D5-MIB

File: D5-MIB.mib (22805 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
RFC-1215

Imported symbols

enterprises IpAddress Counter
OBJECT-TYPE snmp sysUpTime
ifIndex sysDescr ipAdEntAddr
TRAP-TYPE

Defined Types

DisplayString  
OCTET STRING    

CallDataActvEntry  
SEQUENCE    
  callDataActvIndex INTEGER
  callDataActvReqTime DisplayString
  callDataActvEstTime DisplayString
  callDataActvCurrTime DisplayString
  callDataActvSourceSys DisplayString
  callDataActvDestSys DisplayString
  callDataActvPhoneNum DisplayString
  callDataActvBandwidth INTEGER
  callDataActvStatus INTEGER

CallDataCompEntry  
SEQUENCE    
  callDataCompIndex INTEGER
  callDataCompReqTime DisplayString
  callDataCompEstTime DisplayString
  callDataCompRelTime DisplayString
  callDataCompSourceSys DisplayString
  callDataCompDestSys DisplayString
  callDataCompPhoneNum DisplayString
  callDataCompBandwidth INTEGER
  callDataCompStatus INTEGER

D5PortStatsEntry  
SEQUENCE    
  d5StatsPortIndex INTEGER
  d5StatsPortPacketsIn Counter
  d5StatsPortPacketsOut Counter
  d5StatsPortPPSIn INTEGER
  d5StatsPortPPSOut INTEGER
  d5StatsPortBPSIn INTEGER
  d5StatsPortBPSOut INTEGER

D5SystemStatsEntry  
SEQUENCE    
  d5SystemStatsIndex INTEGER
  d5SystemStatsCount Counter

Defined Values

symplex 1.3.6.1.4.1.385
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.385.1
OBJECT IDENTIFIER    

datamizerHseries 1.3.6.1.4.1.385.1.1
OBJECT IDENTIFIER    

directrouteSeries 1.3.6.1.4.1.385.1.2
OBJECT IDENTIFIER    

directroute4Series 1.3.6.1.4.1.385.1.3
OBJECT IDENTIFIER    

datamizerVseries 1.3.6.1.4.1.385.1.4
OBJECT IDENTIFIER    

drcalldata 1.3.6.1.4.1.385.1.4.1
OBJECT IDENTIFIER    

callDataTrapAddr 1.3.6.1.4.1.385.1.4.1.1
The IP address of the device to which Call Data traps will be sent. Set to 0.0.0.0 to disable Call Data traps.
OBJECT-TYPE    
  IpAddress  

callDataTotalActiveCalls 1.3.6.1.4.1.385.1.4.1.2
The total number of currently active calls.
OBJECT-TYPE    
  INTEGER  

callDataActvTable 1.3.6.1.4.1.385.1.4.1.3
A list of active call entries.
OBJECT-TYPE    
  SEQUENCE OF  
    CallDataActvEntry

callDataActvEntry 1.3.6.1.4.1.385.1.4.1.3.1
Tok_String
OBJECT-TYPE    
  CallDataActvEntry  

callDataActvIndex 1.3.6.1.4.1.385.1.4.1.3.1.1
The index of this call event in the callDataTable.
OBJECT-TYPE    
  INTEGER  

callDataActvReqTime 1.3.6.1.4.1.385.1.4.1.3.1.2
The time that this call was initiated.
OBJECT-TYPE    
  DisplayString  

callDataActvEstTime 1.3.6.1.4.1.385.1.4.1.3.1.3
The time that this call connected to the remote system.
OBJECT-TYPE    
  DisplayString  

callDataActvCurrTime 1.3.6.1.4.1.385.1.4.1.3.1.4
This field will return the current timestamp.
OBJECT-TYPE    
  DisplayString  

callDataActvSourceSys 1.3.6.1.4.1.385.1.4.1.3.1.5
The System Name of the unit making the call.
OBJECT-TYPE    
  DisplayString  

callDataActvDestSys 1.3.6.1.4.1.385.1.4.1.3.1.6
The System Name of the unit being called.
OBJECT-TYPE    
  DisplayString  

callDataActvPhoneNum 1.3.6.1.4.1.385.1.4.1.3.1.7
The Phone Number used when the call was placed.
OBJECT-TYPE    
  DisplayString  

callDataActvBandwidth 1.3.6.1.4.1.385.1.4.1.3.1.8
The speed in bps used for the connection.
OBJECT-TYPE    
  INTEGER  

callDataActvStatus 1.3.6.1.4.1.385.1.4.1.3.1.9
The current status of the call. (call active, call failed, etc.)
OBJECT-TYPE    
  INTEGER inactive(1), requested(2), active(3), complete(4), failed(5)  

callDataCompTable 1.3.6.1.4.1.385.1.4.1.4
A list of completed call entries.
OBJECT-TYPE    
  SEQUENCE OF  
    CallDataCompEntry

callDataCompEntry 1.3.6.1.4.1.385.1.4.1.4.1
Tok_String
OBJECT-TYPE    
  CallDataCompEntry  

callDataCompIndex 1.3.6.1.4.1.385.1.4.1.4.1.1
The index of this call event in the callDataTable.
OBJECT-TYPE    
  INTEGER  

callDataCompReqTime 1.3.6.1.4.1.385.1.4.1.4.1.2
The time that this call was initiated.
OBJECT-TYPE    
  DisplayString  

callDataCompEstTime 1.3.6.1.4.1.385.1.4.1.4.1.3
The time that this call connected to the remote system.
OBJECT-TYPE    
  DisplayString  

callDataCompRelTime 1.3.6.1.4.1.385.1.4.1.4.1.4
The time that an established call released, or a requested call was marked as failing.
OBJECT-TYPE    
  DisplayString  

callDataCompSourceSys 1.3.6.1.4.1.385.1.4.1.4.1.5
The System Name of the unit making the call.
OBJECT-TYPE    
  DisplayString  

callDataCompDestSys 1.3.6.1.4.1.385.1.4.1.4.1.6
The System Name of the unit being called.
OBJECT-TYPE    
  DisplayString  

callDataCompPhoneNum 1.3.6.1.4.1.385.1.4.1.4.1.7
The Phone Number used when the call was placed.
OBJECT-TYPE    
  DisplayString  

callDataCompBandwidth 1.3.6.1.4.1.385.1.4.1.4.1.8
The speed in bps used for the connection.
OBJECT-TYPE    
  INTEGER  

callDataCompStatus 1.3.6.1.4.1.385.1.4.1.4.1.9
The current status of the call. (call active, call failed, etc.)
OBJECT-TYPE    
  INTEGER inactive(1), requested(2), active(3), complete(4), failed(5)  

d5system 1.3.6.1.4.1.385.1.4.2
OBJECT IDENTIFIER    

drProdType 1.3.6.1.4.1.385.1.4.2.1
The type of product.
OBJECT-TYPE    
  INTEGER datamizer-5(1)  

drSoftVersion 1.3.6.1.4.1.385.1.4.2.2
The Software version.
OBJECT-TYPE    
  DisplayString  

d5stats 1.3.6.1.4.1.385.1.4.3
OBJECT IDENTIFIER    

d5PortStatsTable 1.3.6.1.4.1.385.1.4.3.1
A list of statistics collected for each Datamizer V port.
OBJECT-TYPE    
  SEQUENCE OF  
    D5PortStatsEntry

d5PortStatsEntry 1.3.6.1.4.1.385.1.4.3.1.1
Tok_String
OBJECT-TYPE    
  D5PortStatsEntry  

d5StatsPortIndex 1.3.6.1.4.1.385.1.4.3.1.1.1
The index of this port in the d5StatsTable.
OBJECT-TYPE    
  INTEGER briA(1), briB(2), briC(3), briD(4), lanE(5), serialHostF(6), serialTrunkG(7)  

d5StatsPortPacketsIn 1.3.6.1.4.1.385.1.4.3.1.1.2
Raw count of incoming packets received on this port since power-up.
OBJECT-TYPE    
  Counter  

d5StatsPortPacketsOut 1.3.6.1.4.1.385.1.4.3.1.1.3
Raw count of outgoing packets transmitted on this port since power-up.
OBJECT-TYPE    
  Counter  

d5StatsPortPPSIn 1.3.6.1.4.1.385.1.4.3.1.1.4
Received packets per second averaged over a configured interval.
OBJECT-TYPE    
  INTEGER  

d5StatsPortPPSOut 1.3.6.1.4.1.385.1.4.3.1.1.5
Transmitted packets per second averaged over a configured interval.
OBJECT-TYPE    
  INTEGER  

d5StatsPortBPSIn 1.3.6.1.4.1.385.1.4.3.1.1.6
Received bits per second averaged over a configured interval.
OBJECT-TYPE    
  INTEGER  

d5StatsPortBPSOut 1.3.6.1.4.1.385.1.4.3.1.1.7
Transmitted bits per second averaged over a configured interval.
OBJECT-TYPE    
  INTEGER  

d5PortStatsInterval 1.3.6.1.4.1.385.1.4.3.2
The length of time over which the preceding stats are averaged.
OBJECT-TYPE    
  INTEGER one-minute(1), fifteen-minutes(2), thirty-minutes(3), sixty-minutes(4)  

d5SystemStatsTable 1.3.6.1.4.1.385.1.4.3.3
A list of events collected for this Datamizer V unit.
OBJECT-TYPE    
  SEQUENCE OF  
    D5SystemStatsEntry

d5SystemStatsEntry 1.3.6.1.4.1.385.1.4.3.3.1
Tok_String
OBJECT-TYPE    
  D5SystemStatsEntry  

d5SystemStatsIndex 1.3.6.1.4.1.385.1.4.3.3.1.1
The index of this type of event in the d5SystemStatsTable.
OBJECT-TYPE    
  INTEGER wanDataErrors(1), serialHostDataErrors(2), lanDataErrors(3), congestionDetection(4)  

d5SystemStatsCount 1.3.6.1.4.1.385.1.4.3.3.1.2
Raw count of events of this type detected since power-up.
OBJECT-TYPE    
  Counter  

coldStart 0
A coldStart trap signifies that the sending protocol entity is reinitializing itself such that the agent's configuration or the protocol entity implementation may be altered.
TRAP-TYPE    

warmStart 1
A warmStart trap signifies that the sending protocol entity is reinitializing itself such that neither the agent configuration nor the protocol entity implementation is altered.
TRAP-TYPE    

linkDown 2
A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration.
TRAP-TYPE    

linkUp 3
A linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up.
TRAP-TYPE    

authenticationFailure 4
An authenticationFailure trap signifies that the sending protocol entity is the addressee of a protocol message that is not properly authenticated. While implementations of the SNMP must be capable of generating this trap, they must also be capable of suppressing the emission of such traps via an implementation- specific mechanism.
TRAP-TYPE    

egpNeighborLoss 5
An egpNeighborLoss trap signifies that an EGP neighbor for whom the sending protocol entity was an EGP peer has been marked down and the peer relationship no longer obtains.
TRAP-TYPE    

unspecifiedTrap 1
An alarm condition has occured within the unit. This trap's text will provide details on the alarm.
TRAP-TYPE    

startDisasterRecovery 2
A startDisasterRecovery trap signifies that the normal external path to a remote site has been lost, and an ISDN connection to that site will be made.
TRAP-TYPE    

stopDisasterRecovery 3
A stopDisasterRecovery trap signifies that the normal external path to a remote site has been recovered, any ISDN connections to that site will be terminated.
TRAP-TYPE    

noBChannel 4
A noBChannel trap signifies that the desired call to a remote site using a phone number was unsuccessful, this phone number has now been disabled.
TRAP-TYPE    

dailyConnLimit 5
A dailyConnLimit trap signifies that the cummulative connect time for originated calls to a remote site has been exceeded. No additional calls can be placed to this site until the next day; unless the administrator intervenes.
TRAP-TYPE    

monthlyConnLimit 6
A monthlyConnLimit trap signifies that the cummulative connect time for originated calls to a remote site has been exceeded. No additional calls can be placed to this site until the next month; unless the administrator intervenes.
TRAP-TYPE    

dataErrorBChannel 7
A dataErrorBChannel trap signifies that the data received on a trunk has been received in error.
TRAP-TYPE    

pppVersion 8
A pppVersion trap signifies that the PPP/LCP versions used by this unit and its peer are incompatible.
TRAP-TYPE    

ipTableFull 9
An ipTableFull trap signifies that the IP Address Table is full and another entry cannot be made at this time.
TRAP-TYPE    

macTableFull 10
A macTableFull trap signifies that the MAC Address Table is full and another entry cannot be made at this time.
TRAP-TYPE    

routeTableFull 11
A routeTableFull trap signifies that either the IP RIP, IPX RIP, or IPX SAP Table is full and another entry cannot be made at this time.
TRAP-TYPE    

duplicateItem 12
A duplicateItem trap signifies that some protocol entity (such as an IPX Network) has been discovered at two sites.
TRAP-TYPE    

noDChannel 13
A noDChannel trap signifies that the D channel connection to the switch for a port cannot be made.
TRAP-TYPE    

lostDedicated 14
A lostDedicated trap signifies that the dedicated trunk connection has been lost.
TRAP-TYPE    

compCallData 15
A compCallData trap signifies that the Completed Call records need to be retrieved from the unit.
TRAP-TYPE