AWAMP-MIB
File:
AWAMP-MIB.mib (35550 bytes)
Imported modules
Imported symbols
Defined Values
awamp |
1.3.6.1.4.1.12028.4 |
The MIB module for AirWave entities .
iso(1).org(3).dod(6).internet(1).private(4).
enterprises(1).airwave(12028).awamp(4) |
MODULE-IDENTITY |
|
|
|
airwave |
1.3.6.1.4.1.12028 |
OBJECT IDENTIFIER |
|
|
|
awampEvent |
1.3.6.1.4.1.12028.4.15 |
OBJECT IDENTIFIER |
|
|
|
awampAPEthMAC |
1.3.6.1.4.1.12028.4.103 |
IEEE Unique Identifier |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
awampAPIP |
1.3.6.1.4.1.12028.4.104 |
IP Address of the AP (Eth0) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
awampHPOVMAC1 |
1.3.6.1.4.1.12028.4.111 |
First Radio MAC on AP |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
awampHPOVIP1 |
1.3.6.1.4.1.12028.4.112 |
First Radio IP AP |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
awampHPOVMAC2 |
1.3.6.1.4.1.12028.4.113 |
Second Radio MAC on AP |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
awampHPOVIP2 |
1.3.6.1.4.1.12028.4.114 |
Second Radio IP AP |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
awampEventID |
1.3.6.1.4.1.12028.4.15.1.101 |
Random number AMP assigns to the event. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
awampEventAPIPOld |
1.3.6.1.4.1.12028.4.15.1.104 |
Old IP of the AP when AMP changes and
sends trap to HPOV. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
awampEventRogueIsWired |
1.3.6.1.4.1.12028.4.15.1.113 |
Detected Rogue AP was discovered on the wired network. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
tooManyDevAssocAMP |
1.3.6.1.4.1.12028.4.15.0.1 |
This trap is sent when too many devices are
simultaneously associated with AMP for a period of time. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tooManyDevAssocGroup |
1.3.6.1.4.1.12028.4.15.0.2 |
This trap is sent when too many devices are
simultaneously associated with a Group for a period of time. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
tooManyDevAssocAp |
1.3.6.1.4.1.12028.4.15.0.3 |
This trap is sent when too many devices are associated
simultaneously associated with an AP for a period of time. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
toomuchBWAMP |
1.3.6.1.4.1.12028.4.15.0.4 |
This trap is sent when there is too much BW being
used on the WLAN for a period of time. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
toomuchBWGroup |
1.3.6.1.4.1.12028.4.15.0.5 |
This trap is sent when there is too much BW being
used by a Group for a period of time. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
toomuchBWAP |
1.3.6.1.4.1.12028.4.15.0.6 |
This trap is sent when there is too much BW being
used on an AP for a period of time. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
toomuchBWClient |
1.3.6.1.4.1.12028.4.15.0.7 |
This trap is sent when there is too much BW being
used by a Client for a period of time. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
toomanyRoamsClient |
1.3.6.1.4.1.12028.4.15.0.8 |
This trap is sent when Client roams too frequently
for a period of time. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
poorSignalAP |
1.3.6.1.4.1.12028.4.15.0.9 |
This trap is sent when an AP has poor Signal
quality for a period of time. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
nonAMPAPChange |
1.3.6.1.4.1.12028.4.15.0.10 |
This trap is sent when an AP Changes configuration
without the AMP's knowledge |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
unauthenticatedClient |
1.3.6.1.4.1.12028.4.15.0.11 |
This trap is sent when Client is associated with
WLAN for a period of time without authenticating. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rogueAPDetected |
1.3.6.1.4.1.12028.4.15.0.12 |
This trap is sent when the AMP classifies a
Rogue AP. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
downAP |
1.3.6.1.4.1.12028.4.15.0.13 |
This trap is sent when the AP is down
(for instance, a missed SNMP Ping or SNMP Get). |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
discoveredAP |
1.3.6.1.4.1.12028.4.15.0.14 |
This trap is sent when AP is discovered by AMP.
Note that this only applies to AP discovery,
not authorization. (A Config trap is sent when
the AP is authorized. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
upAP |
1.3.6.1.4.1.12028.4.15.0.15 |
This trap is sent when AP is detected as UP after being
marked DOWN by the AMP. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
downRadio |
1.3.6.1.4.1.12028.4.15.0.16 |
This trap is sent when the radio of an AP is not operating. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
clientAssociate |
1.3.6.1.4.1.12028.4.15.0.17 |
This trap is sent when a watched client mac address
associates to an AP. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
authIssueClient |
1.3.6.1.4.1.12028.4.15.0.18 |
This trap is sent when a client experiences too many
authentication failures. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
authIssueAP |
1.3.6.1.4.1.12028.4.15.0.19 |
This trap is sent when an AP experiences too many
authentication failures. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
authIssueAMP |
1.3.6.1.4.1.12028.4.15.0.20 |
This trap is sent when AMP detects too many
authentication failures. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
idsEventAP |
1.3.6.1.4.1.12028.4.15.0.21 |
This trap is sent when AMP receives too many IDS
events from an AP. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rfidTagNotHeard |
1.3.6.1.4.1.12028.4.15.0.22 |
This trap is sent when an RFID tag is not heard for
a certain period of time. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
dot11Counters |
1.3.6.1.4.1.12028.4.15.0.23 |
This trap is sent when a Dot11 counter trigger fires. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
qosCounters |
1.3.6.1.4.1.12028.4.15.0.24 |
This trap is sent when a QOS counter trigger fires. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
deviceResources |
1.3.6.1.4.1.12028.4.15.0.25 |
This trap is sent when a Device Resources trigger fires. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
diskUsage |
1.3.6.1.4.1.12028.4.15.0.26 |
This trap is sent when a Disk Usage trigger fires. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
managedAmpDown |
1.3.6.1.4.1.12028.4.15.0.27 |
This trap is sent when a Managed AMP Down trigger fires. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
watchedAmpDown |
1.3.6.1.4.1.12028.4.15.0.28 |
This trap is sent when a Watched AMP Down trigger fires. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
interfaceBandwidth |
1.3.6.1.4.1.12028.4.15.0.29 |
This trap is sent when an Interface Bandwidth trigger fires. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
radioUtilization |
1.3.6.1.4.1.12028.4.15.0.30 |
This trap is sent when a Radio Utilization trigger fires. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
deviceEvent |
1.3.6.1.4.1.12028.4.15.0.31 |
This trap is sent when a Device Event trigger fires. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
rogueAPDetectedDetail |
1.3.6.1.4.1.12028.4.15.0.32 |
This trap is sent when the AMP classifies a
Rogue AP. It includes more details: SSID, Manufacturer,
Wired (boolean), Wireless (boolean), Classifying Rule Name,
Last Discovering Agent, and AP Folder Name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
ipv4LinkLocalAddresses |
1.3.6.1.4.1.12028.4.15.0.33 |
This trap is sent when a IPv4 Link-Local Addresses trigger fires. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
vpnUserConnect |
1.3.6.1.4.1.12028.4.15.0.34 |
This trap is sent when a new VPN user
connects to a controller. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
clientOnRogueAP |
1.3.6.1.4.1.12028.4.15.0.35 |
This trap is sent when a new client is discovered
on Rogue AP. It includes more details: Client MAC,
Rogue SSID and Rogue Device Name. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
vpnUserAssociate |
1.3.6.1.4.1.12028.4.15.0.36 |
This trap is sent when a watched VPN username
associates to a controller. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
toomuchBWVPNUser |
1.3.6.1.4.1.12028.4.15.0.37 |
This trap is sent when a new VPN user
connects to a controller. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
toomuchGoodputClient |
1.3.6.1.4.1.12028.4.15.0.38 |
This trap is sent when there is too much Goodput being
used by a Client for a period of time. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
speedClient |
1.3.6.1.4.1.12028.4.15.0.39 |
This trap is sent when speed of a Client is
below (or above) a threshold for a period of time. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
noisefloorRadio |
1.3.6.1.4.1.12028.4.15.0.40 |
This trap is sent when noise floor of AP is
below (or above) a threshold for a period of time. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
genericTrap |
1.3.6.1.4.1.12028.4.15.0.50 |
This trap will catch things not defined. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
internalAMLUnknown |
1.3.6.1.4.1.12028.4.15.0.51 |
This is an internal trap designed for AML
running on the NNM. It allows the AML to
dynamically accept severity codes from the AMP.
Because HP OpenView statically defines these in
trapd.conf per trap, we are creating an internal
for each severity level to work around issue.
Represents Blue and level 1 |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
internalAMLNormal |
1.3.6.1.4.1.12028.4.15.0.52 |
This is an internal trap designed for AML
running on the NNM. It allows the AML to
dynamically accept severity codes from the AMP.
Because HP OpenView statically defines these in
trapd.conf per trap, we are creating an internal
for each severity level to work around issue.
Represents Green and level 2 |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
internalAMLMinor |
1.3.6.1.4.1.12028.4.15.0.53 |
This is an internal trap designed for AML
running on the NNM. It allows the AML to
dynamically accept severity codes from the AMP.
Because HP OpenView statically defines these in
trapd.conf per trap, we are creating an internal
for each severity level to work around issue.
Represents yellow and level 3 |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
internalAMLCritcal |
1.3.6.1.4.1.12028.4.15.0.54 |
This is an internal trap designed for AML
running on the NNM. It allows the AML to
dynamically accept severity codes from the AMP.
Because HP OpenView statically defines these in
trapd.conf per trap, we are creating an internal
for each severity level to work around issue.
Represents Red and level 4 |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
internalAMLWarning |
1.3.6.1.4.1.12028.4.15.0.56 |
This is an internal trap designed for AML
running on the NNM. It allows the AML to
dynamically accept severity codes from the AMP.
Because HP OpenView statically defines these in
trapd.conf per trap, we are creating an internal
for each severity level to work around issue.
Represents Cyan and level 6 |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
internalAMLMajor |
1.3.6.1.4.1.12028.4.15.0.57 |
This is an internal trap designed for AML
running on the NNM. It allows the AML to
dynamically accept severity codes from the AMP.
Because HP OpenView statically defines these in
trapd.conf per trap, we are creating an internal
for each severity level to work around issue.
Represents Orange and level 7 |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
uplinkDevice |
1.3.6.1.4.1.12028.4.15.0.58 |
This trap is sent when the device uplink status is changed. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
upRadio |
1.3.6.1.4.1.12028.4.15.0.59 |
This trap is sent when the radio of an AP is detected as UP
after being marked DOWN. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
configAlert |
1.3.6.1.4.1.12028.4.15.0.200 |
This trap is sent every time a new device is discovered
and authenticated on the AMP. Also sent upon change to
IP, Name, Firmware, Group Association. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
awampCompliance |
1.3.6.1.4.1.12028.4.2.1.1 |
The compliance statement for the AirWave AMP. |
Status: current |
Access: read-only |
MODULE-COMPLIANCE |
|
|
|
awampInfoGroup |
1.3.6.1.4.1.12028.4.2.2.1 |
The group of objects providing AMP information. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
awampEventGroup |
1.3.6.1.4.1.12028.4.2.2.2 |
The group of objects providing AMP events. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
awampNotificationGroup |
1.3.6.1.4.1.12028.4.2.2.3 |
The group of objects providing AMP notifications. |
Status: current |
Access: read-only |
NOTIFICATION-GROUP |
|
|
|