ALPHA-INVERTER-SYS-MIB

File: ALPHA-INVERTER-SYS-MIB.mib (17753 bytes)

Imported modules

ALPHA-RESOURCE-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Integer32
ScaledNumber	simple	MODULE-COMPLIANCE
OBJECT-GROUP

Defined Types

InvSysAcPhaseEntry
SEQUENCE
	invSysAcPhaseAcOutputPowerVa	ScaledNumber
	invSysAcPhaseOutputVoltageMeasured	ScaledNumber
	invSysAcPhaseOutputCurrent	ScaledNumber
	invSysAcPhaseFrequency	ScaledNumber
	invSysAcPhaseLoadingOfInstalledPowerVa	ScaledNumber
	invSysAcPhaseNumberOfModulesOn	ScaledNumber
	invSysAcPhaseLoadingOfInstalledPowerWatts	ScaledNumber
	invSysAcPhaseDcInputToOutputPowerRatioMeasured	ScaledNumber
	invSysAcPhaseAcInputPowerWatts	ScaledNumber
	invSysAcPhaseAcInputPowerVa	ScaledNumber
	invSysAcPhaseAcOutputPowerWatts	ScaledNumber
	invSysAcPhaseDCInputPowerWatts	ScaledNumber
	invSysAcPhaseNumberOfRedundantModulesMeasured	ScaledNumber
	invSysAcPhaseNumberOfModulesDetected	ScaledNumber
	invSysAcPhaseNumberOfModulesOff	ScaledNumber
	invSysAcPhaseNumberOfModulesFailed	ScaledNumber

InvSysAcInputEntry
SEQUENCE
	invSysAcInputInputVoltage	ScaledNumber
	invSysAcInputInputCurrent	ScaledNumber
	invSysAcInputFrequency	ScaledNumber
	invSysAcInputAcInputPowerVa	ScaledNumber
	invSysAcInputNumberOfModulesOn	ScaledNumber
	invSysAcInputAcInputPowerWatts	ScaledNumber
	invSysAcInputNumberOfModulesDetected	ScaledNumber
	invSysAcInputNumberOfModulesOff	ScaledNumber
	invSysAcInputNumberOfModulesFailed	ScaledNumber

InvSysDcInputEntry
SEQUENCE
	invSysDcInputInputVoltage	ScaledNumber
	invSysDcInputInputCurrent	ScaledNumber
	invSysDcInputDcInputPowerWatts	ScaledNumber
	invSysDcInputNumberOfModulesOn	ScaledNumber
	invSysDcInputNumberOfModulesOff	ScaledNumber
	invSysDcInputNumberOfModulesFailed	ScaledNumber
	invSysDcInputNumberOfModulesDetected	ScaledNumber

Defined Values

inverterSystem		1.3.6.1.4.1.7309.5.3.3
This MIB provides a flat list of data points available from the Cordex HP controller to present information of one Inverter System.
MODULE-IDENTITY

phaseGroup		1.3.6.1.4.1.7309.5.3.3.80
OBJECT IDENTIFIER

acInputGroup		1.3.6.1.4.1.7309.5.3.3.81
OBJECT IDENTIFIER

dcInputGroup		1.3.6.1.4.1.7309.5.3.3.82
OBJECT IDENTIFIER

invTotalAcOutputPowerVa		1.3.6.1.4.1.7309.5.3.3.1
The total output power summed from all the phases (VA).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAverageLoadingOfInstalledPowerVa		1.3.6.1.4.1.7309.5.3.3.2
The average output loading of all phases (% VA).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAverageDcInputToOutputPowerRatio		1.3.6.1.4.1.7309.5.3.3.3
The percentage of the output that is taken from the DC input (%).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysSystemMode		1.3.6.1.4.1.7309.5.3.3.4
The mode of the system. See manual for decoding the number.
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysPhase1OutputPowerVa		1.3.6.1.4.1.7309.5.3.3.5
The total output power from the phase 1 (VA).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysPhase2OutputPowerVa		1.3.6.1.4.1.7309.5.3.3.6
The total output power from phase 2 (VA).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysPhase3OutputPowerVa		1.3.6.1.4.1.7309.5.3.3.7
The total output power from the phase 3 (VA).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAverageOutputVoltageMeasured		1.3.6.1.4.1.7309.5.3.3.8
The average output voltage of all the phases (V).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysEnabledDisconnects		1.3.6.1.4.1.7309.5.3.3.9
The number of disconnects that are enabled.
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysActivatedDisconnects		1.3.6.1.4.1.7309.5.3.3.10
The number of disconnects that are active.
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysTotalDCInputCurrent		1.3.6.1.4.1.7309.5.3.3.11
Total DC input current for the inverter system (A).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAverageDcInputVoltage		1.3.6.1.4.1.7309.5.3.3.12
Average DC input voltage reading for the inverter system (V).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysTotalDcInputPower		1.3.6.1.4.1.7309.5.3.3.13
Total DC input power reading for the inverter system (W).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysSystemOnBypass		1.3.6.1.4.1.7309.5.3.3.14
True when the bypass switch is on. The AC input from the grid is fed to the AC load directly.
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysTotalAcInputPowerVa		1.3.6.1.4.1.7309.5.3.3.18
Total AC input power reading of the Inverter System (VA).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcPhaseCount		1.3.6.1.4.1.7309.5.3.3.80.1

Status: current	Access: read-only
OBJECT-TYPE
	Integer32

invSysAcPhaseTable		1.3.6.1.4.1.7309.5.3.3.80.2

Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		InvSysAcPhaseEntry

invSysAcPhaseEntry		1.3.6.1.4.1.7309.5.3.3.80.2.1

Status: current	Access: not-accessible
OBJECT-TYPE
	InvSysAcPhaseEntry

invSysAcPhaseAcOutputPowerVa		1.3.6.1.4.1.7309.5.3.3.80.2.1.1
The power of the AC output (VA).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcPhaseOutputVoltageMeasured		1.3.6.1.4.1.7309.5.3.3.80.2.1.2
The output voltage of the phase or inverter (V).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcPhaseOutputCurrent		1.3.6.1.4.1.7309.5.3.3.80.2.1.3
The output current of the phase or inverter (A).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcPhaseFrequency		1.3.6.1.4.1.7309.5.3.3.80.2.1.4
Frequency to which the inverters will lock (Hz).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcPhaseLoadingOfInstalledPowerVa		1.3.6.1.4.1.7309.5.3.3.80.2.1.5
The ratio of output load to installed power (%VA).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcPhaseNumberOfModulesOn		1.3.6.1.4.1.7309.5.3.3.80.2.1.6
The number of inverters that are On and can deliver power.
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcPhaseLoadingOfInstalledPowerWatts		1.3.6.1.4.1.7309.5.3.3.80.2.1.7
The ratio of output load to installed power (% W).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcPhaseDcInputToOutputPowerRatioMeasured		1.3.6.1.4.1.7309.5.3.3.80.2.1.8
The measured percentage of DC input power to output power(%). Under light or no load this value will not computed accurately.
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcPhaseAcInputPowerWatts		1.3.6.1.4.1.7309.5.3.3.80.2.1.9
The power drawn by the AC input (W).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcPhaseAcInputPowerVa		1.3.6.1.4.1.7309.5.3.3.80.2.1.10
The power drawn by the AC input (VA).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcPhaseAcOutputPowerWatts		1.3.6.1.4.1.7309.5.3.3.80.2.1.11
The power of the AC output (W).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcPhaseDCInputPowerWatts		1.3.6.1.4.1.7309.5.3.3.80.2.1.12
The power drawn by the DC input (W).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcPhaseNumberOfRedundantModulesMeasured		1.3.6.1.4.1.7309.5.3.3.80.2.1.13
Number of inverters currently unneeded by the load.
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcPhaseNumberOfModulesDetected		1.3.6.1.4.1.7309.5.3.3.80.2.1.14
The number of inverters assigned to this phase that the T2S has detected.
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcPhaseNumberOfModulesOff		1.3.6.1.4.1.7309.5.3.3.80.2.1.15
The number of inverters that are manually turned off.
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcPhaseNumberOfModulesFailed		1.3.6.1.4.1.7309.5.3.3.80.2.1.16
The number of inverters that have failed and cannot deliver power.
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcInputCount		1.3.6.1.4.1.7309.5.3.3.81.1

