ASSETMANAGEMENT-MIB

File: ASSETMANAGEMENT-MIB.mib (71130 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-CONF	SNMPv2-TC
INET-ADDRESS-MIB	RFC1213-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
enterprises	Integer32	Unsigned32
MODULE-COMPLIANCE	OBJECT-GROUP	NOTIFICATION-GROUP
TEXTUAL-CONVENTION	DisplayString	TruthValue
InetAddressType	InetAddress	InetPortNumber
sysContact	sysName	sysLocation

Defined Types

AssetManagementLEDModeEnumeration
The mode of an LED for the asset manager.
TEXTUAL-CONVENTION
	INTEGER	on(1), off(2), fastBlink(3), slowBlink(4)

AssetManagementLEDOperationModeEnumeration
The operation mode of an LED for the asset manager.
TEXTUAL-CONVENTION
	INTEGER	manual(1), automatic(2)

AssetStripStateEnumeration
The state of an asset strip.
TEXTUAL-CONVENTION
	INTEGER	disconnected(1), firmwareUpdate(2), unsupported(3), available(4)

AssetStripFirmwareUpdateStateEnumeration
The state of an asset strip firmware update.
TEXTUAL-CONVENTION
	INTEGER	started(1), successful(2), failed(3)

RackUnitTypeEnumeration
Type of an asset tag.
TEXTUAL-CONVENTION
	INTEGER	single(1), blade(2), none(30), unknown(31)

RGBCOLOR
An RGB color value.
TEXTUAL-CONVENTION
	OCTET STRING	Size(3)

RackUnitNumberingModeEnumeration
The configurable parameters.
TEXTUAL-CONVENTION
	INTEGER	topDown(0), bottomUp(1)

AssetStripOrientationEnumeration
The configurable parameters.
TEXTUAL-CONVENTION
	INTEGER	topConnector(0), bottomConnector(1)

DeviceConfigurationParameterEnumeration
The configurable parameters.
TEXTUAL-CONVENTION
	INTEGER	defaultLEDColorConnected(0), defaultLEDColorDisconnected(1), rackUnitCount(2), assetStripName(3), assetStripRackUnitNumberingMode(4), assetStripRackUnitNumberingOffset(5), assetStripOrientation(6)

AssetStripTypeEnumeration
The asset strip types.
TEXTUAL-CONVENTION
	INTEGER	simple(0), composite(1)

LogEventTypeEnumeration
The type of a log event.
TEXTUAL-CONVENTION
	INTEGER	empty(0), assetTagConnected(1), assetTagDisconnected(2), assetStripStateChange(3)

AssetStripConfigurationEntryStruct
SEQUENCE
	assetStripID	Integer32
	rackUnitCount	Integer32
	assetStripState	AssetStripStateEnumeration
	assetStripName	DisplayString
	rackUnitNumberingMode	RackUnitNumberingModeEnumeration
	rackUnitNumberingOffset	Integer32
	assetStripOrientation	AssetStripOrientationEnumeration
	currentMainTagCount	Integer32
	currentBladeTagCount	Integer32
	maxMainTagCount	Integer32
	maxBladeTagCount	Integer32
	bladeExtensionOverflow	TruthValue
	assetStripType	AssetStripTypeEnumeration
	numberOfComponentAssetStrips	Integer32
	assetStripDefaultLEDColorConnected	RGBCOLOR
	assetStripDefaultLEDColorConnectedStr	DisplayString
	assetStripDefaultLEDColorDisconnected	RGBCOLOR
	assetStripDefaultLEDColorDisconnectedStr	DisplayString

AssetManagementEntryStruct
SEQUENCE
	rackUnitID	Integer32
	ledOperationMode	AssetManagementLEDOperationModeEnumeration
	ledMode	AssetManagementLEDModeEnumeration
	ledColor	RGBCOLOR
	ledColorStr	DisplayString
	tagID	DisplayString
	tagFamily	DisplayString
	rackUnitPosition	Integer32
	rackUnitType	RackUnitTypeEnumeration
	bladeExtensionSize	Integer32
	rackUnitName	DisplayString
	assetStripCascadePosition	Integer32
	rackUnitRelativePosition	Integer32
	assetStripNumberOfRackUnits	Integer32

BladeExtensionEntryStruct
SEQUENCE
	bladeSlotID	Integer32
	bladeTagID	DisplayString
	bladeSlotPosition	Integer32

AssetManagementLogEntryStruct
SEQUENCE
	logIndex	Integer32
	logTimeStamp	Unsigned32
	logEventType	LogEventTypeEnumeration
	logAssetStripNumber	Integer32
	logRackUnitNumber	Integer32
	logRackUnitPosition	Integer32
	logSlotNumber	Integer32
	logTagID	DisplayString
	logAssetStripState	AssetStripStateEnumeration
	logParentBladeID	DisplayString

Defined Values

raritan		1.3.6.1.4.1.13742
This MIB describes the SNMP functions of the asset management capable products from Raritan Computer.
MODULE-IDENTITY

assetManager		1.3.6.1.4.1.13742.7
OBJECT IDENTIFIER

traps		1.3.6.1.4.1.13742.7.0
OBJECT IDENTIFIER

trapInformation		1.3.6.1.4.1.13742.7.0.0
OBJECT IDENTIFIER

configuration		1.3.6.1.4.1.13742.7.1
OBJECT IDENTIFIER

conformance		1.3.6.1.4.1.13742.7.2
OBJECT IDENTIFIER

log		1.3.6.1.4.1.13742.7.3
OBJECT IDENTIFIER

assetStrip		1.3.6.1.4.1.13742.7.1.6
OBJECT IDENTIFIER

assetManagement		1.3.6.1.4.1.13742.7.1.7
OBJECT IDENTIFIER

compliances		1.3.6.1.4.1.13742.7.2.1
OBJECT IDENTIFIER

groups		1.3.6.1.4.1.13742.7.2.2
OBJECT IDENTIFIER

complianceRev1		1.3.6.1.4.1.13742.7.2.1.1
The requirements for conformance to the ASSETMANAGEMENT-MIB. This is deprecated in favor of complianceRev2
Status: deprecated	Access: read-write
MODULE-COMPLIANCE

complianceRev2		1.3.6.1.4.1.13742.7.2.1.2
The requirements for conformance to the ASSETMANAGEMENT-MIB.
Status: current	Access: read-write
MODULE-COMPLIANCE

configGroup		1.3.6.1.4.1.13742.7.2.2.1
A collection of objects representing configuration data.
Status: deprecated	Access: read-write
OBJECT-GROUP

configGroup2		1.3.6.1.4.1.13742.7.2.2.5
A collection of objects representing configuration data.
Status: current	Access: read-write
OBJECT-GROUP

assetManagementGroup		1.3.6.1.4.1.13742.7.2.2.2
A collection of objects providing the ability to control the asset management strip.
Status: current	Access: read-write
OBJECT-GROUP

trapsGroup		1.3.6.1.4.1.13742.7.2.2.3
A collection of traps.
Status: current	Access: read-write
NOTIFICATION-GROUP

trapInformationGroup		1.3.6.1.4.1.13742.7.2.2.4
A collection of objects providing information in the traps.
Status: current	Access: read-write
OBJECT-GROUP

logGroup		1.3.6.1.4.1.13742.7.2.2.6
A collection of objects representing log data.
Status: current	Access: read-write
OBJECT-GROUP

assetStripCount		1.3.6.1.4.1.13742.7.1.1
The number of asset management strip units supported.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..255

defaultLEDColorConnected		1.3.6.1.4.1.13742.7.1.2
Default color of all LEDs (RGB) when a tag is connected during automatic operation; in binary format. This is deprecated in favor of assetStripDefaultLEDColorConnected For SET operations, the value will be applied to all asset strips For GET operations, the value returned will be the value corresponding to asset strip 1
Status: deprecated	Access: read-write
OBJECT-TYPE
	RGBCOLOR

defaultLEDColorConnectedStr		1.3.6.1.4.1.13742.7.1.3
Default color of all LEDs (RGB) when a tag is connected during automatic operation; string with 3 hex octets This is deprecated in favor of assetStripDefaultLEDColorConnectedStr For SET operations, the value will be applied to all asset strips For GET operations, the value returned will be the value corresponding to asset strip 1
Status: deprecated	Access: read-write
OBJECT-TYPE
	DisplayString

defaultLEDColorDisconnected		1.3.6.1.4.1.13742.7.1.4
Default color of all LEDs (RGB) when no tag is connected during automatic operation; in binary format. This is deprecated in favor of assetStripDefaultLEDColorDisConnected For SET operations, the value will be applied to all asset strips For GET operations, the value returned will be the value corresponding to asset strip 1
Status: deprecated	Access: read-write
OBJECT-TYPE
	RGBCOLOR

defaultLEDColorDisconnectedStr		1.3.6.1.4.1.13742.7.1.5
Default color of all LEDs (RGB) when no tag is connected during automatic operation; string with 3 hex octets This is deprecated in favor of assetStripDefaultLEDColorDisconnectedStr For SET operations, the value will be applied to all asset strips For GET operations, the value returned will be the value corresponding to asset strip 1
Status: deprecated	Access: read-write
OBJECT-TYPE
	DisplayString

assetStripConfigurationTable		1.3.6.1.4.1.13742.7.1.6.1
A list of configuration entries. The number of entries is given by the value of assetStripCount.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AssetStripConfigurationEntryStruct

assetStripConfigurationEntry		1.3.6.1.4.1.13742.7.1.6.1.1
An entry containing configuration objects for a particular asset management strip unit.
Status: current	Access: not-accessible
OBJECT-TYPE
	AssetStripConfigurationEntryStruct

assetStripID		1.3.6.1.4.1.13742.7.1.6.1.1.1
A unique value for each asset strip. Its value ranges between 1 and the value of assetStripCount.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..256

rackUnitCount		1.3.6.1.4.1.13742.7.1.6.1.1.2
The number of rack-units for the asset management.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	8..64

assetStripState		1.3.6.1.4.1.13742.7.1.6.1.1.3
Asset management strip state.
Status: current	Access: read-only
OBJECT-TYPE
	AssetStripStateEnumeration

assetStripName		1.3.6.1.4.1.13742.7.1.6.1.1.4
Asset management strip name.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

rackUnitNumberingMode		1.3.6.1.4.1.13742.7.1.6.1.1.5
The rack unit nmbering mode for this asset strip.
Status: current	Access: read-write
OBJECT-TYPE
	RackUnitNumberingModeEnumeration

rackUnitNumberingOffset		1.3.6.1.4.1.13742.7.1.6.1.1.6
The offset (starting value) for rack Unit Numbering; This takes care of the case in which the asset strip is monitoring not all the assets but a subset of it, starting from racknumberingOffset. For example, the asset strip may be monitoring assets from 10 through 26; default value is 1
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

assetStripOrientation		1.3.6.1.4.1.13742.7.1.6.1.1.7
Is the asset strip oriented such that the connector is at the top or the bottom? If the asset strip has a tilt sensor, then this varaible is read-only and an to set(write) it will result in an error. If the asset strip does not have a tilt sensor, then this variable is read-write
Status: current	Access: read-write
OBJECT-TYPE
	AssetStripOrientationEnumeration

currentMainTagCount		1.3.6.1.4.1.13742.7.1.6.1.1.8
Number of tags currently connected to the main strip.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

currentBladeTagCount		1.3.6.1.4.1.13742.7.1.6.1.1.9
Number of tags currently connected to blade extensions. This may be larger than the maxBladeTagCount. In this case an overflow occured and all tags over maxBladeTagCount are not recognized.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

maxMainTagCount		1.3.6.1.4.1.13742.7.1.6.1.1.10
Maximum number of tags on the main asset strip.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

maxBladeTagCount		1.3.6.1.4.1.13742.7.1.6.1.1.11
Maximum number of blade tags supported.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

bladeExtensionOverflow		1.3.6.1.4.1.13742.7.1.6.1.1.12
Set if the maximum number of supported tags on blade extensions is reached. When this flag is set, new tags on blade extensions won't be discovered anymore until other tags on blade extensions are removed.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

assetStripType		1.3.6.1.4.1.13742.7.1.6.1.1.13
The asset strip type.
Status: current	Access: read-only
OBJECT-TYPE
	AssetStripTypeEnumeration

numberOfComponentAssetStrips		1.3.6.1.4.1.13742.7.1.6.1.1.14
The number of components building a composite asset strip.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

assetStripDefaultLEDColorConnected		1.3.6.1.4.1.13742.7.1.6.1.1.15
Default color of all LEDs (RGB) when a tag is connected during automatic operation; in binary format.
Status: current	Access: read-write
OBJECT-TYPE
	RGBCOLOR

assetStripDefaultLEDColorConnectedStr		1.3.6.1.4.1.13742.7.1.6.1.1.16
Default color of all LEDs (RGB) when a tag is connected during automatic operation; string with 3 hex octets
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

assetStripDefaultLEDColorDisconnected		1.3.6.1.4.1.13742.7.1.6.1.1.17
Default color of all LEDs (RGB) when no tag is connected during automatic operation; in binary format.
Status: current	Access: read-write
OBJECT-TYPE
	RGBCOLOR

assetStripDefaultLEDColorDisconnectedStr		1.3.6.1.4.1.13742.7.1.6.1.1.18
Default color of all LEDs (RGB) when no tag is connected during automatic operation; string with 3 hex octets
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

assetManagementTable		1.3.6.1.4.1.13742.7.1.7.1
A list of asset management extries containing tag information and LED state. The number of entries is given by the value of rackUnitCount.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AssetManagementEntryStruct

assetManagementEntry		1.3.6.1.4.1.13742.7.1.7.1.1
An entry containing tag information and LED state for a rack unit.
Status: current	Access: not-accessible
OBJECT-TYPE
	AssetManagementEntryStruct

rackUnitID		1.3.6.1.4.1.13742.7.1.7.1.1.1
A unique value for each rack unit. Its value ranges between 1 and the value of rackUnitCount.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..256

ledOperationMode		1.3.6.1.4.1.13742.7.1.7.1.1.2
Operation mode of the LED (manual or automatic, based on tag connection).
Status: current	Access: read-write
OBJECT-TYPE
	AssetManagementLEDOperationModeEnumeration

ledMode		1.3.6.1.4.1.13742.7.1.7.1.1.3
Mode of the LED (on, off, fastBlink,slowBlink). Setting this value automatically switches the ledOperationMode to manual.
Status: current	Access: read-write
OBJECT-TYPE
	AssetManagementLEDModeEnumeration

ledColor		1.3.6.1.4.1.13742.7.1.7.1.1.4
Color of the LED (RGB) in binary format. Setting this value automatically switches the ledOperationMode to manual.
Status: current	Access: read-write
OBJECT-TYPE
	RGBCOLOR

ledColorStr		1.3.6.1.4.1.13742.7.1.7.1.1.5
Color of the LED (RGB) in string format. It contains 3 hex octets for the RGB colors. Setting this value automatically switches the ledOperationMode to manual.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

tagID		1.3.6.1.4.1.13742.7.1.7.1.1.6
Asset management tag attached to the rack unit. Empty in case there is no tag attached.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

tagFamily		1.3.6.1.4.1.13742.7.1.7.1.1.7
Family of the asset management tag attached to the rack unit. Empty in case there is no tag attached.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

rackUnitPosition		1.3.6.1.4.1.13742.7.1.7.1.1.8
A number associated with each rack unit. Its value depends on the rack unit numbering mode. It ranges between 1 and the value of rackUnitCount. If the asset strip is disconnected, then the value is 0.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..256

rackUnitType		1.3.6.1.4.1.13742.7.1.7.1.1.9
Type of the connected tag (single server or blade extension). If the asset strip is disconnected, then the value is unknown. If the asset tag is disconnected, then the value is none.
Status: current	Access: read-only
OBJECT-TYPE
	RackUnitTypeEnumeration

bladeExtensionSize		1.3.6.1.4.1.13742.7.1.7.1.1.10
In case a blade extension is connected this returns the number of slots on the extension. If the asset strip is disconnected or no blade is connected, then the value is 0.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..16

rackUnitName		1.3.6.1.4.1.13742.7.1.7.1.1.12
Name for a specific rackunit, may be feeely chosen.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

assetStripCascadePosition		1.3.6.1.4.1.13742.7.1.7.1.1.13
This is the position of the asset Strip in a cascaded chain. Numbered in ascending order starting with the asset strip connected to the device (EMX/PX). For non-cascaded asset strips, value = 1
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..99

rackUnitRelativePosition		1.3.6.1.4.1.13742.7.1.7.1.1.14
This is the relative position of the rackUnit within the assetStrip. For cascaded asset strips such as the AMS-M2-Z and AMS-M3-Z, it is numbered in ascending order starting with the rackunit closest to the asset strip edge with the connector. For non-cascaded asset strips, value = 1
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..99

assetStripNumberOfRackUnits		1.3.6.1.4.1.13742.7.1.7.1.1.15
For non-cascaded asset strips, value = rackUnitCount For cascaded asset strips, it is the number of rack units in the asset Strip. Examples: 2 forAMS-M2-Z, 3 for AMS-M3-Z.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..256

bladeExtensionTable		1.3.6.1.4.1.13742.7.1.7.2
A list of blade server extension entries containing tag information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		BladeExtensionEntryStruct

bladeExtensionEntry		1.3.6.1.4.1.13742.7.1.7.2.1
An entry containing tag information for a blade server extension.
Status: current	Access: not-accessible
OBJECT-TYPE
	BladeExtensionEntryStruct

bladeSlotID		1.3.6.1.4.1.13742.7.1.7.2.1.1
A unique value for each slot on a blade extension.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..16

bladeTagID		1.3.6.1.4.1.13742.7.1.7.2.1.2
Asset management tag attached to a blade extension at the rack unit. Empty in case there is no tag attached.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

bladeSlotPosition		1.3.6.1.4.1.13742.7.1.7.2.1.3
A number associated with each blade slot. It ranges between 1 and the value of bladeExtensionSize.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..256

logConfiguration		1.3.6.1.4.1.13742.7.3.1
OBJECT IDENTIFIER

logSize		1.3.6.1.4.1.13742.7.3.1.1
The number of entries in the asset management log table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

oldestLogID		1.3.6.1.4.1.13742.7.3.1.2
The index of the oldest entry in the log table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

newestLogID		1.3.6.1.4.1.13742.7.3.1.3
The index of the newest entry in the log table.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

logEventCount		1.3.6.1.4.1.13742.7.3.1.4
The total number of logged events.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

assetManagementLogTable		1.3.6.1.4.1.13742.7.3.2
A ring buffer containing asset management events.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AssetManagementLogEntryStruct

assetManagementLogEntry		1.3.6.1.4.1.13742.7.3.2.1
An entry in the asset management log table.
Status: current	Access: not-accessible
OBJECT-TYPE
	AssetManagementLogEntryStruct

logIndex		1.3.6.1.4.1.13742.7.3.2.1.1
The index of an entry in the log ring buffer. Its value ranges between 1 and logSize.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..5000

logTimeStamp		1.3.6.1.4.1.13742.7.3.2.1.2
The time of the log entry in seconds relative to January 1, 1970 00:00 UTC.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

logEventType		1.3.6.1.4.1.13742.7.3.2.1.3
The type of this log entry.
Status: current	Access: read-only
OBJECT-TYPE
	LogEventTypeEnumeration

logAssetStripNumber		1.3.6.1.4.1.13742.7.3.2.1.4
A unique value for each asset strip. Its value ranges between 1 and the value of assetStripCount.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..256

logRackUnitNumber		1.3.6.1.4.1.13742.7.3.2.1.5
A unique value for each rack unit. Its value ranges between 1 and the value of rackUnitCount. It corresponds with rackUnitID, the fixed ordinal index of each rack unit.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..256

logRackUnitPosition		1.3.6.1.4.1.13742.7.3.2.1.6
A number associated with each rack unit. Its value depends on the rack unit numbering mode. It ranges between 1 and the value of rackUnitCount. If the asset strip is disconnected, then the value is 0.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..256

logSlotNumber		1.3.6.1.4.1.13742.7.3.2.1.7
A unique value for each slot on a blade extension. Value of 0 indicates a tag on the main strip. If the asset strip is disconnected, the value is 0 as well. Use logEventType to distinguish the validity.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..16

logTagID		1.3.6.1.4.1.13742.7.3.2.1.8
Asset management tag attached to the rack unit. Empty in case there is no tag attached.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

logAssetStripState		1.3.6.1.4.1.13742.7.3.2.1.9
Asset management strip state.
Status: current	Access: read-only
OBJECT-TYPE
	AssetStripStateEnumeration

logParentBladeID		1.3.6.1.4.1.13742.7.3.2.1.10
In case the tag is attached to a blade extension, this indicates the tagID of the extension. Empty in case there is no tag attached or the tag is attached on the main strip.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

deviceName		1.3.6.1.4.1.13742.7.0.0.1
The user-defined name for the Device.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

deviceInetAddressType		1.3.6.1.4.1.13742.7.0.0.2
The type of address format
Status: current	Access: read-only
OBJECT-TYPE
	InetAddressType

deviceInetIPAddress		1.3.6.1.4.1.13742.7.0.0.3
The current IP address. A value of 0.0.0.0 indicates an error or an unset option.
Status: current	Access: read-only
OBJECT-TYPE
	InetAddress

assetStripNumber		1.3.6.1.4.1.13742.7.0.0.4
A unique value for each asset strip. Its value ranges between 1 and the value of assetStripCount.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	1..256

rackUnitNumber		1.3.6.1.4.1.13742.7.0.0.5
A unique value for each rack unit. Its value ranges between 1 and the value of rackUnitCount. It corresponds with rackUnitID, the fixed ordinal index of each rack unit.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	1..256

assetStripFirmwareUpdateState		1.3.6.1.4.1.13742.7.0.0.6
The new asset strip firmware update state.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	AssetStripFirmwareUpdateStateEnumeration

deviceUserName		1.3.6.1.4.1.13742.7.0.0.7
The user currently logged in.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

deviceChangedParameter		1.3.6.1.4.1.13742.7.0.0.8
Description of the parameter(s) that changed.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DeviceConfigurationParameterEnumeration

changedParameterNewValue		1.3.6.1.4.1.13742.7.0.0.9
The new value of the changed parameter.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString

slotNumber		1.3.6.1.4.1.13742.7.0.0.10
A unique value for each slot on a blade extension. Value of 0 indicates a tag on the main strip.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	0..16

oldNumberOfComponentAssetStrips		1.3.6.1.4.1.13742.7.0.0.11
The old number of components building a composite asset strip.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	Integer32	0..255

agentInetPortNumber		1.3.6.1.4.1.13742.7.0.0.12
The UDP port number used for accessing the SNMP agent on the device. Examples: If the associated device MIB (PX2-MIB, EMD-MIB) has deviceCascadeType set to portForwarding, then master: 50500 slave 1:50501 slave 2: 50502 ...... If cascading mode is not portForwarding and default (Standard) ports are being used, then port: 161
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	InetPortNumber

assetTagConnected		1.3.6.1.4.1.13742.7.0.1
The asset tag of a rack unit was connected. bladeTagID is empty if the asset tag is not on a blade extension.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

assetTagDisconnected		1.3.6.1.4.1.13742.7.0.2
The asset tag of a rack unit was disconnected. bladeTagID is empty if the asset tag is not on a blade extension.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

assetStripStateChange		1.3.6.1.4.1.13742.7.0.3
The asset strip unit changed its state.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

assetStripFirmwareUpdate		1.3.6.1.4.1.13742.7.0.4
Asset strip firmware update state change.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

deviceConfigurationChanged		1.3.6.1.4.1.13742.7.0.5
Assetstrip configuration has changed
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

rackUnitConfigurationChanged		1.3.6.1.4.1.13742.7.0.6
Assetstrip configuration has changed
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

bladeExtensionConnected		1.3.6.1.4.1.13742.7.0.7
A blade extension has been connected to the rackunit.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

bladeExtensionDisconnected		1.3.6.1.4.1.13742.7.0.8
A blade extension has been disconnected from the rackunit.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

bladeExtensionOverflowOccured		1.3.6.1.4.1.13742.7.0.9
Maximum number of supported tags on blade extension was reached. The asset strip won't detect any new tags on blade extensions until some are removed.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

bladeExtensionOverflowCleared		1.3.6.1.4.1.13742.7.0.10
Free space for new tags on blade extensions is available again.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

compositeAssetStripCompositionChanged		1.3.6.1.4.1.13742.7.0.11
The composition of an composite asset strip changed.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE