CROUTE-MIB

File: CROUTE-MIB.mib (81586 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
GEN-MIB RMON-MIB

Imported symbols

IpAddress OBJECT-TYPE PhysAddress
DisplayString lannet OwnerString

Defined Types

RowStatus  
INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)    

NetNum  
INTEGER    

IpInterfaceEntry  
SEQUENCE    
  ipInterfaceAddr IpAddress
  ipInterfaceNetMask IpAddress
  ipInterfaceLowerIfAlias DisplayString
  ipInterfaceType INTEGER
  ipInterfaceForwardIpBroadcast INTEGER
  ipInterfaceBroadcastAddr INTEGER
  ipInterfaceProxyArp INTEGER
  ipInterfaceStatus RowStatus
  ipInterfaceMainRouterAddr IpAddress
  ipInterfaceARPServerStatus INTEGER
  ipInterfaceName DisplayString
  ipInterfaceNetbiosRebroadcast INTEGER
  ipInterfaceIcmpRedirects INTEGER

RipInterfaceEntry  
SEQUENCE    
  ripInterfaceAddr IpAddress
  ripInterfaceMetric INTEGER
  ripInterfaceSplitHorizon INTEGER
  ripInterfaceAcceptDefaultRoute INTEGER
  ripInterfaceSendDefaultRoute INTEGER
  ripInterfaceState INTEGER
  ripInterfaceSendMode INTEGER
  ripInterfaceVersion INTEGER

RelayEntry  
SEQUENCE    
  relayVlIndex INTEGER
  relayVlPrimaryServerAddr IpAddress
  relayVlSeconderyServerAddr IpAddress
  relayVlStatus RowStatus
  relayVlRelayAddr IpAddress

IpAccessControlEntry  
SEQUENCE    
  ipAccessControlIndex INTEGER
  ipAccessControlSrcAddr IpAddress
  ipAccessControlSrcMask IpAddress
  ipAccessControlDstAddr IpAddress
  ipAccessControlDstMask IpAddress
  ipAccessControlOperation INTEGER
  ipAccessControlActivation INTEGER
  ipAccessControlProtocol INTEGER
  ipAccessControlApplication INTEGER
  ipAccessControlStatus RowStatus

IpMulticastInterfaceEntry  
SEQUENCE    
  ipMulticastInterfaceIfIndex INTEGER
  ipMulticastInterfaceSendAll INTEGER
  ipMulticastInterfaceState INTEGER
  ipMulticastInterfaceStatus RowStatus

IpEZ2BoostRouterEntry  
SEQUENCE    
  ipEZ2BoostRouterSlot INTEGER
  ipEZ2BoostRouterBRAddress IpAddress
  ipEZ2BoostRouterType INTEGER
  ipEZ2BoostRouterStatus RowStatus

IpEZ2RControlEntry  
SEQUENCE    
  ipEZ2RControlSlot INTEGER
  ipEZ2RControlBoostedRoutersTimeout INTEGER
  ipEZ2RControlHostsTimeout INTEGER
  ipEZ2RControlAutoLearnMode INTEGER

IpxCircEntry  
SEQUENCE    
  ipxCircIndex INTEGER
  ipxCircNetNumber NetNum
  ipxCircLowerIfAlias DisplayString
  ipxCircEncapsulation INTEGER
  ipxCircNetbios INTEGER
  ipxCircStatus RowStatus
  ipxCircRipStatus INTEGER
  ipxCircRipUpdate INTEGER
  ipxCircRipAgeMultiplier INTEGER
  ipxCircSapUpdate INTEGER
  ipxCircSapAgeMultiplier INTEGER
  ipxCircGetNearestServerReply INTEGER
  ipxCircSapStatus INTEGER
  ipxCircRipState INTEGER
  ipxCircSapState INTEGER

IpxDestEntry  
SEQUENCE    
  ipxDestNetNum NetNum
  ipxDestProtocol INTEGER
  ipxDestTicks INTEGER
  ipxDestHopCount INTEGER
  ipxDestNextHopCircIndex INTEGER
  ipxDestNextHopNICAddress PhysAddress
  ipxDestNextHopNetNum NetNum
  ipxDestStatus RowStatus
  ipxDestAge INTEGER

IpxServEntry  
SEQUENCE    
  ipxServType INTEGER
  ipxServName DisplayString
  ipxServProtocol INTEGER
  ipxServNetNum NetNum
  ipxServNode OCTET STRING
  ipxServSocket INTEGER
  ipxServHopCount INTEGER
  ipxServStatus RowStatus
  ipxServAge INTEGER

IpxAccessControlEntry  
SEQUENCE    
  ipxAccessControlIndex INTEGER
  ipxAccessControlSrcAddr NetNum
  ipxAccessControlDstAddr NetNum
  ipxAccessControlOperation INTEGER
  ipxAccessControlActivation INTEGER
  ipxAccessControlStatus RowStatus

IpxSapFilterEntry  
SEQUENCE    
  ipxSapFilterID INTEGER
  ipxSapFilterCircIndex INTEGER
  ipxSapFilterServiceNetNumber NetNum
  ipxSapFilterServiceType INTEGER
  ipxSapFilterServerName DisplayString Size(1..48)
  ipxSapFilterDirection INTEGER
  ipxSapFilterAction INTEGER
  ipxSapFilterStatus RowStatus

VlConfEntry  
SEQUENCE    
  vlConfIndex INTEGER
  vlConfAlias DisplayString
  vlConfStatus RowStatus

VlBridgeEntry  
SEQUENCE    
  vlBridgeProtocol INTEGER
  vlBridgeGroupIndex INTEGER
  vlBridgeIndex INTEGER
  vlBridgeStatus RowStatus

RouteGroupEntry  
SEQUENCE    
  routeGroupId INTEGER
  routeGroupRouteMode INTEGER

DrVlConfEntry  
SEQUENCE    
  drVlConfSlot INTEGER
  drVlConfIndex INTEGER
  drVlConfAlias DisplayString
  drVlConfStatus RowStatus

DrIpInterfaceEntry  
SEQUENCE    
  drIpInterfaceSlot INTEGER
  drIpInterfaceAddr IpAddress
  drIpInterfaceNetMask IpAddress
  drIpInterfaceLowerIfAlias DisplayString
  drIpInterfaceType INTEGER
  drIpInterfaceForwardIpBroadcast INTEGER
  drIpInterfaceBroadcastAddr INTEGER
  drIpInterfaceProxyArp INTEGER
  drIpInterfaceStatus RowStatus
  drIpInterfaceMainRouterAddr IpAddress
  drIpInterfaceARPServerStatus INTEGER
  drIpInterfaceName DisplayString
  drIpInterfaceNetbiosRebroadcast INTEGER
  drIpInterfaceIcmpRedirects INTEGER

DrStaticCidrEntry  
SEQUENCE    
  drStaticCidrEntID INTEGER
  drStaticCidrDest IpAddress
  drStaticCidrMask IpAddress
  drStaticCidrTos INTEGER -2147483648..2147483647
  drStaticCidrNextHop IpAddress
  drStaticCidrIfIndex INTEGER -2147483648..2147483647
  drStaticCidrType INTEGER
  drStaticCidrMetric1 INTEGER -2147483648..2147483647
  drStaticCidrPrecedence INTEGER
  drStaticCidrCRPType INTEGER
  drStaticCidrOperStatus INTEGER
  drStaticCidrName DisplayString
  drStaticOwner OwnerString
  drStaticCidrStatus RowStatus

Defined Values

croute 1.3.6.1.4.1.81.31
OBJECT IDENTIFIER    

ipRoute 1.3.6.1.4.1.81.31.1
OBJECT IDENTIFIER    

ipGlobals 1.3.6.1.4.1.81.31.1.1
OBJECT IDENTIFIER    

ipGlobalsBOOTPRelayStatus 1.3.6.1.4.1.81.31.1.1.1
Whenever to activate the BOOTP Relay protocol on the device. enable - set by the user, means activate the BOOTP Relay protocol over the defined VLANs. disable - set by the user, means don't active the BOOTP Relay protocol. backup - set by the user, means the BOOTP Relay protocol is in stand-by. It will enter to activeBackup mode after IP REDUNDANCY mechanism will enter to active mode. activeBackup - set by the device (status), means the backup BOOTP Relay is working (after time-out of IP REDUNDANCY).
OBJECT-TYPE    
  INTEGER enable(1), disable(2), backup(3), activeBackup(4)  

ipGlobalsICMPErrMsgEnable 1.3.6.1.4.1.81.31.1.1.2
Whenever to send ICMP messages such as Destination Unreachable, etc.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipGlobalsARPInactiveTimeout 1.3.6.1.4.1.81.31.1.1.3
Time-out required to remove inactive ARP entries. The value is in seconds. The default value is 4 hours
OBJECT-TYPE    
  INTEGER  

ipInterfaceTable 1.3.6.1.4.1.81.31.1.2
This table is an extention of MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects.
OBJECT-TYPE    
  SEQUENCE OF  
    IpInterfaceEntry

ipInterfaceEntry 1.3.6.1.4.1.81.31.1.2.1
The information concerning one of this entity's IP interfaces. An IP interface is a logical connection to a certain IP net/subnet.
OBJECT-TYPE    
  IpInterfaceEntry  

ipInterfaceAddr 1.3.6.1.4.1.81.31.1.2.1.1
The IP address to which this entry's addressing information pertains.
OBJECT-TYPE    
  IpAddress  

ipInterfaceNetMask 1.3.6.1.4.1.81.31.1.2.1.2
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
OBJECT-TYPE    
  IpAddress  

ipInterfaceLowerIfAlias 1.3.6.1.4.1.81.31.1.2.1.3
This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and provides a non-volatile 'handle' for the lower-layer interface. The semantics of the object are similar to the semantics of the ifAlias object, defined by the Interfaces MIB. At the time when this Madge MIB object was defined, the latest release of the Interfaces MIB was draft-ietf-ifmib-mib-05.txt. The purpose is to support all methods (static or dynamic) for creation of interfaces and to allow creation of IP table entries without the need of the layer 2 interface to be present on the device at the time of the creation. It is assumed that some implementation dependent mechanisms allow the IP application to be informed about the creation of new lower layer interfaces.
OBJECT-TYPE    
  DisplayString Size(0..16)  

ipInterfaceType 1.3.6.1.4.1.81.31.1.2.1.4
The logical type of the interface. The default depends on the physical type. For example Ethernet and Token-Ring LANs are of type broadcast
OBJECT-TYPE    
  INTEGER broadcast(1), nBMA(2), ptp(3)  

ipInterfaceForwardIpBroadcast 1.3.6.1.4.1.81.31.1.2.1.5
Whether the router forwards IP directed broadcasts that are to be transmitted as link-layer broadcast to an attached net or subnet.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipInterfaceBroadcastAddr 1.3.6.1.4.1.81.31.1.2.1.6
The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
OBJECT-TYPE    
  INTEGER  

ipInterfaceProxyArp 1.3.6.1.4.1.81.31.1.2.1.7
When proxy ARP is enabled, the router responds to ARP requests received on one link-layer interface for an IP-address that is reachable via another link-layer interface. The response provides the router's own MAC address.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipInterfaceStatus 1.3.6.1.4.1.81.31.1.2.1.8
For adding and deleting IP interfaces. Deleting this row means deleting the corresponding entry in IpAddrTable (MIB II). Deleting an IP interface also causes deletion of all static routes defined on this IP interface, as well as protocol interfaces (e.g. RIP and OSPF) defined on this IP interface.
OBJECT-TYPE    
  RowStatus  

ipInterfaceMainRouterAddr 1.3.6.1.4.1.81.31.1.2.1.9
The IP address of the main router backed up on this interface.
OBJECT-TYPE    
  IpAddress  

ipInterfaceARPServerStatus 1.3.6.1.4.1.81.31.1.2.1.10
Whenever to activate the ARP Server mechanism on this interface. enable - set by the user, means activate the ARP Server mechanism over this IP interface. disable - set by the user, means don't active the ARP Server mechanism over this IP interface.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipInterfaceName 1.3.6.1.4.1.81.31.1.2.1.11
The name of this interface for compatibility with cli.
OBJECT-TYPE    
  DisplayString Size(0..32)  

ipInterfaceNetbiosRebroadcast 1.3.6.1.4.1.81.31.1.2.1.12
inbound - netbios received from the interface are rebarodcasted, outbound - netbios are rebraodcasted to this interface, both - netbios are rebroadacsted both from and to this interface, disable - netbios is not rebraodcasted neither from nor to this interface. Currently only both and disable are supported
OBJECT-TYPE    
  INTEGER inbound(1), outbound(2), both(3), disable(4)  

ipInterfaceIcmpRedirects 1.3.6.1.4.1.81.31.1.2.1.13
enable - enable the sending of redirect messages if the router is forced to re-send a packet through the same interface on which it was received. disable - disable the sending of redirect messages on this interface.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ripGlobals 1.3.6.1.4.1.81.31.1.3
OBJECT IDENTIFIER    

ripGlobalsRIPEnable 1.3.6.1.4.1.81.31.1.3.1
Whenever to activate the RIP protocol on the device. disable means don't activate RIP over all the IP interfaces enable means that the status of each interface is relevant
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ripGlobalsLeakOSPFIntoRIP 1.3.6.1.4.1.81.31.1.3.2
Whenever to leak (redistribute) routes learned from OSPF protocol into the domain of the RIP protocol.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ripGlobalsLeakStaticIntoRIP 1.3.6.1.4.1.81.31.1.3.3
Whenever to leak (redistribute) routes learned from Static Route into the domain of the RIP protocol.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ripInterfaceTable 1.3.6.1.4.1.81.31.1.4
This table is an extention of rip2IfConfTable, and is used to add/delete objects entries to/from that table.
OBJECT-TYPE    
  SEQUENCE OF  
    RipInterfaceEntry

ripInterfaceEntry 1.3.6.1.4.1.81.31.1.4.1
The information concerning one of this entity's IP interfaces. An IP interface is a logical connection to a certain IP net/subnet.
OBJECT-TYPE    
  RipInterfaceEntry  

ripInterfaceAddr 1.3.6.1.4.1.81.31.1.4.1.1
The IP address to which this entry's addressing information pertains.
OBJECT-TYPE    
  IpAddress  

ripInterfaceMetric 1.3.6.1.4.1.81.31.1.4.1.2
This variable indicates the number of hops that is to be assign to that interface.
OBJECT-TYPE    
  INTEGER 0..15  

ripInterfaceSplitHorizon 1.3.6.1.4.1.81.31.1.4.1.3
Whether to activate Poison Reverse algorithm, Split Horizon or none of them, on this interface
OBJECT-TYPE    
  INTEGER poisonReverse(1), splitHorizon(2), none(3)  

ripInterfaceAcceptDefaultRoute 1.3.6.1.4.1.81.31.1.4.1.4
Whether to accept the default route from receive RIP message.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ripInterfaceSendDefaultRoute 1.3.6.1.4.1.81.31.1.4.1.5
Whether to send the default route in RIP message.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ripInterfaceState 1.3.6.1.4.1.81.31.1.4.1.6
The operational (current state) of the IP interface from RIP point of view. It depends on Global RIP status, IP interface status and rip interface STATUS. inactive - set by the device (status), the rip is not active on this interface. active - set by the device (status), rip is active on this interface.
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

ripInterfaceSendMode 1.3.6.1.4.1.81.31.1.4.1.7
What the router sends on this interface. All - send the whole routing table according to the RIP version. DefaultOnly - send default route only. DoNotDend - don't send any RIP information on this interface.
OBJECT-TYPE    
  INTEGER all(1), defaultOnly(2), doNotSend(3)  

ripInterfaceVersion 1.3.6.1.4.1.81.31.1.4.1.8
What RIP information the router sends on this interface.
OBJECT-TYPE    
  INTEGER rip1(1), rip2(2)  

ospfGlobals 1.3.6.1.4.1.81.31.1.5
OBJECT IDENTIFIER    

ospfGlobalsLeakRIPIntoOSPF 1.3.6.1.4.1.81.31.1.5.1
Whenever to leak (redistribute) routes learned from RIP protocol into the domain of the OSPF protocol.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ospfGlobalsLeakStaticIntoOSPF 1.3.6.1.4.1.81.31.1.5.2
Whenever to leak (redistribute) routes learned from Static Route into the domain of the OSPF protocol.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ospfGlobalsLeakDirectIntoOSPF 1.3.6.1.4.1.81.31.1.5.3
Whenever to leak (redistribute) routes learned from Direct into the domain of the OSPF protocol.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

relayTable 1.3.6.1.4.1.81.31.1.6
This table is an extention of vlConfTable, and is used to add/delete DHCP Servers to/from that table.
OBJECT-TYPE    
  SEQUENCE OF  
    RelayEntry

relayEntry 1.3.6.1.4.1.81.31.1.6.1
The information concerning one of this entity's VLAN interfaces. An VLAN interface is a virtual connection to a switch.
OBJECT-TYPE    
  RelayEntry  

relayVlIndex 1.3.6.1.4.1.81.31.1.6.1.1
A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
OBJECT-TYPE    
  INTEGER  

relayVlPrimaryServerAddr 1.3.6.1.4.1.81.31.1.6.1.2
The IP address of the primary server, to which the BOOTP/DHCP requests to be sent.
OBJECT-TYPE    
  IpAddress  

relayVlSeconderyServerAddr 1.3.6.1.4.1.81.31.1.6.1.3
The IP address of the secondary server, to which the BOOTP/DHCP requests to be sent.
OBJECT-TYPE    
  IpAddress  

relayVlStatus 1.3.6.1.4.1.81.31.1.6.1.4
For deleting an DHCP/BOOTP servers entry. The entry will be deleted upon deleting the corresponding VLAN
OBJECT-TYPE    
  RowStatus  

relayVlRelayAddr 1.3.6.1.4.1.81.31.1.6.1.5
The IP address of the Relay, i.e. the router's IP address to write in the relayed request (giaddr field in the Bootp packet). When there are multiple IP interfaces on the same VLAN such that the router has multiple IP addresses on the VLAN, the user can configure which of these addresses to use when relaying requests arriving on this VLAN. This relay address is used by the server to determines the subnet from which the address shall be allocated. The special value 255.255.255.255 means DUPLICATE. In this case the Relay will duplicate each request arriving on this VLAN and send to the server multiple copies of the request, a copy for each of the router's IP addresses on that VLAN. The relay address in each copy of the request shall be the router's IP address (NOT 255.255.255.255). The special value 0.0.0.0 means that the router shall use the Default value (lowest IP address on the VLAN) for the relay address
OBJECT-TYPE    
  IpAddress  

ipAccessGlobals 1.3.6.1.4.1.81.31.1.7
OBJECT IDENTIFIER    

ipAccessControlEnable 1.3.6.1.4.1.81.31.1.7.1
Whenever to activate the IP ACCESS CONTROL statements on the device. disable means don't activate IP ACCESS CONTROL over all the IP statements enable means activate IP ACCESS CONTROL over all the IP statements
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipAccessControlTable 1.3.6.1.4.1.81.31.1.8
This table is used to add/delete access control statement to/from that table.
OBJECT-TYPE    
  SEQUENCE OF  
    IpAccessControlEntry

ipAccessControlEntry 1.3.6.1.4.1.81.31.1.8.1
The information concerning one of this entity's IP interfaces. An IP interface is a logical connection to a certain IP net/subnet.
OBJECT-TYPE    
  IpAccessControlEntry  

ipAccessControlIndex 1.3.6.1.4.1.81.31.1.8.1.1
Entry index.
OBJECT-TYPE    
  INTEGER  

ipAccessControlSrcAddr 1.3.6.1.4.1.81.31.1.8.1.2
The IP address of the source address.
OBJECT-TYPE    
  IpAddress  

ipAccessControlSrcMask 1.3.6.1.4.1.81.31.1.8.1.3
The MASK address of the source address.
OBJECT-TYPE    
  IpAddress  

ipAccessControlDstAddr 1.3.6.1.4.1.81.31.1.8.1.4
The IP address of the destination address.
OBJECT-TYPE    
  IpAddress  

ipAccessControlDstMask 1.3.6.1.4.1.81.31.1.8.1.5
The MASK address of the destination address.
OBJECT-TYPE    
  IpAddress  

ipAccessControlOperation 1.3.6.1.4.1.81.31.1.8.1.6
How to operate the IP ACCESS CONTROL statement, on the receiving packet. Forwards the packet, Block (Discard) the packet or block (Discard) the packet and report to the user by sending trap.
OBJECT-TYPE    
  INTEGER forward(1), block(2), blockAndReport(3)  

ipAccessControlActivation 1.3.6.1.4.1.81.31.1.8.1.7
Does the IP ACCESS CONTROL statement done by HW or SW(CPU). HW - wire-speed, SW - regular.
OBJECT-TYPE    
  INTEGER wire-speed(1), regular(2)  

ipAccessControlProtocol 1.3.6.1.4.1.81.31.1.8.1.8
Over which protocol does the IP ACCESS CONTROL statement activate. Icmp, Tcp, Udp. None - means IP addresses only
OBJECT-TYPE    
  INTEGER icmp(1), tcp(6), udp(17), none(256)  

ipAccessControlApplication 1.3.6.1.4.1.81.31.1.8.1.9
Over which application does the IP ACCESS CONTROL statement activate. The exception are: above1023 can work over TCP or UDP, none can't work over TCP or UDP or ICMP only none is excepted
OBJECT-TYPE    
  INTEGER ftp(21), telnet(23), smtp(25), http(80), pop3(110), snmp(161), snmpTrap(162), above1023(65536), none(65537)  

ipAccessControlStatus 1.3.6.1.4.1.81.31.1.8.1.10
For create/delete of a IP ACCESS CONTROL statement.
OBJECT-TYPE    
  RowStatus  

ipRedundancyGlobals 1.3.6.1.4.1.81.31.1.9
OBJECT IDENTIFIER    

ipRedundancyStatus 1.3.6.1.4.1.81.31.1.9.1
Whenever to activate the IP REDUNDANCY mechanism on the device. enable - set by the user, means activate the IP REDUNDANCY mechanism over the defined IP interfaces. disable - set by the user, means don't active the IP REDUNDANCY mechanism over the defined IP interfaces. inactive - set by the device (status), means the backup interface is in stand-by (after enable operation). active - set by the device (status), means the backup interface is working (after time-out).
OBJECT-TYPE    
  INTEGER enable(1), disable(2), inactive(3), active(4)  

ipRedundancyTimeout 1.3.6.1.4.1.81.31.1.9.2
Time-out required to activate the backup process of IP REDUNDANCY. After Time-out the Redundant router assumes that the main (Backuped) router is not operational, and takes control over all defined IP interfaces of the main. The value is in seconds. The default value is 12
OBJECT-TYPE    
  INTEGER  

ipRedundancyPollingInterval 1.3.6.1.4.1.81.31.1.9.3
The polling interval used to poll the Main (Backed up) router. The value is multiply of ipRedundancyTimeout. The value is in seconds. The default value is 3
OBJECT-TYPE    
  INTEGER  

ipShortcutGlobals 1.3.6.1.4.1.81.31.1.10
OBJECT IDENTIFIER    

ipShortcutARPServerStatus 1.3.6.1.4.1.81.31.1.10.1
Whenever to activate the ARP Server mechanism on the device. enable - set by the user, means activate the ARP Server mechanism over the defined IP interfaces. disable - set by the user, means don't active the ARP Server mechanism over the defined IP interfaces.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipMulticastInterfaceTable 1.3.6.1.4.1.81.31.1.11
This table is used to update multicast parameters over interfaces already define
OBJECT-TYPE    
  SEQUENCE OF  
    IpMulticastInterfaceEntry

ipMulticastInterfaceEntry 1.3.6.1.4.1.81.31.1.11.1
The information concerning one of this entity's interfaces.
OBJECT-TYPE    
  IpMulticastInterfaceEntry  

ipMulticastInterfaceIfIndex 1.3.6.1.4.1.81.31.1.11.1.1
A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
OBJECT-TYPE    
  INTEGER  

ipMulticastInterfaceSendAll 1.3.6.1.4.1.81.31.1.11.1.2
The user will be able to configure whenever to send the all Multicast packets to this interface. Enable - Enable the user to define this interface, over all the existing groups Disable - Will acts according to the other parameters.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipMulticastInterfaceState 1.3.6.1.4.1.81.31.1.11.1.3
The current state (operational) of the IP Multicast from IP Multicast point of view. It depends on global ipMRouteEnable status and Multicast interface status. Inactive - set by the device (status), Global IP multicast is disabled or Multicast is disable on this interface. Active - set by the device (status), Global IP multicast is enable and Multicast is active on this interface.
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

ipMulticastInterfaceStatus 1.3.6.1.4.1.81.31.1.11.1.4
For enable/disable of a IP multicast over an interface.
OBJECT-TYPE    
  RowStatus  

ipEZ2RouteMgmt 1.3.6.1.4.1.81.31.1.13
OBJECT IDENTIFIER    

ipEZ2BoostRouterTable 1.3.6.1.4.1.81.31.1.13.1
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    IpEZ2BoostRouterEntry

ipEZ2BoostRouterEntry 1.3.6.1.4.1.81.31.1.13.1.1
Tok_String
OBJECT-TYPE    
  IpEZ2BoostRouterEntry  

ipEZ2BoostRouterSlot 1.3.6.1.4.1.81.31.1.13.1.1.1
Tok_String
OBJECT-TYPE    
  INTEGER  

ipEZ2BoostRouterBRAddress 1.3.6.1.4.1.81.31.1.13.1.1.2
Tok_String
OBJECT-TYPE    
  IpAddress  

ipEZ2BoostRouterType 1.3.6.1.4.1.81.31.1.13.1.1.3
Tok_String
OBJECT-TYPE    
  INTEGER dynamic(1), static(2)  

ipEZ2BoostRouterStatus 1.3.6.1.4.1.81.31.1.13.1.1.4
Tok_String
OBJECT-TYPE    
  RowStatus  

ipEZ2RControlTable 1.3.6.1.4.1.81.31.1.13.2
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    IpEZ2RControlEntry

ipEZ2RControlEntry 1.3.6.1.4.1.81.31.1.13.2.1
Tok_String
OBJECT-TYPE    
  IpEZ2RControlEntry  

ipEZ2RControlSlot 1.3.6.1.4.1.81.31.1.13.2.1.1
Tok_String
OBJECT-TYPE    
  INTEGER  

ipEZ2RControlBoostedRoutersTimeout 1.3.6.1.4.1.81.31.1.13.2.1.2
Set the timeout of EZ2route routers
OBJECT-TYPE    
  INTEGER 5..9999999  

ipEZ2RControlHostsTimeout 1.3.6.1.4.1.81.31.1.13.2.1.3
Set the timeout of EZ2route hosts
OBJECT-TYPE    
  INTEGER 300..9999999  

ipEZ2RControlAutoLearnMode 1.3.6.1.4.1.81.31.1.13.2.1.5
Tok_String
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipVRRP 1.3.6.1.4.1.81.31.1.14
OBJECT IDENTIFIER    

ipVRRPAdminStatus 1.3.6.1.4.1.81.31.1.14.1
Global switch to enable/disable VRRP
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipxRoute 1.3.6.1.4.1.81.31.2
OBJECT IDENTIFIER    

ipxCircTable 1.3.6.1.4.1.81.31.2.1
This table is an extention of Novell mib IpxCircTable, and is used to add/delete entries to/from that table. In addition it contains private objects.
OBJECT-TYPE    
  SEQUENCE OF  
    IpxCircEntry

ipxCircEntry 1.3.6.1.4.1.81.31.2.1.1
The information concerning one of this entity's IPX circuits. An IPX circuit is a logical connection to a certain IPX netNumber.
OBJECT-TYPE    
  IpxCircEntry  

ipxCircIndex 1.3.6.1.4.1.81.31.2.1.1.1
The identifier of this circuit, unique within the instance of IPX. This value may be written only when creating a new entry in the table.
OBJECT-TYPE    
  INTEGER  

ipxCircNetNumber 1.3.6.1.4.1.81.31.2.1.1.2
The IPX network number of this circuit.
OBJECT-TYPE    
  NetNum  

ipxCircLowerIfAlias 1.3.6.1.4.1.81.31.2.1.1.3
This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and provides a non-volatile 'handle' for the lower-layer interface. The semantics of the object are similar to the semantics of the ifAlias object, defined by the Interfaces MIB. At the time when this Madge MIB object was defined, the latest release of the Interfaces MIB was draft-ietf-ifmib-mib-05.txt. The purpose is to support all methods (static or dynamic) for creation of interfaces and to allow creation of IPX table entries without the need of the layer 2 interface to be present on the device at the time of the creation. It is assumed that some implementation dependent mechanisms allow the IPX application to be informed about the creation of new lower layer interfaces.
OBJECT-TYPE    
  DisplayString Size(0..16)  

ipxCircEncapsulation 1.3.6.1.4.1.81.31.2.1.1.4
The media type (encapsulation of layer2) of this circuit.
OBJECT-TYPE    
  INTEGER other(1), novell(2), ethernet(3), llc(4), snap(5)  

ipxCircNetbios 1.3.6.1.4.1.81.31.2.1.1.5
The type of the circuit.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipxCircStatus 1.3.6.1.4.1.81.31.2.1.1.6
For adding and deleting Circuits. Deleting this row means deleting the corresponding entry in ipxCircTable. Deleting a Circuit also causes deletion of all static routes defined on this Circuit, as well as protocol Circuit (e.g. RIP and SAP) defined on this Circuit.
OBJECT-TYPE    
  RowStatus  

ipxCircRipUpdate 1.3.6.1.4.1.81.31.2.1.1.7
The RIP periodic update interval, in seconds.
OBJECT-TYPE    
  INTEGER  

ipxCircRipAgeMultiplier 1.3.6.1.4.1.81.31.2.1.1.8
The holding multiplier for information received in RIP periodic updates.
OBJECT-TYPE    
  INTEGER  

ipxCircRipStatus 1.3.6.1.4.1.81.31.2.1.1.9
Indicates whether RIP information may be sent/received over this circuit. Set by the user
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipxCircSapUpdate 1.3.6.1.4.1.81.31.2.1.1.10
The SAP periodic update interval, in seconds.
OBJECT-TYPE    
  INTEGER  

ipxCircSapAgeMultiplier 1.3.6.1.4.1.81.31.2.1.1.11
The holding multiplier for information received in SAP periodic updates.
OBJECT-TYPE    
  INTEGER  

ipxCircGetNearestServerReply 1.3.6.1.4.1.81.31.2.1.1.12
Indicates whether to respond to SAP get nearest server requests received on this circuit.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipxCircSapStatus 1.3.6.1.4.1.81.31.2.1.1.13
Indicates whether SAP information may be sent/received over this circuit.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipxCircRipState 1.3.6.1.4.1.81.31.2.1.1.14
Indicates whether RIP information may be sent/received over this circuit. Set by the device to reflect the RIP status and the interface status
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

ipxCircSapState 1.3.6.1.4.1.81.31.2.1.1.15
Indicates whether SAP information may be sent/received over this circuit. Set by the device to reflect the SAP status and the interface status
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

ipxDestTable 1.3.6.1.4.1.81.31.2.2
This table replace the Novell mib IpxDestTable, and is used to add/delete entries to/from that table.
OBJECT-TYPE    
  SEQUENCE OF  
    IpxDestEntry

ipxDestEntry 1.3.6.1.4.1.81.31.2.2.1
The information concerning one of this entity's IPX Routes. An IPX service is a logical connection to a certain IPX Server.
OBJECT-TYPE    
  IpxDestEntry  

ipxDestNetNum 1.3.6.1.4.1.81.31.2.2.1.1
The IPX network number portion of the IPX address of the destination.
OBJECT-TYPE    
  NetNum  

ipxDestProtocol 1.3.6.1.4.1.81.31.2.2.1.2
The routing protocol from which knowledge of this destination was obtained.
OBJECT-TYPE    
  INTEGER other(1), local(2), rip(3), nlsp(4), static(5)  

ipxDestTicks 1.3.6.1.4.1.81.31.2.2.1.3
The delay in ticks to reach this destination.
OBJECT-TYPE    
  INTEGER  

ipxDestHopCount 1.3.6.1.4.1.81.31.2.2.1.4
The number of hops necessary to reach the destination.
OBJECT-TYPE    
  INTEGER  

ipxDestNextHopCircIndex 1.3.6.1.4.1.81.31.2.2.1.5
The unique identifier of the circuit, used to reach the next hop.
OBJECT-TYPE    
  INTEGER  

ipxDestNextHopNICAddress 1.3.6.1.4.1.81.31.2.2.1.6
The NIC address of the next hop.
OBJECT-TYPE    
  PhysAddress  

ipxDestNextHopNetNum 1.3.6.1.4.1.81.31.2.2.1.7
The IPX network number of the next hop.
OBJECT-TYPE    
  NetNum  

ipxDestStatus 1.3.6.1.4.1.81.31.2.2.1.8
Tok_String
OBJECT-TYPE    
  RowStatus  

ipxDestAge 1.3.6.1.4.1.81.31.2.2.1.9
The age of the Routing table entry.
OBJECT-TYPE    
  INTEGER  

ipxServTable 1.3.6.1.4.1.81.31.2.3
This table replace the Novell mib IpxServTable, and is used to add/delete entries to/from that table.
OBJECT-TYPE    
  SEQUENCE OF  
    IpxServEntry

ipxServEntry 1.3.6.1.4.1.81.31.2.3.1
The information concerning one of this entity's IPX Services. An IPX service is a logical connection to a certain IPX Server.
OBJECT-TYPE    
  IpxServEntry  

ipxServType 1.3.6.1.4.1.81.31.2.3.1.1
The service type.
OBJECT-TYPE    
  INTEGER  

ipxServName 1.3.6.1.4.1.81.31.2.3.1.2
The server name.
OBJECT-TYPE    
  DisplayString Size(1..48)  

ipxServProtocol 1.3.6.1.4.1.81.31.2.3.1.3
The protocol from which knowledge of this service was obtained.
OBJECT-TYPE    
  INTEGER other(1), local(2), nlsp(4), static(5), sap(6)  

ipxServNetNum 1.3.6.1.4.1.81.31.2.3.1.4
The IPX network number portion of the IPX address of the service.
OBJECT-TYPE    
  NetNum  

ipxServNode 1.3.6.1.4.1.81.31.2.3.1.5
The node portion of the IPX address of the service.
OBJECT-TYPE    
  OCTET STRING Size(6)  

ipxServSocket 1.3.6.1.4.1.81.31.2.3.1.6
The socket portion of the IPX address of the service.
OBJECT-TYPE    
  INTEGER  

ipxServHopCount 1.3.6.1.4.1.81.31.2.3.1.7
The number of hops to the service.
OBJECT-TYPE    
  INTEGER  

ipxServStatus 1.3.6.1.4.1.81.31.2.3.1.8
Tok_String
OBJECT-TYPE    
  RowStatus  

ipxServAge 1.3.6.1.4.1.81.31.2.3.1.9
The age of the SAP entry.
OBJECT-TYPE    
  INTEGER  

ipxAccessGlobals 1.3.6.1.4.1.81.31.2.4
OBJECT IDENTIFIER    

ipxAccessControlEnable 1.3.6.1.4.1.81.31.2.4.1
Whenever to activate the IPX ACCESS CONTROL statements on the device. disable means don't activate IPX ACCESS CONTROL over all the IPX statements enable means activate IPX ACCESS CONTROL over all the IPX statements
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipxAccessControlTable 1.3.6.1.4.1.81.31.2.5
This table is used to add/delete IPX access control statement to/from that table.
OBJECT-TYPE    
  SEQUENCE OF  
    IpxAccessControlEntry

ipxAccessControlEntry 1.3.6.1.4.1.81.31.2.5.1
The information concerning one of this entity's IPX access control statements.
OBJECT-TYPE    
  IpxAccessControlEntry  

ipxAccessControlIndex 1.3.6.1.4.1.81.31.2.5.1.1
Entry index.
OBJECT-TYPE    
  INTEGER  

ipxAccessControlSrcAddr 1.3.6.1.4.1.81.31.2.5.1.2
The IPX network of the source address.
OBJECT-TYPE    
  NetNum  

ipxAccessControlDstAddr 1.3.6.1.4.1.81.31.2.5.1.3
The IPX network of the destination address.
OBJECT-TYPE    
  NetNum  

ipxAccessControlOperation 1.3.6.1.4.1.81.31.2.5.1.4
How to operate the IPX ACCESS CONTROL statement, on the receiving packet. Forwards the packet, Block (Discard) the packet or block (Discard) the packet and report to the user by sending trap.
OBJECT-TYPE    
  INTEGER forward(1), block(2), blockAndReport(3)  

ipxAccessControlActivation 1.3.6.1.4.1.81.31.2.5.1.5
Does the IPX ACCESS CONTROL statement done by HW or SW(CPU). HW - wire-speed, SW - regular.
OBJECT-TYPE    
  INTEGER wire-speed(1), regular(2)  

ipxAccessControlStatus 1.3.6.1.4.1.81.31.2.5.1.6
For create/delete of an IPX ACCESS CONTROL statement.
OBJECT-TYPE    
  RowStatus  

ipxSapFilterGlobals 1.3.6.1.4.1.81.31.2.6
OBJECT IDENTIFIER    

ipxSapFilterEnable 1.3.6.1.4.1.81.31.2.6.1
Whenever to activate the IPX SAP Filters statements on the device. disable means don't activate IPX SAP Filters over all the IPX SAP statements enable means activate IPX SAP Filter over all the IPX SAP statements
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipxSapFilterTable 1.3.6.1.4.1.81.31.2.7
Table of input/output SAP filter according to IPX circuit number.
OBJECT-TYPE    
  SEQUENCE OF  
    IpxSapFilterEntry

ipxSapFilterEntry 1.3.6.1.4.1.81.31.2.7.1
An entry in the SAP filter table
OBJECT-TYPE    
  IpxSapFilterEntry  

ipxSapFilterID 1.3.6.1.4.1.81.31.2.7.1.1
ID of SAP filter.
OBJECT-TYPE    
  INTEGER  

ipxSapFilterCircIndex 1.3.6.1.4.1.81.31.2.7.1.2
.... -- 0xffff means this is a global SAP filter
OBJECT-TYPE    
  INTEGER  

ipxSapFilterServiceNetNumber 1.3.6.1.4.1.81.31.2.7.1.3
Number network of the filtered service. Value 0xFFFFFFFF applies for any network. DEFVAL {0xFFFFFFFF}
OBJECT-TYPE    
  NetNum  

ipxSapFilterServiceType 1.3.6.1.4.1.81.31.2.7.1.4
The type of the service which may be filtered; value 0xFFFF applies for all types of service and it's default DEFVAL {0xFFFF}
OBJECT-TYPE    
  INTEGER  

ipxSapFilterServerName 1.3.6.1.4.1.81.31.2.7.1.5
The name of the service which may be filtered; wildcards (*) may be used in the end of the name. DEFVAL {*}
OBJECT-TYPE    
  DisplayString Size(1..48)  

ipxSapFilterDirection 1.3.6.1.4.1.81.31.2.7.1.6
Type of filter-input or output
OBJECT-TYPE    
  INTEGER input(1), output(2)  

ipxSapFilterAction 1.3.6.1.4.1.81.31.2.7.1.7
Permit/deny receiving/transmitting of SAP entry
OBJECT-TYPE    
  INTEGER permit(1), deny(2)  

ipxSapFilterStatus 1.3.6.1.4.1.81.31.2.7.1.8
....
OBJECT-TYPE    
  RowStatus  

layer2 1.3.6.1.4.1.81.31.3
OBJECT IDENTIFIER    

vlConfTable 1.3.6.1.4.1.81.31.3.1
This table is an extention of MIB II ifTable, and is used to add/delete entries to/from that table. In addition it contains private objects.
OBJECT-TYPE    
  SEQUENCE OF  
    VlConfEntry

vlConfEntry 1.3.6.1.4.1.81.31.3.1.1
The information concerning one of this entity's VLAN interfaces. An VLAN interface is a virtual connection to a switch.
OBJECT-TYPE    
  VlConfEntry  

vlConfIndex 1.3.6.1.4.1.81.31.3.1.1.1
A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
OBJECT-TYPE    
  INTEGER  

vlConfAlias 1.3.6.1.4.1.81.31.3.1.1.2
This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and provides a non-volatile 'handle' for the lower-layer interface. The semantics of the object are similar to the semantics of the ifAlias object, defined by the Interfaces MIB. At the time when this Madge MIB object was defined, the latest release of the Interfaces MIB was draft-ietf-ifmib-mib-05.txt. The purpose is to support all methods (static or dynamic) for creation of interfaces and to allow creation of IP table entries without the need of the layer 2 interface to be present on the device at the time of the creation. It is assumed that some implementation dependent mechanisms allow the IP application to be informed about the creation of new lower layer interfaces.
OBJECT-TYPE    
  DisplayString Size(0..16)  

vlConfStatus 1.3.6.1.4.1.81.31.3.1.1.3
For adding and deleting VLAN interfaces. Deleting this row means deleting the corresponding entry in ifTable (MIB II). Deleting a VLAN interface is allowed only if IP interface is not defined on this VLAN.
OBJECT-TYPE    
  RowStatus  

vlBridgeTable 1.3.6.1.4.1.81.31.3.2
For each Bridge segment an entry of this table specifies a set of VLANs, which it contains.
OBJECT-TYPE    
  SEQUENCE OF  
    VlBridgeEntry

vlBridgeEntry 1.3.6.1.4.1.81.31.3.2.1
A entry of this table specifies a Group of VLANs and VLANs belonging to it
OBJECT-TYPE    
  VlBridgeEntry  

vlBridgeProtocol 1.3.6.1.4.1.81.31.3.2.1.1
The protocol, supported by this VLAN. The meanings of the values are: other: none of the following. This VLAN includes any protocol except the following protocols. It is a bridging VLAN. L2 relies on a third-party router to exchange traffic between nodes on different VLANs of this type. dec : This is a bridging VLAN, L2 relies on a third-party router to exchange traffic between nodes on different DEC VALNs of this type. netBios: This is a Bridging VLAN, L2 relies on a third-party router to exchange traffic between nodes on different NetBIOS VLAN of this type. appleTalk: This is a Bridging VLAN, L2 relies on a third-party router to exchange traffic between nodes on different appleTalk VLAN of this type. value of other(1) always exist
OBJECT-TYPE    
  INTEGER other(1), dec(2), netBios(3), appleTalk(4), sna(5), ipx(6)  

vlBridgeGroupIndex 1.3.6.1.4.1.81.31.3.2.1.2
A logical number, corresponded this group of VLANs
OBJECT-TYPE    
  INTEGER  

vlBridgeIndex 1.3.6.1.4.1.81.31.3.2.1.3
A logical number, corresponded this VLAN. Each VLAN is allowed to participate in ONE group only
OBJECT-TYPE    
  INTEGER  

vlBridgeStatus 1.3.6.1.4.1.81.31.3.2.1.4
It is used to create or delete an entry
OBJECT-TYPE    
  RowStatus  

layer2Globals 1.3.6.1.4.1.81.31.3.3
OBJECT IDENTIFIER    

layer2GlobalsBridgeEnable 1.3.6.1.4.1.81.31.3.3.1
Whenever to activate the Bridge capability on the device. enable - set by the user, means activate the Bridge capability over the defined VLANs. disable - set by the user, means don't active the Bridge capability. backup - set by the user, means the Bridge capability is in stand-by. It will enter to activeBackup mode after IP REDUNDANCY mechanism will enter to active mode. activeBackup - set by the device (status), means the backup Bridge is working (after time-out of IP REDUNDANCY).
OBJECT-TYPE    
  INTEGER enable(1), disable(2), backup(3), activeBackup(4)  

routeGroupMgmt 1.3.6.1.4.1.81.31.4
OBJECT IDENTIFIER    

routeGroupTable 1.3.6.1.4.1.81.31.4.1
Tok_String
OBJECT-TYPE    
  SEQUENCE OF  
    RouteGroupEntry

routeGroupEntry 1.3.6.1.4.1.81.31.4.1.1
Tok_String
OBJECT-TYPE    
  RouteGroupEntry  

routeGroupId 1.3.6.1.4.1.81.31.4.1.1.1
Tok_String
OBJECT-TYPE    
  INTEGER  

routeGroupRouteMode 1.3.6.1.4.1.81.31.4.1.1.2
A bit mask representing the routing mode of the module: bit 0 - L2 switching bit 1 - EZ2Route bit 2 - Router bit 3 - Rich L2 bit 4 - WebSwitch (Load balance, application redirection). Currently, the following values for this bit mask are defined: secondLayer(1) - no routing. Behaves like P333T. ez2route (3) - no configuration is needed. Boosts external routers router (5) - Behaves like third layer switch. routerAndWebSwitch(21) - Perform routing and Load-Balancing or application redirection
OBJECT-TYPE    
  INTEGER secondLayer(1), ez2route(3), router(5), routerAndWebSwitch(21), notSupported(255)  

drLayer2 1.3.6.1.4.1.81.31.5
OBJECT IDENTIFIER    

drVlConfTable 1.3.6.1.4.1.81.31.5.1
This table is an extention of MIB II ifTable, and is used to add/delete entries to/from that table. In addition it contains private objects.
OBJECT-TYPE    
  SEQUENCE OF  
    DrVlConfEntry

drVlConfEntry 1.3.6.1.4.1.81.31.5.1.1
The information concerning one of this entity's VLAN interfaces. An VLAN interface is a virtual connection to a switch.
OBJECT-TYPE    
  DrVlConfEntry  

drVlConfSlot 1.3.6.1.4.1.81.31.5.1.1.1
The slot number of the module
OBJECT-TYPE    
  INTEGER  

drVlConfIndex 1.3.6.1.4.1.81.31.5.1.1.2
A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
OBJECT-TYPE    
  INTEGER  

drVlConfAlias 1.3.6.1.4.1.81.31.5.1.1.3
This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and provides a non-volatile 'handle' for the lower-layer interface. The semantics of the object are similar to the semantics of the ifAlias object, defined by the Interfaces MIB. At the time when this Madge MIB object was defined, the latest release of the Interfaces MIB was draft-ietf-ifmib-mib-05.txt. The purpose is to support all methods (static or dynamic) for creation of interfaces and to allow creation of IP table entries without the need of the layer 2 interface to be present on the device at the time of the creation. It is assumed that some implementation dependent mechanisms allow the IP application to be informed about the creation of new lower layer interfaces.
OBJECT-TYPE    
  DisplayString Size(0..16)  

drVlConfStatus 1.3.6.1.4.1.81.31.5.1.1.4
For adding and deleting VLAN interfaces. Deleting this row means deleting the corresponding entry in ifTable (MIB II). Deleting a VLAN interface is allowed only if IP interface is not defined on this VLAN.
OBJECT-TYPE    
  RowStatus  

drIpRoute 1.3.6.1.4.1.81.31.6
OBJECT IDENTIFIER    

drIpInterfaceTable 1.3.6.1.4.1.81.31.6.1
This table is an extention of MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects.
OBJECT-TYPE    
  SEQUENCE OF  
    DrIpInterfaceEntry

drIpInterfaceEntry 1.3.6.1.4.1.81.31.6.1.1
The information concerning one of this entity's IP interfaces. An IP interface is a logical connection to a certain IP net/subnet.
OBJECT-TYPE    
  DrIpInterfaceEntry  

drIpInterfaceSlot 1.3.6.1.4.1.81.31.6.1.1.1
The slot number of the module
OBJECT-TYPE    
  INTEGER  

drIpInterfaceAddr 1.3.6.1.4.1.81.31.6.1.1.2
The IP address to which this entry's addressing information pertains.
OBJECT-TYPE    
  IpAddress  

drIpInterfaceNetMask 1.3.6.1.4.1.81.31.6.1.1.3
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
OBJECT-TYPE    
  IpAddress  

drIpInterfaceLowerIfAlias 1.3.6.1.4.1.81.31.6.1.1.4
This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and provides a non-volatile 'handle' for the lower-layer interface. The semantics of the object are similar to the semantics of the ifAlias object, defined by the Interfaces MIB. At the time when this Madge MIB object was defined, the latest release of the Interfaces MIB was draft-ietf-ifmib-mib-05.txt. The purpose is to support all methods (static or dynamic) for creation of interfaces and to allow creation of IP table entries without the need of the layer 2 interface to be present on the device at the time of the creation. It is assumed that some implementation dependent mechanisms allow the IP application to be informed about the creation of new lower layer interfaces.
OBJECT-TYPE    
  DisplayString Size(0..16)  

drIpInterfaceType 1.3.6.1.4.1.81.31.6.1.1.5
The logical type of the interface. The default depends on the physical type. For example Ethernet and Token-Ring LANs are of type broadcast
OBJECT-TYPE    
  INTEGER broadcast(1), nBMA(2), ptp(3)  

drIpInterfaceForwardIpBroadcast 1.3.6.1.4.1.81.31.6.1.1.6
Whether the router forwards IP directed broadcasts that are to be transmitted as link-layer broadcast to an attached net or subnet.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

drIpInterfaceBroadcastAddr 1.3.6.1.4.1.81.31.6.1.1.7
The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.
OBJECT-TYPE    
  INTEGER  

drIpInterfaceProxyArp 1.3.6.1.4.1.81.31.6.1.1.8
When proxy ARP is enabled, the router responds to ARP requests received on one link-layer interface for an IP-address that is reachable via another link-layer interface. The response provides the router's own MAC address.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

drIpInterfaceStatus 1.3.6.1.4.1.81.31.6.1.1.9
For adding and deleting IP interfaces. Deleting this row means deleting the corresponding entry in IpAddrTable (MIB II). Deleting an IP interface also causes deletion of all static routes defined on this IP interface, as well as protocol interfaces (e.g. RIP and OSPF) defined on this IP interface.
OBJECT-TYPE    
  RowStatus  

drIpInterfaceMainRouterAddr 1.3.6.1.4.1.81.31.6.1.1.10
The IP address of the main router backed up on this interface.
OBJECT-TYPE    
  IpAddress  

drIpInterfaceARPServerStatus 1.3.6.1.4.1.81.31.6.1.1.11
Whenever to activate the ARP Server mechanism on this interface. enable - set by the user, means activate the ARP Server mechanism over this IP interface. disable - set by the user, means don't active the ARP Server mechanism over this IP interface.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

drIpInterfaceName 1.3.6.1.4.1.81.31.6.1.1.12
The name of this interface for compatibility with cli.
OBJECT-TYPE    
  DisplayString Size(0..32)  

drIpInterfaceNetbiosRebroadcast 1.3.6.1.4.1.81.31.6.1.1.13
inbound - netbios received from the interface are rebarodcasted, outbound - netbios are rebraodcasted to this interface, both - netbios are rebroadacsted both from and to this interface, disable - netbios is not rebraodcasted neither from nor to this interface. Currently only both and disable are supported
OBJECT-TYPE    
  INTEGER inbound(1), outbound(2), both(3), disable(4)  

drIpInterfaceIcmpRedirects 1.3.6.1.4.1.81.31.6.1.1.14
enable - enable the sending of redirect messages if the router is forced to re-send a packet through the same interface on which it was received. disable - disable the sending of redirect messages on this interface.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

drStaticCidr 1.3.6.1.4.1.81.31.7
OBJECT IDENTIFIER    

drStaticCidrTable 1.3.6.1.4.1.81.31.7.1
The static route table for this entity. The table includes all static routes, both active and inactive. Note that inactive static routes are deleted from RFC2096 ipCidrRouteTable; Hence the need for this private table to maintain user configuration about disabled routes. The table also includes the EntID index, to allow for use in a distributed environment.
OBJECT-TYPE    
  SEQUENCE OF  
    DrStaticCidrEntry

drStaticCidrEntry 1.3.6.1.4.1.81.31.7.1.1
A particular route to a particular destina- tion, under a particular policy.
OBJECT-TYPE    
  DrStaticCidrEntry  

drStaticCidrEntID 1.3.6.1.4.1.81.31.7.1.1.1
The Id of the entity for which a set of rows applies. This index is provided as a mean of distributing non-related information on different entities such as physical modules. The value: The module ID (slot number).
OBJECT-TYPE    
  INTEGER 1..65535  

drStaticCidrDest 1.3.6.1.4.1.81.31.7.1.1.2
Equivalent to ipCidrRouteDest. The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the drStaticCidrMask object is not equal to x.
OBJECT-TYPE    
  IpAddress  

drStaticCidrMask 1.3.6.1.4.1.81.31.7.1.1.3
Equivalent to ipCidrRouteMask. Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the drStaticCidrDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the drStaticCidrMask by reference to the IP Ad- dress Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the drStaticCidrDest object is not equal to drStaticCidr- Dest.
OBJECT-TYPE    
  IpAddress  

drStaticCidrTos 1.3.6.1.4.1.81.31.7.1.1.4
Equivalent to ipCidrRouteTos. The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

drStaticCidrNextHop 1.3.6.1.4.1.81.31.7.1.1.5
Equivalent to ipCidrRouteNextHop. On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.
OBJECT-TYPE    
  IpAddress  

drStaticCidrIfIndex 1.3.6.1.4.1.81.31.7.1.1.6
Equivalent to ipCidrRouteIfIndex. The ifIndex value which identifies the local interface through which the next hop of this route should be reached.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

drStaticCidrType 1.3.6.1.4.1.81.31.7.1.1.7
Equivalent to ipCidrRouteType. The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. reject (2) refers to a route which, if matched, discards the message as unreachable. This is used in some protocols as a means of correctly aggregating routes.
OBJECT-TYPE    
  INTEGER other(1), reject(2), local(3), remote(4)  

drStaticCidrMetric1 1.3.6.1.4.1.81.31.7.1.1.8
Equivalent to ipCidrRouteMetric1. The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's drStaticCidrProto value. If this metric is not used, its value should be set to -1.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

drStaticCidrPrecedence 1.3.6.1.4.1.81.31.7.1.1.9
Equivalent to ipCidrRouteMetric5 (our use of it). The precedence of this routing rule, compared to other routes which may have been learned vie other methods. Translates into ipCidrRouteMetric5 in ipCidrRouteTable (RFC2096). Higher values mean lower precedence. The Agent initialize this value as follows: 0 - drStaticCidrCRPType of bridgingFWLB or routingFWLB 250 - drStaticCidrCRPType of regularStatic
OBJECT-TYPE    
  INTEGER 0..255  

drStaticCidrCRPType 1.3.6.1.4.1.81.31.7.1.1.10
The internal type of this static routing entry. routingFWLB - Route to a group of routing Firewallse bridgingFWLB - Route through a group of bridging Firewalls regularStatic - Regular static routes
OBJECT-TYPE    
  INTEGER routingFWLB(1), bridgingFWLB(2), regularStatic(3)  

drStaticCidrOperStatus 1.3.6.1.4.1.81.31.7.1.1.11
The operational status of this route. up - the route is active, and is present in ipCidrRouteTable. down - the route is inactive; it is not present in ipCidrRouteTable.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

drStaticCidrName 1.3.6.1.4.1.81.31.7.1.1.12
A label given to this route by the user. Has no equivalent in ipCidrRouteTable.
OBJECT-TYPE    
  DisplayString Size(0..32)  

drStaticOwner 1.3.6.1.4.1.81.31.7.1.1.13
The user who is responsible for the entry. Management Apps should write: 'user on host' CLI should write:CLI_User on local device
OBJECT-TYPE    
  OwnerString Size(0..80)  

drStaticCidrStatus 1.3.6.1.4.1.81.31.7.1.1.14
Creation, activation, de-activation and deletion of a static route, using the RowStatus convention: active(1), notInService(2) ,notReady(3), createAndGo(4), createAndWait(5), destroy(6). when an entry is placed in the notInService state, the corresponding route is disabled (removed from ipCidrRouteTable)
OBJECT-TYPE    
  RowStatus