Status: current	Access: read-only
OBJECT-TYPE
	Integer32

invSysAcInputTable		1.3.6.1.4.1.7309.5.3.3.81.2

Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		InvSysAcInputEntry

invSysAcInputEntry		1.3.6.1.4.1.7309.5.3.3.81.2.1

Status: current	Access: not-accessible
OBJECT-TYPE
	InvSysAcInputEntry

invSysAcInputInputVoltage		1.3.6.1.4.1.7309.5.3.3.81.2.1.1
The input voltage of the inverter or group (V).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcInputInputCurrent		1.3.6.1.4.1.7309.5.3.3.81.2.1.2
The input current of the inverter or group (A).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcInputFrequency		1.3.6.1.4.1.7309.5.3.3.81.2.1.3
The frequency of the input voltage and current of the inverter or group (Hz).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcInputAcInputPowerVa		1.3.6.1.4.1.7309.5.3.3.81.2.1.4
The power drawn by the AC input (VA).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcInputNumberOfModulesOn		1.3.6.1.4.1.7309.5.3.3.81.2.1.5
The number of inverters that are On and can deliver power.
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcInputAcInputPowerWatts		1.3.6.1.4.1.7309.5.3.3.81.2.1.6
The power drawn by the AC input (W).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcInputNumberOfModulesDetected		1.3.6.1.4.1.7309.5.3.3.81.2.1.7
The number of inverters assigned to this phase that the T2S has detected.
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcInputNumberOfModulesOff		1.3.6.1.4.1.7309.5.3.3.81.2.1.8
The number of inverters that are manually turned off.
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysAcInputNumberOfModulesFailed		1.3.6.1.4.1.7309.5.3.3.81.2.1.9
The number of inverters that have failed and cannot deliver power.
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysDcInputCount		1.3.6.1.4.1.7309.5.3.3.82.1

Status: current	Access: read-only
OBJECT-TYPE
	Integer32

invSysDcInputTable		1.3.6.1.4.1.7309.5.3.3.82.2

Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		InvSysDcInputEntry

invSysDcInputEntry		1.3.6.1.4.1.7309.5.3.3.82.2.1

Status: current	Access: not-accessible
OBJECT-TYPE
	InvSysDcInputEntry

invSysDcInputInputVoltage		1.3.6.1.4.1.7309.5.3.3.82.2.1.1
The input voltage of the inverter or group (V).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysDcInputInputCurrent		1.3.6.1.4.1.7309.5.3.3.82.2.1.2
The input current of the inverter or group (A).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysDcInputDcInputPowerWatts		1.3.6.1.4.1.7309.5.3.3.82.2.1.3
The power drawn by the DC input (W).
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysDcInputNumberOfModulesOn		1.3.6.1.4.1.7309.5.3.3.82.2.1.4
The number of inverters that are On and can deliver power.
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysDcInputNumberOfModulesOff		1.3.6.1.4.1.7309.5.3.3.82.2.1.5
The number of inverters that are manually turned off.
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysDcInputNumberOfModulesFailed		1.3.6.1.4.1.7309.5.3.3.82.2.1.6
The number of inverters that have failed and cannot deliver power.
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

invSysDcInputNumberOfModulesDetected		1.3.6.1.4.1.7309.5.3.3.82.2.1.7
The number of inverters assigned to this phase that the T2S has detected.
Status: current	Access: read-only
OBJECT-TYPE
	ScaledNumber

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor