AVIDIA-IDSL-MIB

File: AVIDIA-IDSL-MIB.mib (42123 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC-1212
PAIRGAIN-COMMON-HD-MIB IF-MIB PerfHist-TC-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
TEXTUAL-CONVENTION DisplayString RowStatus
TruthValue TimeStamp OBJECT-TYPE
products pgainDSLAM InterfaceIndex
ifIndex PerfCurrentCount PerfIntervalCount
PerfTotalCount

Defined Types

AvAlarmStatusType  
TEXTUAL-CONVENTION    
  current INTEGER inactive(1), active(2)

AvIdslProfileType  
TEXTUAL-CONVENTION    
  current INTEGER 0..65535

AvIdslLineConfProfileEntry  
SEQUENCE    
  avIdslLineConfProfileIndex AvIdslProfileType
  avIdslLineConfProfileRowStatus RowStatus
  avIdslLineRate INTEGER
  avIdslPMMode INTEGER
  avIdslSESThreshold INTEGER

AvIdslAlarmConfProfileEntry  
SEQUENCE    
  avIdslAlarmConfProfileIndex AvIdslProfileType
  avIdslAlarmConfProfileRowStatus RowStatus
  avIdslHourlyESThreshold INTEGER
  avIdslHourlySESThreshold INTEGER
  avIdslDailyESThreshold INTEGER
  avIdslDailySESThreshold INTEGER

AvIdslCardConfigEntry  
SEQUENCE    
  avIdslCardSlotId INTEGER
  avIdslCardClockSource INTEGER

AvIdslConfigEntry  
SEQUENCE    
  avIdslLineConfProfile AvIdslProfileType
  avIdslAlarmConfProfile AvIdslProfileType
  avIdslCircuitIdentifier DisplayString

AvIdslAlarmEntry  
SEQUENCE    
  avIdslAlarmLOS AvAlarmStatusType
  avIdslAlarmESHourlyNet AvAlarmStatusType
  avIdslAlarmSESHourlyNet AvAlarmStatusType
  avIdslAlarmESHourlyCust AvAlarmStatusType
  avIdslAlarmSESHourlyCust AvAlarmStatusType
  avIdslAlarmESDailyNet AvAlarmStatusType
  avIdslAlarmSESDailyNet AvAlarmStatusType
  avIdslAlarmESDailyCust AvAlarmStatusType
  avIdslAlarmSESDailyCust AvAlarmStatusType
  avIdslAlarmLastChange TimeStamp

AvIdslCurrHourEntry  
SEQUENCE    
  avIdslCurrHourIfIndex InterfaceIndex
  avIdslCurrHourNodeId INTEGER
  avIdslCurrHourBENet PerfCurrentCount
  avIdslCurrHourESNet PerfCurrentCount
  avIdslCurrHourSESNet PerfCurrentCount
  avIdslCurrHourBECust PerfCurrentCount
  avIdslCurrHourESCust PerfCurrentCount
  avIdslCurrHourSESCust PerfCurrentCount

AvIdslCurrDayEntry  
SEQUENCE    
  avIdslCurrDayIfIndex InterfaceIndex
  avIdslCurrDayNodeId INTEGER
  avIdslCurrDayESNet PerfCurrentCount
  avIdslCurrDaySESNet PerfCurrentCount
  avIdslCurrDayESCust PerfCurrentCount
  avIdslCurrDaySESCust PerfCurrentCount

AvIdslIntervalHourEntry  
SEQUENCE    
  avIdslIntervalHourIfIndex InterfaceIndex
  avIdslIntervalHourNodeId INTEGER
  avIdslIntervalHourNumber INTEGER
  avIdslIntervalHourBENet PerfCurrentCount
  avIdslIntervalHourESNet PerfCurrentCount
  avIdslIntervalHourSESNet PerfCurrentCount
  avIdslIntervalHourBECust PerfCurrentCount
  avIdslIntervalHourESCust PerfCurrentCount
  avIdslIntervalHourSESCust PerfCurrentCount

AvIdslIntervalDayEntry  
SEQUENCE    
  avIdslIntervalDayIfIndex InterfaceIndex
  avIdslIntervalDayNodeId INTEGER
  avIdslIntervalDayNumber INTEGER
  avIdslIntervalDayESNet PerfCurrentCount
  avIdslIntervalDaySESNet PerfCurrentCount
  avIdslIntervalDayESCust PerfCurrentCount
  avIdslIntervalDaySESCust PerfCurrentCount

AvIdslStatusEntry  
SEQUENCE    
  avIdslUpState INTEGER
  avIdslSegments INTEGER 0..7
  avIdslDiagCode INTEGER
  avIdslDiagCodeNodeId INTEGER 0..7

Defined Values

avIdslMIB 1.3.6.1.4.1.927.1.15
The module defines the IDSL MIB
MODULE-IDENTITY    

avIdslMibObjects 1.3.6.1.4.1.927.1.15.1
OBJECT IDENTIFIER    

avIdslLineConfProfileIndexNext 1.3.6.1.4.1.927.1.15.1.1
This object contains an appropriate value to be used for avIdslLineConfProfileIndex when creating entries in the avIdslLineConfProfileTable. The value '0' indicates that no unassigned entries are available. To obtain the avIdslLineConfProfileIndexNext value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
OBJECT-TYPE    
  INTEGER 0..65535  

avIdslAlarmConfProfileIndexNext 1.3.6.1.4.1.927.1.15.1.2
This object contains an appropriate value to be used for avIdslAlarmConfProfileIndex when creating entries in the avIdslAlarmConfProfileTable. The value '0' indicates that no unassigned entries are available. To obtain the avIdslAlarmConfProfileIndexNext value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
OBJECT-TYPE    
  INTEGER 0..65535  

avIdslLineConfProfileTable 1.3.6.1.4.1.927.1.15.1.3
This table contains information associated with IDSL line configuration. One entry in this table reflects a configuration profile that can be referenced when configuring one or more IDSL lines.
OBJECT-TYPE    
  SEQUENCE OF  
    AvIdslLineConfProfileEntry

avIdslLineConfProfileEntry 1.3.6.1.4.1.927.1.15.1.3.1
Each entry consists of a list of parameters that represents the configuration of an IDSL port. A profile is created in one step with all necessary parameter values and avIdslLineProfileRowStatus is set to createAndGo. This RowStatus object is also used to delete profiles.
OBJECT-TYPE    
  AvIdslLineConfProfileEntry  

avIdslLineConfProfileIndex 1.3.6.1.4.1.927.1.15.1.3.1.1
This object is used to uniquely identify a row of this table
OBJECT-TYPE    
  AvIdslProfileType  

avIdslLineConfProfileRowStatus 1.3.6.1.4.1.927.1.15.1.3.1.2
This object is used to create a new row or modify or delete an existing row in this table.
OBJECT-TYPE    
  RowStatus  

avIdslLineRate 1.3.6.1.4.1.927.1.15.1.3.1.3
The desired data rate for the IDSL line.
OBJECT-TYPE    
  INTEGER rate64kbps(1), rate128kbps(2), rate144kbps(3)  

avIdslPMMode 1.3.6.1.4.1.927.1.15.1.3.1.4
The Performance Monitoring Mode for the IDSL line. Path mode treats multiple DLCI loops as a single segment. Segmented mode monitors performance statistics for each segment individually.
OBJECT-TYPE    
  INTEGER path(1), segmented(2)  

avIdslSESThreshold 1.3.6.1.4.1.927.1.15.1.3.1.5
The number of block errors in secondes that must be met or exceeded in order to count as a severely errored second.
OBJECT-TYPE    
  INTEGER 1..15  

avIdslAlarmConfProfileTable 1.3.6.1.4.1.927.1.15.1.4
This table contains information associated with the IDSL alarm configuration. One entry in this table reflects a configuration profile that can be referenced when configuring one or more IDSL lines.
OBJECT-TYPE    
  SEQUENCE OF  
    AvIdslAlarmConfProfileEntry

avIdslAlarmConfProfileEntry 1.3.6.1.4.1.927.1.15.1.4.1
Each entry consists of a list of parameters that represents the alarm configuration for an IDSL port. A profile is created in one step with all necessary parameter values and avIdslAlarmProfileRowStatus is set to createAndGo. This RowStatus object is also used to delete profiles.
OBJECT-TYPE    
  AvIdslAlarmConfProfileEntry  

avIdslAlarmConfProfileIndex 1.3.6.1.4.1.927.1.15.1.4.1.1
This object is used to uniquely identify a row in this table.
OBJECT-TYPE    
  AvIdslProfileType  

avIdslAlarmConfProfileRowStatus 1.3.6.1.4.1.927.1.15.1.4.1.2
This object is used to create a new row, or modify or delete an existing row in this table.
OBJECT-TYPE    
  RowStatus  

avIdslHourlyESThreshold 1.3.6.1.4.1.927.1.15.1.4.1.3
The number of errored seconds in an hour that must be met or exceeded in order to report EShourly alarms.
OBJECT-TYPE    
  INTEGER 0..255  

avIdslHourlySESThreshold 1.3.6.1.4.1.927.1.15.1.4.1.4
The number of severely errored seconds in an hour that must be met or exceeded in order to report SEShourly alarms.
OBJECT-TYPE    
  INTEGER 0..127  

avIdslDailyESThreshold 1.3.6.1.4.1.927.1.15.1.4.1.5
The number of errored seconds in a day that must be met or exceeded in order to report ESdaily alarms.
OBJECT-TYPE    
  INTEGER 0..4095  

avIdslDailySESThreshold 1.3.6.1.4.1.927.1.15.1.4.1.6
The number of severely errored seconds in a day that must be met or exceeded in order to report SESdaily alarms.
OBJECT-TYPE    
  INTEGER 0..2047  

avIdslCardConfigTable 1.3.6.1.4.1.927.1.15.1.5
The IDSL Card Configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    AvIdslCardConfigEntry

avIdslCardConfigEntry 1.3.6.1.4.1.927.1.15.1.5.1
An entry in the IDSL Configuration table.
OBJECT-TYPE    
  AvIdslCardConfigEntry  

avIdslCardSlotId 1.3.6.1.4.1.927.1.15.1.5.1.1
The chassis slot number where the card is installed. Value 1 represents the slot where the management card is installed. The slot numbers for adjacent slots increment by 1.
OBJECT-TYPE    
  INTEGER 1..64  

avIdslCardClockSource 1.3.6.1.4.1.927.1.15.1.5.1.2
The source of the Transmit Clock for the IDSL card. The values mean: localTiming indicates that the IDSL card's local clock source is used. sysRefATiming indicates that the AVIDIA system reference clock on channel A is used. sysRefBTiming indicates that the AVIDIA system reference clock on channel B is used.
OBJECT-TYPE    
  INTEGER localTiming(1), sysRefATiming(2), sysRefBTiming(3)  

avIdslConfigTable 1.3.6.1.4.1.927.1.15.1.6
The IDSL Configuration table.
OBJECT-TYPE    
  SEQUENCE OF  
    AvIdslConfigEntry

avIdslConfigEntry 1.3.6.1.4.1.927.1.15.1.6.1
An entry in the IDSL Configuration table.
OBJECT-TYPE    
  AvIdslConfigEntry  

avIdslLineConfProfile 1.3.6.1.4.1.927.1.15.1.6.1.1
This object identifies a row in the avIdslLineConfProfileTable that describes the line configuration profile for this interface.
OBJECT-TYPE    
  AvIdslProfileType  

avIdslAlarmConfProfile 1.3.6.1.4.1.927.1.15.1.6.1.2
This object identifies a row in the avIdslAlarmConfProfileTable that describes the alarm configuration profile for this interface.
OBJECT-TYPE    
  AvIdslProfileType  

avIdslCircuitIdentifier 1.3.6.1.4.1.927.1.15.1.6.1.3
This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.
OBJECT-TYPE    
  DisplayString Size(0..255)  

avIdslAlarmTable 1.3.6.1.4.1.927.1.15.1.7
This table provides the IDSL alarm indications.
OBJECT-TYPE    
  SEQUENCE OF  
    AvIdslAlarmEntry

avIdslAlarmEntry 1.3.6.1.4.1.927.1.15.1.7.1
Entries of the avIdsl alarm table
OBJECT-TYPE    
  AvIdslAlarmEntry  

avIdslAlarmLOS 1.3.6.1.4.1.927.1.15.1.7.1.1
Current loss of signal margin alarm status.
OBJECT-TYPE    
  AvAlarmStatusType  

avIdslAlarmESHourlyNet 1.3.6.1.4.1.927.1.15.1.7.1.2
Current hourly ES alert status in the network direction.
OBJECT-TYPE    
  AvAlarmStatusType  

avIdslAlarmSESHourlyNet 1.3.6.1.4.1.927.1.15.1.7.1.3
Current hourly SES alert status in the network direction.
OBJECT-TYPE    
  AvAlarmStatusType  

avIdslAlarmESHourlyCust 1.3.6.1.4.1.927.1.15.1.7.1.4
Current hourly ES alert status in the customer direction.
OBJECT-TYPE    
  AvAlarmStatusType  

avIdslAlarmSESHourlyCust 1.3.6.1.4.1.927.1.15.1.7.1.5
Current hourly SES alert status in the customer direction.
OBJECT-TYPE    
  AvAlarmStatusType  

avIdslAlarmESDailyNet 1.3.6.1.4.1.927.1.15.1.7.1.6
Current daily ES alert status in the network direction.
OBJECT-TYPE    
  AvAlarmStatusType  

avIdslAlarmSESDailyNet 1.3.6.1.4.1.927.1.15.1.7.1.7
Current daily SES alert status in the network direction.
OBJECT-TYPE    
  AvAlarmStatusType  

avIdslAlarmESDailyCust 1.3.6.1.4.1.927.1.15.1.7.1.8
Current daily ES alert status in the customer direction.
OBJECT-TYPE    
  AvAlarmStatusType  

avIdslAlarmSESDailyCust 1.3.6.1.4.1.927.1.15.1.7.1.9
Current daily SES alert status in the customer direction.
OBJECT-TYPE    
  AvAlarmStatusType  

avIdslAlarmLastChange 1.3.6.1.4.1.927.1.15.1.7.1.10
The value of MIB II's sysUpTime object at the time this IDSL interface last reported a change in an alarm status. If the current state was entered prior to the last re-initialization, then this object contains a zero value.
OBJECT-TYPE    
  TimeStamp  

avIdslCurrHourTable 1.3.6.1.4.1.927.1.15.1.8
This table provides performance statistics for the current hour interval.
OBJECT-TYPE    
  SEQUENCE OF  
    AvIdslCurrHourEntry

avIdslCurrHourEntry 1.3.6.1.4.1.927.1.15.1.8.1
Entries of the avIdslCurrHourTable
OBJECT-TYPE    
  AvIdslCurrHourEntry  

avIdslCurrHourIfIndex 1.3.6.1.4.1.927.1.15.1.8.1.1
The interface index value (ifIndex) that uniquely identifies the IDSL interface to which this entry is applicable.
OBJECT-TYPE    
  InterfaceIndex  

avIdslCurrHourNodeId 1.3.6.1.4.1.927.1.15.1.8.1.2
The index value that uniquely identifies the IDSL node to which this entry is applicable.
OBJECT-TYPE    
  INTEGER 0..7  

avIdslCurrHourBENet 1.3.6.1.4.1.927.1.15.1.8.1.3
The counter associated with the number of Block Errors encountered in the network direction during the current hour interval.
OBJECT-TYPE    
  PerfCurrentCount  

avIdslCurrHourESNet 1.3.6.1.4.1.927.1.15.1.8.1.4
The counter associated with the number of Errored Seconds encountered in the network direction during the current hour interval.
OBJECT-TYPE    
  PerfCurrentCount  

avIdslCurrHourSESNet 1.3.6.1.4.1.927.1.15.1.8.1.5
The counter associated with the number of Severely Errored Seconds encountered in the network direction during the current hour interval.
OBJECT-TYPE    
  PerfCurrentCount  

avIdslCurrHourBECust 1.3.6.1.4.1.927.1.15.1.8.1.6
The counter associated with the number of Block Errors encountered in the customer direction during the current hour interval.
OBJECT-TYPE    
  PerfCurrentCount  

avIdslCurrHourESCust 1.3.6.1.4.1.927.1.15.1.8.1.7
The counter associated with the number of Errored Seconds encountered in the customer direction during the current hour interval.
OBJECT-TYPE    
  PerfCurrentCount  

avIdslCurrHourSESCust 1.3.6.1.4.1.927.1.15.1.8.1.8
The counter associated with the number of Severely Errored Seconds encountered in the customer direction during the current hour interval.
OBJECT-TYPE    
  PerfCurrentCount  

avIdslCurrDayTable 1.3.6.1.4.1.927.1.15.1.9
This table provides performance statistics for the current day interval.
OBJECT-TYPE    
  SEQUENCE OF  
    AvIdslCurrDayEntry

avIdslCurrDayEntry 1.3.6.1.4.1.927.1.15.1.9.1
Entries of the avIdslCurrDayTable.
OBJECT-TYPE    
  AvIdslCurrDayEntry  

avIdslCurrDayIfIndex 1.3.6.1.4.1.927.1.15.1.9.1.1
The interface index value (ifIndex) that uniquely identifies the IDSL interface to which this entry is applicable.
OBJECT-TYPE    
  InterfaceIndex  

avIdslCurrDayNodeId 1.3.6.1.4.1.927.1.15.1.9.1.2
The index value that uniquely identifies the IDSL node to which this entry is applicable.
OBJECT-TYPE    
  INTEGER 0..7  

avIdslCurrDayESNet 1.3.6.1.4.1.927.1.15.1.9.1.3
The counter associated with the number of Errored Seconds encountered in the network direction during the current day interval.
OBJECT-TYPE    
  PerfCurrentCount  

avIdslCurrDaySESNet 1.3.6.1.4.1.927.1.15.1.9.1.4
The counter associated with the number of Severely Errored Seconds encountered in the network direction during the current day interval.
OBJECT-TYPE    
  PerfCurrentCount  

avIdslCurrDayESCust 1.3.6.1.4.1.927.1.15.1.9.1.5
The counter associated with the number of Errored Seconds encountered in the customer direction during the current day interval.
OBJECT-TYPE    
  PerfCurrentCount  

avIdslCurrDaySESCust 1.3.6.1.4.1.927.1.15.1.9.1.6
The counter associated with the number of Severely Errored Seconds encountered in the customer direction during the current day interval.
OBJECT-TYPE    
  PerfCurrentCount  

avIdslIntervalHourTable 1.3.6.1.4.1.927.1.15.1.10
This table provides performance statistics for previous hour intervals.
OBJECT-TYPE    
  SEQUENCE OF  
    AvIdslIntervalHourEntry

avIdslIntervalHourEntry 1.3.6.1.4.1.927.1.15.1.10.1
Entries of the avIdslIntervalHourTable.
OBJECT-TYPE    
  AvIdslIntervalHourEntry  

avIdslIntervalHourIfIndex 1.3.6.1.4.1.927.1.15.1.10.1.1
The interface index value (ifIndex) that uniquely identifies the IDSL interface to which this entry is applicable.
OBJECT-TYPE    
  InterfaceIndex  

avIdslIntervalHourNodeId 1.3.6.1.4.1.927.1.15.1.10.1.2
The index value that uniquely identifies the IDSL node to which this entry is applicable.
OBJECT-TYPE    
  INTEGER 0..7  

avIdslIntervalHourNumber 1.3.6.1.4.1.927.1.15.1.10.1.3
A number between 1 and 8, where 1 is the most recently completed hour interval and 8 is the hour interval completed 7 hours prior to interval 1.
OBJECT-TYPE    
  INTEGER 1..8  

avIdslIntervalHourBENet 1.3.6.1.4.1.927.1.15.1.10.1.4
The counter associated with the number of Block Errors encountered in the network direction during the specified hour interval.
OBJECT-TYPE    
  PerfCurrentCount  

avIdslIntervalHourESNet 1.3.6.1.4.1.927.1.15.1.10.1.5
The counter associated with the number of Errored Seconds encountered in the network direction during the specified hour interval.
OBJECT-TYPE    
  PerfCurrentCount  

avIdslIntervalHourSESNet 1.3.6.1.4.1.927.1.15.1.10.1.6
The counter associated with the number of Severely Errored Seconds encountered in the network direction during the specified hour interval.
OBJECT-TYPE    
  PerfCurrentCount  

avIdslIntervalHourBECust 1.3.6.1.4.1.927.1.15.1.10.1.7
The counter associated with the number of Block Errors encountered in the customer direction during the specified hour interval.
OBJECT-TYPE    
  PerfCurrentCount  

avIdslIntervalHourESCust 1.3.6.1.4.1.927.1.15.1.10.1.8
The counter associated with the number of Errored Seconds encountered in the customer direction during the specified hour interval.
OBJECT-TYPE    
  PerfCurrentCount  

avIdslIntervalHourSESCust 1.3.6.1.4.1.927.1.15.1.10.1.9
The counter associated with the number of Severely Errored Seconds encountered in the customer direction during the specified hour interval.
OBJECT-TYPE    
  PerfCurrentCount  

avIdslIntervalDayTable 1.3.6.1.4.1.927.1.15.1.11
This table provides performance statistics for the previous day intervals.
OBJECT-TYPE    
  SEQUENCE OF  
    AvIdslIntervalDayEntry

avIdslIntervalDayEntry 1.3.6.1.4.1.927.1.15.1.11.1
Entries of the avIdslIntervalDayTable.
OBJECT-TYPE    
  AvIdslIntervalDayEntry  

avIdslIntervalDayIfIndex 1.3.6.1.4.1.927.1.15.1.11.1.1
The interface index value (ifIndex) that uniquely identifies the IDSL interface to which this entry is applicable.
OBJECT-TYPE    
  InterfaceIndex  

avIdslIntervalDayNodeId 1.3.6.1.4.1.927.1.15.1.11.1.2
The index value that uniquely identifies the IDSL node to which this entry is applicable.
OBJECT-TYPE    
  INTEGER 0..7  

avIdslIntervalDayNumber 1.3.6.1.4.1.927.1.15.1.11.1.3
A number identifying the most recently completed day interval.
OBJECT-TYPE    
  INTEGER 1  

avIdslIntervalDayESNet 1.3.6.1.4.1.927.1.15.1.11.1.4
The counter associated with the number of Errored Seconds encountered in the network direction during the specified day interval.
OBJECT-TYPE    
  PerfCurrentCount  

avIdslIntervalDaySESNet 1.3.6.1.4.1.927.1.15.1.11.1.5
The counter associated with the number of Severely Errored Seconds encountered in the network direction during the specified day interval.
OBJECT-TYPE    
  PerfCurrentCount  

avIdslIntervalDayESCust 1.3.6.1.4.1.927.1.15.1.11.1.6
The counter associated with the number of Errored Seconds encountered in the customer direction during the specified day interval.
OBJECT-TYPE    
  PerfCurrentCount  

avIdslIntervalDaySESCust 1.3.6.1.4.1.927.1.15.1.11.1.7
The counter associated with the number of Severely Errored Seconds encountered in the customer direction during the specified day interval.
OBJECT-TYPE    
  PerfCurrentCount  

avIdslStatusTable 1.3.6.1.4.1.927.1.15.1.12
The IDSL Status table.
OBJECT-TYPE    
  SEQUENCE OF  
    AvIdslStatusEntry

avIdslStatusEntry 1.3.6.1.4.1.927.1.15.1.12.1
An entry in the IDSL Status table.
OBJECT-TYPE    
  AvIdslStatusEntry  

avIdslUpState 1.3.6.1.4.1.927.1.15.1.12.1.1
The state of the IDSL interface. Defined states are: 1 = The loop is up and active. 2 = The loop has synchronized with the first node. 3 = The loop is training the Digital Front End (DFE). 4 = The loop is waiting for a signal. 5 = The loop is down or disabled.
OBJECT-TYPE    
  INTEGER avIdslUpStateUp(1), avIdslUpStateSyncUp(2), avIdslUpStateTraining(3), avIdslUpStateAlerting(4), avIdslUpStateDown(5)  

avIdslSegments 1.3.6.1.4.1.927.1.15.1.12.1.2
The number of segments in the IDSL loop.
OBJECT-TYPE    
  INTEGER 0..7  

avIdslDiagCode 1.3.6.1.4.1.927.1.15.1.12.1.3
This variable is used to invoke diagnostic routines for IDSL testing. Setting this variable causes the interface to invoke the diagnostic(s) specified. The value is a bit map represented as a sum, therefore, it can represent multiple diagnostics simultaneously. Each bit is set to a value 1 to initiate the diagnostic, and set to a value 0 to terminate the diagnostic. The various bit position values are: 1: Clear the Current and Interval Performance Statistics. 2: Configure a loopback on this IDSL interface. Data is looped back in both directions. avIdslDiagCodeNodeId specifies the node on which to configure the loopback. 4: Configure the IDSL interface to execute a corrupted CRC Test. avIdslDiagCodeNodeId specifies the node on which to generate the corrupted CRC.
OBJECT-TYPE    
  INTEGER 0..7  

avIdslDiagCodeNodeId 1.3.6.1.4.1.927.1.15.1.12.1.4
The node ID of the element to which the avIdslDiagCode configuration applies. Only one node can be configured at a time, setting a node clears diagnostics on all other nodes.
OBJECT-TYPE    
  INTEGER 0..7  

avIdslTraps 1.3.6.1.4.1.927.1.15.1.13
OBJECT IDENTIFIER    

avIdslLineTraps 1.3.6.1.4.1.927.1.15.1.13.0
OBJECT IDENTIFIER    

avIdslLOSTrap 1.3.6.1.4.1.927.1.15.1.13.0.1
This trap is sent when the value of an instance of avIdslAlarmLOS changes.
NOTIFICATION-TYPE    

avIdslESHourlyNetTrap 1.3.6.1.4.1.927.1.15.1.13.0.2
This trap is sent when the value of an instance of avIdslAlarmESHourlyNet changes.
NOTIFICATION-TYPE    

avIdslSESHourlyNetTrap 1.3.6.1.4.1.927.1.15.1.13.0.3
This trap is sent when the value of an instance of avIdslAlarmSESHourlyNet changes.
NOTIFICATION-TYPE    

avIdslESHourlyCustTrap 1.3.6.1.4.1.927.1.15.1.13.0.4
This trap is sent when the value of an instance of avIdslAlarmESHourlyCust changes.
NOTIFICATION-TYPE    

avIdslSESHourlyCustTrap 1.3.6.1.4.1.927.1.15.1.13.0.5
This trap is sent when the value of an instance of avIdslAlarmSESHourlyCust changes.
NOTIFICATION-TYPE    

avIdslESDailyNetTrap 1.3.6.1.4.1.927.1.15.1.13.0.6
This trap is sent when the value of an instance of avIdslAlarmESDailyNet changes.
NOTIFICATION-TYPE    

avIdslSESDailyNetTrap 1.3.6.1.4.1.927.1.15.1.13.0.7
This trap is sent when the value of an instance of avIdslAlarmSESDailyNet changes.
NOTIFICATION-TYPE    

avIdslESDailyCustTrap 1.3.6.1.4.1.927.1.15.1.13.0.8
This trap is sent when the value of an instance of avIdslAlarmESDailyCust changes.
NOTIFICATION-TYPE    

avIdslSESDailyCustTrap 1.3.6.1.4.1.927.1.15.1.13.0.9
This trap is sent when the value of an instance of avIdslAlarmSESDailyCust changes.
NOTIFICATION-TYPE