CISCO-LWAPP-RLAN-MIB
File:
CISCO-LWAPP-RLAN-MIB.mib (41663 bytes)
Imported modules
Imported symbols
Defined Types
| CLRlanEntry |
|
| SEQUENCE |
|
|
|
| |
cLRlanIndex |
Unsigned32 |
|
| |
cLRlanRowStatus |
RowStatus |
|
| |
cLRlanProfileName |
SnmpAdminString |
|
| |
cLRlanMacFiltering |
SnmpAdminString |
|
| |
cLRlanAuthList |
SnmpAdminString |
|
| |
cLRlanSecurity8021X |
TruthValue |
|
| |
cLRlanSecurityWebAuth |
TruthValue |
|
| |
cLRlanEapAuthProfileName |
SnmpAdminString |
|
| |
cLRlanEapAuthStatus |
TruthValue |
|
| |
cLRlanWebAuthParameter |
SnmpAdminString |
|
| |
cLRlanClientLimit |
Unsigned32 |
|
| |
cLRlanStatus |
TruthValue |
|
| |
cLRlanWebAuthIpv4Acl |
SnmpAdminString |
|
| |
cLRlanWebAuthIpv6Acl |
SnmpAdminString |
|
| |
cLRlanSecurity8021XAuthList |
SnmpAdminString |
|
| CLRlanPolicyEntry |
|
| SEQUENCE |
|
|
|
| |
cLRlanPolicyProfileName |
SnmpAdminString |
|
| |
cLRlanPolicyRowStatus |
RowStatus |
|
| |
cLRlanPolicyStatus |
TruthValue |
|
| |
cLRlanPolicyDesc |
SnmpAdminString |
|
| |
cLRlanPolicyIpv4Acl |
SnmpAdminString |
|
| |
cLRlanPolicyIpv6Acl |
SnmpAdminString |
|
| |
cLRlanAAAOverride |
TruthValue |
|
| |
cLRlanCentralSwitching |
TruthValue |
|
| |
cLRlanInterface |
SnmpAdminString |
|
| |
cLRlanPoeEnabled |
TruthValue |
|
| |
cLRlanHostMode |
Integer32 |
|
| |
cLRlanViolationMode |
Integer32 |
|
| |
cLRlanVoiceVlanId |
Unsigned32 |
|
| |
cLRlanDataVlanId |
Unsigned32 |
|
| |
cLRlanBlacklistEnabled |
TruthValue |
|
| |
cLRlanBlacklistTimeout |
Unsigned32 |
|
| |
cLRlanAAAPolicyName |
SnmpAdminString |
|
| |
cLRlanSessionTimeout |
Unsigned32 |
|
| |
cLRlanPreAuthEnabled |
TruthValue |
|
| |
cLRlanDhcpServerType |
InetAddressType |
|
| |
cLRlanDhcpServer |
InetAddress |
|
| |
cLRlanRadiusHttpProfiling |
TruthValue |
|
| |
cLRlanRadiusDhcpProfiling |
TruthValue |
|
| |
cLRlanLocalHttpProfiling |
TruthValue |
|
| |
cLRlanLocalDhcpProfiling |
TruthValue |
|
| |
cLRlanIpv6IngressStatus |
TruthValue |
|
| |
cLRlanIpv6EgressStatus |
TruthValue |
|
| |
cLRlanIpv4IngressStatus |
TruthValue |
|
| |
cLRlanIpv4EgressStatus |
TruthValue |
|
| |
cLRlanIpv6IngressName |
SnmpAdminString |
|
| |
cLRlanIpv6EgressName |
SnmpAdminString |
|
| |
cLRlanIpv4IngressName |
SnmpAdminString |
|
| |
cLRlanIpv4EgressName |
SnmpAdminString |
|
| |
cLRlanSplitTunnelGatewayType |
InetAddressType |
|
| |
cLRlanSplitTunnelGateway |
InetAddress |
|
| |
cLRlanSplitTunnelNetmaskType |
InetAddressType |
|
| |
cLRlanSplitTunnelNetmask |
InetAddress |
|
| |
cLRlanSplitTunnel |
TruthValue |
|
| |
cLRlanAclName |
SnmpAdminString |
|
| |
cLRlanSplitTunnelOverride |
TruthValue |
|
| |
cLRlanAccountingList |
SnmpAdminString |
|
| |
cLRlanDhcpEnabled |
TruthValue |
|
| |
cLRlanCentralDhcp |
TruthValue |
|
Defined Values
| ciscoLwappRlanMIB |
1.3.6.1.4.1.9.9.856 |
| This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Cisco Light-weight LWAPP Access Points.
This MIB helps to manage the RLANs on the controller.
The relationship between CC and the LWAPP APs
can be depicted as follows:
+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the RLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends it to the controller to which
it is logically connected to.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity also referred to as 'controller'.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
controllers.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point.
Access Control List ( ACL )
A list of rules used to restrict the traffic reaching
an interface or the CPU or RLAN. Each ACL is an ordered
set of rules and actions. If a rule matches then the
action for that rule is applied to the packet.
802.1x
The IEEE ratified standard for enforcing port based
access control. This was originally intended for
use on wired LANs and later extended for use in
802.11 RLAN environments. This defines an
architecture with three main parts - a supplicant
(Ex. an 802.11 wireless client), an authenticator
(the AP) and an authentication server(a Radius
server). The authenticator passes messages back
and forth between the supplicant and the
authentication server to enable the supplicant
get authenticated to the network.
Temporal Key Integrity Protocol ( TKIP )
A security protocol defined to enhance the limitations
of WEP. Message Integrity Check and per-packet keying
on all WEP-encrypted frames are two significant
enhancements provided by TKIP to WEP.
Cisco Key Integrity Protocol ( CKIP )
A proprietary implementation similar to TKIP. CKIP
implements key permutation for protecting the CKIP
key against attacks. Other features of CKIP include
expansion of encryption key to 16 bytes of length for
key protection and MIC to ensure data integrity.
Wired Equivalent Privacy ( WEP )
A security method defined by 802.11. WEP uses a
symmetric key stream cipher called RC4 to encrypt the
data packets.
Wi-Fi Protected Access ( WPA )
Wi-Fi Protected Access (WPA and WPA2) are security
systems created in response to several serious
weaknesses found in Wired Equivalent Privacy (WEP).
WPA implements the majority of the IEEE 802.11i
standard, and was intended as an intermediate
measure to take the place of WEP while 802.11i was
prepared. WPA is designed to work with all wireless
network interface cards, but not necessarily with
first generation wireless access points.
RLAN Layer 2 Security
RLAN layer 2 (MAC) security defines the encryption and
authentication approaches such as 802.1x, WPA,
WPA2, CKIP and WEP.
POE (Power Over Ethernet)
Power over Ethernet or PoE describes any of
several standardized or ad-hoc systems which
pass electrical power along with data on
Ethernet cabling. This allows a single cable
to provide both data connection and electrical
power to devices such as wireless
access points or IP cameras.
REFERENCE
[1] Wireless LAN Medium Access Control ( MAC ) and
Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol
[3] IEEE 802.11 - The original 1 Mbit/s and 2 Mbit/s,
2.4 GHz RF and IR standard. |
| MODULE-IDENTITY |
|
|
|
| cLRlanTable |
1.3.6.1.4.1.9.9.856.1.1.1 |
| This table represents the RLAN configuration sent by
the controller to the APs for their operation.
LWAPP APs exchange configuration messages with the
controller and get the required configuration for
their 802.11 related operations. As part of these
messages, the RLAN configuration is pushed by the
controller to the LWAPP APs.
This table doesn't have any dependencies on other
existing tables. By defining cLRlanIndex, the
unique identifier for a RLAN, this table provides
a common index structure for use in several other
new tables that populate information on security
related attributes like authentication, encryption,
802.11 parameters, Quality-of-Service attributes
etc., that would relate to a particular RLAN.
Rows are added or deleted by explicit
management actions initiated by the user from a
network management station through the
cLRlanRowStatus object. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
CLRlanEntry |
|
| cLRlanEntry |
1.3.6.1.4.1.9.9.856.1.1.1.1 |
| Each entry in this table represents the RLAN
configuration sent by the controller to APs
for use during their operations. entries can be
added/deleted by explicit management actions by Prime
or by user console. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
CLRlanEntry |
|
|
| cLRlanIndex |
1.3.6.1.4.1.9.9.856.1.1.1.1.1 |
| This object uniquely identifies one instance of
a RLAN on the controller. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..128 |
|
| cLRlanRowStatus |
1.3.6.1.4.1.9.9.856.1.1.1.1.2 |
| This is the status column for this row and used
to create, modify and delete specific instances of rows
in this table.
This table supports modification of writable objects when the
RowStatus is 'active'.
The following objects are mandatory for successful
creation of an entry:
cLRlanIndex
cLRlanProfileName. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| cLRlanProfileName |
1.3.6.1.4.1.9.9.856.1.1.1.1.3 |
| This object represents the profile name assigned
to this RLAN. The name assigned to a RLAN has to be
unique across all the RLANs on the controller.
An administrator can assign a meaningful
name that could later be used to refer a particular
RLAN on the controller. This object cannot be
modified when cLRlanRowStatus is 'active'. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| cLRlanMacFiltering |
1.3.6.1.4.1.9.9.856.1.1.1.1.4 |
| A type of security policy for Mobile Stations
(Clients). This enables filtering of clients by MAC address. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| cLRlanAuthList |
1.3.6.1.4.1.9.9.856.1.1.1.1.5 |
| This object is used to configure AAA
Authentication list for RLAN |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| cLRlanSecurity8021X |
1.3.6.1.4.1.9.9.856.1.1.1.1.6 |
| This object specifies if the dot1x authentication
is enabled or not for the RLAN.
A value of 'true' indicates that
dot1x security is enabled.
A value of 'false' indicates that
dot1x security is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanSecurityWebAuth |
1.3.6.1.4.1.9.9.856.1.1.1.1.7 |
| This object specifies if the web authentication
is enabled or not for the RLAN.
A value of 'true' indicates that
web authentication is enabled.
A value of 'false' indicates that
web authentication is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanEapAuthProfileName |
1.3.6.1.4.1.9.9.856.1.1.1.1.8 |
| This object uniquely identifies the profile name
using which EAP authentication is done for this RLAN |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| cLRlanEapAuthStatus |
1.3.6.1.4.1.9.9.856.1.1.1.1.9 |
| This object specifies if the EAP authentication
is enabled or not for the RLAN.
A value of 'true' indicates that
EAP authentication is enabled.
A value of 'false' indicates that
EAP authentication is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanWebAuthParameter |
1.3.6.1.4.1.9.9.856.1.1.1.1.10 |
| This object specifies the Parameter for
web authentication for the given RLAN |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| cLRlanClientLimit |
1.3.6.1.4.1.9.9.856.1.1.1.1.11 |
| This object indicates the maximum number of
allowed clients for the given RLAN. Default value
0 indicates no restriction on the client number. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..10000 |
|
| cLRlanStatus |
1.3.6.1.4.1.9.9.856.1.1.1.1.12 |
| This object represents the status of the RLAN.
A value of 'true' indicates that
RLAN profile is enabled.
A value of 'false' indicates that
RLAN profile is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanWebAuthIpv4Acl |
1.3.6.1.4.1.9.9.856.1.1.1.1.13 |
| This object represents the pre web Auth
IPv4 ACL for the given RLAN. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| cLRlanWebAuthIpv6Acl |
1.3.6.1.4.1.9.9.856.1.1.1.1.14 |
| This object represents the pre web Auth
IPv4 ACL for the given RLAN. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| cLRlanPolicyTable |
1.3.6.1.4.1.9.9.856.1.1.2 |
| This table holds the RLAN policies
configured on the controller.
Each entry is represented by the object
cLRlanPolicyEntry. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
CLRlanPolicyEntry |
|
| cLRlanPolicyEntry |
1.3.6.1.4.1.9.9.856.1.1.2.1 |
| Each entry in this table represents the RLAN policy
configuration sent by the controller to APs
for use during their operations. entries can be
added/deleted by explicit management actions by
NMS or by user console |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
CLRlanPolicyEntry |
|
|
| cLRlanPolicyProfileName |
1.3.6.1.4.1.9.9.856.1.1.2.1.1 |
| This object uniquely identifies one instance of
a RLAN policy on the controller. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| cLRlanPolicyRowStatus |
1.3.6.1.4.1.9.9.856.1.1.2.1.2 |
| This is the status column for this row and used
to create, modify and delete specific instances of rows
in this table.
This table supports modification of writable objects when the
RowStatus is 'active'.
The following objects are mandatory for successful
creation of an entry:
cLRlanPolicyProfileName. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| cLRlanPolicyStatus |
1.3.6.1.4.1.9.9.856.1.1.2.1.3 |
| This object specifies whether the RLAN policy
is enabled or not.
A value of 'true' indicates that
RLAN policy profile is enabled.
A value of 'false' indicates that
RLAN policy profile is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanPolicyDesc |
1.3.6.1.4.1.9.9.856.1.1.2.1.4 |
| This object describes the policy of RLAN. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| cLRlanPolicyIpv4Acl |
1.3.6.1.4.1.9.9.856.1.1.2.1.5 |
| This object uniquely identifies the
name of ipv4 ACL for given RLAN. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| cLRlanPolicyIpv6Acl |
1.3.6.1.4.1.9.9.856.1.1.2.1.6 |
| This object uniquely identifies the
name of ipv6 ACL for given RLAN. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| cLRlanAAAOverride |
1.3.6.1.4.1.9.9.856.1.1.2.1.7 |
| This object specifies if the AAA override for
global parameters is enabled or disabled.
A value of 'true' indicates that
AAA Override is enabled.
A value of 'false' indicates that
AAA Override is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanCentralSwitching |
1.3.6.1.4.1.9.9.856.1.1.2.1.8 |
| This object specifies if the central switching
for RLAN is enabled or disabled.
A value of 'true' indicates that
Central Switching is enabled.
A value of 'false' indicates that
Central Switching is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanInterface |
1.3.6.1.4.1.9.9.856.1.1.2.1.9 |
| This object uniquely identifies the
RLAN interface name. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| cLRlanPoeEnabled |
1.3.6.1.4.1.9.9.856.1.1.2.1.10 |
| This object uniquely identifies
RLAN Power Over Ethernet status.
A value of 'true' indicates
that RLAN POE is enabled.
A value of 'false' indicates
that RLAN POE is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanHostMode |
1.3.6.1.4.1.9.9.856.1.1.2.1.11 |
| This object configures the host mode
for the RLAN.
1 - SINGLE_HOST_MODE,
2 - MULTI_HOST_MODE,
3 - MULTI_DOMAIN_MODE. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
sinlgeHostMode(1), multiHostMode(2), multiDomainMode(3) |
|
| cLRlanViolationMode |
1.3.6.1.4.1.9.9.856.1.1.2.1.12 |
| This objecti configures the voilation
mode for the RLAN.
0 - REPLACE,
1 - SHUTDOWN,
2 - PROTECT |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
protect(0), replace(1), shutdown(2) |
|
| cLRlanVoiceVlanId |
1.3.6.1.4.1.9.9.856.1.1.2.1.13 |
| This object specifies VLAN ID for the voice
during the multi domain mode for RLAN on the controller.
The host mode (cLRlanHostMode) should be set to
multi-domain mode(value: 3). |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| cLRlanDataVlanId |
1.3.6.1.4.1.9.9.856.1.1.2.1.14 |
| This object specifies VLAN ID for the data
during the multi domain mode for RLAN on the controller.
The host mode (cLRlanHostMode) should be set to
multi-domain mode(value: 3). |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| cLRlanBlacklistEnabled |
1.3.6.1.4.1.9.9.856.1.1.2.1.15 |
| This object identifies is the blacklisting
is enabled or not for the given RLAN.
A value of 'true' indicates
that RLAN Blacklisting is enabled.
A value of 'false' indicates
that RLAN Blacklisting is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanBlacklistTimeout |
1.3.6.1.4.1.9.9.856.1.1.2.1.16 |
| This object identifies the timeout
duration in seconds for the blacklist in RLAN. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
0..2147483647 |
|
| cLRlanAAAPolicyName |
1.3.6.1.4.1.9.9.856.1.1.2.1.17 |
| This object identifies the AAA policy name
for the given RLAN. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| cLRlanSessionTimeout |
1.3.6.1.4.1.9.9.856.1.1.2.1.18 |
| This object identifies the session
timeout duration in seconds for RLAN. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
20..86400 |
|
| cLRlanPreAuthEnabled |
1.3.6.1.4.1.9.9.856.1.1.2.1.19 |
| This object specifies if the preAuth is
enabled or not for the RLAN on the controller.
A value of 'true' indicates that
RLAN Pre-Authentication is enabled.
A value of 'false' indicates that
RLAN Pre-Authentication is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanDhcpServerType |
1.3.6.1.4.1.9.9.856.1.1.2.1.20 |
| This object specifies the address type
DHCP parameters IP for Remote-LAN. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
InetAddressType |
|
|
| cLRlanDhcpServer |
1.3.6.1.4.1.9.9.856.1.1.2.1.21 |
| This object configures the
DHCP parameters for Remote-LAN |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
InetAddress |
|
|
| cLRlanRadiusHttpProfiling |
1.3.6.1.4.1.9.9.856.1.1.2.1.22 |
| This object uniquely identifies Client profiling
on RLAN in Radius mode based on HTTP attribute.
A value of 'true' indicates that
Radius HTTP profiling is enabled.
A value of 'false' indicates that
Radius HTTP profiling is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanRadiusDhcpProfiling |
1.3.6.1.4.1.9.9.856.1.1.2.1.23 |
| This object uniquely identifies Client profiling
on RLAN in Radius mode based on DHCP attribute.
A value of 'true' indicates that
Radius DHCP profiling is enabled.
A value of 'false' indicates that
Radius DHCP profiling is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanLocalHttpProfiling |
1.3.6.1.4.1.9.9.856.1.1.2.1.24 |
| This object uniquely identifies Client profiling
on RLAN in local mode based on HTTP attribute.
A value of 'true' indicates that
Local HTTP profiling is enabled.
A value of 'false' indicates that
Local HTTP profiling is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanLocalDhcpProfiling |
1.3.6.1.4.1.9.9.856.1.1.2.1.25 |
| This object uniquely identifies Client profiling
on RLAN in local mode based on DHCP attribute.
A value of 'true' indicates that
Local DHCP profiling is enabled.
A value of 'false' indicates that
Local DHCP profiling is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanIpv6IngressStatus |
1.3.6.1.4.1.9.9.856.1.1.2.1.26 |
| This object specifies if the flow monitor
on ingress traffic, for IPv6, is enabled or disabled.
A value of 'true' indicates that
IPv6 Ingress traffic is enabled.
A value of 'false' indicates that
IPv6 Ingress traffic is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanIpv6EgressStatus |
1.3.6.1.4.1.9.9.856.1.1.2.1.27 |
| This object specifies if the flow monitor
on egress traffic, for IPv6, is enabled or disabled.
A value of 'true' indicates that
IPv6 Engress traffic is enabled.
A value of 'false' indicates that
IPv6 Engress traffic is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanIpv4IngressStatus |
1.3.6.1.4.1.9.9.856.1.1.2.1.28 |
| This object specifies if the flow monitor
on ingress traffic, for IPv4, is enabled or disabled.
A value of 'true' indicates that
IPv4 Ingress traffic is enabled.
A value of 'false' indicates that
IPv4 Ingress traffic is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanIpv4EgressStatus |
1.3.6.1.4.1.9.9.856.1.1.2.1.29 |
| This object specifies if the flow monitor
on egress traffic, for IPv4, is enabled or disabled.
A value of 'true' indicates that
IPv4 Engress traffic is enabled.
A value of 'false' indicates that
IPv4 Engress traffic is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanIpv6IngressName |
1.3.6.1.4.1.9.9.856.1.1.2.1.30 |
| This object specifies the Qos profile name for
flow monitor on ingress traffic, for IPv6. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| cLRlanIpv6EgressName |
1.3.6.1.4.1.9.9.856.1.1.2.1.31 |
| This object specifies the Qos profile name for
flow monitor on egress traffic, for IPv6. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| cLRlanIpv4IngressName |
1.3.6.1.4.1.9.9.856.1.1.2.1.32 |
| This object specifies the Qos profile name for
flow monitor on ingress traffic, for IPv4. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| cLRlanIpv4EgressName |
1.3.6.1.4.1.9.9.856.1.1.2.1.33 |
| This object specifies the Qos profile name for
flow monitor on egress traffic, for IPv4. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| cLRlanSplitTunnelGatewayType |
1.3.6.1.4.1.9.9.856.1.1.2.1.34 |
| This object identifies the IP address type
of gateway address for the split tunnel
trafficking of the data on RLAN. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
InetAddressType |
|
|
| cLRlanSplitTunnelGateway |
1.3.6.1.4.1.9.9.856.1.1.2.1.35 |
| This object identifies the gateway address
for the split tunnel trafficking of the data on RLAN. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
InetAddress |
|
|
| cLRlanSplitTunnelNetmask |
1.3.6.1.4.1.9.9.856.1.1.2.1.37 |
| This object identifies the netmask for the
split tunnel trafficking of the data on RLAN. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
InetAddress |
|
|
| cLRlanSplitTunnel |
1.3.6.1.4.1.9.9.856.1.1.2.1.38 |
| This object identifies whether the split tunnel
traffic movement of the data is enabled.
A value of 'true' indicates that
split tunnelling is enabled.
A value of 'false' indicates that
split tunnelling is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanAclName |
1.3.6.1.4.1.9.9.856.1.1.2.1.39 |
| This object identifies the ACL name
for the split tunnel data trafficking. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| cLRlanSplitTunnelOverride |
1.3.6.1.4.1.9.9.856.1.1.2.1.40 |
| This object identifies whether the split tunnel
traffic movement of the data is overriden.
A value of 'true' indicates that
split tunnel override is enabled.
A value of 'false' indicates that
split tunnel override is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanAccountingList |
1.3.6.1.4.1.9.9.856.1.1.2.1.41 |
| This object specifies the AAA Accounting list
associated to the given RLAN |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
SnmpAdminString |
Size(1..32) |
|
| cLRlanDhcpEnabled |
1.3.6.1.4.1.9.9.856.1.1.2.1.42 |
| This object specifies whether the DHCP is
required for the IPv4 of the given RLAN.
A value of 'true' indicates
that RLAN DHCP is enabled.
A value of 'false' indicates that
RLAN DHCP is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| cLRlanCentralDhcp |
1.3.6.1.4.1.9.9.856.1.1.2.1.43 |
| This object specifies if the central dhcp
for RLAN is enabled or disabled.
A value of 'true' indicates that
Central DHCP is enabled.
A value of 'false' indicates that
Central DHCP is disabled. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| ciscoLwappRlanCompliance |
1.3.6.1.4.1.9.9.856.2.1.1 |
| The compliance statement for the SNMP entities that
implement the ciscoLwappRlanMIB module. |
| Status: current |
Access: read-write |
| MODULE-COMPLIANCE |
|
|
|
| ciscoLwappRlanConfigGroup1 |
1.3.6.1.4.1.9.9.856.2.2.1 |
| This collection of objects represents the
RLAN policy attributes. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| ciscoLwappRlanConfigGroup2 |
1.3.6.1.4.1.9.9.856.2.2.2 |
| This collection of objects represents the
RLAN profile policy attributes. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|