT IDENTIFIER    

dellNetBgpM2PathAttrRouteReflectionExts 1.3.6.1.4.1.6027.20.1.3.8.1.2796
OBJECT IDENTIFIER    

dellNetBgpM2PathAttrOriginatorIdTable 1.3.6.1.4.1.6027.20.1.3.8.1.2796.1
Per prefix data pertinent to advertisement of a network prefix through an originator.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2PathAttrOriginatorIdEntry

dellNetBgpM2PathAttrOriginatorIdEntry 1.3.6.1.4.1.6027.20.1.3.8.1.2796.1.1
Each entry contains data pertinent to a network prefix as received through its originating BGP route reflector.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2PathAttrOriginatorIdEntry  

dellNetBgpM2PathAttrOriginatorId 1.3.6.1.4.1.6027.20.1.3.8.1.2796.1.1.1
The Originator-ID identifying the router that initially advertised this destination to a Route Reflector. A value of 0.0.0.0 indicates the absence of this attribute.
Status: current Access: read-only
OBJECT-TYPE    
  DellNetBgpM2Identifier  

dellNetBgpM2PathAttrClusterTable 1.3.6.1.4.1.6027.20.1.3.8.1.2796.2
The BGP-4 Path Attribute Cluster Table contains the per network path (NLRI) data on the reflection path which a route has traversed. The absence of row data for a given index value for dellNetBgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that dellNetBgpM2PathAttrIndex value in the dellNetBgpM2PathAttrTable).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2PathAttrClusterEntry

dellNetBgpM2PathAttrClusterEntry 1.3.6.1.4.1.6027.20.1.3.8.1.2796.2.1
Information about a cluster traversal provided with a path to a network.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2PathAttrClusterEntry  

dellNetBgpM2PathAttrClusterIndex 1.3.6.1.4.1.6027.20.1.3.8.1.2796.2.1.1
An integral index for a row in this table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dellNetBgpM2PathAttrClusterValue 1.3.6.1.4.1.6027.20.1.3.8.1.2796.2.1.2
A four octet long value representing a part of the reflection path that the route has passed. Each such four octet long value represents the ID of a cluster that the route has traversed. The sequence of this path as received in the route advertisement will be preserved in the sequence of dellNetBgpM2PathAttrClusterTable rows (and the dellNetBgpM2PathAttrClusterValues in each row) as returned for a given dellNetBgpM2PathAttrIndex value, and the monotonically increasing sequence of dellNetBgpM2PathAttrClusterIndex values for that dellNetBgpM2PathAttrIndex.
Status: current Access: read-only
OBJECT-TYPE    
  DellNetBgpM2Identifier  

dellNetBgpM2PathAttrCommunityExts 1.3.6.1.4.1.6027.20.1.3.8.1.1997
OBJECT IDENTIFIER    

dellNetBgpM2PathAttrCommTable 1.3.6.1.4.1.6027.20.1.3.8.1.1997.1
The BGP-4 Path Attribute Community Table contains the per network path (NLRI) data on the community membership advertised with a route. The absence of row data for a given index value for dellNetBgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that dellNetBgpM2PathAttrIndex value in the dellNetBgpM2PathAttrTable).
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2PathAttrCommEntry

dellNetBgpM2PathAttrCommEntry 1.3.6.1.4.1.6027.20.1.3.8.1.1997.1.1
Information about a community association provided with a path to a network.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2PathAttrCommEntry  

dellNetBgpM2PathAttrCommIndex 1.3.6.1.4.1.6027.20.1.3.8.1.1997.1.1.1
An integer index for a row in this table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dellNetBgpM2PathAttrCommValue 1.3.6.1.4.1.6027.20.1.3.8.1.1997.1.1.2
A value representing a community. There are certain 4-octet long values which could be returned in this columnar row data that carry additional semantics.
Status: current Access: read-only
OBJECT-TYPE    
  DellNetBgpM2Community  

dellNetBgpM2PathAttrExtCommTable 1.3.6.1.4.1.6027.20.1.3.8.1.3501
The BGP-4 Path Attribute Community Table contains the per network path (NLRI) data on the extended community membership advertised with a route. The absence of row data for a given index value for dellNetBgpM2PathAttrIndex indicates a lack of this attribute information for the indicated network path (as indexed by that dellNetBgpM2PathAttrIndex value in the dellNetBgpM2PathAttrTable). XXX JMH - can not assign the OID until an RFC is published.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2PathAttrExtCommEntry

dellNetBgpM2PathAttrExtCommEntry 1.3.6.1.4.1.6027.20.1.3.8.1.3501.1
Information about an extended community association provided with a path to a network.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2PathAttrExtCommEntry  

dellNetBgpM2PathAttrExtCommIndex 1.3.6.1.4.1.6027.20.1.3.8.1.3501.1.1
An integral index for a row in this table.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

dellNetBgpM2PathAttrExtCommValue 1.3.6.1.4.1.6027.20.1.3.8.1.3501.1.2
A value representing an extended community which was received with the route implied by the dellNetBgpM2PathAttr Index value of this row data. There are certain 8-octet long values which could be returned in this columnar row data that carry additional semantics.
Status: current Access: read-only
OBJECT-TYPE    
  DellNetBgpM2ExtendedCommunity  

dellNetBgpM2LinkLocalNextHopTable 1.3.6.1.4.1.6027.20.1.3.8.1.2545
Table of link local nexthops as sent by RFC 2545 for IPv6 BGP Speakers.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DellNetBgpM2LinkLocalNextHopEntry

dellNetBgpM2LinkLocalNextHopEntry 1.3.6.1.4.1.6027.20.1.3.8.1.2545.1
Entry containing the link-local nexthops as sent by a BGP speaker running RFC 2545 extensions for double-nexthops.
Status: current Access: not-accessible
OBJECT-TYPE    
  DellNetBgpM2LinkLocalNextHopEntry  

dellNetBgpM2LinkLocalNextHopPresent 1.3.6.1.4.1.6027.20.1.3.8.1.2545.1.1
This value is TRUE if and only if the BGP speaker is receiving IPv6 NLRI using the RFC 2545 double nexthop convention and it has received a link local scope nexthop in addition to the global scope nexthop.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

dellNetBgpM2LinkLocalNextHop 1.3.6.1.4.1.6027.20.1.3.8.1.2545.1.2
This value contains an IPv6 link local address of InetAddressType of type ipv6z. This value is only present if dellNetBgpM2LinkLocalNextHopPresent is true.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(20)  

dellNetBgpM2Conformance 1.3.6.1.4.1.6027.20.1.4
OBJECT IDENTIFIER    

dellNetBgpM2MIBCompliances 1.3.6.1.4.1.6027.20.1.4.1
OBJECT IDENTIFIER    

dellNetBgpM2MIBGroups 1.3.6.1.4.1.6027.20.1.4.2
OBJECT IDENTIFIER    

dellNetBgpM2MIBCompliance 1.3.6.1.4.1.6027.20.1.4.1.1
The compliance statement for entities which implement the BGP4 mib.
Status: current Access: read-only
MODULE-COMPLIANCE    

dellNetBgpM2CommunitiesGroup 1.3.6.1.4.1.6027.20.1.4.2.1
Objects associated with BGP communities.
Status: current Access: read-only
OBJECT-GROUP    

dellNetBgpM2ExtCommunitiesGroup 1.3.6.1.4.1.6027.20.1.4.2.2
Objects associated with BGP extended communities.
Status: current Access: read-only
OBJECT-GROUP    

dellNetBgpM2RouteReflectionGroup 1.3.6.1.4.1.6027.20.1.4.2.3
Objects associated with BGP route reflection.
Status: current Access: read-only
OBJECT-GROUP    

dellNetBgpM2AsConfederationGroup 1.3.6.1.4.1.6027.20.1.4.2.4
Objects associated with BGP confederation membership.
Status: current Access: read-only
OBJECT-GROUP    

dellNetBgpM2TimersGroup 1.3.6.1.4.1.6027.20.1.4.2.5
Objects associated with BGP peering timers.
Status: current Access: read-only
OBJECT-GROUP    

dellNetBgpM2CountersGroup 1.3.6.1.4.1.6027.20.1.4.2.6
Objects to count discrete events and exchanges on BGP sessions.
Status: current Access: read-only
OBJECT-GROUP    

dellNetBgpM2CapabilitiesGroup 1.3.6.1.4.1.6027.20.1.4.2.7
Objects to report capabilities as received on BGP sessions.
Status: current Access: read-only
OBJECT-GROUP    

dellNetBgpM2AsPathGroup 1.3.6.1.4.1.6027.20.1.4.2.8
Objects to report AS paths received on BGP NLRIs.
Status: current Access: read-only
OBJECT-GROUP    

dellNetBgpM2As4byteGroup 1.3.6.1.4.1.6027.20.1.4.2.9
AS Size objects.
Status: current Access: read-only
OBJECT-GROUP    

dellNetBgpM2BaseGroup 1.3.6.1.4.1.6027.20.1.4.2.10
Basic objects in local BGP implementation.
Status: current Access: read-only
OBJECT-GROUP    

dellNetBgpM2ErrorsGroup 1.3.6.1.4.1.6027.20.1.4.2.11
Errors received on BGP peering sessions.
Status: current Access: read-only
OBJECT-GROUP    

dellNetBgpM2PeerGroup 1.3.6.1.4.1.6027.20.1.4.2.12
Core object types on BGP peering sessions.
Status: current Access: read-only
OBJECT-GROUP    

dellNetBgpM2PathAttributesGroup 1.3.6.1.4.1.6027.20.1.4.2.13
Attributes received on BGP peering sessions.
Status: current Access: read-only
OBJECT-GROUP    

dellNetBgpM2PeerConfigurationGroup 1.3.6.1.4.1.6027.20.1.4.2.14
Configuration objects for BGP peers.
Status: current Access: read-only
OBJECT-GROUP    

dellNetBgpM2PeerRouteReflectorCfgGroup 1.3.6.1.4.1.6027.20.1.4.2.15
Configuration objects for BGP peers that support route reflection.
Status: current Access: read-only
OBJECT-GROUP    

dellNetBgpM2PeerAsConfederationCfgGroup 1.3.6.1.4.1.6027.20.1.4.2.16
Configuration objects for BGP peers that support BGP confederations.
Status: current Access: read-only
OBJECT-GROUP    

dellNetBgpM2MIBNotificationsGroup 1.3.6.1.4.1.6027.20.1.4.2.17
This group contains objects for notifications supported by this mib module.
Status: current Access: read-only
NOTIFICATION-GROUP    

dellNetBgpM2Rfc2545Group 1.3.6.1.4.1.6027.20.1.4.2.18
This group is required for peers that support exchanging of IPv6 NLRI per RFC 2545.
Status: current Access: read-only
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor