CISCO-DMN-DSG-FAULT-MIB

File: CISCO-DMN-DSG-FAULT-MIB.mib (15849 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
CISCO-DMN-DSG-ROOT-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Counter32 DisplayString OBJECT-GROUP
MODULE-COMPLIANCE ciscoDSGUtilities

Defined Types

AWFaultActiveListEntry  
SEQUENCE    
  awFaultActiveListPriority Integer32
  awFaultActiveListTextID DisplayString
  awFaultActiveListName DisplayString
  awFaultActiveListType INTEGER
  awFaultActiveListSetDateTime DisplayString
  awFaultActiveListDetails DisplayString

AWFaultStatusEntry  
SEQUENCE    
  awFaultStatusPriority Integer32
  awFaultStatusTextId DisplayString
  awFaultStatusFaultNum DisplayString
  awFaultStatusName DisplayString
  awFaultStatusType INTEGER
  awFaultStatusSeverity INTEGER
  awFaultStatusLastDateTime DisplayString
  awFaultStatusTrapState INTEGER
  awFaultStatusDetails DisplayString
  awFaultStatusRelay DisplayString

AWFaultSettingEntry  
SEQUENCE    
  awFaultSettingPriority Integer32
  awFaultSettingTextId DisplayString
  awFaultSettingType INTEGER
  awFaultSettingSeverity INTEGER
  awFaultSettingName DisplayString
  awFaultSettingEnable INTEGER
  awFaultSettingRelay INTEGER
  awFaultSettingTrap INTEGER

AWFaultHistoryEntry  
SEQUENCE    
  awFaultHistorySequence Counter32
  awFaultHistoryName DisplayString
  awFaultHistoryType INTEGER
  awFaultHistorySetDateTime DisplayString
  awFaultHistoryResetDateTime DisplayString
  awFaultHistoryState INTEGER
  awFaultHistoryDetails DisplayString

Defined Values

ciscoDSGFault 1.3.6.1.4.1.1429.2.2.5.17
Cisco DSG Fault Information MIB.
MODULE-IDENTITY    

faultSummary 1.3.6.1.4.1.1429.2.2.5.17.1
OBJECT IDENTIFIER    

faultAWTable 1.3.6.1.4.1.1429.2.2.5.17.2
OBJECT IDENTIFIER    

faultSummaryNumActiveAlarms 1.3.6.1.4.1.1429.2.2.5.17.1.1
Number of system alarms currently in a set state. The range is from 0 to 4294967295.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

faultSummaryNumActiveWarnings 1.3.6.1.4.1.1429.2.2.5.17.1.2
Number of system Warnings currently in a set state. THe range is from 0 to 4294967295.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

faultSummaryClearAlarms 1.3.6.1.4.1.1429.2.2.5.17.1.3
Set this object to yes( 2 ) to clear the system Alarms.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER writeonly(1), yes(2)  

faultSummaryClearWarnings 1.3.6.1.4.1.1429.2.2.5.17.1.4
Set this object to yes( 2 ) to clear the system Warnings.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER writeOnly(1), yes(2)  

faultSummaryClearHistory 1.3.6.1.4.1.1429.2.2.5.17.1.5
Set this object to yes( 2 ) to clear the system History.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER writeOnly(1), yes(2)  

awFaultActiveListTable 1.3.6.1.4.1.1429.2.2.5.17.2.1
Alarms and warnings fault active list table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AWFaultActiveListEntry

awFaultActiveListEntry 1.3.6.1.4.1.1429.2.2.5.17.2.1.1
Entry for alarms and warnings fault active list.
Status: current Access: not-accessible
OBJECT-TYPE    
  AWFaultActiveListEntry  

awFaultActiveListPriority 1.3.6.1.4.1.1429.2.2.5.17.2.1.1.1
Priority of fault.Higher priority faults are displayed first.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

awFaultActiveListTextID 1.3.6.1.4.1.1429.2.2.5.17.2.1.1.2
Fault ID.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

awFaultActiveListName 1.3.6.1.4.1.1429.2.2.5.17.2.1.1.3
Faults displayed text.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

awFaultActiveListType 1.3.6.1.4.1.1429.2.2.5.17.2.1.1.4
Active list type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER alarm(1), warning(2)  

awFaultActiveListSetDateTime 1.3.6.1.4.1.1429.2.2.5.17.2.1.1.5
Date and time of fault condition occurred.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

awFaultActiveListDetails 1.3.6.1.4.1.1429.2.2.5.17.2.1.1.6
Fault description.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..63)  

awFaultStatusTable 1.3.6.1.4.1.1429.2.2.5.17.2.2
Alarms and warnings fault status.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AWFaultStatusEntry

awFaultStatusEntry 1.3.6.1.4.1.1429.2.2.5.17.2.2.1
Entry for Alarms and warnings fault status.
Status: current Access: not-accessible
OBJECT-TYPE    
  AWFaultStatusEntry  

awFaultStatusPriority 1.3.6.1.4.1.1429.2.2.5.17.2.2.1.1
Fault status Priority value.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

awFaultStatusTextId 1.3.6.1.4.1.1429.2.2.5.17.2.2.1.2
Fault Status Text ID.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

awFaultStatusFaultNum 1.3.6.1.4.1.1429.2.2.5.17.2.2.1.3
Fault Status number.The range is from 0 to 4294967295.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

awFaultStatusName 1.3.6.1.4.1.1429.2.2.5.17.2.2.1.4
Fault displayed text.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

awFaultStatusType 1.3.6.1.4.1.1429.2.2.5.17.2.2.1.5
Fault Status type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER alarm(1), warning(2)  

awFaultStatusSeverity 1.3.6.1.4.1.1429.2.2.5.17.2.2.1.6
Fault severity.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER major(1), minor(2), warning(3), information(4)  

awFaultStatusLastDateTime 1.3.6.1.4.1.1429.2.2.5.17.2.2.1.7
Date&time of faults last state change.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

awFaultStatusTrapState 1.3.6.1.4.1.1429.2.2.5.17.2.2.1.8
Trap state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER clear(1), set(2)  

awFaultStatusDetails 1.3.6.1.4.1.1429.2.2.5.17.2.2.1.9
Faults descriptive reason.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

awFaultStatusRelay 1.3.6.1.4.1.1429.2.2.5.17.2.2.1.10
Fault Relay control status.The range is from 0 to 8. Indicates which relay output this fault is hardcoded to control. Not used.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

awFaultSettingTable 1.3.6.1.4.1.1429.2.2.5.17.2.3
Faults settings Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AWFaultSettingEntry

awFaultSettingEntry 1.3.6.1.4.1.1429.2.2.5.17.2.3.1
Entry for Faults settings Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AWFaultSettingEntry  

awFaultSettingPriority 1.3.6.1.4.1.1429.2.2.5.17.2.3.1.1
Fault Setting Index (Fault Priority value).
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

awFaultSettingTextId 1.3.6.1.4.1.1429.2.2.5.17.2.3.1.2
Fault Setting Text ID.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

awFaultSettingType 1.3.6.1.4.1.1429.2.2.5.17.2.3.1.3
Fault type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER alarm(1), warning(2)  

awFaultSettingSeverity 1.3.6.1.4.1.1429.2.2.5.17.2.3.1.4
Fault severity.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER major(1), minor(2), warning(3), information(4)  

awFaultSettingName 1.3.6.1.4.1.1429.2.2.5.17.2.3.1.5
Fault displayed text.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

awFaultSettingEnable 1.3.6.1.4.1.1429.2.2.5.17.2.3.1.6
Controls overall enabling of this Fault.Affects LEDs, Relays, and Traps. disabled(3) is a read-only value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2), disabled(3)  

awFaultSettingRelay 1.3.6.1.4.1.1429.2.2.5.17.2.3.1.7
Controls whether Relays are enabled for the Fault. disabled(3) is a read-only value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2), disabled(3)  

awFaultSettingTrap 1.3.6.1.4.1.1429.2.2.5.17.2.3.1.8
Controls whether Traps are enabled for the Fault. disabled(3) is a read-only value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2), disabled(3)  

awFaultHistoryTable 1.3.6.1.4.1.1429.2.2.5.17.2.5
Fault History table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AWFaultHistoryEntry

awFaultHistoryEntry 1.3.6.1.4.1.1429.2.2.5.17.2.5.1
Entry for Fault History table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AWFaultHistoryEntry  

awFaultHistorySequence 1.3.6.1.4.1.1429.2.2.5.17.2.5.1.1
Fault History sequence number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Counter32  

awFaultHistoryName 1.3.6.1.4.1.1429.2.2.5.17.2.5.1.2
Fault displayed text.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

awFaultHistoryType 1.3.6.1.4.1.1429.2.2.5.17.2.5.1.3
Fault History list Type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER alarm(1), warning(2)  

awFaultHistorySetDateTime 1.3.6.1.4.1.1429.2.2.5.17.2.5.1.4
Faults set date and time.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

awFaultHistoryResetDateTime 1.3.6.1.4.1.1429.2.2.5.17.2.5.1.5
Faults reset date and time. If cleared by reset, contains the power-up time.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..32)  

awFaultHistoryState 1.3.6.1.4.1.1429.2.2.5.17.2.5.1.6
Fault History list state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER clear(1), set(2), clearByReset(3)  

awFaultHistoryDetails 1.3.6.1.4.1.1429.2.2.5.17.2.5.1.7
Fault descriptive Reason.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..63)  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor