CISCO-DMN-DSG-DISEQC-DISH-POSITION-MIB
File:
CISCO-DMN-DSG-DISEQC-DISH-POSITION-MIB.mib (7665 bytes)
Imported modules
Imported symbols
Defined Types
| DiSEqCEntry |
|
| SEQUENCE |
|
|
|
| |
diSEqCInstance |
Integer32 |
|
| |
diSEqCEnable |
INTEGER |
|
| |
diSEqCDishPosition |
Integer32 |
|
| |
diSEqCPositionJog |
INTEGER |
|
| |
diSEqCEWFlag |
INTEGER |
|
| |
diSEqCSatSelect |
Integer32 |
|
| |
diSEqCInstallerAction |
INTEGER |
|
| |
diSEqCUserAction |
INTEGER |
|
| |
diSEqCMode |
INTEGER |
|
| |
diSEqCAction |
INTEGER |
|
| |
diSEqCStatusMode |
INTEGER |
|
| |
diSEqCStatusDishPosition |
DisplayString |
|
| |
diSEqCStatusEastWestFlag |
INTEGER |
|
| |
diSEqCStatusLastAction |
INTEGER |
|
| |
diSEqCStatusEnable |
INTEGER |
|
Defined Values
| ciscoDSGDiSEqC |
1.3.6.1.4.1.1429.2.2.5.19 |
| Cisco DiSEqC Dish Position MIB. |
| MODULE-IDENTITY |
|
|
|
| diSEqCTable |
1.3.6.1.4.1.1429.2.2.5.19.1 |
| DiSEqC Table. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
DiSEqCEntry |
|
| diSEqCEntry |
1.3.6.1.4.1.1429.2.2.5.19.1.1 |
| Entry for DiSEqC Table. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
DiSEqCEntry |
|
|
| diSEqCInstance |
1.3.6.1.4.1.1429.2.2.5.19.1.1.1 |
| Instance for DiSEqC Table. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..1 |
|
| diSEqCEnable |
1.3.6.1.4.1.1429.2.2.5.19.1.1.2 |
| DiSEqC On/off. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disable(1), enable(2) |
|
| diSEqCDishPosition |
1.3.6.1.4.1.1429.2.2.5.19.1.1.3 |
| Absolute Dish Position in steps of 1.
The scaling factor is 1/10. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..750 |
|
| diSEqCPositionJog |
1.3.6.1.4.1.1429.2.2.5.19.1.1.4 |
| Dish position fine adjustment - amount of steps
( each step is 2 degrees ). This is a diSEqc control object. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
writeOnly(1), coarseAdjustmentEast(2), coarseAdjustmentWest(3), fineAdjustmentEast(4), fineAdjustmentWest(5) |
|
| diSEqCEWFlag |
1.3.6.1.4.1.1429.2.2.5.19.1.1.5 |
| Dish direction. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
east(1), west(2), notApplicable(3) |
|
| diSEqCSatSelect |
1.3.6.1.4.1.1429.2.2.5.19.1.1.6 |
| Satellite Select. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
1..255 |
|
| diSEqCInstallerAction |
1.3.6.1.4.1.1429.2.2.5.19.1.1.7 |
| Installer Action. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(1), continuousWestMovement(2), continuousEastMovement(3), stopMove(4), gotoAbsolutePositionWest(5), gotoAbsolutePositionEast(6), gotoReference(7), gotoSatellite(8), storeSatellite(9), clearLimits(10), storeEastLimits(11), storeWestLimits(12), calculatePosition(13) |
|
| diSEqCUserAction |
1.3.6.1.4.1.1429.2.2.5.19.1.1.8 |
| User Action. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(1), gotoSatellite(2) |
|
| diSEqCMode |
1.3.6.1.4.1.1429.2.2.5.19.1.1.9 |
| Installation Mode,User has limited rights. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
installer(1), user(2) |
|
| diSEqCAction |
1.3.6.1.4.1.1429.2.2.5.19.1.1.10 |
| DiSEqC Control Action.Setting this MIB object to activate( 2 )
moves the dish to the position determined by the diSEqC
setting parameters. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
writeOnly(1), activate(2) |
|
| diSEqCStatusMode |
1.3.6.1.4.1.1429.2.2.5.19.1.1.11 |
| DiSEqC Mode Status. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
installer(1), user(2) |
|
| diSEqCStatusDishPosition |
1.3.6.1.4.1.1429.2.2.5.19.1.1.12 |
| Dish Position Status.The range is from 0.0 to 75.0 in
steps of 0.1. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..32) |
|
| diSEqCStatusEastWestFlag |
1.3.6.1.4.1.1429.2.2.5.19.1.1.13 |
| DiSEqC East/West Flag Status. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
east(1), west(2), notApplicable(3) |
|
| diSEqCStatusLastAction |
1.3.6.1.4.1.1429.2.2.5.19.1.1.14 |
| DiSEqC Status - Last Action. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
clear(1), coarseAdjustmentEast(2), coarseAdjustmenWest(3), fineAdjustmenEast(4), fineAdjustmentWest(5), installerAction(6), userAction(7) |
|
| diSEqCStatusEnable |
1.3.6.1.4.1.1429.2.2.5.19.1.1.15 |
| DiSEqC Status - Enable Status. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
disabled(1), enabled(2) |
|