BLUECOAT-SG-USAGE-MIB

File: BLUECOAT-SG-USAGE-MIB.mib (5768 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC BLUECOAT-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 TEXTUAL-CONVENTION TimeStamp
TruthValue DisplayString blueCoatMgmt

Defined Types

Percent  
TEXTUAL-CONVENTION    
  current Integer32 0..100

UsageStatus  
TEXTUAL-CONVENTION    
  current INTEGER ok(1), high(2)

DeviceUsageEntry  
SEQUENCE    
  deviceUsageIndex INTEGER
  deviceUsageTrapEnabled TruthValue
  deviceUsageName DisplayString
  deviceUsagePercent Percent
  deviceUsageHigh Percent
  deviceUsageStatus UsageStatus
  deviceUsageTime TimeStamp

Defined Values

deviceUsageMIB 1.3.6.1.4.1.3417.2.4
The usage MIB is used to monitor resource usage of the device.
MODULE-IDENTITY    

deviceUsageMIBObjects 1.3.6.1.4.1.3417.2.4.1
OBJECT IDENTIFIER    

deviceUsageMIBNotifications 1.3.6.1.4.1.3417.2.4.2
OBJECT IDENTIFIER    

deviceUsageMIBNotificationsPrefix 1.3.6.1.4.1.3417.2.4.2.0
OBJECT IDENTIFIER    

deviceUsageTable 1.3.6.1.4.1.3417.2.4.1.1
This table lists the various resources that are available.
OBJECT-TYPE    
  SEQUENCE OF  
    DeviceUsageEntry

deviceUsageEntry 1.3.6.1.4.1.3417.2.4.1.1.1
A deviceUsage entry describes the present usage of a resource.
OBJECT-TYPE    
  DeviceUsageEntry  

deviceUsageIndex 1.3.6.1.4.1.3417.2.4.1.1.1.1
An arbitrary value which uniquely identifies a resource.
OBJECT-TYPE    
  Integer32 1..2147483647  

deviceUsageTrapEnabled 1.3.6.1.4.1.3417.2.4.1.1.1.2
This variable controls generation of deviceUsageTrap for this resource. When this variable is true(1), generation of deviceUsageTrap is enabled. When this variable is false(2), generation of deviceUsageTrap is disabled. The default start-up value is true(1).
OBJECT-TYPE    
  TruthValue  

deviceUsageName 1.3.6.1.4.1.3417.2.4.1.1.1.3
The textual name of the resource e.g. Disk.
OBJECT-TYPE    
  DisplayString  

deviceUsagePercent 1.3.6.1.4.1.3417.2.4.1.1.1.4
Percent of resource in use.
OBJECT-TYPE    
  Percent  

deviceUsageHigh 1.3.6.1.4.1.3417.2.4.1.1.1.5
Percent usage which a notification will be sent when the value is reached. For example, if deviceUsageHigh is set to 79 then notification will be send when the value changes from less than 79 to 79. The default is defined by the device for a particular resource.
OBJECT-TYPE    
  Percent  

deviceUsageStatus 1.3.6.1.4.1.3417.2.4.1.1.1.6
Comparison of deviceUsagePercent with deviceUsageHigh.
OBJECT-TYPE    
  UsageStatus  

deviceUsageTime 1.3.6.1.4.1.3417.2.4.1.1.1.7
Value of 'sysUpTime.0' at last resource reading.
OBJECT-TYPE    
  TimeStamp  

deviceUsageTrap 1.3.6.1.4.1.3417.2.4.2.0.1
A notification is sent when the deviceUsagePercent exceeds a threshold. This is no longer functional. Use health monitoring instead.
NOTIFICATION-TYPE