BIANCA-BRICK-ATM2-MIB

File: BIANCA-BRICK-ATM2-MIB.mib (51718 bytes)

Imported modules

RFC1155-SMI	RFC1158-MIB	RFC1213-MIB
RFC-1212

Imported symbols

IpAddress	Counter	Gauge
TimeTicks	enterprises	DisplayString
PhysAddress	OBJECT-TYPE

Defined Types

AtmIfEntry
SEQUENCE
	atmIfIndex	INTEGER
	atmIfType	INTEGER
	atmIfDescr	DisplayString
	atmIfAdminStatus	INTEGER
	atmIfOperStatus	INTEGER
	atmIfLastChange	TimeTicks
	atmIfInPkts	Counter
	atmIfOutPkts	Counter
	atmIfRxSpeed	Gauge
	atmIfTxSpeed	Gauge
	atmIfInOctets	Counter
	atmIfInDiscards	Counter
	atmIfInErrors	Counter
	atmIfOutOctets	Counter
	atmIfOutDiscards	Counter
	atmIfOutErrors	Counter
	atmIfMaxTxRate	INTEGER
	atmIfOperMode	INTEGER

AtmVpcEntry
SEQUENCE
	atmVpcPortIndex	INTEGER
	atmVpcVpi	INTEGER
	atmVpcOperStatus	INTEGER

AtmVccEntry
SEQUENCE
	atmVccPortIndex	INTEGER
	atmVccVpi	INTEGER
	atmVccVci	INTEGER
	atmVccOperStatus	INTEGER

AtmOamEntry
SEQUENCE
	atmOamAtmIfIndex	INTEGER
	atmOamVpi	INTEGER
	atmOamVci	INTEGER
	atmOamFlowLevel	INTEGER
	atmOamLoopbackEnd2End	INTEGER
	atmOamLoopbackSegment	INTEGER
	atmOamLoopbackEnd2EndInterval	INTEGER
	atmOamLoopbackSegmentInterval	INTEGER
	atmOamLoopbackEnd2EndMaxPending	INTEGER
	atmOamLoopbackSegmentMaxPending	INTEGER
	atmOamCCEnd2EndActivation	INTEGER
	atmOamCCSegmentActivation	INTEGER
	atmOamCCEnd2EndDirection	INTEGER
	atmOamCCSegmentDirection	INTEGER

AtmOamStatEntry
SEQUENCE
	atmOamStatAtmIfIndex	INTEGER
	atmOamStatVpi	INTEGER
	atmOamStatVci	INTEGER
	atmOamStatFlowType	INTEGER
	atmOamStatLoopbackTxCells	Counter
	atmOamStatLoopbackRxCells	Counter
	atmOamStatLoopbackPending	Counter
	atmOamStatLoopbackCorr	INTEGER
	atmOamStatAisState	INTEGER
	atmOamStatAisTxCells	Counter
	atmOamStatAisRxCells	Counter
	atmOamStatTotalAisTxCells	Counter
	atmOamStatTotalAisRxCells	Counter
	atmOamStatRdiState	INTEGER
	atmOamStatRdiTxCells	Counter
	atmOamStatRdiRxCells	Counter
	atmOamStatTotalRdiTxCells	Counter
	atmOamStatTotalRdiRxCells	Counter
	atmOamStatCCActivatorState	INTEGER
	atmOamStatCCActivatorDirection	INTEGER
	atmOamStatCCActivatorCorr	INTEGER
	atmOamStatCCResponderState	INTEGER
	atmOamStatCCResponderDirection	INTEGER
	atmOamStatCCResponderCorr	INTEGER
	atmOamStatCCTxCells	Counter
	atmOamStatCCRxCells	Counter

EthoaPvcEntry
SEQUENCE
	ethoaPvcIfIndex	INTEGER
	ethoaPvcDescr	DisplayString
	ethoaPvcAtmIfIndex	INTEGER
	ethoaPvcVpi	INTEGER
	ethoaPvcVci	INTEGER
	ethoaPvcEncapsulation	INTEGER
	ethoaPvcPhysAddress	PhysAddress

RpoaPvcEntry
SEQUENCE
	rpoaPvcIfIndex	INTEGER
	rpoaPvcDescr	DisplayString
	rpoaPvcAtmIfIndex	INTEGER
	rpoaPvcVpi	INTEGER
	rpoaPvcVci	INTEGER
	rpoaPvcEncapsulation	INTEGER

PppoaPvcEntry
SEQUENCE
	pppoaPvcIfIndex	INTEGER
	pppoaPvcDescr	DisplayString
	pppoaPvcAtmIfIndex	INTEGER
	pppoaPvcVpi	INTEGER
	pppoaPvcVci	INTEGER
	pppoaPvcEncapsulation	INTEGER
	pppoaPvcClientType	INTEGER

AtmQosVccEntry
SEQUENCE
	atmQosVccAtmIfIndex	INTEGER
	atmQosVccVpi	INTEGER
	atmQosVccVci	INTEGER
	atmQosVccService	INTEGER
	atmQosVccOutPcr	INTEGER
	atmQosVccOutScr	INTEGER
	atmQosVccOutMbs	INTEGER
	atmQosVccOutMcr	INTEGER

AtmAturPerfDataEntry
SEQUENCE
	atmAturPerfIfIndex	INTEGER
	atmAturPerfIdleCells	INTEGER
	atmAturPerfDataCells	INTEGER
	atmAturPerfLcds	INTEGER
	atmAturPerfHecs	INTEGER
	atmAturPerfCurr15MinTimeElapsed	INTEGER
	atmAturPerfCurr15MinIdleCells	INTEGER
	atmAturPerfCurr15MinDataCells	INTEGER
	atmAturPerfCurr15MinLcds	INTEGER
	atmAturPerfCurr15MinHecs	INTEGER
	atmAturPerfCurr1DayTimeElapsed	INTEGER
	atmAturPerfCurr1DayIdleCells	INTEGER
	atmAturPerfCurr1DayDataCells	INTEGER
	atmAturPerfCurr1DayLcds	INTEGER
	atmAturPerfCurr1DayHecs	INTEGER
	atmAturPerfPrev1DayIdleCells	INTEGER
	atmAturPerfPrev1DayDataCells	INTEGER
	atmAturPerfPrev1DayLcds	INTEGER
	atmAturPerfPrev1DayHecs	INTEGER

AtmAtucPerfDataEntry
SEQUENCE
	atmAtucPerfIfIndex	INTEGER
	atmAtucPerfIdleCells	INTEGER
	atmAtucPerfDataCells	INTEGER
	atmAtucPerfLcds	INTEGER
	atmAtucPerfHecs	INTEGER
	atmAtucPerfCurr15MinTimeElapsed	INTEGER
	atmAtucPerfCurr15MinIdleCells	INTEGER
	atmAtucPerfCurr15MinDataCells	INTEGER
	atmAtucPerfCurr15MinLcds	INTEGER
	atmAtucPerfCurr15MinHecs	INTEGER
	atmAtucPerfCurr1DayTimeElapsed	INTEGER
	atmAtucPerfCurr1DayIdleCells	INTEGER
	atmAtucPerfCurr1DayDataCells	INTEGER
	atmAtucPerfCurr1DayLcds	INTEGER
	atmAtucPerfCurr1DayHecs	INTEGER
	atmAtucPerfPrev1DayIdleCells	INTEGER
	atmAtucPerfPrev1DayDataCells	INTEGER
	atmAtucPerfPrev1DayLcds	INTEGER
	atmAtucPerfPrev1DayHecs	INTEGER

Defined Values

bintec		1.3.6.1.4.1.272
OBJECT IDENTIFIER

bibo		1.3.6.1.4.1.272.4
OBJECT IDENTIFIER

atm		1.3.6.1.4.1.272.4.16
OBJECT IDENTIFIER

atmIfTable		1.3.6.1.4.1.272.4.16.10
The atmIfTable displays all available ATM capable interfaces.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AtmIfEntry

atmIfEntry		1.3.6.1.4.1.272.4.16.10.1
An interface entry containing objects at the subnetwork layer and below for a particular interface.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AtmIfEntry

atmIfIndex		1.3.6.1.4.1.272.4.16.10.1.1
The interface index of the associated ATM hardware.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmIfType		1.3.6.1.4.1.272.4.16.10.1.2
This object contains an interface type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), adsl(2), shdsl(3), vdsl(4)

atmIfDescr		1.3.6.1.4.1.272.4.16.10.1.3
Short description for this object.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

atmIfAdminStatus		1.3.6.1.4.1.272.4.16.10.1.4
This object contains the desired state of the ATM interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	up(1), down(2)

atmIfOperStatus		1.3.6.1.4.1.272.4.16.10.1.5
The current operational state of the ATM interface.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

atmIfLastChange		1.3.6.1.4.1.272.4.16.10.1.6
The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	TimeTicks

atmIfMaxTxRate		1.3.6.1.4.1.272.4.16.10.1.7
This object enables traffic shaping on the related ATM interface. If set to zero (0) there is no shaping active. Otherwise this variable defines the maximum amount of bits per second to be transmitted. Note that the maximum transmit rate is also determined by the capabilities of the ATM hardware.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmIfOperMode		1.3.6.1.4.1.272.4.16.10.1.8
The current operational mode of the ATM interface. The value atm(1) means ATM is used on the line. The value efm(2) means ATM is used only internally and Ethernet with HDLC framing is used on the line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	atm(1), efm(2)

atmIfInPkts		1.3.6.1.4.1.272.4.16.10.1.22
The number of reassembled received packets.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmIfOutPkts		1.3.6.1.4.1.272.4.16.10.1.23
This number of transmitted packets.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmIfRxSpeed		1.3.6.1.4.1.272.4.16.10.1.24
This object contains the receive interface speed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmIfTxSpeed		1.3.6.1.4.1.272.4.16.10.1.25
This object contains the transmit interface speed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmIfInOctets		1.3.6.1.4.1.272.4.16.10.1.26
The total number of octets received on the interface, including framing characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmIfInDiscards		1.3.6.1.4.1.272.4.16.10.1.27
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmIfInErrors		1.3.6.1.4.1.272.4.16.10.1.28
The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmIfOutOctets		1.3.6.1.4.1.272.4.16.10.1.29
The total number of octets transmitted out of the interface, including framing characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmIfOutDiscards		1.3.6.1.4.1.272.4.16.10.1.30
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmIfOutErrors		1.3.6.1.4.1.272.4.16.10.1.31
The number of outbound packets that could not be transmitted because of errors.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmVpcTable		1.3.6.1.4.1.272.4.16.11
A table of status and parameter information on the virtual path connections which cross this UNI. There is one entry in this table for each permanent virtual path connection. This is the lite version of ATM-FORUM-MIB DEFINITIONS
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AtmVpcEntry

atmVpcEntry		1.3.6.1.4.1.272.4.16.11.1
An entry in the table, containing information about a particular virtual path connection.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AtmVpcEntry

atmVpcPortIndex		1.3.6.1.4.1.272.4.16.11.1.1
The interface index of the associated ATM hardware.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmVpcVpi		1.3.6.1.4.1.272.4.16.11.1.2
The VPI value of this Virtual Path Connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

atmVpcOperStatus		1.3.6.1.4.1.272.4.16.11.1.3
The present actual operational status of the VPC. A value of end2endUp(2) or end2endDown(3) would be used if the end-to-end status is known. If only local status information is available, a value of localUpEnd2endUnknown(4) or localDown(5) would be used.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), end2endUp(2), end2endDown(3), localUpEnd2endUnknown(4), localDown(5)

atmVccTable		1.3.6.1.4.1.272.4.16.12
A table of status and parameter information on the virtual channel connections which are visible at this UNI. There is one entry in this table for each permanent virtual channel connection, including reserved VCCs that are supported; e.g., signalling, OAM flows, and ILMI, but not unassigned cells. This is the lite version of ATM-FORUM-MIB DEFINITIONS
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AtmVccEntry

atmVccEntry		1.3.6.1.4.1.272.4.16.12.1
An entry in the table, containing information about a particular virtual channel connection.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AtmVccEntry

atmVccPortIndex		1.3.6.1.4.1.272.4.16.12.1.1
The interface index of the associated ATM hardware.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmVccVpi		1.3.6.1.4.1.272.4.16.12.1.2
The VPI value of this Virtual Channel Connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

atmVccVci		1.3.6.1.4.1.272.4.16.12.1.3
The VCI value of this Virtual Channel Connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

atmVccOperStatus		1.3.6.1.4.1.272.4.16.12.1.4
The present actual operational status of the VCC. A value of end2endUp(2) or end2endUp(3) is used if the end-to-end status is known. If only local status is known a value of localUpEnd2endUnknown(4) or localDown(5) is used.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), end2endUp(2), end2endDown(3), localUpEnd2endUnknown(4), localDown(5)

atmOamTable		1.3.6.1.4.1.272.4.16.13
This tables contains all OAM configuration parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AtmOamEntry

atmOamEntry		1.3.6.1.4.1.272.4.16.13.1
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AtmOamEntry

atmOamAtmIfIndex		1.3.6.1.4.1.272.4.16.13.1.1
The interface index of the associated ATM hardware.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmOamVpi		1.3.6.1.4.1.272.4.16.13.1.2
The VPI value of this Virtual Path/Channel Connection.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

atmOamVci		1.3.6.1.4.1.272.4.16.13.1.3
The VCI value of this Virtual Channel Connection.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

atmOamFlowLevel		1.3.6.1.4.1.272.4.16.13.1.4
The OAM hierarchical flow levels : VC (F5) or VP (F4).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	f5(1), f4(2), delete(10)

atmOamLoopbackEnd2End		1.3.6.1.4.1.272.4.16.13.1.5
Indicates wether OAM loopback is enabled onto the end-to-end connection.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

atmOamLoopbackSegment		1.3.6.1.4.1.272.4.16.13.1.6
Indicates wether active OAM loopback is enabled onto the segment connection.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), enabled(2)

atmOamLoopbackEnd2EndInterval		1.3.6.1.4.1.272.4.16.13.1.7
OAM loopback transmit interval (in seconds) for end-to-end context.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..999

atmOamLoopbackSegmentInterval		1.3.6.1.4.1.272.4.16.13.1.8
OAM loopback transmit interval (in seconds) for segment context.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..999

atmOamLoopbackEnd2EndMaxPending		1.3.6.1.4.1.272.4.16.13.1.9
Specifies the maximum number of outstanding OAM loopback responses after which the associated F4/F5 instance will be set into the end-to-end operational down status.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..999

atmOamLoopbackSegmentMaxPending		1.3.6.1.4.1.272.4.16.13.1.10
Specifies the maximum number of outstanding OAM loopback responses after which the associated F4/F5 instance will be set into the segment operational down status.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..999

atmOamCCEnd2EndActivation		1.3.6.1.4.1.272.4.16.13.1.11
Determines wether OAM continuity check activation request will be activated and/or accepted for the associated end-to-end connection. If set to passive(1) or both(3) CC activation requests will be confirmed. If set to active(2) or both CC will be requested. If set to no-negotiation(4) - depending on the settings in atmOamCCEnd2EndDirection - CC cells will be send and/or expected periodically without any previous CC activation negotiation. If set to none(5) neither CC activation will be requested/confirmed nor any CC cells will be generated/expected.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	passive(1), active(2), both(3), no-negotiation(4), none(5)

atmOamCCSegmentActivation		1.3.6.1.4.1.272.4.16.13.1.12
Determines wether OAM continuity check activation request will be activated and/or accepted for the associated segment connection. If set to passive(1) or both(3) CC activation requests will be confirmed. If set to active(2) or both CC will be requested. If set to no-negotiation(4) - depending on the settings in atmOamCCSegmentDirection - CC cells will be send and/or expected periodically without any previous CC activation negotiation. If set to none(5) neither CC activation will be requested/confirmed nor any CC cells will be generated/expected.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	passive(1), active(2), both(3), no-negotiation(4), none(5)

atmOamCCEnd2EndDirection		1.3.6.1.4.1.272.4.16.13.1.13
Determines OAM continuity check direction (for end-to-end). If set to sink(1) CC cells will be received only, if set to source(2) CC cells will be generated periodically, if set to both(3) CC cells will be received from the source as well as send to the sink.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	sink(1), source(2), both(3), none(4)

atmOamCCSegmentDirection		1.3.6.1.4.1.272.4.16.13.1.14
Determines OAM continuity check direction (for segment). If set to sink(1) CC cells will be received only, if set to source(2) CC cells will be generated periodically, if set to both(3) CC cells will be received from the source as well as send to the sink.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	sink(1), source(2), both(3), none(4)

atmOamStatTable		1.3.6.1.4.1.272.4.16.14
This tables displays all used VCs.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AtmOamStatEntry

atmOamStatEntry		1.3.6.1.4.1.272.4.16.14.1
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AtmOamStatEntry

atmOamStatAtmIfIndex		1.3.6.1.4.1.272.4.16.14.1.1
The interface index of the associated ATM hardware.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmOamStatVpi		1.3.6.1.4.1.272.4.16.14.1.2
The VPI value of this Virtual Path Connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

atmOamStatVci		1.3.6.1.4.1.272.4.16.14.1.3
The VCI value of this Virtual Channel Connection.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..65535

atmOamStatFlowType		1.3.6.1.4.1.272.4.16.14.1.4
The OAM hierarchical flow levels: see ITU I.610
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	f5-segment(1), f5-end2end(2), f4-segment(3), f4-end2end(4)

atmOamStatLoopbackTxCells		1.3.6.1.4.1.272.4.16.14.1.6
The number of OAM loopback cells that have been sent to the target in this sequence.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOamStatLoopbackRxCells		1.3.6.1.4.1.272.4.16.14.1.7
The number of OAM loopback cells that have been received from the target in this sequence.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOamStatLoopbackPending		1.3.6.1.4.1.272.4.16.14.1.8
The number of currently outstanding OAM loopback responses.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOamStatLoopbackCorr		1.3.6.1.4.1.272.4.16.14.1.9
The correlation of the last sent loopback message.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmOamStatAisState		1.3.6.1.4.1.272.4.16.14.1.10
The AIS state is set to on(2) after receiving an AIS cell or detection of LOC (Loss of Continuity). The Ais state is set to off(1) either when receiving user cells (same VCC context) or via timeout.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), on(2)

atmOamStatAisTxCells		1.3.6.1.4.1.272.4.16.14.1.11
The number of OAM alarm indication signal (AIS) cells that have been transmitted since last change of AisState.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOamStatAisRxCells		1.3.6.1.4.1.272.4.16.14.1.12
The number of OAM alarm indication signal (AIS) cells that have been received since last change of AisState.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOamStatTotalAisTxCells		1.3.6.1.4.1.272.4.16.14.1.13
The total number of OAM alarm indication signal (AIS) cells that have been transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOamStatTotalAisRxCells		1.3.6.1.4.1.272.4.16.14.1.14
The total number of OAM alarm indication signal (AIS) cells that have been received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOamStatRdiState		1.3.6.1.4.1.272.4.16.14.1.15
The RDI state is set to on(2) after receiving a RDI cell. The RDI state is to off(1) via timeout.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), on(2)

atmOamStatRdiTxCells		1.3.6.1.4.1.272.4.16.14.1.16
The number of OAM remote defect indication (RDI) cells that have been transmitted since last change of RdiState.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOamStatRdiRxCells		1.3.6.1.4.1.272.4.16.14.1.17
The number of OAM remote defect indication (RDI) cells that have been received since last change of RdiState.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOamStatTotalRdiTxCells		1.3.6.1.4.1.272.4.16.14.1.18
The totoal number of OAM remote defect indication (RDI) cells that have been transmitted.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmOamStatTotalRdiRxCells		1.3.6.1.4.1.272.4.16.14.1.19
The total number of OAM remote defect indication (RDI) cells that have been received.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOamStatCCActivatorState		1.3.6.1.4.1.272.4.16.14.1.20
The status of the initiated CC negotiation, inactive(1) is the initial status, wait-act-con(2) is set after sending an CC activation request, active(3) is reached after receiving the CC activation confirmation whereas wait-deact-con(4) is used to indicate awaiting the CC deactivation confirmation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	inactive(1), wait-act-con(2), active(3), wait-deact-con(4)

atmOamStatCCActivatorDirection		1.3.6.1.4.1.272.4.16.14.1.21
The direction of action indicated by a received CC activation confirmation, source(1) correlates with 'A-B', sink(2) with 'B-A' and both(3) with 'A-B' and 'B-A'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	sink(1), source(2), both(3), not-applicable(4)

atmOamStatCCActivatorCorr		1.3.6.1.4.1.272.4.16.14.1.22
The correlation of the last CC activation message sent to the responder.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmOamStatCCResponderState		1.3.6.1.4.1.272.4.16.14.1.23
The status of the passive CC negotiation, inactive(1) is the initial status, active(3) is reached after receiving an CC activation request whereas wait-deact-con(4) is used to indicate awaiting the CC deactivation confirmation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	inactive(1), active(3), wait-deact-con(4)

atmOamStatCCResponderDirection		1.3.6.1.4.1.272.4.16.14.1.24
The direction of action indicated by a received CC activation request, source(1) correlates with 'B-A', sink(2) with 'A-B' and both(3) with 'A-B' and 'B-A'.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	source(1), sink(2), both(3), not-applicable(4)

atmOamStatCCResponderCorr		1.3.6.1.4.1.272.4.16.14.1.25
The correlation of the received CC activation message.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmOamStatCCTxCells		1.3.6.1.4.1.272.4.16.14.1.26
The number of OAM continuity check cells that have been sent to the target in this sequence.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmOamStatCCRxCells		1.3.6.1.4.1.272.4.16.14.1.27
The number of OAM continuity check cells that have been received from the target in this sequence.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

ethoaPvcTable		1.3.6.1.4.1.272.4.16.15
The ethoaPvcTable displays all virtual ethernets defined for a VCI/VPI on a specified hardware.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EthoaPvcEntry

ethoaPvcEntry		1.3.6.1.4.1.272.4.16.15.1
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	EthoaPvcEntry

ethoaPvcIfIndex		1.3.6.1.4.1.272.4.16.15.1.1
This object contains an interface index and assigns the row to an entry in ifTable. When creating new entries in the table, the value of this object shall be set to 0. The next free ifIndex value is than allocated and assigned to the object. At the same time a new interface is created in the IfTable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

ethoaPvcDescr		1.3.6.1.4.1.272.4.16.15.1.2
Short description of the configured PVC
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

ethoaPvcAtmIfIndex		1.3.6.1.4.1.272.4.16.15.1.3
The Index to the ATM hardware.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

ethoaPvcVpi		1.3.6.1.4.1.272.4.16.15.1.4
The VPI value of this Virtual Path Connection.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

ethoaPvcVci		1.3.6.1.4.1.272.4.16.15.1.5
The VCI value of this Virtual Channel Connection.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

ethoaPvcEncapsulation		1.3.6.1.4.1.272.4.16.15.1.6
This values decides whether frames are send without FCS(1), with FCS(2) or wether VC multiplexing is used.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	bridged-no-fcs(1), bridged-fcs(2), vc-multiplexed(3), delete(10)

ethoaPvcPhysAddress		1.3.6.1.4.1.272.4.16.15.1.7
The MAC-Address used for the virtual interface.
Status: mandatory	Access: read-write
OBJECT-TYPE
	PhysAddress

rpoaPvcTable		1.3.6.1.4.1.272.4.16.16
This table configures Vpi/Vci for raw protocols (IP, IPX, etc.)
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RpoaPvcEntry

rpoaPvcEntry		1.3.6.1.4.1.272.4.16.16.1
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	RpoaPvcEntry

rpoaPvcIfIndex		1.3.6.1.4.1.272.4.16.16.1.1
This object contains an interface index and assigns the row to an entry in ifTable. When creating new entries in the table, the value of this object shall be set to 0. The next free ifIndex value is than allocated and assigned to the object. At the same time a new interface is created in the IfTable.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

rpoaPvcDescr		1.3.6.1.4.1.272.4.16.16.1.2
Short description of the configured PVC
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

rpoaPvcAtmIfIndex		1.3.6.1.4.1.272.4.16.16.1.3
The Index to the ATM hardware.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

rpoaPvcVpi		1.3.6.1.4.1.272.4.16.16.1.4
The VPI value of this Virtual Path Connection.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

rpoaPvcVci		1.3.6.1.4.1.272.4.16.16.1.5
The VCI value of this Virtual Channel Connection.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

rpoaPvcEncapsulation		1.3.6.1.4.1.272.4.16.16.1.6
This values decides whether frames are send codes with LLC 0xAA 0xAA (non-ISO), LLC 0xFE 0xFE (ISO) or wether VC multiplexing is used.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	non-iso(1), iso(2), vc-multiplexed(3), delete(10)

pppoaPvcTable		1.3.6.1.4.1.272.4.16.17
This table configures Vpi/Vci for PPP oaver AAL5 (PPPoA) permanent and on-demand sessions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		PppoaPvcEntry

pppoaPvcEntry		1.3.6.1.4.1.272.4.16.17.1
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	PppoaPvcEntry

pppoaPvcIfIndex		1.3.6.1.4.1.272.4.16.17.1.1
This object contains an interface index and refers to an entry in ifTable. When creating new entries in the table, the next free ifIndex value is than allocated and assigned to the object. At the same time a new interface is created in the IfTable with that very index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

pppoaPvcDescr		1.3.6.1.4.1.272.4.16.17.1.2
Short description of the configured PVC
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString

pppoaPvcAtmIfIndex		1.3.6.1.4.1.272.4.16.17.1.3
The Index to the ATM hardware.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

pppoaPvcVpi		1.3.6.1.4.1.272.4.16.17.1.4
The VPI value of this Virtual Path Connection.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

pppoaPvcVci		1.3.6.1.4.1.272.4.16.17.1.5
The VCI value of this Virtual Channel Connection.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

pppoaPvcEncapsulation		1.3.6.1.4.1.272.4.16.17.1.6
This value decides whether VC multiplexing or LLC encapsulation is used.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	vc-multiplexed(1), llc(2), delete(10)

pppoaPvcClientType		1.3.6.1.4.1.272.4.16.17.1.7
This variable defines whether the PPP over AAL5 session will be established permanent(1) or initiated on-demand(2).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	permanent(1), on-demand(2)

atmQosVccTable		1.3.6.1.4.1.272.4.16.19
This table provides QoS information for each active ATM VC on the related ATM interface
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AtmQosVccEntry

atmQosVccEntry		1.3.6.1.4.1.272.4.16.19.1
An entry in the table, containing ATM QoS parameters about a particular virtual connection.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AtmQosVccEntry

atmQosVccAtmIfIndex		1.3.6.1.4.1.272.4.16.19.1.1
The interface index of the associated ATM hardware.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmQosVccVpi		1.3.6.1.4.1.272.4.16.19.1.2
The VPI value of this Virtual Channel Connection.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

atmQosVccVci		1.3.6.1.4.1.272.4.16.19.1.3
The VCI value of this Virtual Channel Connection.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

atmQosVccService		1.3.6.1.4.1.272.4.16.19.1.4
The ATM service category of this virtual circuit connection: cbr vbr vbr2 vbr3 VBR1 + Best Effort vbr-rt real-time vbr2-rt real-time vbr3-rt real-time ubr Best Effort ubr2 Best Effort abr delete
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	cbr(1), vbr(2), vbr3(4), ubr(8), delete(20)

atmQosVccOutPcr		1.3.6.1.4.1.272.4.16.19.1.5
Output Peak Cell Rate (PCR) in bps.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmQosVccOutScr		1.3.6.1.4.1.272.4.16.19.1.6
Output Sustained Cell Rate (SCR) in bps.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmQosVccOutMbs		1.3.6.1.4.1.272.4.16.19.1.7
Output Maximum Burst Size (MBS) in Bytes, only for atmQosVccService vbr-rt(2) and vbr-nrt(3) (ATM service service category VBR).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmQosVccOutMcr		1.3.6.1.4.1.272.4.16.19.1.8
Output Minimum Cell Rate (MCR) in bps for connection with vbr-nrt(3).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

atmAturPerfDataTable		1.3.6.1.4.1.272.4.16.20
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AtmAturPerfDataEntry

atmAturPerfDataEntry		1.3.6.1.4.1.272.4.16.20.1
An entry in atmAturPerfDataTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AtmAturPerfDataEntry

atmAturPerfIfIndex		1.3.6.1.4.1.272.4.16.20.1.1
Specifies the ATM interface index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAturPerfIdleCells		1.3.6.1.4.1.272.4.16.20.1.2
The number of ATM idle cells.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAturPerfDataCells		1.3.6.1.4.1.272.4.16.20.1.3
The number of ATM data cells.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAturPerfLcds		1.3.6.1.4.1.272.4.16.20.1.4
Count of the number of Loss of Cell Delineation failures since agent reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAturPerfHecs		1.3.6.1.4.1.272.4.16.20.1.5
Count of the number of Header Error Check failures since agent reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAturPerfCurr15MinTimeElapsed		1.3.6.1.4.1.272.4.16.20.1.11
Total elapsed seconds in this interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..899

atmAturPerfCurr15MinIdleCells		1.3.6.1.4.1.272.4.16.20.1.12
The number of ATM idle cells in the mandatory 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAturPerfCurr15MinDataCells		1.3.6.1.4.1.272.4.16.20.1.13
The number of ATM data cells in the mandatory 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAturPerfCurr15MinLcds		1.3.6.1.4.1.272.4.16.20.1.14
Count of seconds in the mandatory 15 minute interval when there was Loss of Cell Delineation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAturPerfCurr15MinHecs		1.3.6.1.4.1.272.4.16.20.1.15
Count of seconds in the mandatory 15 minute interval when there was Header Error Check failures.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAturPerfCurr1DayTimeElapsed		1.3.6.1.4.1.272.4.16.20.1.18
Number of seconds that have elapsed since the beginning of the mandatory 1-day interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..86399

atmAturPerfCurr1DayIdleCells		1.3.6.1.4.1.272.4.16.20.1.19
The number of ATM idle cells during the mandatory day as measured by atmAturPerfCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAturPerfCurr1DayDataCells		1.3.6.1.4.1.272.4.16.20.1.20
The number of ATM data cells during the mandatory day as measured by atmAturPerfCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAturPerfCurr1DayLcds		1.3.6.1.4.1.272.4.16.20.1.21
Count of the number of seconds when there was Loss of Cell Delineation during the mandatory day as measured by atmAturPerfCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAturPerfCurr1DayHecs		1.3.6.1.4.1.272.4.16.20.1.22
Count of the number of seconds when there was Header Error Check failures during the mandatory day as measured by atmAturPerfCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAturPerfPrev1DayIdleCells		1.3.6.1.4.1.272.4.16.20.1.26
The number of ATM idle cells within the most recent previous 1-day period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAturPerfPrev1DayDataCells		1.3.6.1.4.1.272.4.16.20.1.27
The number of ATM data cells within the most recent previous 1-day period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAturPerfPrev1DayLcds		1.3.6.1.4.1.272.4.16.20.1.28
Count of seconds in the interval when there was Loss of Cell Delineation within the most recent previous 1-day period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAturPerfPrev1DayHecs		1.3.6.1.4.1.272.4.16.20.1.29
Count of seconds in the interval when there was Header Error Check within the most recent previous 1-day period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAtucPerfDataTable		1.3.6.1.4.1.272.4.16.21
Tok_String
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AtmAtucPerfDataEntry

atmAtucPerfDataEntry		1.3.6.1.4.1.272.4.16.21.1
An entry in atmAtucPerfDataTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AtmAtucPerfDataEntry

atmAtucPerfIfIndex		1.3.6.1.4.1.272.4.16.21.1.1
Specifies the ATM interface index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAtucPerfIdleCells		1.3.6.1.4.1.272.4.16.21.1.2
The number of ATM idle cells.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAtucPerfDataCells		1.3.6.1.4.1.272.4.16.21.1.3
The number of ATM data cells.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAtucPerfLcds		1.3.6.1.4.1.272.4.16.21.1.4
Count of the number of Loss of Cell Delineation failures since agent reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAtucPerfHecs		1.3.6.1.4.1.272.4.16.21.1.5
Count of the number of Header Error Check failures since agent reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAtucPerfCurr15MinTimeElapsed		1.3.6.1.4.1.272.4.16.21.1.11
Total elapsed seconds in this interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..899

atmAtucPerfCurr15MinIdleCells		1.3.6.1.4.1.272.4.16.21.1.12
The number of ATM idle cells in the mandatory 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAtucPerfCurr15MinDataCells		1.3.6.1.4.1.272.4.16.21.1.13
The number of ATM data cells in the mandatory 15 minute interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAtucPerfCurr15MinLcds		1.3.6.1.4.1.272.4.16.21.1.14
Count of seconds in the mandatory 15 minute interval when there was Loss of Cell Delineation.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAtucPerfCurr15MinHecs		1.3.6.1.4.1.272.4.16.21.1.15
Count of seconds in the mandatory 15 minute interval when there was Header Error Check failures.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAtucPerfCurr1DayTimeElapsed		1.3.6.1.4.1.272.4.16.21.1.18
Number of seconds that have elapsed since the beginning of the mandatory 1-day interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..86399

atmAtucPerfCurr1DayIdleCells		1.3.6.1.4.1.272.4.16.21.1.19
The number of ATM idle cells during the mandatory day as measured by atmAtucPerfCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAtucPerfCurr1DayDataCells		1.3.6.1.4.1.272.4.16.21.1.20
The number of ATM data cells during the mandatory day as measured by atmAtucPerfCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAtucPerfCurr1DayLcds		1.3.6.1.4.1.272.4.16.21.1.21
Count of the number of seconds when there was Loss of Cell Delineation during the mandatory day as measured by atmAtucPerfCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAtucPerfCurr1DayHecs		1.3.6.1.4.1.272.4.16.21.1.22
Count of the number of seconds when there was Header Error Check failures during the mandatory day as measured by atmAtucPerfCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAtucPerfPrev1DayIdleCells		1.3.6.1.4.1.272.4.16.21.1.26
The number of ATM idle cells within the most recent previous 1-day period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAtucPerfPrev1DayDataCells		1.3.6.1.4.1.272.4.16.21.1.27
The number of ATM data cells within the most recent previous 1-day period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAtucPerfPrev1DayLcds		1.3.6.1.4.1.272.4.16.21.1.28
Count of seconds in the interval when there was Loss of Cell Delineation within the most recent previous 1-day period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmAtucPerfPrev1DayHecs		1.3.6.1.4.1.272.4.16.21.1.29
Count of seconds in the interval when there was Header Error Check within the most recent previous 1-day period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER