BIANCA-X8000-MIBSYS-MIB

File: BIANCA-X8000-MIBSYS-MIB.mib (10043 bytes)

Imported modules

RFC1155-SMI	RFC1158-MIB	RFC-1215
RFC-1212

Imported symbols

Counter	enterprises	DisplayString
TRAP-TYPE	OBJECT-TYPE

Defined Values

bintec		1.3.6.1.4.1.272
OBJECT IDENTIFIER

bibo		1.3.6.1.4.1.272.4
OBJECT IDENTIFIER

sys		1.3.6.1.4.1.272.4.17
OBJECT IDENTIFIER

x8		1.3.6.1.4.1.272.4.17.3
OBJECT IDENTIFIER

sysX8Config		1.3.6.1.4.1.272.4.17.3.1
OBJECT IDENTIFIER

sysX8Traps		1.3.6.1.4.1.272.4.17.3.2
OBJECT IDENTIFIER

sysX8ConfigPowerSupply1State		1.3.6.1.4.1.272.4.17.3.1.1
This variable shows the state of the power supply.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	missing(1), off(2), running(3), fail(4)

sysX8ConfigPowerSupply1Temp		1.3.6.1.4.1.272.4.17.3.1.2
This variable shows the actual power supply temperature in the unit Celsius.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..250

sysX8ConfigPowerSupply1TempAlarmThreshold		1.3.6.1.4.1.272.4.17.3.1.3
Power supply 1 temperature threshold.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..250

sysX8ConfigPowerSupply1TempAlarmTrap		1.3.6.1.4.1.272.4.17.3.1.4
If the power supply temperature raises above the threshold, a alarm trap is generated every 60 seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), critical(2)

sysX8ConfigPowerSupply2State		1.3.6.1.4.1.272.4.17.3.1.5
This variable show the the state of the power supply.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	missing(1), off(2), running(3), fail(4)

sysX8ConfigPowerSupply2Temp		1.3.6.1.4.1.272.4.17.3.1.6
This variable shows the actual power supply temperature in the unit Celsius.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..250

sysX8ConfigPowerSupply2TempAlarmThreshold		1.3.6.1.4.1.272.4.17.3.1.7
Power supply 2 temperature threshold.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..250

sysX8ConfigPowerSupply2TempAlarmTrap		1.3.6.1.4.1.272.4.17.3.1.8
If the power supply temperature raises above the threshold, a alarm trap is generated every 60 seconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), critical(2)

sysX8ConfigFanControl		1.3.6.1.4.1.272.4.17.3.1.9
This variable defines automatic fan control. In mode 'auto' the fans are automatically adjusted depending on the current temperature. In mode 'high' all fans remain at maximum speed.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	auto(1), high(2)

sysX8ConfigFanVersion		1.3.6.1.4.1.272.4.17.3.1.10
This variable shows the firmware version of the fan unit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

sysX8ConfigFan1		1.3.6.1.4.1.272.4.17.3.1.11
This variable shows the current turning speed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

sysX8ConfigFan2		1.3.6.1.4.1.272.4.17.3.1.12
This variable shows the current turning speed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

sysX8ConfigFan3		1.3.6.1.4.1.272.4.17.3.1.13
This variable shows the current turning speed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

sysX8ConfigFan4		1.3.6.1.4.1.272.4.17.3.1.14
This variable shows the current turning speed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

sysX8TrapPowerSupply1Missing		1
This trap signifies that the power supply 1 has been removed
TRAP-TYPE

sysX8TrapPowerSupply1PowerOff		2
This trap signifies that the power supply 1 has no power-good signal (no power input)
TRAP-TYPE

sysX8TrapPowerSupply1PowerFail		3
This trap signifies that the power supply 1 has been in the failure (bad DC output)
TRAP-TYPE

sysX8TrapPowerSupply1PowerGood		4
This trap signifies that the power supply 1 is running (supplying power)
TRAP-TYPE

sysX8TrapPowerSupply1TempCritical		5
This trap signifies that the power supply 1 temperature raises above the critical alarm-threshold
TRAP-TYPE

sysX8TrapPowerSupply1TempOk		6
A normal power supply 1 temperature has been restored.
TRAP-TYPE

sysX8TrapPowerSupply2Missing		7
This trap signifies that the power supply 2 has been removed
TRAP-TYPE

sysX8TrapPowerSupply2PowerOff		8
This trap signifies that the power supply 2 has no power-good signal (no power input)
TRAP-TYPE

sysX8TrapPowerSupply2PowerFail		9
This trap signifies that the power supply 2 has been in the failure (bad DC output)
TRAP-TYPE

sysX8TrapPowerSupply2PowerGood		10
This trap signifies that the power supply 2 is running (supplying power)
TRAP-TYPE

sysX8TrapPowerSupply2TempCritical		11
This trap signifies that the power supply 2 temperature raises above the critical alarm-threshold
TRAP-TYPE

sysX8TrapPowerSupply2TempOk		12
A normal power supply 2 temperature has been restored.
TRAP-TYPE

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor