CENTILLION-ROOT-MIB

File: CENTILLION-ROOT-MIB.mib (16289 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB SNMPv2-SMI
RFC-1212

Imported symbols

enterprises DisplayString Counter32
OBJECT-TYPE

Defined Types

StatusIndicator  
INTEGER valid(1), invalid(2)    

SsBackplaneType  
INTEGER other(1), atmBus(2)    

SsChassisType  
INTEGER other(1), six-slot(2), twelve-slot(3), workgroup(4), three-slotC50N(5), three-slotC50T(6), six-slotBH5005(7)    

SsModuleType  
INTEGER empty(1), other(2), mTR4PC(3), mTRMCP4PC(4), mATM(5), mTRFiber(6), mTRMCPFiber(7), mEther16PC10BT(8), mEtherMCP8PC10BT(9), mATM2PSMFiber(10), mATM2PCopper(11), mATM4PMMFiber(12), mATM4PSMFiber(13), mATM4PCopper(14), mATMMCP2PSMFiber(15), mATMMCP2PMMFiber(16), mATMMCP2PCopper(17), mATMMCP4PSMFiber(18), mATMMCP4PMMFiber(19), mATMMCP4PCopper(20), mATM2PC(21), mATM4PC(22), mATMMCP2PC(23), mATMMCP4PC(24), mEther16P10BT100BTCopper(25), mEther14P10BT100BF(26), mEther8P10BF(27), mEther10P10BT100BT(28), mEther16P10BT100BTMixed(29), mEther10P10BT100BTMIX(30), mEther12PBFL(32), mEther16P4x4(33), mTRMCP8PC(34), mTR8PC(35), mEther24PC(36), mEther24P10BT100BT(37), mEther24P100BFx(38), mTR8PFiber(39), mATM4PMDA(40), mATMMCP4PMDA(41), mEther4P100BT(42), mTR24PC(43), mTR16PC(44), mATMMCP1PSMFiber(45), mATMMCP1PMMFiber(46), mATM1PMMFiber(47), mATM1PVNR(48), mEther24P10BT100BTx(49), mEther24P100BFX(50)    

SsMediaType  
INTEGER mediaUnkown(1), mediaTokenRing(2), mediaFDDI(3), mediaEthernet(4), mediaATM(5)    

MacAddress  
STRING Size(6)    

Boolean  
INTEGER true(1), false(2)    

BitField  
INTEGER clear(1), set(2)    

PortId  
INTEGER 1..65535    

CardId  
INTEGER 1..16    

FailIndicator  
INTEGER on(1), off(2)    

EnableIndicator  
INTEGER disabled(1), enabled(2)    

SlotConfigEntry  
SEQUENCE    
  slotNumber INTEGER
  slotModuleType SsModuleType
  slotModuleSerialNumber STRING
  slotModuleHwVer STRING
  slotModuleSwVer DisplayString
  slotModuleStatus INTEGER
  slotModuleLeds STRING
  slotModuleReset INTEGER
  slotConfigDelete Boolean
  slotConfigMediaType SsMediaType
  slotModuleMaxRAM INTEGER
  slotModuleInstalledRAM INTEGER
  slotModuleFlashSize INTEGER
  slotModuleProductImageId INTEGER
  slotModuleBaseMacAddress MacAddress
  slotLastResetEPC Counter32
  slotLastResetCause Counter32
  slotLastResetVirtualAddress Counter32
  slotLastResetTimeStamp Counter32
  slotConfigAdd Boolean
  slotConfigExtClockSource INTEGER
  slotConfigTrafficShapingRate INTEGER

Defined Values

centillion 1.3.6.1.4.1.930
OBJECT IDENTIFIER    

cnProducts 1.3.6.1.4.1.930.1
OBJECT IDENTIFIER    

proprietary 1.3.6.1.4.1.930.2
OBJECT IDENTIFIER    

extensions 1.3.6.1.4.1.930.3
OBJECT IDENTIFIER    

cnTemporary 1.3.6.1.4.1.930.4
OBJECT IDENTIFIER    

cnSystem 1.3.6.1.4.1.930.2.1
OBJECT IDENTIFIER    

cnATM 1.3.6.1.4.1.930.2.2
OBJECT IDENTIFIER    

sysChassis 1.3.6.1.4.1.930.2.1.1
OBJECT IDENTIFIER    

sysConfig 1.3.6.1.4.1.930.2.1.2
OBJECT IDENTIFIER    

sysMonitor 1.3.6.1.4.1.930.2.1.3
OBJECT IDENTIFIER    

sysTrap 1.3.6.1.4.1.930.2.1.4
OBJECT IDENTIFIER    

sysEvtLogMgmt 1.3.6.1.4.1.930.2.1.5
OBJECT IDENTIFIER    

atmConfig 1.3.6.1.4.1.930.2.2.1
OBJECT IDENTIFIER    

atmMonitor 1.3.6.1.4.1.930.2.2.2
OBJECT IDENTIFIER    

atmLane 1.3.6.1.4.1.930.2.2.3
OBJECT IDENTIFIER    

atmSonet 1.3.6.1.4.1.930.2.2.4
OBJECT IDENTIFIER    

sysMcpRedundTrap 1.3.6.1.4.1.930.2.1.4.1
OBJECT IDENTIFIER    

cnPvcTraps 1.3.6.1.4.1.930.2.1.4.2
OBJECT IDENTIFIER    

cnCentillion100 1.3.6.1.4.1.930.1.1
OBJECT IDENTIFIER    

cnIBM8251 1.3.6.1.4.1.930.1.2
OBJECT IDENTIFIER    

cnBayStack301 1.3.6.1.4.1.930.1.3
OBJECT IDENTIFIER    

cn5000BH-MCP 1.3.6.1.4.1.930.1.4
OBJECT IDENTIFIER    

cnCentillion50N 1.3.6.1.4.1.930.1.5
OBJECT IDENTIFIER    

cnCentillion50T 1.3.6.1.4.1.930.1.6
OBJECT IDENTIFIER    

cn5005BH-MCP 1.3.6.1.4.1.930.1.7
OBJECT IDENTIFIER    

chassisType 1.3.6.1.4.1.930.2.1.1.1
The chassis type.
OBJECT-TYPE    
  SsChassisType  

chassisBkplType 1.3.6.1.4.1.930.2.1.1.2
The chassis backplane type.
OBJECT-TYPE    
  SsBackplaneType  

chassisPs1FailStatus 1.3.6.1.4.1.930.2.1.1.3
Power supply 1 failure indicator. A value of on (1) indicates a failure on power supply 1.
OBJECT-TYPE    
  FailIndicator  

chassisPs2FailStatus 1.3.6.1.4.1.930.2.1.1.4
Power supply 2 failure indicator. A value of on (1) indicates a failure on power supply 2.
OBJECT-TYPE    
  FailIndicator  

chassisFanFailStatus 1.3.6.1.4.1.930.2.1.1.5
System chassis fan failure indicator. A value of on (1) indicates a failure on one or both of the system fans.
OBJECT-TYPE    
  FailIndicator  

chassisSerialNumber 1.3.6.1.4.1.930.2.1.1.6
Chassis serial number.
OBJECT-TYPE    
  STRING Size(3)  

chassisPartNumber 1.3.6.1.4.1.930.2.1.1.7
Chassis part number.
OBJECT-TYPE    
  STRING Size(6)  

slotConfigTable 1.3.6.1.4.1.930.2.1.1.9
The chassis slot configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    SlotConfigEntry

slotConfigEntry 1.3.6.1.4.1.930.2.1.1.9.1
What type of module is in each slot of the chassis.
OBJECT-TYPE    
  SlotConfigEntry  

slotNumber 1.3.6.1.4.1.930.2.1.1.9.1.1
The chassis slot number. Valid entries are system dependent based on the chassis type.
OBJECT-TYPE    
  INTEGER  

slotModuleType 1.3.6.1.4.1.930.2.1.1.9.1.2
Module type.
OBJECT-TYPE    
  SsModuleType  

slotModuleHwVer 1.3.6.1.4.1.930.2.1.1.9.1.3
The hardware revision of the module.
OBJECT-TYPE    
  STRING Size(6)  

slotModuleSerialNumber 1.3.6.1.4.1.930.2.1.1.9.1.4
Module serial number. Format is 3 BCD digits.
OBJECT-TYPE    
  STRING Size(3)  

slotModuleSwVer 1.3.6.1.4.1.930.2.1.1.9.1.5
The software revision of the module.
OBJECT-TYPE    
  DisplayString  

slotModuleStatus 1.3.6.1.4.1.930.2.1.1.9.1.6
This indicates the operational status of the module.
OBJECT-TYPE    
  INTEGER ok(1), fail(2)  

slotModuleLeds 1.3.6.1.4.1.930.2.1.1.9.1.7
Status of the module LEDs. Each LED bank is encoded in four bits (nibble), one bit for each LED. The least significant bit of each nibble represents the bottom LED of each bank. The first octet in the string, as read from left to right represents the first LED banks.
OBJECT-TYPE    
  STRING  

slotModuleReset 1.3.6.1.4.1.930.2.1.1.9.1.8
This indicates the reset state of the module. Writing with the value reset (2) will reset the module.
OBJECT-TYPE    
  INTEGER noReset(1), reset(2)  

slotConfigDelete 1.3.6.1.4.1.930.2.1.1.9.1.9
Setting this object causes the configuration of the slot to be deleted. When read, this object has a value of false(2).
OBJECT-TYPE    
  Boolean  

slotConfigMediaType 1.3.6.1.4.1.930.2.1.1.9.1.10
The configured card media type. In the case of a card mismatch, the configured media type and the module type will not match.
OBJECT-TYPE    
  SsMediaType  

slotModuleMaxRAM 1.3.6.1.4.1.930.2.1.1.9.1.11
This indicates maximum RAM size in KB can be installed in this module.
OBJECT-TYPE    
  INTEGER  

slotModuleInstalledRAM 1.3.6.1.4.1.930.2.1.1.9.1.12
This indicates installed RAM in KB of this module.
OBJECT-TYPE    
  INTEGER  

slotModuleFlashSize 1.3.6.1.4.1.930.2.1.1.9.1.13
This indicates installed flash size in KB of this module.
OBJECT-TYPE    
  INTEGER  

slotModuleProductImageId 1.3.6.1.4.1.930.2.1.1.9.1.14
This indicates the product target image id of this module.
OBJECT-TYPE    
  INTEGER notApplicable(1), noAtmLanEmulation(2), minAtmLanEmulation(3), fullAtmLanEmulation(4), pnnifullAtmLanEmulation(5)  

slotModuleBaseMacAddress 1.3.6.1.4.1.930.2.1.1.9.1.15
This object returns the module base Mac address. A physical port's default Mac address can be computed based on this address by using following computation: Port(n)MacAddress = Moudle base Mac address + Port(n); where (n) is the 0-based port number.
OBJECT-TYPE    
  MacAddress  

slotLastResetEPC 1.3.6.1.4.1.930.2.1.1.9.1.16
The programe counter realated to the last reset.
OBJECT-TYPE    
  Counter32  

slotLastResetVirtualAddress 1.3.6.1.4.1.930.2.1.1.9.1.17
The bus address.
OBJECT-TYPE    
  Counter32  

slotLastResetCause 1.3.6.1.4.1.930.2.1.1.9.1.18
Register value related to the last reset
OBJECT-TYPE    
  Counter32  

slotLastResetTimeStamp 1.3.6.1.4.1.930.2.1.1.9.1.19
A integer value of the system clock since last reset.
OBJECT-TYPE    
  Counter32  

slotConfigAdd 1.3.6.1.4.1.930.2.1.1.9.1.20
Setting this object causes the configuration of the slot to be updated to match the module currently in the slot. When read, this object always returns false(2).
OBJECT-TYPE    
  Boolean  

slotConfigExtClockSource 1.3.6.1.4.1.930.2.1.1.9.1.21
This field indicates the external clock source. 0 = Local Oscillator, 1..N = ATM port id for external clock source. This object only applies to ATM MDA modules with SM, MM, or UTP media types.
OBJECT-TYPE    
  INTEGER  

slotConfigTrafficShapingRate 1.3.6.1.4.1.930.2.1.1.9.1.22
Configured traffic shaping rate in kilo bits per second on an ATM module. The actual rate may be different from the configured rate depending upon the physical interface of ports in the module.
OBJECT-TYPE    
  INTEGER