ATMEDIA-MIB

File: ATMEDIA-MIB.mib (78522 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC

Imported symbols

OBJECT-TYPE TimeTicks Counter32
Gauge32 Counter64 enterprises
DateAndTime

Defined Types

DisplayString  
OCTET STRING    

AcIfEntry  
SEQUENCE    
  acIfIndex INTEGER
  acIfDescr DisplayString
  acIfPhyType INTEGER
  acIfSpeed Gauge32
  acIfRevision DisplayString

AcEcEntry  
SEQUENCE    
  acEcIndex INTEGER
  acEcDescr DisplayString
  acEcRevision DisplayString

AcInterfaceStatusEntry  
SEQUENCE    
  acInterfaceStatusIndex INTEGER
  acInterfaceStatusState INTEGER
  acInterfaceStatusLastChange TimeTicks
  acInterfaceStatusDescr DisplayString
  acInterfaceStatusRxCells Counter64
  acInterfaceStatusTxCells Counter64
  acInterfaceStatusRxBytes Counter64
  acInterfaceStatusTxBytes Counter64
  acInterfaceStatusRxRate Gauge32
  acInterfaceStatusTxRate Gauge32

AcEncryptorStatusEntry  
SEQUENCE    
  acEncryptorStatusIndex INTEGER
  acEncryptorStatusState INTEGER
  acEncryptorStatusLastChange TimeTicks
  acEncryptorStatusDescr DisplayString

AcSonetStatusEntry  
SEQUENCE    
  acSonetStatusIndex INTEGER
  acSonetStatusState INTEGER
  acSonetStatusLOS INTEGER
  acSonetStatusOOF INTEGER
  acSonetStatusLOC INTEGER
  acSonetStatusLineAIS INTEGER
  acSonetStatusLineRDI INTEGER
  acSonetStatusPathAIS INTEGER
  acSonetStatusPathYellow INTEGER
  acSonetStatusCustom INTEGER
  acSonetStatusDescr DisplayString

AcSonetAlarmsEntry  
SEQUENCE    
  acSonetAlarmsIndex INTEGER
  acSonetAlarmsLOS Counter64
  acSonetAlarmsLineAIS Counter64
  acSonetAlarmsLineRDI Counter64
  acSonetAlarmsPathAIS Counter64
  acSonetAlarmsPathYellow Counter64

AcSonetErrCounterEntry  
SEQUENCE    
  acSonetErrCounterIndex INTEGER
  acSonetErrCounterOOF Counter64
  acSonetErrCounterLOC Counter64
  acSonetErrCounterB1BIP Counter64
  acSonetErrCounterB2BIP Counter64
  acSonetErrCounterB3BIP Counter64
  acSonetErrCounterLineFEBE Counter64
  acSonetErrCounterPathFEBE Counter64
  acSonetErrCounterHEC Counter64

AcSonetEtsCounterEntry  
SEQUENCE    
  acSonetEtsCounterIndex INTEGER
  acSonetEtsCounterOOF Counter64
  acSonetEtsCounterLOC Counter64
  acSonetEtsCounterB1BIP Counter64
  acSonetEtsCounterB2BIP Counter64
  acSonetEtsCounterB3BIP Counter64
  acSonetEtsCounterLineFEBE Counter64
  acSonetEtsCounterPathFEBE Counter64
  acSonetEtsCounterHEC Counter64

AcE3StatusEntry  
SEQUENCE    
  acE3StatusIndex INTEGER
  acE3StatusState INTEGER
  acE3StatusLOS INTEGER
  acE3StatusOOF INTEGER
  acE3StatusLOC INTEGER
  acE3StatusAIS INTEGER
  acE3StatusMAFERF INTEGER
  acE3StatusCustom INTEGER
  acE3StatusDescr DisplayString

AcE3AlarmsEntry  
SEQUENCE    
  acE3AlarmsIndex INTEGER
  acE3AlarmsLOS Counter64
  acE3AlarmsAIS Counter64
  acE3AlarmsMAFERF Counter64

AcE3ErrCounterEntry  
SEQUENCE    
  acE3ErrCounterIndex INTEGER
  acE3ErrCounterLCV Counter64
  acE3ErrCounterOOF Counter64
  acE3ErrCounterLOC Counter64
  acE3ErrCounterBIP Counter64
  acE3ErrCounterMAFEBE Counter64
  acE3ErrCounterHEC Counter64

AcE3EtsCounterEntry  
SEQUENCE    
  acE3EtsCounterIndex INTEGER
  acE3EtsCounterLCV Counter64
  acE3EtsCounterOOF Counter64
  acE3EtsCounterLOC Counter64
  acE3EtsCounterBIP Counter64
  acE3EtsCounterMAFEBE Counter64
  acE3EtsCounterHEC Counter64

AcGigabitStatusEntry  
SEQUENCE    
  acGigabitStatusIndex INTEGER
  acGigabitStatusState INTEGER
  acGigabitStatusLOS INTEGER
  acGigabitStatusLossofSync INTEGER
  acGigabitStatusLinkDown INTEGER
  acGigabitStatusCustom INTEGER
  acGigabitStatusDescr DisplayString

AcGigabitAlarmsEntry  
SEQUENCE    
  acGigabitAlarmsIndex INTEGER
  acGigabitAlarmsLOS Counter64
  acGigabitAlarmsLinkDown Counter64

AcGigabitErrCounterEntry  
SEQUENCE    
  acGigabitErrCounterIndex INTEGER
  acGigabitErrCounterTotalFrame Counter64
  acGigabitErrCounterErroredFrame Counter64
  acGigabitErrCounterFalseCarrier Counter64
  acGigabitErrCounterLossofSync Counter64
  acGigabitErrCounterLineError Counter64

AcGigabitEtsCounterEntry  
SEQUENCE    
  acGigabitEtsCounterIndex INTEGER
  acGigabitEtsCounterTotalFrame Counter64
  acGigabitEtsCounterErroredFrame Counter64
  acGigabitEtsCounterFalseCarrier Counter64
  acGigabitEtsCounterLossofSync Counter64
  acGigabitEtsCounterLineError Counter64

AcFibrechannelStatusEntry  
SEQUENCE    
  acFibrechannelStatusIndex INTEGER
  acFibrechannelStatusState INTEGER
  acFibrechannelStatusLOS INTEGER
  acFibrechannelStatusLossofSync INTEGER
  acFibrechannelStatusLinkDown INTEGER
  acFibrechannelStatusCustom INTEGER
  acFibrechannelStatusDescr DisplayString

AcFibrechannelAlarmsEntry  
SEQUENCE    
  acFibrechannelAlarmsIndex INTEGER
  acFibrechannelAlarmsLOS Counter64
  acFibrechannelAlarmsLinkDown Counter64

AcFibrechannelErrCounterEntry  
SEQUENCE    
  acFibrechannelErrCounterIndex INTEGER
  acFibrechannelErrCounterTotalFrame Counter64
  acFibrechannelErrCounterErroredFrame Counter64
  acFibrechannelErrCounterDiscardFrame Counter64
  acFibrechannelErrCounterLossofSync Counter64
  acFibrechannelErrCounterLineError Counter64
  acFibrechannelErrCounterFCSError Counter64
  acFibrechannelErrCounterCheckError Counter64

AcFibrechannelEtsCounterEntry  
SEQUENCE    
  acFibrechannelEtsCounterIndex INTEGER
  acFibrechannelEtsCounterTotalFrame Counter64
  acFibrechannelEtsCounterErroredFrame Counter64
  acFibrechannelEtsCounterDiscardFrame Counter64
  acFibrechannelEtsCounterLossofSync Counter64
  acFibrechannelEtsCounterLineError Counter64
  acFibrechannelEtsCounterFCSError Counter64
  acFibrechannelEtsCounterCheckError Counter64

Defined Values

atmedia 1.3.6.1.4.1.13458
OBJECT IDENTIFIER    

atmcrypt 1.3.6.1.4.1.13458.1
OBJECT IDENTIFIER    

acMachine 1.3.6.1.4.1.13458.1.1
OBJECT IDENTIFIER    

acSoftware 1.3.6.1.4.1.13458.1.2
OBJECT IDENTIFIER    

acHardware 1.3.6.1.4.1.13458.1.3
OBJECT IDENTIFIER    

acStatus 1.3.6.1.4.1.13458.1.4
OBJECT IDENTIFIER    

acMaintenance 1.3.6.1.4.1.13458.1.5
OBJECT IDENTIFIER    

acTransmission 1.3.6.1.4.1.13458.1.6
OBJECT IDENTIFIER    

acInterfaces 1.3.6.1.4.1.13458.1.3.3
OBJECT IDENTIFIER    

acEncryptors 1.3.6.1.4.1.13458.1.3.4
OBJECT IDENTIFIER    

acInterfaceStatus 1.3.6.1.4.1.13458.1.4.1
OBJECT IDENTIFIER    

acEncryptorStatus 1.3.6.1.4.1.13458.1.4.2
OBJECT IDENTIFIER    

acSonet 1.3.6.1.4.1.13458.1.6.1
OBJECT IDENTIFIER    

acE3 1.3.6.1.4.1.13458.1.6.2
OBJECT IDENTIFIER    

acE1 1.3.6.1.4.1.13458.1.6.3
OBJECT IDENTIFIER    

acGigabit 1.3.6.1.4.1.13458.1.6.4
OBJECT IDENTIFIER    

acFibrechannel 1.3.6.1.4.1.13458.1.6.5
OBJECT IDENTIFIER    

acSonetStatus 1.3.6.1.4.1.13458.1.6.1.1
OBJECT IDENTIFIER    

acSonetAlarms 1.3.6.1.4.1.13458.1.6.1.2
OBJECT IDENTIFIER    

acSonetErrCounter 1.3.6.1.4.1.13458.1.6.1.3
OBJECT IDENTIFIER    

acSonetEtsCounter 1.3.6.1.4.1.13458.1.6.1.4
OBJECT IDENTIFIER    

acE3Status 1.3.6.1.4.1.13458.1.6.2.1
OBJECT IDENTIFIER    

acE3Alarms 1.3.6.1.4.1.13458.1.6.2.2
OBJECT IDENTIFIER    

acE3ErrCounter 1.3.6.1.4.1.13458.1.6.2.3
OBJECT IDENTIFIER    

acE3EtsCounter 1.3.6.1.4.1.13458.1.6.2.4
OBJECT IDENTIFIER    

acE1Status 1.3.6.1.4.1.13458.1.6.3.1
OBJECT IDENTIFIER    

acE1Alarms 1.3.6.1.4.1.13458.1.6.3.2
OBJECT IDENTIFIER    

acE1ErrCounter 1.3.6.1.4.1.13458.1.6.3.3
OBJECT IDENTIFIER    

acE1EtsCounter 1.3.6.1.4.1.13458.1.6.3.4
OBJECT IDENTIFIER    

acGigabitStatus 1.3.6.1.4.1.13458.1.6.4.1
OBJECT IDENTIFIER    

acGigabitAlarms 1.3.6.1.4.1.13458.1.6.4.2
OBJECT IDENTIFIER    

acGigabitErrCounter 1.3.6.1.4.1.13458.1.6.4.3
OBJECT IDENTIFIER    

acGigabitEtsCounter 1.3.6.1.4.1.13458.1.6.4.4
OBJECT IDENTIFIER    

acFibrechannelStatus 1.3.6.1.4.1.13458.1.6.5.1
OBJECT IDENTIFIER    

acFibrechannelAlarms 1.3.6.1.4.1.13458.1.6.5.2
OBJECT IDENTIFIER    

acFibrechannelErrCounter 1.3.6.1.4.1.13458.1.6.5.3
OBJECT IDENTIFIER    

acFibrechannelEtsCounter 1.3.6.1.4.1.13458.1.6.5.4
OBJECT IDENTIFIER    

acProductID 1.3.6.1.4.1.13458.1.1.1
The product identifier of the ATMedia Encryptor device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acSerialNumber 1.3.6.1.4.1.13458.1.1.2
The serial number of the ATMedia Encryptor device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acHostname 1.3.6.1.4.1.13458.1.1.3
The actual host name of the ATMedia Encryptor device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acContact 1.3.6.1.4.1.13458.1.1.4
The contact person for ATMedia Encryptor administration.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acLocation 1.3.6.1.4.1.13458.1.1.5
The location of the ATMedia Encryptor device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acDescr 1.3.6.1.4.1.13458.1.1.6
The description of the ATMedia Encryptor device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acSoftVersion 1.3.6.1.4.1.13458.1.2.1
The software version running on the ATMedia Encryptor device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acSoftDescr 1.3.6.1.4.1.13458.1.2.2
Description of the ATMedia Encryptor software.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acHardVersion 1.3.6.1.4.1.13458.1.3.1
The hardware version of the ATMedia Encryptor device.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acHardDescr 1.3.6.1.4.1.13458.1.3.2
Description of the ATMedia Encryptor hardware.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acIfNumber 1.3.6.1.4.1.13458.1.3.3.1
The number of physical ATMedia Encryptor interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acIfTable 1.3.6.1.4.1.13458.1.3.3.2
A list of physical ATMedia Encryptor interfaces. The number of entries is given by the value of acsIfNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcIfEntry

acIfEntry 1.3.6.1.4.1.13458.1.3.3.2.1
An entry containing management information applicable to a particular physical interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcIfEntry  

acIfIndex 1.3.6.1.4.1.13458.1.3.3.2.1.1
A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acIfDescr 1.3.6.1.4.1.13458.1.3.3.2.1.2
Description of the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acIfPhyType 1.3.6.1.4.1.13458.1.3.3.2.1.3
Type of the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER other(0), sonet(1), e3(2), ds3(3), e1(4), ds1(5), gigabit(6), sonetlink(7), fibrechannel(8), ethernet(9)  

acIfSpeed 1.3.6.1.4.1.13458.1.3.3.2.1.4
Speed of the physical interface in bps.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

acIfRevision 1.3.6.1.4.1.13458.1.3.3.2.1.5
Revision of the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acEcNumber 1.3.6.1.4.1.13458.1.3.4.1
The number of ATMedia encryptor engines.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acEcTable 1.3.6.1.4.1.13458.1.3.4.2
A list of ATMedia encryptor engines. The number of entries is given by the value of acsEcNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcEcEntry

acEcEntry 1.3.6.1.4.1.13458.1.3.4.2.1
An entry containing management information applicable to a particular encryptor engine.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcEcEntry  

acEcIndex 1.3.6.1.4.1.13458.1.3.4.2.1.1
A unique value, greater than zero, for each encryptor engine. It is recommended that values are assigned contiguously starting from 1. The value for each encryptor must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acEcDescr 1.3.6.1.4.1.13458.1.3.4.2.1.2
Description of the encryptor engine.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acEcRevision 1.3.6.1.4.1.13458.1.3.4.2.1.3
Revision of the encryptor engine.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acInterfaceStatusNumber 1.3.6.1.4.1.13458.1.4.1.1
The number of ATMedia Encryptor physical interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acInterfaceStatusTable 1.3.6.1.4.1.13458.1.4.1.2
A list of interface cell counter informations. The number of entries is given by the value of acInferfaceStatusNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcInterfaceStatusEntry

acInterfaceStatusEntry 1.3.6.1.4.1.13458.1.4.1.2.1
An entry containing alarm informations applicable to a particular physical interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcInterfaceStatusEntry  

acInterfaceStatusIndex 1.3.6.1.4.1.13458.1.4.1.2.1.1
A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acInterfaceStatusState 1.3.6.1.4.1.13458.1.4.1.2.1.2
The current operational state of the interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

acInterfaceStatusLastChange 1.3.6.1.4.1.13458.1.4.1.2.1.3
The value of sysUpTime at the time the interface entered its current operational state.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

acInterfaceStatusDescr 1.3.6.1.4.1.13458.1.4.1.2.1.4
Description of the encryptor engine status.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acInterfaceStatusRxCells 1.3.6.1.4.1.13458.1.4.1.2.1.5
Number of cells received by the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acInterfaceStatusTxCells 1.3.6.1.4.1.13458.1.4.1.2.1.6
Number of cells sent by the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acInterfaceStatusRxBytes 1.3.6.1.4.1.13458.1.4.1.2.1.7
Number of bytes received by the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acInterfaceStatusTxBytes 1.3.6.1.4.1.13458.1.4.1.2.1.8
Number of bytes sent by the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acInterfaceStatusRxRate 1.3.6.1.4.1.13458.1.4.1.2.1.9
Data rate with which cells are received by the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

acInterfaceStatusTxRate 1.3.6.1.4.1.13458.1.4.1.2.1.10
Data rate with which cells are sent by the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

acEncryptorStatusNumber 1.3.6.1.4.1.13458.1.4.2.1
The number of ATMedia encryptor engines.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acEncryptorStatusTable 1.3.6.1.4.1.13458.1.4.2.2
A list of ATMedia encryptor engine status informations. The number of entries is given by the value of acsEcstatNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcEncryptorStatusEntry

acEncryptorStatusEntry 1.3.6.1.4.1.13458.1.4.2.2.1
An entry containing status information applicable to a particular encryptor engine.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcEncryptorStatusEntry  

acEncryptorStatusIndex 1.3.6.1.4.1.13458.1.4.2.2.1.1
A unique value, greater than zero, for each encryptor engine. It is recommended that values are assigned contiguously starting from 1. The value for each encryptor must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acEncryptorStatusState 1.3.6.1.4.1.13458.1.4.2.2.1.2
Status of the encryptor engine. Since version 2.1 all encryptors will distinguish between crypt (running) and plaintext mode
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), plain(3)  

acEncryptorStatusLastChange 1.3.6.1.4.1.13458.1.4.2.2.1.3
The value of sysUpTime at the time the encryptor entered its current operational state.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

acEncryptorStatusDescr 1.3.6.1.4.1.13458.1.4.2.2.1.4
Description of the encryptor engine status.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acMaUptime 1.3.6.1.4.1.13458.1.5.1
Hundredth of seconds since system start.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

acMaLastBoot 1.3.6.1.4.1.13458.1.5.2
Hundredth of seconds since last reboot.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

acMaSystime 1.3.6.1.4.1.13458.1.5.3
System Date/Time of ATMedia Encryptor device (UTC).
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

acMaTemperature 1.3.6.1.4.1.13458.1.5.4
Temperature of ATMedia Encryptor device in hundredth of degree celsius.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

acMaCpuTemperature1 1.3.6.1.4.1.13458.1.5.5
Temperature of the first CPU of the ATMedia Encryptor device in hundredth of degree celsius.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

acMaCpuTemperature2 1.3.6.1.4.1.13458.1.5.6
Temperature of the second CPU of the ATMedia Encryptor device in hundredth of degree celsius.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

acMaFanSpeed1 1.3.6.1.4.1.13458.1.5.7
Speed of the first fan of the ATMedia Encryptor device in rpm (revolutions per minute)
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

acMaFanSpeed2 1.3.6.1.4.1.13458.1.5.8
Speed of the second fan of the ATMedia Encryptor device in rpm (revolutions per minute)
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

acMaFanSpeed3 1.3.6.1.4.1.13458.1.5.9
Speed of the third fan of the ATMedia Encryptor device in rpm (revolutions per minute)
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

acMaFanSpeed4 1.3.6.1.4.1.13458.1.5.10
Speed of the fourth fan of the ATMedia Encryptor device in rpm (revolutions per minute)
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

acMaPowerState 1.3.6.1.4.1.13458.1.5.11
State of the power supply of the ATMedia Encryptor device
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), up(1), down(2)  

acMaPowerLastChange 1.3.6.1.4.1.13458.1.5.12
The value of sysUpTime at the time the power supply entered its current state.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

acSonetStatusNumber 1.3.6.1.4.1.13458.1.6.1.1.1
The number of physical Sonet interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acSonetStatusTable 1.3.6.1.4.1.13458.1.6.1.1.2
A list of physical Sonet interface status informations. The number of entries is given by the value of acsIfstatNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetStatusEntry

acSonetStatusEntry 1.3.6.1.4.1.13458.1.6.1.1.2.1
An entry containing status information applicable to a particular Sonet physical interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetStatusEntry  

acSonetStatusIndex 1.3.6.1.4.1.13458.1.6.1.1.2.1.1
A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acSonetStatusState 1.3.6.1.4.1.13458.1.6.1.1.2.1.2
Status of the physical Sonet interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), failure(3)  

acSonetStatusLOS 1.3.6.1.4.1.13458.1.6.1.1.2.1.3
Alarm condition of type LOS at the physical Sonet interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

acSonetStatusOOF 1.3.6.1.4.1.13458.1.6.1.1.2.1.4
Alarm condition of type OOF at the physical Sonet interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

acSonetStatusLOC 1.3.6.1.4.1.13458.1.6.1.1.2.1.5
Alarm condition of type LOC at the physical Sonet interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

acSonetStatusLineAIS 1.3.6.1.4.1.13458.1.6.1.1.2.1.6
Alarm condition of type LineAIS at the physical Sonet interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

acSonetStatusLineRDI 1.3.6.1.4.1.13458.1.6.1.1.2.1.7
Alarm condition of type LineRDI at the physical Sonet interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

acSonetStatusPathAIS 1.3.6.1.4.1.13458.1.6.1.1.2.1.8
Alarm condition of type PathAIS at the physical Sonet interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

acSonetStatusPathYellow 1.3.6.1.4.1.13458.1.6.1.1.2.1.9
Alarm condition of type PathYellow at the physical Sonet interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

acSonetStatusCustom 1.3.6.1.4.1.13458.1.6.1.1.2.1.10
Numerical status information of the physical Sonet interface. The AcSonetStatusCustom is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The various bit positions are: 0x0001 STATUS_LOS 0x0002 STATUS_LOP 0x0004 STATUS_LINE_AIS 0x0008 STATUS_PATH_AIS 0x0010 STATUS_PATH_YELLOW 0x0020 STATUS_STS_OOF 0x0040 STATUS_STS_LOF 0x0080 STATUS_STS_LOF23 0x0100 STATUS_LOC 0x0200 STATUS_LINE_FERF 0x1000 STATUS_PATH_FERF
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acSonetStatusDescr 1.3.6.1.4.1.13458.1.6.1.1.2.1.11
Textual description of the status of the physical Sonet interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acSonetAlarmsNumber 1.3.6.1.4.1.13458.1.6.1.2.1
The number of physical Sonet interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acSonetAlarmsTable 1.3.6.1.4.1.13458.1.6.1.2.2
A list of Sonet interface alarm informations. The number of entries is given by the value of acSonetAlarmsNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetAlarmsEntry

acSonetAlarmsEntry 1.3.6.1.4.1.13458.1.6.1.2.2.1
An entry containing alarm informations applicable to a particular physical Sonet interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetAlarmsEntry  

acSonetAlarmsIndex 1.3.6.1.4.1.13458.1.6.1.2.2.1.1
A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acSonetAlarmsLOS 1.3.6.1.4.1.13458.1.6.1.2.2.1.2
Number of alarm conditions of type LOS at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acSonetAlarmsLineAIS 1.3.6.1.4.1.13458.1.6.1.2.2.1.3
Number of alarm conditions of type LineAIS at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acSonetAlarmsLineRDI 1.3.6.1.4.1.13458.1.6.1.2.2.1.4
Number of alarm conditions of type LineRDI at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acSonetAlarmsPathAIS 1.3.6.1.4.1.13458.1.6.1.2.2.1.5
Number of alarm conditions of type PathAIS at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acSonetAlarmsPathYellow 1.3.6.1.4.1.13458.1.6.1.2.2.1.6
Number of alarm conditions of type PathYellow at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acSonetErrCounterNumber 1.3.6.1.4.1.13458.1.6.1.3.1
The number of physical Sonet interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acSonetErrCounterTable 1.3.6.1.4.1.13458.1.6.1.3.2
A list of Sonet interface alarm informations. The number of entries is given by the value of acSonetErrCounterNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetErrCounterEntry

acSonetErrCounterEntry 1.3.6.1.4.1.13458.1.6.1.3.2.1
An entry containing alarm informations applicable to a particular physical Sonet interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetErrCounterEntry  

acSonetErrCounterIndex 1.3.6.1.4.1.13458.1.6.1.3.2.1.1
A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acSonetErrCounterOOF 1.3.6.1.4.1.13458.1.6.1.3.2.1.2
Number of error conditions of type OOF at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acSonetErrCounterLOC 1.3.6.1.4.1.13458.1.6.1.3.2.1.3
Number of error conditions of type LOC at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acSonetErrCounterB1BIP 1.3.6.1.4.1.13458.1.6.1.3.2.1.4
Number of error conditions of type B1BIP at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acSonetErrCounterB2BIP 1.3.6.1.4.1.13458.1.6.1.3.2.1.5
Number of error conditions of type B2BIP at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acSonetErrCounterB3BIP 1.3.6.1.4.1.13458.1.6.1.3.2.1.6
Number of error conditions of type B3BIP at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acSonetErrCounterLineFEBE 1.3.6.1.4.1.13458.1.6.1.3.2.1.7
Number of error conditions of type LineFEBE at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acSonetErrCounterPathFEBE 1.3.6.1.4.1.13458.1.6.1.3.2.1.8
Number of error conditions of type PathFEBE at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acSonetErrCounterHEC 1.3.6.1.4.1.13458.1.6.1.3.2.1.9
Number of error conditions of type HEC at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acSonetEtsCounterNumber 1.3.6.1.4.1.13458.1.6.1.4.1
The number of physical Sonet interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acSonetEtsCounterTable 1.3.6.1.4.1.13458.1.6.1.4.2
A list of Sonet interface alarm informations. The number of entries is given by the value of acSonetEtsCounterNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSonetEtsCounterEntry

acSonetEtsCounterEntry 1.3.6.1.4.1.13458.1.6.1.4.2.1
An entry containing alarm informations applicable to a particular physical Sonet interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcSonetEtsCounterEntry  

acSonetEtsCounterIndex 1.3.6.1.4.1.13458.1.6.1.4.2.1.1
A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acSonetEtsCounterOOF 1.3.6.1.4.1.13458.1.6.1.4.2.1.2
Number of error conditions of type OOF at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acSonetEtsCounterLOC 1.3.6.1.4.1.13458.1.6.1.4.2.1.3
Number of error conditions of type LOC at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acSonetEtsCounterB1BIP 1.3.6.1.4.1.13458.1.6.1.4.2.1.4
Number of error conditions of type B1BIP at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acSonetEtsCounterB2BIP 1.3.6.1.4.1.13458.1.6.1.4.2.1.5
Number of error conditions of type B2BIP at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acSonetEtsCounterB3BIP 1.3.6.1.4.1.13458.1.6.1.4.2.1.6
Number of error conditions of type B3BIP at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acSonetEtsCounterLineFEBE 1.3.6.1.4.1.13458.1.6.1.4.2.1.7
Number of error conditions of type LineFEBE at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acSonetEtsCounterPathFEBE 1.3.6.1.4.1.13458.1.6.1.4.2.1.8
Number of error conditions of type PathFEBE at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acSonetEtsCounterHEC 1.3.6.1.4.1.13458.1.6.1.4.2.1.9
Number of error conditions of type HEC at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acE3StatusNumber 1.3.6.1.4.1.13458.1.6.2.1.1
The number of physical E3 interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acE3StatusTable 1.3.6.1.4.1.13458.1.6.2.1.2
A list of physical E3 interface status informations. The number of entries is given by the value of acE3StatusNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcE3StatusEntry

acE3StatusEntry 1.3.6.1.4.1.13458.1.6.2.1.2.1
An entry containing status information applicable to a particular E3 physical interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcE3StatusEntry  

acE3StatusIndex 1.3.6.1.4.1.13458.1.6.2.1.2.1.1
A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acE3StatusState 1.3.6.1.4.1.13458.1.6.2.1.2.1.2
Status of the physical E3 interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), failure(3)  

acE3StatusLOS 1.3.6.1.4.1.13458.1.6.2.1.2.1.3
Alarm condition of type LOS at the physical E3 interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

acE3StatusOOF 1.3.6.1.4.1.13458.1.6.2.1.2.1.4
Alarm condition of type OOF at the physical E3 interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

acE3StatusLOC 1.3.6.1.4.1.13458.1.6.2.1.2.1.5
Alarm condition of type LOC at the physical E3 interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

acE3StatusAIS 1.3.6.1.4.1.13458.1.6.2.1.2.1.6
Alarm condition of type AIS at the physical E3 interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

acE3StatusMAFERF 1.3.6.1.4.1.13458.1.6.2.1.2.1.7
Alarm condition of type MAFERF at the physical E3 interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

acE3StatusCustom 1.3.6.1.4.1.13458.1.6.2.1.2.1.8
Numerical status information of the physical E3 interface. The AcE3StatusCustom is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The various bit positions are: 0x0001 STATUS_LOS 0x0004 STATUS_E3_AIS 0x0020 STATUS_E3_OOF 0x0040 STATUS_E3_LOF 0x0080 STATUS_E3_LOF23 0x0100 STATUS_LOC 0x1000 STATUS_MA_FERF
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acE3StatusDescr 1.3.6.1.4.1.13458.1.6.2.1.2.1.9
Textual description of the status of the physical E3 interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acE3AlarmsNumber 1.3.6.1.4.1.13458.1.6.2.2.1
The number of physical E3 interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acE3AlarmsTable 1.3.6.1.4.1.13458.1.6.2.2.2
A list of E3 interface alarm informations. The number of entries is given by the value of acE3AlarmsNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcE3AlarmsEntry

acE3AlarmsEntry 1.3.6.1.4.1.13458.1.6.2.2.2.1
An entry containing alarm informations applicable to a particular physical E3 interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcE3AlarmsEntry  

acE3AlarmsIndex 1.3.6.1.4.1.13458.1.6.2.2.2.1.1
A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acE3AlarmsLOS 1.3.6.1.4.1.13458.1.6.2.2.2.1.2
Number of alarm conditions of type LOS at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acE3AlarmsAIS 1.3.6.1.4.1.13458.1.6.2.2.2.1.3
Number of alarm conditions of type AIS at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acE3AlarmsMAFERF 1.3.6.1.4.1.13458.1.6.2.2.2.1.4
Number of alarm conditions of type MAFERF at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acE3ErrCounterNumber 1.3.6.1.4.1.13458.1.6.2.3.1
The number of physical E3 interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acE3ErrCounterTable 1.3.6.1.4.1.13458.1.6.2.3.2
A list of E3 interface alarm informations. The number of entries is given by the value of acE3ErrCounterNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcE3ErrCounterEntry

acE3ErrCounterEntry 1.3.6.1.4.1.13458.1.6.2.3.2.1
An entry containing alarm informations applicable to a particular physical E3 interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcE3ErrCounterEntry  

acE3ErrCounterIndex 1.3.6.1.4.1.13458.1.6.2.3.2.1.1
A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acE3ErrCounterLCV 1.3.6.1.4.1.13458.1.6.2.3.2.1.2
Number of error conditions of type LCV at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acE3ErrCounterOOF 1.3.6.1.4.1.13458.1.6.2.3.2.1.3
Number of error conditions of type OOF at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acE3ErrCounterLOC 1.3.6.1.4.1.13458.1.6.2.3.2.1.4
Number of error conditions of type LOC at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acE3ErrCounterBIP 1.3.6.1.4.1.13458.1.6.2.3.2.1.5
Number of error conditions of type B1BIP at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acE3ErrCounterMAFEBE 1.3.6.1.4.1.13458.1.6.2.3.2.1.6
Number of error conditions of type MAFEBE at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acE3ErrCounterHEC 1.3.6.1.4.1.13458.1.6.2.3.2.1.7
Number of error conditions of type HEC at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acE3EtsCounterNumber 1.3.6.1.4.1.13458.1.6.2.4.1
The number of physical E3 interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acE3EtsCounterTable 1.3.6.1.4.1.13458.1.6.2.4.2
A list of E3 interface alarm informations. The number of entries is given by the value of acE3EtsCounterNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcE3EtsCounterEntry

acE3EtsCounterEntry 1.3.6.1.4.1.13458.1.6.2.4.2.1
An entry containing alarm informations applicable to a particular physical E3 interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcE3EtsCounterEntry  

acE3EtsCounterIndex 1.3.6.1.4.1.13458.1.6.2.4.2.1.1
A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acE3EtsCounterLCV 1.3.6.1.4.1.13458.1.6.2.4.2.1.2
Number of error conditions of type LCV at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acE3EtsCounterOOF 1.3.6.1.4.1.13458.1.6.2.4.2.1.3
Number of error conditions of type OOF at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acE3EtsCounterLOC 1.3.6.1.4.1.13458.1.6.2.4.2.1.4
Number of error conditions of type LOC at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acE3EtsCounterBIP 1.3.6.1.4.1.13458.1.6.2.4.2.1.5
Number of error conditions of type B1BIP at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acE3EtsCounterMAFEBE 1.3.6.1.4.1.13458.1.6.2.4.2.1.6
Number of error conditions of type MAFEBE at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acE3EtsCounterHEC 1.3.6.1.4.1.13458.1.6.2.4.2.1.7
Number of error conditions of type HEC at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acGigabitStatusNumber 1.3.6.1.4.1.13458.1.6.4.1.1
The number of physical Gigabit interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acGigabitStatusTable 1.3.6.1.4.1.13458.1.6.4.1.2
A list of physical Gigabit interface status informations. The number of entries is given by the value of acsGigabitStatusNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcGigabitStatusEntry

acGigabitStatusEntry 1.3.6.1.4.1.13458.1.6.4.1.2.1
An entry containing status information applicable to a particular Gigabit physical interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcGigabitStatusEntry  

acGigabitStatusIndex 1.3.6.1.4.1.13458.1.6.4.1.2.1.1
A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acGigabitStatusState 1.3.6.1.4.1.13458.1.6.4.1.2.1.2
Status of the physical Gigabit interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), failure(3)  

acGigabitStatusLOS 1.3.6.1.4.1.13458.1.6.4.1.2.1.3
Alarm condition of type LOS at the physical Gigabit interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

acGigabitStatusLossofSync 1.3.6.1.4.1.13458.1.6.4.1.2.1.4
Alarm condition of type LossofSync at the physical Gigabit interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

acGigabitStatusLinkDown 1.3.6.1.4.1.13458.1.6.4.1.2.1.5
Alarm condition of type LinkDown at the physical Gigabit interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

acGigabitStatusCustom 1.3.6.1.4.1.13458.1.6.4.1.2.1.6
Numerical status information of the physical Gigabit interface. The AcSonetStatusCustom is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The various bit positions are: 0x0001 STATUS_LOS 0x0002 STATUS_LossofSync 0x0004 STATUS_LinkDown
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acGigabitStatusDescr 1.3.6.1.4.1.13458.1.6.4.1.2.1.7
Textual description of the status of the physical Gigabit interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acGigabitAlarmsNumber 1.3.6.1.4.1.13458.1.6.4.2.1
The number of physical Gigabit interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acGigabitAlarmsTable 1.3.6.1.4.1.13458.1.6.4.2.2
A list of Gigabit interface alarm informations. The number of entries is given by the value of acGigabitAlarmsNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcGigabitAlarmsEntry

acGigabitAlarmsEntry 1.3.6.1.4.1.13458.1.6.4.2.2.1
An entry containing alarm informations applicable to a particular physical Gigabit interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcGigabitAlarmsEntry  

acGigabitAlarmsIndex 1.3.6.1.4.1.13458.1.6.4.2.2.1.1
A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acGigabitAlarmsLOS 1.3.6.1.4.1.13458.1.6.4.2.2.1.2
Number of alarm conditions of type LOS at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acGigabitAlarmsLinkDown 1.3.6.1.4.1.13458.1.6.4.2.2.1.3
Number of alarm conditions of type LinkDown at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acGigabitErrCounterNumber 1.3.6.1.4.1.13458.1.6.4.3.1
The number of physical Gigabit interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acGigabitErrCounterTable 1.3.6.1.4.1.13458.1.6.4.3.2
A list of Gigabit interface alarm informations. The number of entries is given by the value of acGigabitErrCounterNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcGigabitErrCounterEntry

acGigabitErrCounterEntry 1.3.6.1.4.1.13458.1.6.4.3.2.1
An entry containing alarm informations applicable to a particular physical Gigabit interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcGigabitErrCounterEntry  

acGigabitErrCounterIndex 1.3.6.1.4.1.13458.1.6.4.3.2.1.1
A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acGigabitErrCounterTotalFrame 1.3.6.1.4.1.13458.1.6.4.3.2.1.2
Number of total frames at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acGigabitErrCounterErroredFrame 1.3.6.1.4.1.13458.1.6.4.3.2.1.3
Number of errored frames at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acGigabitErrCounterFalseCarrier 1.3.6.1.4.1.13458.1.6.4.3.2.1.4
Number of error conditions of type FalseCarrier at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acGigabitErrCounterLossofSync 1.3.6.1.4.1.13458.1.6.4.3.2.1.5
Number of error conditions of type LossofSync at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acGigabitErrCounterLineError 1.3.6.1.4.1.13458.1.6.4.3.2.1.6
Number of error conditions of type LineError at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acGigabitEtsCounterNumber 1.3.6.1.4.1.13458.1.6.4.4.1
The number of physical Gigabit interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acGigabitEtsCounterTable 1.3.6.1.4.1.13458.1.6.4.4.2
A list of Gigabit interface alarm informations. The number of entries is given by the value of acGigabitEtsCounterNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcGigabitEtsCounterEntry

acGigabitEtsCounterEntry 1.3.6.1.4.1.13458.1.6.4.4.2.1
An entry containing alarm informations applicable to a particular physical Gigabit interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcGigabitEtsCounterEntry  

acGigabitEtsCounterIndex 1.3.6.1.4.1.13458.1.6.4.4.2.1.1
A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acGigabitEtsCounterTotalFrame 1.3.6.1.4.1.13458.1.6.4.4.2.1.2
not defined.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acGigabitEtsCounterErroredFrame 1.3.6.1.4.1.13458.1.6.4.4.2.1.3
Number of errored frames at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acGigabitEtsCounterFalseCarrier 1.3.6.1.4.1.13458.1.6.4.4.2.1.4
Number of error conditions of type FalseCarrier at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acGigabitEtsCounterLossofSync 1.3.6.1.4.1.13458.1.6.4.4.2.1.5
Number of error conditions of type LossofSync at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acGigabitEtsCounterLineError 1.3.6.1.4.1.13458.1.6.4.4.2.1.6
Number of error conditions of type LineError at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acFibrechannelStatusNumber 1.3.6.1.4.1.13458.1.6.5.1.1
The number of physical Fibrechannel interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acFibrechannelStatusTable 1.3.6.1.4.1.13458.1.6.5.1.2
A list of physical Fibrechannel interface status informations. The number of entries is given by the value of acsFibrechannelStatusNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcFibrechannelStatusEntry

acFibrechannelStatusEntry 1.3.6.1.4.1.13458.1.6.5.1.2.1
An entry containing status information applicable to a particular Fibrechannel physical interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcFibrechannelStatusEntry  

acFibrechannelStatusIndex 1.3.6.1.4.1.13458.1.6.5.1.2.1.1
A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acFibrechannelStatusState 1.3.6.1.4.1.13458.1.6.5.1.2.1.2
Status of the physical Fibrechannel interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), failure(3)  

acFibrechannelStatusLOS 1.3.6.1.4.1.13458.1.6.5.1.2.1.3
Alarm condition of type LOS at the physical Fibrechannel interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

acFibrechannelStatusLossofSync 1.3.6.1.4.1.13458.1.6.5.1.2.1.4
Alarm condition of type LossofSync at the physical Fibrechannel interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

acFibrechannelStatusLinkDown 1.3.6.1.4.1.13458.1.6.5.1.2.1.5
Alarm condition of type LinkDown at the physical Fibrechannel interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

acFibrechannelStatusCustom 1.3.6.1.4.1.13458.1.6.5.1.2.1.6
Numerical status information of the physical Fibrechannel interface. The AcSonetStatusCustom is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The various bit positions are: 0x0001 STATUS_LOS 0x0002 STATUS_LossofSync 0x0004 STATUS_LinkDown
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acFibrechannelStatusDescr 1.3.6.1.4.1.13458.1.6.5.1.2.1.7
Textual description of the status of the physical Fibrechannel interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

acFibrechannelAlarmsNumber 1.3.6.1.4.1.13458.1.6.5.2.1
The number of physical Fibrechannel interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acFibrechannelAlarmsTable 1.3.6.1.4.1.13458.1.6.5.2.2
A list of Fibrechannel interface alarm informations. The number of entries is given by the value of acFibrechannelAlarmsNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcFibrechannelAlarmsEntry

acFibrechannelAlarmsEntry 1.3.6.1.4.1.13458.1.6.5.2.2.1
An entry containing alarm informations applicable to a particular physical Fibrechannel interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcFibrechannelAlarmsEntry  

acFibrechannelAlarmsIndex 1.3.6.1.4.1.13458.1.6.5.2.2.1.1
A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acFibrechannelAlarmsLOS 1.3.6.1.4.1.13458.1.6.5.2.2.1.2
Number of alarm conditions of type LOS at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acFibrechannelAlarmsLinkDown 1.3.6.1.4.1.13458.1.6.5.2.2.1.3
Number of alarm conditions of type LinkDown at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acFibrechannelErrCounterNumber 1.3.6.1.4.1.13458.1.6.5.3.1
The number of physical Fibrechannel interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acFibrechannelErrCounterTable 1.3.6.1.4.1.13458.1.6.5.3.2
A list of Fibrechannel interface alarm informations. The number of entries is given by the value of acFibrechannelErrCounterNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcFibrechannelErrCounterEntry

acFibrechannelErrCounterEntry 1.3.6.1.4.1.13458.1.6.5.3.2.1
An entry containing alarm informations applicable to a particular physical Fibrechannel interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcFibrechannelErrCounterEntry  

acFibrechannelErrCounterIndex 1.3.6.1.4.1.13458.1.6.5.3.2.1.1
A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acFibrechannelErrCounterTotalFrame 1.3.6.1.4.1.13458.1.6.5.3.2.1.2
Number of total frames at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acFibrechannelErrCounterErroredFrame 1.3.6.1.4.1.13458.1.6.5.3.2.1.3
Number of errored frames at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acFibrechannelErrCounterDiscardFrame 1.3.6.1.4.1.13458.1.6.5.3.2.1.4
Number of discarded frames at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acFibrechannelErrCounterLossofSync 1.3.6.1.4.1.13458.1.6.5.3.2.1.5
Number of error conditions of type LossofSync at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acFibrechannelErrCounterLineError 1.3.6.1.4.1.13458.1.6.5.3.2.1.6
Number of error conditions of type LineError at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acFibrechannelErrCounterFCSError 1.3.6.1.4.1.13458.1.6.5.3.2.1.7
Number of error conditions of type FCSError at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acFibrechannelErrCounterCheckError 1.3.6.1.4.1.13458.1.6.5.3.2.1.8
Number of error conditions of type CheckError at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acFibrechannelEtsCounterNumber 1.3.6.1.4.1.13458.1.6.5.4.1
The number of physical Fibrechannel interfaces.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acFibrechannelEtsCounterTable 1.3.6.1.4.1.13458.1.6.5.4.2
A list of Fibrechannel interface alarm informations. The number of entries is given by the value of acFibrechannelEtsCounterNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcFibrechannelEtsCounterEntry

acFibrechannelEtsCounterEntry 1.3.6.1.4.1.13458.1.6.5.4.2.1
An entry containing alarm informations applicable to a particular physical Fibrechannel interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AcFibrechannelEtsCounterEntry  

acFibrechannelEtsCounterIndex 1.3.6.1.4.1.13458.1.6.5.4.2.1.1
A unique value, greater than zero, for each physical interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

acFibrechannelEtsCounterTotalFrame 1.3.6.1.4.1.13458.1.6.5.4.2.1.2
not defined.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acFibrechannelEtsCounterErroredFrame 1.3.6.1.4.1.13458.1.6.5.4.2.1.3
Number of errored frames at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acFibrechannelEtsCounterDiscardFrame 1.3.6.1.4.1.13458.1.6.5.4.2.1.4
Number of discarded frames at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acFibrechannelEtsCounterLossofSync 1.3.6.1.4.1.13458.1.6.5.4.2.1.5
Number of error conditions of type LossofSync at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acFibrechannelEtsCounterLineError 1.3.6.1.4.1.13458.1.6.5.4.2.1.6
Number of error conditions of type LineError at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acFibrechannelEtsCounterFCSError 1.3.6.1.4.1.13458.1.6.5.4.2.1.7
Number of error conditions of type FCSError at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

acFibrechannelEtsCounterCheckError 1.3.6.1.4.1.13458.1.6.5.4.2.1.8
Number of error conditions of type CheckError at the physical interface.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor