CISCO-LWAPP-TAGS-MIB

File: CISCO-LWAPP-TAGS-MIB.mib (35000 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
SNMP-FRAMEWORK-MIB CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE MODULE-COMPLIANCE
OBJECT-GROUP Integer32 TruthValue
RowStatus SnmpAdminString MacAddress
ciscoMgmt

Defined Types

CLPolicyTagConfigEntry  
SEQUENCE    
  cLPolicyTagName SnmpAdminString
  cLPolicyTagDescription SnmpAdminString
  cLPolicyTagRowStatus RowStatus

CLPolicyProfileConfigEntry  
SEQUENCE    
  cLProfileName SnmpAdminString
  cLPolicyProfileName SnmpAdminString
  cLPolicyProfileRowStatus RowStatus

CLRlanPolicyProfileConfigEntry  
SEQUENCE    
  cLRlanPortID Integer32
  cLRlanProfile SnmpAdminString
  cLRlanPolicyProfile SnmpAdminString
  cLRlanPolicyProfileRowStatus RowStatus

CLRfTagConfigEntry  
SEQUENCE    
  cLRfTagName SnmpAdminString
  cLRfTagRowStatus RowStatus
  cL11aRfProfName SnmpAdminString
  cL11bRfProfName SnmpAdminString
  cLRfTagDescription SnmpAdminString

CLSiteTagConfigEntry  
SEQUENCE    
  cLSiteTagName SnmpAdminString
  cLSiteTagRowStatus RowStatus
  cLApJoinProfName SnmpAdminString
  cLFlexProfName SnmpAdminString
  cLSiteTagDescription SnmpAdminString
  cLReapSiteUpgradeStart INTEGER
  cLReapSiteTagStartCertificateDownload TruthValue
  cLIsLocalSite TruthValue

CLApConfigTagEntry  
SEQUENCE    
  cLApConfigTagSysMacAddress MacAddress
  cLApConfigPolicyTagName SnmpAdminString
  cLApConfigRfTagName SnmpAdminString
  cLApConfigSiteTagName SnmpAdminString
  cLApConfigTagRowStatus RowStatus

CLApFilterEntry  
SEQUENCE    
  cLApFilterName SnmpAdminString
  cLApFilterRowStatus RowStatus
  cLApFilterNameApNameRule SnmpAdminString
  cLApFilterPolicyTag SnmpAdminString
  cLApFilterSiteTag SnmpAdminString
  cLApFilterRfTag SnmpAdminString

CLApFilterPriorityEntry  
SEQUENCE    
  cLApFilterPriority Integer32
  cLApFilterPriorityRowStatus RowStatus
  cLApFilterPriorityFilterName SnmpAdminString

CLApTagSrcEntry  
SEQUENCE    
  cLApTagSrcPriority Integer32
  cLApTagSrcRowStatus RowStatus
  cLApTagSrcList INTEGER

Defined Values

ciscoLwappTagsMIB 1.3.6.1.4.1.9.9.858
This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. Information represented by this MIB is passed by the controller to those Cisco LWAPP APs, that can operate in stand-alone mode. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity is also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Native VLAN ID A switch port and/or AP can be configured with a 'native VLAN ID'. Untagged or priority-tagged frames are implicitly associated with the native VLAN ID. The default native VLAN ID is '1' if VLAN tagging is enabled. The native VLAN ID is '0' or 'no VLAN ID' if VLAN tagging is not enabled. Remote Edge Access Point ( REAP ) The LWAPP AP that can also act as a stand-alone AP when it loses communication with the controller it was associated with. When REAP can reach the controller (connected state), it gets help from controller to complete client authentication. When a controller is not reachable by REAP, it goes into standalone state and does client authentication by itself. All data packets from clients are either bridged locally (local-switch) or forwarded to the controller (central-switch) depending on the WLAN configuration. Virtual LAN VLAN defined in the IEEE 802.1Q VLAN standard supports logically segmenting of LAN infrastructure into different subnets or workgroups so that packets are switched only between ports within the same VLAN. VLAN ID Each VLAN is identified by a 12-bit 'VLAN ID'. A VLAN ID of '0' is used to indicate 'no VLAN ID'. Valid VLAN IDs range from '1' to '4095'. Home AP A REAP AP can be installed at end-user home. Home AP ethernet port will be connected to DSL or cable modem at home. Home AP will be primed with Controller IP Address so that it will join with controller. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications
MODULE-IDENTITY    

ciscoLwappTagsMIBNotifs 1.3.6.1.4.1.9.9.858.0
OBJECT IDENTIFIER    

ciscoLwappTagsMIBObjects 1.3.6.1.4.1.9.9.858.1
OBJECT IDENTIFIER    

ciscoLwappTagsMIBConform 1.3.6.1.4.1.9.9.858.2
OBJECT IDENTIFIER    

ciscoLwappPolicyTagConfig 1.3.6.1.4.1.9.9.858.1.1
OBJECT IDENTIFIER    

ciscoLwappSiteTagConfig 1.3.6.1.4.1.9.9.858.1.2
OBJECT IDENTIFIER    

ciscoLwappRfTagConfig 1.3.6.1.4.1.9.9.858.1.3
OBJECT IDENTIFIER    

ciscoLwappApTag 1.3.6.1.4.1.9.9.858.1.4
OBJECT IDENTIFIER    

ciscoLwappApFilter 1.3.6.1.4.1.9.9.858.1.5
OBJECT IDENTIFIER    

cLPolicyTagConfigTable 1.3.6.1.4.1.9.9.858.1.1.1
This table represents the policy tag configuration of controller. Policy tag is defined as a tag which has a set of WLAN profile names to policy profile names. Policy tag applied to an AP decides the list of SSID gets broadcasted. The SSID properties are defined by both WLAN profile and Policy profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CLPolicyTagConfigEntry

cLPolicyTagConfigEntry 1.3.6.1.4.1.9.9.858.1.1.1.1
Each entry represents a conceptual row in cLPolicyTagConfigTable and corresponds to a policy tag in a controller.
Status: current Access: not-accessible
OBJECT-TYPE    
  CLPolicyTagConfigEntry  

cLPolicyTagName 1.3.6.1.4.1.9.9.858.1.1.1.1.1
This object uniquely identifies an entry in cLPolicyTagConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

cLPolicyTagDescription 1.3.6.1.4.1.9.9.858.1.1.1.1.2
This object is used to specify the description of the policy tag.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..64)  

cLPolicyTagRowStatus 1.3.6.1.4.1.9.9.858.1.1.1.1.3
This object specifies the row status of the policy tag table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cLPolicyProfileConfigTable 1.3.6.1.4.1.9.9.858.1.1.2
This table represents the policy profile configuration of controller.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CLPolicyProfileConfigEntry

cLPolicyProfileConfigEntry 1.3.6.1.4.1.9.9.858.1.1.2.1
Each entry represents a conceptual row in CLPolicyProfileConfigEntryTable and corresponds to a policy tag in controller.
Status: current Access: not-accessible
OBJECT-TYPE    
  CLPolicyProfileConfigEntry  

cLProfileName 1.3.6.1.4.1.9.9.858.1.1.2.1.1
This object uniquely identifies the wlan profile configured to a given policy tag
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

cLPolicyProfileName 1.3.6.1.4.1.9.9.858.1.1.2.1.2
This object uniquely identifies the policy profile name that is mapped to the wlan profile part of this policy tag.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

cLPolicyProfileRowStatus 1.3.6.1.4.1.9.9.858.1.1.2.1.3
This object specifies the row status of the policy tag table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cLRlanPolicyProfileConfigTable 1.3.6.1.4.1.9.9.858.1.1.3
This table represents the mapping of the RLAN-policy to the policy tag configuration of controller. Policy tag is defined as a tag which has a set of WLAN and RLAN profile names attached to policy profile names. Policy tag, when used/attached to an AP defines the policy names for RLAN profiles which should be used by the clients associated to the corresponding RLANs.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CLRlanPolicyProfileConfigEntry

cLRlanPolicyProfileConfigEntry 1.3.6.1.4.1.9.9.858.1.1.3.1
Each entry represents a conceptual row in cLRlanPolicyProfileConfigTable and corresponds to a RLAN policy associated with the given policy tag
Status: current Access: not-accessible
OBJECT-TYPE    
  CLRlanPolicyProfileConfigEntry  

cLRlanPortID 1.3.6.1.4.1.9.9.858.1.1.3.1.1
This object uniquely identifies an entry in cLRlanPolicyProfileConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..4  

cLRlanProfile 1.3.6.1.4.1.9.9.858.1.1.3.1.2
This object identifies the RLAN profile associated with the given cLRlanPortID.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

cLRlanPolicyProfile 1.3.6.1.4.1.9.9.858.1.1.3.1.3
This object uniquely identifies the RLAN policy profile name that is mapped to the RLAN profile part of this policy tag.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

cLRlanPolicyProfileRowStatus 1.3.6.1.4.1.9.9.858.1.1.3.1.4
This object specifies the row status of the cLRlanPolicyProfileConfigTable table.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

cLRfTagConfigTable 1.3.6.1.4.1.9.9.858.1.3.1
This table represents the RF tag configuration of controller. RF tag is defined as a tag which has a couple of RF profiles attached to it corresponding to 11z and 11b/g radios.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CLRfTagConfigEntry

cLRfTagConfigEntry 1.3.6.1.4.1.9.9.858.1.3.1.1
Each entry represents a conceptual row in cLRFTagConfigTable and corresponds to an RF tag in a Controller.
Status: current Access: not-accessible
OBJECT-TYPE    
  CLRfTagConfigEntry  

cLRfTagName 1.3.6.1.4.1.9.9.858.1.3.1.1.1
This object uniquely identifies an RF tag entry in cLRFTagConfigTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

cLRfTagRowStatus 1.3.6.1.4.1.9.9.858.1.3.1.1.2
This object specifies the row status of the RF tag table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cL11aRfProfName 1.3.6.1.4.1.9.9.858.1.3.1.1.3
This object identifies the 802.11a RF profile configured under RF tag.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

cL11bRfProfName 1.3.6.1.4.1.9.9.858.1.3.1.1.4
This object specifies the 802.11b RF profile configured under RF tag.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

cLRfTagDescription 1.3.6.1.4.1.9.9.858.1.3.1.1.5
This object specifies the description of the RF tag.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..64)  

cLSiteTagConfigTable 1.3.6.1.4.1.9.9.858.1.2.1
This table represents the site tag configuration of controller. Site tag is defined as a tag which has the AP join profile and the flex profile within it.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CLSiteTagConfigEntry

cLSiteTagConfigEntry 1.3.6.1.4.1.9.9.858.1.2.1.1
Each entry represents a conceptual row in cLSiteTagConfigTable and corresponds to an site tag in a controller.
Status: current Access: not-accessible
OBJECT-TYPE    
  CLSiteTagConfigEntry  

cLSiteTagName 1.3.6.1.4.1.9.9.858.1.2.1.1.1
This object uniquely represent the site tag name.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

cLSiteTagRowStatus 1.3.6.1.4.1.9.9.858.1.2.1.1.2
This object specifies the row status of the site tag table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cLApJoinProfName 1.3.6.1.4.1.9.9.858.1.2.1.1.3
This object specifies the AP join profile name which is part of the site tag.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

cLFlexProfName 1.3.6.1.4.1.9.9.858.1.2.1.1.4
This object specifies the flex profile name which is part of the site tag.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

cLSiteTagDescription 1.3.6.1.4.1.9.9.858.1.2.1.1.5
This object specifies the description of the site tag.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(0..64)  

cLReapSiteUpgradeStart 1.3.6.1.4.1.9.9.858.1.2.1.1.6
This object specifies the efficient AP image upgrade for the heap group. initiatePrimary - Efficient AP image upgrade for heap group is done with primary initiateBackup - Efficient AP image upgrade for heap group is done with backup abort - Efficient AP image upgrade for heap group is aborted.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER initiatePrimary(1), initiateBackup(2), abort(3)  

cLReapSiteTagStartCertificateDownload 1.3.6.1.4.1.9.9.858.1.2.1.1.7
This object specifies whether certificate for EAP-TLS is enabled. A value of 'true' indicates that EAP-TLS is enabled. A value of 'false' indicates that EAP-TLS is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cLIsLocalSite 1.3.6.1.4.1.9.9.858.1.2.1.1.8
This object specifies whether local site is enabled or not. A value of 'true' indicates that local site is enabled. A value of 'false' indicates that local site is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cLApConfigTagTable 1.3.6.1.4.1.9.9.858.1.4.1
This table provides the mapping of AP to the various tags.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CLApConfigTagEntry

cLApConfigTagEntry 1.3.6.1.4.1.9.9.858.1.4.1.1
Each entry in this table provides information about the tags that the AP is mapped to.
Status: current Access: not-accessible
OBJECT-TYPE    
  CLApConfigTagEntry  

cLApConfigTagSysMacAddress 1.3.6.1.4.1.9.9.858.1.4.1.1.1
This object specifies the ethernet MAC of the AP and uniquely identifies an entry in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

cLApConfigPolicyTagName 1.3.6.1.4.1.9.9.858.1.4.1.1.2
This object specifies the policy tag that is configured for a particular AP with cLApTagSysMacAddress as its ethernet mac.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

cLApConfigRfTagName 1.3.6.1.4.1.9.9.858.1.4.1.1.3
This object specifies the RF tag that is configured for a particular AP with cLApTagSysMacAddress as its ethernet mac.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

cLApConfigSiteTagName 1.3.6.1.4.1.9.9.858.1.4.1.1.4
This object specifies the site tag that is configured a particular AP with cLApTagSysMacAddress as its ethernet mac.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

cLApConfigTagRowStatus 1.3.6.1.4.1.9.9.858.1.4.1.1.5
This object specifies the row status of the site tag table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cLApFilterTable 1.3.6.1.4.1.9.9.858.1.5.1
This table provides the various AP filter config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CLApFilterEntry

cLApFilterEntry 1.3.6.1.4.1.9.9.858.1.5.1.1
Each entry in this table provides information about the AP filter config.
Status: current Access: not-accessible
OBJECT-TYPE    
  CLApFilterEntry  

cLApFilterName 1.3.6.1.4.1.9.9.858.1.5.1.1.1
This object specifies the name given to the AP filter configured to uniquely identify the filter.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

cLApFilterRowStatus 1.3.6.1.4.1.9.9.858.1.5.1.1.2
This object specifies the row status of the AP filter table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cLApFilterNameApNameRule 1.3.6.1.4.1.9.9.858.1.5.1.1.3
This object specifies AP name string based on which AP filter is configured.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString  

cLApFilterPolicyTag 1.3.6.1.4.1.9.9.858.1.5.1.1.4
This object specifies policy tag details for AP filter configured.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString  

cLApFilterSiteTag 1.3.6.1.4.1.9.9.858.1.5.1.1.5
This object specifies site tag details for AP filter configured.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString  

cLApFilterRfTag 1.3.6.1.4.1.9.9.858.1.5.1.1.6
This object specifies RF tag details for AP filter configured.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString  

cLApFilterPriorityTable 1.3.6.1.4.1.9.9.858.1.5.2
This table provides the various AP filter config.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CLApFilterPriorityEntry

cLApFilterPriorityEntry 1.3.6.1.4.1.9.9.858.1.5.2.1
Each entry in this table provides information about the AP filter priority config.
Status: current Access: not-accessible
OBJECT-TYPE    
  CLApFilterPriorityEntry  

cLApFilterPriority 1.3.6.1.4.1.9.9.858.1.5.2.1.1
This object specifies the priority given to the AP filter that is configured uniquely.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..127  

cLApFilterPriorityRowStatus 1.3.6.1.4.1.9.9.858.1.5.2.1.2
This object specifies the row status of the AP filter priority table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cLApFilterPriorityFilterName 1.3.6.1.4.1.9.9.858.1.5.2.1.3
This object specifies AP name for which the priority is been set.
Status: current Access: read-write
OBJECT-TYPE    
  SnmpAdminString  

cLApTagSrcTable 1.3.6.1.4.1.9.9.858.1.4.2
This table provides the details on various AP filter source configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CLApTagSrcEntry

cLApTagSrcEntry 1.3.6.1.4.1.9.9.858.1.4.2.1
Each entry in this table provides information about the AP filter priority source config.
Status: current Access: not-accessible
OBJECT-TYPE    
  CLApTagSrcEntry  

cLApTagSrcPriority 1.3.6.1.4.1.9.9.858.1.4.2.1.1
This object specifies the priority given to the AP filter tag source.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..127  

cLApTagSrcRowStatus 1.3.6.1.4.1.9.9.858.1.4.2.1.2
This object specifies the row status of the AP filter tag source table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cLApTagSrcList 1.3.6.1.4.1.9.9.858.1.4.2.1.3
This object specifies the list sources for AP tags. none - Invalid static - per AP static configuration filter - The tag details for the AP is taken from the active filter. ap - tags received from AP during AP join. default - default tags. location - tags configured under user defined Location construct.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER none(1), static(2), filter(3), ap(4), default(5), location(6)  

ciscoLwappTagsMIBCompliances 1.3.6.1.4.1.9.9.858.2.1
OBJECT IDENTIFIER    

ciscoLwappTagsMIBGroups 1.3.6.1.4.1.9.9.858.2.2
OBJECT IDENTIFIER    

ciscoLwappTagsMIBCompliance 1.3.6.1.4.1.9.9.858.2.1.1
The compliance statement for the SNMP entities that implement the ciscoLwappTagsMIB module.
Status: current Access: read-create
MODULE-COMPLIANCE    

ciscoLwappTagsConfigGroup 1.3.6.1.4.1.9.9.858.2.2.1
This collection of objects represent the Policy tags configuration.
Status: current Access: read-create
OBJECT-GROUP    

ciscoLwappFilterConfigGroup 1.3.6.1.4.1.9.9.858.2.2.2
This collection of objects represent the AP filter configuration.
Status: current Access: read-create
OBJECT-GROUP    

ciscoLwappRlanConfigGroup 1.3.6.1.4.1.9.9.858.2.2.3
This collection of objects represent the Rlan policy configuration.
Status: current Access: read-create
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor