CISCO-CABLE-L2VPN-MIB

File: CISCO-CABLE-L2VPN-MIB.mib (12581 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
INET-ADDRESS-MIB CISCO-IETF-PW-TC-MIB CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
MODULE-COMPLIANCE OBJECT-GROUP MacAddress
TEXTUAL-CONVENTION InetAddressType InetAddress
CpwVcIDType CpwVcType ciscoMgmt

Defined Types

CiscoCableL2vpnIndex  
TEXTUAL-CONVENTION    
  current Unsigned32 1..4294967295

Ccl2vpnMacVpnIdL2vpnIndexEntry  
SEQUENCE    
  ccl2vpnMac MacAddress
  ccl2vpnVpnId STRING
  ccl2vpnMacVpnIdToL2vpnIndex CiscoCableL2vpnIndex

Ccl2vpnPWL2vpnIndexEntry  
SEQUENCE    
  ccl2vpnPseudoWireType CpwVcType
  ccl2vpnPeerIPAddressType InetAddressType
  ccl2vpnPeerIPAddress InetAddress
  ccl2vpnVCID CpwVcIDType
  ccl2vpnPWToL2vpnIndex CiscoCableL2vpnIndex

Ccl2vpnL2vpnIndexPWEntry  
SEQUENCE    
  ccl2vpnL2vpnIndex CiscoCableL2vpnIndex
  ccl2vpnPWMAC MacAddress
  ccl2vpnPWVpnId STRING
  ccl2vpnPWPeerIPAddressType InetAddressType
  ccl2vpnPWPeerIPAddress InetAddress
  ccl2vpnPWType CpwVcType
  ccl2vpnPWVCID CpwVcIDType

Defined Values

ciscoCableL2vpnMIB 1.3.6.1.4.1.9.9.700
This MIB module defines managed objects that facilitate the management of Cisco devices complying to the DOCSIS L2VPN Feature for IP/MPLS pseudo-wire. The Cisco CMTS implementation of IP/MPLS pseudo-wire is based on DOCSIS BSOD L2VPN specification. The information available through this MIB includes: Mapping information between various configuration of the pseudo-wire pertaining to DOCSIS BSOD L2VPN. The MIB tables implemented give quick access to information using either Cable Modem MAC address/VPN, peer IP address/VCID or L2vpnIndex as index in tables. Glossary: CMTS - Cable Modem Termination System VCID - Virtual Circuit Identifier MPLS - Multi-Protocol Label Switching AToM - Any Transport Over MPLS DOCSIS - Data over Cable Service Interface Specification BSOD - Business Services over DOCSIS L2VPN - Layer 2 Virtual Private Network pseudo-wire - Layer 2 connection over IP/MPLS backbone
MODULE-IDENTITY    

ciscoCableL2vpnMIBNotifs 1.3.6.1.4.1.9.9.700.0
OBJECT IDENTIFIER    

ciscoCableL2vpnMIBObjects 1.3.6.1.4.1.9.9.700.1
OBJECT IDENTIFIER    

ciscoCableL2vpnMIBConform 1.3.6.1.4.1.9.9.700.2
OBJECT IDENTIFIER    

ccl2vpnMacVpnIdL2vpnIndexTable 1.3.6.1.4.1.9.9.700.1.1
Every L2VPN provisioned Cable Modem can be a part of multiple VPNs and the CMTS assigns a L2vpnIndex for each {Cable Modem MAC address, VPN-id} pair. This table maps {Cable Modem MAC address, VPN-id} to the L2vpnIndex.
OBJECT-TYPE    
  SEQUENCE OF  
    Ccl2vpnMacVpnIdL2vpnIndexEntry

ccl2vpnMacVpnIdL2vpnIndexEntry 1.3.6.1.4.1.9.9.700.1.1.1
Each row contains the Cable Modem MAC address and VPN identifier and the corresponding L2vpnIndex. Entry in this table is populated for each one of the pseudo-wire provisioned on the CMTS.
OBJECT-TYPE    
  Ccl2vpnMacVpnIdL2vpnIndexEntry  

ccl2vpnMac 1.3.6.1.4.1.9.9.700.1.1.1.1
This object identifies the Cable Modem MAC address.
OBJECT-TYPE    
  MacAddress  

ccl2vpnVpnId 1.3.6.1.4.1.9.9.700.1.1.1.2
This object identifies the VPN provisioned for L2VPN Cable Modem.
OBJECT-TYPE    
  STRING Size(1..16)  

ccl2vpnMacVpnIdToL2vpnIndex 1.3.6.1.4.1.9.9.700.1.1.1.3
This object identifies the L2vpnIndex assigned for this Cable Modem MAC Address/VPN pair by the CMTS.
OBJECT-TYPE    
  CiscoCableL2vpnIndex  

ccl2vpnPWL2vpnIndexTable 1.3.6.1.4.1.9.9.700.1.2
Every L2VPN Cable Modem can be provisioned with multiple VPNs and for each {Cable Modem MAC address, VPN-id} pair, there is a IP/MPLS pseudo-wire established. The pseudo-wire is specified by {peer IP address, VCID}. This table maps {peer IP address, VCID} to the L2vpnIndex.
OBJECT-TYPE    
  SEQUENCE OF  
    Ccl2vpnPWL2vpnIndexEntry

ccl2vpnPWL2vpnIndexEntry 1.3.6.1.4.1.9.9.700.1.2.1
Each row contains the pseudo-wire peer IP address and Virtual Circuit Identifier (VCID) and the corresponding L2vpnIndex. Entry in this table is populated for each one of the pseudo-wire provisioned on the CMTS.
OBJECT-TYPE    
  Ccl2vpnPWL2vpnIndexEntry  

ccl2vpnPseudoWireType 1.3.6.1.4.1.9.9.700.1.2.1.1
This object identifies the pseudo-wire type.
OBJECT-TYPE    
  CpwVcType  

ccl2vpnPeerIPAddressType 1.3.6.1.4.1.9.9.700.1.2.1.2
This object identifies the pseudo-wire peer IP address type provisioned for L2VPN.
OBJECT-TYPE    
  InetAddressType  

ccl2vpnPeerIPAddress 1.3.6.1.4.1.9.9.700.1.2.1.3
This object identifies the pseudo-wire peer IP address provisioned for L2VPN. The type of this address is determined by the value of ccl2vpnPeerIPAddressType object.
OBJECT-TYPE    
  InetAddress  

ccl2vpnVCID 1.3.6.1.4.1.9.9.700.1.2.1.4
This object identifies the Virtual Circuit Identifier (VCID) of the pseudo-wire.
OBJECT-TYPE    
  CpwVcIDType  

ccl2vpnPWToL2vpnIndex 1.3.6.1.4.1.9.9.700.1.2.1.5
This object identifies the L2vpnIndex assigned by CMTS for this pseudo-wire peer IP address/VCID pair and for this Cable Modem MAC Address/VPN.
OBJECT-TYPE    
  CiscoCableL2vpnIndex  

ccl2vpnL2vpnIndexPWTable 1.3.6.1.4.1.9.9.700.1.3
For every VPN provisioned for the L2VPN Cable Modem, the CMTS establishes pseudo-wire. This table maps L2vpnIndex to pseudo-wire configuration parameters.
OBJECT-TYPE    
  SEQUENCE OF  
    Ccl2vpnL2vpnIndexPWEntry

ccl2vpnL2vpnIndexPWEntry 1.3.6.1.4.1.9.9.700.1.3.1
Each row contains the L2vpnIndex for the pseudo-wire and the corresponding configuration paramters including the Cable Modem MAC address, VPN identifier, peer IP address, Virtual Circuit Identifier (VCID) and pseudo-wire type. Entry in this table is populated for each one of the pseudo-wire provisioned on the CMTS.
OBJECT-TYPE    
  Ccl2vpnL2vpnIndexPWEntry  

ccl2vpnL2vpnIndex 1.3.6.1.4.1.9.9.700.1.3.1.1
This object identifies the L2vpnIndex assigned for this Cable Modem MAC Address/VPN pair by the CMTS.
OBJECT-TYPE    
  CiscoCableL2vpnIndex  

ccl2vpnPWMAC 1.3.6.1.4.1.9.9.700.1.3.1.2
This object identifies the Cable Modem MAC address.
OBJECT-TYPE    
  MacAddress  

ccl2vpnPWVpnId 1.3.6.1.4.1.9.9.700.1.3.1.3
This object identifies the VPN Identifier provisioned for L2VPN Cable Modem.
OBJECT-TYPE    
  STRING Size(1..16)  

ccl2vpnPWPeerIPAddressType 1.3.6.1.4.1.9.9.700.1.3.1.4
This object identifies the pseudo-wire peer IP address type.
OBJECT-TYPE    
  InetAddressType  

ccl2vpnPWPeerIPAddress 1.3.6.1.4.1.9.9.700.1.3.1.5
This object identifies the pseudo-wire peer IP address. The type of this address is determined by the value of ccl2vpnPWPeerIPAddressType object.
OBJECT-TYPE    
  InetAddress  

ccl2vpnPWType 1.3.6.1.4.1.9.9.700.1.3.1.6
This object identifies the pseudo-wire type.
OBJECT-TYPE    
  CpwVcType  

ccl2vpnPWVCID 1.3.6.1.4.1.9.9.700.1.3.1.7
This object identifies the Virtual Circuit Identifier (VCID) for pseudo-wire.
OBJECT-TYPE    
  CpwVcIDType  

ccl2vpnMIBCompliances 1.3.6.1.4.1.9.9.700.2.1
OBJECT IDENTIFIER    

ccl2vpnMIBGroups 1.3.6.1.4.1.9.9.700.2.2
OBJECT IDENTIFIER    

ccl2vpnMIBCompliance 1.3.6.1.4.1.9.9.700.2.1.1
The compliance statement for the CISCO-CABLE-L2VPN-MIB.
MODULE-COMPLIANCE    

ccl2vpnPWMappingGroup 1.3.6.1.4.1.9.9.700.2.2.1
A collection of objects providing Cable L2VPN pseudo-wire configuration.
OBJECT-GROUP