CPQKVM-MIB

File: CPQKVM-MIB.mib (37938 bytes)

Imported modules

CPQHOST-MIB RFC1155-SMI RFC-1212
RFC1213-MIB RFC-1215 POLICY-MANAGEMENT-MIB

Imported symbols

compaq Gauge enterprises
TimeTicks IpAddress Counter
NetworkAddress OBJECT-TYPE DisplayString
PhysAddress TRAP-TYPE UTF8String

Defined Values

cpqKvm 1.3.6.1.4.1.232.160
OBJECT IDENTIFIER    

cpqKvmProducts 1.3.6.1.4.1.232.160.1
OBJECT IDENTIFIER    

cpqKvmManagement 1.3.6.1.4.1.232.160.2
OBJECT IDENTIFIER    

cpqKvmTrapObject 1.3.6.1.4.1.232.160.2.6
OBJECT IDENTIFIER    

cpqKvmTrapObjectUserName 1.3.6.1.4.1.232.160.2.6.1
This object is sent in a trap to identify the name of the user for which the trap condition occurred. If the trap condition occurred as a result of activity on the local port (OSD), then the value of this object will be the following string: local port
OBJECT-TYPE    
  UTF8String Size(3..16)  

cpqKvmTrapObjectTargetUserName 1.3.6.1.4.1.232.160.2.6.2
This object is sent in a trap to identify the name of the target user for which a trap condition occurred.
OBJECT-TYPE    
  UTF8String Size(3..16)  

cpqKvmTrapObjectImageType 1.3.6.1.4.1.232.160.2.6.3
This object is sent in a trap to identify the type of software image for which the trap condition occurred.
OBJECT-TYPE    
  UTF8String Size(0..64)  

cpqKvmTrapObjectImageNewVersion 1.3.6.1.4.1.232.160.2.6.4
This object is sent in a trap to identify the version of the new software image the console switch is being upgraded to.
OBJECT-TYPE    
  UTF8String Size(0..32)  

cpqKvmTrapObjectImageCurrentVersion 1.3.6.1.4.1.232.160.2.6.5
This object is sent in a trap to identify the version of the software image that the console switch is currently running.
OBJECT-TYPE    
  UTF8String Size(0..32)  

cpqKvmTrapObjectImageUpgradeResults 1.3.6.1.4.1.232.160.2.6.6
This object is sent in a trap to report the results of a TFTP image upgrade.
OBJECT-TYPE    
  UTF8String Size(0..64)  

cpqKvmTrapObjectSessionIdentifier 1.3.6.1.4.1.232.160.2.6.7
This object is sent in a trap to identify the session for which the trap condition occurred. The value will be the name of a server if the server name is known, otherwise the value will be the connection path to a server. If the value is a connection path it will have the following format: IA i:Channel c Where i is the ID of the interface adapter, and c is the cascade switch channel number (0 if there is no switch in the path).
OBJECT-TYPE    
  UTF8String Size(0..32)  

cpqKvmTrapObjectIaId 1.3.6.1.4.1.232.160.2.6.8
This object is sent in a trap to identify the interface adapter for which the trap condition occurred.
OBJECT-TYPE    
  UTF8String Size(0..32)  

cpqKvmTrapObjectCascadeSwitchName 1.3.6.1.4.1.232.160.2.6.9
This object is sent in a trap to identify the cascade switch for which the trap condition occurred.
OBJECT-TYPE    
  UTF8String Size(0..15)  

cpqKvmTrapObjectOldCascadeSwitchName 1.3.6.1.4.1.232.160.2.6.10
This object is sent in a trap to identify the old name of a cascade switch whose name was changed.
OBJECT-TYPE    
  UTF8String Size(0..15)  

cpqKvmTrapObjectServerName 1.3.6.1.4.1.232.160.2.6.11
This object is sent in a trap to identify the server for which the trap condition occurred.
OBJECT-TYPE    
  UTF8String Size(0..15)  

cpqKvmTrapObjectOldServerName 1.3.6.1.4.1.232.160.2.6.12
This object is sent in a trap to identify the old name of a server whose name was changed.
OBJECT-TYPE    
  UTF8String Size(0..15)  

cpqKvmTrapObjectFileName 1.3.6.1.4.1.232.160.2.6.13
This object is sent in a trap to identify the name of a file for which the trap condition occurred.
OBJECT-TYPE    
  DisplayString Size(0..12)  

cpqKvmTrapObjectFirmwareCondition 1.3.6.1.4.1.232.160.2.6.14
This trap message will contain data for application specific diagnostics. It is designed in provision for diagnostic help for installation-specific problems, would require the operator to install firmware provided to isolate their particular problems and to enable the trap to report conditions. The contents will be an Application Message Packet with the address, size, and command header removed. The parameters of the message will depend on the specific problem the firmware is designed to detect and report.
OBJECT-TYPE    
  STRING Size(0..64)  

cpqKvmTrapObjectDeviceId 1.3.6.1.4.1.232.160.2.6.15
This object is sent in a trap to identify the device for which the trap condition occurred.
OBJECT-TYPE    
  UTF8String Size(0..32)  

cpqKvmTrapObjectAlarmCondition 1.3.6.1.4.1.232.160.2.6.16
This object is sent in a trap to identify Warning/Alarm activity for the device on which the trap condition occurred. Alarm sets the alarm, OK indicates the condition has cleared up.
OBJECT-TYPE    
  INTEGER alarm(1), ok(2)  

cpqKvmTrapObjectAlarmDescription 1.3.6.1.4.1.232.160.2.6.17
This object is sent in a trap to explain the Warning/Alarm condition for which the trap condition occurred. This is intended for display or logging.
OBJECT-TYPE    
  UTF8String Size(0..64)  

cpqKvmTrapObjectLockReason 1.3.6.1.4.1.232.160.2.6.18
This object is sent in a trap to explain the reason for which a user account has been locked.
OBJECT-TYPE    
  UTF8String Size(0..64)  

cpqKvmTrapObjectUnlockReason 1.3.6.1.4.1.232.160.2.6.19
This object is sent in a trap to explain the reason for which a user account has been unlocked.
OBJECT-TYPE    
  UTF8String Size(0..64)  

cpqKvmTrapObjectIPAddress 1.3.6.1.4.1.232.160.2.6.20
This object is sent in a trap to identify the IP address for which a trap condition occurred.
OBJECT-TYPE    
  DisplayString Size(0..32)