BIANCA-BRICK-HDSL2SHDSL2-MIB

File: BIANCA-BRICK-HDSL2SHDSL2-MIB.mib (98960 bytes)

Imported modules

RFC1155-SMI	RFC1158-MIB	RFC-1215
RFC-1212

Imported symbols

Counter	enterprises	DisplayString
TRAP-TYPE	OBJECT-TYPE

Defined Types

Hdsl2ShdslInventoryEntry
SEQUENCE
	hdsl2ShdslInvIfIndex	INTEGER
	hdsl2ShdslInvIndex	INTEGER
	hdsl2ShdslInvVendorID	OCTET STRING
	hdsl2ShdslInvVendorModelNumber	OCTET STRING
	hdsl2ShdslInvVendorSerialNumber	OCTET STRING
	hdsl2ShdslInvVendorEOCSoftwareVersion	INTEGER
	hdsl2ShdslInvStandardVersion	INTEGER
	hdsl2ShdslInvVendorListNumber	OCTET STRING
	hdsl2ShdslInvVendorIssueNumber	OCTET STRING
	hdsl2ShdslInvVendorSoftwareVersion	OCTET STRING
	hdsl2ShdslInvEquipmentCode	OCTET STRING
	hdsl2ShdslInvVendorOther	OCTET STRING
	hdsl2ShdslInvTransmissionModeCapability	INTEGER

Hdsl2ShdslEndpointConfEntry
SEQUENCE
	hdsl2ShdslEndpointConfIfIndex	INTEGER
	hdsl2ShdslEndpointConfSide	INTEGER
	hdsl2ShdslEndpointConfWireInterface	INTEGER
	hdsl2ShdslEndpointConfMinLineRate	INTEGER
	hdsl2ShdslEndpointConfMaxLineRate	INTEGER
	hdsl2ShdslEndpointConfTransmissionMode	INTEGER
	hdsl2ShdslEndpointConfWorstCaseTargetMarginDown	INTEGER
	hdsl2ShdslEndpointConfWorstCaseTargetMarginUp	INTEGER
	hdsl2ShdslEndpointConfGroupId	INTEGER
	hdsl2ShdslEndpointConfLineProbeEnable	INTEGER
	hdsl2ShdslEndpointConfLicenseUsage	INTEGER
	hdsl2ShdslEndpointConfPamMode	INTEGER
	hdsl2ShdslEndpointConfTotalMinLineRate	INTEGER
	hdsl2ShdslEndpointConfMinWirePairs	INTEGER
	hdsl2ShdslEndpointConfCapListStyle	INTEGER

Hdsl2ShdslEndpointCurrEntry
SEQUENCE
	hdsl2ShdslEndpointCurrIfIndex	INTEGER
	hdsl2ShdslEndpointCurrReceivedBlks	INTEGER
	hdsl2ShdslEndpointCurrTransmittedBlks	INTEGER
	hdsl2ShdslEndpointCurrCorrectedBlks	INTEGER
	hdsl2ShdslEndpointCurrUncorrectBlks	INTEGER
	hdsl2ShdslEndpointCurrAtn	INTEGER
	hdsl2ShdslEndpointCurrSnrMgn	INTEGER
	hdsl2ShdslEndpointCurrStatus	INTEGER
	hdsl2ShdslEndpointES	Counter
	hdsl2ShdslEndpointSES	Counter
	hdsl2ShdslEndpointCRCanomalies	Counter
	hdsl2ShdslEndpointLOSWS	Counter
	hdsl2ShdslEndpointUAS	Counter
	hdsl2ShdslEndpointCurr15MinReceivedBlks	INTEGER
	hdsl2ShdslEndpointCurr15MinTransmittedBlks	INTEGER
	hdsl2ShdslEndpointCurr15MinCorrectedBlks	INTEGER
	hdsl2ShdslEndpointCurr15MinUncorrectBlks	INTEGER
	hdsl2ShdslEndpointCurr15MinTimeElapsed	INTEGER
	hdsl2ShdslEndpointCurr15MinES	INTEGER
	hdsl2ShdslEndpointCurr15MinSES	INTEGER
	hdsl2ShdslEndpointCurr15MinCRCanomalies	INTEGER
	hdsl2ShdslEndpointCurr15MinLOSWS	INTEGER
	hdsl2ShdslEndpointCurr15MinUAS	INTEGER
	hdsl2ShdslEndpointCurr1DayReceivedBlks	INTEGER
	hdsl2ShdslEndpointCurr1DayTransmittedBlks	INTEGER
	hdsl2ShdslEndpointCurr1DayCorrectedBlks	INTEGER
	hdsl2ShdslEndpointCurr1DayUncorrectBlks	INTEGER
	hdsl2ShdslEndpointCurr1DayTimeElapsed	INTEGER
	hdsl2ShdslEndpointCurr1DayES	INTEGER
	hdsl2ShdslEndpointCurr1DaySES	INTEGER
	hdsl2ShdslEndpointCurr1DayCRCanomalies	INTEGER
	hdsl2ShdslEndpointCurr1DayLOSWS	INTEGER
	hdsl2ShdslEndpointCurr1DayUAS	INTEGER

Hdsl2ShdslSpanConfProfileEntry
SEQUENCE
	hdsl2ShdslSpanConfProfileName	DisplayString
	hdsl2ShdslSpanConfWireInterface	INTEGER
	hdsl2ShdslSpanConfMinLineRate	INTEGER
	hdsl2ShdslSpanConfMaxLineRate	INTEGER
	hdsl2ShdslSpanConfTransmissionMode	INTEGER
	hdsl2ShdslSpanConfWorstCaseTargetMarginDown	INTEGER
	hdsl2ShdslSpanConfWorstCaseTargetMarginUp	INTEGER

Defined Values

bintec		1.3.6.1.4.1.272
OBJECT IDENTIFIER

bibo		1.3.6.1.4.1.272.4
OBJECT IDENTIFIER

hdsl2shdsl		1.3.6.1.4.1.272.4.35
OBJECT IDENTIFIER

hdsl2ShdslLineMib		1.3.6.1.4.1.272.4.35.1
OBJECT IDENTIFIER

hdsl2ShdslMibObjects		1.3.6.1.4.1.272.4.35.1.1
OBJECT IDENTIFIER

hdsl2ShdslInventoryTable		1.3.6.1.4.1.272.4.35.1.1.3
This table supports retrieval of unit inventory information available via the EOC from units in a HDSL2/SHDSL line. Entries in this table are dynamically created during the line discovery process. The life cycle for these entries is as follows: - xtu discovers a device, either a far-end xtu or an xru - an inventory table entry is created for the device - the line goes down for whatever reason - inventory table entries for unreachable devices are destroyed. As these entries are created/destroyed dynamically, they are NOT persistent.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hdsl2ShdslInventoryEntry

hdsl2ShdslInventoryEntry		1.3.6.1.4.1.272.4.35.1.1.3.1
An entry in the hdsl2ShdslInventoryTable. Each entry represents inventory information for a single unit in a HDSL2/SHDSL line. It is indexed by the ifIndex of the HDSL2/SHDSL line.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Hdsl2ShdslInventoryEntry

hdsl2ShdslInvIfIndex		1.3.6.1.4.1.272.4.35.1.1.3.1.1
This object specifies the associated interface index of this HDSL2/SHDSL line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslInvIndex		1.3.6.1.4.1.272.4.35.1.1.3.1.2
Each entry in this table corresponds to a physical element in a HDSL2/SHDSL Span. It is based on the EOC unit addressing scheme with reference to the xtuC.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	xtuC(1), xtuR(2), xru1(3), xru2(4), xru3(5), xru4(6), xru5(7), xru6(8), xru7(9), xru8(10)

hdsl2ShdslInvVendorID		1.3.6.1.4.1.272.4.35.1.1.3.1.3
Vendor ID as reported in an Inventory Response message.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

hdsl2ShdslInvVendorModelNumber		1.3.6.1.4.1.272.4.35.1.1.3.1.4
Vendor model number as reported in an Inventory Response message.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(12)

hdsl2ShdslInvVendorSerialNumber		1.3.6.1.4.1.272.4.35.1.1.3.1.5
Vendor serial number as reported in an Inventory Response message.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(12)

hdsl2ShdslInvVendorEOCSoftwareVersion		1.3.6.1.4.1.272.4.35.1.1.3.1.6
Vendor EOC version as reported in a Discovery Response message.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslInvStandardVersion		1.3.6.1.4.1.272.4.35.1.1.3.1.7
Version of the HDSL2/SHDSL standard implemented, as reported in an Inventory Response message.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslInvVendorListNumber		1.3.6.1.4.1.272.4.35.1.1.3.1.8
Vendor list number as reported in an Inventory Response message.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(3)

hdsl2ShdslInvVendorIssueNumber		1.3.6.1.4.1.272.4.35.1.1.3.1.9
Vendor issue number as reported in an Inventory Response message.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(2)

hdsl2ShdslInvVendorSoftwareVersion		1.3.6.1.4.1.272.4.35.1.1.3.1.10
Vendor software version as reported in an Inventory Response message.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(6)

hdsl2ShdslInvEquipmentCode		1.3.6.1.4.1.272.4.35.1.1.3.1.11
Equipment code conforming to ANSI T1.213, Coded Identification of Equipment Entities.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(10)

hdsl2ShdslInvVendorOther		1.3.6.1.4.1.272.4.35.1.1.3.1.12
Other vendor information as reported in an Inventory Response message.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(12)

hdsl2ShdslInvTransmissionModeCapability		1.3.6.1.4.1.272.4.35.1.1.3.1.13
Contains the transmission mode capability of the SHDSL unit: region1 - ITU-T G.991.2 Annex A region2 - ITU-T G.991.2 Annex B
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	region1(1), region2(2)

hdsl2ShdslEndpointConfTable		1.3.6.1.4.1.272.4.35.1.1.4
This table supports configuration parameters for segment endpoints in a HDSL2/SHDSL line. As this table is indexed by ifIndex, it MUST be maintained in a persistent manner. Entries in this table are created by the system only.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hdsl2ShdslEndpointConfEntry

hdsl2ShdslEndpointConfEntry		1.3.6.1.4.1.272.4.35.1.1.4.1
An entry in the hdsl2ShdslEndpointConfTable. Each entry represents a single segment endpoint in a HDSL2/SHDSL line. It is indexed by the ifIndex of the HDSL2/SHDSL line.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Hdsl2ShdslEndpointConfEntry

hdsl2ShdslEndpointConfIfIndex		1.3.6.1.4.1.272.4.35.1.1.4.1.1
This object specifies the associated interface index of this HDSL2/SHDSL line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointConfSide		1.3.6.1.4.1.272.4.35.1.1.4.1.2
The side of the unit associated with this segment endpoint - Network/Customer side - as per the Hdsl2ShdslUnitSide textual convention.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	networkSide(1), customerSide(2)

hdsl2ShdslEndpointConfWireInterface		1.3.6.1.4.1.272.4.35.1.1.4.1.5
This object configures the bonding mode of the SHDSL Line. twoWire(1) : no bonding is used fourWire(2) : four-wire mode fourWireStandard(3) : four-wire mode, disable globespan enhanced mode fourWireIMA(4) : 2 wire pairs bonded with IMA sixWire(5) : 3 wire pairs in m-pair mode sixWireIMA(6) : 3 wire pairs bonded with IMA eightWire(7) : 4 wire pairs in m-pair mode eightWireIMA(8) : 4 wire pairs bonded with IMA not-used(9) : wire pair inactive groupMember(10) : wire pair belongs to a bonding group twoWireEFM(11) : 2 wire EFM mode fourWireEFM(12) : 2 wire pairs in EFM mode with PAF bonding sixWireEFM(13) : 3 wire pairs in EFM mode with PAF bonding eightWireEFM(14) : 4 wire pairs in EFM mode with PAF bonding
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	twoWire(1), fourWire(2), fourWireStandard(3), fourWireIMA(4), sixWire(5), sixWireIMA(6), eightWire(7), eightWireIMA(8), not-used(9), groupMember(10), twoWireEFM(11), fourWireEFM(12), sixWireEFM(13), eightWireEFM(14)

hdsl2ShdslEndpointConfMinLineRate		1.3.6.1.4.1.272.4.35.1.1.4.1.6
This object configures the minimum transmission rate for the associated SHDSL Line in bits-per-second (bps). If the minimum line rate equals the maximum line rate (hdsl2ShdslSpanMaxLineRate), the line rate is considered 'fixed'. If the minimum line rate is less than the maximum line rate, the line rate is considered 'rate-adaptive'.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..22784000

hdsl2ShdslEndpointConfMaxLineRate		1.3.6.1.4.1.272.4.35.1.1.4.1.7
This object configures the maximum transmission rate for the associated SHDSL Line in bits-per-second (bps). If the minimum line rate equals the maximum line rate (hdsl2ShdslSpanMaxLineRate), the line rate is considered 'fixed'. If the minimum line rate is less than the maximum line rate, the line rate is considered 'rate-adaptive'.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..22784000

hdsl2ShdslEndpointConfTransmissionMode		1.3.6.1.4.1.272.4.35.1.1.4.1.8
This object specifies the regional setting for the SHDSL line: region1 - ITU-T G.991.2 Annex A region2 - ITU-T G.991.2 Annex B
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	region1(1), region2(2), region1or2(3)

hdsl2ShdslEndpointConfWorstCaseTargetMarginDown		1.3.6.1.4.1.272.4.35.1.1.4.1.11
This object specifies the downstream worst case target SNR margin for a SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

hdsl2ShdslEndpointConfWorstCaseTargetMarginUp		1.3.6.1.4.1.272.4.35.1.1.4.1.13
This object specifies the upstream worst case target SNR margin for a SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	-10..21

hdsl2ShdslEndpointConfGroupId		1.3.6.1.4.1.272.4.35.1.1.4.1.14
This object defines which wire-pairs belong to the same M-pair group or IMA group. Members of the same group have the same entry.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

hdsl2ShdslEndpointConfLineProbeEnable		1.3.6.1.4.1.272.4.35.1.1.4.1.15
This object specifies the configuration of the PMMS behavior: auto - Line Probe is enabled if hdsl2ShdslEndpointConfMinLineRate < hdsl2ShdslEndpointConfMaxLineRate. disable - Line Probe is disabled. enable - Line Probe is enabled. enable_std - Line Probe is enabled and standard compliant behaviour is enforced.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	auto(1), disable(2), enable(3), enable-std(4)

hdsl2ShdslEndpointConfLicenseUsage		1.3.6.1.4.1.272.4.35.1.1.4.1.16
Shows which license type is currently used for this SHDSL interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), missing(2), shdsl(3)

hdsl2ShdslEndpointConfPamMode		1.3.6.1.4.1.272.4.35.1.1.4.1.17
This object specifies which modulation modes are allowed for this wire pair. 16 - 16-TCPAM, used for Annex A,B and F,G. 32 - 32-TCPAM, used for Annex F,G only. 4, 8, 64, 128 - non standard proprietary modes. On CPE site more than one mode can be allowed by adding the values. On CO site only the highest mode is used if several values are added.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	4..252

hdsl2ShdslEndpointConfTotalMinLineRate		1.3.6.1.4.1.272.4.35.1.1.4.1.18
This object configures the minimum transmission rate in bits-per-second (bps) for the associated SHDSL bundle. The associated interfaces go up only when the sum of the data rates of the associated wire pairs in state Showtime reaches or exceeds the specified value. This variable has no effect with single pair modes.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..50000000

hdsl2ShdslEndpointConfMinWirePairs		1.3.6.1.4.1.272.4.35.1.1.4.1.19
This object configures the minimum number of wire pairs for the associated SHDSL bundle. The associated interfaces go up only when at least the specified number of wire pairs is connected and in Showtime. This variable has no effect with single pair modes.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..4

hdsl2ShdslEndpointConfCapListStyle		1.3.6.1.4.1.272.4.35.1.1.4.1.20
This object specifies the data format of the capability list, that is exchanged during the G.994.1 handshake: auto - automatic detection of the used capability list style. old - only ATM modes till 2312 kbps can be negotiated. new - all modes can be negotiated.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	auto(1), old(2), new(3)

hdsl2ShdslEndpointCurrTable		1.3.6.1.4.1.272.4.35.1.1.5
This table contains current status and performance information for segment endpoints in HDSL2/SHDSL Lines. As with other tables in this MIB indexed by ifIndex, entries in this table MUST be maintained in a persistent manner. Entries in this table are created by the system only.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hdsl2ShdslEndpointCurrEntry

hdsl2ShdslEndpointCurrEntry		1.3.6.1.4.1.272.4.35.1.1.5.1
An entry in the hdsl2ShdslEndpointCurrTable. Each entry contains status and performance information relating to a single segment endpoint. It is indexed by the ifIndex of the HDSL2/SHDSL line.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Hdsl2ShdslEndpointCurrEntry

hdsl2ShdslEndpointCurrIfIndex		1.3.6.1.4.1.272.4.35.1.1.5.1.1
This object specifies the associated interface index of this HDSL2/SHDSL line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurrReceivedBlks		1.3.6.1.4.1.272.4.35.1.1.5.1.2
Count of all encoded blocks received on this channel since agent reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurrTransmittedBlks		1.3.6.1.4.1.272.4.35.1.1.5.1.3
Count of all encoded blocks transmitted on this channel since agent reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurrCorrectedBlks		1.3.6.1.4.1.272.4.35.1.1.5.1.4
Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurrUncorrectBlks		1.3.6.1.4.1.272.4.35.1.1.5.1.5
Count of all blocks received with uncorrectable errors since agent reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurrAtn		1.3.6.1.4.1.272.4.35.1.1.5.1.6
The current loop attenuation for this endpoint as reported in a Network or Customer Side Performance Status message.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	-127..128

hdsl2ShdslEndpointCurrSnrMgn		1.3.6.1.4.1.272.4.35.1.1.5.1.7
The current SNR margin for this endpoint as reported in a Status Response/SNR message.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	-127..128

hdsl2ShdslEndpointCurrStatus		1.3.6.1.4.1.272.4.35.1.1.5.1.8
Contains the current state of the endpoint. This is a bitmap of possible conditions. The various bit positions are: noDefect There no defects on the line. powerBackoff Indicates enhanced Power Backoff. deviceFault Indicates a vendor-dependent diagnostic or self-test fault has been detected. dcContinuityFault Indicates vendor-dependent conditions that interfere with span powering such as short and open circuits. snrMarginAlarm Indicates that the SNR margin has dropped below the alarm threshold. loopAttenuationAlarm Indicates that the loop attenuation exceeds the alarm threshold. (not supported by GlobeSpan !) loswFailureAlarm Indicates a forward LOSW alarm. configInitFailure Endpoint failure during initialization due to paired endpoint not able to support requested configuration. protocolInitFailure Endpoint failure during initialization due to incompatible protocol used by the paired endpoint. noNeighborPresent Endpoint failure during initialization due to no activation sequence detected from paired endpoint. loopbackActive A loopback is currently active at this Segment Endpoint. This is intended to supplement ifOperStatus. Note that there is a 1-1 relationship between the status bits defined in this object and the notification thresholds defined elsewhere in this MIB.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noDefect(1), powerBackoff(2), deviceFault(3), dcContinuityFault(4), snrMarginAlarm(5), loswFailureAlarm(7), configInitFailure(8), protocolInitFailure(9), noNeighborPresent(10), loopbackActive(11)

hdsl2ShdslEndpointES		1.3.6.1.4.1.272.4.35.1.1.5.1.9
Count of Errored Seconds (ES) on this endpoint since the xU was last restarted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

hdsl2ShdslEndpointSES		1.3.6.1.4.1.272.4.35.1.1.5.1.10
Count of Severely Errored Seconds (SES) on this endpoint since the xU was last restarted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

hdsl2ShdslEndpointCRCanomalies		1.3.6.1.4.1.272.4.35.1.1.5.1.11
Count of CRC anomalies on this endpoint since the xU was last restarted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

hdsl2ShdslEndpointLOSWS		1.3.6.1.4.1.272.4.35.1.1.5.1.12
Count of Loss of Sync Word (LOSW) Seconds on this endpoint since the xU was last restarted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

hdsl2ShdslEndpointUAS		1.3.6.1.4.1.272.4.35.1.1.5.1.13
Count of Unavailable Seconds (UAS) on this endpoint since the xU was last restarted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

hdsl2ShdslEndpointCurr15MinReceivedBlks		1.3.6.1.4.1.272.4.35.1.1.5.1.14
Count of all encoded blocks received on this channel within the mandatory 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurr15MinTransmittedBlks		1.3.6.1.4.1.272.4.35.1.1.5.1.15
Count of all encoded blocks transmitted on this channel within the mandatory 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurr15MinCorrectedBlks		1.3.6.1.4.1.272.4.35.1.1.5.1.16
Count of all blocks received with errors that were corrected on this channel within the mandatory 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurr15MinUncorrectBlks		1.3.6.1.4.1.272.4.35.1.1.5.1.17
Count of all blocks received with uncorrectable errors on this channel within the mandatory 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurr15MinTimeElapsed		1.3.6.1.4.1.272.4.35.1.1.5.1.18
Total elapsed seconds in the current 15-minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..86399

hdsl2ShdslEndpointCurr15MinES		1.3.6.1.4.1.272.4.35.1.1.5.1.19
Count of Errored Seconds (ES) in the current 15-minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurr15MinSES		1.3.6.1.4.1.272.4.35.1.1.5.1.20
Count of Severely Errored Seconds (SES) in the current 15-minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurr15MinCRCanomalies		1.3.6.1.4.1.272.4.35.1.1.5.1.21
Count of CRC anomalies in the current 15-minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurr15MinLOSWS		1.3.6.1.4.1.272.4.35.1.1.5.1.22
Count of Loss of Sync Word (LOSW) Seconds in the current 15-minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurr15MinUAS		1.3.6.1.4.1.272.4.35.1.1.5.1.23
Count of Unavailable Seconds (UAS) in the current 15-minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurr1DayReceivedBlks		1.3.6.1.4.1.272.4.35.1.1.5.1.24
Count of all encoded blocks received on this channel during the mandatory day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurr1DayTransmittedBlks		1.3.6.1.4.1.272.4.35.1.1.5.1.25
Count of all encoded blocks transmitted on this channel during the mandatory day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurr1DayCorrectedBlks		1.3.6.1.4.1.272.4.35.1.1.5.1.26
Count of all blocks received with errors that were corrected on this channel during the mandatory day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurr1DayUncorrectBlks		1.3.6.1.4.1.272.4.35.1.1.5.1.27
Count of all blocks received with uncorrectable errors on this channel during the mandatory day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurr1DayTimeElapsed		1.3.6.1.4.1.272.4.35.1.1.5.1.28
Number of seconds that have elapsed since the beginning of the current 1-day interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..86399

hdsl2ShdslEndpointCurr1DayES		1.3.6.1.4.1.272.4.35.1.1.5.1.29
Count of Errored Seconds (ES) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurr1DaySES		1.3.6.1.4.1.272.4.35.1.1.5.1.30
Count of Severely Errored Seconds (SES) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurr1DayCRCanomalies		1.3.6.1.4.1.272.4.35.1.1.5.1.31
Count of CRC anomalies during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurr1DayLOSWS		1.3.6.1.4.1.272.4.35.1.1.5.1.32
Count of Loss of Sync Word (LOSW) Seconds during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslEndpointCurr1DayUAS		1.3.6.1.4.1.272.4.35.1.1.5.1.33
Count of Unavailable Seconds (UAS) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

hdsl2ShdslSpanConfProfileTable		1.3.6.1.4.1.272.4.35.1.1.10
This table supports definitions of span configuration profiles for SHDSL lines. HDSL2 does not support these configuration options. This table MUST be maintained in a persistent manner. Entries in this table are created by the system only.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Hdsl2ShdslSpanConfProfileEntry

hdsl2ShdslSpanConfProfileEntry		1.3.6.1.4.1.272.4.35.1.1.10.1
Each entry corresponds to a single span configuration profile. Each profile contains a set of span configuration parameters. The configuration parameters in a profile are applied to those lines referencing that profile (see the hdsl2ShdslSpanConfProfile object). Profiles may be created/deleted only by the system.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Hdsl2ShdslSpanConfProfileEntry

hdsl2ShdslSpanConfProfileName		1.3.6.1.4.1.272.4.35.1.1.10.1.1
This object is the unique index associated with this profile. Entries in this table are referenced via the object hdsl2ShdslSpanConfProfile in Hdsl2ShdslSpanConfEntry.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

hdsl2ShdslSpanConfWireInterface		1.3.6.1.4.1.272.4.35.1.1.10.1.2
This object configures the bonding mode of the SHDSL Line. twoWire(1) : no bonding is used fourWire(2) : four-wire mode fourWireStandard(3) : four-wire mode, disable globespan enhanced mode fourWireIMA(4) : 2 wire pairs bonded with IMA sixWire(5) : 3 wire pairs in m-pair mode sixWireIMA(6) : 3 wire pairs bonded with IMA eightWire(7) : 4 wire pairs in m-pair mode eightWireIMA(8) : 4 wire pairs bonded with IMA not-used(9) : wire pair inactive groupMember(10) : wire pair belongs to a bonding group twoWireEFM(11) : 2 wire EFM mode fourWireEFM(12) : 2 wire pairs in EFM mode with PAF bonding sixWireEFM(13) : 3 wire pairs in EFM mode with PAF bonding eightWireEFM(14) : 4 wire pairs in EFM mode with PAF bonding
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	twoWire(1), fourWire(2), fourWireStandard(3), fourWireIMA(4), sixWire(5), sixWireIMA(6), eightWire(7), eightWireIMA(8), not-used(9), groupMember(10), twoWireEFM(11), fourWireEFM(12), sixWireEFM(13), eightWireEFM(14)

hdsl2ShdslSpanConfMinLineRate		1.3.6.1.4.1.272.4.35.1.1.10.1.3
This object configures the minimum transmission rate for the associated SHDSL Line in bits-per-second (bps). If the minimum line rate equals the maximum line rate (hdsl2ShdslSpanMaxLineRate), the line rate is considered 'fixed'. If the minimum line rate is less than the maximum line rate, the line rate is considered 'rate-adaptive'.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..22784000

hdsl2ShdslSpanConfMaxLineRate		1.3.6.1.4.1.272.4.35.1.1.10.1.4
This object configures the maximum transmission rate for the associated SHDSL Line in bits-per-second (bps). If the minimum line rate equals the maximum line rate (hdsl2ShdslSpanMaxLineRate), the line rate is considered 'fixed'. If the minimum line rate is less than the maximum line rate, the line rate is considered 'rate-adaptive'.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..22784000

hdsl2ShdslSpanConfTransmissionMode		1.3.6.1.4.1.272.4.35.1.1.10.1.6
This object specifies the regional setting for the SHDSL line: region1 - ITU-T G.991.2 Annex A region2 - ITU-T G.991.2 Annex B
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	region1(1), region2(2), region1or2(3)

hdsl2ShdslSpanConfWorstCaseTargetMarginDown		1.3.6.1.4.1.272.4.35.1.1.10.1.10
This object specifies the downstream worst case target SNR margin for a SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

hdsl2ShdslSpanConfWorstCaseTargetMarginUp		1.3.6.1.4.1.272.4.35.1.1.10.1.12
This object specifies the upstream worst case target SNR margin for a SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	-10..21