ATM-ACCOUNTING-INFORMATION-MIB

File: ATM-ACCOUNTING-INFORMATION-MIB.mib (17833 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE OBJECT-IDENTITY
Integer32 Counter64 DisplayString
DateAndTime TEXTUAL-CONVENTION ciscoExperiment

Defined Types

AtmAddr  
The ATM address used by the network entity. The address types are: no address (0 octets), E.164 (8 octets), and NSAP (20 octets). Note: The E.164 address is encoded in BCD format.
TEXTUAL-CONVENTION    
  OCTET STRING Size(0|8|20)  

Defined Values

atmAccountingInformationMIB 1.3.6.1.4.1.9.10.18
The MIB module for identifying items of accounting information which are applicable to ATM connections.
MODULE-IDENTITY    

atmAcctngMIBObjects 1.3.6.1.4.1.9.10.18.1
OBJECT IDENTIFIER    

atmAcctngDataObjects 1.3.6.1.4.1.9.10.18.1.1
This identifier defines a subtree under which various objects are defined such that a set of objects to be collected as ATM accounting data can be specified as a (subtree, list) tuple using this identifier as the subtree.
OBJECT-IDENTITY    

atmAcctngConnectionType 1.3.6.1.4.1.9.10.18.1.1.1
The type of connection.
OBJECT-TYPE    
  INTEGER pvc(1), pvp(2), svcIncoming(3), svcOutgoing(4), svpIncoming(5), svpOutgoing(6), spvcInitiator(7), spvcTarget(8), spvpInitiator(9), spvpTarget(10)  

atmAcctngCastType 1.3.6.1.4.1.9.10.18.1.1.2
An indication of whether the connection is point-to-point or point-to-multipoint.
OBJECT-TYPE    
  INTEGER p2p(1), p2mp(2)  

atmAcctngIfName 1.3.6.1.4.1.9.10.18.1.1.3
A textual name for the interface on which the data for the connection was collected. If the local SNMP agent supports the object ifName, the value of this object must be identical that of ifName in the conceptual row of the ifTable corresponding to this interface.
OBJECT-TYPE    
  DisplayString  

atmAcctngIfAlias 1.3.6.1.4.1.9.10.18.1.1.4
The 'alias' name for the interface as specified by a network manager, e.g., via a management set operation to modify the relevant instance of the ifAlias object. Note that in contrast to ifIndex, ifAlias provides a non-volatile 'handle' for the interface, the value of which is retained across agent reboots.
OBJECT-TYPE    
  DisplayString  

atmAcctngVpi 1.3.6.1.4.1.9.10.18.1.1.5
The VPI used for the connection.
OBJECT-TYPE    
  INTEGER 0..4095  

atmAcctngVci 1.3.6.1.4.1.9.10.18.1.1.6
The VCI used for the connection.
OBJECT-TYPE    
  INTEGER 0..65535  

atmAcctngCallingParty 1.3.6.1.4.1.9.10.18.1.1.7
The connection's calling party. If unknown (e.g., for a PVC), then the value of this object is the zero-length string.
OBJECT-TYPE    
  AtmAddr  

atmAcctngCalledParty 1.3.6.1.4.1.9.10.18.1.1.8
The connection's called party. If unknown (e.g., for a PVC), then the value of this object is the zero-length string.
OBJECT-TYPE    
  AtmAddr  

atmAcctngCallReference 1.3.6.1.4.1.9.10.18.1.1.9
The connection's call reference value (e.g., from Q.2931). If unknown (e.g., for a PVC), then the value of this object is the zero-length string.
OBJECT-TYPE    
  OCTET STRING Size(0..3)  

atmAcctngStartTime 1.3.6.1.4.1.9.10.18.1.1.10
The time when the connection was established.
OBJECT-TYPE    
  DateAndTime  

atmAcctngCollectionTime 1.3.6.1.4.1.9.10.18.1.1.11
The time at which the data in this record was collected.
OBJECT-TYPE    
  DateAndTime  

atmAcctngCollectMode 1.3.6.1.4.1.9.10.18.1.1.12
The reason why this connection data was collected.
OBJECT-TYPE    
  INTEGER onRelease(1), periodically(2), onCommand(3)  

atmAcctngReleaseCause 1.3.6.1.4.1.9.10.18.1.1.13
If the connection data was collected because of the release of an SVC, then this is the cause code in the Release message for the connection; otherwise, this object has the value zero.
OBJECT-TYPE    
  Integer32  

atmAcctngServiceCategory 1.3.6.1.4.1.9.10.18.1.1.14
The connection's service category.
OBJECT-TYPE    
  INTEGER other(1), cbr(2), vbrRt(3), vbrNrt(4), abr(5), ubr(6), unknown(7)  

atmAcctngTransmittedCells 1.3.6.1.4.1.9.10.18.1.1.15
The number of cells, including OAM cells, transmitted by this switch on this connection.
OBJECT-TYPE    
  Counter64  

atmAcctngTransmittedClp0Cells 1.3.6.1.4.1.9.10.18.1.1.16
The number of cells with CLP=0, including OAM cells, transmitted by this switch on this connection.
OBJECT-TYPE    
  Counter64  

atmAcctngReceivedCells 1.3.6.1.4.1.9.10.18.1.1.17
The number of cells, including OAM cells, received by this switch on this connection.
OBJECT-TYPE    
  Counter64  

atmAcctngReceivedClp0Cells 1.3.6.1.4.1.9.10.18.1.1.18
The number of cells with CLP=0, including OAM cells, received by this switch on this connection.
OBJECT-TYPE    
  Counter64  

atmAcctngTransmitTrafficDescriptorType 1.3.6.1.4.1.9.10.18.1.1.19
The traffic descriptor type (as defined in RFC 1695 and its successors) in the direction in which the switch transmits cells on the connection.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

atmAcctngTransmitTrafficDescriptorParam1 1.3.6.1.4.1.9.10.18.1.1.20
The first traffic descriptor parameter in the direction in which this switch transmits cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngTransmitTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmAcctngTransmitTrafficDescriptorParam2 1.3.6.1.4.1.9.10.18.1.1.21
The second traffic descriptor parameter in the direction in which this switch transmits cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngTransmitTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmAcctngTransmitTrafficDescriptorParam3 1.3.6.1.4.1.9.10.18.1.1.22
The third traffic descriptor parameter in the direction in which this switch transmits cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngTransmitTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmAcctngTransmitTrafficDescriptorParam4 1.3.6.1.4.1.9.10.18.1.1.23
The fourth traffic descriptor parameter in the direction in which this switch transmits cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngTransmitTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmAcctngTransmitTrafficDescriptorParam5 1.3.6.1.4.1.9.10.18.1.1.24
The fifth traffic descriptor parameter in the direction in which this switch transmits cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngTransmitTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmAcctngReceiveTrafficDescriptorType 1.3.6.1.4.1.9.10.18.1.1.25
The traffic descriptor type (as defined in RFC 1695 and its successors) in the direction in which this switch receives cells on this connection.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

atmAcctngReceiveTrafficDescriptorParam1 1.3.6.1.4.1.9.10.18.1.1.26
The first traffic descriptor parameter in the direction in which this switch receives cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngReceiveTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmAcctngReceiveTrafficDescriptorParam2 1.3.6.1.4.1.9.10.18.1.1.27
The second traffic descriptor parameter in the direction in which this switch receives cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngReceiveTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmAcctngReceiveTrafficDescriptorParam3 1.3.6.1.4.1.9.10.18.1.1.28
The third traffic descriptor parameter in the direction in which this switch receives cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngReceiveTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmAcctngReceiveTrafficDescriptorParam4 1.3.6.1.4.1.9.10.18.1.1.29
The fourth traffic descriptor parameter in the direction in which this switch receives cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngReceiveTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmAcctngReceiveTrafficDescriptorParam5 1.3.6.1.4.1.9.10.18.1.1.30
The fifth traffic descriptor parameter in the direction in which this switch receives cells on this connection. Interpretation of this parameter is dependent on the value of atmAcctngReceiveTrafficDescriptorType.
OBJECT-TYPE    
  INTEGER 0..2147483647  

atmAcctngCallingPartySubAddress 1.3.6.1.4.1.9.10.18.1.1.31
The connection's calling party sub-address. If the connection has no calling party sub-address, or it's value is unknown, then the value of this object is the zero-length string.
OBJECT-TYPE    
  AtmAddr  

atmAcctngCalledPartySubAddress 1.3.6.1.4.1.9.10.18.1.1.32
The connection's called party sub-address. If the connection has no called party sub-address, or it's value is unknown, then the value of this object is the zero-length string.
OBJECT-TYPE    
  AtmAddr  

atmAcctngRecordCrc16 1.3.6.1.4.1.9.10.18.1.1.33
The value of the CRC-16 checksum (as defined by ISO 3309 (HDLC) and/or ITU X.25) calculated over the accounting record containing this object. While the mechanism for calculating/encoding the checksum value is specific to the method of encoding the accounting record, an accounting record containing this object is typically generated by initializing the value of this object to the all-zeros string ('0000'H), with the location of these zeros being saved. After generating the record, the checksum is calculated over the whole connection record and then the all-zeros value is overwritten (at the saved location) by the calculated value of the checksum.
OBJECT-TYPE    
  OCTET STRING Size(2)  

atmAcctngTransmittedPeakCells 1.3.6.1.4.1.9.10.18.1.1.34
The number of cells transmitted on the connection within the peak 5-second sub-interval, where the peak sub-interval is the one having the highest value of any sub-interval in the current/completing accounting period. One accounting period ends and the next starts at the time of each 'periodic' collection of accounting information. A value of '-1' indicates that no peak value is available.
OBJECT-TYPE    
  Integer32  

atmAcctngReceivedPeakCells 1.3.6.1.4.1.9.10.18.1.1.35
The number of cells received on the connection within the peak 5-second sub-interval, where the peak sub-interval is the one having the highest value of any sub-interval in the current/completing accounting period. One accounting period ends and the next starts at the time of each 'periodic' collection of accounting information. A value of '-1' indicates that no peak value is available.
OBJECT-TYPE    
  Integer32