ATM-FORUM-ILMI40-MIB

File: ATM-FORUM-ILMI40-MIB.mib (86334 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1215
RFC-1212

Imported symbols

enterprises Counter IpAddress
DisplayString TRAP-TYPE OBJECT-TYPE

Defined Types

AtmAddress  
STRING Size(0..32)    

TruthValue  
INTEGER true(1), false(2)    

ClnpAddress  
STRING Size(1..21)    

AtmServiceCategory  
INTEGER other(1), cbr(2), rtVbr(3), nrtVbr(4), abr(5), ubr(6)    

AtmfPortEntry  
SEQUENCE    
  atmfPortIndex INTEGER
  atmfPortAddress AtmAddress
  atmfPortTransmissionType OBJECT IDENTIFIER
  atmfPortMediaType OBJECT IDENTIFIER
  atmfPortOperStatus INTEGER
  atmfPortSpecific OBJECT IDENTIFIER
  atmfPortMyIfName DisplayString
  atmfPortMyIfIdentifier INTEGER

AtmfAtmLayerEntry  
SEQUENCE    
  atmfAtmLayerIndex INTEGER
  atmfAtmLayerMaxVPCs INTEGER
  atmfAtmLayerMaxVCCs INTEGER
  atmfAtmLayerConfiguredVPCs INTEGER
  atmfAtmLayerConfiguredVCCs INTEGER
  atmfAtmLayerMaxVpiBits INTEGER
  atmfAtmLayerMaxVciBits INTEGER
  atmfAtmLayerUniType INTEGER
  atmfAtmLayerUniVersion INTEGER
  atmfAtmLayerDeviceType INTEGER
  atmfAtmLayerIlmiVersion INTEGER
  atmfAtmLayerNniSigVersion INTEGER
  atmfAtmLayerMaxSvpcVpi INTEGER
  atmfAtmLayerMaxSvccVpi INTEGER
  atmfAtmLayerMinSvccVci INTEGER

AtmfAtmStatsEntry  
SEQUENCE    
  atmfAtmStatsIndex INTEGER
  atmfAtmStatsReceivedCells Counter
  atmfAtmStatsDroppedReceivedCells Counter
  atmfAtmStatsTransmittedCells Counter

AtmfVpcEntry  
SEQUENCE    
  atmfVpcPortIndex INTEGER
  atmfVpcVpi INTEGER
  atmfVpcOperStatus INTEGER
  atmfVpcTransmitTrafficDescriptorType OBJECT IDENTIFIER
  atmfVpcTransmitTrafficDescriptorParam1 INTEGER
  atmfVpcTransmitTrafficDescriptorParam2 INTEGER
  atmfVpcTransmitTrafficDescriptorParam3 INTEGER
  atmfVpcTransmitTrafficDescriptorParam4 INTEGER
  atmfVpcTransmitTrafficDescriptorParam5 INTEGER
  atmfVpcReceiveTrafficDescriptorType OBJECT IDENTIFIER
  atmfVpcReceiveTrafficDescriptorParam1 INTEGER
  atmfVpcReceiveTrafficDescriptorParam2 INTEGER
  atmfVpcReceiveTrafficDescriptorParam3 INTEGER
  atmfVpcReceiveTrafficDescriptorParam4 INTEGER
  atmfVpcReceiveTrafficDescriptorParam5 INTEGER
  atmfVpcQoSCategory INTEGER
  atmfVpcTransmitQoSClass INTEGER
  atmfVpcReceiveQoSClass INTEGER
  atmfVpcBestEffortIndicator TruthValue
  atmfVpcServiceCategory AtmServiceCategory

AtmfVpcAbrEntry  
SEQUENCE    
  atmfVpcAbrPortIndex INTEGER
  atmfVpcAbrVpi INTEGER
  atmfVpcAbrTransmitIcr INTEGER
  atmfVpcAbrTransmitNrm INTEGER
  atmfVpcAbrTransmitTrm INTEGER
  atmfVpcAbrTransmitCdf INTEGER
  atmfVpcAbrTransmitRif INTEGER
  atmfVpcAbrTransmitRdf INTEGER
  atmfVpcAbrTransmitAdtf INTEGER
  atmfVpcAbrTransmitCrm INTEGER

AtmfVccEntry  
SEQUENCE    
  atmfVccPortIndex INTEGER
  atmfVccVpi INTEGER
  atmfVccVci INTEGER
  atmfVccOperStatus INTEGER
  atmfVccTransmitTrafficDescriptorType OBJECT IDENTIFIER
  atmfVccTransmitTrafficDescriptorParam1 INTEGER
  atmfVccTransmitTrafficDescriptorParam2 INTEGER
  atmfVccTransmitTrafficDescriptorParam3 INTEGER
  atmfVccTransmitTrafficDescriptorParam4 INTEGER
  atmfVccTransmitTrafficDescriptorParam5 INTEGER
  atmfVccReceiveTrafficDescriptorType OBJECT IDENTIFIER
  atmfVccReceiveTrafficDescriptorParam1 INTEGER
  atmfVccReceiveTrafficDescriptorParam2 INTEGER
  atmfVccReceiveTrafficDescriptorParam3 INTEGER
  atmfVccReceiveTrafficDescriptorParam4 INTEGER
  atmfVccReceiveTrafficDescriptorParam5 INTEGER
  atmfVccQoSCategory INTEGER
  atmfVccTransmitQoSClass INTEGER
  atmfVccReceiveQoSClass INTEGER
  atmfVccBestEffortIndicator TruthValue
  atmfVccTransmitFrameDiscard TruthValue
  atmfVccReceiveFrameDiscard TruthValue
  atmfVccServiceCategory AtmServiceCategory

AtmfVccAbrEntry  
SEQUENCE    
  atmfVccAbrPortIndex INTEGER
  atmfVccAbrVpi INTEGER
  atmfVccAbrVci INTEGER
  atmfVccAbrTransmitIcr INTEGER
  atmfVccAbrTransmitNrm INTEGER
  atmfVccAbrTransmitTrm INTEGER
  atmfVccAbrTransmitCdf INTEGER
  atmfVccAbrTransmitRif INTEGER
  atmfVccAbrTransmitRdf INTEGER
  atmfVccAbrTransmitAdtf INTEGER
  atmfVccAbrTransmitCrm INTEGER

AtmfAddressEntry  
SEQUENCE    
  atmfAddressPort INTEGER
  atmfAddressAtmAddress AtmAddress
  atmfAddressStatus INTEGER
  atmfAddressOrgScope INTEGER

AtmfAddressRegistrationAdminEntry  
SEQUENCE    
  atmfAddressRegistrationAdminIndex INTEGER
  atmfAddressRegistrationAdminStatus INTEGER

AtmfSrvcRegEntry  
SEQUENCE    
  atmfSrvcRegPort INTEGER
  atmfSrvcRegServiceID OBJECT IDENTIFIER
  atmfSrvcRegATMAddress AtmAddress
  atmfSrvcRegAddressIndex INTEGER
  atmfSrvcRegParm1 STRING

Defined Values

atmForum 2.1.353
OBJECT IDENTIFIER    

atmForumAdmin 2.1.353.1
OBJECT IDENTIFIER    

atmfTransmissionTypes 2.1.353.1.2
OBJECT IDENTIFIER    

atmfMediaTypes 2.1.353.1.3
OBJECT IDENTIFIER    

atmfTrafficDescrTypes 2.1.353.1.4
OBJECT IDENTIFIER    

atmfSrvcRegTypes 2.1.353.1.5
OBJECT IDENTIFIER    

atmForumUni 2.1.353.2
OBJECT IDENTIFIER    

atmfPhysicalGroup 2.1.353.2.1
OBJECT IDENTIFIER    

atmfAtmLayerGroup 2.1.353.2.2
OBJECT IDENTIFIER    

atmfAtmStatsGroup 2.1.353.2.3
OBJECT IDENTIFIER    

atmfVpcGroup 2.1.353.2.4
OBJECT IDENTIFIER    

atmfVccGroup 2.1.353.2.5
OBJECT IDENTIFIER    

atmfAddressGroup 2.1.353.2.6
OBJECT IDENTIFIER    

atmfNetPrefixGroup 2.1.353.2.7
OBJECT IDENTIFIER    

atmfSrvcRegistryGroup 2.1.353.2.8
OBJECT IDENTIFIER    

atmfVpcAbrGroup 2.1.353.2.9
OBJECT IDENTIFIER    

atmfVccAbrGroup 2.1.353.2.10
OBJECT IDENTIFIER    

atmfAddressRegistrationAdminGroup 2.1.353.2.11
OBJECT IDENTIFIER    

atmfUnknownType 2.1.353.1.2.1
OBJECT IDENTIFIER    

atmfSonetSTS3c 2.1.353.1.2.2
OBJECT IDENTIFIER    

atmfDs3 2.1.353.1.2.3
OBJECT IDENTIFIER    

atmf4B5B 2.1.353.1.2.4
OBJECT IDENTIFIER    

atmf8B10B 2.1.353.1.2.5
OBJECT IDENTIFIER    

atmfSonetSTS12c 2.1.353.1.2.6
OBJECT IDENTIFIER    

atmfE3 2.1.353.1.2.7
OBJECT IDENTIFIER    

atmfT1 2.1.353.1.2.8
OBJECT IDENTIFIER    

atmfE1 2.1.353.1.2.9
OBJECT IDENTIFIER    

atmfMediaUnknownType 2.1.353.1.3.1
OBJECT IDENTIFIER    

atmfMediaCoaxCable 2.1.353.1.3.2
OBJECT IDENTIFIER    

atmfMediaSingleMode 2.1.353.1.3.3
OBJECT IDENTIFIER    

atmfMediaMultiMode 2.1.353.1.3.4
OBJECT IDENTIFIER    

atmfMediaStp 2.1.353.1.3.5
OBJECT IDENTIFIER    

atmfMediaUtp 2.1.353.1.3.6
OBJECT IDENTIFIER    

atmfNoDescriptor 2.1.353.1.4.1
OBJECT IDENTIFIER    

atmfPeakRate 2.1.353.1.4.2
OBJECT IDENTIFIER    

atmfNoClpNoScr 2.1.353.1.4.3
OBJECT IDENTIFIER    

atmfClpNoTaggingNoScr 2.1.353.1.4.4
OBJECT IDENTIFIER    

atmfClpTaggingNoScr 2.1.353.1.4.5
OBJECT IDENTIFIER    

atmfNoClpScr 2.1.353.1.4.6
OBJECT IDENTIFIER    

atmfClpNoTaggingScr 2.1.353.1.4.7
OBJECT IDENTIFIER    

atmfClpTaggingScr 2.1.353.1.4.8
OBJECT IDENTIFIER    

atmfClpNoTaggingMcr 2.1.353.1.4.9
OBJECT IDENTIFIER    

atmfPortTable 2.1.353.2.1.1
A table of physical layer status and parameter information for the ATM Interface's physical interface.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmfPortEntry

atmfPortEntry 2.1.353.2.1.1.1
An entry in the table, containing information about the physical layer of an ATM Interface.
OBJECT-TYPE    
  AtmfPortEntry  

atmfPortIndex 2.1.353.2.1.1.1.1
The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfPortAddress 2.1.353.2.1.1.1.2
This object should not be implemented except as required for backward compatibility with version 2.0 of the UNI specification. The Address Group, defined in theAddress Registration MIB should be used instead.
OBJECT-TYPE    
  AtmAddress  

atmfPortTransmissionType 2.1.353.2.1.1.1.3
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. Appropriate Network Management MIBs should be used instead.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

atmfPortMediaType 2.1.353.2.1.1.1.4
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. Appropriate Network Management MIBs should be used instead.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

atmfPortOperStatus 2.1.353.2.1.1.1.5
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. Appropriate Network Management MIBs should be used instead.
OBJECT-TYPE    
  INTEGER other(1), inService(2), outOfService(3), loopBack(4)  

atmfPortSpecific 2.1.353.2.1.1.1.6
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification. Appropriate Network Management MIBs should be used instead.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

atmfPortMyIfName 2.1.353.2.1.1.1.7
A textual name of this interface. If this system is manageable through SNMP, and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. This interface must be uniquely named on this system to distinguish parallel links with a neighboring system. If this interface does not have a textual name, the value of this object is a zero length string.
OBJECT-TYPE    
  DisplayString  

atmfPortMyIfIdentifier 2.1.353.2.1.1.1.8
A unique value for each ATM interface. The scheme used to number the ATM interfaces on an ATM device is implementation specific. One way to generate this value is to use the ifIndex that an SNMP manager would use to identify the port. This interface must be uniquely numbered on this system to distinguish parallel links with a neighboring system.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfMyIpNmAddress 2.1.353.2.1.2
An IP Address to which a Network Management Station can send Network Management protocol messages, e.g. SNMP messages to UDP port 161, in order to access network management information concerning the operation of the ATM device local to this IME. If this object is supported, but the Network Management Agent has not been configured with an IP Address, the IME should return 0.0.0.0.
OBJECT-TYPE    
  IpAddress  

atmfMyOsiNmNsapAddress 2.1.353.2.1.3
An NSAP Address to which a Network Management Station can send Network Management protocol messages in order to access network management information concerning the operation of the ATM device local to this IME. If this object is supported, but the Network Management Agent has not been configured with an NSAP Address, the IME should return 0.0.0.0
OBJECT-TYPE    
  ClnpAddress  

atmfMySystemIdentifier 2.1.353.2.1.4
A 48 bit identifier, taken from the IEEE universally administered MAC address space, which uniquely identifies the ATM device local to this IME.
OBJECT-TYPE    
  STRING Size(6)  

atmfAtmLayerTable 2.1.353.2.2.1
A table of ATM layer status and parameter information for the ATM Interface.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmfAtmLayerEntry

atmfAtmLayerEntry 2.1.353.2.2.1.1
An entry in the table, containing information about the ATM layer of an ATM Interface.
OBJECT-TYPE    
  AtmfAtmLayerEntry  

atmfAtmLayerIndex 2.1.353.2.2.1.1.1
The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfAtmLayerMaxVPCs 2.1.353.2.2.1.1.2
The maximum number of switched and permanent VPCs supported on this ATM Interface. For virtual interfaces (i.e. Virtual Path Connections), the maximum number of VPCs PNNI may communicate over is set to zero.
OBJECT-TYPE    
  INTEGER 0..4096  

atmfAtmLayerMaxVCCs 2.1.353.2.2.1.1.3
The maximum number of switched and permanent VCCs supported on this ATM Interface.
OBJECT-TYPE    
  INTEGER 0..268435456  

atmfAtmLayerConfiguredVPCs 2.1.353.2.2.1.1.4
The number of permanent VPCs configured for use on this ATM Interface. For virtual interfaces (i.e. Virtual Path Connections used by PNNI), the maximum number of VPCs is set to zero.
OBJECT-TYPE    
  INTEGER 0..4096  

atmfAtmLayerConfiguredVCCs 2.1.353.2.2.1.1.5
The number of permanent VCCs configured for use on this ATM Interface.
OBJECT-TYPE    
  INTEGER 0..268435456  

atmfAtmLayerMaxVpiBits 2.1.353.2.2.1.1.6
The maximum number of active VPI bits on this ATM Interface. For virtual interfaces (i.e. Virtual Path Connections used by PNNI), this value has no meaning and is set to zero.
OBJECT-TYPE    
  INTEGER 0..12  

atmfAtmLayerMaxVciBits 2.1.353.2.2.1.1.7
The maximum number of active VCI bits on this ATM Interface.
OBJECT-TYPE    
  INTEGER 0..16  

atmfAtmLayerUniType 2.1.353.2.2.1.1.8
The type of the ATM device, either public or private.
OBJECT-TYPE    
  INTEGER public(1), private(2)  

atmfAtmLayerUniVersion 2.1.353.2.2.1.1.9
An indication of the latest version of the ATM Forum UNI Signalling Specification that is supported on this ATM Interface. If this value is not present, a version of the UNI earlier than 3.1 is supported. If the peer IME's value of this object is the same as, or later than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise, compatibility of the two IMEs cannot be assumed.
OBJECT-TYPE    
  INTEGER version2point0(1), version3point0(2), version3point1(3), version4point0(4), unsupported(5)  

atmfAtmLayerDeviceType 2.1.353.2.2.1.1.10
This object determines the type of the ATM device. This object is used in automatic ATM Interface-Type determination procedure such that a correct operational ATM Interface-type can be determined. An ATM End System shall take the value of user(1), and an ATM network node shall take the value of node(2).
OBJECT-TYPE    
  INTEGER user(1), node(2)  

atmfAtmLayerIlmiVersion 2.1.353.2.2.1.1.11
An indication of the latest version of the ATM Forum ILMI Specification that is supported on this ATM Interface. If the peer IME's value of this object is the same as, or later than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise, compatibility of the two IMEs cannot be assumed. If this object is not present, a version of the ILMI earlier than 4.0 is supported.
OBJECT-TYPE    
  INTEGER unsupported(1), version4point0(2)  

atmfAtmLayerNniSigVersion 2.1.353.2.2.1.1.12
An indication of the latest version of the ATM Forum PNNI Signalling Specification that is supported on this ATM Interface. Note that the PNNI routing version is not determined through ILMI. If the peer IME's value of this object is the same as, or later than the local IME's value, then the version corresponding to the local IME's value should be attempted. Otherwise, if the peer IME's value of this object is earlier, and supported locally, then the local IME should attempt the version corresponding to the peer IME's value. Otherwise, compatibility of the two IMEs cannot be assumed.
OBJECT-TYPE    
  INTEGER unsupported(1), iisp(2), pnniVersion1point0(3)  

atmfAtmLayerMaxSvpcVpi 2.1.353.2.2.1.1.13
The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual path connections.
OBJECT-TYPE    
  INTEGER 0..4096  

atmfAtmLayerMaxSvccVpi 2.1.353.2.2.1.1.14
The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual channel connections.
OBJECT-TYPE    
  INTEGER 0..4096  

atmfAtmLayerMinSvccVci 2.1.353.2.2.1.1.15
This is the minimum VCI value that the signalling stack is configured to support for allocation to switched virtual channel connections. The same value applies to all SVCC VPI values for which the signalling stack is configured.
OBJECT-TYPE    
  INTEGER 0..65536  

atmfAtmStatsTable 2.1.353.2.3.1
This group is deprecated and should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmfAtmStatsEntry

atmfAtmStatsEntry 2.1.353.2.3.1.1
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification.
OBJECT-TYPE    
  AtmfAtmStatsEntry  

atmfAtmStatsIndex 2.1.353.2.3.1.1.1
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfAtmStatsReceivedCells 2.1.353.2.3.1.1.2
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification.
OBJECT-TYPE    
  Counter  

atmfAtmStatsDroppedReceivedCells 2.1.353.2.3.1.1.3
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification.
OBJECT-TYPE    
  Counter  

atmfAtmStatsTransmittedCells 2.1.353.2.3.1.1.4
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification.
OBJECT-TYPE    
  Counter  

atmfVpcTable 2.1.353.2.4.1
A table of status and parameter information on the virtual path connections which cross this ATM Interface. There is one entry in this table for each permanent virtual path connection.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmfVpcEntry

atmfVpcEntry 2.1.353.2.4.1.1
An entry in the table, containing information about a particular virtual path connection.
OBJECT-TYPE    
  AtmfVpcEntry  

atmfVpcPortIndex 2.1.353.2.4.1.1.1
The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVpcVpi 2.1.353.2.4.1.1.2
The VPI value of this Virtual Path Connection at the local ATM Interface.
OBJECT-TYPE    
  INTEGER 0..4095  

atmfVpcOperStatus 2.1.353.2.4.1.1.3
The present actual operational status of the VPC. A value of end2endUp(2) or end2endDown(3) would be used if the end-to-end status is known. If only local status information is available, a value of localUpEnd2endUnknown(4) or localDown(5) would be used.
OBJECT-TYPE    
  INTEGER unknown(1), end2endUp(2), end2endDown(3), localUpEnd2endUnknown(4), localDown(5)  

atmfVpcTransmitTrafficDescriptorType 2.1.353.2.4.1.1.4
The type of traffic management, applicable to the transmit direction of this VPC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmfVpcTransmitTrafficDescriptorParam1, atmfVpcTransmitTrafficDescriptorParam2, atmfVpcTransmitTrafficDescriptorParam3, atmfVpcTransmitTrafficDescriptorParam4, and atmfVpcTransmitTrafficDescriptorParam5.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

atmfVpcTransmitTrafficDescriptorParam1 2.1.353.2.4.1.1.5
The first parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVpcTransmitTrafficDescriptorParam2 2.1.353.2.4.1.1.6
The second parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVpcTransmitTrafficDescriptorParam3 2.1.353.2.4.1.1.7
The third parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVpcTransmitTrafficDescriptorParam4 2.1.353.2.4.1.1.8
The fourth parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVpcTransmitTrafficDescriptorParam5 2.1.353.2.4.1.1.9
The fifth parameter of the transmit parameter vector for this VPC, used according to the value of atmfVpcTransmitTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVpcReceiveTrafficDescriptorType 2.1.353.2.4.1.1.10
The type of traffic management, applicable to the traffic in the receive direction of this VPC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmfVpcReceiveTrafficDescriptorParam1, atmfVpcReceiveTrafficDescriptorParam2, atmfVpcReceiveTrafficDescriptorParam3, atmfVpcReceiveTrafficDescriptorParam4, and atmfVpcReceiveTrafficDescriptorParam5.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

atmfVpcReceiveTrafficDescriptorParam1 2.1.353.2.4.1.1.11
The first parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVpcReceiveTrafficDescriptorParam2 2.1.353.2.4.1.1.12
The second parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVpcReceiveTrafficDescriptorParam3 2.1.353.2.4.1.1.13
The third parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVpcReceiveTrafficDescriptorParam4 2.1.353.2.4.1.1.14
The fourth parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVpcReceiveTrafficDescriptorParam5 2.1.353.2.4.1.1.15
The fifth parameter of the receive parameter vector for this VPC, used according to the value of atmfVpcReceiveTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVpcQoSCategory 2.1.353.2.4.1.1.16
This object should not be implemented except as required for backward compatibility with version 2.0 of the UNI specification.
OBJECT-TYPE    
  INTEGER other(1), deterministic(2), statistical(3), unspecified(4)  

atmfVpcTransmitQoSClass 2.1.353.2.4.1.1.17
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification.
OBJECT-TYPE    
  INTEGER 0..255  

atmfVpcReceiveQoSClass 2.1.353.2.4.1.1.18
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification.
OBJECT-TYPE    
  INTEGER 0..255  

atmfVpcBestEffortIndicator 2.1.353.2.4.1.1.19
The object is examined when atmfVpcTransmitTrafficDescriptorType or atmfVpcReceiveTrafficDescriptorType for the associated connection is equal to atmfNoClpNoScr. If this object is set to false(2), the network is requested to apply the CBR.1 conformance definition. If this object is set to true(1), the network is requested to apply the UBR.1 conformance definition.
OBJECT-TYPE    
  TruthValue  

atmfVpcServiceCategory 2.1.353.2.4.1.1.20
The service category of this virtual path connection.
OBJECT-TYPE    
  AtmServiceCategory  

atmfVpcAbrTable 2.1.353.2.9.1
A table of operational parameters related to the ABR virtual path connections which cross this ATM Interface. There is one entry in this table for each ABR virtual path connection. Each virtual path connection represented in this table must also be represented by an entry in the atmfVpcTable.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmfVpcAbrEntry

atmfVpcAbrEntry 2.1.353.2.9.1.1
An entry in the table, containing information about a particular ABR virtual path connection.
OBJECT-TYPE    
  AtmfVpcAbrEntry  

atmfVpcAbrPortIndex 2.1.353.2.9.1.1.1
The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVpcAbrVpi 2.1.353.2.9.1.1.2
The VPI value of this ABR Virtual Path Connection at the local ATM Interface.
OBJECT-TYPE    
  INTEGER 0..4095  

atmfVpcAbrTransmitIcr 2.1.353.2.9.1.1.3
Initial Cell Rate: This is the rate at which the source starts, both initially and after an idle period. The unit is cells per second. The value must not be larger than PCR, and is usually lower.
OBJECT-TYPE    
  INTEGER 0..16777215  

atmfVpcAbrTransmitNrm 2.1.353.2.9.1.1.4
The maximum number of data cells a source may send for each forward RM-cell. The default value is nrm32(5).
OBJECT-TYPE    
  INTEGER nrm2(1), nrm4(2), nrm8(3), nrm16(4), nrm32(5), nrm64(6), nrm128(7), nrm256(8)  

atmfVpcAbrTransmitTrm 2.1.353.2.9.1.1.5
Upper bound on the time between forward RM-cells for an active source (in milliseconds). The default value is trm100(8).
OBJECT-TYPE    
  INTEGER trm0point78125(1), trm1point5625(2), trm3point125(3), trm6point25(4), trm12point5(5), trm25(6), trm50(7), trm100(8)  

atmfVpcAbrTransmitCdf 2.1.353.2.9.1.1.6
Cutoff Decrease Factor: This field controls the rate decrease associated with lost or delayed backward RM cells. Larger values result in faster rate decrease. The default value is cdfOneOver16(4).
OBJECT-TYPE    
  INTEGER cdf0(1), cdfOneOver64(2), cdfOneOver32(3), cdfOneOver16(4), cdfOneOver8(5), cdfOneOver4(6), cdfOneOver2(7), cdfOne(8)  

atmfVpcAbrTransmitRif 2.1.353.2.9.1.1.7
Rate Increment Factor: Controls the rate at which the rate increases, when a backward RM-cell is received with CI=0 and NI=0. Larger values lead to faster rate increase. The default value is rifOneOver16(12).
OBJECT-TYPE    
  INTEGER rifOneOver32768(1), rifOneOver16384(2), rifOneOver8192(3), rifOneOver4096(4), rifOneOver2048(5), rifOneOver1024(6), rifOneOver512(7), rifOneOver256(8), rifOneOver128(9), rifOneOver64(10), rifOneOver32(11), rifOneOver16(12), rifOneOver8(13), rifOneOver4(14), rifOneOver2(15), rifOne(16)  

atmfVpcAbrTransmitRdf 2.1.353.2.9.1.1.8
Rate Decrease Factor: Controls the rate decrease which occurs when backward RM-cells with CI=1, are received. Larger values lead to faster rate decrease. The default value is rdfOneOver16(12).
OBJECT-TYPE    
  INTEGER rdfOneOver32768(1), rdfOneOver16384(2), rdfOneOver8192(3), rdfOneOver4096(4), rdfOneOver2048(5), rdfOneOver1024(6), rdfOneOver512(7), rdfOneOver256(8), rdfOneOver128(9), rdfOneOver64(10), rdfOneOver32(11), rdfOneOver16(12), rdfOneOver8(13), rdfOneOver4(14), rdfOneOver2(15), rdfOne(16)  

atmfVpcAbrTransmitAdtf 2.1.353.2.9.1.1.9
ACR Decrease Time Factor: Time permitted between sending RM-cells, before the allowed rate (ACR) is decreased to ICR. Range is 10 ms to 10.23 seconds. The unit is 10 milliseconds. For example, the default value of 50 corresponds to a time factor of 500 ms. Larger values allow a source to retain its current rate longer, during periods of relative inactivity. The default is 50 (0.5 seconds).
OBJECT-TYPE    
  INTEGER 1..1023  

atmfVpcAbrTransmitCrm 2.1.353.2.9.1.1.10
RM Cells Before Cutoff: Limits the number of forward RM-cells which may be sent in the absence of received backward RM-cells.
OBJECT-TYPE    
  INTEGER 0..8388608  

atmfVccTable 2.1.353.2.5.1
A table of status and parameter information on the virtual channel connections which are visible at this ATM Interface. There is one entry in this table for each permanent virtual channel connection, including reserved VCCs that are supported; e.g., signalling, OAM flows, and ILMI, but not unassigned cells.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmfVccEntry

atmfVccEntry 2.1.353.2.5.1.1
An entry in the table, containing information about a particular virtual channel connection.
OBJECT-TYPE    
  AtmfVccEntry  

atmfVccPortIndex 2.1.353.2.5.1.1.1
The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVccVpi 2.1.353.2.5.1.1.2
The VPI value of this Virtual Channel Connection at the local ATM Interface. For virtual interfaces (i.e. Virtual Path Connections), this value has no meaning and is set to zero
OBJECT-TYPE    
  INTEGER 0..4095  

atmfVccVci 2.1.353.2.5.1.1.3
The VCI value of this Virtual Channel Connection at the local ATM Interface.
OBJECT-TYPE    
  INTEGER 0..65535  

atmfVccOperStatus 2.1.353.2.5.1.1.4
The present actual operational status of the VCC. A value of end2endUp(2) or end2endUp(3) is used if the end to end status is known. If only local status is known a value of localUpEnd2endUnknown(4) or localDown(5) is used.
OBJECT-TYPE    
  INTEGER unknown(1), end2endUp(2), end2endDown(3), localUpEnd2endUnknown(4), localDown(5)  

atmfVccTransmitTrafficDescriptorType 2.1.353.2.5.1.1.5
The type of traffic management, applicable to the transmit direction of this VCC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmfVccTransmitTrafficDescriptorParam1, atmfVccTransmitTrafficDescriptorParam2, atmfVccTransmitTrafficDescriptorParam3, atmfVccTransmitTrafficDescriptorParam4, and atmfVccTransmitTrafficDescriptorParam5.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

atmfVccTransmitTrafficDescriptorParam1 2.1.353.2.5.1.1.6
The first parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVccTransmitTrafficDescriptorParam2 2.1.353.2.5.1.1.7
The second parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVccTransmitTrafficDescriptorParam3 2.1.353.2.5.1.1.8
The third parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVccTransmitTrafficDescriptorParam4 2.1.353.2.5.1.1.9
The fourth parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVccTransmitTrafficDescriptorParam5 2.1.353.2.5.1.1.10
The fifth parameter of the transmit parameter vector for this VCC, used according to the value of atmfVccTransmitTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVccReceiveTrafficDescriptorType 2.1.353.2.5.1.1.11
The type of traffic management, applicable to the traffic in the receive direction of this VCC. The type may indicate none, or a type with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of the objects: atmfVccReceiveTrafficDescriptorParam1, atmfVccReceiveTrafficDescriptorParam2, atmfVccReceiveTrafficDescriptorParam3, atmfVccReceiveTrafficDescriptorParam4, and atmfVccReceiveTrafficDescriptorParam5.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

atmfVccReceiveTrafficDescriptorParam1 2.1.353.2.5.1.1.12
The first parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVccReceiveTrafficDescriptorParam2 2.1.353.2.5.1.1.13
The second parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVccReceiveTrafficDescriptorParam3 2.1.353.2.5.1.1.14
The third parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVccReceiveTrafficDescriptorParam4 2.1.353.2.5.1.1.15
The fourth parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVccReceiveTrafficDescriptorParam5 2.1.353.2.5.1.1.16
The fifth parameter of the receive parameter vector for this VCC, used according to the value of atmfVccReceiveTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVccQoSCategory 2.1.353.2.5.1.1.17
This object should not be implemented except as required for backward compatibility with version 2.0 of the UNI specification.
OBJECT-TYPE    
  INTEGER other(1), deterministic(2), statistical(3), unspecified(4)  

atmfVccTransmitQoSClass 2.1.353.2.5.1.1.18
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification.
OBJECT-TYPE    
  INTEGER 0..255  

atmfVccReceiveQoSClass 2.1.353.2.5.1.1.19
This object should not be implemented except as required for backward compatibility with version 3.1 of the UNI specification.
OBJECT-TYPE    
  INTEGER 0..255  

atmfVccBestEffortIndicator 2.1.353.2.5.1.1.20
The object is examined when atmfVccTransmitTrafficDescriptorType or atmfVccReceiveTrafficDescriptorType for the associated connection is equal to atmfNoClpNoScr. If this object is set to false(2), the network is requested to apply the CBR.1 conformance definition. If this object is set to true(1), the network is requested to apply the UBR.1 conformance definition.
OBJECT-TYPE    
  TruthValue  

atmfVccTransmitFrameDiscard 2.1.353.2.5.1.1.21
If set to true(1), this object indicates that the network is requested to treat data for this connection (in the transmit direction) as frames (e.g. AAL5 CPCS_PDU's) rather than as individual cells. While the precise implementation is network-specific, this treatment may for example involve discarding entire frames during congestion, rather than a few cells from many frames. The default value is false(2).
OBJECT-TYPE    
  TruthValue  

atmfVccReceiveFrameDiscard 2.1.353.2.5.1.1.22
If set to true(1), this object indicates that the network is requested to treat data for this connection (in the receive direction) as frames (e.g. AAL5 CPCS_PDU's) rather than as individual cells. While the precise implementation is network-specific, this treatment may for example involve discarding entire frames during congestion, rather than a few cells from many frames. The default value is false(2).
OBJECT-TYPE    
  TruthValue  

atmfVccServiceCategory 2.1.353.2.5.1.1.23
The service category of this virtual channel connection.
OBJECT-TYPE    
  AtmServiceCategory  

atmfVccAbrTable 2.1.353.2.10.1
A table of operational parameters related to the ABR virtual channel connections which cross this ATM Interface. There is one entry in this table for each ABR virtual channel connection. Each virtual channel connection represented in this table must also be represented by an entry in the atmfVccTable.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmfVccAbrEntry

atmfVccAbrEntry 2.1.353.2.10.1.1
An entry in the table, containing information about a particular ABR virtual channel connection.
OBJECT-TYPE    
  AtmfVccAbrEntry  

atmfVccAbrPortIndex 2.1.353.2.10.1.1.1
The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfVccAbrVpi 2.1.353.2.10.1.1.2
The VPI value of this ABR Virtual Channel Connection at the local ATM Interface. For virtual interfaces (i.e. Virtual Path Connections), this value has no meaning and is set to zero
OBJECT-TYPE    
  INTEGER 0..4095  

atmfVccAbrVci 2.1.353.2.10.1.1.3
The VCI value of this ABR Virtual Channel Connection at the local ATM Interface.
OBJECT-TYPE    
  INTEGER 0..65535  

atmfVccAbrTransmitIcr 2.1.353.2.10.1.1.4
Initial Cell Rate: This is the rate at which the source starts, both initially and after an idle period. The unit is cells per second. The value must not be larger than PCR, and is usually lower.
OBJECT-TYPE    
  INTEGER 0..16777215  

atmfVccAbrTransmitNrm 2.1.353.2.10.1.1.5
The maximum number of data cells a source may send for each forward RM-cell. The default value is nrm32(5).
OBJECT-TYPE    
  INTEGER nrm2(1), nrm4(2), nrm8(3), nrm16(4), nrm32(5), nrm64(6), nrm128(7), nrm256(8)  

atmfVccAbrTransmitTrm 2.1.353.2.10.1.1.6
Upper bound on the time between forward RM-cells for an active source (in milliseconds). The default value is trm100(8).
OBJECT-TYPE    
  INTEGER trm0point78125(1), trm1point5625(2), trm3point125(3), trm6point25(4), trm12point5(5), trm25(6), trm50(7), trm100(8)  

atmfVccAbrTransmitCdf 2.1.353.2.10.1.1.7
Cutoff Decrease Factor: This field controls the rate decrease associated with lost or delayed backward RM cells. Larger values result in faster rate decrease. The default value is cdfOneOver16(4).
OBJECT-TYPE    
  INTEGER cdf0(1), cdfOneOver64(2), cdfOneOver32(3), cdfOneOver16(4), cdfOneOver8(5), cdfOneOver4(6), cdfOneOver2(7), cdfOne(8)  

atmfVccAbrTransmitRif 2.1.353.2.10.1.1.8
Rate Increment Factor: Controls the rate at which the rate increases, when a backward RM-cell is received with CI=0 and NI=0. Larger values lead to faster rate increase. The default value is rifOneOver16(12).
OBJECT-TYPE    
  INTEGER rifOneOver32768(1), rifOneOver16384(2), rifOneOver8192(3), rifOneOver4096(4), rifOneOver2048(5), rifOneOver1024(6), rifOneOver512(7), rifOneOver256(8), rifOneOver128(9), rifOneOver64(10), rifOneOver32(11), rifOneOver16(12), rifOneOver8(13), rifOneOver4(14), rifOneOver2(15), rifOne(16)  

atmfVccAbrTransmitRdf 2.1.353.2.10.1.1.9
Rate Decrease Factor: Controls the rate decrease which occurs when backward RM-cells with CI=1, are received. Larger values lead to faster rate decrease. The default value is rdfOneOver16(12).
OBJECT-TYPE    
  INTEGER rdfOneOver32768(1), rdfOneOver16384(2), rdfOneOver8192(3), rdfOneOver4096(4), rdfOneOver2048(5), rdfOneOver1024(6), rdfOneOver512(7), rdfOneOver256(8), rdfOneOver128(9), rdfOneOver64(10), rdfOneOver32(11), rdfOneOver16(12), rdfOneOver8(13), rdfOneOver4(14), rdfOneOver2(15), rdfOne(16)  

atmfVccAbrTransmitAdtf 2.1.353.2.10.1.1.10
ACR Decrease Time Factor: Time permitted between sending RM-cells, before the allowed rate (ACR) is decreased to ICR. Range is 10 ms to 10.23 seconds. The unit is 10 milliseconds. For example, the default value of 50 corresponds to a time factor of 500 ms. Larger values allow a source to retain its current rate longer, during periods of relative inactivity. The default is 50 (0.5 seconds).
OBJECT-TYPE    
  INTEGER 1..1023  

atmfVccAbrTransmitCrm 2.1.353.2.10.1.1.11
RM Cells Before Cutoff: Limits the number of forward RM-cells which may be sent in the absence of received backward RM-cells.
OBJECT-TYPE    
  INTEGER 0..8388608  

atmfAddressTable 2.1.353.2.6.1
A table implemented by the network-side IME, containing the ATM-layer addresses in effect on the user side of the UNI.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmfAddressEntry

atmfAddressEntry 2.1.353.2.6.1.1
Information about a single ATM-layer address in effect on the user-side IME. Note that the index variable atmAddressAtmAddress is a variable-length string, and as such the rule for variable-length strings in section 4.1.6 of RFC 1212 applies.
OBJECT-TYPE    
  AtmfAddressEntry  

atmfAddressPort 2.1.353.2.6.1.1.1
A unique value which identifies the UNI port for which the ATM address is in effect. The value of 0 has the special meaning of identifying the local UNI.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfAddressAtmAddress 2.1.353.2.6.1.1.2
The ATM address which is in effect on the user side of the ATM UNI port.
OBJECT-TYPE    
  AtmAddress  

atmfAddressStatus 2.1.353.2.6.1.1.3
An indication of the validity of the ATM address at the user side of the UNI port. To configure a new address in this table, the user-side IME must set the appropriate instance of this object to the value valid(1). To delete an existing address in this table, the user-side IME must set the appropriate instance of this object to the value invalid(2). If circumstances occur on the network-side IME which cause an address to become invalid, the network-side IME modifies the value of the appropriate instance of this object to invalid(2). Whenever the value of this object for a particular address becomes invalid(2), the conceptual row for that address may be removed from the table at any time, either immediately or subsequently.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

atmfAddressOrgScope 2.1.353.2.6.1.1.4
This object indicates the organizational scope for the referenced address. The information of the referenced address shall not be distributed outside the indicated scope. If the user-side IME does not specify a value for the atmfAddressOrgScope object, the network shall set the value of this object to localNetwork(1), if the registered address is an ATM group address, or to global(15), if the registered address is an individual address. Refer to Annex 6.0 of ATM Forum UNI Signalling 4.0 for guidelines regarding the use of organizational scopes. This organization hierarchy may be mapped to ATM network's routing hierarchy such as PNNI's routing level and the mapping shall be configurable in nodes. Use of this object in a public network is for further study. The default values for organizational scope are localNetwork(1) for ATM group addresses, and global(15) for individual addresses.
OBJECT-TYPE    
  INTEGER localNetwork(1), localNetworkPlusOne(2), localNetworkPlusTwo(3), siteMinusOne(4), intraSite(5), sitePlusOne(6), organizationMinusOne(7), intraOrganization(8), organizationPlusOne(9), communityMinusOne(10), intraCommunity(11), communityPlusOne(12), regional(13), interRegional(14), global(15)  

atmfAddressRegistrationAdminTable 2.1.353.2.11.1
A table of Address Registration administrative information for the ATM Interface.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmfAddressRegistrationAdminEntry

atmfAddressRegistrationAdminEntry 2.1.353.2.11.1.1
An entry in the table, containing Address Registration administrative information for the ATM Interface.
OBJECT-TYPE    
  AtmfAddressRegistrationAdminEntry  

atmfAddressRegistrationAdminIndex 2.1.353.2.11.1.1.1
The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfAddressRegistrationAdminStatus 2.1.353.2.11.1.1.2
An indication of whether or not Address Registration is supported on this ATM Interface. Supported(1) indicates that this ATM Interface supports address registration. Unsupported(2) indicates that this ATM Interface does not support address registration.
OBJECT-TYPE    
  INTEGER supported(1), unsupported(2)  

atmfSrvcRegLecs 2.1.353.1.5.1
OBJECT IDENTIFIER    

atmfSrvcRegAns 2.1.353.1.5.2
OBJECT IDENTIFIER    

atmfSrvcRegTable 2.1.353.2.8.1
The table implemented by the IME on the network side of the ATM UNI port contains all of the services that are available to the user-side IME indexed by service identifier.
OBJECT-TYPE    
  SEQUENCE OF  
    AtmfSrvcRegEntry

atmfSrvcRegEntry 2.1.353.2.8.1.1
Information about a single service provider that is available to the user-side IME.
OBJECT-TYPE    
  AtmfSrvcRegEntry  

atmfSrvcRegPort 2.1.353.2.8.1.1.1
The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmfSrvcRegServiceID 2.1.353.2.8.1.1.2
This is the service identifier which uniquely identifies the type of service at the address provided in the table.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

atmfSrvcRegATMAddress 2.1.353.2.8.1.1.3
This is the full address of the service. The user-side IME may use this address to establish a connection with the service.
OBJECT-TYPE    
  AtmAddress  

atmfSrvcRegAddressIndex 2.1.353.2.8.1.1.4
An arbitrary integer to differentiate multiple rows containing different ATM addresses for the same service on the same port.
OBJECT-TYPE    
  INTEGER 1..2147483647  

atmfSrvcRegParm1 2.1.353.2.8.1.1.5
An octet string whose size and meaning is determined by the value of atmfSrvcRegServiceID.
OBJECT-TYPE    
  STRING Size(1..255)