CISCO-DMN-DSG-MOIP-MIB

File: CISCO-DMN-DSG-MOIP-MIB.mib (14801 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	SNMPv2-CONF
CISCO-DMN-DSG-ROOT-MIB

Imported symbols

OBJECT-TYPE	MODULE-IDENTITY	Integer32
IpAddress	DisplayString	OBJECT-GROUP
MODULE-COMPLIANCE	ciscoDSGUtilities

Defined Types

MOIPIPOConfigEntry
SEQUENCE
	moipIPOConfigID	Integer32
	moipIPOConfigOutputEnabled	INTEGER
	moipIPOConfigInstanceName	DisplayString
	moipIPOConfigTPProtocol	INTEGER
	moipIPOConfigIPVer	DisplayString
	moipIPOConfigDestIPAddr	IpAddress
	moipIPOConfigSAPMulticastIPAddr	IpAddress
	moipIPOConfigDestPort	Integer32
	moipIPOConfigSrcPort	Integer32
	moipIPOConfigMinIPPerSec	Integer32
	moipIPOConfigPCRAddition	INTEGER
	moipIPOConfigPCRStartNewPkt	INTEGER
	moipIPOConfigSendSAP	INTEGER
	moipIPOConfigUseSAPStr	INTEGER
	moipIPOConfigMaxTransPktPerIP	Integer32
	moipIPOConfigSAPStr	DisplayString
	moipIPOConfigInterfaceMode	INTEGER
	moipIPOConfigBitRate	Integer32
	moipIPOConfigTOS	Integer32
	moipIPOConfigTTL	Integer32
	moipIPOConfigSAPDestPort	Integer32
	moipIPOFECMode	INTEGER
	moipIPOFECColDepth	Integer32
	moipIPOFECRowWidth	Integer32
	moipIPOAnnexType	INTEGER
	moipIPOFEC1UDPPort	Integer32
	moipIPOFEC2UDPPort	Integer32

MOIPIPOStreamStatusEntry
SEQUENCE
	moipIPOStreamStatusID	Integer32
	moipIPOStreamStatusIntf1	INTEGER
	moipIPOStreamStatusIntf2	INTEGER
	moipIPOStreamStatusContentOvfl	INTEGER
	moipIPOStreamStatusLinkOvfl	INTEGER

Defined Values

ciscoDSGMOIP		1.3.6.1.4.1.1429.2.2.5.35
Cisco MOIP MIB.
MODULE-IDENTITY

moipIPOTable		1.3.6.1.4.1.1429.2.2.5.35.1
OBJECT IDENTIFIER

moipIPOConfigTable		1.3.6.1.4.1.1429.2.2.5.35.1.1
MOIP IP Output Table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MOIPIPOConfigEntry

moipIPOConfigEntry		1.3.6.1.4.1.1429.2.2.5.35.1.1.1
Entry for DPM Aligned PMT table.
Status: current	Access: not-accessible
OBJECT-TYPE
	MOIPIPOConfigEntry

moipIPOConfigID		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.1
MPEG Over IP Output Instance ID .
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..1

moipIPOConfigOutputEnabled		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.2
MPEG Over IP Output is enabled.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(3)

moipIPOConfigInstanceName		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.3
MPEG Over IP Output Name.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

moipIPOConfigTPProtocol		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.4
Transport Protocol to be used: UDP/ RPT.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	udp(1), rtp(2)

moipIPOConfigIPVer		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.5
Internet Protocol version of the destination IP address:IPv4/IPv6.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

moipIPOConfigDestIPAddr		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.6
MPEG Over IP Destination IP Address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

moipIPOConfigSAPMulticastIPAddr		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.7
MPEG Over IP Destination IP Address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

moipIPOConfigDestPort		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.8
Source UDP Port - 0 allows automatic Port Selection, enter a value to override..
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..65534

moipIPOConfigSrcPort		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.9
Source UDP Port - 0 allows automatic Port Selection, enter a value to override..
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..65535

moipIPOConfigMinIPPerSec		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.10
Minimum Number of IP Packets to be sent per second.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..65535

moipIPOConfigPCRAddition		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.11
Program Clock Reference Addition. This OID is read only on D9824, D9854-i and D9859
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

moipIPOConfigPCRStartNewPkt		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.12
Enabling new Ethernet Packet when new Program Clock Reference arrives.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	no(1), yes(2)

moipIPOConfigSendSAP		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.13
Send SAP Messages.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), rfc2327(2)

moipIPOConfigUseSAPStr		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.14
User Configured SAP String or PE1 SDT Channel name as the Transport Name in the SAP.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	userString(1), sdtChName(2)

moipIPOConfigMaxTransPktPerIP		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.15
Maximum Number of Transport Packets per IP Packet.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..7

moipIPOConfigSAPStr		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.16
User configured Session Announcement Protocol Transport Name to be used when DPMIPOConfigUseSAPStr is set to 'YES'.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

moipIPOConfigInterfaceMode		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.17
MPEG Over IP Output port selection.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), data1(2), data2(3), both(4), redundancy(5)

moipIPOConfigBitRate		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.18
Maxmum ASI output rate in Mbps with scaling factor of 6.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..206000000

moipIPOConfigTOS		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.19
TOS field in IP header. This is an 8 bits field divided into 5 sub-fields namely Precedence, D, T, R and Unused.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..255

moipIPOConfigTTL		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.20
Time to live. This is an 8 bits fiels that defines how many hops an IP datagram can travel through.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..255

moipIPOConfigSAPDestPort		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.21
SAP Destination Port Number.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..65534

moipIPOFECMode		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.22
FEC Mode.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	none(1), oneD(2), twoD(3)

moipIPOFECColDepth		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.23
FEC Column Depth (L Value).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..20

moipIPOFECRowWidth		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.24
FEC Row Width (D Value).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..20

moipIPOAnnexType		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.25
FEC arrangement : Non block-aligned (Annex A in Pro-MPEG FEC, Annex B in SMPTE 2022), Block-aligned (Annex B in Pro-MPEG FEC, Annex C in SMPTE-2022).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	annexA(1), annexB(2)

moipIPOFEC1UDPPort		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.26
UDP Port for FEC Columns Stream in step of 2.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	2..65534

moipIPOFEC2UDPPort		1.3.6.1.4.1.1429.2.2.5.35.1.1.1.27
UDP Port for FEC Rows Stream in step of 2.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	2..65534

moipIPOStreamStatusTable		1.3.6.1.4.1.1429.2.2.5.35.1.2
MOIP IP Output Table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		MOIPIPOStreamStatusEntry

moipIPOStreamStatusEntry		1.3.6.1.4.1.1429.2.2.5.35.1.2.1
Entry for DPM Aligned PMT table.
Status: current	Access: not-accessible
OBJECT-TYPE
	MOIPIPOStreamStatusEntry

moipIPOStreamStatusID		1.3.6.1.4.1.1429.2.2.5.35.1.2.1.1
MPEG Over IP Output Instance ID .
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..32

moipIPOStreamStatusIntf1		1.3.6.1.4.1.1429.2.2.5.35.1.2.1.2
Stream Status, Ethernet Port 1.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notInit(1), stopped(2), suspended(3), muted(4), active(5)

moipIPOStreamStatusIntf2		1.3.6.1.4.1.1429.2.2.5.35.1.2.1.3
Stream Status, Ethernet Port 2.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notInit(1), stopped(2), suspended(3), muted(4), active(5)

moipIPOStreamStatusContentOvfl		1.3.6.1.4.1.1429.2.2.5.35.1.2.1.4
Content Overflow.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

moipIPOStreamStatusLinkOvfl		1.3.6.1.4.1.1429.2.2.5.35.1.2.1.5
Link Overflow.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

moipIPOInfo		1.3.6.1.4.1.1429.2.2.5.35.2
OBJECT IDENTIFIER

moipIPOStatsHWGlobalError		1.3.6.1.4.1.1429.2.2.5.35.2.1
Critical MPEG over IP Engine Failure.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

moipIPOStatsStreamError		1.3.6.1.4.1.1429.2.2.5.35.2.2
MPEG over IP TS Overflow.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	no(1), yes(2)

moipIPOStatsBandwidthConf		1.3.6.1.4.1.1429.2.2.5.35.2.3
Combined User Rate (Mbps).
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

moipIPOStatsBandwidthActIntf1		1.3.6.1.4.1.1429.2.2.5.35.2.4
Actual Rate (Mbps), Ethernet Port 1.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)

moipIPOStatsBandwidthActIntf2		1.3.6.1.4.1.1429.2.2.5.35.2.5
Actual Rate (Mbps), Ethernet Port 2.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..10)