CISCO-DMN-DSG-MOIPINPUT-MIB

File: CISCO-DMN-DSG-MOIPINPUT-MIB.mib (13244 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
CISCO-DMN-DSG-ROOT-MIB

Imported symbols

OBJECT-TYPE MODULE-IDENTITY Integer32
IpAddress DisplayString RowStatus
OBJECT-GROUP MODULE-COMPLIANCE ciscoDSGUtilities

Defined Types

MOIPInputSrcSelectEntry  
SEQUENCE    
  moipInputSrcSelectIdx INTEGER
  moipInputSrcSelectV4IPAddr IpAddress
  moipInputSrcSelectData1Sel INTEGER
  moipInputSrcSelectData2Sel INTEGER
  moipInputSrcSelectData1Avail INTEGER
  moipInputSrcSelectData2Avail INTEGER
  moipInputSrcSelectData1Enabled INTEGER
  moipInputSrcSelectData2Enabled INTEGER
  moipInputSrcSelectRowEnabled INTEGER

MOIPInputSrcFilterEntry  
SEQUENCE    
  moipInputSrcFilterIdx INTEGER
  moipInputSrcFilterV4IPAddr IpAddress
  moipInputSrcFilterRowStatus RowStatus

MOIPInputFlowEntry  
SEQUENCE    
  moipInputFlowID INTEGER
  moipInputFlowTsAct INTEGER
  moipInputFlowFecColStrmAct INTEGER
  moipInputFlowFecRowStrmAct INTEGER

Defined Values

ciscoDSGMOIPInput 1.3.6.1.4.1.1429.2.2.5.41
Cisco generic MOIP Input MIB.
MODULE-IDENTITY    

moipInputInfo 1.3.6.1.4.1.1429.2.2.5.41.1
OBJECT IDENTIFIER    

moipInputTable 1.3.6.1.4.1.1429.2.2.5.41.2
OBJECT IDENTIFIER    

moipInputFlowIsMulticast 1.3.6.1.4.1.1429.2.2.5.41.1.1
Delivery Type: Multicast or Unicast.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

moipInputFlowMulticastDstIPV4 1.3.6.1.4.1.1429.2.2.5.41.1.2
Muticast V4 IP Address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

moipInputFlowFecMode 1.3.6.1.4.1.1429.2.2.5.41.1.3
FEC Mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), oneD(2), twoD(3)  

moipInputFlowSrcFilter 1.3.6.1.4.1.1429.2.2.5.41.1.4
Source Filtering Mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), whiteList(2), blackList(3)  

moipInputFlowTsUDPPort 1.3.6.1.4.1.1429.2.2.5.41.1.5
UDP Port for Transport Stream.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65534  

moipInputFlowFec1UDPPort 1.3.6.1.4.1.1429.2.2.5.41.1.6
UDP Port for FEC Columns Stream in step of 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 2..65534  

moipInputFlowFec2UDPPort 1.3.6.1.4.1.1429.2.2.5.41.1.7
UDP Port for FEC Rows Stream in step of 2.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 2..65534  

moipInputFlowSrcStrmSel 1.3.6.1.4.1.1429.2.2.5.41.1.8
Selects how to lock to source IP. In SwMap, first source present on both data ports is selected. In UserCfg, user selected source ip is locked per port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER swMap(1), userCfg(2)  

moipInputDejitterAlgorithm 1.3.6.1.4.1.1429.2.2.5.41.1.9
Dejitter Algorithm.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER cbr(1), vbr(2)  

moipInputDejitterBufLatency 1.3.6.1.4.1.1429.2.2.5.41.1.10
Dejitter Buffer Latency.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

moipInputRednMode 1.3.6.1.4.1.1429.2.2.5.41.1.11
Input Redundancy Mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER bkpPriData1(1), bkpPriData2(2), manualData1(3), manualData2(4)  

moipInputRednDir 1.3.6.1.4.1.1429.2.2.5.41.1.12
IPI Redundancy Switch Over Type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER revertive(1), nonrevertive(2)  

moipInputRednDelayDir 1.3.6.1.4.1.1429.2.2.5.41.1.13
Direct Redundancy Switch Over Delay in msec.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..10000  

moipInputRednDelRev 1.3.6.1.4.1.1429.2.2.5.41.1.14
Revertive Redundancy Switch Over Delay in sec.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..30  

moipInputRednPortInUse 1.3.6.1.4.1.1429.2.2.5.41.1.15
Redundancy: Port In use.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

moipInputRednSwReason 1.3.6.1.4.1.1429.2.2.5.41.1.16
Reason for port Switch Over: None, Setup, EthLinkLoss, UdpLoss, PrgmLoss.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

moipInputRednSwDateTime 1.3.6.1.4.1.1429.2.2.5.41.1.17
Redundancy: Switch Over date and time.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

moipInputData1SelIPV4 1.3.6.1.4.1.1429.2.2.5.41.1.18
Select this host for DATA1 port. This object replaces moipInputSrcSelectData1Sel for backup and restore purpose and should not be used by any UIs.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

moipInputData2SelIPV4 1.3.6.1.4.1.1429.2.2.5.41.1.19
Select this host for DATA2 port. This object replaces moipInputSrcSelectData2Sel for backup and restore purpose and should not be used by any UIs.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

moipInputSrcSelectTable 1.3.6.1.4.1.1429.2.2.5.41.2.1
MOIP input source IP select table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MOIPInputSrcSelectEntry

moipInputSrcSelectEntry 1.3.6.1.4.1.1429.2.2.5.41.2.1.1
Entry for source IP select table.
Status: current Access: not-accessible
OBJECT-TYPE    
  MOIPInputSrcSelectEntry  

moipInputSrcSelectIdx 1.3.6.1.4.1.1429.2.2.5.41.2.1.1.1
Host Index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

moipInputSrcSelectV4IPAddr 1.3.6.1.4.1.1429.2.2.5.41.2.1.1.2
Host IP Address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

moipInputSrcSelectData1Sel 1.3.6.1.4.1.1429.2.2.5.41.2.1.1.3
The host selected for DATA1 port. Use moipInputData1SelIPV4 to select.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

moipInputSrcSelectData2Sel 1.3.6.1.4.1.1429.2.2.5.41.2.1.1.4
The host selected for DATA2 port. Use moipInputData2SelIPV4 to select.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

moipInputSrcSelectData1Avail 1.3.6.1.4.1.1429.2.2.5.41.2.1.1.5
Stream from this host is present on DATA1 port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

moipInputSrcSelectData2Avail 1.3.6.1.4.1.1429.2.2.5.41.2.1.1.6
Stream from this host is present on DATA2 port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

moipInputSrcSelectData1Enabled 1.3.6.1.4.1.1429.2.2.5.41.2.1.1.7
This host can be selected for DATA1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

moipInputSrcSelectData2Enabled 1.3.6.1.4.1.1429.2.2.5.41.2.1.1.8
This host can be selected for DATA2.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

moipInputSrcSelectRowEnabled 1.3.6.1.4.1.1429.2.2.5.41.2.1.1.9
Rows disabled should be hidden from user.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

moipInputSrcFilterTable 1.3.6.1.4.1.1429.2.2.5.41.2.2
MOIP input source IP filter table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MOIPInputSrcFilterEntry

moipInputSrcFilterEntry 1.3.6.1.4.1.1429.2.2.5.41.2.2.1
Entry for source IP filter table.
Status: current Access: not-accessible
OBJECT-TYPE    
  MOIPInputSrcFilterEntry  

moipInputSrcFilterIdx 1.3.6.1.4.1.1429.2.2.5.41.2.2.1.1
Source IP Filter Index.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..16  

moipInputSrcFilterV4IPAddr 1.3.6.1.4.1.1429.2.2.5.41.2.2.1.2
Source IP to be filtered.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

moipInputSrcFilterRowStatus 1.3.6.1.4.1.1429.2.2.5.41.2.2.1.3
Source Filter IP row status.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

moipInputFlowTable 1.3.6.1.4.1.1429.2.2.5.41.2.3
DPM Configuration Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MOIPInputFlowEntry

moipInputFlowEntry 1.3.6.1.4.1.1429.2.2.5.41.2.3.1
Entry for DPM global configuration table.
Status: current Access: not-accessible
OBJECT-TYPE    
  MOIPInputFlowEntry  

moipInputFlowID 1.3.6.1.4.1.1429.2.2.5.41.2.3.1.1
Flow ID.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2  

moipInputFlowTsAct 1.3.6.1.4.1.1429.2.2.5.41.2.3.1.2
Flow Transport Stream Active.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

moipInputFlowFecColStrmAct 1.3.6.1.4.1.1429.2.2.5.41.2.3.1.3
Flow FEC Column Stream Active.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

moipInputFlowFecRowStrmAct 1.3.6.1.4.1.1429.2.2.5.41.2.3.1.4
Flow FEC Row Stream Active.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor