CISCOSBLAN1-MIB
File:
CISCOSBLAN1-MIB.mib (11478 bytes)
Imported modules
Imported symbols
Defined Types
GroupId |
|
group id. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
0..1279 |
|
GroupIdList |
|
Each octet within this value specifies a set of eight
groups, with the first octet specifying groups 1 through
8, the second octet specifying groups 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered group, and the least significant bit
represents the highest numbered group. Thus, each group
is represented by a single bit within the value of this
object. If that bit has a value of '1' then that group
is included in the set of groups; the group is not
included if its bit has a value of '0'. |
TEXTUAL-CONVENTION |
|
|
|
|
OCTET STRING |
|
|
RlLan1x86VlanMappingEntry |
|
SEQUENCE |
|
|
|
|
rlLan1x86VlanMappingVlanId |
VlanId |
|
|
rlLan1x86VlanMappingGroupId |
GroupId |
|
|
rlLan1x86VlanMappingRowStatus |
RowStatus |
|
RlLan1VfMacMappingEntry |
|
SEQUENCE |
|
|
|
|
rlLan1VfMacMappingDstMacAddress |
MacAddress |
|
|
rlLan1VfMacMappingVlanId |
VlanId |
|
|
rlLan1VfMacMappingMulticast |
INTEGER |
|
|
rlLan1VfMacMappingRowStatus |
RowStatus |
|
RlLan1ModulePortEntry |
|
SEQUENCE |
|
|
|
|
rlLan1ModulePortIfIndex |
INTEGER |
|
|
rlLan1ModulePortCPAllowed |
TruthValue |
|
|
rlLan1ModulePortMulticastBroadcastAllowedVlan |
INTEGER |
|
|
rlLan1ModulePortIngressGroupId |
GroupId |
|
|
rlLan1ModulePortEgressGroupIdList |
GroupIdList |
|
|
rlLan1ModulePortRowStatus |
RowStatus |
|
RlLan1x86PfcEntry |
|
SEQUENCE |
|
|
|
|
rlLan1x86PriorityIndex |
INTEGER |
|
|
rlLan1x86PriorityIsLossy |
TruthValue |
|
|
rlLan1x86PriorityXoffThreshold |
INTEGER |
|
|
rlLan1x86PriorityXonThreshold |
INTEGER |
|
Defined Values
rlLan1 |
1.3.6.1.4.1.9.6.1.101.224 |
The Lan1 MIB module for supporting Lan1 fetaure. |
MODULE-IDENTITY |
|
|
|
rlLan1STagEtherType |
1.3.6.1.4.1.9.6.1.101.224.1 |
Specifies the Ethernet type identifying the S-VLAN tag. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(2) |
|
rlLan1CPVlanId |
1.3.6.1.4.1.9.6.1.101.224.2 |
Specifies the CP VLAN ID.
0 indicateds no CP vlan. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
VlanIdOrNone |
|
|
rlLan1CPVlanCos |
1.3.6.1.4.1.9.6.1.101.224.3 |
Specifies the cos assigned to ingress traffic on module ports into
the CP VLAN. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..7 |
|
rlLan1x86Port |
1.3.6.1.4.1.9.6.1.101.224.4 |
Specifies the interface-id of the Ethernet port connecting LAN1 to the
x86 environment implementing Virtual Functions (VFs).
0 indicateds no x86 port defined. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..1000 |
|
rlLan1x86VlanMappingEntry |
1.3.6.1.4.1.9.6.1.101.224.5.1 |
A mapping of incoming s-tag to a group. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlLan1x86VlanMappingEntry |
|
|
rlLan1VfMacMappingEntry |
1.3.6.1.4.1.9.6.1.101.224.6.1 |
A mapping of incoming s-tag to a group. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlLan1VfMacMappingEntry |
|
|
rlLan1VfMacMappingMulticast |
1.3.6.1.4.1.9.6.1.101.224.6.1.3 |
cp - Specifies the VF which S-VLAN-ID is assigned to multicast/broadcast traffic bridged into the CP VLAN from modules to x86
noncp - Specifies the VF which S-VLAN-ID is assigned to multicast/broadcast traffic |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), cp(2), noncp(3) |
|
rlLan1ModulePortEntry |
1.3.6.1.4.1.9.6.1.101.224.7.1 |
A mapping of incoming s-tag to a group. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlLan1ModulePortEntry |
|
|
rlLan1ModulePortIfIndex |
1.3.6.1.4.1.9.6.1.101.224.7.1.1 |
Specifies the interface-id. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..1000 |
|
rlLan1ModulePortCPAllowed |
1.3.6.1.4.1.9.6.1.101.224.7.1.2 |
Specifies that CP traffic is allowed on the port, it is used to
allow CP multicast/broadcast traffic. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
rlLan1ModulePortMulticastBroadcastAllowedVlan |
1.3.6.1.4.1.9.6.1.101.224.7.1.3 |
Specifies that multicast/broadcast traffic is allowed on the CP VLAN
or on non-CP VLAN.
If the parameter is not configured then only unicast traffic is allowed. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
none(1), cp(2), noncp(3) |
|
rlLan1ModulePortIngressGroupId |
1.3.6.1.4.1.9.6.1.101.224.7.1.4 |
Specifies the group number assigned to the input frame on the interface |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
GroupId |
|
|
rlLan1x86PfcTable |
1.3.6.1.4.1.9.6.1.101.224.8 |
A table that contains information on a LAN1 x86 port PFC configuration per priority. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
RlLan1x86PfcEntry |
|
rlLan1x86PfcEntry |
1.3.6.1.4.1.9.6.1.101.224.8.1 |
PFC information per priority |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RlLan1x86PfcEntry |
|
|
rlLan1x86PriorityIndex |
1.3.6.1.4.1.9.6.1.101.224.8.1.1 |
Specifies the priority index. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..7 |
|
rlLan1x86PriorityXoffThreshold |
1.3.6.1.4.1.9.6.1.101.224.8.1.3 |
Specifies the value of triggering pause frames when crossing over the threshold |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
rlLan1x86PriorityXonThreshold |
1.3.6.1.4.1.9.6.1.101.224.8.1.4 |
Specifies the value of triggering continue frames when crossing under the threshold |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|