CISCO-STP-EXTENSIONS-MIB

File: CISCO-STP-EXTENSIONS-MIB.mib (186852 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
CISCO-VTP-MIB BRIDGE-MIB CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
Integer32 Unsigned32 NOTIFICATION-TYPE
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
TruthValue TimeStamp DisplayString
RowStatus TEXTUAL-CONVENTION vlanTrunkPortEntry
VlanIndex vtpVlanEntry vtpVlanEditEntry
dot1dStpPortEntry ciscoMgmt

Defined Types

StpxMSTConfigurationDigest  
TEXTUAL-CONVENTION    
  current STRING Size(16)

StpxPreferredVlansEntry  
SEQUENCE    
  stpxPreferredVlansMap STRING
  stpxPreferredVlansMap2k STRING
  stpxPreferredVlansMap3k STRING
  stpxPreferredVlansMap4k STRING

StpxPVSTVlanEntry  
SEQUENCE    
  stpxPVSTVlanIndex VlanIndex
  stpxPVSTVlanEnable INTEGER

StpxInconsistencyEntry  
SEQUENCE    
  stpxVlanIndex VlanIndex
  stpxPortIndex Integer32
  stpxInconsistentState BITS

StpxRootGuardConfigEntry  
SEQUENCE    
  stpxRootGuardConfigPortIndex Integer32
  stpxRootGuardConfigEnabled TruthValue

StpxRootInconsistencyEntry  
SEQUENCE    
  stpxRootInconsistencyIndex Integer32
  stpxRootInconsistencyPortIndex Integer32
  stpxRootInconsistencyState TruthValue

StpxLongStpPortPathCostEntry  
SEQUENCE    
  stpxLongStpPortPathCost Unsigned32

StpxMISTPInstanceEntry  
SEQUENCE    
  stpxMISTPInstanceIndex Integer32
  stpxMISTPInstanceEnable TruthValue
  stpxMISTPInstanceVlansMapped STRING
  stpxMISTPInstanceVlansMapped2k STRING
  stpxMISTPInstanceVlansMapped3k STRING
  stpxMISTPInstanceVlansMapped4k STRING

StpxVlanMISTPInstMapEntry  
SEQUENCE    
  stpxVlanMISTPInstMapInstIndex Integer32

StpxVlanMISTPInstMapEditEntry  
SEQUENCE    
  stpxVlanMISTPInstMapEditInstIndex Integer32

StpxPreferredMISTPInstancesEntry  
SEQUENCE    
  stpxPreferredMISTPInstancesMap STRING

StpxLoopGuardConfigEntry  
SEQUENCE    
  stpxLoopGuardConfigPortIndex Integer32
  stpxLoopGuardConfigEnabled TruthValue
  stpxLoopGuardConfigMode INTEGER

StpxLoopInconsistencyEntry  
SEQUENCE    
  stpxLoopInconsistencyIndex Integer32
  stpxLoopInconsistencyPortIndex Integer32
  stpxLoopInconsistencyState TruthValue

StpxFastStartPortEntry  
SEQUENCE    
  stpxFastStartPortIndex Integer32
  stpxFastStartPortEnable TruthValue
  stpxFastStartPortMode INTEGER
  stpxFastStartPortBpduGuardMode INTEGER
  stpxFastStartPortBpduFilterMode INTEGER

StpxFastStartOperModeEntry  
SEQUENCE    
  stpxFastStartOperModeInstIndex Integer32
  stpxFastStartOperModePortIndex Integer32
  stpxFastStartOperMode INTEGER

StpxBpduSkewingEntry  
SEQUENCE    
  stpxBpduSkewingInstanceIndex Integer32
  stpxBpduSkewingPortIndex Integer32
  stpxBpduSkewingLastSkewDuration Unsigned32
  stpxBpduSkewingWorstSkewDuration Unsigned32
  stpxBpduSkewingWorstSkewTime TimeStamp

StpxMSTInstanceEntry  
SEQUENCE    
  stpxMSTInstanceIndex Integer32
  stpxMSTInstanceVlansMapped STRING
  stpxMSTInstanceVlansMapped2k STRING
  stpxMSTInstanceVlansMapped3k STRING
  stpxMSTInstanceVlansMapped4k STRING
  stpxMSTInstanceRemainingHopCount Integer32

StpxMSTInstanceEditEntry  
SEQUENCE    
  stpxMSTInstanceEditIndex Integer32
  stpxMSTInstanceEditVlansMap STRING
  stpxMSTInstanceEditVlansMap2k STRING
  stpxMSTInstanceEditVlansMap3k STRING
  stpxMSTInstanceEditVlansMap4k STRING

StpxPreferredMSTInstancesEntry  
SEQUENCE    
  stpxPreferredMSTInstancesMap STRING

StpxMSTPortEntry  
SEQUENCE    
  stpxMSTPortIndex Integer32
  stpxMSTPortAdminLinkType INTEGER
  stpxMSTPortOperLinkType INTEGER
  stpxMSTPortProtocolMigration TruthValue
  stpxMSTPortStatus BITS

StpxMSTPortRoleEntry  
SEQUENCE    
  stpxMSTPortRoleInstanceIndex Integer32
  stpxMSTPortRolePortIndex Integer32
  stpxMSTPortRoleValue INTEGER

StpxRSTPPortEntry  
SEQUENCE    
  stpxRSTPPortIndex Integer32
  stpxRSTPPortAdminLinkType INTEGER
  stpxRSTPPortOperLinkType INTEGER
  stpxRSTPPortProtocolMigration TruthValue

StpxRSTPPortRoleEntry  
SEQUENCE    
  stpxRSTPPortRoleInstanceIndex Integer32
  stpxRSTPPortRolePortIndex Integer32
  stpxRSTPPortRoleValue INTEGER

StpxRPVSTPortEntry  
SEQUENCE    
  stpxRPVSTPortVlanIndex VlanIndex
  stpxRPVSTPortIndex Integer32
  stpxRPVSTPortStatus BITS

StpxSMSTInstanceEntry  
SEQUENCE    
  stpxSMSTInstanceIndex Unsigned32
  stpxSMSTInstanceVlansMapped1k2k STRING
  stpxSMSTInstanceVlansMapped3k4k STRING
  stpxSMSTInstanceRemainingHopCount Integer32
  stpxSMSTInstanceCISTRegionalRoot STRING
  stpxSMSTInstanceCISTIntRootCost Unsigned32

StpxSMSTInstanceEditEntry  
SEQUENCE    
  stpxSMSTInstanceEditIndex Unsigned32
  stpxSMSTInstanceEditVlansMap1k2k STRING
  stpxSMSTInstanceEditVlansMap3k4k STRING
  stpxSMSTInstanceEditRowStatus RowStatus

StpxSMSTPortEntry  
SEQUENCE    
  stpxSMSTPortIndex Integer32
  stpxSMSTPortStatus BITS
  stpxSMSTPortAdminHelloTime Unsigned32
  stpxSMSTPortConfigedHelloTime Unsigned32
  stpxSMSTPortOperHelloTime Integer32
  stpxSMSTPortAdminMSTMode INTEGER
  stpxSMSTPortOperMSTMode INTEGER

Defined Values

ciscoStpExtensionsMIB 1.3.6.1.4.1.9.9.82
The MIB module for managing Cisco extensions to the 802.1D Spanning Tree Protocol (STP).
MODULE-IDENTITY    

stpxObjects 1.3.6.1.4.1.9.9.82.1
OBJECT IDENTIFIER    

stpxUplinkFastObjects 1.3.6.1.4.1.9.9.82.1.1
OBJECT IDENTIFIER    

stpxVlanObjects 1.3.6.1.4.1.9.9.82.1.2
OBJECT IDENTIFIER    

stpxInconsistencyObjects 1.3.6.1.4.1.9.9.82.1.3
OBJECT IDENTIFIER    

stpxBackboneFastObjects 1.3.6.1.4.1.9.9.82.1.4
OBJECT IDENTIFIER    

stpxRootGuardObjects 1.3.6.1.4.1.9.9.82.1.5
OBJECT IDENTIFIER    

stpxSpanningTreeObjects 1.3.6.1.4.1.9.9.82.1.6
OBJECT IDENTIFIER    

stpxMISTPObjects 1.3.6.1.4.1.9.9.82.1.7
OBJECT IDENTIFIER    

stpxLoopGuardObjects 1.3.6.1.4.1.9.9.82.1.8
OBJECT IDENTIFIER    

stpxFastStartObjects 1.3.6.1.4.1.9.9.82.1.9
OBJECT IDENTIFIER    

stpxBpduSkewingObjects 1.3.6.1.4.1.9.9.82.1.10
OBJECT IDENTIFIER    

stpxMSTObjects 1.3.6.1.4.1.9.9.82.1.11
OBJECT IDENTIFIER    

stpxRSTPObjects 1.3.6.1.4.1.9.9.82.1.12
OBJECT IDENTIFIER    

stpxRPVSTObjects 1.3.6.1.4.1.9.9.82.1.13
OBJECT IDENTIFIER    

stpxSMSTObjects 1.3.6.1.4.1.9.9.82.1.14
OBJECT IDENTIFIER    

stpxNotifications 1.3.6.1.4.1.9.9.82.2
OBJECT IDENTIFIER    

stpxUplinkFastEnabled 1.3.6.1.4.1.9.9.82.1.1.1
An indication of whether the UplinkFast capability is administratively enabled on the device. If the platform does not support configuration of this object when the object value of stpxSpanningTreeType is mst(4), then this object is not instantiated.
OBJECT-TYPE    
  TruthValue  

stpxUplinkFastTransitions 1.3.6.1.4.1.9.9.82.1.1.2
The cumulative number of UplinkFast transitions (from the STP 'Blocking' state directly to the STP 'Forwarding' state). All transitions are included in this counter, irrespective of the instance of the Spanning Tree Protocol on which they occur. If the platform supports the stpxUplinkFastOperEnabled object, then this object is not instantiated when the object value of stpxUplinkFastOperEnabled is false(2). If the platform does not support the stpxUplinkFastOperEnabled object, then this object is not instantiated when the object value of stpxSpanningTreeType is mst(4).
OBJECT-TYPE    
  Counter32  

stpxUplinkStationLearningGenRate 1.3.6.1.4.1.9.9.82.1.1.3
The maximum number of station-learning frames that this device will generate in each 100 milli-second period after a UplinkFast transition. By configuring this object, the network administrator can limit the rate at which station-learning frames are generated. If the platform does not support configuration of this object when the object value of stpxSpanningTreeType is mst(4), then this object is not instantiated.
OBJECT-TYPE    
  Integer32 0..32000  

stpxUplinkStationLearningFrames 1.3.6.1.4.1.9.9.82.1.1.4
The cumulative number of station-learning frames generated due to UplinkFast transitions. All generated station-learning frames are included in this counter, irrespective of the instance of the Spanning Tree Protocol on which the UplinkFast transition occurred. If the platform supports the stpxUplinkFastOperEnabled object, then this object is not instantiated when the object value of stpxUplinkFastOperEnabled is false(2). If the platform does not support the stpxUplinkFastOperEnabled object, then this object is not instantiated when the object value of stpxSpanningTreeType is mst(4).
OBJECT-TYPE    
  Counter32  

stpxUplinkFastOperEnabled 1.3.6.1.4.1.9.9.82.1.1.5
An indication of whether the UplinkFast capability is operationally enabled on the device.
OBJECT-TYPE    
  TruthValue  

stpxPreferredVlansTable 1.3.6.1.4.1.9.9.82.1.2.1
The table containing indications of which VLANs are preferred on which VLAN trunk ports. The preferred VLANs on a trunk port have a lower Path Cost value compared with the VLANs on the trunk not in the preferred list. If the value of stpxSpanningTreeType is neither pvstPlus(1) nor rapidPvstPlus(5), the configuration in this table has no effect.
OBJECT-TYPE    
  SEQUENCE OF  
    StpxPreferredVlansEntry

stpxPreferredVlansEntry 1.3.6.1.4.1.9.9.82.1.2.1.1
An entry indicating which VLANs are preferred on a specific VLAN trunk port.
OBJECT-TYPE    
  StpxPreferredVlansEntry  

stpxPreferredVlansMap 1.3.6.1.4.1.9.9.82.1.2.1.1.1
A string of octets containing one bit per VLAN in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is preferred on this trunk port, then the bit corresponding to that VLAN is set to '1'. The default value is 128 bytes of zeros. To avoid conflicts between overlapping partial updates by multiple managers, i.e., updates which modify only a portion of an instance of this object (e.g., enable/disable a single VLAN on the trunk port), any SNMP Set operation accessing an instance of this object should also write the value of vlanTrunkPortSetSerialNo.
OBJECT-TYPE    
  STRING Size(128)  

stpxPreferredVlansMap2k 1.3.6.1.4.1.9.9.82.1.2.1.1.2
A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 1024 through 2047 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 1024 through 1031; the second octet to VLANs 1032 through 1039; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is preferred on this trunk port, then the bit corresponding to that VLAN is set to '1'. The default value is 128 bytes of zeros. To avoid conflicts between overlapping partial updates by multiple managers, i.e., updates which modify only a portion of an instance of this object (e.g., enable/disable a single VLAN on the trunk port), any SNMP Set operation accessing an instance of this object should also write the value of vlanTrunkPortSetSerialNo.
OBJECT-TYPE    
  STRING Size(0..128)  

stpxPreferredVlansMap3k 1.3.6.1.4.1.9.9.82.1.2.1.1.3
A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is preferred on this trunk port, then the bit corresponding to that VLAN is set to '1'. The default value is 128 bytes of zeros. To avoid conflicts between overlapping partial updates by multiple managers, i.e., updates which modify only a portion of an instance of this object (e.g., enable/disable a single VLAN on the trunk port), any SNMP Set operation accessing an instance of this object should also write the value of vlanTrunkPortSetSerialNo.
OBJECT-TYPE    
  STRING Size(0..128)  

stpxPreferredVlansMap4k 1.3.6.1.4.1.9.9.82.1.2.1.1.4
A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 3072 through 4095 in the management domain on this trunk port. The first octet corresponds to VLANs with VlanIndex values of 3072 through 3079; the second octet to VLANs 3080 through 3087; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is preferred on this trunk port, then the bit corresponding to that VLAN is set to '1'. The default value is 128 bytes of zeros. To avoid conflicts between overlapping partial updates by multiple managers, i.e., updates which modify only a portion of an instance of this object (e.g., enable/disable a single VLAN on the trunk port), any SNMP Set operation accessing an instance of this object should also write the value of vlanTrunkPortSetSerialNo.
OBJECT-TYPE    
  STRING Size(0..128)  

stpxPVSTVlanTable 1.3.6.1.4.1.9.9.82.1.2.2
A list of Virtual LAN entries containing information for Spanning Tree PVST+ protocol. An entry will exist for each VLAN existing on the device.
OBJECT-TYPE    
  SEQUENCE OF  
    StpxPVSTVlanEntry

stpxPVSTVlanEntry 1.3.6.1.4.1.9.9.82.1.2.2.1
An entry containing Spanning Tree PVST+ Protocol information for a particular Virtual LAN.
OBJECT-TYPE    
  StpxPVSTVlanEntry  

stpxPVSTVlanIndex 1.3.6.1.4.1.9.9.82.1.2.2.1.1
An index value that uniquely identifies the Virtual LAN associated with this information.
OBJECT-TYPE    
  VlanIndex  

stpxPVSTVlanEnable 1.3.6.1.4.1.9.9.82.1.2.2.1.2
Indicates whether Spanning Tree PVST+ Protocol is enabled for this Virtual LAN. If Spanning Tree PVST+ Protocol is not supported on this VLAN, then notApplicable(3) will be returned while retrieving the object value for this VLAN. If the device only supports a single global Spanning Tree PVST+ Protocol enable/disable for all the existing VLANs, then the object value assigned to this VLAN will be applied to the object values of all the instances in this table which do not have the value of notApplicable(3). If the value of stpxSpanningTreeType is neither pvstPlus(1) nor rapidPvstPlus(5), then the value of stpxPVSTVlanEnable for this VLAN can not be changed.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), notApplicable(3)  

stpxInconsistencyTable 1.3.6.1.4.1.9.9.82.1.3.1
A table containing a list of the ports for which a particular VLAN's Spanning Tree has been found to have an inconsistency. Two types of inconsistency are discovered: 1) an inconsistency where two different port types have been plugged together; and 2) an inconsistency where different switches have different PVIDs for the same link.
OBJECT-TYPE    
  SEQUENCE OF  
    StpxInconsistencyEntry

stpxInconsistencyEntry 1.3.6.1.4.1.9.9.82.1.3.1.1
A VLAN on a particular port for which a Spanning Tree inconsistency is currently in effect.
OBJECT-TYPE    
  StpxInconsistencyEntry  

stpxVlanIndex 1.3.6.1.4.1.9.9.82.1.3.1.1.1
The VLAN id of the VLAN.
OBJECT-TYPE    
  VlanIndex  

stpxPortIndex 1.3.6.1.4.1.9.9.82.1.3.1.1.2
The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
OBJECT-TYPE    
  Integer32 1..65535  

stpxInconsistentState 1.3.6.1.4.1.9.9.82.1.3.1.1.3
The types of inconsistency which have been discovered on this port for this VLAN's Spanning Tree. When this object exists, the value of the corresponding instance of the Bridge MIB's dot1dStpPortState object will be 'broken(6)'.
OBJECT-TYPE    
  BITS typeInconsistent(0), pvidInconsistent(1)  

stpxBackboneFastEnabled 1.3.6.1.4.1.9.9.82.1.4.1
An indication of whether the BackboneFast capability is administratively enabled on the device.
OBJECT-TYPE    
  TruthValue  

stpxBackboneFastInInferiorBPDUs 1.3.6.1.4.1.9.9.82.1.4.2
The number of inferior BPDUs received by the switch since the stpxBackboneFastOperEnabled has become true(1). If the value of stpxBackboneFastOperEnabled is false(2), then this mib object will have a value of 0.
OBJECT-TYPE    
  Counter32  

stpxBackboneFastInRLQRequestPDUs 1.3.6.1.4.1.9.9.82.1.4.3
The number of Root Link Query request PDUs received by the switch since the stpxBackboneFastOperEnabled has become true(1). If the value of stpxBackboneFastOperEnabled is false(2), then this mib object will have a value of 0.
OBJECT-TYPE    
  Counter32  

stpxBackboneFastInRLQResponsePDUs 1.3.6.1.4.1.9.9.82.1.4.4
The number of Root Link Query response PDUs received by the switch since the stpxBackboneFastOperEnabled has become true(1). If the value of stpxBackboneFastOperEnabled is false(2), then this mib object will have a value of 0.
OBJECT-TYPE    
  Counter32  

stpxBackboneFastOutRLQRequestPDUs 1.3.6.1.4.1.9.9.82.1.4.5
The number of Root Link Query request PDUs transmitted by the switch since the stpxBackboneFastOperEnabled has become true(1). If the value of stpxBackboneFastOperEnabled is false(2), then this mib object will have a value of 0.
OBJECT-TYPE    
  Counter32  

stpxBackboneFastOutRLQResponsePDUs 1.3.6.1.4.1.9.9.82.1.4.6
The number of Root Link Query response PDUs transmitted by the switch since the stpxBackboneFastOperEnabled has become true(1). If the value of stpxBackboneFastOperEnabled is false(2), then this mib object will have a value of 0.
OBJECT-TYPE    
  Counter32  

stpxBackboneFastOperEnabled 1.3.6.1.4.1.9.9.82.1.4.7
An indication of whether the BackboneFast capability is operationally enabled on the device.
OBJECT-TYPE    
  TruthValue  

stpxRootGuardConfigTable 1.3.6.1.4.1.9.9.82.1.5.1
A table containing a list of the bridge ports for which Spanning Tree RootGuard capability can be configured.
OBJECT-TYPE    
  SEQUENCE OF  
    StpxRootGuardConfigEntry

stpxRootGuardConfigEntry 1.3.6.1.4.1.9.9.82.1.5.1.1
A bridge port for which Spanning Tree RootGuard capability can be configured.
OBJECT-TYPE    
  StpxRootGuardConfigEntry  

stpxRootGuardConfigPortIndex 1.3.6.1.4.1.9.9.82.1.5.1.1.1
The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
OBJECT-TYPE    
  Integer32 1..65535  

stpxRootGuardConfigEnabled 1.3.6.1.4.1.9.9.82.1.5.1.1.2
An indication of whether the RootGuard capability is enabled on this port or not. This configuration will be applied to all Spanning Tree instances in which this port exists.
OBJECT-TYPE    
  TruthValue  

stpxRootInconsistencyTable 1.3.6.1.4.1.9.9.82.1.5.2
A table containing a list of the bridge ports for which a particular Spanning Tree instance has been found to have an root-inconsistency. The agent creates a new entry in this table whenever it detects a new root-inconsistency, and deletes entries when/soon after the inconsistency is no longer present.
OBJECT-TYPE    
  SEQUENCE OF  
    StpxRootInconsistencyEntry

stpxRootInconsistencyEntry 1.3.6.1.4.1.9.9.82.1.5.2.1
A Spanning Tree instance on a particular port for which a Spanning Tree root-inconsistency is currently in effect.
OBJECT-TYPE    
  StpxRootInconsistencyEntry  

stpxRootInconsistencyIndex 1.3.6.1.4.1.9.9.82.1.5.2.1.1
The Spanning Tree instance id, such as the VLAN id of the VLAN if the object value of stpxSpanningTreeType is pvstPlus(1) or rapidPvstPlus(5).
OBJECT-TYPE    
  Integer32 0..65535  

stpxRootInconsistencyPortIndex 1.3.6.1.4.1.9.9.82.1.5.2.1.2
The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
OBJECT-TYPE    
  Integer32 1..65535  

stpxRootInconsistencyState 1.3.6.1.4.1.9.9.82.1.5.2.1.3
Indicates whether the port on a particular Spanning Tree instance is currently in root-inconsistent state or not.
OBJECT-TYPE    
  TruthValue  

stpxSpanningTreeType 1.3.6.1.4.1.9.9.82.1.6.1
The actual mode of spanning tree protocol runs on the device. It can be one of the following: pvstPlus -- PVST+ (Per VLAN Spanning Tree+ Protocol). mistp -- MISTP (Multi Instance Spanning Tree Protocol). mistpPvstPlus -- MISTP with the tunneling scheme enabled for PVST+. mst -- IEEE 802.1s Multiple Spanning Tree (MST) with IEEE 802.1w Rapid Spanning Tree Protocol (RSTP). rapidPvstPlus -- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for all vlans in PVST+. When the value of this MIB object gets changed, the network connectivity would be affected and the connectivity to this device would also be lost temporarily.
OBJECT-TYPE    
  INTEGER pvstPlus(1), mistp(2), mistpPvstPlus(3), mst(4), rapidPvstPlus(5)  

stpxSpanningTreePathCostMode 1.3.6.1.4.1.9.9.82.1.6.2
Indicates the administrative spanning tree path cost mode configured on device.
OBJECT-TYPE    
  INTEGER short(1), long(2)  

stpxLongStpPortPathCostTable 1.3.6.1.4.1.9.9.82.1.6.3
A table containing the spanning tree port path cost configuration when stpxSpanningTreePathCostOperMode is long(2). If the value of stpxSpanningTreePathCostOperMode is short(1), this table is not instantiated.
OBJECT-TYPE    
  SEQUENCE OF  
    StpxLongStpPortPathCostEntry

stpxLongStpPortPathCostEntry 1.3.6.1.4.1.9.9.82.1.6.3.1
A conceptual row containing the spanning tree port path cost configuration.
OBJECT-TYPE    
  StpxLongStpPortPathCostEntry  

stpxLongStpPortPathCost 1.3.6.1.4.1.9.9.82.1.6.3.1.1
The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning tree root which include this port. This object is used to configure the spanning tree port path cost in 32 bits value range when the stpxSpanningTreePathCostOperMode is long(2). If the stpxSpanningTreePathCostOperMode is short(1), this MIB object is not instantiated.
OBJECT-TYPE    
  Unsigned32  

stpxExtendedSysIDAdminEnabled 1.3.6.1.4.1.9.9.82.1.6.4
Indicates whether Extended System ID feature is administratively enabled on the device or not.
OBJECT-TYPE    
  TruthValue  

stpxExtendedSysIDOperEnabled 1.3.6.1.4.1.9.9.82.1.6.5
Indicates whether Extended System ID feature is operationaly enabled on the device or not. If the value of this object is true(1), then the accepted values for dot1dStpPriority in BRIDGE-MIB should be multiples of 4096 plus bridge instance ID, such as VlanIndex. Changing this object value might cause the values of dot1dBaseBridgeAddress and dot1dStpPriority in BRIDGE-MIB to be changed also.
OBJECT-TYPE    
  TruthValue  

stpxNotificationEnable 1.3.6.1.4.1.9.9.82.1.6.6
Indicates whether a specified notification is enabled or not. If a bit corresponding to a notification is set to 1, then the specified notification can be generated. newRoot -- the newRoot notification as defined in BRIDGE-MIB. topologyChange -- the topologyChange notification as defined in BRIDGE-MIB. inconsistency -- the stpxInconsistencyUpdate notification. rootInconsistency -- the stpxRootInconsistencyUpdate notification. loopInconsistency -- the stpxLoopInconsistencyUpdate notification.
OBJECT-TYPE    
  BITS newRoot(0), topologyChange(1), inconsistency(2), rootInconsistency(3), loopInconsistency(4)  

stpxSpanningTreePathCostOperMode 1.3.6.1.4.1.9.9.82.1.6.7
Indicate the operational spanning tree path cost mode on device. This mode applies to all instances of the Spanning Tree protocol running on the device. When the value of this MIB object gets changed, the path cost of all ports will be reassigned to the default path cost values based on the new spanning tree path cost mode and the ports' speed. When the value of this MIB object is long(2), the stpxLongStpPortPathCost MIB object must be used in order to retrieve/configure the spanning tree port path cost as a 32 bits value. The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected. While retrieving the value of dot1dStpPortPathCost, the maximum value of 65535 will be returned if the value of stpxLongStpPortPathCost for the same instance exceeds 65535. When the value of this MIB object is short(1), the dot1dStpPortPathCost in BRIDGE-MIB must be used.
OBJECT-TYPE    
  INTEGER short(1), long(2)  

stpxMISTPInstanceNumber 1.3.6.1.4.1.9.9.82.1.7.1
The number of MISTP instances, that are supported by the device when the value of stpxSpanningTreeType is either mistp(2) or mistpPvstPlus(3).
OBJECT-TYPE    
  Integer32 1..256  

stpxMISTPInstanceTable 1.3.6.1.4.1.9.9.82.1.7.2
This table contains one entry for each instance of MISTP and it contains stpxMISTPInstanceNumber entries, numbered from 1 to stpxMISTPInstanceNumber. This table is only instantiated when the value of stpxSpanningTreeType is mistp(2) or mistpPvstPlus(3).
OBJECT-TYPE    
  SEQUENCE OF  
    StpxMISTPInstanceEntry

stpxMISTPInstanceEntry 1.3.6.1.4.1.9.9.82.1.7.2.1
A conceptual row containing the status of the MISTP instance.
OBJECT-TYPE    
  StpxMISTPInstanceEntry  

stpxMISTPInstanceIndex 1.3.6.1.4.1.9.9.82.1.7.2.1.1
An arbitrary integer within the range from 1 to the value of stpxMISTPInstanceNumber that uniquely identifies an instance.
OBJECT-TYPE    
  Integer32 1..256  

stpxMISTPInstanceEnable 1.3.6.1.4.1.9.9.82.1.7.2.1.2
This object indicates whether the MISTP protocol is currently enabled on the MISTP instance. If this object is set to 'true' - the MISTP protocol will run on this instance. 'false' - the MISTP protocol will stop running on this instance.
OBJECT-TYPE    
  TruthValue  

stpxMISTPInstanceVlansMapped 1.3.6.1.4.1.9.9.82.1.7.2.1.3
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is mapped to this MISTP instance, then the bit corresponding to that VLAN is set to '1'.
OBJECT-TYPE    
  STRING Size(0..128)  

stpxMISTPInstanceVlansMapped2k 1.3.6.1.4.1.9.9.82.1.7.2.1.4
A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values of 1024 through 1031; the second octet to VLANs 1032 through 1039; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is mapped to this MISTP instance, then the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex up to 4095.
OBJECT-TYPE    
  STRING Size(0..128)  

stpxMISTPInstanceVlansMapped3k 1.3.6.1.4.1.9.9.82.1.7.2.1.5
A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is mapped to this MISTP instance, then the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex up to 4095.
OBJECT-TYPE    
  STRING Size(0..128)  

stpxMISTPInstanceVlansMapped4k 1.3.6.1.4.1.9.9.82.1.7.2.1.6
A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values of 3072 through 3079; the second octet to VLANs 3080 through 3087; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is mapped to this MISTP instance, then the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex up to 4095.
OBJECT-TYPE    
  STRING Size(0..128)  

stpxVlanMISTPInstMapTable 1.3.6.1.4.1.9.9.82.1.7.3
A table containing the MISTP Instance Index of the VLANs for a particular management domain. This table is only instantiated when the value of stpxSpanningTreeType is mistp(2) or mistpPvstPlus(3).
OBJECT-TYPE    
  SEQUENCE OF  
    StpxVlanMISTPInstMapEntry

stpxVlanMISTPInstMapEntry 1.3.6.1.4.1.9.9.82.1.7.3.1
A conceptual row containing the MISTP Instance Index of the VLAN for a particular management domain.
OBJECT-TYPE    
  StpxVlanMISTPInstMapEntry  

stpxVlanMISTPInstMapInstIndex 1.3.6.1.4.1.9.9.82.1.7.3.1.1
The MISTP instance, to which the corresponding vlan is mapped. If this value of this mib object is 0, the corresponding vlan is not configured to be mapped to any MISTP instance and all the ports under this VLAN remain in blocking state.
OBJECT-TYPE    
  Integer32 0..256  

stpxVlanMISTPInstMapEditTable 1.3.6.1.4.1.9.9.82.1.7.4
A table containing the MISTP related information for the VLANs in the Edit Buffers for a particular management domain. This table is only instantiated when when the value of stpxSpanningTreeType is mistp(2) or mistpPvstPlus(3).
OBJECT-TYPE    
  SEQUENCE OF  
    StpxVlanMISTPInstMapEditEntry

stpxVlanMISTPInstMapEditEntry 1.3.6.1.4.1.9.9.82.1.7.4.1
Information about one VLAN mapping to one instance in the Edit Buffer for a particular management domain.
OBJECT-TYPE    
  StpxVlanMISTPInstMapEditEntry  

stpxVlanMISTPInstMapEditInstIndex 1.3.6.1.4.1.9.9.82.1.7.4.1.1
The MISTP instance, to which the corresponding vlan would be mapped. The value of this mib object is from 0 to the value of stpxMISTPInstanceNumber. If setting the value of this object to 0, the corresponding vlan will not be mapped to a MISTP instance and all the ports under this VLAN will be moved into the blocking state.
OBJECT-TYPE    
  Integer32 0..256  

stpxPreferredMISTPInstancesTable 1.3.6.1.4.1.9.9.82.1.7.5
The table containing indications of which MISTP instances are preferred on which trunk ports. The preferred MISTP instances on a trunk port have a lower Path Cost value compared with the MISTP instances on the trunk not in the preferred list. This table is only instantiated when the value of stpxSpanningTreeType is mistp(2) or mistpPvstPlus(3).
OBJECT-TYPE    
  SEQUENCE OF  
    StpxPreferredMISTPInstancesEntry

stpxPreferredMISTPInstancesEntry 1.3.6.1.4.1.9.9.82.1.7.5.1
An entry indicating which MISTP instances are preferred on a specific trunk port.
OBJECT-TYPE    
  StpxPreferredMISTPInstancesEntry  

stpxPreferredMISTPInstancesMap 1.3.6.1.4.1.9.9.82.1.7.5.1.1
A string of octets containing one bit per MISTP instances in the management domain on this trunk port. The first octet corresponds to MISTP instances with InstIndex values of 1 through 8; the second octet to MISTP instances 9 through 16; etc. The most significant bit of each octet corresponds to the lowest value instanceIndex in that octet. The number of bits for this mib object will be determined by the value of stpxMISTPInstanceNumber. For each instance, if it is preferred on this trunk port, then the bit corresponding to that instance is set to '1'. To avoid conflicts between overlapping partial updates by multiple managers, i.e., updates which modify only a portion of an instance of this object (e.g., enable/disable a single instance on the trunk port), any SNMP Set operation accessing an instance of this object should also write the value of vlanTrunkPortSetSerialNo.
OBJECT-TYPE    
  STRING Size(1..32)  

stpxLoopGuardConfigTable 1.3.6.1.4.1.9.9.82.1.8.1
A table containing a list of the bridge ports for which Spanning Tree LoopGuard capability can be configured.
OBJECT-TYPE    
  SEQUENCE OF  
    StpxLoopGuardConfigEntry

stpxLoopGuardConfigEntry 1.3.6.1.4.1.9.9.82.1.8.1.1
A bridge port for which Spanning Tree LoopGuard capability can be configured.
OBJECT-TYPE    
  StpxLoopGuardConfigEntry  

stpxLoopGuardConfigPortIndex 1.3.6.1.4.1.9.9.82.1.8.1.1.1
The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
OBJECT-TYPE    
  Integer32 1..65535  

stpxLoopGuardConfigEnabled 1.3.6.1.4.1.9.9.82.1.8.1.1.2
An indication of whether the LoopGuard capability is enabled on this port or not. This configuration will be applied to all the Spanning Tree instances in which this port exists. In order to support additional Loop Guard config mode (default) as defined in stpxLoopGuardConfigMode other than enable (true(1)) or disable (false(2)) as defined in this object, stpxLoopGuardConfigMode object needs to be used. When the stpxLoopGuardConfigMode object has the value of enable(1), the value of stpxLoopGuardConfigEnabled for the same instance will be true(1). When the stpxLoopGuardConfigMode object has the value of disable(2), the value of stpxLoopGuardConfigEnabled for the same instance will be false(2). When the stpxLoopGuardConfigMode object has the value of default(3), the value of stpxLoopGuardConfigEnabled for the same instance will depend on the object value of stpxLoopGuardGlobalDefaultMode.
OBJECT-TYPE    
  TruthValue  

stpxLoopGuardConfigMode 1.3.6.1.4.1.9.9.82.1.8.1.1.3
Indicates the mode of Loop Guard Feature on this port. This configuration will be applied to all the Spanning Tree instances in which this port exists. enable -- the Loop Guard feature is enabled on this port. disable -- the Loop Guard feature is disabled on this port. default -- whether the Loop Guard feature is enabled or not on this port depends on the object value of stpxLoopGuardGlobalDefaultMode.
OBJECT-TYPE    
  INTEGER enable(1), disable(2), default(3)  

stpxLoopInconsistencyTable 1.3.6.1.4.1.9.9.82.1.8.2
A table containing a list of the bridge ports for which a particular Spanning Tree instance has been found to have a loop-inconsistency. The agent creates a new entry in this table whenever it detects a new loop-inconsistency, and deletes entries when/soon after the inconsistency is no longer present.
OBJECT-TYPE    
  SEQUENCE OF  
    StpxLoopInconsistencyEntry

stpxLoopInconsistencyEntry 1.3.6.1.4.1.9.9.82.1.8.2.1
A Spanning Tree instance on a particular port for which a Spanning Tree loop-inconsistency is currently in effect.
OBJECT-TYPE    
  StpxLoopInconsistencyEntry  

stpxLoopInconsistencyIndex 1.3.6.1.4.1.9.9.82.1.8.2.1.1
The Spanning Tree instance id, such as the VLAN id of the VLAN if the object value of stpxSpanningTreeType is pvstPlus(1) or rapidPvstPlus(5).
OBJECT-TYPE    
  Integer32 0..65535  

stpxLoopInconsistencyPortIndex 1.3.6.1.4.1.9.9.82.1.8.2.1.2
The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
OBJECT-TYPE    
  Integer32 1..65535  

stpxLoopInconsistencyState 1.3.6.1.4.1.9.9.82.1.8.2.1.3
Indicates whether the port on a particular Spanning Tree instance is currently in loop-inconsistent state or not.
OBJECT-TYPE    
  TruthValue  

stpxLoopGuardGlobalDefaultMode 1.3.6.1.4.1.9.9.82.1.8.3
Indicates the global default config mode of LoopGuard feature on the device.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

stpxFastStartBpduGuardEnable 1.3.6.1.4.1.9.9.82.1.9.1
Indicates the global default mode of the Bpdu Guard feature on the device. On platforms that does not support per port Bpdu Guard configuration as indicated by the object stpxFastStartPortBpduGuardMode, if the value of this object is set to true(1), and the Fast Start Feature is operationally enabled on a port, then that port will be immediately disabled when the system receives a BPDU from that port.
OBJECT-TYPE    
  TruthValue  

stpxFastStartBpduFilterEnable 1.3.6.1.4.1.9.9.82.1.9.2
Indicates the global default mode of the Bpdu Filter feature on the device. On platforms that does not support per port Bpdu Filter configuration as indicated by the object stpxFastStartPortBpduFilterMode, if the value of this object is set to true(1), and the Fast Start Feature is operationally enabled on a port, then no BPDUs will be transmitted on this port.
OBJECT-TYPE    
  TruthValue  

stpxFastStartPortTable 1.3.6.1.4.1.9.9.82.1.9.3
A table containing a list of the bridge ports for which Spanning Tree Port Fast Start can be configured.
OBJECT-TYPE    
  SEQUENCE OF  
    StpxFastStartPortEntry

stpxFastStartPortEntry 1.3.6.1.4.1.9.9.82.1.9.3.1
A bridge port for which Spanning Tree Port Fast Start can be configured.
OBJECT-TYPE    
  StpxFastStartPortEntry  

stpxFastStartPortIndex 1.3.6.1.4.1.9.9.82.1.9.3.1.1
The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
OBJECT-TYPE    
  Integer32 1..65535  

stpxFastStartPortEnable 1.3.6.1.4.1.9.9.82.1.9.3.1.2
Indicates whether the port is operating in spantree fast start mode. A port with fast start enabled is immediately put in spanning tree forwarding state when that port is detected by the Spanning Tree, rather than starting in blocking state which is the normal operation. In order to support additional Fast Start enable mode (enableForTrunk and default) as defined in stpxFastStartPortMode other than enable (true(1)) or disable (false(2)) as defined in this object, stpxFastStartPortMode object needs to be used. When the stpxFastStartPortMode has the value of enable(1) or enableForTrunk(3), the value of stpxFastStartPortEnable for the same instance will be true(1). When the stpxFastStartPortMode has the value of disable(2), the value of stpxFastStartPortEnable for the same instance will be false(2). When the stpxFastStartPortMode has the value of default(4), the value of stpxFastStartPortEnable for the same instance depends on the object value of stpxFastStartGlobalDefaultMode.
OBJECT-TYPE    
  TruthValue  

stpxFastStartPortMode 1.3.6.1.4.1.9.9.82.1.9.3.1.3
Indicates the mode of Fast Start Feature on the port. A port with fast start enabled is immediately put in spanning tree forwarding state when the port is detected by the Spanning Tree, rather than starting in blocking state which is the normal operation. enable -- the fast start feature is enabled on this port but will only take effect when the object value of its vlanTrunkPortDynamicStatus as specified in CISCO-VTP-MIB is notTrunking(2). disable -- the fast start feature is disabled on this port. enableForTrunk -- the fast start feature is enabled on this port and will take effect regardless of the object value of its vlanTrunkPortDynamicStatus. default -- whether the fast start feature is enabled or not on this port depends on the object value of stpxFastStartGlobalDefaultMode. network -- the fast start network mode is enabled on this port.
OBJECT-TYPE    
  INTEGER enable(1), disable(2), enableForTrunk(3), default(4), network(5)  

stpxFastStartPortBpduGuardMode 1.3.6.1.4.1.9.9.82.1.9.3.1.4
Indicates the mode of Bpdu Guard Feature on the port. A port with Bpdu Guard enabled is immediately disabled when the system receives a BPDU from that port. enable -- the Bpdu Guard feature is enabled on this port. disable -- the Bpdu Guard feature is disabled on this port. default -- whether the Bpdu Guard feature is enabled or not on this port depends on the object value of stpxFastStartBpduGuardEnable. If the value of stpxFastStartBpduGuardEnable is true(1) and Fast Start feature is also enabled operationally on this port, then this port is immediately disabled when the system receives a BPDU from this port.
OBJECT-TYPE    
  INTEGER enable(1), disable(2), default(3)  

stpxFastStartPortBpduFilterMode 1.3.6.1.4.1.9.9.82.1.9.3.1.5
Indicates the mode of Bpdu Filter Feature on the port. The system will not transmit BPDUs on a port with Bpdu Filter feature enabled. enable -- the Bpdu Filter feature is enabled on this port. disable -- the Bpdu Filter feature is disabled on this port. default -- whether the Bpdu Filter feature is enabled or not on this port depends on the object value of stpxFastStartBpduFilterEnable. If the value of stpxFastStartBpduFilterEnable is true(1) and Fast Start feature is also enabled operationally on this port, then no BPDUs will be transmitted on this port.
OBJECT-TYPE    
  INTEGER enable(1), disable(2), default(3)  

stpxFastStartGlobalDefaultMode 1.3.6.1.4.1.9.9.82.1.9.4
Indicates the global default mode of the Fast Start feature on the device.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

stpxFastStartOperModeTable 1.3.6.1.4.1.9.9.82.1.9.5
A table containing a list of the bridge ports for a particular Spanning Tree Instance.
OBJECT-TYPE    
  SEQUENCE OF  
    StpxFastStartOperModeEntry

stpxFastStartOperModeEntry 1.3.6.1.4.1.9.9.82.1.9.5.1
An entry with port fast start oper mode information on a bridge port for a particular Spanning Tree Instance.
OBJECT-TYPE    
  StpxFastStartOperModeEntry  

stpxFastStartOperModeInstIndex 1.3.6.1.4.1.9.9.82.1.9.5.1.1
The Spanning Tree instance id, such as the VLAN id of the VLAN if the object value of stpxSpanningTreeType is pvstPlus(1).
OBJECT-TYPE    
  Integer32 0..65535  

stpxFastStartOperModePortIndex 1.3.6.1.4.1.9.9.82.1.9.5.1.2
The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
OBJECT-TYPE    
  Integer32 1..65535  

stpxFastStartOperMode 1.3.6.1.4.1.9.9.82.1.9.5.1.3
Indicates the fast start operational status of the port on a particular Spanning Tree Instance.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

stpxBpduSkewingDetectionEnable 1.3.6.1.4.1.9.9.82.1.10.1
Indicates whether BPDU skewing detection feature is enabled or not on the system. If this object has the value of true(1), then the system will detect whether BPDUs received by any port on any Spanning Tree instance are processed at an interval longer than the object value of dot1dStpHelloTime in the BIRDGE-MIB of the Spanning Tree instance.
OBJECT-TYPE    
  TruthValue  

stpxBpduSkewingTable 1.3.6.1.4.1.9.9.82.1.10.2
A table containing a list of the bridge ports for which a particular Spanning Tree instance has been detected to have BPDU skewing occurred since the object value of stpxBpduSkewingDetectionEnable was last changed to true(1). The agent creates a new entry in this table whenever a port in a particular Spanning Tree instance is detected to be BPDU skewed since the object value of stpxBpduSkewingDetectionEnable object is changed to true(1). The agent deletes all the entries in this table when the object value of stpxBpduSkewingDetectionEnable is changed to false(2) or the object value of stpxSpanningTreeType is changed.
OBJECT-TYPE    
  SEQUENCE OF  
    StpxBpduSkewingEntry

stpxBpduSkewingEntry 1.3.6.1.4.1.9.9.82.1.10.2.1
A Spanning Tree instance on a particular port for which BPDU skewing has been detected.
OBJECT-TYPE    
  StpxBpduSkewingEntry  

stpxBpduSkewingInstanceIndex 1.3.6.1.4.1.9.9.82.1.10.2.1.1
The Spanning Tree instance id, such as the VLAN id of the VLAN if the object value of stpxSpanningTreeType is pvstPlus(1).
OBJECT-TYPE    
  Integer32 0..65535  

stpxBpduSkewingPortIndex 1.3.6.1.4.1.9.9.82.1.10.2.1.2
The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
OBJECT-TYPE    
  Integer32 1..65535  

stpxBpduSkewingLastSkewDuration 1.3.6.1.4.1.9.9.82.1.10.2.1.3
Indicates the skew duration in milliseconds of the last BPDU skewing detected.
OBJECT-TYPE    
  Unsigned32  

stpxBpduSkewingWorstSkewDuration 1.3.6.1.4.1.9.9.82.1.10.2.1.4
Indicates the skew duration in milliseconds of the worst BPDU skewing detected.
OBJECT-TYPE    
  Unsigned32  

stpxBpduSkewingWorstSkewTime 1.3.6.1.4.1.9.9.82.1.10.2.1.5
Indicates the value of sysUpTime when the worst BPDU skewing was detected.
OBJECT-TYPE    
  TimeStamp  

stpxMSTMaxInstanceNumber 1.3.6.1.4.1.9.9.82.1.11.1
The maximum MST (Multiple Spanning Tree) instance id, that can be supported by the device for Cisco proprietary implementation of the MST Protocol. This object is deprecated and replaced by stpxSMSTMaxInstanceID.
OBJECT-TYPE    
  Integer32 1..256  

stpxMSTRegionName 1.3.6.1.4.1.9.9.82.1.11.2
The operational MST region name.
OBJECT-TYPE    
  DisplayString Size(0..32)  

stpxMSTRegionRevision 1.3.6.1.4.1.9.9.82.1.11.3
The operational MST region version. This object is deprecated and replaced by stpxSMSTRegionRevision.
OBJECT-TYPE    
  Integer32 1..65535  

stpxMSTInstanceTable 1.3.6.1.4.1.9.9.82.1.11.4
This table contains MST instance information with one entry for an MST instance within the range of 0 to the object value of stpxMSTMaxInstanceNumber. This table is deprecated and replaced by stpxSMSTInstanceTable.
OBJECT-TYPE    
  SEQUENCE OF  
    StpxMSTInstanceEntry

stpxMSTInstanceEntry 1.3.6.1.4.1.9.9.82.1.11.4.1
A conceptual row containing the MST instance information.
OBJECT-TYPE    
  StpxMSTInstanceEntry  

stpxMSTInstanceIndex 1.3.6.1.4.1.9.9.82.1.11.4.1.1
An integer that uniquely identifies an MST instance within the range of 0 to the object value of stpxMSTMaxInstanceNumber. This object is deprecated and replaced by stpxSMSTInstanceIndex.
OBJECT-TYPE    
  Integer32 0..256  

stpxMSTInstanceVlansMapped 1.3.6.1.4.1.9.9.82.1.11.4.1.2
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is mapped to this MST instance, then the bit corresponding to that VLAN is set to '1'. This object is deprecated and replaced by stpxSMSTInstanceVlansMapped1k2k.
OBJECT-TYPE    
  STRING Size(0..128)  

stpxMSTInstanceVlansMapped2k 1.3.6.1.4.1.9.9.82.1.11.4.1.3
A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values of 1024 through 1031; the second octet to VLANs 1032 through 1039; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is mapped to this MST instance, then the bit corresponding to that VLAN is set to '1'. This object is deprecated and replaced by stpxSMSTInstanceVlansMapped1k2k.
OBJECT-TYPE    
  STRING Size(0..128)  

stpxMSTInstanceVlansMapped3k 1.3.6.1.4.1.9.9.82.1.11.4.1.4
A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is mapped to this MST instance, then the bit corresponding to that VLAN is set to '1'. This object is deprecated and replaced by stpxSMSTInstanceVlansMapped3k4k.
OBJECT-TYPE    
  STRING Size(0..128)  

stpxMSTInstanceVlansMapped4k 1.3.6.1.4.1.9.9.82.1.11.4.1.5
A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values of 3072 through 3079; the second octet to VLANs 3080 through 3087; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is mapped to this MST instance, then the bit corresponding to that VLAN is set to '1'. This object is deprecated and replaced by stpxSMSTInstanceVlansMapped3k4k.
OBJECT-TYPE    
  STRING Size(0..128)  

stpxMSTInstanceRemainingHopCount 1.3.6.1.4.1.9.9.82.1.11.4.1.6
The remaining hop count for this MST instance. This object will take on value of 40 if the object value of stpxSMSTInstanceRemainingHopCount is greater than 40. This object is only instantiated when the object value of stpxSpanningTreeType is mst(4). This object is deprecated and replaced by stpxSMSTInstanceRemainingHopCount.
OBJECT-TYPE    
  Integer32 0..40  

stpxMSTRegionEditBufferStatus 1.3.6.1.4.1.9.9.82.1.11.5
Indicates the current ownership status of the unique Region Config Edit Buffer. released -- the Edit Buffer can be acquired by any of the SNMP management stations. acquiredBySnmp -- the Edit Buffer is acquired by any of the SNMP management stations. acquiredByNonSnmp -- the Edit Buffer is acquired by the non-SNMP users managing the device.
OBJECT-TYPE    
  INTEGER released(1), acquiredBySnmp(2), acquiredByNonSnmp(3)  

stpxMSTRegionEditBufferOperation 1.3.6.1.4.1.9.9.82.1.11.6
Indicates the operation that is performed on the Region Config Edit Buffer. other -- none of the following operations. acquire -- acquire the Edit Buffer. This operation can only be performed when the object stpxMSTRegionEditBufferStatus has the value of released(1). After the successful operation of this action, the stpxMSTRegionEditBufferStatus will be changed to acquiredBySnmp(2). releaseWithForce -- release the Edit Buffer acquired by non-SNMP users with force and discard the changes in the Edit Buffer. This operation can only be performed when the object stpxMSTRegionEditBufferStatus has the value of acquiredByNonSnmp(2). commit -- commit the changes in the Edit Buffer and release the Edit Buffer. The successful operation of this action will make the changes in the Edit Buffer effective on the device. This operation can only be performed when the object stpxMSTRegionEditBufferStatus has the value of acquiredBySnmp(3). rollBack -- discard the changes in the Edit Buffer and release the Edit Buffer. This operation can only be performed when the object stpxMSTRegionEditBufferStatus has the value of acquiredBySnmp(3). This object always returns other(1) when it is read.
OBJECT-TYPE    
  INTEGER other(1), acquire(2), releaseWithForce(3), commit(4), rollBack(5)  

stpxMSTRegionEditName 1.3.6.1.4.1.9.9.82.1.11.7
The MST region name in the Edit Buffer. This object is only instantiated when the stpxMSTRegionEditBufferStatus has the value of acquiredBySnmp(2).
OBJECT-TYPE    
  DisplayString Size(0..32)  

stpxMSTRegionEditRevision 1.3.6.1.4.1.9.9.82.1.11.8
The MST region version in the Edit Buffer. This object is only instantiated when the stpxMSTRegionEditBufferStatus has the value of acquiredBySnmp(2). This object is deprecated and replaced by stpxSMSTRegionEditRevision.
OBJECT-TYPE    
  Integer32 1..65535  

stpxMSTInstanceEditTable 1.3.6.1.4.1.9.9.82.1.11.9
This table contains MST instance information in the Edit Buffer with one entry for each MST instance numbered from 0 to stpxMSTMaxInstanceNumber. This table is only instantiated when the stpxMSTRegionEditBufferStatus has the value of acquiredBySnmp(2). This table is deprecated and replaced by stpxSMSTInstanceEditTable.
OBJECT-TYPE    
  SEQUENCE OF  
    StpxMSTInstanceEditEntry

stpxMSTInstanceEditEntry 1.3.6.1.4.1.9.9.82.1.11.9.1
A conceptual row containing MST instance information in the Edit Buffer.
OBJECT-TYPE    
  StpxMSTInstanceEditEntry  

stpxMSTInstanceEditIndex 1.3.6.1.4.1.9.9.82.1.11.9.1.1
An integer that uniquely identifies an MST instance from 0 to the object value of stpxMSTMaxInstanceNumber. The instances of this table entry with stpxMSTInstanceEditIndex of zero can not be modified. This object is deprecated and replaced by stpxSMSTInstanceEditIndex.
OBJECT-TYPE    
  Integer32 0..256  

stpxMSTInstanceEditVlansMap 1.3.6.1.4.1.9.9.82.1.11.9.1.2
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is mapped to this MST instance, then the bit corresponding to that VLAN is set to '1'. Each VLAN can only be mapped to one unique MST instance in the range from 1 to stpxMSTMaxInstanceNumber. If the bit corresponding to a VLAN is changed from '1' to '0', then that VLAN will be automatically mapped to MST instance 0 by the device. This object is deprecated and replaced by stpxSMSTInstanceEditVlansMap1k2k.
OBJECT-TYPE    
  STRING Size(0..128)  

stpxMSTInstanceEditVlansMap2k 1.3.6.1.4.1.9.9.82.1.11.9.1.3
A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values of 1024 through 1031; the second octet to VLANs 1032 through 1039; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is mapped to this MST instance, then the bit corresponding to that VLAN is set to '1'. Each VLAN can only be mapped to one unique MST instance in the range from 1 to stpxMSTMaxInstanceNumber. If the bit corresponding to a VLAN is changed from '1' to '0', then that VLAN will be automatically mapped to MST instance 0 by the device. This object is deprecated and replaced by stpxSMSTInstanceEditVlansMap1k2k.
OBJECT-TYPE    
  STRING Size(0..128)  

stpxMSTInstanceEditVlansMap3k 1.3.6.1.4.1.9.9.82.1.11.9.1.4
A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is mapped to this MST instance, then the bit corresponding to that VLAN is set to '1'. Each VLAN can only be mapped to one unique MST instance in the range from 1 to stpxMSTMaxInstanceNumber. If the bit corresponding to a VLAN is changed from '1' to '0', then that VLAN will be automatically mapped to MST instance 0 by the device. This object is deprecated and replaced by stpxSMSTInstanceEditVlansMap3k4k.
OBJECT-TYPE    
  STRING Size(0..128)  

stpxMSTInstanceEditVlansMap4k 1.3.6.1.4.1.9.9.82.1.11.9.1.5
A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values of 3072 through 3079; the second octet to VLANs 3080 through 3087; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is mapped to this MST instance, then the bit corresponding to that VLAN is set to '1'. Each VLAN can only be mapped to one unique MST instance in the range from 1 to stpxMSTMaxInstanceNumber. If the bit corresponding to a VLAN is changed from '1' to '0', then that VLAN will be automatically mapped to MST instance 0 by the device. This object is deprecated and replaced by stpxSMSTInstanceEditVlansMap3k4k.
OBJECT-TYPE    
  STRING Size(0..128)  

stpxPreferredMSTInstancesTable 1.3.6.1.4.1.9.9.82.1.11.10
The table containing indications of which MST instances are preferred on which trunk ports. The preferred MST instances on a trunk port have a lower Path Cost value compared with the MST instances on the trunk not in the preferred list.
OBJECT-TYPE    
  SEQUENCE OF  
    StpxPreferredMSTInstancesEntry

stpxPreferredMSTInstancesEntry 1.3.6.1.4.1.9.9.82.1.11.10.1
An entry indicating which MST instances are preferred on a specific trunk port.
OBJECT-TYPE    
  StpxPreferredMSTInstancesEntry  

stpxPreferredMSTInstancesMap 1.3.6.1.4.1.9.9.82.1.11.10.1.1
A string of octets containing one bit per MST instances on this trunk port. The first octet corresponds to MST instances of 0 through 7; the second octet to MST instances 8 through 15; etc. The most significant bit of each octet corresponds to the lowest MST instance value in that octet. The number of bits for this mib object will be determined by the value of stpxMSTMaxInstanceNumber. For each instance, if it is preferred on this trunk port, then the bit corresponding to that instance is set to '1'.
OBJECT-TYPE    
  STRING Size(1..32)  

stpxMSTPortTable 1.3.6.1.4.1.9.9.82.1.11.11
A table containing port information for the MST Protocol on all the bridge ports existing on the system.
OBJECT-TYPE    
  SEQUENCE OF  
    StpxMSTPortEntry

stpxMSTPortEntry 1.3.6.1.4.1.9.9.82.1.11.11.1
An entry with port information for the MST Protocol on a bridge port.
OBJECT-TYPE    
  StpxMSTPortEntry  

stpxMSTPortIndex 1.3.6.1.4.1.9.9.82.1.11.11.1.1
The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
OBJECT-TYPE    
  Integer32 1..65535  

stpxMSTPortAdminLinkType 1.3.6.1.4.1.9.9.82.1.11.11.1.2
Indicates the administrative link type configuration of a bridge port for the MST protocol. pointToPoint -- the port is administratively configured to be connected to a point-to-point link. shared -- the port is administratively configured to be connected to a shared medium. auto -- the administrative configuration of the port's link type depends on link duplex of the port. If the port link is full-duplex, the administrative link type configuration on this port will be taken as pointTopoint(1). If the port link is half-duplex, the administrative link type configuration on this port will be taken as shared(2). This configuration of this object only takes effect when the stpxSpanningTreeType is mst(4) or rapidPvstPlus(5). stpxMSTPortAdminLinkType is deprecated and replaced with stpxRSTPPortAdminLinkType.
OBJECT-TYPE    
  INTEGER pointToPoint(1), shared(2), auto(3)  

stpxMSTPortOperLinkType 1.3.6.1.4.1.9.9.82.1.11.11.1.3
Indicates the operational link type of a bridge port for the MST protocol. pointToPoint -- the port is operationally connected to a point-to-point link. shared -- the port is operationally connected to a shared medium. other -- none of the above. This object is only instantiated when the object value of stpxSpanningTreeType is mst(4). stpxMSTPortOperLinkType is deprecated and replaced with stpxRSTPPortOperLinkType.
OBJECT-TYPE    
  INTEGER pointToPoint(1), shared(2), other(3)  

stpxMSTPortProtocolMigration 1.3.6.1.4.1.9.9.82.1.11.11.1.4
The protocol migration control on this port. When the object value of stpxSpanningTreeType is mst(4) or rapidPvstPlus(5), setting true(1) to this object forces the device to try using version 2 BPDUs on this port. When the object value of stpxSpanningTreeType is neither mst(4) nor rapidPvstPlus(5), setting true(1) to this object has no effect. Setting false(2) to this object has no effect. This object always returns false(2) when read. stpxMSTPortProtocolMigration is deprecated and replaced with stpxRSTPPortProtocolMigration.
OBJECT-TYPE    
  TruthValue  

stpxMSTPortStatus 1.3.6.1.4.1.9.9.82.1.11.11.1.5
Indicates the operational status of the port for the MST protocol. edge -- this port is an edge port for the MST region. boundary -- this port is a boundary port for the MST region. pvst -- this port is connected to a PVST/PVST+ bridge. stp -- this port is connected to a Single Spanning Tree bridge. This object is only instantiated when the object value of stpxSpanningTreeType is mst(4). This object is deprecated and replaced by stpxSMSTPortStatus.
OBJECT-TYPE    
  BITS edge(0), boundary(1), pvst(2), stp(3)  

stpxMSTPortRoleTable 1.3.6.1.4.1.9.9.82.1.11.12
A table containing a list of the bridge ports for a particular MST instance. This table is only instantiated when the stpxSpanningTreeType is mst(4). This table is deprecated and replaced with stpxRSTPPortRoleTable.
OBJECT-TYPE    
  SEQUENCE OF  
    StpxMSTPortRoleEntry

stpxMSTPortRoleEntry 1.3.6.1.4.1.9.9.82.1.11.12.1
An entry containing the port role information for the MST protocol on a port for a particular MST instance existing on the system.
OBJECT-TYPE    
  StpxMSTPortRoleEntry  

stpxMSTPortRoleInstanceIndex 1.3.6.1.4.1.9.9.82.1.11.12.1.1
The MST instance id within the range of 0 to stpxMSTMaxInstanceNumber.
OBJECT-TYPE    
  Integer32 0..256  

stpxMSTPortRolePortIndex 1.3.6.1.4.1.9.9.82.1.11.12.1.2
The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
OBJECT-TYPE    
  Integer32 1..65535  

stpxMSTPortRoleValue 1.3.6.1.4.1.9.9.82.1.11.12.1.3
Indicates the port role on a particular MST instance for the MST protocol. disabled -- this port has no role on this MST instance. root -- this port has the role of root port on this MST instance. designated -- this port has the role of designated port on this MST instance. alternate -- this port has the role of alternate port on this MST instance. backUp -- this port has the role of backup port on this MST instance. boundary -- this port has the role of boundary port on this MST instance. master -- this port has the role of master port on this MST instance.
OBJECT-TYPE    
  INTEGER disabled(1), root(2), designated(3), alternate(4), backUp(5), boundary(6), master(7)  

stpxMSTMaxHopCount 1.3.6.1.4.1.9.9.82.1.11.13
The maximum number of hops for the MST region. This object will take on value of 40 if the object value of stpxSMSTMaxHopCount is greater than 40. This object is deprecated and replaced by stpxSMSTMaxHopCount.
OBJECT-TYPE    
  Integer32 1..40  

stpxRSTPPortTable 1.3.6.1.4.1.9.9.82.1.12.1
A table containing port information for the RSTP Protocol on all the bridge ports existing in the system.
OBJECT-TYPE    
  SEQUENCE OF  
    StpxRSTPPortEntry

stpxRSTPPortEntry 1.3.6.1.4.1.9.9.82.1.12.1.1
An entry with port information for the RSTP Protocol on a bridge port.
OBJECT-TYPE    
  StpxRSTPPortEntry  

stpxRSTPPortIndex 1.3.6.1.4.1.9.9.82.1.12.1.1.1
The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
OBJECT-TYPE    
  Integer32 1..65535  

stpxRSTPPortAdminLinkType 1.3.6.1.4.1.9.9.82.1.12.1.1.2
Indicates the administrative link type configuration of a bridge port for the RSTP protocol. pointToPoint -- the port is administratively configured to be connected to a point-to-point link. shared -- the port is administratively configured to be connected to a shared medium. auto -- the administrative configuration of the port's link type depends on link duplex of the port. If the port link is full-duplex, the administrative link type configuration on this port will be taken as pointTopoint(1). If the port link is half-duplex, the administrative link type configuration on this port will be taken as shared(2). This configuration of this object only takes effect when the stpxSpanningTreeType is mst(4) or rapidPvstPlus(5).
OBJECT-TYPE    
  INTEGER pointToPoint(1), shared(2), auto(3)  

stpxRSTPPortOperLinkType 1.3.6.1.4.1.9.9.82.1.12.1.1.3
Indicates the operational link type of a bridge port for the RSTP protocol. pointToPoint -- the port is operationally connected to a point-to-point link. shared -- the port is operationally connected to a shared medium. other -- none of the above. This object is only instantiated when the object value of stpxSpanningTreeType is mst(4) or rapidPvstPlus(5).
OBJECT-TYPE    
  INTEGER pointToPoint(1), shared(2), other(3)  

stpxRSTPPortProtocolMigration 1.3.6.1.4.1.9.9.82.1.12.1.1.4
The protocol migration control on this port. When the object value of stpxSpanningTreeType is mst(4) or rapidPvstPlus(5), setting true(1) to this object forces the device to try using version 2 BPDUs on this port. When the object value of stpxSpanningTreeType is neither mst(4) nor rapidPvstPlus(5), setting true(1) to this object has no effect. Setting false(2) to this object has no effect. This object always returns false(2) when read.
OBJECT-TYPE    
  TruthValue  

stpxRSTPPortRoleTable 1.3.6.1.4.1.9.9.82.1.12.2
A table containing a list of the bridge ports for a particular Spanning Tree instance. This table is only instantiated when the stpxSpanningTreeType is mst(4) or rapidPvstPlus(5).
OBJECT-TYPE    
  SEQUENCE OF  
    StpxRSTPPortRoleEntry

stpxRSTPPortRoleEntry 1.3.6.1.4.1.9.9.82.1.12.2.1
An entry containing the port role information for the RSTP protocol on a port for a particular Spanning Tree instance.
OBJECT-TYPE    
  StpxRSTPPortRoleEntry  

stpxRSTPPortRoleInstanceIndex 1.3.6.1.4.1.9.9.82.1.12.2.1.1
The Spanning Tree instance id, it can either be a VLAN number if the stpxSpanningTreeType is rapidPvstPlus(5) or an MST instance id if the stpxSpanningTreeType is mst(4).
OBJECT-TYPE    
  Integer32 0..4095  

stpxRSTPPortRolePortIndex 1.3.6.1.4.1.9.9.82.1.12.2.1.2
The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
OBJECT-TYPE    
  Integer32 1..65535  

stpxRSTPPortRoleValue 1.3.6.1.4.1.9.9.82.1.12.2.1.3
Indicates the port role on a particular Spanning Tree instance for the RSTP protocol. disabled -- this port has no role in this Spanning Tree instance. root -- this port has the role of root port in this Spanning Tree instance. designated -- this port has the role of designated port in this Spanning Tree instance. alternate -- this port has the role of alternate port in this Spanning Tree instance. backUp -- this port has the role of backup port in this Spanning Tree instance. boundary -- this port has the role of boundary port in this Spanning Tree instance. master -- this port has the role of master port in this Spanning Tree instance. This object could have a value of 'boundary' or 'master' only when the object value of stpxSpanningTreeType is mst(4).
OBJECT-TYPE    
  INTEGER disabled(1), root(2), designated(3), alternate(4), backUp(5), boundary(6), master(7)  

stpxRSTPTransmitHoldCount 1.3.6.1.4.1.9.9.82.1.12.3
The Transmit Hold Count.
OBJECT-TYPE    
  Unsigned32  

stpxRPVSTPortTable 1.3.6.1.4.1.9.9.82.1.13.1
A table containing a list of the bridge ports for a particular Spanning Tree Instance. This table is only instantiated when the object value of stpxSpanningTreeType is rapidPvstPlus(5).
OBJECT-TYPE    
  SEQUENCE OF  
    StpxRPVSTPortEntry

stpxRPVSTPortEntry 1.3.6.1.4.1.9.9.82.1.13.1.1
An entry with port status information on a bridge port for a particular Spanning Tree Instance.
OBJECT-TYPE    
  StpxRPVSTPortEntry  

stpxRPVSTPortVlanIndex 1.3.6.1.4.1.9.9.82.1.13.1.1.1
The VLAN id of the VLAN.
OBJECT-TYPE    
  VlanIndex  

stpxRPVSTPortIndex 1.3.6.1.4.1.9.9.82.1.13.1.1.2
The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
OBJECT-TYPE    
  Integer32 1..65535  

stpxRPVSTPortStatus 1.3.6.1.4.1.9.9.82.1.13.1.1.3
Indicates the operational status of the port for the Rapid PVST+ protocol. edge -- this port is an edge port for the RST region. unused1 -- unused bit 1. unused2 -- unused bit 2. stp -- this port is connected to a Single Spanning Tree/PVST+ bridge. dispute -- this port, as a designated port, received an inferior BPDU with a designated role and the learning bit being set.
OBJECT-TYPE    
  BITS edge(0), unused1(1), unused2(2), stp(3), dispute(4)  

stpxSMSTMaxInstances 1.3.6.1.4.1.9.9.82.1.14.1
The maximum number of MST instances that can be supported by the device for IEEE MST.
OBJECT-TYPE    
  Unsigned32  

stpxSMSTMaxInstanceID 1.3.6.1.4.1.9.9.82.1.14.2
The maximum MST instance ID that can be supported by the device for IEEE MST.
OBJECT-TYPE    
  Unsigned32  

stpxSMSTRegionRevision 1.3.6.1.4.1.9.9.82.1.14.3
The operational region version for IEEE MST.
OBJECT-TYPE    
  Unsigned32  

stpxSMSTRegionEditRevision 1.3.6.1.4.1.9.9.82.1.14.4
The MST region version in the Edit Buffer for IEEE MST. This object is only instantiated when the stpxMSTRegionEditBufferStatus has the value of acquiredBySnmp(2).
OBJECT-TYPE    
  Unsigned32  

stpxSMSTInstanceTable 1.3.6.1.4.1.9.9.82.1.14.5
This table contains MST instance information for IEEE MST.
OBJECT-TYPE    
  SEQUENCE OF  
    StpxSMSTInstanceEntry

stpxSMSTInstanceEntry 1.3.6.1.4.1.9.9.82.1.14.5.1
A conceptual row containing the MST instance information for IEEE MST.
OBJECT-TYPE    
  StpxSMSTInstanceEntry  

stpxSMSTInstanceIndex 1.3.6.1.4.1.9.9.82.1.14.5.1.1
The MST instance ID, the value of which is in the range from 0 to stpxSMSTMaxInstanceID.
OBJECT-TYPE    
  Unsigned32  

stpxSMSTInstanceVlansMapped1k2k 1.3.6.1.4.1.9.9.82.1.14.5.1.2
A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 0 through 2047. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is mapped to this MST instance, then the bit corresponding to that VLAN is set to '1'. If the length of this string is less than 256 octets, any 'missing' octets are assumed to contain the value of zero.
OBJECT-TYPE    
  STRING Size(0..256)  

stpxSMSTInstanceVlansMapped3k4k 1.3.6.1.4.1.9.9.82.1.14.5.1.3
A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 4095. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is mapped to this MST instance, then the bit corresponding to that VLAN is set to '1'. If the length of this string is less than 256 octets, any 'missing' octets are assumed to contain the value of zero.
OBJECT-TYPE    
  STRING Size(0..256)  

stpxSMSTInstanceRemainingHopCount 1.3.6.1.4.1.9.9.82.1.14.5.1.4
The remaining hop count for this MST instance. If this object value is not applicable on an MST instance, then the value retrieved for this object for that MST instance will be -1. This object is only instantiated when the object value of stpxSpanningTreeType is mst(4).
OBJECT-TYPE    
  Integer32 -1..2147483647  

stpxSMSTInstanceCISTRegionalRoot 1.3.6.1.4.1.9.9.82.1.14.5.1.5
Indicates the Bridge Identifier (refer to BridgeId defined in BRIDGE-MIB) of CIST (Common and Internal Spanning Tree) Regional Root for the MST region. This object is only instantiated when the object value of stpxSpanningTreeType is mst(4) and stpxSMSTInstanceIndex is 0.
OBJECT-TYPE    
  STRING Size(8)  

stpxSMSTInstanceCISTIntRootCost 1.3.6.1.4.1.9.9.82.1.14.5.1.6
Indicates the CIST Internal Root Path Cost, i.e., the path cost to the CIST Regional Root as specified by the corresponding stpxSMSTInstanceCISTRegionalRoot for the MST region. This object is only instantiated when the object value of stpxSpanningTreeType is mst(4) and stpxSMSTInstanceIndex is 0.
OBJECT-TYPE    
  Unsigned32  

stpxSMSTInstanceEditTable 1.3.6.1.4.1.9.9.82.1.14.6
This table contains MST instance information in the Edit Buffer. This table is only instantiated when the object value of stpxMSTRegionEditBufferStatus has the value of acquiredBySnmp(2).
OBJECT-TYPE    
  SEQUENCE OF  
    StpxSMSTInstanceEditEntry

stpxSMSTInstanceEditEntry 1.3.6.1.4.1.9.9.82.1.14.6.1
A conceptual row containing MST instance information in the Edit Buffer. The total number of entries in this table has to be less than or equal to the object value of stpxSMSTMaxInstances.
OBJECT-TYPE    
  StpxSMSTInstanceEditEntry  

stpxSMSTInstanceEditIndex 1.3.6.1.4.1.9.9.82.1.14.6.1.1
The MST instance ID, the value of which is in the range from 0 to stpxSMSTMaxInstanceID. The instances of this table entry with stpxSMSTInstanceEditIndex of zero is automatically created by the device and can not modified.
OBJECT-TYPE    
  Unsigned32  

stpxSMSTInstanceEditVlansMap1k2k 1.3.6.1.4.1.9.9.82.1.14.6.1.2
A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 0 through 2047. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is mapped to this MST instance, then the bit corresponding to that VLAN is set to '1'. Each VLAN can only be mapped to one unique MST instance with the range from 0 to stpxSMSTMaxInstanceNumber. If the bit corresponding to a VLAN is changed from '1' to '0', then that VLAN will be automatically mapped to SMST instance 0 by the device. If the bit corresponding to a VLAN is changed from '0' to '1', then that VLAN will be automatically removed from the MST instance this VLAN was previously mapped to. If the length of this string is less than 256 octets, any 'missing' octets are assumed to contain the value of zero.
OBJECT-TYPE    
  STRING Size(0..256)  

stpxSMSTInstanceEditVlansMap3k4k 1.3.6.1.4.1.9.9.82.1.14.6.1.3
A string of octets containing one bit per VLAN for VLANS with VlanIndex values of 2048 through 4095. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. For each VLAN, if it is mapped to this MST instance, then the bit corresponding to that VLAN is set to '1'. Each VLAN can only be mapped to one unique MST instance with the range from 0 to stpxSMSTMaxInstanceNumber. If the bit corresponding to a VLAN is changed from '1' to '0', then that VLAN will be automatically mapped to SMST instance 0 by the device. If the bit corresponding to a VLAN is changed from '0' to '1', then that VLAN will be automatically removed from the MST instance this VLAN was previously mapped to. If the length of this string is less than 256 octets, any 'missing' octets are assumed to contain the value of zero.
OBJECT-TYPE    
  STRING Size(0..256)  

stpxSMSTInstanceEditRowStatus 1.3.6.1.4.1.9.9.82.1.14.6.1.4
This object controls the creation and deletion of a row in stpxSMSTInstanceEditTable. When creating an entry in this table, 'createAndGo' method is used and the value of this object is set to 'active'. Deactivation of an 'active' entry is not allowed. When deleting an entry in this table, 'destroy' method is used. Once a row becomes active, value in any other column within such a row may be modified. When a row is active, setting the instance of stpxSMSTInstanceEditVlansMap1k2k stpxSMSTInstanceEditVlansMap3k4k for the same MST instance both to the value of zero length can not be allowed.
OBJECT-TYPE    
  RowStatus  

stpxSMSTPortTable 1.3.6.1.4.1.9.9.82.1.14.7
A table containing port information for the MST Protocol on all the bridge ports existing on the system. This table is only instantiated when the object value of stpxSpanningTreeType is mst(4)
OBJECT-TYPE    
  SEQUENCE OF  
    StpxSMSTPortEntry

stpxSMSTPortEntry 1.3.6.1.4.1.9.9.82.1.14.7.1
An entry with port information for the MST protocol on a bridge port.
OBJECT-TYPE    
  StpxSMSTPortEntry  

stpxSMSTPortIndex 1.3.6.1.4.1.9.9.82.1.14.7.1.1
The value of dot1dBasePort (i.e. dot1dBridge.1.4) for the bridge port.
OBJECT-TYPE    
  Integer32 1..65535  

stpxSMSTPortStatus 1.3.6.1.4.1.9.9.82.1.14.7.1.2
Indicates the operational status of the port for the MST protocol. edge -- this port is an edge port for the MST region. boundary -- this port is a boundary port for the MST region. pvst -- this port is connected to a PVST/PVST+ bridge. stp -- this port is connected to a Single Spanning Tree bridge. dispute -- this port, as a designated port, received an inferior BPDU with a designated role and the learning bit being set. rstp -- this port is connected to a RSTP bridge or an MST bridge in a different MST region.
OBJECT-TYPE    
  BITS edge(0), boundary(1), pvst(2), stp(3), dispute(4), rstp(5)  

stpxSMSTPortAdminHelloTime 1.3.6.1.4.1.9.9.82.1.14.7.1.3
The adminitratively configured hello time in hundredth of seconds on a port for IEEE MST. The granularity of this timer is 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. This object value of zero means the hello time is not specifically configured on this port and object value of stpxSMSTPortConfigedHelloTime retrieved for this port will take on the value of dot1dStpBridgeHelloTime defined in BRIDGE-MIB.
OBJECT-TYPE    
  Unsigned32  

stpxSMSTPortConfigedHelloTime 1.3.6.1.4.1.9.9.82.1.14.7.1.4
Indicates the effective configuration of the hello time on a port.
OBJECT-TYPE    
  Unsigned32  

stpxSMSTPortOperHelloTime 1.3.6.1.4.1.9.9.82.1.14.7.1.5
The operational hello time in hundredth of seconds on a port for IEEE MST. If this object value is not applicable on a port, then the value retrieved on that port will be -1.
OBJECT-TYPE    
  Integer32 -1..2147483647  

stpxSMSTPortAdminMSTMode 1.3.6.1.4.1.9.9.82.1.14.7.1.6
The desired MST mode of this port. preStandard -- this port is administratively configured to transmit pre-standard, i.e. pre IEEE MST, BPDUs. auto -- the BPDU transmission mode of this port is based on automatic detection of neighbor ports.
OBJECT-TYPE    
  INTEGER preStandard(1), auto(2)  

stpxSMSTPortOperMSTMode 1.3.6.1.4.1.9.9.82.1.14.7.1.7
Indicates the current operational MST mode of this port. unknown -- the operational mode is currently unknown. preStandard -- this port is currently operating in pre-standard MSTP BPDU transmission mode. standard -- this port is currently operating in IEEE MST BPDU transmission mode.
OBJECT-TYPE    
  INTEGER unknown(1), preStandard(2), standard(3)  

stpxSMSTMaxHopCount 1.3.6.1.4.1.9.9.82.1.14.8
The maximum number of hops for the IEEE MST region.
OBJECT-TYPE    
  Unsigned32  

stpxSMSTConfigDigest 1.3.6.1.4.1.9.9.82.1.14.9
The IEEE MST region configuration digest.
OBJECT-TYPE    
  StpxMSTConfigurationDigest  

stpxSMSTConfigPreStandardDigest 1.3.6.1.4.1.9.9.82.1.14.10
The pre-standard MST region configuration digest.
OBJECT-TYPE    
  StpxMSTConfigurationDigest  

stpxNotificationsPrefix 1.3.6.1.4.1.9.9.82.2.0
OBJECT IDENTIFIER    

stpxInconsistencyUpdate 1.3.6.1.4.1.9.9.82.2.0.1
A stpxPortInconsistencyUpdate notification is sent by a bridge when an instance of stpxInconsistentState is created or destroyed. That is, when an inconsistency is discovered in the VLAN's Spanning Tree for a particular port, or when such an inconsistency disappears. Note that the trap is not sent if the port transitions between different types of inconsistency. The stpxInconsistentState value indicates the type of inconsistency which now exists/no longer exists for the relevant VLAN on the relevant port.
NOTIFICATION-TYPE    

stpxRootInconsistencyUpdate 1.3.6.1.4.1.9.9.82.2.0.2
A stpxRootInconsistencyUpdate notification is sent by a bridge when an instance of stpxRootInconsistencyState is created or destroyed. That is, when an root-inconsistency is discovered in the VLAN's or instance's Spanning Tree for a particular port, or when such an root-inconsistency disappears. For creation, the value of stpxRootInconsistencyState in the notification is true(1); for deletion, the value is false(2). The object value of stpxSpanningTreeType indicates which Spanning Tree protocol is running when an instance of stpxRootInconsistencyState is created or destroyed.
NOTIFICATION-TYPE    

stpxLoopInconsistencyUpdate 1.3.6.1.4.1.9.9.82.2.0.3
A stpxLoopInconsistencyUpdate notification is sent by a bridge when an instance of stpxLoopInconsistencyState is created or destroyed. That is, when an loop-inconsistency is discovered in the VLAN's or instance's Spanning Tree for a particular port, or when such an loop-inconsistency disappears. For creation, the value of stpxLoopInconsistencyState in the notification is true(1); for deletion, the value is false(2). The object value of stpxSpanningTreeType indicates which Spanning Tree protocol is running when an instance of stpxLoopInconsistencyState is created or destroyed.
NOTIFICATION-TYPE    

stpxMIBConformance 1.3.6.1.4.1.9.9.82.3
OBJECT IDENTIFIER    

stpxMIBCompliances 1.3.6.1.4.1.9.9.82.3.1
OBJECT IDENTIFIER    

stpxMIBGroups 1.3.6.1.4.1.9.9.82.3.2
OBJECT IDENTIFIER    

stpxMIBCompliance 1.3.6.1.4.1.9.9.82.3.1.1
The notifications which a STP extension implementation required to implement.
MODULE-COMPLIANCE    

stpxMIBCompliance2 1.3.6.1.4.1.9.9.82.3.1.2
This group is mandatory for implementations of the BackboneFast capability.
MODULE-COMPLIANCE    

stpxMIBCompliance3 1.3.6.1.4.1.9.9.82.3.1.3
This group must be implemented by the entities that support MISTP.
MODULE-COMPLIANCE    

stpxMIBCompliance4 1.3.6.1.4.1.9.9.82.3.1.4
This group must be implemented by the entities that support 32 bits spannning tree path cost value.
MODULE-COMPLIANCE    

stpxMIBCompliance5 1.3.6.1.4.1.9.9.82.3.1.5
This stpxFastStartGroup is an optional group containing objects providing information about Spanning Tree Port Fast Start feature.
MODULE-COMPLIANCE    

stpxMIBCompliance6 1.3.6.1.4.1.9.9.82.3.1.6
This group is optional for implementations of Preferred MST Instance Map feature.
MODULE-COMPLIANCE    

stpxMIBCompliance7 1.3.6.1.4.1.9.9.82.3.1.7
This group is optional for implementation of Rapid PVST+ feature.
MODULE-COMPLIANCE    

stpxMIBCompliance8 1.3.6.1.4.1.9.9.82.3.1.8
This group is mandatory for implementation of Spanning Tree Port Fast Start Oper Mode feature.
MODULE-COMPLIANCE    

stpxMIBCompliance9 1.3.6.1.4.1.9.9.82.3.1.9
This group is mandatory for implementation of port hello time information for IEEE MST on the device.
MODULE-COMPLIANCE    

stpxMIBCompliance10 1.3.6.1.4.1.9.9.82.3.1.10
This group is mandatory for implementation of supporting Common and Internal Spanning Tree (CIST) information for IEEE MST on the device.
MODULE-COMPLIANCE    

stpxMIBCompliance11 1.3.6.1.4.1.9.9.82.3.1.11
This group is mandatory for implementation of supporting operational spanning tree path cost mode.
MODULE-COMPLIANCE    

stpxMIBCompliance12 1.3.6.1.4.1.9.9.82.3.1.12
This group is optional for implementation of supporting IEEE MST on the device.
MODULE-COMPLIANCE    

stpxUplinkGroup 1.3.6.1.4.1.9.9.82.3.2.1
A collection of objects for managing the UplinkFast capability.
OBJECT-GROUP    

stpxPreferredVlansGroup 1.3.6.1.4.1.9.9.82.3.2.2
A collection of objects for indicating preferred VLANs.
OBJECT-GROUP    

stpxSstpGroup 1.3.6.1.4.1.9.9.82.3.2.3
A collection of objects to support Cisco's Shared Spanning Tree Protocol (SSTP).
OBJECT-GROUP    

stpxNotificationsGroup 1.3.6.1.4.1.9.9.82.3.2.4
The notifications which a STP extension implementation is required to implement.
NOTIFICATION-GROUP    

stpxBackboneGroup 1.3.6.1.4.1.9.9.82.3.2.5
A collection of objects for managing the BackboneFast capability.
OBJECT-GROUP    

stpxRootGuardGroup 1.3.6.1.4.1.9.9.82.3.2.6
A collection of objects to support root guard capabilities.
OBJECT-GROUP    

stpxRootInconsistencyNotificationsGroup 1.3.6.1.4.1.9.9.82.3.2.7
The notifications which a STP root guard implementation is required to implement.
NOTIFICATION-GROUP    

stpx4kVlanGroup 1.3.6.1.4.1.9.9.82.3.2.8
A collection of objects providing information for VLANS with VlanIndex from 1024 to 4095.
OBJECT-GROUP    

stpxSpanningTreeGroup 1.3.6.1.4.1.9.9.82.3.2.9
An object selecting what kind of spanning tree protocol.
OBJECT-GROUP    

stpxMISTPGroup 1.3.6.1.4.1.9.9.82.3.2.10
A collection objects managing the information of MISTP feature.
OBJECT-GROUP    

stpxLongPathCostModeGroup 1.3.6.1.4.1.9.9.82.3.2.11
A collection objects managing the information of spanning tree path cost in 32 bits value.
OBJECT-GROUP    

stpxPVSTVlanGroup 1.3.6.1.4.1.9.9.82.3.2.12
A collection of objects managing the information of Spanning Tree PVST+ protocol VLAN configuration.
OBJECT-GROUP    

stpxMISTPGroup2 1.3.6.1.4.1.9.9.82.3.2.13
A collection objects managing the information of MISTP instances to VLAN mapping with the range of VlanIndex up to 4095.
OBJECT-GROUP    

stpxLoopGuardGroup 1.3.6.1.4.1.9.9.82.3.2.14
A collection of objects to support LoopGuard capabilities.
OBJECT-GROUP    

stpxLoopInconsistencyNotificationsGroup 1.3.6.1.4.1.9.9.82.3.2.15
The notifications which a STP LoopGuard implementation is required to implement.
NOTIFICATION-GROUP    

stpxFastStartGroup 1.3.6.1.4.1.9.9.82.3.2.16
A collection of objects to support Spanning Tree Port Fast Start feature.
OBJECT-GROUP    

stpxBpduSkewingGroup 1.3.6.1.4.1.9.9.82.3.2.17
This is an optional group with a collection of objects to support Spanning Tree BPDU Skewing feature.
OBJECT-GROUP    

stpxFastStartGroup2 1.3.6.1.4.1.9.9.82.3.2.18
An optional group with a collection of objects to support Fast Start global default mode on the device.
OBJECT-GROUP    

stpxLoopGuardGroup2 1.3.6.1.4.1.9.9.82.3.2.19
An optional group with a collection of objects to support Loop Guard global default mode on the device.
OBJECT-GROUP    

stpxMSTGroup 1.3.6.1.4.1.9.9.82.3.2.20
An optional group with a collection of objects to support Multiple Spanning Tree Protocol on the device.
OBJECT-GROUP    

stpxPreferredMSTInstancesGroup 1.3.6.1.4.1.9.9.82.3.2.21
An optional group with a collection of objects to support Preferred MST Instance Map feature for Multiple Spanning Tree Protocol on the device.
OBJECT-GROUP    

stpxFastStartGroup3 1.3.6.1.4.1.9.9.82.3.2.22
An optional group with a collection of objects to support per port Bpdu Guard and Bpdu Filter mode configuration on the device.
OBJECT-GROUP    

stpxUplinkGroup2 1.3.6.1.4.1.9.9.82.3.2.23
An optional group with a collection of objects to manage the UplinkFast capability.
OBJECT-GROUP    

stpxBackboneGroup2 1.3.6.1.4.1.9.9.82.3.2.24
An optional group with a collection of objects to manage the BackboneFast capability.
OBJECT-GROUP    

stpxMSTGroup2 1.3.6.1.4.1.9.9.82.3.2.25
An optional group with a collection of objects to support Multiple Spanning Tree Protocol on the device.
OBJECT-GROUP    

stpxRSTPGroup 1.3.6.1.4.1.9.9.82.3.2.26
An optional group with a collection of objects to support Rapid Spanning Tree Protocol on the device.
OBJECT-GROUP    

stpxRPVSTGroup 1.3.6.1.4.1.9.9.82.3.2.27
An optional group with a collection of objects to support Rapid PVST+ on the device.
OBJECT-GROUP    

stpxExtendedSysIDGroup 1.3.6.1.4.1.9.9.82.3.2.28
A collection of objects to manage the Extended System ID capability.
OBJECT-GROUP    

stpxNotificationEnableGroup 1.3.6.1.4.1.9.9.82.3.2.29
A collection of objects providing control on the generation of Spanning Tree notifications.
OBJECT-GROUP    

stpxFastStartOperModeGroup 1.3.6.1.4.1.9.9.82.3.2.30
A collection of objects providing Spanning Tree Port Fast Start Operatioanl information on a port.
OBJECT-GROUP    

stpxMSTGroup3 1.3.6.1.4.1.9.9.82.3.2.31
A collection of objects providing support for Multiple Spanning Tree Protocol on the device.
OBJECT-GROUP    

stpxSMSTGroup 1.3.6.1.4.1.9.9.82.3.2.32
A collection of objects providing support for IEEE MST on the device.
OBJECT-GROUP    

stpxSMSTInstanceGroup 1.3.6.1.4.1.9.9.82.3.2.33
A collection of objects providing support for MST instance information for IEEE MST on the device.
OBJECT-GROUP    

stpxSMSTInstanceEditGroup 1.3.6.1.4.1.9.9.82.3.2.34
A collection of objects providing support for MST instance edit information for IEEE MST on the device.
OBJECT-GROUP    

stpxSMSTPortStatusGroup 1.3.6.1.4.1.9.9.82.3.2.35
A collection of objects providing support for port status information for MST Protocol on the device.
OBJECT-GROUP    

stpxSMSTPortHelloTimeGroup 1.3.6.1.4.1.9.9.82.3.2.36
A collection of objects providing support for per port hello time information for IEEE MST on the device.
OBJECT-GROUP    

stpxSMSTInstanceCISTGroup 1.3.6.1.4.1.9.9.82.3.2.37
A collection of objects providing information about Common and Internal Spanning Tree (CIST) for IEEE MST on the device.
OBJECT-GROUP    

stpxPathCostOperModeGroup 1.3.6.1.4.1.9.9.82.3.2.38
A collection of objects providing information about operational spanning tree path cost mode.
OBJECT-GROUP    

stpxRSTPTransmitHoldCountGroup 1.3.6.1.4.1.9.9.82.3.2.39
A collection of objects providing information for configuration of transmit hold count for Rapid Spanning Tree Protocol.
OBJECT-GROUP    

stpxSMSTPortMSTModeGroup 1.3.6.1.4.1.9.9.82.3.2.40
A collection of objects providing information for port MST mode configuration on the device.
OBJECT-GROUP    

stpxSMSTMaxHopCountGroup 1.3.6.1.4.1.9.9.82.3.2.41
A collection of objects providing information for configuration of IEEE MST maximum hop count.
OBJECT-GROUP    

stpxSMSTConfigDigestGroup 1.3.6.1.4.1.9.9.82.3.2.42
A collection of objects providing information for MST configuration digests on the device.
OBJECT-GROUP    

stpxMSTGroup4 1.3.6.1.4.1.9.9.82.3.2.43
A collection of objects providing support for Multiple Spanning Tree Protocol on the device.
OBJECT-GROUP