ATT-NETGATE-MIB

Imported modules

SNMPv2-SMI	SNMPv2-TC	INET-ADDRESS-MIB
SNMPv2-CONF

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	enterprises
Integer32	TimeTicks	IpAddress
Unsigned32	NOTIFICATION-TYPE	DisplayString
DateAndTime	InetAddressIPv6	MODULE-COMPLIANCE
OBJECT-GROUP	NOTIFICATION-GROUP

Defined Types

NgDnsEntry
SEQUENCE
	ngdnIndex	Integer32
	ngdnServer	IpAddress

NgDnsIPv6Entry
SEQUENCE
	ngdnIPv6Index	Integer32
	ngdnIPv6Server	InetAddressIPv6

NgCustCommEntry
SEQUENCE
	ngcuIndex	Integer32
	ngcuCustComment	DisplayString

NgPortEntry
SEQUENCE
	ngpoIndex	Integer32
	ngpoStatus	INTEGER

NgVlanEntry
SEQUENCE
	ngvlIndex	Integer32
	ngvlId	Integer32
	ngvlPorts	DisplayString
	ngvlSpeed	INTEGER
	ngvlIpRange	DisplayString
	ngvlDhcpRelayAddr	DisplayString
	ngvlDhcpDefRoute	IpAddress
	ngvlLanAddr	IpAddress
	ngvlLanSubAddr	IpAddress
	ngvlIPv6IpRangeStart	InetAddressIPv6
	ngvlIPv6IpRangeEnd	InetAddressIPv6
	ngvlIPv6DhcpRelayAddrPri	InetAddressIPv6
	ngvlIPv6DhcpRelayAddrBak	InetAddressIPv6
	ngvlIPv6LanAddr	InetAddressIPv6
	ngvlIPv6LanPrefix	Integer32

NgVrrpEntry
SEQUENCE
	ngvrIndex	Integer32
	ngvrIface	DisplayString
	ngvrId	Integer32
	ngvrMasterStatus	INTEGER
	ngvrPriority	INTEGER

Ng3GEntry
SEQUENCE
	ng3gIndex	Integer32
	ng3gSlotNum	Integer32
	ng3gModemType	DisplayString
	ng3gManufacturer	DisplayString
	ng3gModel	DisplayString
	ng3gRevision	DisplayString
	ng3gID	DisplayString
	ng3gSignalStrength	Integer32
	ng3gCarrier	DisplayString
	ng3gImsiStatus	DisplayString
	ng3gCellConnNetwork	DisplayString
	ng3gPhoneNum	DisplayString
	ng3gApn	DisplayString
	ng3gApnUser	DisplayString
	ng3gApnPassword	DisplayString
	ng3gCellModemPresent	INTEGER
	ng3gSIMCardNumber	DisplayString
	ng3gDeviceType	INTEGER

NgTunnelEntry
SEQUENCE
	ngtuIndex	Integer32
	ngtuIpsecIface	DisplayString
	ngtuAuthState	INTEGER
	ngtuState	INTEGER
	ngtuDuration	TimeTicks
	ngtuEndpoint	IpAddress
	ngtuEndpointType	INTEGER
	ngtuBulkEncryptMode	INTEGER
	ngtuCurrEncryptCeIp	IpAddress
	ngtuEspAlg	DisplayString
	ngtuAuthAlg	DisplayString
	ngtuCompressionAlg	DisplayString
	ngtuAuthType	INTEGER
	ngtuAuthProt	INTEGER
	ngtuReasonCode	INTEGER
	ngtuServerMgmt	INTEGER
	ngtuTunInitiator	INTEGER
	ngtuTunMode	INTEGER
	ngtuIPv6Endpoint	InetAddressIPv6

NgFirewallTableEntry
SEQUENCE
	ngfwTableIndex	Integer32
	ngfwTableName	DisplayString
	ngfwTableNumberOfChains	Integer32

NgFirewallChainEntry
SEQUENCE
	ngfwChainIndex	Integer32
	ngfwChainTableIndex	Integer32
	ngfwChainName	DisplayString
	ngfwChainsNumberOfRules	Integer32

NgFirewallRuleEntry
SEQUENCE
	ngfwRuleIndex	Integer32
	ngfwRuleTableIndex	Integer32
	ngfwRuleChainIndex	Integer32
	ngfwRulePackets	Unsigned32
	ngfwRuleBytes	Unsigned32
	ngfwRuleTarget	DisplayString
	ngfwRuleProtocol	DisplayString
	ngfwRuleInIface	DisplayString
	ngfwRuleOutIface	DisplayString
	ngfwRuleSrcIp	IpAddress
	ngfwRuleSrcMask	Integer32
	ngfwRuleDstIp	IpAddress
	ngfwRuleDstMask	Integer32
	ngfwRuleMisc	DisplayString

NgIPv6FirewallTableEntry
SEQUENCE
	ngfwIPv6TableIndex	Integer32
	ngfwIPv6TableName	DisplayString
	ngfwIPv6TableNumberOfChains	Integer32

NgIPv6FirewallChainEntry
SEQUENCE
	ngfwIPv6ChainIndex	Integer32
	ngfwIPv6ChainTableIndex	Integer32
	ngfwIPv6ChainName	DisplayString
	ngfwIPv6ChainsNumberOfRules	Integer32

NgIPv6FirewallRuleEntry
SEQUENCE
	ngfwIPv6RuleIndex	Integer32
	ngfwIPv6RuleTableIndex	Integer32
	ngfwIPv6RuleChainIndex	Integer32
	ngfwIPv6RulePackets	Unsigned32
	ngfwIPv6RuleBytes	Unsigned32
	ngfwIPv6RuleTarget	DisplayString
	ngfwIPv6RuleProtocol	DisplayString
	ngfwIPv6RuleInIface	DisplayString
	ngfwIPv6RuleOutIface	DisplayString
	ngfwIPv6RuleSrcIp	InetAddressIPv6
	ngfwIPv6RuleSrcMask	Integer32
	ngfwIPv6RuleDstIp	InetAddressIPv6
	ngfwIPv6RuleDstMask	Integer32
	ngfwIPv6RuleMisc	DisplayString

NgRogueMacEntry
SEQUENCE
	ngrmIndex	Integer32
	ngrmMac	DisplayString
	ngrmTimestamp	DisplayString
	ngrmIface	DisplayString
	ngrmTimestampDAT	DateAndTime

NgDhcpLeaseEntry
SEQUENCE
	ngdhlIndex	Integer32
	ngdhlLeaseAddr	IpAddress
	ngdhlMac	DisplayString
	ngdhlHostname	DisplayString
	ngdhlPort	Integer32
	ngdhlVlanId	Integer32

Defined Values

attNetGateMIB		1.3.6.1.4.1.74.1.30.8
The MIB module for the AT&T NetGate.
MODULE-IDENTITY

att-2		1.3.6.1.4.1.74
OBJECT IDENTIFIER

att-products		1.3.6.1.4.1.74.1
OBJECT IDENTIFIER

attNetGate		1.3.6.1.4.1.74.1.30
OBJECT IDENTIFIER

ngHardwareInfo		1.3.6.1.4.1.74.1.30.1
OBJECT IDENTIFIER

ngInterfaceInfo		1.3.6.1.4.1.74.1.30.2
OBJECT IDENTIFIER

ngVlanInfo		1.3.6.1.4.1.74.1.30.3
OBJECT IDENTIFIER

ngVrrpInfo		1.3.6.1.4.1.74.1.30.4
OBJECT IDENTIFIER

ng3GInfo		1.3.6.1.4.1.74.1.30.5
OBJECT IDENTIFIER

ngTunnelInfo		1.3.6.1.4.1.74.1.30.6
OBJECT IDENTIFIER

ngCosInfo		1.3.6.1.4.1.74.1.30.7
OBJECT IDENTIFIER

ngFirewallInfo		1.3.6.1.4.1.74.1.30.9
OBJECT IDENTIFIER

ngRogueMacInfo		1.3.6.1.4.1.74.1.30.10
OBJECT IDENTIFIER

ngDialInfo		1.3.6.1.4.1.74.1.30.11
OBJECT IDENTIFIER

ngDhcpLeaseInfo		1.3.6.1.4.1.74.1.30.12
OBJECT IDENTIFIER

ngMIBConformance		1.3.6.1.4.1.74.1.30.8.1
OBJECT IDENTIFIER

ngMIBCompliances		1.3.6.1.4.1.74.1.30.8.1.1
OBJECT IDENTIFIER

ngMIBGroups		1.3.6.1.4.1.74.1.30.8.1.2
OBJECT IDENTIFIER

ngEvents		1.3.6.1.4.1.74.1.30.8.2
OBJECT IDENTIFIER

ngEventNotification		1.3.6.1.4.1.74.1.30.8.2.0
OBJECT IDENTIFIER

ngEventObjects		1.3.6.1.4.1.74.1.30.8.2.1
OBJECT IDENTIFIER

ngEventConformance		1.3.6.1.4.1.74.1.30.8.2.2
OBJECT IDENTIFIER

ngEventCompliances		1.3.6.1.4.1.74.1.30.8.2.2.1
OBJECT IDENTIFIER

ngEventGroups		1.3.6.1.4.1.74.1.30.8.2.2.2
OBJECT IDENTIFIER

nghwHardwareVersion		1.3.6.1.4.1.74.1.30.1.1
Hardware Version.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

nghwCodeVersion		1.3.6.1.4.1.74.1.30.1.2
Software code version.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

nghwAccount		1.3.6.1.4.1.74.1.30.1.3
The account in Service Manager this device is registered under.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..8)

nghwUtcOffset		1.3.6.1.4.1.74.1.30.1.4
Indicates how many minutes away from UTC time the device is located. Values must be in 30 minute increments. Valid range is -840 to 840.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-840..840

nghwDstAllowed		1.3.6.1.4.1.74.1.30.1.5
Indicates if the device is located in an area that observes daylight savings time.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	dstNotAllowed(0), dstAllowed(1)

nghwDstActive		1.3.6.1.4.1.74.1.30.1.6
Indicates if daylight savings time is current active at this date and time.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	dstNotActive(0), dstActive(1)

nghwWanConnectionMethod		1.3.6.1.4.1.74.1.30.1.7
The current primary IPv4 WAN connection setting. This is configured via the web interface and is not read from Service Manager.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	wanConfigUnknown(0), wanConfigStatic(1), wanConfigDHCP(2), wanConfigPPPoE(3), wanConfigDialPri(4), wanConfigISDNPri(5), wanConfigPPPoA(6), wanConfigCellularPer(7), wanConfigCellularPri(8)

nghwHostname		1.3.6.1.4.1.74.1.30.1.8
The name of the current host.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

nghwDnsServers		1.3.6.1.4.1.74.1.30.1.9
OBJECT IDENTIFIER

ngDnsTable		1.3.6.1.4.1.74.1.30.1.9.1
The (conceptual) table of DNS on the device. An entry shall be placed in the storage table for each DNS.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NgDnsEntry

ngDnsEntry		1.3.6.1.4.1.74.1.30.1.9.1.1
A (conceptual) entry for one logical DNS area on the host.
Status: current	Access: not-accessible
OBJECT-TYPE
	NgDnsEntry

ngdnIndex		1.3.6.1.4.1.74.1.30.1.9.1.1.1
A unique value for each logical DNS contained on the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

ngdnServer		1.3.6.1.4.1.74.1.30.1.9.1.1.2
The IP address of an indivdual name server in use.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

ngDnsIPv6Table		1.3.6.1.4.1.74.1.30.1.9.2
The (conceptual) table of IPv6 DNS on the device. An entry shall be placed in the storage table for each DNS.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NgDnsIPv6Entry

ngDnsIPv6Entry		1.3.6.1.4.1.74.1.30.1.9.2.1
A (conceptual) entry for one logical IPv6 DNS area on the host.
Status: current	Access: not-accessible
OBJECT-TYPE
	NgDnsIPv6Entry

ngdnIPv6Index		1.3.6.1.4.1.74.1.30.1.9.2.1.1
A unique value for each logical IPv6 DNS contained on the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

ngdnIPv6Server		1.3.6.1.4.1.74.1.30.1.9.2.1.2
The IPv6 IP address of an indivdual name server in use.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressIPv6

nghwDeviceStatus		1.3.6.1.4.1.74.1.30.1.10
The current device status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	deviceActive(0), deviceInActive(1), deviceDiscontinued(2), deviceNotConfigured(3), deviceBadVlanSwitch(4)

nghwLanguage		1.3.6.1.4.1.74.1.30.1.11
The language that will be displayed on the CGI web interface. The valid values are: EN = English JA = Japanese ES = Spanish BP = Brazil Portuguese FC = French Canadian TC = Traditional Chinese SC = Simplified Chinese
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..2)

nghwCustComm		1.3.6.1.4.1.74.1.30.1.12
OBJECT IDENTIFIER

ngCustCommTable		1.3.6.1.4.1.74.1.30.1.12.1
The (conceptual) table of customer info (such as comments) on the device. An entry shall be placed in the storage table for each one.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NgCustCommEntry

ngCustCommEntry		1.3.6.1.4.1.74.1.30.1.12.1.1
A (conceptual) entry for one logical customer comment area on the host.
Status: current	Access: not-accessible
OBJECT-TYPE
	NgCustCommEntry

ngcuIndex		1.3.6.1.4.1.74.1.30.1.12.1.1.1
A unique value for each logical customer info.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

ngcuCustComment		1.3.6.1.4.1.74.1.30.1.12.1.1.2
A free-format field that can be added to the AT&T NetGate's profile at a customer's request. Currently only one comment field can be specified.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

nghwPorts		1.3.6.1.4.1.74.1.30.1.13
OBJECT IDENTIFIER

ngPortTable		1.3.6.1.4.1.74.1.30.1.13.1
The (conceptual) table of ports on the device. An entry shall be placed in the storage table for each port.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NgPortEntry

ngPortEntry		1.3.6.1.4.1.74.1.30.1.13.1.1
A (conceptual) entry for one logical port area on the host.
Status: current	Access: not-accessible
OBJECT-TYPE
	NgPortEntry

ngpoIndex		1.3.6.1.4.1.74.1.30.1.13.1.1.1
A unique value for each logical port contained on the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

ngpoStatus		1.3.6.1.4.1.74.1.30.1.13.1.1.2
The link status of an individual hardware port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	inactive(0), active(1), unknown(2)

nghwCurrentWanConnectionMethod		1.3.6.1.4.1.74.1.30.1.14
The currently active IPv4 WAN connection, which may differ from the configured primary IPv4 WAN connection setting. For example, the primary IPv4 WAN is configured for DHCP (wanConfigDHCP), but because of a network outage the PPPoE secondary WAN connection (wanConfigPPPoE2) is currently providing connectivity.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	wanConfigUnknown(0), wanConfigStatic(1), wanConfigDHCP(2), wanConfigPPPoE(3), wanConfigDialPri(4), wanConfigISDNPri(5), wanConfigPPPoA(6), wanConfigCellularPer(7), wanConfigCellularPri(8), wanConfigStatic2(9), wanConfigDHCP2(10), wanConfigPPPoE2(11)

nghwIPv6WanConnectionMethod		1.3.6.1.4.1.74.1.30.1.15
The current primary IPv6 WAN connection setting. This is configured via the web interface and is not read from Service Manager.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	wanConfigUnknown(0), wanConfigIPv6Static(12), wanConfigIPv6DHCP(13), wanConfigIPv6Stateless(14), wanConfigOff(15)

nghwIPv6CurrentWanConnectionMethod		1.3.6.1.4.1.74.1.30.1.16
The currently active IPv6 WAN connection, which may differ from the configured primary IPv6 WAN connection setting. For example, the primary IPv4 WAN is configured for DHCP (wanConfigIPv6DHCP), but because of a network outage the static IP secondary WAN connection (wanConfigIPv6Static2) is currently providing connectivity.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	wanConfigUnknown(0), wanConfigIPv6Static(12), wanConfigIPv6DHCP(13), wanConfigIPv6Stateless(14), wanConfigOff(15), wanConfigIPv6Static2(16), wanConfigIPv6DHCP2(17), wanConfigIPv6Stateless2(18)

nghwLastFullQueryTimeDAT		1.3.6.1.4.1.74.1.30.1.17
The last time when the AT&T NetGate was successfully able to retrieve its full profile from an AT&T Administration Server.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

nghwLastAnyQueryTimeDAT		1.3.6.1.4.1.74.1.30.1.18
The last time when the AT&T NetGate was successfully able to retrieve its profile from an AT&T Administration Server. If this time does not match nghwLastFullQueryTimeDAT then that means only part of the profile was retrieved. This is to prevent any possible reboots if critical portions of the profile were to change.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

ngifActiveWanIface		1.3.6.1.4.1.74.1.30.2.1
The interface that is currently in use for the primary connection.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngifTotalBytesIn		1.3.6.1.4.1.74.1.30.2.2
Total bytes in on the active WAN interface.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ngifTotalBytesOut		1.3.6.1.4.1.74.1.30.2.3
Total bytes out on the active WAN interface.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ngifTimeInDial		1.3.6.1.4.1.74.1.30.2.4
How long the current dial connection has been up.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

ngVlanTable		1.3.6.1.4.1.74.1.30.3.1
The (conceptual) table of VLANs on the device. An entry shall be placed in the storage table for each VLAN.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NgVlanEntry

ngVlanEntry		1.3.6.1.4.1.74.1.30.3.1.1
A (conceptual) entry for one logical VLAN area on the host.
Status: current	Access: not-accessible
OBJECT-TYPE
	NgVlanEntry

ngvlIndex		1.3.6.1.4.1.74.1.30.3.1.1.1
A unique value for each logical VLAN contained by the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

ngvlId		1.3.6.1.4.1.74.1.30.3.1.1.2
This is the number assigned to the VLAN. Please note: A VLAN with an ID of 4070 is a special VLAN used to hold ports that are disabled.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

ngvlPorts		1.3.6.1.4.1.74.1.30.3.1.1.3
The ports assigned to the VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngvlSpeed		1.3.6.1.4.1.74.1.30.3.1.1.4
This is the speed supported on the Ethernet interfaces.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notActive(0), autoNegot(1), speed10MbitHalfDuplex(2), speed10MbitFullDuplex(3), speed100MbitHalfDuplex(4), speed100MbitFullDuplex(5)

ngvlIpRange		1.3.6.1.4.1.74.1.30.3.1.1.5
The range of IP addresses handed out via DHCP on this VLAN. Values will be 0.0.0.0 0.0.0.0 if DHCP is not enabled on this VLAN. Followed by number of addresses assigned and number of total addresses. NOTE: As of AT&T NetGate version 5.3 the number of addresses assigned will no longer be returned. A zero will be returned for that field.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngvlDhcpRelayAddr		1.3.6.1.4.1.74.1.30.3.1.1.6
When the DHCP Type is 'R', this is the address the AT&T NetGate devices uses to relay DHCP requests. This field is required when the DHCP Type is 'R'. A second address can be specified.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngvlDhcpDefRoute		1.3.6.1.4.1.74.1.30.3.1.1.7
This field is required when VRRP Active Indicator is 'Y' and is optional otherwise. If specified, it must be within the local LAN subnet of the AT&T NetGate but cannot fall within the DHCP pool start and end addresses. For the DHCP Default Route on the AT&T NetGate device profile, if entered, the address must be within the network specified by the LAN Address and LAN Subnet, but not within the address range specified by the DHCP Start Address and DHCP End Address.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

ngvlLanAddr		1.3.6.1.4.1.74.1.30.3.1.1.8
This is the LAN address for the device on the VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

ngvlLanSubAddr		1.3.6.1.4.1.74.1.30.3.1.1.9
This is the LAN subnet address for the device on the VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

ngvlIPv6IpRangeStart		1.3.6.1.4.1.74.1.30.3.1.1.10
The start of the range of IPv6 IP addresses handed out via DHCP on this VLAN. Value will be all zeroes if DHCP is not enabled on this VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressIPv6

ngvlIPv6IpRangeEnd		1.3.6.1.4.1.74.1.30.3.1.1.11
The end of the range of IPv6 IP addresses handed out via DHCP on this VLAN. Value will be all zeroes if DHCP is not enabled on this VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressIPv6

ngvlIPv6DhcpRelayAddrPri		1.3.6.1.4.1.74.1.30.3.1.1.12
When the DHCP Type is 'R', this is the primary address the AT&T NetGate devices uses to relay DHCP requests. This field is required when the DHCP Type is 'R' and IPv6 is in use.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressIPv6

ngvlIPv6DhcpRelayAddrBak		1.3.6.1.4.1.74.1.30.3.1.1.13
When the DHCP Type is 'R', this is the primary address the AT&T NetGate devices uses to relay DHCP requests.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressIPv6

ngvlIPv6LanAddr		1.3.6.1.4.1.74.1.30.3.1.1.14
This is the IPv6 LAN address for the device on the VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressIPv6

ngvlIPv6LanPrefix		1.3.6.1.4.1.74.1.30.3.1.1.15
This is the IPv6 LAN prefix for the device on the VLAN.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

ngVrrpTable		1.3.6.1.4.1.74.1.30.4.1
The (conceptual) table of VRRPs on the device. An entry shall be placed in the storage table for each VRRP.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NgVrrpEntry

ngVrrpEntry		1.3.6.1.4.1.74.1.30.4.1.1
A (conceptual) entry for one logical VRRP area on the host.
Status: current	Access: not-accessible
OBJECT-TYPE
	NgVrrpEntry

ngvrIndex		1.3.6.1.4.1.74.1.30.4.1.1.1
A unique value for each logical VRRP contained by the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

ngvrIface		1.3.6.1.4.1.74.1.30.4.1.1.2
The interface associated with this VRRP.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngvrId		1.3.6.1.4.1.74.1.30.4.1.1.3
Virtual router ID.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

ngvrMasterStatus		1.3.6.1.4.1.74.1.30.4.1.1.4
Shows what the status is (master, backup, not active).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	vrrpNotRunning(0), vrrpMasterState(1), vrrpBackupState(2), vrrpFaultState(3)

ngvrPriority		1.3.6.1.4.1.74.1.30.4.1.1.5
VRRP_PRIO_OWNER 255 /* priority of the ip owner -- rfc2338.5.3.4 / VRRP_PRIO_DFL 100 / default priority -- rfc2338.5.3.4 / VRRP_PRIO_STOP 0 / priority to stop -- rfc2338.5.3.4 */
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	stop(0), default(100), owner(255)

ng3GTable		1.3.6.1.4.1.74.1.30.5.1
The (conceptual) table of 3G cards on the device. An entry shall be placed in the storage table for each 3G card.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Ng3GEntry

ng3GEntry		1.3.6.1.4.1.74.1.30.5.1.1
A (conceptual) entry for one logical 3G card area on the host.
Status: current	Access: not-accessible
OBJECT-TYPE
	Ng3GEntry

ng3gIndex		1.3.6.1.4.1.74.1.30.5.1.1.1
A unique value for each logical 3G card contained by the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

ng3gSlotNum		1.3.6.1.4.1.74.1.30.5.1.1.2
The slot the card is plugged into. Returns -1 if no card is found.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

ng3gModemType		1.3.6.1.4.1.74.1.30.5.1.1.3
The modem type.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ng3gManufacturer		1.3.6.1.4.1.74.1.30.5.1.1.4
The 3G card manufacturer.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ng3gModel		1.3.6.1.4.1.74.1.30.5.1.1.5
The 3G card model.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ng3gRevision		1.3.6.1.4.1.74.1.30.5.1.1.6
The 3G card revision.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ng3gID		1.3.6.1.4.1.74.1.30.5.1.1.7
Either the IMEI or ESN depending on the card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ng3gSignalStrength		1.3.6.1.4.1.74.1.30.5.1.1.8
Signal Strength at the connect.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

ng3gCarrier		1.3.6.1.4.1.74.1.30.5.1.1.9
Information about the carrier.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ng3gImsiStatus		1.3.6.1.4.1.74.1.30.5.1.1.10
The IMSI attach status.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ng3gCellConnNetwork		1.3.6.1.4.1.74.1.30.5.1.1.11
The connected network.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ng3gPhoneNum		1.3.6.1.4.1.74.1.30.5.1.1.12
The cell phone number.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ng3gApn		1.3.6.1.4.1.74.1.30.5.1.1.13
The access point name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ng3gApnUser		1.3.6.1.4.1.74.1.30.5.1.1.14
The APN userid. Only populated when the access point name exists.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ng3gApnPassword		1.3.6.1.4.1.74.1.30.5.1.1.15
The APN password. Only populated when the access point name exists.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ng3gCellModemPresent		1.3.6.1.4.1.74.1.30.5.1.1.16
If the cellular modem is a supported unit that allows the AT&T NetGate to query its current status then this value will indicate whether or not the unit is physically present. Unsupported units will always have a value of 'unknown'.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), present(1), missing(2)

ng3gSIMCardNumber		1.3.6.1.4.1.74.1.30.5.1.1.17
The SIM number of the card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ng3gDeviceType		1.3.6.1.4.1.74.1.30.5.1.1.18
The type of hardware of the cellular modem.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), pcmcia(1), usb(2)

ngTunnelTable		1.3.6.1.4.1.74.1.30.6.1
The (conceptual) table of tunnels on the device. An entry shall be placed in the storage table for each tunnel.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NgTunnelEntry

ngTunnelEntry		1.3.6.1.4.1.74.1.30.6.1.1
A (conceptual) entry for one logical tunnel area on the host.
Status: current	Access: not-accessible
OBJECT-TYPE
	NgTunnelEntry

ngtuIndex		1.3.6.1.4.1.74.1.30.6.1.1.1
A unique value for each logical tunnel contained by the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

ngtuIpsecIface		1.3.6.1.4.1.74.1.30.6.1.1.2
The ipsec interface associated with the tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngtuAuthState		1.3.6.1.4.1.74.1.30.6.1.1.3
An internal state used to indicate the tunnel's current operation.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	attNotSetYet(0), attReset(1), attSentLogon(2), attRigAuthPending(3), attCertLoginPending(4), attISAKMPNegPending(5), attProtocolNegPending(6), attAuthReqAckPending(7), attAuthReqPending(8), attRunning(9), attLogoffPending(10), attQuiesed(11), attXAuthPending(12), attXAuthFailedPendingResp(13), attXAuthReqPending(14), attDialing(15), attDialingDone(16), attSASetup(17), attXAuthTimeout(18), attDialPendingResponse(19), attDialRequestingTok(20), attRetrySIG(21), attTryNextTun(22), attModeCfgPending(23), attAllTunPingsFailed(24), attRigAuthFailedPendingResp(25), attRigAuthReqPending(26)

ngtuState		1.3.6.1.4.1.74.1.30.6.1.1.4
An internal state used to indicate the tunnel's status. This state was created because the ngtuAuthState can change while the tunnel is still up. For example, when the clock is being set. This state is always attTunnelUp when the tunnel is up.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	attTunnelDown(0), attTunnelComingUp(1), attTunnelPendingDialConnection(2), attTunnelUp(3), attTunnelComingDown(4), attTunnelRestarting(5)

ngtuDuration		1.3.6.1.4.1.74.1.30.6.1.1.5
How long the tunnel has been up.
Status: current	Access: read-only
OBJECT-TYPE
	TimeTicks

ngtuEndpoint		1.3.6.1.4.1.74.1.30.6.1.1.6
IP of the endpoint the tunnel is connected to. Populated if the ngtuState is 'up'.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

ngtuEndpointType		1.3.6.1.4.1.74.1.30.6.1.1.7
Type of the endpoint the tunnel is connected to. Populated if the ngtuState is 'up'.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), nortel(3), linuxFrameSig(4), gig(5), linuxSig(6), cisco(9), vig(20)

ngtuBulkEncryptMode		1.3.6.1.4.1.74.1.30.6.1.1.8
Bulk encryption mode.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

ngtuCurrEncryptCeIp		1.3.6.1.4.1.74.1.30.6.1.1.9
Bulk encryption CE address.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

ngtuEspAlg		1.3.6.1.4.1.74.1.30.6.1.1.10
ESP algorithm.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngtuAuthAlg		1.3.6.1.4.1.74.1.30.6.1.1.11
AUTH algorithm.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngtuCompressionAlg		1.3.6.1.4.1.74.1.30.6.1.1.12
COMPRESSION algorithm.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngtuAuthType		1.3.6.1.4.1.74.1.30.6.1.1.13
Indicates the authentication server that will be used by the tunnel endpoint.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	internetOnly(0), serviceManager(1), customerDirect(2), branchOffice(3), customerDirectSm(4), noTunnelYet(999)

ngtuAuthProt		1.3.6.1.4.1.74.1.30.6.1.1.14
The authentication protocol.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), custRadius(1), custSecureID(2), custAxent(3), custCert(4), custLDAP(5), custInternal(6), branchSharedSecret(7), agnsManaged(8)

ngtuReasonCode		1.3.6.1.4.1.74.1.30.6.1.1.15
A numeric value that indicates why a tunnel came down. The one exception is tnlAlive, which is sent for the tunnel 'alive' message for a tunnel that is still up.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	discoButton(0), tnlInitiatedDisco(226), missedHeartBts(227), eth1Lost(258), eth1Restored(259), powerLost(503), tnlAlive(504), deviceStatusInactiveWasActive(506), noTunnInInetOnlyMode(507), tnlIdleTimeout(508), dialIdleTimeout(509), maxSessionTimeout(510), noReasonGiven(599)

ngtuServerMgmt		1.3.6.1.4.1.74.1.30.6.1.1.16
AGNS managed or not.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	nonAgnsManaged(0), agnsManaged(1)

ngtuTunInitiator		1.3.6.1.4.1.74.1.30.6.1.1.17
What initiated the tunnel.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	attUnknown(0), attFromUser(1), attAutoLogon(2), attPersistentLogon(3), attVpnctl(4)

ngtuTunMode		1.3.6.1.4.1.74.1.30.6.1.1.18
The tunnel control mode.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	tunnelUnknown(0), tunnelUserControl(1), tunnelUserViewOnly(2), tunnelHidden(3), tunnelMaintenance(4), tunnelWSSInternet(5)

ngtuIPv6Endpoint		1.3.6.1.4.1.74.1.30.6.1.1.19
IPv6 IP of the endpoint the tunnel is connected to. Populated if the ngtuState is 'up' and IPv6 is in use.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressIPv6

ngcoEnabled		1.3.6.1.4.1.74.1.30.7.1
Indicates if COS is enabled or not.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notActive(0), activeWithDscpRemarking(1), activeWithoutDscpRemarking(2)

ngcoNextTestTime		1.3.6.1.4.1.74.1.30.7.2
When the next bandwidth test is scheduled to run. MM/DD/YYYY HH:MM:SS. Returns '00/00/0000 00:00:00' when no test is scheduled. The time returned is the local time on the AT&T NetGate. To determine how the AT&T NetGate's local time relates to UTC view the following OIDs: nghwUtcOffset (current UTC offset), nghwDstAllowed (daylight saving time allowed), nghwDstActive (daylight savings time active). NOTE: This entry is made obsolete by ngcoNextTestTimeDAT.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngcoWanMtu		1.3.6.1.4.1.74.1.30.7.3
Current WAN interface MTU value.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

ngcoCurUpstreamBandw		1.3.6.1.4.1.74.1.30.7.4
Current upstream bandwidth high water mark in use.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ngcoCurDownstreamBandw		1.3.6.1.4.1.74.1.30.7.5
Current downstream bandwidth high water mark in use.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ngcoNextTestTimeDAT		1.3.6.1.4.1.74.1.30.7.6
When the next bandwidth test is scheduled to run. Returns January 1 year 0 time 0 when no test is scheduled. NOTE: This entry replaces ngcoNextTestTime.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

ngcoLastTestTimeDAT		1.3.6.1.4.1.74.1.30.7.7
The date and time of when the last bandwidth test was performed. NOTE: The date and time of high water marks retained after a reboot will return January 1 year 0 time 0 for the time.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

ngcoLastUpstreamResult		1.3.6.1.4.1.74.1.30.7.8
The upstream bandwidth measured when the last bandwidth test was performed.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ngcoLastDownstreamResult		1.3.6.1.4.1.74.1.30.7.9
The downstream bandwidth measured when the last bandwidth test was performed.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ngBasicComplianceRev		1.3.6.1.4.1.74.1.30.8.1.1.1
The compliance statement for AT&T NetGate entities which implement this MIB module.
Status: current	Access: read-only
MODULE-COMPLIANCE

nghwGroup		1.3.6.1.4.1.74.1.30.8.1.2.1
The hardware group.
Status: current	Access: read-only
OBJECT-GROUP

ngifGroup		1.3.6.1.4.1.74.1.30.8.1.2.2
The interface group.
Status: current	Access: read-only
OBJECT-GROUP

ngvlGroup		1.3.6.1.4.1.74.1.30.8.1.2.3
The VLAN group.
Status: current	Access: read-only
OBJECT-GROUP

ngvrGroup		1.3.6.1.4.1.74.1.30.8.1.2.4
The VRRP group.
Status: current	Access: read-only
OBJECT-GROUP

ng3gGroup		1.3.6.1.4.1.74.1.30.8.1.2.5
The 3G group.
Status: current	Access: read-only
OBJECT-GROUP

ngtuGroup		1.3.6.1.4.1.74.1.30.8.1.2.6
The tunnel group.
Status: current	Access: read-only
OBJECT-GROUP

ngcoGroup		1.3.6.1.4.1.74.1.30.8.1.2.7
The COS group.
Status: current	Access: read-only
OBJECT-GROUP

ngfwGroup		1.3.6.1.4.1.74.1.30.8.1.2.8
The firewall group.
Status: current	Access: read-only
OBJECT-GROUP

ngrmGroup		1.3.6.1.4.1.74.1.30.8.1.2.9
The Rogue MAC group.
Status: current	Access: read-only
OBJECT-GROUP

ngdiGroup		1.3.6.1.4.1.74.1.30.8.1.2.10
The dial group.
Status: current	Access: read-only
OBJECT-GROUP

ngdhlGroup		1.3.6.1.4.1.74.1.30.8.1.2.11
The DHCP leases group.
Status: current	Access: read-only
OBJECT-GROUP

ngFirewallTable		1.3.6.1.4.1.74.1.30.9.1
The (conceptual) table of firewall tables on the device. An entry shall be placed in the storage table for each table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NgFirewallTableEntry

ngFirewallTableEntry		1.3.6.1.4.1.74.1.30.9.1.1
A (conceptual) entry for one logical firewall table area on the host.
Status: current	Access: not-accessible
OBJECT-TYPE
	NgFirewallTableEntry

ngfwTableIndex		1.3.6.1.4.1.74.1.30.9.1.1.1
A unique value for each logical firewall table contained by the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

ngfwTableName		1.3.6.1.4.1.74.1.30.9.1.1.2
The name of this table.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngfwTableNumberOfChains		1.3.6.1.4.1.74.1.30.9.1.1.3
The number of chains in this particular table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65535

ngFirewallChainTable		1.3.6.1.4.1.74.1.30.9.2
The (conceptual) chain of firewall chains on the device. An entry shall be placed in the storage chain for each chain.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NgFirewallChainEntry

ngFirewallChainEntry		1.3.6.1.4.1.74.1.30.9.2.1
A (conceptual) entry for one logical firewall chain area on the host.
Status: current	Access: not-accessible
OBJECT-TYPE
	NgFirewallChainEntry

ngfwChainIndex		1.3.6.1.4.1.74.1.30.9.2.1.1
A unique value for each logical firewall chain contained by the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

ngfwChainTableIndex		1.3.6.1.4.1.74.1.30.9.2.1.2
Shows what table this chain belongs to. Corresponds to ngfwTableIndex in ngFirewallTable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65535

ngfwChainName		1.3.6.1.4.1.74.1.30.9.2.1.3
The name of this chain.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngfwChainsNumberOfRules		1.3.6.1.4.1.74.1.30.9.2.1.4
The number of rules in this particular chain.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65535

ngFirewallRuleTable		1.3.6.1.4.1.74.1.30.9.3
The (conceptual) table of firewall rules on the device. An entry shall be placed in the storage rule for each rule.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NgFirewallRuleEntry

ngFirewallRuleEntry		1.3.6.1.4.1.74.1.30.9.3.1
A (conceptual) entry for one logical firewall rule area on the host.
Status: current	Access: not-accessible
OBJECT-TYPE
	NgFirewallRuleEntry

ngfwRuleIndex		1.3.6.1.4.1.74.1.30.9.3.1.1
A unique value for each logical firewall rule contained by the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

ngfwRuleTableIndex		1.3.6.1.4.1.74.1.30.9.3.1.2
Shows what table this rule belongs to. Corresponds to ngfwTableIndex in ngFirewallTable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65535

ngfwRuleChainIndex		1.3.6.1.4.1.74.1.30.9.3.1.3
Shows what chain this rule belongs to. Corresponds to ngfwChainIndex in ngFirewallChainTable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65535

ngfwRulePackets		1.3.6.1.4.1.74.1.30.9.3.1.4
Total packets for this rule.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ngfwRuleBytes		1.3.6.1.4.1.74.1.30.9.3.1.5
Total bytes for this rule.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ngfwRuleTarget		1.3.6.1.4.1.74.1.30.9.3.1.6
The rule target.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngfwRuleProtocol		1.3.6.1.4.1.74.1.30.9.3.1.7
The rule protocol.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngfwRuleInIface		1.3.6.1.4.1.74.1.30.9.3.1.8
The rule input interface.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngfwRuleOutIface		1.3.6.1.4.1.74.1.30.9.3.1.9
The rule output interface.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngfwRuleSrcIp		1.3.6.1.4.1.74.1.30.9.3.1.10
The rule source IP.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

ngfwRuleSrcMask		1.3.6.1.4.1.74.1.30.9.3.1.11
The rule source mask in CIDR-compliant format.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

ngfwRuleDstIp		1.3.6.1.4.1.74.1.30.9.3.1.12
The rule destination IP.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

ngfwRuleDstMask		1.3.6.1.4.1.74.1.30.9.3.1.13
The rule destination mask in CIDR-compliant format.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

ngfwRuleMisc		1.3.6.1.4.1.74.1.30.9.3.1.14
The rule MISC section.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngfwIpConntrackNumEntries		1.3.6.1.4.1.74.1.30.9.4
The number entries in the ip_conntrack file.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

ngfwIpConntrackMaxNumEntries		1.3.6.1.4.1.74.1.30.9.5
The maximum number of entries in the ip_conntrack file.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

ngIPv6FirewallTable		1.3.6.1.4.1.74.1.30.9.6
The (conceptual) table of IPv6 firewall tables on the device. An entry shall be placed in the storage table for each table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NgIPv6FirewallTableEntry

ngIPv6FirewallTableEntry		1.3.6.1.4.1.74.1.30.9.6.1
A (conceptual) entry for one logical IPv6 firewall table area on the host.
Status: current	Access: not-accessible
OBJECT-TYPE
	NgIPv6FirewallTableEntry

ngfwIPv6TableIndex		1.3.6.1.4.1.74.1.30.9.6.1.1
A unique value for each logical IPv6 firewall table contained by the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

ngfwIPv6TableName		1.3.6.1.4.1.74.1.30.9.6.1.2
The name of this table.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngfwIPv6TableNumberOfChains		1.3.6.1.4.1.74.1.30.9.6.1.3
The number of chains in this particular table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65535

ngIPv6FirewallChainTable		1.3.6.1.4.1.74.1.30.9.7
The (conceptual) chain of IPv6 firewall chains on the device. An entry shall be placed in the storage chain for each chain.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NgIPv6FirewallChainEntry

ngIPv6FirewallChainEntry		1.3.6.1.4.1.74.1.30.9.7.1
A (conceptual) entry for one logical IPv6 firewall chain area on the host.
Status: current	Access: not-accessible
OBJECT-TYPE
	NgIPv6FirewallChainEntry

ngfwIPv6ChainIndex		1.3.6.1.4.1.74.1.30.9.7.1.1
A unique value for each logical IPv6 firewall chain contained by the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

ngfwIPv6ChainTableIndex		1.3.6.1.4.1.74.1.30.9.7.1.2
Shows what table this chain belongs to. Corresponds to ngfwIPv6TableIndex in ngIPv6FirewallTable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65535

ngfwIPv6ChainName		1.3.6.1.4.1.74.1.30.9.7.1.3
The name of this chain.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngfwIPv6ChainsNumberOfRules		1.3.6.1.4.1.74.1.30.9.7.1.4
The number of rules in this particular chain.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65535

ngIPv6FirewallRuleTable		1.3.6.1.4.1.74.1.30.9.8
The (conceptual) table of IPv6 firewall rules on the device. An entry shall be placed in the storage rule for each rule.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NgIPv6FirewallRuleEntry

ngIPv6FirewallRuleEntry		1.3.6.1.4.1.74.1.30.9.8.1
A (conceptual) entry for one logical IPv6 firewall rule area on the host.
Status: current	Access: not-accessible
OBJECT-TYPE
	NgIPv6FirewallRuleEntry

ngfwIPv6RuleIndex		1.3.6.1.4.1.74.1.30.9.8.1.1
A unique value for each logical IPv6 firewall rule contained by the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

ngfwIPv6RuleTableIndex		1.3.6.1.4.1.74.1.30.9.8.1.2
Shows what table this rule belongs to. Corresponds to ngfwIPv6TableIndex in ngIPv6FirewallTable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65535

ngfwIPv6RuleChainIndex		1.3.6.1.4.1.74.1.30.9.8.1.3
Shows what chain this rule belongs to. Corresponds to ngfwIPv6ChainIndex in ngIPv6FirewallChainTable.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..65535

ngfwIPv6RulePackets		1.3.6.1.4.1.74.1.30.9.8.1.4
Total packets for this rule.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ngfwIPv6RuleBytes		1.3.6.1.4.1.74.1.30.9.8.1.5
Total bytes for this rule.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ngfwIPv6RuleTarget		1.3.6.1.4.1.74.1.30.9.8.1.6
The rule target.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngfwIPv6RuleProtocol		1.3.6.1.4.1.74.1.30.9.8.1.7
The rule protocol.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngfwIPv6RuleInIface		1.3.6.1.4.1.74.1.30.9.8.1.8
The rule input interface.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngfwIPv6RuleOutIface		1.3.6.1.4.1.74.1.30.9.8.1.9
The rule output interface.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngfwIPv6RuleSrcIp		1.3.6.1.4.1.74.1.30.9.8.1.10
The rule source IP. Not used and set to all zeroes for IPv4 firewall output.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddressIPv6

ngfwIPv6RuleSrcMask		1.3.6.1.4.1.74.1.30.9.8.1.11
The rule source mask in CIDR-compliant format. Not used and set to all zeroes for IPv4 firewall output.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

ngfwIPv6RuleDstIp		1.3.6.1.4.1.74.1.30.9.8.1.12
The rule source IP. Not used and set to all zeroes for IPv4 firewall output.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddressIPv6

ngfwIPv6RuleDstMask		1.3.6.1.4.1.74.1.30.9.8.1.13
The rule source mask in CIDR-compliant format. Not used and set to all zeroes for IPv4 firewall output.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

ngfwIPv6RuleMisc		1.3.6.1.4.1.74.1.30.9.8.1.14
The rule MISC section.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngRogueMacStatus		1.3.6.1.4.1.74.1.30.10.1
Inidicates whether or not Rogue MAC detection has been enabled in Service Manager.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	disabled(0), enabled(1)

ngRogueMacTable		1.3.6.1.4.1.74.1.30.10.2
The (conceptual) table of rogue MACs detected by the device. An entry shall be placed in the storage table for each rogue MAC.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NgRogueMacEntry

ngRogueMacEntry		1.3.6.1.4.1.74.1.30.10.2.1
A (conceptual) entry for one logical rogue MAC area on the host.
Status: current	Access: not-accessible
OBJECT-TYPE
	NgRogueMacEntry

ngrmIndex		1.3.6.1.4.1.74.1.30.10.2.1.1
A unique value for each logical rogue MAC detected by the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

ngrmMac		1.3.6.1.4.1.74.1.30.10.2.1.2
The MAC address of this detected rogue MAC. One entry that is zeroed out is returned when there are no rogue MACs detected.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngrmTimestamp		1.3.6.1.4.1.74.1.30.10.2.1.3
The date and time of when this rogue MAC was detected. Returned as a regular string in the format MM/DD/YYYY HH:MM:SS. Returns '00/00/0000 00:00:00' when there are no rogue MACs detected. The time returned is the local time on the AT&T NetGate. To determine how the AT&T NetGate's local time relates to UTC view the following OIDs: nghwUtcOffset (current UTC offset), nghwDstAllowed (daylight saving time allowed), nghwDstActive (daylight savings time active). NOTE: This entry is made obsolete by ngrmTimestampDAT.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngrmIface		1.3.6.1.4.1.74.1.30.10.2.1.4
The interface this rogue MAC was detected on. One entry that with a value of 'NONE' and a msg is returned when there are no rogue MACs detected.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngrmTimestampDAT		1.3.6.1.4.1.74.1.30.10.2.1.5
The date and time of when this rogue MAC was detected. Returns January 1 year 0 time 0 when there are no rogue MACs detected or the time is unknown. NOTE: This entry replaces ngrmTimestamp.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

ngdiPhoneNum		1.3.6.1.4.1.74.1.30.11.1
The full phone number that will be dialed by the AT&T NetGate. This also includes dial prefix information. For example, the AT&T NetGate might have to dial the number nine and then a comma to access an outside line. The nine and the comma will be included in this entry.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngdiLastTestResult		1.3.6.1.4.1.74.1.30.11.2
The result of the last dial test. If no dial test has been performed yet then 'failure' is returned. If a dial test is not needed because dial is currently up then 'success' is returned.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	failure(0), success(1)

ngdiLastTestCompleteTime		1.3.6.1.4.1.74.1.30.11.3
The approximate time the last dial test completed given in the format MM/DD/YYYY HH:MM:SS. Returns '00/00/0000 00:00:00' when no test is scheduled. or when no test has run yet. If the dial connection is currently in use then the dial test is not needed (since dial is obviously already working). ngdiLastTestCompleteTime is simply updated to the recent time whent the AT&T NetGate last verified that the dial connection was still up. The time returned is the local time on the AT&T NetGate. To determine how the AT&T NetGate's local time relates to UTC view the following OIDs: nghwUtcOffset (current UTC offset), nghwDstAllowed (daylight saving time allowed), nghwDstActive (daylight savings time active). NOTE: This entry is made obsolete by ngdiLastTestCompleteTimeDAT.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngdiDialTestFailCategory		1.3.6.1.4.1.74.1.30.11.4
Shows what type of category the dial test failure would be put in. For example, a busy signal would return dialProblemWarning but a bad password would return dialProblemError. If a dial test is not needed because dial is currently up then dialProblemMessage is returned.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	dialProblemError(0), dialProblemWarning(1), dialProblemMessage(2), dialProblemNoCategory(3)

ngdiDialTestFailReason		1.3.6.1.4.1.74.1.30.11.5
String that shows why the dial test failed. If the test was successful or the dial connection is currently up then 'success' is returned.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString

ngdiLastTestCompleteTimeDAT		1.3.6.1.4.1.74.1.30.11.6
If the dial connection is currently in use then the dial test is not needed (since dial is obviously already working). ngdiLastTestCompleteTimeDAT is simply updated to the recent time whent the AT&T NetGate last verified that the dial connection was still up. Returns January 1 year 0 time 0 when no test is scheduled or when no test has run yet. The time returned is the local time on the AT&T NetGate. To determine how the AT&T NetGate's local time relates to UTC view the following OIDs: nghwUtcOffset (current UTC offset), nghwDstAllowed (daylight saving time allowed), nghwDstActive (daylight savings time active). NOTE: This entry replaces ngdiLastTestCompleteTime.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

ngdiSecondaryPhoneNum		1.3.6.1.4.1.74.1.30.11.7
Specifies the secondary phone number to be tried for Dial Backup in case the primary Dial Backup phone number is not available.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngDhcpLeaseTable		1.3.6.1.4.1.74.1.30.12.1
The (conceptual) table of all current, active DHCP leases on the device. An entry shall be placed in the storage table for each DHCP lease.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		NgDhcpLeaseEntry

ngDhcpLeaseEntry		1.3.6.1.4.1.74.1.30.12.1.1
A (conceptual) entry for one logical DHCP lease on the host.
Status: current	Access: not-accessible
OBJECT-TYPE
	NgDhcpLeaseEntry

ngdhlIndex		1.3.6.1.4.1.74.1.30.12.1.1.1
A unique value for each logical DHCP lease contained by the device.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..65535

ngdhlLeaseAddr		1.3.6.1.4.1.74.1.30.12.1.1.2
The IP address associated with an indivdual DHCP lease.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

ngdhlMac		1.3.6.1.4.1.74.1.30.12.1.1.3
The MAC address associated with an indivdual DHCP lease.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngdhlHostname		1.3.6.1.4.1.74.1.30.12.1.1.4
The hostname associated with an indivdual DHCP lease.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

ngdhlPort		1.3.6.1.4.1.74.1.30.12.1.1.5
The physical port (if valid) on the device associated with an indivdual DHCP lease.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

ngdhlVlanId		1.3.6.1.4.1.74.1.30.12.1.1.6
The VLAN ID on the device associated with an indivdual DHCP lease.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

ngevNetGateMac		1.3.6.1.4.1.74.1.30.8.2.1.1
The MAC address associated with this AT&T NetGate.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString

ngevRogueMac		1.3.6.1.4.1.74.1.30.8.2.1.2
The MAC address of the unauthorized machine detected when MAC monitoring is enabled.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString

ngevActiveWanIp		1.3.6.1.4.1.74.1.30.8.2.1.3
The IP address of the active WAN interface. When viewing the output of the SNMP tree this can be determined from the interface statistics. However, for traps the active WAN interface might not be used to send the trap (i.e. it could be down the tunnel. Set to zero if not used.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	IpAddress

ngevIpConntrackMaxPercentage		1.3.6.1.4.1.74.1.30.8.2.1.4
An alert will be sent when the ip_conntrack table is within this percentage of the maximum.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	1..65535

ngevIpConntrackCurrentPercentage		1.3.6.1.4.1.74.1.30.8.2.1.5
The ip_conntrack table is currently at this percentage of the maximum.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	0..65535

ngevTimeInDial		1.3.6.1.4.1.74.1.30.8.2.1.6
The number of minutes the device has been connected via dial.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	1..65535

ngevQueryProblem		1.3.6.1.4.1.74.1.30.8.2.1.7
Used to indicate what type of problem is happening with the device's status. profileNotFound means that a profile for the device was not found on an AT&T Administration Server in any region. discontinuingTheDevice means that the device has gone too long without having a valid profile in any region. bandwNoResults means that a bandwidth test failed and no previous bandwidth test results have been found, which results in the device being marked as discontinued until a bandwidth test works.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	profileNotFound(0), discontinuingTheDevice(1), bandwNoResults(2)

ngevTunConnectionId		1.3.6.1.4.1.74.1.30.8.2.1.8
Use to tie this trap to a trap for the tunnel disconnect.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString

ngevTunnelDateAndTime		1.3.6.1.4.1.74.1.30.8.2.1.9
The timestamp from when the tunnel came up, tried to come up, or came down.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DateAndTime

ngevConnectionType		1.3.6.1.4.1.74.1.30.8.2.1.10
Indicates whether the tunnel is via broadband or dial.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	connTypeBroadband(0), connTypeAgnsDial(1), connTypeOtherIspDial(2)

ngevAccount		1.3.6.1.4.1.74.1.30.8.2.1.11
In the tunnel up/down trap it is the customer account used to start the tunnel. In the secondary auth attempt trap it is the account used for the login attempt.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString	Size(1..8)

ngevUserid		1.3.6.1.4.1.74.1.30.8.2.1.12
In the tunnel up/down trap it is the customer userid used to start the tunnel. In the secondary auth attempt trap it is the userid used for the login attempt.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString

ngevTunConReason		1.3.6.1.4.1.74.1.30.8.2.1.13
String that shows a message that explains the results of a tunnel connection attempt.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString

ngevDialTestFailReason		1.3.6.1.4.1.74.1.30.8.2.1.14
String that shows why the dial test failed.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString

ngevSshSourceIp		1.3.6.1.4.1.74.1.30.8.2.1.15
The IP address of the client that ssh'ed into the device.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	IpAddress

ngevRequestorIp		1.3.6.1.4.1.74.1.30.8.2.1.16
The IP address of the machine that initiated a particular request (reboot, shutdown, secondary auth attempt, etc.). Will be set to loopback if an automated process caused the reboot.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	IpAddress

ngevDialTestFailCategory		1.3.6.1.4.1.74.1.30.8.2.1.17
Shows what type of category the dial test failure would be put in. For example, a busy signal would be a warning but a bad password would be an error.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	dialProblemError(0), dialProblemWarning(1), dialProblemMessage(2), dialProblemNoCategory(3)

ngevRogueIp		1.3.6.1.4.1.74.1.30.8.2.1.18
The IP address of the unauthorized machine detected when MAC monitoring is enabled. Set to zero if not used.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	IpAddress

ngevRogueInterface		1.3.6.1.4.1.74.1.30.8.2.1.19
The interface of the unauthorized machine detected when MAC monitoring is enabled.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString

ngevTrapDescription		1.3.6.1.4.1.74.1.30.8.2.1.20
For MAC monitoring this is the Service Manager description field. Other traps may use this field for other purposes.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString

ngevLoginResult		1.3.6.1.4.1.74.1.30.8.2.1.21
Specifies the result of the secondary login attempt when someone tries to ssh into the AT&T NetGate.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	failure(0), success(1)

ngevNewLocalID		1.3.6.1.4.1.74.1.30.8.2.1.22
The userid that the user became after their secondary login attempt was successful. Secondary logins are performed when someone tries to ssh into the AT&T NetGate. The userid that the user became (or tried to become) for their switch user attempt.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString

ngevOldLocalID		1.3.6.1.4.1.74.1.30.8.2.1.23
The userid that was in use when the user made their switch user attempt.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString

ngevMaxTimeInDialUntilAlert		1.3.6.1.4.1.74.1.30.8.2.1.24
The max number of minutes the device can be connected via dial without a trap being sent for excessive dial. Once this maximum is reached a trap will be sent.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	TimeTicks

ngevPortDown		1.3.6.1.4.1.74.1.30.8.2.1.25
An individual port that is currently not active. Only used by the AT&T NetGate 8200V.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	0..65535

ngevIPv6ActiveWanIp		1.3.6.1.4.1.74.1.30.8.2.1.26
The IP address of the active IPv6 WAN interface. When viewing the output of the SNMP tree this can be determined from the interface statistics. However, for traps the active WAN interface might not be used to send the trap (i.e. it could be down the tunnel. Set to zero if not used.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddressIPv6

ngevIPv6RogueIp		1.3.6.1.4.1.74.1.30.8.2.1.27
The IPv6 IP address of the unauthorized machine detected when MAC monitoring is enabled. Set to zero if not used.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddressIPv6

ngevIPv6RequestorIp		1.3.6.1.4.1.74.1.30.8.2.1.28
The IPv6 IP address of the machine that initiated a particular request (reboot, shutdown, secondary auth attempt, etc.). Will be set to loopback if an automated process caused the reboot.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddressIPv6

ngevCardNotFoundTime		1.3.6.1.4.1.74.1.30.8.2.1.29
The timestamp that indicates when the AT&T NetGate noted that the required cellular card was missing.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DateAndTime

ngevVPNServiceIPv4Address		1.3.6.1.4.1.74.1.30.8.2.1.30
The VPN Service Address assigned for this tunnel connetino. Will be not set if this is an IPv6 tunnel or the tunnel did not come up.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	IpAddress

ngevVPNServiceIPv6Address		1.3.6.1.4.1.74.1.30.8.2.1.31
The VPN Service Address assigned for this tunnel connetino. Will be not set if this is an IPv4 tunnel or the tunnel did not come up.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetAddressIPv6

ngevTunConReasonNUM		1.3.6.1.4.1.74.1.30.8.2.1.32
A numeric value that indicates the results of a tunnel connection attempt.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

ngevIpConntrackTable		1.3.6.1.4.1.74.1.30.8.2.0.1
Sent if the Firewall Connection table reaches the specified threshold.
Status: current	Access: read-only
NOTIFICATION-TYPE

ngevIpConntrackTableFull		1.3.6.1.4.1.74.1.30.8.2.0.2
Indicates the firewall Connection table has reached capacity.
Status: current	Access: read-only
NOTIFICATION-TYPE

ngevExcessiveDial		1.3.6.1.4.1.74.1.30.8.2.0.3
The device has been in dial backup longer than the allowed threshold.
Status: current	Access: read-only
NOTIFICATION-TYPE

ngevActiveWanIpChanged		1.3.6.1.4.1.74.1.30.8.2.0.4
The IP address associated with the active WAN interface has changed. For example, dial backup was initiated because WAN connectivity was lost. Another example is that a PPPoE connection changed its IP address.
Status: current	Access: read-only
NOTIFICATION-TYPE

ngevRogueMacDetected		1.3.6.1.4.1.74.1.30.8.2.0.5
The unauthorized MAC detection feature is enabled and an unauthorized MAC address was detected.
Status: current	Access: read-only
NOTIFICATION-TYPE

ngevRogueMacNoFile		1.3.6.1.4.1.74.1.30.8.2.0.6
The unauthorized MAC detection feature is enabled and the authorized MAC file doesn't exist.
Status: current	Access: read-only
NOTIFICATION-TYPE

ngevNoTeps		1.3.6.1.4.1.74.1.30.8.2.0.7
The AT&T NetGate cannot bring up a tunnel to any of the tunnel endpoints.
Status: current	Access: read-only
NOTIFICATION-TYPE

ngevDeviceDiscoOrNotFound		1.3.6.1.4.1.74.1.30.8.2.0.8
Sent if the AT&T NetGate profile is not found. If the AT&T NetGate goes too long without finding its device profile then the device will switch its status to discontinued, which will also trigger a trap/inform.
Status: current	Access: read-only
NOTIFICATION-TYPE

ngevTunnelUp		1.3.6.1.4.1.74.1.30.8.2.0.9
Information about the results of a tunnel connection attempt.
Status: current	Access: read-only
NOTIFICATION-TYPE

ngevTunnelDown		1.3.6.1.4.1.74.1.30.8.2.0.10
Information about a tunnel disconnect. The one exception is a tunnel 'alive' message, which is sent for a tunnel that is still up. Tunnel 'alive' messages have a ngtuReasonCode of tnlAlive.
Status: current	Access: read-only
NOTIFICATION-TYPE

ngevDialAutotestFailure		1.3.6.1.4.1.74.1.30.8.2.0.11
The Dial Autotest failed.
Status: current	Access: read-only
NOTIFICATION-TYPE

ngevDeviceReboot		1.3.6.1.4.1.74.1.30.8.2.0.12
Sent when the device reboots. Requestor IP will be set to loopback if an automated process caused the reboot.
Status: current	Access: read-only
NOTIFICATION-TYPE

ngevDeviceShutdown		1.3.6.1.4.1.74.1.30.8.2.0.13
Sent when the device shuts down.
Status: current	Access: read-only
NOTIFICATION-TYPE

ngevSshLogin		1.3.6.1.4.1.74.1.30.8.2.0.14
Sent when a user accesses the device via SSH.
Status: current	Access: read-only
NOTIFICATION-TYPE

ngevDhcpPoolExhausted		1.3.6.1.4.1.74.1.30.8.2.0.15
Sent when a VLAN's DHCP pool is full.
Status: current	Access: read-only
NOTIFICATION-TYPE

ngevForTestingOnly		1.3.6.1.4.1.74.1.30.8.2.0.16
Only for use by QA and development for testing.
Status: current	Access: read-only
NOTIFICATION-TYPE

ngevSecondaryAuthAttempt		1.3.6.1.4.1.74.1.30.8.2.0.17
Sent when a secondary login attempt occurs. Secondary logins are performed when someone tries to ssh into the AT&T NetGate.
Status: current	Access: read-only
NOTIFICATION-TYPE

ngevSwitchUseridAttempt		1.3.6.1.4.1.74.1.30.8.2.0.18
Sent when a user who is ssh'ed into the AT&T NetGate tries to switch to another userid.
Status: current	Access: read-only
NOTIFICATION-TYPE

ngev8200VPortDown		1.3.6.1.4.1.74.1.30.8.2.0.19
Sent when either port 7 or 8 is determined to be not active. Only used by the AT&T NetGate 8200V.
Status: current	Access: read-only
NOTIFICATION-TYPE

ngevCellModemRequired		1.3.6.1.4.1.74.1.30.8.2.0.20
Sent when either the AT&T NetGate boots without a cell modem present or when the AT&T NetGate detects that the cell modem has been removed. The cellular modem must be a supported unit that allows the AT&T NetGate to query its current status.
Status: current	Access: read-only
NOTIFICATION-TYPE

ngevBasicComplianceRev		1.3.6.1.4.1.74.1.30.8.2.2.1.1
The compliance statement for AT&T NetGate entities which implement this MIB module.
Status: current	Access: read-only
MODULE-COMPLIANCE

ngevNotificationsGroup		1.3.6.1.4.1.74.1.30.8.2.2.2.1
The event notifications
Status: current	Access: read-only
NOTIFICATION-GROUP

ngevObjectsGroup		1.3.6.1.4.1.74.1.30.8.2.2.2.2
The event ojects.
Status: current	Access: read-only
OBJECT-GROUP