ALCATEL-IND1-SYSTEM-MIB

File: ALCATEL-IND1-SYSTEM-MIB.mib (96071 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
SNMP-FRAMEWORK-MIB IPV6-TC ALCATEL-IND1-BASE

Imported symbols

MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE
IpAddress Integer32 Unsigned32
MODULE-COMPLIANCE OBJECT-GROUP TEXTUAL-CONVENTION
TruthValue RowStatus SnmpAdminString
Ipv6Address hardentIND1System

Defined Types

SystemFileType  
TEXTUAL-CONVENTION    
  current INTEGER file(1), directory(2), undefined(3), tarArchive(4)

SwitchLoggingIndex  
TEXTUAL-CONVENTION    
  current INTEGER console(1), flash(2), socket(3), ipaddr(4)

AppIdIndex  
TEXTUAL-CONVENTION    
  current Integer32 0..254

Enable  
TEXTUAL-CONVENTION    
  current INTEGER enabled(1), disabled(2)

FileSystemIndex  
TEXTUAL-CONVENTION    
  current INTEGER flash(1), uflash(2)

SeverityLevel  
TEXTUAL-CONVENTION    
  current INTEGER severityLevelOff(0), severityLevelAlarm(1), severityLevelError(2), severityLevelAlert(3), severityLevelWarn(4), severityLevelInfo(5), severityLevelDbg1(6), severityLevelDbg2(7), severityLevelDbg3(8)

SysLogFacilityId  
TEXTUAL-CONVENTION    
  current INTEGER uucp(0), user(1), system(2), syslog(3), secAuth2(4), secAuth1(5), ntp(6), netNews(7), mail(8), lptr(9), logAudit(10), logAlert(11), local7(12), local6(13), local5(14), local4(15), local3(16), local2(17), local1(18), local0(19), kernel(20), ftp(21), clock2(22), clock1(23)

CommandPercentComplete  
TEXTUAL-CONVENTION    
  current Integer32 0..100

VrfId  
TEXTUAL-CONVENTION    
  current Integer32 1..64

AgeLimit  
TEXTUAL-CONVENTION    
  current Integer32 1..64

SystemMicrocodePackageEntry  
SEQUENCE    
  systemMicrocodePackageDirectoryIndex Unsigned32
  systemMicrocodePackageDirectory SnmpAdminString
  systemMicrocodePackageIndex Unsigned32
  systemMicrocodePackageVersion SnmpAdminString
  systemMicrocodePackageName SnmpAdminString
  systemMicrocodePackageDescription SnmpAdminString
  systemMicrocodePackageStatus INTEGER
  systemMicrocodePackageSize Unsigned32

SystemHardwareFpgaVersionEntry  
SEQUENCE    
  systemHardwareFpgaVersionIndex Integer32
  systemHardwareFpgaVersion Unsigned32

SystemServicesKtraceLevelEntry  
SEQUENCE    
  systemServicesKtraceLevelAppId AppIdIndex
  systemServicesKtraceLevel SeverityLevel

SystemServicesSystraceLevelEntry  
SEQUENCE    
  systemServicesSystraceLevelAppId AppIdIndex
  systemServicesSystraceLevel SeverityLevel

SystemUpdateStatusEntry  
SEQUENCE    
  systemUpdateIndex Integer32
  systemUpdateStatus INTEGER
  systemUpdateErrorCode INTEGER

SystemServicesArchiveEntry  
SEQUENCE    
  systemServicesArchiveIndex Unsigned32
  systemServicesArchiveName SnmpAdminString
  systemServicesArchiveType SystemFileType
  systemServicesArchiveSize Unsigned32
  systemServicesArchiveAttr INTEGER

SystemFileSystemEntry  
SEQUENCE    
  systemFileSystemIndex FileSystemIndex
  systemFileSystemName SnmpAdminString
  systemFileSystemFreeSpace Unsigned32

SystemFileSystemFileEntry  
SEQUENCE    
  systemFileSystemFileIndex Unsigned32
  systemFileSystemFileName SnmpAdminString
  systemFileSystemFileType SystemFileType
  systemFileSystemFileSize Unsigned32
  systemFileSystemFileAttr INTEGER
  systemFileSystemFileDateTime SnmpAdminString

SystemSwitchLoggingLevelEntry  
SEQUENCE    
  systemSwitchLoggingApplicationAppId AppIdIndex
  systemSwitchLoggingApplicationSubAppId AppIdIndex
  systemSwitchLoggingApplicationSubAppVrfLevelIndex Integer32
  systemSwitchLoggingApplicationAppName SnmpAdminString
  systemSwitchLoggingApplicationSubAppName SnmpAdminString
  systemSwitchLoggingApplicationSubAppLevel SeverityLevel
  systemSwitchLoggingApplicationSubAppVrfLevelString SnmpAdminString

SystemSwitchLoggingHostEntry  
SEQUENCE    
  systemSwitchLoggingHostIpAddr IpAddress
  systemSwitchLoggingHostPort Integer32
  systemSwitchLoggingHostStatus RowStatus
  systemSwitchLoggingHostUserCommandHost Enable
  systemSwitchLoggingHostVrfName SnmpAdminString

SystemSwitchLoggingHostv6Entry  
SEQUENCE    
  systemSwitchLoggingHostv6IpAddr Ipv6Address
  systemSwitchLoggingHostv6Port Integer32
  systemSwitchLoggingHostv6Status RowStatus
  systemSwitchLoggingHostv6UserCommandHost Enable
  systemSwitchLoggingHostv6VrfName SnmpAdminString

Defined Values

alcatelIND1SystemMIB 1.3.6.1.4.1.6486.801.1.1.1.2.1
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Proprietary System Subsystem. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY    

alcatelIND1SystemMIBObjects 1.3.6.1.4.1.6486.801.1.1.1.2.1.1
Branch For BOP Proprietary System Subsystem Managed Objects.
OBJECT-IDENTITY    

alcatelIND1SystemMIBConformance 1.3.6.1.4.1.6486.801.1.1.1.2.1.2
Branch For Alcatel IND BOP Proprietary System Subsystem Conformance Information.
OBJECT-IDENTITY    

alcatelIND1SystemMIBGroups 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1
Branch For Alcatel IND BOP Proprietary System Subsystem Units Of Conformance.
OBJECT-IDENTITY    

alcatelIND1SystemMIBCompliances 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.2
Branch For Alcatel IND BOP Proprietary System Subsystem Compliance Statements.
OBJECT-IDENTITY    

systemMicrocode 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1
OBJECT IDENTIFIER    

systemBootParams 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.2
OBJECT IDENTIFIER    

systemHardware 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3
OBJECT IDENTIFIER    

systemFileSystem 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4
OBJECT IDENTIFIER    

systemServices 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5
OBJECT IDENTIFIER    

systemSwitchLogging 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6
OBJECT IDENTIFIER    

systemDNS 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7
OBJECT IDENTIFIER    

systemMicrocodePackageTable 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1
the microcode package table
OBJECT-TYPE    
  SEQUENCE OF  
    SystemMicrocodePackageEntry

systemMicrocodePackageEntry 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1
a row in the microcode package table
OBJECT-TYPE    
  SystemMicrocodePackageEntry  

systemMicrocodePackageDirectoryIndex 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.1
The package index for directories. Values 1-4 are pre-defined as: loaded(1), certified(2), working(3), issu(4). Values 5+ are user working directories in /flash assigned by the system. Values 5+ remain associated with a directory until reboot, takeover, the directory no longer contains valid images or the directory no longer exists.
OBJECT-TYPE    
  Unsigned32  

systemMicrocodePackageDirectory 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.2
The directory name under flash where the microcode package is found. Directories with names longer than 108 characters will be skipped.
OBJECT-TYPE    
  SnmpAdminString Size(1..108)  

systemMicrocodePackageIndex 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.3
The index to the package sub table in the microcode table
OBJECT-TYPE    
  Unsigned32  

systemMicrocodePackageVersion 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.4
The version of the microcode package (Fos.img, Fbase.img, etc.)
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemMicrocodePackageName 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.5
The name of the microcode package
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemMicrocodePackageDescription 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.6
The description of the microcode package
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemMicrocodePackageStatus 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.7
The status of the microcode package
OBJECT-TYPE    
  INTEGER undefined(1), ok(2), inuse(3)  

systemMicrocodePackageSize 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.1.1.1.8
The size of the microcode package
OBJECT-TYPE    
  Unsigned32  

systemBootNetwork 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.2.1
this object is the base IP address of the EMP for this CMM
OBJECT-TYPE    
  IpAddress  

systemBootNetworkGateway 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.2.2
this object is the gateway of the EMP for this CMM
OBJECT-TYPE    
  IpAddress  

systemBootNetworkNetmask 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.2.3
This is the Netmask of the EMP that is used when this CMM boots.
OBJECT-TYPE    
  IpAddress  

systemHardwareFlashMfg 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.1
This object identifies the manufacturer of the Flash memory used on this product. toshiba(7) is for hawk only. The reason 7 is used is because 5 is already used for micron and 6 is for kingston. toshiba, sandisk, and sst are compact flashes for the hawk only.
OBJECT-TYPE    
  INTEGER other(1), amd(2), intel(3), atmel(4), toshiba(7), sandisk(8), sst(9), spansion(10), wintec(13)  

systemHardwareFlashSize 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.2
This object identifies the size of the flash memory available on this CMM. It is the total flash hardware memory and does not indicate how much of the memory is free, used, etc.
OBJECT-TYPE    
  Unsigned32  

systemHardwareMemoryMfg 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.3
This object identifies the manufacturer of the RAM memory used on this CMM.
OBJECT-TYPE    
  INTEGER other(1), amd(2), intel(3), atmel(4), micron(5), kingston(6), dataram(10), interward(11), notreadable(12)  

systemHardwareMemorySize 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.4
This object identifies the size of the RAM memory available on this CMM. It is the total RAM hardware memory and does not indicate how much of the memory is free, used, etc.
OBJECT-TYPE    
  Unsigned32  

systemHardwareNVRAMBatteryLow 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.5
This object identifies the whether the NVRAM battery is low. true(1), false(2)
OBJECT-TYPE    
  TruthValue  

systemHardwareBootCpuType 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.6
Indicates the manufacturer and model number of the CPU. Currently, only two types of processors are enumerated.
OBJECT-TYPE    
  INTEGER other(1), sparc380(2), sparcV9(3), ppc(4), ppc8540(5), ppc8572(6)  

systemHardwareJumperInterruptBoot 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.7
This object identifies whether the Interrupt Boot Jumper on this CMM is set: True(1), False(2)
OBJECT-TYPE    
  TruthValue  

systemHardwareJumperForceUartDefaults 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.8
This object identifies whether the Force Uart Defaults Jumper on this CMM is set: True(1), False(2)
OBJECT-TYPE    
  TruthValue  

systemHardwareJumperRunExtendedMemoryDiagnostics 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.9
This object identifies whether the Run Extended Memory Diagnostics Jumper on this CMM is set: True(1), False(2)
OBJECT-TYPE    
  TruthValue  

systemHardwareJumperSpare 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.10
This object identifies whether the Spare Jumper on this CMM is set: True(1), False(2)
OBJECT-TYPE    
  TruthValue  

systemHardwareFpgaVersionTable 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.11
This table contains the FPGA version for each FPGA on this CMM
OBJECT-TYPE    
  SEQUENCE OF  
    SystemHardwareFpgaVersionEntry

systemHardwareFpgaVersionEntry 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.11.1
a row in the systemHardwareFpgaVersionTable
OBJECT-TYPE    
  SystemHardwareFpgaVersionEntry  

systemHardwareFpgaVersionIndex 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.11.1.1
This is the index to one of the FPGA versions on this CMM
OBJECT-TYPE    
  Integer32 1..3  

systemHardwareFpgaVersion 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.11.1.2
This is the major version of one of the FPGA devices on this CMM. refer to the systemHardwareMinorFpgaVersion for the minor number.
OBJECT-TYPE    
  Unsigned32  

systemHardwareBootRomVersion 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.12
A string that identifies the boot rom version
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemHardwareBackupMiniBootVersion 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.13
A string that identifies the backup miniboot version.
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemHardwareDefaultMiniBootVersion 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.14
A string that identifies the default miniboot version.
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemHardwareMinorFpgaVersion 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.15
A string that identifies the minor FPGA version. Refer to the systemHardwareFpgaVersion for the major FPGA version number.
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemHardwareCpldVersion 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.16
A string that identifies the CPLD version.
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemHardwareUbootVersion 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.17
A string that identifies the Uboot version.
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemHardwareProdRegId 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.18
A string that identifies the product ID register
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemHardwareRevisionRegister 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.19
A string that identifies the hardware revision register
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemHardwareXfpId 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.20
A string that identifies the XFP ID
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemHardwareUbootMinibootVersion 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.3.21
A string that identifies the Uboot-miniboot version.
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemServicesDate 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.1
This object contains the current System Date in the following format: MM/DD/YYYY
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemServicesTime 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.2
This object contains the current System Time in the following format: HH:MM:SS
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemServicesTimezone 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.3
This object contains the current Hour Offset from UTC in the following format: -13:00 to +12:00 OR a well known timezone (PST,CST,etc.)
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemServicesTimezoneStartWeek 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.4
first, second, third, fourth, fifth, last = 1,2,3,4,5,6
OBJECT-TYPE    
  Unsigned32  

systemServicesTimezoneStartDay 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.5
Sunday, Monday, Tues... = 1,2,3,4,5,6,7
OBJECT-TYPE    
  Unsigned32  

systemServicesTimezoneStartMonth 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.6
January, February, march... = 1,2,3,4,5,67,8,9,10,11,12
OBJECT-TYPE    
  Unsigned32  

systemServicesTimezoneStartTime 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.7
2:00, 3:00, 4:00... = 200, 300, 400, etc.
OBJECT-TYPE    
  Unsigned32  

systemServicesTimezoneOffset 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.8
60 minutes = 60
OBJECT-TYPE    
  Unsigned32  

systemServicesTimezoneEndWeek 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.9
first, second, third, fourth, fifth, last = 1,2,3,4,5,6
OBJECT-TYPE    
  Unsigned32  

systemServicesTimezoneEndDay 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.10
Sunday, Monday, Tues... = 1,2,3,4,5,6,7
OBJECT-TYPE    
  Unsigned32  

systemServicesTimezoneEndMonth 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.11
January, February, march... = 1,2,3,4,5,6,7,8,9,10,11,12
OBJECT-TYPE    
  Unsigned32  

systemServicesTimezoneEndTime 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.12
2:00, 3:00, 4:00... = 200, 300, 400, etc.
OBJECT-TYPE    
  Unsigned32  

systemServicesEnableDST 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.13
This object enables and disables the DST.
OBJECT-TYPE    
  Enable  

systemServicesWorkingDirectory 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.14
This object contains the current file system working directory for this CMM. For example, /flash/certified
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemServicesArg1 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.15
the 1st argument for system services action routines
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemServicesArg2 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.16
the 2nd argument for system services action routines
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemServicesArg3 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.17
the 3rd argument for system services action routines
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemServicesArg4 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.18
the 4th argument for system services action routines
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemServicesArg5 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.19
the 5th argument for system services action routines
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemServicesArg6 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.20
the 6th argument for system services action routines
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemServicesArg7 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.21
the 7th argument for system services action routines
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemServicesArg8 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.22
the 8th argument for system services action routines
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemServicesArg9 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.23
the 9th argument for system services action routines
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemServicesAction 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.24
This object identifies which of the above Actions is to be performed by the System Services Application. Most Actions require one or more parameters be set before the Action is executed. systemServicesAction - 26 for bootrom, 27 for default miniboot, and 28 for backup miniboot use systemServicesArg1 for name of the file scp- the first 2 arguments are going to be used. Set arg 1 with the source and the arg 2 with the destination file(s). E.g. scp LocalDir/testfileX.txt admin@10.255.11.1:RemoteDir/testfileX.txt For mount and umount, systemServicesArg1 specifies the mount point (such as /uflash). For newfs, systemServicesArg1 contains the name of the file-system (/uflash or /flash) which will be created. On /uflash, a FAT16 file system is created with long name naming conventions. For fsck, systemServicesArg1 contains the name of the file-system (/uflash or /flash) which will be checked and systemServicesArg2 will contain the string repair or no-repair depending on if autocorrection is requested. To see all file systems currently mounted, refer to the systemFileSystemTable. For backup and restore, systemServicesArg1 contains the archive name and systemServicesArg2 through Arg9 contains the directories and/or files to be archived/extracted. For newfs, fsck, backup and restore, the systemServicesActionPercentComplete variable can be inspected to see a progress indication.
OBJECT-TYPE    
  INTEGER noaction(0), mkdir(1), rmdir(2), mv(3), rm(4), rmr(5), cp(6), cpr(7), chmodpw(8), chmodmw(9), fsck(10), ftp(11), rz(12), vi(13), telnet(14), install(15), ed(16), more(17), newfs(18), dshell(19), view(20), modbootparams(21), filedir(22), ssh(23), sftp(24), debugPmdNi(25), bootrom(26), defaultminiboot(27), backupminiboot(28), fpgacmm(29), ubootcmm(30), ubootni(31), scp(32), aclman(33), ubootMinibootAllSlots(34), miniboot(35), upgradeLicence(36), restoreLicence(37), updateDSineXtroller(38), ftp6(39), telnet6(40), ssh6(41), sftp6(42), mount(43), unmount(44), backup(45), restore(46), tftp(47), fscollect(48), fpgani(49)  

systemServicesResultCode 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.25
the result of a system services application
OBJECT-TYPE    
  Unsigned32  

systemServicesResultString 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.26
the string result of a system services application
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemServicesKtraceEnable 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.27
enables/disables the Ktrace facility
OBJECT-TYPE    
  Enable  

systemServicesSystraceEnable 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.28
enables/disables the Systrace facility
OBJECT-TYPE    
  Enable  

systemServicesTtyLines 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.29
the number of tty lines for a console screen
OBJECT-TYPE    
  Unsigned32 0..255  

systemServicesTtyColumns 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.30
the number of tty columns for a console screen
OBJECT-TYPE    
  Unsigned32 0..255  

systemServicesMemMonitorEnable 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.31
disables/enables the kernel Memory Monitor feature
OBJECT-TYPE    
  Enable  

systemServicesKtraceLevelTable 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.32
the table of Ktrace severity level settings
OBJECT-TYPE    
  SEQUENCE OF  
    SystemServicesKtraceLevelEntry

systemServicesKtraceLevelEntry 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.32.1
A row in the system services ktrace level table. There is one entry for each possible Application ID
OBJECT-TYPE    
  SystemServicesKtraceLevelEntry  

systemServicesKtraceLevelAppId 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.32.1.1
the index into the ktrace level table
OBJECT-TYPE    
  AppIdIndex  

systemServicesKtraceLevel 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.32.1.2
the ktrace level for a specific Application ID
OBJECT-TYPE    
  SeverityLevel  

systemServicesSystraceLevelTable 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.33
the table of Systrace severity level settings
OBJECT-TYPE    
  SEQUENCE OF  
    SystemServicesSystraceLevelEntry

systemServicesSystraceLevelEntry 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.33.1
A row in the system services systrace level table. There is one entry for each possible Application ID
OBJECT-TYPE    
  SystemServicesSystraceLevelEntry  

systemServicesSystraceLevelAppId 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.33.1.1
the Systrace level for a specific Application ID.
OBJECT-TYPE    
  AppIdIndex  

systemServicesSystraceLevel 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.33.1.2
the Systrace level for a specific Application ID.
OBJECT-TYPE    
  SeverityLevel  

systemUpdateStatusTable 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.34
Provides update status for firmware updates
OBJECT-TYPE    
  SEQUENCE OF  
    SystemUpdateStatusEntry

systemUpdateStatusEntry 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.34.1
A row in the update status table.
OBJECT-TYPE    
  SystemUpdateStatusEntry  

systemUpdateIndex 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.34.1.1
The index to the CMM for which status is required.
OBJECT-TYPE    
  Integer32 1..72  

systemUpdateStatus 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.34.1.2
Status of a firmware update. In the case of doneNok, further information can be obtained from systemUpdateErrorCode.
OBJECT-TYPE    
  INTEGER inProgress(1), doneOk(2), doneNok(3), noOp(4)  

systemUpdateErrorCode 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.34.1.3
Error codes for done_nok.
OBJECT-TYPE    
  INTEGER msgSendIpcErr(1), fXferOPenErr(2), fXferFtpErr(3), fXferReadErr(4), fXferWriteErr(5), fXferReplyErr(6), fXferQuitErr(7), fXferFcloseErr(8), fileNameErr(9), rmFileErr(10), noInstallComp(11), notSysResource(12), notSupported(13), invalidValue(14), waitMsgMaxTry(15), installDrvErr(16), fileNotFound(17), notPrimary(18), commandBlocked(19), noError(20), invalidNi(21), niNotPresent(22), dupSerialNum(23), upToDate(24), invalidModType(25), maxFaiCount(26), invalidKey(27), niLocked(28)  

systemServicesActionPercentComplete 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.35
This object identifies the percent completion of the currently executing systemServicesAction.
OBJECT-TYPE    
  CommandPercentComplete  

systemServicesCurrentArchivePathName 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.36
This object identifies the archive currently being read via the systemServicesArchiveTable. This object is the complete pathname to the archive and must be set prior to reading the systemServicesArchiveTable.
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemServicesArchiveTable 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37
This table contains the contents of a backup archive. This table is used by the restore action command to display (rather than backup) an archive. The restore command will populate this table with archive information read from the archive specified by the systemServicesAction restore command. This is done as follows. Set the systemServicesArg1 object to the archive name to be read. Set the systemServicesArg2 object to the string: display-only. Set the systemServicesAction object to restore. Then read this table.
OBJECT-TYPE    
  SEQUENCE OF  
    SystemServicesArchiveEntry

systemServicesArchiveEntry 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1
A row in the system services archive table.
OBJECT-TYPE    
  SystemServicesArchiveEntry  

systemServicesArchiveIndex 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1.1
Index to a specific entry in the backup archive file.
OBJECT-TYPE    
  Unsigned32  

systemServicesArchiveName 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1.2
The name of a file in the backup archive file.
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemServicesArchiveType 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1.3
The type of a file in the backup archive file.
OBJECT-TYPE    
  SystemFileType  

systemServicesArchiveSize 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1.4
The size of a file in the backup archive file.
OBJECT-TYPE    
  Unsigned32  

systemServicesArchiveAttr 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.37.1.5
The attributes of a file in the backup archive file.
OBJECT-TYPE    
  INTEGER undefined(1), readOnly(2), readWrite(3), writeOnly(4)  

systemServicesUsbEnable 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.38
disable/enable the USB interface
OBJECT-TYPE    
  Enable  

systemServicesUsbAutoCopyEnable 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.39
disable/enable the USB auto-copy facility
OBJECT-TYPE    
  Enable  

systemServicesUsbMounted 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.5.40
determinse if usb is mounted
OBJECT-TYPE    
  Enable  

systemFileSystemTable 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.1
system file system table for this CMM.
OBJECT-TYPE    
  SEQUENCE OF  
    SystemFileSystemEntry

systemFileSystemEntry 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.1.1
A row in the system file system table
OBJECT-TYPE    
  SystemFileSystemEntry  

systemFileSystemIndex 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.1.1.1
Index to a specific file system.
OBJECT-TYPE    
  FileSystemIndex  

systemFileSystemName 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.1.1.2
The name of the file system.
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemFileSystemFreeSpace 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.1.1.3
the free space in octets of this file system
OBJECT-TYPE    
  Unsigned32  

systemFileSystemDirectoryName 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.2
The name of a file system directory. This object is used in conjunction with an Action command. The Action command will set this directory name to the name of a specific directory. Information for all of the files in that directory will then be read from the file system and the appropriate values written in the entries in the systemFileSystemFile table. All this is being done to give snmp access to the file system files.
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemFileSystemDirectoryDateTime 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.3
the date and time (in system format) of the last access to this directory
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemFileSystemFileTable 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4
system file system File table for this CMM. This table is used by an Action command which will populate it with file information read from the files in the specified directory.
OBJECT-TYPE    
  SEQUENCE OF  
    SystemFileSystemFileEntry

systemFileSystemFileEntry 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1
A row in the system file system File table
OBJECT-TYPE    
  SystemFileSystemFileEntry  

systemFileSystemFileIndex 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.1
Index to a specific file system File.
OBJECT-TYPE    
  Unsigned32  

systemFileSystemFileName 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.2
The name of a file system File
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemFileSystemFileType 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.3
The Type of a file system File
OBJECT-TYPE    
  SystemFileType  

systemFileSystemFileSize 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.4
size of this file
OBJECT-TYPE    
  Unsigned32  

systemFileSystemFileAttr 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.5
attributes of this file
OBJECT-TYPE    
  INTEGER undefined(1), readOnly(2), readWrite(3), writeOnly(4)  

systemFileSystemFileDateTime 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.4.4.1.6
the modification date and time of a file
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemSwitchLoggingIndex 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.1
A small positive integer used to identify a switch logging output
OBJECT-TYPE    
  SwitchLoggingIndex  

systemSwitchLoggingEnable 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.2
Global switch logging enable/disable
OBJECT-TYPE    
  Enable  

systemSwitchLoggingFlash 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.3
Enable/disable switch logging to flash
OBJECT-TYPE    
  Enable  

systemSwitchLoggingSocket 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.4
Enable/disable switch logging to a socket
OBJECT-TYPE    
  Enable  

systemSwitchLoggingSocketIpAddr 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.5
The IP Address of a remote host that can be used to send switch logging records to as an option
OBJECT-TYPE    
  IpAddress  

systemSwitchLoggingConsole 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.6
Enable/disable switch logging to the console
OBJECT-TYPE    
  Enable  

systemSwitchLoggingApplicationTable 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7
The table of switch logging registered applications,one for each Application ID
OBJECT-TYPE    
  SEQUENCE OF  
    SystemSwitchLoggingLevelEntry

systemSwitchLoggingLevelEntry 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1
A row in the system switch logging application table
OBJECT-TYPE    
  SystemSwitchLoggingLevelEntry  

systemSwitchLoggingApplicationAppId 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.1
A specific application ID which has a registered application associated with it. This application ID is used as an index into the application table.
OBJECT-TYPE    
  AppIdIndex  

systemSwitchLoggingApplicationSubAppId 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.2
A specific sub-application ID which belongs to a registered application associated with it. This sub-application ID is used as part of the index into the application table.
OBJECT-TYPE    
  AppIdIndex  

systemSwitchLoggingApplicationSubAppVrfLevelIndex 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.3
The specific sub-application's VRF severity level. This severity level is used as part of the index into the application table.
OBJECT-TYPE    
  Integer32 0..8  

systemSwitchLoggingApplicationAppName 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.4
Application name in an entry in the table
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemSwitchLoggingApplicationSubAppName 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.5
The name of the specific sub-application ID.
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemSwitchLoggingApplicationSubAppLevel 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.6
The severity level of the specific sub-application ID.
OBJECT-TYPE    
  SeverityLevel  

systemSwitchLoggingApplicationSubAppVrfLevelString 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.7.1.7
A string with comma-delimited VRF IDs or ranges of VRF IDs that belong to this sub-application's VRF severity level.
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemSwitchLoggingClear 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.8
Enable clearing of switch logging entries
OBJECT-TYPE    
  Unsigned32  

systemSwitchLoggingFileSize 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.9
Set size of swlog logging file
OBJECT-TYPE    
  Unsigned32  

systemSwitchLoggingHostTable 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10
The table of switch logging remote hosts.
OBJECT-TYPE    
  SEQUENCE OF  
    SystemSwitchLoggingHostEntry

systemSwitchLoggingHostEntry 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1
A remote switch logging server entry.
OBJECT-TYPE    
  SystemSwitchLoggingHostEntry  

systemSwitchLoggingHostIpAddr 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.1
The IP Address of a remote host that can be used to send switch logging records to.
OBJECT-TYPE    
  IpAddress  

systemSwitchLoggingHostPort 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.2
The port number of a remote host that can be used to send switch logging records to.
OBJECT-TYPE    
  Integer32 1..65535  

systemSwitchLoggingHostStatus 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.3
Provides the ability to add or remove a remote host entry.
OBJECT-TYPE    
  RowStatus  

systemSwitchLoggingHostUserCommandHost 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.4
Indicates whether this host may receive user command data.
OBJECT-TYPE    
  Enable  

systemSwitchLoggingHostVrfName 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.10.1.5
The name or number of the VRF to be used to send switch logging records to.
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

systemSwitchLoggingHostv6Table 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11
The table of switch logging remote hosts.
OBJECT-TYPE    
  SEQUENCE OF  
    SystemSwitchLoggingHostv6Entry

systemSwitchLoggingHostv6Entry 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1
A remote switch logging server entry.
OBJECT-TYPE    
  SystemSwitchLoggingHostv6Entry  

systemSwitchLoggingHostv6IpAddr 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.1
The IP Address of a remote host that can be used to send switch logging records to.
OBJECT-TYPE    
  Ipv6Address  

systemSwitchLoggingHostv6Port 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.2
The port number of a remote host that can be used to send switch logging records to.
OBJECT-TYPE    
  Integer32 1..65535  

systemSwitchLoggingHostv6Status 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.3
Provides the ability to add or remove a remote host entry.
OBJECT-TYPE    
  RowStatus  

systemSwitchLoggingHostv6UserCommandHost 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.4
Indicates whether this host may receive user command data.
OBJECT-TYPE    
  Enable  

systemSwitchLoggingHostv6VrfName 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.11.1.5
The name or number of the VRF to be used to send switch logging records to.
OBJECT-TYPE    
  SnmpAdminString Size(0..20)  

systemSwitchLoggingHostCount 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.12
The number of remote hosts currently defined.
OBJECT-TYPE    
  Integer32 0..4  

systemSwitchLoggingConsoleLevel 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.13
Messages whose severity level is equal to or more severe than this value will be displayed to the console.
OBJECT-TYPE    
  SeverityLevel  

systemSwitchLoggingUserCommandStatus 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.14
User commands will be logged to remote hosts when enabled.
OBJECT-TYPE    
  Enable  

systemSwitchLoggingSysLogFacilityId 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.15
This textual convention enumerates the facilities that originate syslog messages. The Facilities of syslog messages are numerically coded with decimal values. Some of the operating system daemons and processes are traditionally designated by the Facility values given below. Daemons and processes that do not have an explicitly assigned Facility may use any of the 'local use' Facilities or they may use the 'user-level' Facility. For interoperability and backwards compatibility reasons, mapping specified in this document between a label which represents a Facility and the value which represents the corresponding code, is normative. So the mapping from a label configured by operators in syslog.conf or equivalent will consistently map to the same Facility code regardless of implementation, but the label itself is often semantically meaningless, because it is impractical to attempt to enumerate all possible facilities, and the enumeration (label and corresponding value) that is used by an actual Facility is, and has historically been, implementation-dependent. For example, the foobar application might log messages as having come from local7, even though there is no 'local' process on the device, and the operator can configure syslog.conf to have local7.critical messages be relayed, even though there might be multiple facilities using Facility local7. This is typical current practice, and originators, relays and collectors know how to handle this situation. For improved accuracy, the foobar application can also include an APPNAME Structured Data Element.
OBJECT-TYPE    
  SysLogFacilityId  

systemSwitchLoggingLevel 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.16
The logging level for a specific application id.
OBJECT-TYPE    
  SeverityLevel  

systemSwitchLoggingAppName 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.17
Application name used as an index into the table
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemSwitchLoggingDuplicateDetect 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.18
Global switch logging enable/disable duplicate detection
OBJECT-TYPE    
  Enable  

systemSwitchLoggingPreamble 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.19
Global switch logging enable/disable printing preamble
OBJECT-TYPE    
  Enable  

systemSwitchLoggingDebug 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.20
Global switch logging enable/disable debug information
OBJECT-TYPE    
  Enable  

systemSwitchLoggingVrf 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.21
Global switch logging subapplicastion VRF ID
OBJECT-TYPE    
  VrfId  

systemSwitchLoggingHashAgeLimit 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.22
Global switch logging Hash Table Age Limit
OBJECT-TYPE    
  AgeLimit  

systemSwitchLoggingTty 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.23
Enable/disable switch logging to tty
OBJECT-TYPE    
  Enable  

systemSwitchLoggingSubAppNbr 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.24
The subapplication number of a given application
OBJECT-TYPE    
  AppIdIndex  

systemSwitchLoggingLibraryName 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.25
Library name used as an index into the table of registered libraries
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemSwitchLoggingLoopback0 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.6.26
Enable/disable switch logging using Loopback0 interface as the source ip address when logging to syslog server
OBJECT-TYPE    
  Enable  

systemDNSEnableDnsResolver 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.1
Global Domain Name Service enable/disable
OBJECT-TYPE    
  Enable  

systemDNSDomainName 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.2
current domain name used by the Domain Name Service
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

systemDNSNsAddr1 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.3
1st part of address used by the Domain Name Service
OBJECT-TYPE    
  IpAddress  

systemDNSNsAddr2 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.4
2nd part of address used by the Domain Name Service
OBJECT-TYPE    
  IpAddress  

systemDNSNsAddr3 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.5
3rd part of address used by the Domain Name Service
OBJECT-TYPE    
  IpAddress  

systemDNSNsIPv6Addr1 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.6
IPv6 address of the Primary DNS server
OBJECT-TYPE    
  Ipv6Address  

systemDNSNsIPv6Addr2 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.7
IPv6 address of the Secondary DNS server
OBJECT-TYPE    
  Ipv6Address  

systemDNSNsIPv6Addr3 1.3.6.1.4.1.6486.801.1.1.1.2.1.1.7.8
IPv6 address of the third DNS server
OBJECT-TYPE    
  Ipv6Address  

alcatelIND1SystemMIBCompliance 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.2.1
Compliance statement for Alcatel BOP Proprietary System Subsystem.
MODULE-COMPLIANCE    

systemMicrocodeGroup 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.1
Group all the system microcode objects together
OBJECT-GROUP    

systemBootParamsGroup 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.2
Group all the system boot parameters together
OBJECT-GROUP    

systemHardwareGroup 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.3
Group all the system Hardware Data together
OBJECT-GROUP    

systemServicesGroup 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.4
Group all the system services parameters together
OBJECT-GROUP    

systemFileSystemGroup 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.5
Group all the system flash file parameters together
OBJECT-GROUP    

systemSwitchLoggingGroup 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.6
Group all the switch logging parameters together
OBJECT-GROUP    

systemDNSGroup 1.3.6.1.4.1.6486.801.1.1.1.2.1.2.1.7
Group all the systemDNS parameters together
OBJECT-GROUP