ADN-ENV-MIB

File: ADN-ENV-MIB.mib (219400 bytes)

Imported modules

RFC-1212 RFC1155-SMI ADN-MIB
SNMPv2-TC ATM-MIB FRNETSERV-MIB
IF-MIB

Imported symbols

OBJECT-TYPE Counter IpAddress
Gauge adnAtmUniVcCconnectIndex adnAtmUniVpCconnectIndex
adnLapDLCIIndex adnCongMgmtVCDLCIIndex adnEquipIndex
adnEquipType adnFrtVCDLCIIndex adn
adnEnvHss AdnPercent AdnFrtVCStates
AdnEnableDisabled AdnCouplerIndex DisplayString
atmVclVci atmVclVpi atmVplVpi
frPVCEndptDLCIIndex ifIndex InterfaceIndex

Defined Types

AdnFrtChanSiEntry  
SEQUENCE    
  adnFrtChanSiIndex INTEGER -2147483648..2147483647
  adnFrtChanSiResourceAvail INTEGER -2147483648..2147483647
  adnFrtChanSiBWThreshold AdnPercent
  adnFrtChanSiCcb STRING
  adnFrtChanSiTraceCntl INTEGER
  adnFrtChanSiTraceSize INTEGER
  adnFrtChanSiTraceArea STRING
  adnFrtChanSiBsiStat STRING
  adnFrtChanSiTsiStat STRING
  adnFrtChanSiBsiCrfa STRING
  adnFrtChanSiTsiCrfa STRING
  adnFrtChanSiTsiBwi STRING
  adnFrtChanSiMinDlyPct AdnPercent
  adnFrtChanSiMinDlyAmt INTEGER
  adnFrtChanSiDlyPersis INTEGER

AdnFrtChanSwEntry  
SEQUENCE    
  adnFrtChanSwFRSI STRING
  adnFrtChanSwIWF STRING
  adnFrtChanSwFRSIMsgtrace STRING

AdnFrtVCSiEntry  
SEQUENCE    
  adnFrtVCSiBsiCrf INTEGER
  adnFrtVCSiBsiState AdnFrtVCStates
  adnFrtVCSiTsiCrf INTEGER
  adnFrtVCSiTsiState AdnFrtVCStates
  adnFrtVCSiLocalSuid INTEGER -2147483648..2147483647
  adnFrtVCSiLocalLpx INTEGER -2147483648..2147483647
  adnFrtVCSiLocalMcmp INTEGER -2147483648..2147483647
  adnFrtVCSiLocalAppl INTEGER -2147483648..2147483647
  adnFrtVCSiLocalData INTEGER -2147483648..2147483647
  adnFrtVCSiLocalFranpSi INTEGER -2147483648..2147483647
  adnFrtVCSiLocalifIndex InterfaceIndex
  adnFrtVCSiRemoteSuid INTEGER -2147483648..2147483647
  adnFrtVCSiRemoteLpx INTEGER -2147483648..2147483647
  adnFrtVCSiRemoteMcmp INTEGER -2147483648..2147483647
  adnFrtVCSiRemoteAppl INTEGER -2147483648..2147483647
  adnFrtVCSiRemoteData INTEGER -2147483648..2147483647
  adnFrtVCSiRemoteFranpSi INTEGER -2147483648..2147483647
  adnFrtVCSiRemoteifIndex InterfaceIndex
  adnFrtVCSiBsiTimer INTEGER -2147483648..2147483647
  adnFrtVCSiTsiTimer INTEGER -2147483648..2147483647
  adnFrtVCSiBsiTimerExpCnt Counter
  adnFrtVCSiTsiTimerExpCnt Counter

AdnFrtVCSwEntry  
SEQUENCE    
  adnFrtVCSwFRSI STRING
  adnFrtVCSwIWF STRING
  adnFrtVCSwFRSIMsgtrace STRING

AdnFrtSiEntry  
SEQUENCE    
  adnFrtSiTraceIndex INTEGER -2147483648..2147483647
  adnFrtSiTraceCntl INTEGER
  adnFrtSiTraceSize INTEGER
  adnFrtSiTraceArea STRING
  adnFrtSiStat STRING
  adnFrtSiStatISMTrace STRING

AdnFrtSwEntry  
SEQUENCE    
  adnFrtSwStatFRSI STRING
  adnFrtSwStatIWF STRING
  adnFrtSwStatISMTrace STRING

AdnFrChanPrivateEntry  
SEQUENCE    
  adnFrChanPrivateSwitch STRING
  adnFrChanPrivateSignalling STRING
  adnFrChanPrivateSwMsgtrace STRING
  adnFrChanPrivateSiMsgtrace STRING

AdnFrVCPrivateEntry  
SEQUENCE    
  adnFrVCPrivateSwitch STRING
  adnFrVCPrivateSignalling STRING
  adnFrVCPrivateSwMsgtrace STRING
  adnFrVCPrivateSiMsgtrace STRING

AdnFrEntry  
SEQUENCE    
  adnFrStatSignalling STRING
  adnFrStatSwitching STRING
  adnFrStatISMTrace STRING

AdnLdrEnvEntry  
SEQUENCE    
  adnLdrSoftStatus STRING
  adnLdrISMTrace STRING

AdnLdrChanEnvEntry  
SEQUENCE    
  adnLdrChanTraceFlag AdnEnableDisabled
  adnLdrChanControlData STRING
  adnLdrChanCmeMsgTrace STRING
  adnLdrChanInmpFuncTrace STRING

AdnIsnaIcIntEntry  
SEQUENCE    
  adnIsnaIcIntifIndex INTEGER -2147483648..2147483647
  adnIsnaIcIntDlci INTEGER -2147483648..2147483647
  adnIsnaIcIpOutPkts Counter
  adnIsnaIcIpInPkts Counter
  adnIsnaIcIssOutPkts Counter
  adnIsnaIcIssInPkts Counter
  adnIsnaIcIcmpIntPkts Counter
  adnIsnaIcIcmpExtPkts Counter
  adnIsnaIcIpOutDiscards Counter
  adnIsnaIcIpInDiscards Counter
  adnIsnaIcIcbMsgtrace STRING

AdnIsnaIpEntry  
SEQUENCE    
  adnIsnaIpIndex INTEGER -2147483648..2147483647
  adnIsnaIpNumOfLpx Counter
  adnIsnaIpNumOfInterface Counter
  adnIsnaIpNumOfVc Counter
  adnIsnaIpIpOutPkts Counter
  adnIsnaIpIpInPkts Counter
  adnIsnaIpIpDiscards Counter
  adnIsnaIpIpomOutPkts Counter
  adnIsnaIpIpomInPkts Counter
  adnIsnaIpIpomDiscards Counter
  adnIsnaIpRdssOutPkts Counter
  adnIsnaIpRdssInPkts Counter
  adnIsnaIpRdssDiscards Counter

AdnIsnaIpIirtEntry  
SEQUENCE    
  adnIsnaIpIirtIpaddrs IpAddress
  adnIsnaIpIirtVcNum INTEGER -2147483648..2147483647
  adnIsnaIpIirtIfIndex INTEGER -2147483648..2147483647
  adnIsnaIpIirtLpxNum INTEGER -2147483648..2147483647
  adnIsnaIpIirtSesid INTEGER -2147483648..2147483647
  adnIsnaIpIirtVcState INTEGER

AdnBoardMiscEntry  
SEQUENCE    
  adnBoardMiscISL STRING

AdnMsupCtxType  
INTEGER other(0), chassisCtx(1), boardCtx(2), processorCtx(3), aeiPortCtx(4), atmCtx(5), generalCtx(6), nodeConfigCtx(7), nodeSystCtx(8), sessionCtx(9), cuCtx(10)    

AdnMsupCtxEntry  
SEQUENCE    
  adnMsupCtxType AdnMsupCtxType
  adnMsupCtxIndex INTEGER
  adnMsupCtxAction INTEGER

AdnAtmBoardErrCounterEntry  
SEQUENCE    
  adnAtmBoardErrUFOFCounter Counter
  adnAtmBoardErrUFRFCounter Counter
  adnAtmBoardErrNFOFCounter Counter
  adnAtmBoardErrPHTRAMPCounter Counter
  adnAtmBoardErrNFRFCounter Counter
  adnAtmBoardErrNAVCCounter Counter
  adnAtmBoardErrNAVPCounter Counter
  adnAtmBoardErrRBOFCounter Counter
  adnAtmBoardErrQRP0RAMPCounter Counter
  adnAtmBoardErrQRP0DMACounter Counter
  adnAtmBoardErrQRP0FIFOCounter Counter
  adnAtmBoardErrQRP1RAMPCounter Counter
  adnAtmBoardErrQRP1DMACounter Counter
  adnAtmBoardErrQRP1FIFOCounter Counter
  adnAtmBoardErrQRP2RAMPCounter Counter
  adnAtmBoardErrQRP2DMACounter Counter
  adnAtmBoardErrQRP2FIFOCounter Counter
  adnAtmBoardErrQRP3RAMPCounter Counter
  adnAtmBoardErrQRP3DMACounter Counter
  adnAtmBoardErrQRP3FIFOCounter Counter
  adnAtmBoardErrHMP0LLPCCounter Counter
  adnAtmBoardErrHMP0LHPCCounter Counter
  adnAtmBoardErrHMP0SYNCCounter Counter
  adnAtmBoardErrHMP1LLPCCounter Counter
  adnAtmBoardErrHMP1LHPCCounter Counter
  adnAtmBoardErrHMP1SYNCCounter Counter

AdnAtmBoardTrCounterEntry  
SEQUENCE    
  adnAtmBoardTrHMP0MTCounter Counter
  adnAtmBoardTrHMP1MTCounter Counter
  adnAtmBoardTrFPTMICICounter Gauge

AdnAeiPortErrCounterEntry  
SEQUENCE    
  adnAeiPortErrOOSCounter Counter
  adnAeiPortErrLOSCounter Counter
  adnAeiPortErrNFOFCounter Counter
  adnAeiPortErrIEMRAMPCounter Counter
  adnAeiPortErrCECHCounter Counter
  adnAeiPortErrUCECHCounter Counter
  adnAeiPortErrCRCMA1Counter Counter
  adnAeiPortErrCRCSICCounter Counter
  adnAeiPortErrNPECounter Counter
  adnAeiPortErrRTAGCounter Counter
  adnAeiPortErrNMA1Counter Counter
  adnAeiPortErrEMA1Counter Counter
  adnAeiPortErrNSFOFCounter Counter
  adnAeiPortErrNFWFCounter Counter
  adnAeiPortErrSFWFCounter Counter
  adnAeiPortErrNSFRFCounter Counter
  adnAeiPortErrUSFRFCounter Counter
  adnAeiPortErrUFWFCounter Counter
  adnAeiPortErrUSFOFCounter Counter
  adnAeiPortErrNICICounter Counter
  adnAeiPortErrNCRCCounter Counter
  adnAeiPortErrNAALCounter Counter
  adnAeiPortErrUCRCCounter Counter
  adnAeiPortErrUAALCounter Counter
  adnAeiPortErrURCCounter Counter

AdnAeiPortTrCounterEntry  
SEQUENCE    
  adnAeiPortTrPTPSetRqCounter Counter
  adnAeiPortTrPTMSetRqCounter Counter
  adnAeiPortTrPTPSetRjBCounter Counter
  adnAeiPortTrPTMSetRjBCounter Counter
  adnAeiPortTrPTPSetRjCCounter Counter
  adnAeiPortTrPTMSetRjCCounter Counter
  adnAeiPortTrPTPSetTrCounter Counter
  adnAeiPortTrPTMSetTrCounter Counter
  adnAeiPortTrPTPCnxCounter Gauge
  adnAeiPortTrPTMCnxCounter Gauge
  adnAeiPortTrPTPBWICIRqCounter Counter
  adnAeiPortTrPTMBWICIRqCounter Counter
  adnAeiPortTrPTPBWRjCounter Counter
  adnAeiPortTrPTMBWRjCounter Counter
  adnAeiPortTrPTPICIRjCounter Counter
  adnAeiPortTrPTMICIRjCounter Counter
  adnAeiPortTrPeakBWCounter Gauge
  adnAeiPortTrFPTPICICounter Gauge
  adnAeiPortTrMPriorBWCounter Gauge
  adnAeiPortTrInCellsCounter Counter
  adnAeiPortTrOutCellsCounter Counter

AdnAtmBoardDefEntry  
SEQUENCE    
  adnAtmBoardDefBoardType INTEGER
  adnAtmBoardDefNumber INTEGER
  adnAtmBoardDefEventClass INTEGER
  adnAtmBoardDefBegThreshold INTEGER
  adnAtmBoardDefEndThreshold INTEGER
  adnAtmBoardDefBegTimer INTEGER
  adnAtmBoardDefEndTimer INTEGER
  adnAtmBoardDefSignalling INTEGER
  adnAtmBoardDefErrOrWng INTEGER
  adnAtmBoardDefReportEnable INTEGER

AdnAeiPortDefEntry  
SEQUENCE    
  adnAeiPortDefBoardType INTEGER
  adnAeiPortDefNumber INTEGER
  adnAeiPortDefEventClass INTEGER
  adnAeiPortDefDirection INTEGER
  adnAeiPortDefBegThreshold INTEGER
  adnAeiPortDefEndThreshold INTEGER
  adnAeiPortDefBegTimer INTEGER
  adnAeiPortDefEndTimer INTEGER
  adnAeiPortDefSignalling INTEGER
  adnAeiPortDefErrOrWng INTEGER
  adnAeiPortDefReportEnable INTEGER

AdnAtmLineDefEntry  
SEQUENCE    
  adnAtmLineDefLineType INTEGER
  adnAtmLineDefNumber INTEGER
  adnAtmLineDefEventClass INTEGER
  adnAtmLineDefUseInPerfCalcul INTEGER
  adnAtmLineDefPerfType INTEGER
  adnAtmLineDefPerfThreshold INTEGER
  adnAtmLineDefDirection INTEGER
  adnAtmLineDefBegThreshold INTEGER
  adnAtmLineDefEndThreshold INTEGER
  adnAtmLineDefBegTimer INTEGER
  adnAtmLineDefEndTimer INTEGER
  adnAtmLineDefSignalling INTEGER
  adnAtmLineDefErrOrWng INTEGER
  adnAtmLineDefReportEnable INTEGER
  adnAtmLineDefHierarchy INTEGER -2147483648..2147483647
  adnAtmLineDefPerfLevel INTEGER
  adnAtmLineDefFailureSig INTEGER
  adnAtmLineDefDefectSig INTEGER

AdnAtmLinePerfEntry  
SEQUENCE    
  adnAtmLinePerfLineType INTEGER
  adnAtmLinePerfBlocksPerSec INTEGER
  adnAtmLinePerfLowErrBlockThr INTEGER
  adnAtmLinePerfHighErrBlockThr INTEGER
  adnAtmLinePerfBegUnAvailable INTEGER
  adnAtmLinePerfEndUnAvailable INTEGER
  adnAtmLinePerfConsSeverErrSec INTEGER
  adnAtmLinePerfHighBBE15Thr INTEGER
  adnAtmLinePerfHighES15Thr INTEGER
  adnAtmLinePerfHighSES15Thr INTEGER
  adnAtmLinePerfLowBBE15Thr INTEGER
  adnAtmLinePerfLowES15Thr INTEGER
  adnAtmLinePerfLowSES15Thr INTEGER
  adnAtmLinePerfBBE24Thr INTEGER
  adnAtmLinePerfES24Thr INTEGER
  adnAtmLinePerfSES24Thr INTEGER

AdnHscBoardTrMgtEnvEntry  
SEQUENCE    
  adnHscBoardTrMgtEnvOBLineAssig INTEGER
  adnHscBoardTrMgtEnvMOBEFCIOffTh INTEGER
  adnHscBoardTrMgtEnvLOBEFCIOffTh INTEGER

AdnAseBoardTrMgtEnvEntry  
SEQUENCE    
  adnAseBoardTrMgtEnvAeiPort INTEGER
  adnAseBoardTrMgtEnvAeiSpeed INTEGER

AdnCongMgmtLTEntry  
SEQUENCE    
  adnCongMgmtLTTraceFlag AdnEnableDisabled
  adnCongMgmtFreeBd2CongLevelTable STRING
  adnCongMgmtProcUtilization INTEGER -2147483648..2147483647

AdnCongMgmtChanEnvEntry  
SEQUENCE    
  adnCongMgmtChannel STRING
  adnCongMgmtChanDiscMsgtrace STRING
  adnCongMgmtChanAppliMsgTrace STRING
  adnCongMgmtChanTraceFlag AdnEnableDisabled
  adnCongMgmtChanUtilization INTEGER -2147483648..2147483647
  adnCongMgmtChanEgressMaxCUF INTEGER -2147483648..2147483647
  adnCongMgmtChanMinTPSF INTEGER -2147483648..2147483647

AdnCongMgmtVCEnvEntry  
SEQUENCE    
  adnCongMgmtVCcb STRING
  adnCongMgmtVCLineDataTrace STRING
  adnCongMgmtVCBusDataTrace STRING
  adnCongMgmtVCTraceEnable AdnEnableDisabled
  adnCongMgmtVCStateMachineTrace STRING

AdnCongMgmtLTTraceEntry  
SEQUENCE    
  adnCongMgmtLTCQtrace STRING
  adnCongMgmtTraceIndex INTEGER -2147483648..2147483647

AdnLapPrivateEntry  
SEQUENCE    
  adnLapPrivateTraceL1flag INTEGER
  adnLapPrivateTraceL1buffer STRING
  adnLapPrivateTraceL3flag INTEGER
  adnLapPrivateTraceL3buffer STRING
  adnLapPrivateTraceNMGSflag INTEGER
  adnLapPrivateTraceNMGSbuffer STRING
  adnLapFlowRASInfoflag INTEGER
  adnLapFlowRASInfo STRING

AdnSsupCUDbgPCBEntry  
SEQUENCE    
  adnSsupCUDbgPCBData STRING

AdnSsupOMDbgPCBEntry  
SEQUENCE    
  adnCouplerIndex AdnCouplerIndex
  adnSsupOMDbgPCBData STRING

AdnSsupLTDbgPCBEntry  
SEQUENCE    
  adnSsupLTDbgPCBData STRING

AdnAAFDMaintEntry  
SEQUENCE    
  adnAAFDContxt1 STRING
  adnAAFDContxt2 STRING
  adnAAFDContxt3 STRING
  adnAAFDContxt4 STRING
  adnAAFDContxt5 STRING
  adnAAFDContxt6 STRING
  adnAAFDContxt7 STRING

AdnAAFDVCCMaintEntry  
SEQUENCE    
  adnAAFDVCCContext1 STRING
  adnAAFDVCCContext2 STRING
  adnAAFDVCCContext3 STRING

AdnPssBandWEntry  
SEQUENCE    
  adnPssAvailBW STRING
  adnpssifindex INTEGER -2147483648..2147483647

AdnPssTraceHdrEntry  
SEQUENCE    
  adnPssPrintFlag INTEGER
  adnPssFromFrtBuf STRING
  adnPssToFrtBuf STRING

AdnPssTraceValEntry  
SEQUENCE    
  adnPssTraceIndex INTEGER
  adnPssTraceValue STRING

AdnRtsagtPrintFlagHdrEntry  
SEQUENCE    
  adnRtsagtPrintFlag INTEGER

AdnRtsagtTraceEntry  
SEQUENCE    
  adnRtsagtTraceIndex INTEGER
  adnRtsagtTraceValue STRING

AdnRtsagtLinkCtrlEntry  
SEQUENCE    
  adnRtsagtIfIndex INTEGER -2147483648..2147483647
  adnRtsagtLpx INTEGER -2147483648..2147483647
  adnRtsagtUserNetFlag INTEGER
  adnRtsagtHssTpx INTEGER
  adnRtsagtSigIfState INTEGER
  adnRtsagtL2IfState INTEGER
  adnRtsagtMhIfState INTEGER
  adnRtsagtL3IfState INTEGER
  adnRtsagtLhMainState INTEGER
  adnRtsagtSiCcb INTEGER -2147483648..2147483647
  adnRtsagtLtLpx INTEGER -2147483648..2147483647
  adnRtsagtMemLpx INTEGER -2147483648..2147483647
  adnRtsagtAtmSiIfap INTEGER -2147483648..2147483647
  adnRtsagtAtmSiSuid INTEGER -2147483648..2147483647
  adnRtsagtL3MaxPktSize INTEGER -2147483648..2147483647
  adnRtsagtPeerVersion INTEGER -2147483648..2147483647
  adnRtsagtHeartBeatTime INTEGER -2147483648..2147483647
  adnRtsagtLinkDeadTime INTEGER -2147483648..2147483647
  adnRtsagtSigIfInfo STRING
  adnRtsagtL2IfInfo STRING
  adnRtsagtL3IfInfo STRING
  adnRtsagtMhIfInfo STRING
  adnRtsagtLhMainInfo STRING
  adnRtsagtLhTimerInfo STRING
  adnRtsagtNextLcb INTEGER -2147483648..2147483647
  adnRtsagtPrevLcb INTEGER -2147483648..2147483647
  adnRtsagtTimerDurations INTEGER
  adnRtsagtLayer2IdCcb INTEGER -2147483648..2147483647
  adnRtsagtLayer2RefCcb INTEGER -2147483648..2147483647
  adnRtsagtChannelType INTEGER
  adnRtsagtLineMetric STRING
  adnRtsagtLinkDeadFlag INTEGER

AdnRtsagtLocalAddrEntry  
SEQUENCE    
  adnRtsagtLocalAddrIndex INTEGER -2147483648..2147483647
  adnRtsagtLocalAddrBlkHdr STRING
  adnRtsagtLocalAddrBlkCard STRING

AdnRtsagtTimerHdrEntry  
SEQUENCE    
  adnRtsagtTimerIndex INTEGER -2147483648..2147483647
  adnRtsagtTimerDuration INTEGER -2147483648..2147483647
  adnRtsagtTimerPurpose INTEGER -2147483648..2147483647
  adnRtsagtTimerToBeDeleted INTEGER -2147483648..2147483647
  adnRtsagtTimerNext INTEGER -2147483648..2147483647
  adnRtsagtTimerPrevious INTEGER -2147483648..2147483647

AdnRtsmgrTraceEntry  
SEQUENCE    
  adnRtsmgrTraceIndex INTEGER
  adnRtsmgrTraceValue STRING

AdnCvsiHssEntry  
SEQUENCE    
  adnCvsiHssIndex INTEGER -2147483648..2147483647
  adnCvsiHssTraceCntl INTEGER
  adnCvsiHssTraceArea STRING
  adnCvsiHssCounters STRING
  adnCvsiHssGlobalVars STRING
  adnCvsiHssPrintCntl INTEGER
  adnCvsiHssVcActive INTEGER -2147483648..2147483647

AdnRdssOption  
INTEGER lpxlevel(1), interfacelevel(2), vclevel(3), other(255)    

AdnRdssCommandType  
INTEGER add(1), delete(2), update(3), internal(255)    

AdnRdssStatus  
INTEGER up(1), down(2)    

AdnRdssRegistrationEntry  
SEQUENCE    
  adnRdssRegLpxIndex INTEGER -2147483648..2147483647
  adnRdssIcsRef INTEGER -2147483648..2147483647
  adnRdssSessionId INTEGER
  adnRdssCongestionFlag INTEGER
  adnRdssFatSequenceNum INTEGER -2147483648..2147483647
  adnRdssGatSequenceNum INTEGER -2147483648..2147483647
  adnRdssMatSequenceNum INTEGER -2147483648..2147483647
  adnRdssAckFlags INTEGER -2147483648..2147483647
  adnRdssNextHopLastSequenceNum INTEGER -2147483648..2147483647
  adnRdssLatLastSequenceNum INTEGER -2147483648..2147483647
  adnRdssMatLastSequenceNum INTEGER -2147483648..2147483647
  adnRdssTransmitMsgBufId INTEGER -2147483648..2147483647
  adnRdssGatTableTraverseStatus INTEGER -2147483648..2147483647
  adnRdssGatTableTraverseLpxKey INTEGER -2147483648..2147483647
  adnRdssTypeOfTableRequested INTEGER -2147483648..2147483647
  adnRdssGatTableTraverseStartKey INTEGER -2147483648..2147483647
  adnRdssGatTableTraverseEndKey INTEGER -2147483648..2147483647
  adnRdssGatMsgQueueStartPointer INTEGER -2147483648..2147483647
  adnRdssFatEntranceKey INTEGER -2147483648..2147483647

AdnRdssForwardingEntry  
SEQUENCE    
  adnRdssDestIpAddress IpAddress
  adnRdssFatMask INTEGER
  adnRdssFatFlag INTEGER
  adnRdssFatCommand AdnRdssCommandType
  adnRdssFatStatusAckCnt INTEGER
  adnRdssNextHopIpAddr IpAddress
  adnRdssFatLowerFsm INTEGER -2147483648..2147483647
  adnRdssFatMidFsm INTEGER -2147483648..2147483647
  adnRdssFatUpperFsm INTEGER -2147483648..2147483647

AdnRdssGatIfindexEntry  
SEQUENCE    
  adnRdssGatIfindexLpxIndex INTEGER -2147483648..2147483647
  adnRdssGatIfIndex INTEGER -2147483648..2147483647
  adnRdssGatIfindexOption AdnRdssOption
  adnRdssGatIfindexCommandType AdnRdssCommandType
  adnRdssGatIfindexStatus AdnRdssStatus
  adnRdssGatIfLiiAddress IpAddress
  adnRdssGatIfMask INTEGER
  adnRdssGatIfServiceType INTEGER
  adnRdssGatIfMtu INTEGER
  adnRdssGatIfPrivateData INTEGER
  adnRdssGatIfBroadcastAddr IpAddress
  adnRdssGatIfCost INTEGER -2147483648..2147483647

AdnRdssGatVcEntry  
SEQUENCE    
  adnRdssGatVcNextHopAddr IpAddress
  adnRdssGatVcLpx INTEGER -2147483648..2147483647
  adnRdssGatVcIfIndex INTEGER -2147483648..2147483647
  adnRdssGatVcVpiVciOrDlci INTEGER -2147483648..2147483647
  adnRdssGatVcOption AdnRdssOption
  adnRdssGatVcCommandType AdnRdssCommandType
  adnRdssGatVcStatus AdnRdssStatus
  adnRdssGatVcServiceType INTEGER
  adnRdssGatVcCost INTEGER -2147483648..2147483647
  adnRdssGatVcLiiAddress IpAddress

AdnRdssTraceEntry  
SEQUENCE    
  adnRdssTraceLpxIndex INTEGER -2147483648..2147483647
  adnRdssTraceIndex INTEGER
  adnRdssTraceValue STRING

AdnIpRouteNetstatEntry  
SEQUENCE    
  adnIpRouteNetstatIndex INTEGER -2147483648..2147483647
  adnIpRouteNetstatIfconfig DisplayString
  adnIpRouteNetstatRoutes DisplayString
  adnIpRouteNetstatProtStats DisplayString
  adnIpRouteNetstatNetSockets DisplayString
  adnIpRouteNetstatNetConnec DisplayString
  adnIpRouteNetstatNetNum DisplayString

AdnIpRouteDiagEntry  
SEQUENCE    
  adnIpRouteDiagIndex INTEGER -2147483648..2147483647
  adnIpRouteDiagPrintFlags INTEGER -2147483648..2147483647

Defined Values

adnEnvMIB 1.3.6.1.4.1.637.3.2
OBJECT IDENTIFIER    

adnFranpTrunkEnvMIB 1.3.6.1.4.1.637.3.1.8.5.1
OBJECT IDENTIFIER    

adnFrtChanSiTable 1.3.6.1.4.1.637.3.1.8.5.1.1
This table is internal for use by FRANP Signalling for the purpose of debugging.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnFrtChanSiEntry

adnFrtChanSiEntry 1.3.6.1.4.1.637.3.1.8.5.1.1.1
An entry in the Signalling Trunk Channel Table. There will be one entry for each FRANP Signalling Trunk channel configured. This table will also be indexed by adnFrtChanSiIndex in order to be able to access individual trace entries.
OBJECT-TYPE    
  AdnFrtChanSiEntry  

adnFrtChanSiIndex 1.3.6.1.4.1.637.3.1.8.5.1.1.1.1
This entry represents the current instance or index of the table. It is provided in order to be able to dump each instance of each object.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnFrtChanSiResourceAvail 1.3.6.1.4.1.637.3.1.8.5.1.1.1.2
This timer specifies the amount of time to wait for a resource available message to be sent to FRANP Path Select SwBB. If the timer expires, then the message is transmitted. This is expressed in SECONDS. The timer may be set by SNMP command.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnFrtChanSiBWThreshold 1.3.6.1.4.1.637.3.1.8.5.1.1.1.3
The threshold value is specified as a percentage of the BAT. If the available bandwidth drops below this threshold, the resource available message sent to FRANP Path Select component. The value may be set by SNMP command.
OBJECT-TYPE    
  AdnPercent  

adnFrtChanSiCcb 1.3.6.1.4.1.637.3.1.8.5.1.1.1.4
This is the internal BINARY trace area for call control information trace area, maintained by FRANP_SI. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrtChanSiTraceCntl 1.3.6.1.4.1.637.3.1.8.5.1.1.1.5
This object provides a mechanism for controlling Franp Signalling ability to enable/disable tracing data from its Bus side, Trunk side, and Ism side. The following are the possible values it can hold. 1 - Trace activity enabled (normally is defaulted on) 2 - Trace activity disabled
OBJECT-TYPE    
  INTEGER  

adnFrtChanSiTraceSize 1.3.6.1.4.1.637.3.1.8.5.1.1.1.6
This object provides a mechanism for defining the number of entries the Franp Signalling trace area can have. Be aware when issuing a set command to modify this value, any existing trace data will be lost to make room for the new trace block size.
OBJECT-TYPE    
  INTEGER  

adnFrtChanSiTraceArea 1.3.6.1.4.1.637.3.1.8.5.1.1.1.7
This is the internal BINARY message trace entry maintained by FRANP_SI for its 3 main interfaces, (Bus side, Trunk side, and Ism side). This entry is instantiated by AdnFrtChanSiInstance index that comprises the entire trace area table. The FRANP Signalling software is implemented as a Finite State Machine, and all message events received are stored here. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrtChanSiBsiStat 1.3.6.1.4.1.637.3.1.8.5.1.1.1.8
This is the internal BINARY statistic trace table maintained by FRANP_SI for this Bus Side interface. The Franp Signalling software is implemented as a Finite State Machine, and all statistics collected are stored here. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrtChanSiTsiStat 1.3.6.1.4.1.637.3.1.8.5.1.1.1.9
This is the internal BINARY statistic trace table maintained by FRANP_SI for this Trunk Side interface. The Franp Signalling software is implemented as a Finite State Machine, and all statistics collected are stored here. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrtChanSiBsiCrfa 1.3.6.1.4.1.637.3.1.8.5.1.1.1.10
This is the internal BINARY call reference active trace maintained by FRANP_SI for this Bus Side interface. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrtChanSiTsiCrfa 1.3.6.1.4.1.637.3.1.8.5.1.1.1.11
This is the internal BINARY call reference active trace maintained by FRANP_SI for this Trunk Side interface. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrtChanSiTsiBwi 1.3.6.1.4.1.637.3.1.8.5.1.1.1.12
This is the internal BINARY Bandwidth Information table maintained by FRANP_SI for this Trunk Side interface. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrtChanSiMinDlyPct 1.3.6.1.4.1.637.3.1.8.5.1.1.1.13
This field is used to calculate the minimum delay change a periodic delay measurement can consider to be significant. Such significant delay changes may result in a new delay reported to ROUTES. The minimum delay change is calulated by multiplying this field as a percentage times the delay measured immediately after a RESTART/RESTART ACK exchange.
OBJECT-TYPE    
  AdnPercent  

adnFrtChanSiMinDlyAmt 1.3.6.1.4.1.637.3.1.8.5.1.1.1.14
If the minimum delay change calculated using adnFrtChanSiMinDlyPct is less than this field, the minimum delay change a periodic delay measurement can consider to be significant is set equal to this field instead of the calculated value.
OBJECT-TYPE    
  INTEGER  

adnFrtChanSiDlyPersis 1.3.6.1.4.1.637.3.1.8.5.1.1.1.15
Before a periodic delay measurement can report a new delay value to ROUTES, a specified number of consecutive measurements must be significantly high OR a specified number of consecutive measurements must be significantly low. This field defines that specified number of consecutive measurements.
OBJECT-TYPE    
  INTEGER  

adnFrtChanSwTable 1.3.6.1.4.1.637.3.1.8.5.1.2
This table contains internal channel level information for FRANP_SW. There is no existing standard MIB for Alcatel internal network protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnFrtChanSwEntry

adnFrtChanSwEntry 1.3.6.1.4.1.637.3.1.8.5.1.2.1
An entry in the internal FRANP Switching Channel Table. There will be one entry for each FRANP channel configured
OBJECT-TYPE    
  AdnFrtChanSwEntry  

adnFrtChanSwFRSI 1.3.6.1.4.1.637.3.1.8.5.1.2.1.3
This is the BINARY internal channel structure maintained by FRSI portion of FRANP_SW for this channel. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrtChanSwIWF 1.3.6.1.4.1.637.3.1.8.5.1.2.1.4
This is the BINARY internal channel structure maintained by TPX/F IWF portion of FRANP_SW for this channel. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrtChanSwFRSIMsgtrace 1.3.6.1.4.1.637.3.1.8.5.1.2.1.5
This is the internal BINARY message trace table maintained by FRSI portion of FRANP_SW for this channel. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrtVCSiTable 1.3.6.1.4.1.637.3.1.8.5.1.3
This is the PVC table for FRANP trunk protocol.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnFrtVCSiEntry

adnFrtVCSiEntry 1.3.6.1.4.1.637.3.1.8.5.1.3.1
PVC table entry
OBJECT-TYPE    
  AdnFrtVCSiEntry  

adnFrtVCSiBsiCrf 1.3.6.1.4.1.637.3.1.8.5.1.3.1.1
This is the Bus Side Interface call reference associated with the VC.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnFrtVCSiBsiState 1.3.6.1.4.1.637.3.1.8.5.1.3.1.2
Define here are the state that are implemented and supported for the FRANP Signalling bus Side Interface.
OBJECT-TYPE    
  AdnFrtVCStates  

adnFrtVCSiTsiCrf 1.3.6.1.4.1.637.3.1.8.5.1.3.1.3
This is the Trunk Side Interface call reference associated with the VC.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnFrtVCSiTsiState 1.3.6.1.4.1.637.3.1.8.5.1.3.1.4
Define here are the state that are implemented and supported for the FRANP Signalling Trunk Side Interface.
OBJECT-TYPE    
  AdnFrtVCStates  

adnFrtVCSiLocalSuid 1.3.6.1.4.1.637.3.1.8.5.1.3.1.5
This is the local Suid associated with the VC.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnFrtVCSiLocalLpx 1.3.6.1.4.1.637.3.1.8.5.1.3.1.6
This is the local LPX associated with the VC.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnFrtVCSiLocalMcmp 1.3.6.1.4.1.637.3.1.8.5.1.3.1.7
This is the local Maximum Congestion Monitoring Period associated with the VC.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnFrtVCSiLocalAppl 1.3.6.1.4.1.637.3.1.8.5.1.3.1.8
This is the local Application reference number associated with the VC.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnFrtVCSiLocalData 1.3.6.1.4.1.637.3.1.8.5.1.3.1.9
This is the local Data Handler reference number associated with the VC.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnFrtVCSiLocalFranpSi 1.3.6.1.4.1.637.3.1.8.5.1.3.1.10
This is the local Franp Signalling reference number associated with the VC.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnFrtVCSiLocalifIndex 1.3.6.1.4.1.637.3.1.8.5.1.3.1.11
This indicates the ifindex of the remote Chassis/Slot/ Port/Channel.
OBJECT-TYPE    
  InterfaceIndex  

adnFrtVCSiRemoteSuid 1.3.6.1.4.1.637.3.1.8.5.1.3.1.12
This is the remote Suid associated with the VC.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnFrtVCSiRemoteLpx 1.3.6.1.4.1.637.3.1.8.5.1.3.1.13
This is the remote Lpx associated with the VC.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnFrtVCSiRemoteMcmp 1.3.6.1.4.1.637.3.1.8.5.1.3.1.14
This is the remote Maximum Congestion Monitoring period associated with the VC.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnFrtVCSiRemoteAppl 1.3.6.1.4.1.637.3.1.8.5.1.3.1.15
This is the remote Application reference number associated with the VC.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnFrtVCSiRemoteData 1.3.6.1.4.1.637.3.1.8.5.1.3.1.16
This is the remote Data Handler reference number associated with the VC.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnFrtVCSiRemoteFranpSi 1.3.6.1.4.1.637.3.1.8.5.1.3.1.17
This is the remote Franp Signalling reference number associated with the VC.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnFrtVCSiRemoteifIndex 1.3.6.1.4.1.637.3.1.8.5.1.3.1.18
This indicates the ifindex of the remote Chassis/Slot/ Port/Channel.
OBJECT-TYPE    
  InterfaceIndex  

adnFrtVCSiBsiTimer 1.3.6.1.4.1.637.3.1.8.5.1.3.1.19
This is the timer ID that is currently running for this VC.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnFrtVCSiTsiTimer 1.3.6.1.4.1.637.3.1.8.5.1.3.1.20
This is the timer ID that is currently running for this VC.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnFrtVCSiBsiTimerExpCnt 1.3.6.1.4.1.637.3.1.8.5.1.3.1.21
This is the number of times this Bus Side Interface timer ID has expired.
OBJECT-TYPE    
  Counter  

adnFrtVCSiTsiTimerExpCnt 1.3.6.1.4.1.637.3.1.8.5.1.3.1.22
This is the number of times this trunk Side Interface timer ID has expired.
OBJECT-TYPE    
  Counter  

adnFrtVCSwTable 1.3.6.1.4.1.637.3.1.8.5.1.4
This is the internal VC table for FRANP Switching.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnFrtVCSwEntry

adnFrtVCSwEntry 1.3.6.1.4.1.637.3.1.8.5.1.4.1
PVC table entry
OBJECT-TYPE    
  AdnFrtVCSwEntry  

adnFrtVCSwFRSI 1.3.6.1.4.1.637.3.1.8.5.1.4.1.1
This is the BINARY internal VC structure maintained by the FRSI portion of FRANP_SW. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrtVCSwIWF 1.3.6.1.4.1.637.3.1.8.5.1.4.1.2
This is the BINARY internal VC structure maintained by the TPX/F IWF portion of FRANP_SW. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrtVCSwFRSIMsgtrace 1.3.6.1.4.1.637.3.1.8.5.1.4.1.3
This is the internal BINARY message trace table maintained by the FRSI portion of FRANP_SW for this VC. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrtSiTable 1.3.6.1.4.1.637.3.1.8.5.1.5
This is the FRANP Signalling table. It will exists once per FRANP Signalling instance on each LT.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnFrtSiEntry

adnFrtSiEntry 1.3.6.1.4.1.637.3.1.8.5.1.5.1
One instance of the adnFrtSiTable. There will be one instance for each FRANP Signalling on each LT.
OBJECT-TYPE    
  AdnFrtSiEntry  

adnFrtSiTraceIndex 1.3.6.1.4.1.637.3.1.8.5.1.5.1.1
This entry represents the current instance or index. It is provided in order to be able to dump each Franp_si trace instance of each object.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnFrtSiTraceCntl 1.3.6.1.4.1.637.3.1.8.5.1.5.1.2
This object provides a mechanism for controlling Franp Signalling ability to enable/disable tracing data from its Bus side, Trunk side, and Ism side. The following are the possible values it can hold. 1 - Trace activity enabled 2 - Trace activity disabled (default setting)
OBJECT-TYPE    
  INTEGER  

adnFrtSiTraceSize 1.3.6.1.4.1.637.3.1.8.5.1.5.1.3
This object provides a mechanism for defining the number of entries the Franp Signalling trace area can have. Be aware when issuing a set command to modify this value, any existing trace data will be lost to make room for the new trace block size.
OBJECT-TYPE    
  INTEGER  

adnFrtSiTraceArea 1.3.6.1.4.1.637.3.1.8.5.1.5.1.4
This is the internal BINARY message trace entry maintained by FRANP_SI for its 3 main interfaces, (Bus side, Trunk side, and Ism side). This entry is instanciated by AdnFrtSiInstance index that comprises the entire trace area table. The FRANP Signalling software is implemented as a Finite State Machine, and all message events received are stored here. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrtSiStat 1.3.6.1.4.1.637.3.1.8.5.1.5.1.5
This is the internal FRANP_SI data structure. This will contain internal error counters and structures. This is the internal table maintained by FRANP_SI.
OBJECT-TYPE    
  STRING  

adnFrtSiStatISMTrace 1.3.6.1.4.1.637.3.1.8.5.1.5.1.6
This is the ISM message trace area. All ISM Messages transmitted and received by FRANP_SI are stored here. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrtSwTable 1.3.6.1.4.1.637.3.1.8.5.1.6
This is the FRANP_SW table. It will exists once per FRANP_SW instance on each LT.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnFrtSwEntry

adnFrtSwEntry 1.3.6.1.4.1.637.3.1.8.5.1.6.1
One instance of the adnFrtSwTable. There will be one instance for each FRANP_SW on each LT.
OBJECT-TYPE    
  AdnFrtSwEntry  

adnFrtSwStatFRSI 1.3.6.1.4.1.637.3.1.8.5.1.6.1.1
This is the internal FRSI data structure. This will contain internal error counters and structures. This is the internal table maintained by FRSI component of FRANP_SW.
OBJECT-TYPE    
  STRING  

adnFrtSwStatIWF 1.3.6.1.4.1.637.3.1.8.5.1.6.1.2
This is the internal IWF data structure. This will contain internal error counters and structures. This is the internal table maintained by IWF component of FRANP_SW.
OBJECT-TYPE    
  STRING  

adnFrtSwStatISMTrace 1.3.6.1.4.1.637.3.1.8.5.1.6.1.3
This is the ISM message trace area. All ISM Messages transmitted and received by FRSI component of FRANP_SW are stored here. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrsEnvMIB 1.3.6.1.4.1.637.3.1.8.5.2
OBJECT IDENTIFIER    

adnFrChanPrivateTable 1.3.6.1.4.1.637.3.1.8.5.2.1
This table is an extension of the Frame Relay Management Signalling Group table and the Frame Relay Logical Port Group table from RFC1604.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnFrChanPrivateEntry

adnFrChanPrivateEntry 1.3.6.1.4.1.637.3.1.8.5.2.1.1
An entry in the Channel Table. There will be one entry for each FRS channel configured
OBJECT-TYPE    
  AdnFrChanPrivateEntry  

adnFrChanPrivateSwitch 1.3.6.1.4.1.637.3.1.8.5.2.1.1.1
This is the BINARY internal channel structure maintained by FRS_SW. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrChanPrivateSignalling 1.3.6.1.4.1.637.3.1.8.5.2.1.1.2
This is the BINARY internal channel structure maintained by FRS_SI. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrChanPrivateSwMsgtrace 1.3.6.1.4.1.637.3.1.8.5.2.1.1.3
This is the internal BINARY message trace table maintained by FRS_SW for this channel. The FRS_SW software is implemented as a Finite State Machine, and all events received and their corresponding states are stored here. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrChanPrivateSiMsgtrace 1.3.6.1.4.1.637.3.1.8.5.2.1.1.4
This is the internal BINARY message trace table maintained by Channel Management portion of FRS_SI for this VC. The Channel Management software is implemented as a Finite State Machine, and all events received and their corresponding states are stored here. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrVCPrivateTable 1.3.6.1.4.1.637.3.1.8.5.2.2
This is the PVC table extensions. The PVC End-Point Table in RFC1604 is not sufficient for our HSS network. These fields are the extensions to it
OBJECT-TYPE    
  SEQUENCE OF  
    AdnFrVCPrivateEntry

adnFrVCPrivateEntry 1.3.6.1.4.1.637.3.1.8.5.2.2.1
PVC table entry
OBJECT-TYPE    
  AdnFrVCPrivateEntry  

adnFrVCPrivateSwitch 1.3.6.1.4.1.637.3.1.8.5.2.2.1.1
This is the BINARY internal PVC structure maintained by FRS_SW. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrVCPrivateSignalling 1.3.6.1.4.1.637.3.1.8.5.2.2.1.2
This is the BINARY internal PVC structure maintained by FRS_SI. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrVCPrivateSwMsgtrace 1.3.6.1.4.1.637.3.1.8.5.2.2.1.3
This is the internal BINARY message trace table maintained by FRS_SW for this VC. The FRS_SW software is implemented as a Finite State Machine, and all events received and their corresponding states are stored here. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrVCPrivateSiMsgtrace 1.3.6.1.4.1.637.3.1.8.5.2.2.1.4
This is the internal BINARY message trace table maintained by PVC handler portion of FRS_SI for this VC. The PVC handler software is implemented as a Finite State Machine, and all events received and their corresponding states are stored here. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnFrTable 1.3.6.1.4.1.637.3.1.8.5.2.3
This is the FRS table. It will exists once per FRS instance on each LT.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnFrEntry

adnFrEntry 1.3.6.1.4.1.637.3.1.8.5.2.3.1
One instance of the adnFRSTable. There will be one instance for each FRS on each LT.
OBJECT-TYPE    
  AdnFrEntry  

adnFrStatSignalling 1.3.6.1.4.1.637.3.1.8.5.2.3.1.1
This is the internal FRS data structure. This will contain internal error counters and structures. This is the internal table maintained by FRS_SI.
OBJECT-TYPE    
  STRING  

adnFrStatSwitching 1.3.6.1.4.1.637.3.1.8.5.2.3.1.2
This is the internal FRS data structure. This will contain internal error counters and structures. This is the internal table maintained by FRS_SW.
OBJECT-TYPE    
  STRING  

adnFrStatISMTrace 1.3.6.1.4.1.637.3.1.8.5.2.3.1.3
This is the ISM message trace area. All ISM Messages transmitted and received by FRS_SI are stored here.
OBJECT-TYPE    
  STRING  

adnLdrEnvMIB 1.3.6.1.4.1.637.3.1.8.5.3
OBJECT IDENTIFIER    

adnLdrEnvTable 1.3.6.1.4.1.637.3.1.8.5.3.1
This is the LDR software building block table. Each LDR on each LT has one. It mainly contains debug information.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnLdrEnvEntry

adnLdrEnvEntry 1.3.6.1.4.1.637.3.1.8.5.3.1.1
There will be one instance for each LDR on each LT.
OBJECT-TYPE    
  AdnLdrEnvEntry  

adnLdrSoftStatus 1.3.6.1.4.1.637.3.1.8.5.3.1.1.1
This is the internal LDR data structure. It contains the internal error counters and other information of the LDR Software status. This is the internal table maintained by LDR.
OBJECT-TYPE    
  STRING  

adnLdrISMTrace 1.3.6.1.4.1.637.3.1.8.5.3.1.1.2
This is the ISM message trace area. All ISM Messages transmitted and received by FRS_SI are stored here.
OBJECT-TYPE    
  STRING  

adnLdrChanEnvTable 1.3.6.1.4.1.637.3.1.8.5.3.2
This table contains internal channel structure maintained by LDR. It is used for maintenance purposes only.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnLdrChanEnvEntry

adnLdrChanEnvEntry 1.3.6.1.4.1.637.3.1.8.5.3.2.1
An entry in the LDR Channel Environment Table. There will be one entry for each LDR channel configured.
OBJECT-TYPE    
  AdnLdrChanEnvEntry  

adnLdrChanTraceFlag 1.3.6.1.4.1.637.3.1.8.5.3.2.1.1
Flag indicating if trace is enabled.
OBJECT-TYPE    
  AdnEnableDisabled  

adnLdrChanControlData 1.3.6.1.4.1.637.3.1.8.5.3.2.1.2
This is the BINARY channel control block data structure maintained by the LDR. It is placed here for maintenance purposes only
OBJECT-TYPE    
  STRING  

adnLdrChanCmeMsgTrace 1.3.6.1.4.1.637.3.1.8.5.3.2.1.3
This is the trace area for LDR and CME-SUP interface. The information of messages that sent and received by the LDR are stored here.
OBJECT-TYPE    
  STRING  

adnLdrChanInmpFuncTrace 1.3.6.1.4.1.637.3.1.8.5.3.2.1.4
This is the trace area for LDR and INMP Library interface. Function call information (LDR functions called by INMP Library, and functions in INMP Library called by LDR) are recorded here.
OBJECT-TYPE    
  STRING  

adnIsnaEnvMib 1.3.6.1.4.1.637.3.1.8.5.4
OBJECT IDENTIFIER    

adnIsnaIcIntTable 1.3.6.1.4.1.637.3.1.8.5.4.1
This is the ISNA Internal Connection diagnostic table definitions. It is an extension to the adnIsnaIcTable definitions.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnIsnaIcIntEntry

adnIsnaIcIntEntry 1.3.6.1.4.1.637.3.1.8.5.4.1.1
Internal ISNA IC level diagnostic table. Uses indeces 'adnIsnaIcifIndex and 'adnIsnaIcDlci' defined in 'adnIsnaIcTable' table.
OBJECT-TYPE    
  AdnIsnaIcIntEntry  

adnIsnaIcIntifIndex 1.3.6.1.4.1.637.3.1.8.5.4.1.1.1
This object defines the 1st half of the Internal Connection defined in the 'adnIsnaIcTable' and is one to one mapping to 'adnIsnaIcifIndex' object.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnIsnaIcIntDlci 1.3.6.1.4.1.637.3.1.8.5.4.1.1.2
This object defines the 2nd half of the Internal Connection defined in the 'adnIsnaIcTable' and is one to one mapping to 'adnIsnaIcDlci' object.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnIsnaIcIpOutPkts 1.3.6.1.4.1.637.3.1.8.5.4.1.1.3
The total number of packets transmitted by ISNA to the IP layer that are associated with a given Internal Connection
OBJECT-TYPE    
  Counter  

adnIsnaIcIpInPkts 1.3.6.1.4.1.637.3.1.8.5.4.1.1.4
The total number of packets received by ISNA from the IP layer that are associated with a given Internal Connection
OBJECT-TYPE    
  Counter  

adnIsnaIcIssOutPkts 1.3.6.1.4.1.637.3.1.8.5.4.1.1.5
The total number of ISS status packets transmitted by ISNA to ISOM that are associated with a given Internal Connection
OBJECT-TYPE    
  Counter  

adnIsnaIcIssInPkts 1.3.6.1.4.1.637.3.1.8.5.4.1.1.6
The total number of ISS status packets received by ISNA from ISOM that are associated with a given Internal Connection
OBJECT-TYPE    
  Counter  

adnIsnaIcIcmpIntPkts 1.3.6.1.4.1.637.3.1.8.5.4.1.1.7
The total number of ICMP packets received by ISNA from the local IP layer that are associated with a given Internal Connection
OBJECT-TYPE    
  Counter  

adnIsnaIcIcmpExtPkts 1.3.6.1.4.1.637.3.1.8.5.4.1.1.8
The total number of ICMP packets transmitted by ISNA to the local IP layer that are associated with a given Internal Connection
OBJECT-TYPE    
  Counter  

adnIsnaIcIpOutDiscards 1.3.6.1.4.1.637.3.1.8.5.4.1.1.9
The total number of IP packets destined to IP layer, discarded due to internal IP access failures or system resources errors. All packets discarded are associated with a given Internal Connection.
OBJECT-TYPE    
  Counter  

adnIsnaIcIpInDiscards 1.3.6.1.4.1.637.3.1.8.5.4.1.1.10
The total number of IP packets received from IP layer, discarded due to internal ICS access failures or system resources errors. All packets discarded are associated with a given Internal Connection.
OBJECT-TYPE    
  Counter  

adnIsnaIcIcbMsgtrace 1.3.6.1.4.1.637.3.1.8.5.4.1.1.11
This is the internal BINARY message trace table maintained by ISNA for this IC/PVC. The ISNA software is implemented as a Finite State Machine, and all events received and their corresponding states are stored here. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnIsnaIpTable 1.3.6.1.4.1.637.3.1.8.5.4.2
This is the ISNA IP diagnostic table definitions.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnIsnaIpEntry

adnIsnaIpEntry 1.3.6.1.4.1.637.3.1.8.5.4.2.1
ISNA IP Trafic counters level diagnostic table. Uses index 'adnIsnaIpIndex' defined in 'adnIsnaIpTable' table.
OBJECT-TYPE    
  AdnIsnaIpEntry  

adnIsnaIpIndex 1.3.6.1.4.1.637.3.1.8.5.4.2.1.1
This object is mapped to adnIsnaIpIndex in the adnIsnaIpTable.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnIsnaIpNumOfLpx 1.3.6.1.4.1.637.3.1.8.5.4.2.1.2
The total number of LPXs (logical processor index) in IIRT (IP ISNA routing table) table.
OBJECT-TYPE    
  Counter  

adnIsnaIpNumOfInterface 1.3.6.1.4.1.637.3.1.8.5.4.2.1.3
The total number of Interfaces in IIRT (IP ISNA routing table) table.
OBJECT-TYPE    
  Counter  

adnIsnaIpNumOfVc 1.3.6.1.4.1.637.3.1.8.5.4.2.1.4
The total number of VCs in IIRT (IP ISNA routing table) table.
OBJECT-TYPE    
  Counter  

adnIsnaIpIpOutPkts 1.3.6.1.4.1.637.3.1.8.5.4.2.1.5
The total number of packets transmitted by ISNA_IP to the IP layer.
OBJECT-TYPE    
  Counter  

adnIsnaIpIpInPkts 1.3.6.1.4.1.637.3.1.8.5.4.2.1.6
The total number of packets received by ISNA_IP from the IP layer.
OBJECT-TYPE    
  Counter  

adnIsnaIpIpDiscards 1.3.6.1.4.1.637.3.1.8.5.4.2.1.7
The total number of discarded IP packets coming from IP layer.
OBJECT-TYPE    
  Counter  

adnIsnaIpIpomOutPkts 1.3.6.1.4.1.637.3.1.8.5.4.2.1.9
The total number of packets transmitted by ISNA_IP to IPOM sybsystem.
OBJECT-TYPE    
  Counter  

adnIsnaIpIpomInPkts 1.3.6.1.4.1.637.3.1.8.5.4.2.1.10
The total number of packets received by ISNA_IP from IPOM subsytem.
OBJECT-TYPE    
  Counter  

adnIsnaIpIpomDiscards 1.3.6.1.4.1.637.3.1.8.5.4.2.1.11
The total number of discarded IP packets comming from IPOM subsystem.
OBJECT-TYPE    
  Counter  

adnIsnaIpRdssInPkts 1.3.6.1.4.1.637.3.1.8.5.4.2.1.13
The total number of packets received by ISNA_IP from RDSS subsytem.
OBJECT-TYPE    
  Counter  

adnIsnaIpRdssOutPkts 1.3.6.1.4.1.637.3.1.8.5.4.2.1.14
The total number of packets transmitted by ISNA_IP to RDSS sybsystem.
OBJECT-TYPE    
  Counter  

adnIsnaIpRdssDiscards 1.3.6.1.4.1.637.3.1.8.5.4.2.1.15
The total number of discarded IP packets comming from RDSS subsystem.
OBJECT-TYPE    
  Counter  

adnIsnaIpIirtTable 1.3.6.1.4.1.637.3.1.8.5.4.3
This is the ISNA IP IIRT (IP ISNA routing table) tree table definitions.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnIsnaIpIirtEntry

adnIsnaIpIirtEntry 1.3.6.1.4.1.637.3.1.8.5.4.3.1
ISNA IP IIRT (IP ISNA routing table) tree entry table. Uses index 'adnIsnaIpIirtIpaddrs' defined in 'adnIsnaIpIirtTable' table.
OBJECT-TYPE    
  AdnIsnaIpIirtEntry  

adnIsnaIpIirtIpaddrs 1.3.6.1.4.1.637.3.1.8.5.4.3.1.1
The next hop IP address .
OBJECT-TYPE    
  IpAddress  

adnIsnaIpIirtVcNum 1.3.6.1.4.1.637.3.1.8.5.4.3.1.2
The VC number on the local Interface, The NHIPA (next hop IP address) apply to the remote interface which the VC is connecting.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnIsnaIpIirtIfIndex 1.3.6.1.4.1.637.3.1.8.5.4.3.1.3
The ifindex Interface at the local machine.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnIsnaIpIirtLpxNum 1.3.6.1.4.1.637.3.1.8.5.4.3.1.5
The LPX (logical processor index) local which the interface is configured on.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnIsnaIpIirtSesid 1.3.6.1.4.1.637.3.1.8.5.4.3.1.6
The session id which IP packet is routed to.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnIsnaIpIirtVcState 1.3.6.1.4.1.637.3.1.8.5.4.3.1.7
The status of the VC (up or down) which associate with NHIPA (next hop IP address.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

adnNodeSupervisionEnvMIB 1.3.6.1.4.1.637.3.1.8.5.5
OBJECT IDENTIFIER    

adnBoardMiscTable 1.3.6.1.4.1.637.3.1.8.5.5.1
This is the board miscellaneous characteristics table.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnBoardMiscEntry

adnBoardMiscEntry 1.3.6.1.4.1.637.3.1.8.5.5.1.1
An entry in the Board Miscellaneous characteristics Table. There is one entry for each Board. The index corresponds to equipment type 'card' in the adnEquipTable.
OBJECT-TYPE    
  AdnBoardMiscEntry  

adnBoardMiscISL 1.3.6.1.4.1.637.3.1.8.5.5.1.1.1
This object contains the characteristics of the board retrieved through the ISL link. This object is a dump of 256 bytes of the EEPROM of the board, It contains information called 'group 2' information. The signification of each byte is detailed in the document 8BA00940001ASZZA. When the board is not plugged in, the value of this object is 00 00 00 00 ( that is, an octet string of length 4, with each octet having a zero decimal value).
OBJECT-TYPE    
  STRING  

adnMsupToolBoxEnvMIB 1.3.6.1.4.1.637.3.1.8.5.13
OBJECT IDENTIFIER    

adnMsupToolBoxSetup 1.3.6.1.4.1.637.3.1.8.5.13.1
This object provides a mechanism for controling the whole MSUP tool box setup. - default : the MSUP tool box configuration parameters are set to the default values. - temporary : the MSUP tool box configuration parameters have been personalized, but a CU restart will restore the default values. - permanent : the MSUP tool box configuration parameters have been personalized and saved in order to retrieve the personalization after CU cold or mild restarts. A set to permanent saves the setup for next restarts. A set to temporary keeps the current setup but deletes the previous save. A set to default restaures the default setup.
OBJECT-TYPE    
  INTEGER default(1), temporary(2), permanent(3)  

adnMsupCtxTable 1.3.6.1.4.1.637.3.1.8.5.13.2
A set of adnMsupCtxEntry entries.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnMsupCtxEntry

adnMsupCtxEntry 1.3.6.1.4.1.637.3.1.8.5.13.2.1
This object provides a mechanism to dump on the CU craft interface contexts in MSUP memory.
OBJECT-TYPE    
  AdnMsupCtxEntry  

adnMsupCtxType 1.3.6.1.4.1.637.3.1.8.5.13.2.1.1
The types of contexts in MSUP that can be dumped : - chassisCtx(1) : context of a chassis - boardCtx(2) : context of a board - processorCtx(3) : context of a processor - aeiPortCtx(4) : context of an AEI port - atmCtx(5) : ATM init context - generalCtx(6) : general MSUP data context - nodeConfigCtx(7) : node system configuration context - nodeSystCtx(8) : node system contextual context - sessionCtx(9) : IACS session context - cuCtx(10) : CU management context
OBJECT-TYPE    
  AdnMsupCtxType  

adnMsupCtxIndex 1.3.6.1.4.1.637.3.1.8.5.13.2.1.2
The index of a context.
OBJECT-TYPE    
  INTEGER  

adnMsupCtxAction 1.3.6.1.4.1.637.3.1.8.5.13.2.1.3
This object provides a mechanism to print on the CU craft interface information about a context. - dump : dumps the content of a context, - address : displays the address of a context, - format : displays the context in a C format.
OBJECT-TYPE    
  INTEGER other(0), dump(1), address(2), format(3)  

adnMsupPrintMIB 1.3.6.1.4.1.637.3.1.8.5.13.3
OBJECT IDENTIFIER    

adnMsupPrintInterface 1.3.6.1.4.1.637.3.1.8.5.13.3.1
This object is a bitmap that enables to activate the printing of MSUP exchanges on the CU craft interface. bit val meaning --- ------------------------------------------------------- 1 displays exchanges with SMSUP 2 displays exchanges with ATMSUP 4 displays exchanges with APSUP 8 displays exchanges with CUSUP 16 displays exchanges with NMGS in fixed format 32 displays exchanges with FLS 64 displays exchanges with Debug Manager 128 displays traps sent to SFAS 256 displays localization service messages
OBJECT-TYPE    
  INTEGER  

adnMsupPrintExecution 1.3.6.1.4.1.637.3.1.8.5.13.3.2
This object is a bitmap that enables to activate the printing of MSUP exchanges on the CU craft interface. bit val meaning --- ------------------------------------------------------- 1 displays execution traces about coupler redundancy 2 displays execution traces about configuration 4 displays execution traces about clock synchronization 8 displays board automaton traces 16 displays processor automaton traces 32 displays execution traces about CU management 64 displays execution traces about coupler debug 128 displays execution traces about timer management
OBJECT-TYPE    
  INTEGER  

adnMsupPrintCouplerStr 1.3.6.1.4.1.637.3.1.8.5.13.3.3
This object enable to active the display of STR received through SMSUP or APSUP from couplers on the CU craft interface
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

adnMsupHssTraceMIB 1.3.6.1.4.1.637.3.1.8.5.13.4
OBJECT IDENTIFIER    

adnMsupHssTraceLocalizationService 1.3.6.1.4.1.637.3.1.8.5.13.4.1
This object indicates wether the MSUP localization service writes into the MSUP HSS trace buffer.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

adnMsupHssTracePrint 1.3.6.1.4.1.637.3.1.8.5.13.4.2
This object indicates wether MSUP prints the HSS traces on the CU craft interface in real time.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

adnMsupHssTraceFreeze 1.3.6.1.4.1.637.3.1.8.5.13.4.3
This object indicates wether the MSUP HSS trace is frozen. On any CU restart this object is reset to the default value.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

adnMsupHssTraceFreezeOnAnyStr 1.3.6.1.4.1.637.3.1.8.5.13.4.4
This object indicates wether the MSUP HSS trace is to be frozen on next MSUP STR.
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

adnMsupHssTraceFreezeOnStrNumber 1.3.6.1.4.1.637.3.1.8.5.13.4.5
Number of the STR on which to freeze the MSUP HSS trace. 0 is an unused STR number.
OBJECT-TYPE    
  INTEGER  

adnMsupHssTraceDump 1.3.6.1.4.1.637.3.1.8.5.13.4.6
This object provides a mechanism to dump on the CU craft interface the formated content of the whole MSUP HSS trace buffer.
OBJECT-TYPE    
  INTEGER yes(1)  

adnMsupHssTraceSize 1.3.6.1.4.1.637.3.1.8.5.13.4.7
The size of the MSUP HSS trace buffer. A modification of this object can only be taken into account at the next start up.
OBJECT-TYPE    
  INTEGER  

adnAtmBoardErrCounterTable 1.3.6.1.4.1.637.3.1.8.5.5.2
This table is the ATM boards error counter table. Each counter corresponds to a defect number identified by a bit set in the adnAtmBoardASEStatus for ASe board, the adnAtmBoardCIGStatus for CIG board and the adnAtmBoardHSCStatus for HSC board. These nominators are defined in the adnAtmBoardErCounterTable. The counters are classified according to the board type. Some are specific to the broadband ATM switching element (BBASE) board also called the matrix board.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnAtmBoardErrCounterEntry

adnAtmBoardErrCounterEntry 1.3.6.1.4.1.637.3.1.8.5.5.2.1
An entry in the ATM boards error counter table.
OBJECT-TYPE    
  AdnAtmBoardErrCounterEntry  

adnAtmBoardErrUFOFCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.1
The counter associated with the number of user FIFO overflows; counter #0 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrUFRFCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.2
The counter associated with the number of user FIFO read failures; counter #1 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrNFOFCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.3
The counter associated with the number of network FIFO overflows; counter #2 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrPHTRAMPCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.4
The counter associated with the number of BGPHT chip RAM parity errors; counter #3 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrNFRFCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.5
The counter associated with the number of network FIFO read failures; counter #4 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrNAVCCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.6
The counter associated with the number of cells received on non active VC; counter #5 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrNAVPCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.7
The counter associated with the number of cells received on non active VP; counter #6 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrRBOFCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.8
The counter associated with the number of reception buffer overflows; counter #7 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrQRP0RAMPCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.9
The counter associated with the number of QRP 0 chip RAM parity errors; counter #14 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrQRP0DMACounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.10
The counter associated with the number of QRP 0 chip DMA errors; counter #15 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrQRP0FIFOCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.11
The counter associated with the number of QRP 0 chip extraction FIFO overflows; counter #16 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrQRP1RAMPCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.12
The counter associated with the number of QRP 1 chip RAM parity errors; counter #17 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrQRP1DMACounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.13
The counter associated with the number of QRP 1 chip DMA errors; counter #18 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrQRP1FIFOCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.14
The counter associated with the number of QRP 1 chip extraction FIFO overflows; counter #19 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrQRP2RAMPCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.15
The counter associated with the number of QRP 2 chip RAM parity errors; counter #20 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrQRP2DMACounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.16
The counter associated with the number of QRP 2 chip DMA errors; counter #21 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrQRP2FIFOCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.17
The counter associated with the number of QRP 2 chip extraction FIFO overflows; counter #22 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrQRP3RAMPCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.18
The counter associated with the number of QRP 3 chip RAM parity errors; counter #23 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrQRP3DMACounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.19
The counter associated with the number of QRP 3 chip DMA errors; counter #24 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrQRP3FIFOCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.20
The counter associated with the number of QRP 3 chip extraction FIFO overflows; counter #25 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrHMP0LLPCCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.21
The counter associated with the number of low priority cells lost due to SCD; counter #26 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrHMP0LHPCCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.22
The counter associated with the number of high priority cells lost due to buffer overflow(FULC); counter #27 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrHMP0SYNCCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.23
The counter associated with the number of fault synchronization in the HMP 0 chip; counter #28 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrHMP1LLPCCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.24
The counter associated with the number of low priority cells lost in the HMP 1 chip; counter #29 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrHMP1LHPCCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.25
The counter associated with the number of high priority cells lost in the HMP 1 chip; counter #30 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardErrHMP1SYNCCounter 1.3.6.1.4.1.637.3.1.8.5.5.2.1.26
The counter associated with the number of fault synchronization in the HMP 1 chip; counter #31 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardTrCounterTable 1.3.6.1.4.1.637.3.1.8.5.5.3
This table is the ATM boards traffic counter table. The counters are classified according to the board type. Some are specific to the broadband ATM switching element (BBASE) board also called the matrix board.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnAtmBoardTrCounterEntry

adnAtmBoardTrCounterEntry 1.3.6.1.4.1.637.3.1.8.5.5.3.1
An entry in the ATM boards traffic counter table.
OBJECT-TYPE    
  AdnAtmBoardTrCounterEntry  

adnAtmBoardTrHMP0MTCounter 1.3.6.1.4.1.637.3.1.8.5.5.3.1.1
The counter associated with the observation threshold 1 crossing of the HMP 0 chip; counter #0 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardTrHMP1MTCounter 1.3.6.1.4.1.637.3.1.8.5.5.3.1.2
The counter associated with the observation threshold 2 crossing of the HMP 1 chip; counter #1 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardTrFPTMICICounter 1.3.6.1.4.1.637.3.1.8.5.5.3.1.3
The counter associated with the number of free outgoing point-to-multipoint (PTM) internal channel identifiers (ICI); counter #2 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Gauge  

adnAeiPortErrCounterTable 1.3.6.1.4.1.637.3.1.8.5.5.4
This table is the ATM electrical interface (AEI) port error counter table. Each counter corresponds to a defect number identified by a bit set in the adnAtmPortASEStatus for ASe board, the adnAtmPortCIGStatus for CIG board and the adnAtmPortHSCStatus for HSC board. These nominators are defined in the adnAtmPortErCounterTable. The counters are classified according to the board type. Some are specific to the broadband ATM switching element (BBASE) board also called the matrix board.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnAeiPortErrCounterEntry

adnAeiPortErrCounterEntry 1.3.6.1.4.1.637.3.1.8.5.5.4.1
An entry in the ATM electrical interface (AEI) port error counter table.
OBJECT-TYPE    
  AdnAeiPortErrCounterEntry  

adnAeiPortErrOOSCounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.1
The counter associated with the out of synchronization intervals; counter #0 of the ATM core.
OBJECT-TYPE    
  Counter  

adnAeiPortErrLOSCounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.2
The counter associated with the loss of synchronization intervals; counter #1 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortErrNFOFCounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.3
The counter associated with the number of network FIFO overflows; counter #2 of the ATM core.
OBJECT-TYPE    
  Counter  

adnAeiPortErrIEMRAMPCounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.4
The counter associated with the number of BGIEM chip RAM parity errors; counter #3 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortErrCECHCounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.5
The counter associated with the number of correctable errors on cells header; counter #4 of the ATM core.
OBJECT-TYPE    
  Counter  

adnAeiPortErrUCECHCounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.6
The counter associated with the number of uncorrectable errors on cells header; counter #5 of the ATM core.
OBJECT-TYPE    
  Counter  

adnAeiPortErrCRCMA1Counter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.7
The counter associated with the number of CRC errors on payload field of maintenance active cells of type 1 (MA1); counter #6 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortErrCRCSICCounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.8
The counter associated with the number of CRC errors on payload field of self identified cells (SIC); counter #7 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortErrNPECounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.9
The counter associated with the number of parity errors on payload field of cells; counter #8 of the ATM core.
OBJECT-TYPE    
  Counter  

adnAeiPortErrRTAGCounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.10
The counter associated with the number of unallowed routing tags; counter #9 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortErrNMA1Counter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.11
The counter associated with the number of lost data maintenance cells; counter #12 of the ATM core.
OBJECT-TYPE    
  Counter  

adnAeiPortErrEMA1Counter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.12
The counter associated with the number of data maintenance cells received with error; counter #14 of the ATM core.
OBJECT-TYPE    
  Counter  

adnAeiPortErrNSFOFCounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.13
The counter associated with the number of network/signalling FIFO overflows; counter #17 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortErrNFWFCounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.14
The counter associated with the number of network FIFO write failures; counter #18 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortErrSFWFCounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.15
The counter associated with the number of signalling FIFO write failures; counter #19 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortErrNSFRFCounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.16
The counter associated with the number of network/signalling FIFO read failures; counter #20 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortErrUSFRFCounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.17
The counter associated with the number of user/signalling FIFO read failures; counter #22 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortErrUFWFCounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.18
The counter associated with the number of user FIFO write failures; counter #23 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortErrUSFOFCounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.19
The counter associated with the number of user/signalling FIFO overflows; counter #24 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortErrNICICounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.20
The counter associated with the number of cells received on non active internal channel identifier (ICI); counter #25 of the ATM core.
OBJECT-TYPE    
  Counter  

adnAeiPortErrNCRCCounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.21
The counter associated with the number of CRC errors on network side; counter #26 of the ATM core.
OBJECT-TYPE    
  Counter  

adnAeiPortErrNAALCounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.22
The counter associated with the number of ATM adaptation layer (AAL) sequence errors on network side; counter #27 of the ATM core.
OBJECT-TYPE    
  Counter  

adnAeiPortErrUCRCCounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.23
The counter associated with the number of CRC errors on user side; counter #28 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortErrUAALCounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.24
The counter associated with the number of ATM adaptation layer (AAL) sequence errors on user side; counter #29 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortErrURCCounter 1.3.6.1.4.1.637.3.1.8.5.5.4.1.25
The counter associated with the number of unrouted cells; counter #30 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortTrCounterTable 1.3.6.1.4.1.637.3.1.8.5.5.5
This table is the ATM electrical interface (AEI) port traffic counters table. The counters are classified according to the board type. Some are specific to the broadband ATM switching element (BBASE) board also called the matrix board.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnAeiPortTrCounterEntry

adnAeiPortTrCounterEntry 1.3.6.1.4.1.637.3.1.8.5.5.5.1
An entry in the ATM electrical interface (AEI) port traffic counters table.
OBJECT-TYPE    
  AdnAeiPortTrCounterEntry  

adnAeiPortTrPTPSetRqCounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.1
The counter associated with the number of point-to-point (PTP) setup requests; counter #1 of the ATM core.
OBJECT-TYPE    
  Counter  

adnAeiPortTrPTMSetRqCounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.2
The counter associated with the number of point-to-multipoint (PTM) setup requests; counter #2 of the ATM core.
OBJECT-TYPE    
  Counter  

adnAeiPortTrPTPSetRjBCounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.3
The counter associated with the number of point-to-point (PTP) setup rejects due to blocking; counter #3 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortTrPTMSetRjBCounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.4
The counter associated with the number of point-to-multipoint (PTM) setup rejects due to blocking; counter #4 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortTrPTPSetRjCCounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.5
The counter associated with the number of point-to-point (PTP) setup rejects due to communication; counter #5 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortTrPTMSetRjCCounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.6
The counter associated with the number of point-to-multipoint (PTM) setup rejects due to communication; counter #6 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortTrPTPSetTrCounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.7
The counter associated with the number of point-to-point (PTP) setup trials; counter #7 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortTrPTMSetTrCounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.8
The counter associated with the number of point-to-multipoint (PTM) setup trials; counter #8 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortTrPTPCnxCounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.9
The counter associated with the number of point-to-point (PTP) connections in progress; counter #13 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Gauge  

adnAeiPortTrPTMCnxCounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.10
The counter associated with the number of point-to-multipoint (PTM) connections in progress; counter #14 of the ATM core; this counter is not relevant for the matrix board.
OBJECT-TYPE    
  Gauge  

adnAeiPortTrPTPBWICIRqCounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.11
The counter associated with the number of point-to-point (PTP) bandwith or internal channel identifier (BW,ICI) requests; counter #4 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortTrPTMBWICIRqCounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.12
The counter associated with the number of point-to-multipoint (PTM) bandwith or internal channel identifier (BW,ICI) requests; counter #5 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortTrPTPBWRjCounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.13
The counter associated with the number of point-to-point (PTP) bandwith (BW) requests failure; counter #6 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortTrPTMBWRjCounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.14
The counter associated with the number of point-to-multipoint (PTM) bandwith (BW) requests failure; counter #7 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortTrPTPICIRjCounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.15
The counter associated with the number of point-to-point (PTP) internal channel identifier (ICI) requests failure; counter #8 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortTrPTMICIRjCounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.16
The counter associated with the number of point-to-multipoint (PTM) internal channel identifier (ICI) requests failure; counter #9 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortTrPeakBWCounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.17
The counter associated with the reserved peak bandwith (BW); counter #10 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Gauge  

adnAeiPortTrFPTPICICounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.18
The counter associated with the number of free point-to-point (PTP) internal channel identifiers (ICI); counter #12 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Gauge  

adnAeiPortTrMPriorBWCounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.19
The counter associated with the reserved mean priority bandwith (BW); Counter #14 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Gauge  

adnAeiPortTrInCellsCounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.20
The counter associated with the number of incoming cells; counter #15 of the ATM core.; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAeiPortTrOutCellsCounter 1.3.6.1.4.1.637.3.1.8.5.5.5.1.21
The counter associated with the number of outgoing cells; counter #16 of the ATM core; this counter is only relevant for the matrix board.
OBJECT-TYPE    
  Counter  

adnAtmBoardDefTable 1.3.6.1.4.1.637.3.1.8.5.5.20
This table is the ATM boards defects table. Some defects characteristics are updatable. Matrix board case: all the defects are only readable.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnAtmBoardDefEntry

adnAtmBoardDefEntry 1.3.6.1.4.1.637.3.1.8.5.5.20.1
An entry in the ATM boards defects table. There will be one entry for each defect (i.e error/warning) configured. Notice that according to the defect number, default value of each parameter of the instance may be different between two instances.
OBJECT-TYPE    
  AdnAtmBoardDefEntry  

adnAtmBoardDefBoardType 1.3.6.1.4.1.637.3.1.8.5.5.20.1.1
This is the ATM board type.
OBJECT-TYPE    
  INTEGER bbase(1), hbcig(2), bbe3b(3), bbt3b(4), bbs1b(5), bbt1b(6), bbe1b(7), hbcet(8), hbcee(9), hbceu(10), bbs4b(11), bbts1c(12), bbtp3c(13)  

adnAtmBoardDefNumber 1.3.6.1.4.1.637.3.1.8.5.5.20.1.2
This indicates the defect number. The description of each defect is given via the adnAtmBoardErASEStatus for ASE board, the adnAtmBoardErHSCStatus for HSC board, the adnAtmBoardErCIGStatus for CIG board. These nominators are defined in the adnAtmBoardErTable. There's a one to one mapping between the bit position and the defect number.
OBJECT-TYPE    
  INTEGER  

adnAtmBoardDefEventClass 1.3.6.1.4.1.637.3.1.8.5.5.20.1.3
This indicates the event class from hardware side: event: single fault signalled by the hardware or another software module to the supervision antenna inside the coupler board. No end is signalled, the presence of the fault can't be checked. status: the beginning of the fault is signalled to the supervision antenna inside the coupler board; the presence of the fault can be checked. statusc: the hardware provides no interrupt; this status is periodically scanned by the supervision antenna inside the coupler board. counter: a n bit long hardware counter counts the elementary events; an interrupt is generally sent at saturation; its value can be read; it is reset to zero when read.
OBJECT-TYPE    
  INTEGER event(1), status(2), statusc(3), counter(4)  

adnAtmBoardDefBegThreshold 1.3.6.1.4.1.637.3.1.8.5.5.20.1.4
This indicates the number of times an error is detected within a time period (defined by adnAtmBoardDefBegTimer) before an event (beginning of error) is generated and an error condition is entered.
OBJECT-TYPE    
  INTEGER  

adnAtmBoardDefEndThreshold 1.3.6.1.4.1.637.3.1.8.5.5.20.1.5
This indicates the maximum number of times a condition may be detected within a time period (defined by adnAtmBoardDefEndTimer) before an event (ending of error) is generated and an error condition is cleared.
OBJECT-TYPE    
  INTEGER  

adnAtmBoardDefBegTimer 1.3.6.1.4.1.637.3.1.8.5.5.20.1.6
This indicates the beginning timer in milliseconds during which the first appearance of an error is controlled.
OBJECT-TYPE    
  INTEGER  

adnAtmBoardDefEndTimer 1.3.6.1.4.1.637.3.1.8.5.5.20.1.7
This indicates the end timer in milliseconds during which the disappearance of an error is controlled.
OBJECT-TYPE    
  INTEGER  

adnAtmBoardDefSignalling 1.3.6.1.4.1.637.3.1.8.5.5.20.1.8
This indicates the defect signalling in addition to the report towards the control unit (CU). It is coded as a bit map. The various bit positions are: 1 : ERI (error indicator, bit inserted in the active maintenance cells to warn neighbour boards that an error is detected), 2 : P-FERF or RDI-P (path section far end received failure indication sent to the origin of the defect), 4 : MS-FERF or RDI-L (multiplexing section far end received failure indication sent to the origin of the defect), 8 : ATM-AIS (alarm indication signal is sent on a line defect towards the network handler dealing with VP/VC AIS management), 16 : RAI (remote alarm indication), 32 : RLED (the status led must be set permanent red).
OBJECT-TYPE    
  INTEGER  

adnAtmBoardDefErrOrWng 1.3.6.1.4.1.637.3.1.8.5.5.20.1.9
This indicates the defect type (i.e error or warning); an error is a critical defect which modifies the operational state of the object.
OBJECT-TYPE    
  INTEGER warning(1), error(2)  

adnAtmBoardDefReportEnable 1.3.6.1.4.1.637.3.1.8.5.5.20.1.10
This indicates the report control of the defect towards the control unit (CU).
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

adnAeiPortDefTable 1.3.6.1.4.1.637.3.1.8.5.5.21
This table is the ATM electrical interface (AEI) port defects table. Some defects characteristics are updatable. Matrix board case: all the defects are only readable.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnAeiPortDefEntry

adnAeiPortDefEntry 1.3.6.1.4.1.637.3.1.8.5.5.21.1
An entry in the ATM electrical interface (AEI) port defects table. There will be one entry for each defect (i.e error/warning) configured. Notice that according to the defect number, default value of each parameter of the instance may be different between two instances.
OBJECT-TYPE    
  AdnAeiPortDefEntry  

adnAeiPortDefBoardType 1.3.6.1.4.1.637.3.1.8.5.5.21.1.1
This is the ATM board type.
OBJECT-TYPE    
  INTEGER bbase(1), hbcig(2), bbe3b(3), bbt3b(4), bbs1b(5), bbt1b(6), bbe1b(7), hbcet(8), hbcee(9), hbceu(10), bbs4b(11), bbts1c(12), bbtp3c(13)  

adnAeiPortDefNumber 1.3.6.1.4.1.637.3.1.8.5.5.21.1.2
This indicates the defect number. The description of each defect is given via the adnAtmPortErASEStatus for ASE board, the adnAtmPortErHSCStatus for HSC board, the adnAtmPortErCIGStatus for CIG board. These nominators are defined in the adnAtmPortErTable. There's a one to one mappingbetween the bit position the defect number.
OBJECT-TYPE    
  INTEGER  

adnAeiPortDefEventClass 1.3.6.1.4.1.637.3.1.8.5.5.21.1.3
This indicates the event class from hardware side: event: single fault signalled by the hardware or another software module to the supervision antenna inside the coupler board. No end is signalled, the presence of the fault can't be checked. status: the beginning of the fault is signalled to the supervision antenna inside the coupler board; the presence of the fault can be checked. statusc: the hardware provides no interrupt; this status is periodically scanned by the supervision antenna inside the coupler board. counter: a n bit long hardware counter counts the elementary events; an interrupt is generally sent at saturation; its value can be read; it is reset to zero when read.
OBJECT-TYPE    
  INTEGER event(1), status(2), statusc(3), counter(4)  

adnAeiPortDefDirection 1.3.6.1.4.1.637.3.1.8.5.5.21.1.4
This indicates the direction of the defect when it occurs.
OBJECT-TYPE    
  INTEGER transmit(1), receive(2)  

adnAeiPortDefBegThreshold 1.3.6.1.4.1.637.3.1.8.5.5.21.1.5
This indicates the number of times an error is detected within a time period (defined by adnAeiPortDefBegTimer) before an event (beginning of error) is generated and an error condition is entered.
OBJECT-TYPE    
  INTEGER  

adnAeiPortDefEndThreshold 1.3.6.1.4.1.637.3.1.8.5.5.21.1.6
This indicates the maximum number of times a condition may be detected within a time period (defined by adnAeiPortDefEndTimer) before an event (ending of error) is generated and an error condition is cleared.
OBJECT-TYPE    
  INTEGER  

adnAeiPortDefBegTimer 1.3.6.1.4.1.637.3.1.8.5.5.21.1.7
This indicates the beginning timer in milliseconds during which the first appearance of an error is controlled.
OBJECT-TYPE    
  INTEGER  

adnAeiPortDefEndTimer 1.3.6.1.4.1.637.3.1.8.5.5.21.1.8
This indicates the end timer in milliseconds during which the disappearance of an error is controlled.
OBJECT-TYPE    
  INTEGER  

adnAeiPortDefSignalling 1.3.6.1.4.1.637.3.1.8.5.5.21.1.9
This indicates the defect signalling in addition to the report towards the control unit (CU). It is coded as a bit map. The various bit positions are: 1 : ERI (error indicator, bit inserted in the active maintenance cells to warn neighbour boards that an error is detected), 2 : P-FERF or RDI-P (path section far end received failure indication sent to the origin of the defect), 4 : MS-FERF or RDI-L (multiplexing section far end received failure indication sent to the origin of the defect), 8 : ATM-AIS (alarm indication signal is sent on a line defect towards the network handler dealing with VP/VC AIS management), 16 : RAI (remote alarm indication), 32 : RLED (the status led must be set permanent red).
OBJECT-TYPE    
  INTEGER  

adnAeiPortDefErrOrWng 1.3.6.1.4.1.637.3.1.8.5.5.21.1.10
This indicates the defect type (i.e error or warning); an error is a critical defect which modifies the operational state of the object.
OBJECT-TYPE    
  INTEGER warning(1), error(2)  

adnAeiPortDefReportEnable 1.3.6.1.4.1.637.3.1.8.5.5.21.1.11
This indicates the report control of the defect towards the control unit (CU).
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

adnAtmLineDefTable 1.3.6.1.4.1.637.3.1.8.5.5.22
This table is the ATM line defects table.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnAtmLineDefEntry

adnAtmLineDefEntry 1.3.6.1.4.1.637.3.1.8.5.5.22.1
An entry in the ATM line errors/warnings and defects table. There will be one entry for each defect (error/warning) configured. Notice that according to the defect number, default value of each parameter of the instance may be different between two instances.
OBJECT-TYPE    
  AdnAtmLineDefEntry  

adnAtmLineDefLineType 1.3.6.1.4.1.637.3.1.8.5.5.22.1.1
This is the line type.
OBJECT-TYPE    
  INTEGER atmDs3(1), atmE3(2), atmSonet(3), atmSdh(4), atmDs1(5), atmE1(6), cesDs1Unstruct(7), cesDs1Struct(8), cesE1Unstruct(9), cesE1Struct(10), cesV35(11), cesV36(12), cesX21(13)  

adnAtmLineDefNumber 1.3.6.1.4.1.637.3.1.8.5.5.22.1.2
This indicates the defect number.
OBJECT-TYPE    
  INTEGER  

adnAtmLineDefEventClass 1.3.6.1.4.1.637.3.1.8.5.5.22.1.3
This indicates the event class from hardware side: event: single fault signalled by the hardware or another software module to the supervision antenna inside the coupler board. No end is signalled, the presence of the fault can't be checked. status: the beginning of the fault is signalled to the supervision antenna inside the coupler board; the presence of the fault can be checked. statusc: the hardware provides no interrupt; this status is periodically scanned by the supervision antenna inside the coupler board. counter: a n bit long hardware counter counts the elementary events; an interrupt is generally sent at saturation; its value can be read; it is reset to zero when read.
OBJECT-TYPE    
  INTEGER event(1), status(2), statusc(3), counter(4)  

adnAtmLineDefUseInPerfCalcul 1.3.6.1.4.1.637.3.1.8.5.5.22.1.4
This indicates if the defect is used or not in performance calculation. If the defect is used for the performance calculation (i.e DefUseInPerfCalcul = yes), then the type of this defect (DefPerfType) from performance side can be either: defect: then, each occurence of the defect contributes to the performance calculation, counter: then, a counter is used to take into account this defect in performance calculation when the threshold defined by DefPerfThr is reached.
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

adnAtmLineDefPerfType 1.3.6.1.4.1.637.3.1.8.5.5.22.1.5
This indicates the performance type : counter: a counter is used to take into account this defect in performance calculation when the threshold defined by DefPerfThr is reached, defect: each occurence of the defect contributes to the performance calculation, defectc: each occurence of the defect contributes to the performance calculation, with counting of seconds (ANSI only).
OBJECT-TYPE    
  INTEGER counter(1), defect(2), defectc(3)  

adnAtmLineDefPerfThreshold 1.3.6.1.4.1.637.3.1.8.5.5.22.1.6
This indicates the threshold value of the performance counter.
OBJECT-TYPE    
  INTEGER  

adnAtmLineDefDirection 1.3.6.1.4.1.637.3.1.8.5.5.22.1.7
This indicates the direction of the defect when it occurs: transmit: defect on transmission direction, receive: defect on reception direction, without inhibition of transmission counters, receiveInhib: defect on reception direction, with inhibition of transmission counters.
OBJECT-TYPE    
  INTEGER transmit(1), receive(2), receiveInhib(3)  

adnAtmLineDefBegThreshold 1.3.6.1.4.1.637.3.1.8.5.5.22.1.8
This indicates the number of times an error is detected within a time period (defined by adnAtmLineDefBegTimer) before an event (beginning of error) is generated and an error condition is entered.
OBJECT-TYPE    
  INTEGER  

adnAtmLineDefEndThreshold 1.3.6.1.4.1.637.3.1.8.5.5.22.1.9
This indicates the maximum number of times a condition may be detected within a time period (defined by adnAtmLineDefEndTimer) before an event (ending of error) is generated and an error condition is cleared.
OBJECT-TYPE    
  INTEGER  

adnAtmLineDefBegTimer 1.3.6.1.4.1.637.3.1.8.5.5.22.1.10
This indicates the beginning timer in milliseconds during which the first appearance of an error is controlled.
OBJECT-TYPE    
  INTEGER  

adnAtmLineDefEndTimer 1.3.6.1.4.1.637.3.1.8.5.5.22.1.11
This indicates the end timer in milliseconds during which the disappearance of an error is controlled.
OBJECT-TYPE    
  INTEGER  

adnAtmLineDefSignalling 1.3.6.1.4.1.637.3.1.8.5.5.22.1.12
This indicates the failure signalling in addition to the report towards the control unit (CU). It is coded as a bit map. The various bit positions are: 1 : ERI (error indicator, bit inserted in the active maintenance cells to warn neighbour boards that an error is detected), 2 : P-FERF or RDI-P (path section far end received failure indication sent to the origin of the defect), 4 : MS-FERF or RDI-L (multiplexing section far end received failure indication sent to the origin of the defect), 8 : ATM-AIS (alarm indication signal is sent on a line defect towards the network handler dealing with VP/VC AIS management), 16 : RAI (remote alarm indication), 32 : RLED (the status led must be set permanent red).
OBJECT-TYPE    
  INTEGER  

adnAtmLineDefErrOrWng 1.3.6.1.4.1.637.3.1.8.5.5.22.1.13
This indicates the defect type (i.e error or warning); an error is a critical defect which modifies the operational state of the object.
OBJECT-TYPE    
  INTEGER warning(1), error(2)  

adnAtmLineDefReportEnable 1.3.6.1.4.1.637.3.1.8.5.5.22.1.14
This indicates the report control of the defect towards the control unit (CU).
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

adnAtmLineDefHierarchy 1.3.6.1.4.1.637.3.1.8.5.5.22.1.15
This indicates the current Defect hierarchy towards the other defects; it is coded as a long integer (i.e 32 bits). There's one bit per defect: - bit #n = 0 : defect n masked (i.e the current defect inhibits the #n one if both are present), - bit #n = 1 : defect n unmasked.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnAtmLineDefPerfLevel 1.3.6.1.4.1.637.3.1.8.5.5.22.1.16
This indicates the level at which the defect is managed: line: the defect is managed at line level, path: the defect is managed at path level.
OBJECT-TYPE    
  INTEGER line(1), path(2)  

adnAtmLineDefFailureSig 1.3.6.1.4.1.637.3.1.8.5.5.22.1.17
This indicates the failure signalling in addition to the report towards the control unit (CU). It is coded as a bit map. The various bit positions are: 1 : ERI or RSA (error indicator, bit inserted in theactive maintenance cells to warn neighbour boards that an error is detected), 2 : P-FERF or RDI-P or RAI (path section far end received failure indication sent to the origin of the defect), 4 : MS-FERF or RDI-L (multiplexing section far end received failure indication sent to the origin of the defect), 8 : ATM-AIS (alarm indication signal is sent on a line defect towards the network handler dealing with VP/VC AIS management), 32 : RLED (the status led must be set permanent red).
OBJECT-TYPE    
  INTEGER  

adnAtmLineDefDefectSig 1.3.6.1.4.1.637.3.1.8.5.5.22.1.18
This indicates the defect signalling in addition to the report towards the control unit (CU). It is coded as a bit map. The various bit positions are: 1 : ERI or RSA (error indicator, bit inserted in theactive maintenance cells to warn neighbour boards that an error is detected), 2 : P-FERF or RDI-P or RAI (path section far end received failure indication sent to the origin of the defect), 4 : MS-FERF or RDI-L (multiplexing section far end received failure indication sent to the origin of the defect), 8 : ATM-AIS (ATM alarm indication signal is sent on a line defect towards the network handler dealing with VP/VC AIS management), 32 : RLED (the status led must be set permanent red), 64 : NB-AIS (not ATM alarm indication signal is sent on a line defect towards the AEI side), 128 : TCK (trunk conditioning: in circuit emulation, a specified pattern is sent in timeslots, except TS0: a pattern for TS16, another one for other TS).
OBJECT-TYPE    
  INTEGER  

adnAtmLinePerfTable 1.3.6.1.4.1.637.3.1.8.5.5.23
This table is the ATM line performance parameters table.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnAtmLinePerfEntry

adnAtmLinePerfEntry 1.3.6.1.4.1.637.3.1.8.5.5.23.1
An entry in the ATM line performance parameters table. There will be one entry for each line type.
OBJECT-TYPE    
  AdnAtmLinePerfEntry  

adnAtmLinePerfLineType 1.3.6.1.4.1.637.3.1.8.5.5.23.1.1
This is the line type.
OBJECT-TYPE    
  INTEGER atmDs3(1), atmE3(2), atmSonet(3), atmSdh(4), atmDs1(5), atmE1(6), cesDs1(7), cesE1(8)  

adnAtmLinePerfBlocksPerSec 1.3.6.1.4.1.637.3.1.8.5.5.23.1.2
This indicates the number of blocks sent and received per second.
OBJECT-TYPE    
  INTEGER  

adnAtmLinePerfLowErrBlockThr 1.3.6.1.4.1.637.3.1.8.5.5.23.1.3
This indicates the low second error block threshold; the value range of this threshold is 1..adnAtmLinePerfHighErrBlockThr.
OBJECT-TYPE    
  INTEGER  

adnAtmLinePerfHighErrBlockThr 1.3.6.1.4.1.637.3.1.8.5.5.23.1.4
This indicates the high second error block threshold; the value range of this threshold is 1..adnAtmLinePerfBlocksPerSec.
OBJECT-TYPE    
  INTEGER  

adnAtmLinePerfBegUnAvailable 1.3.6.1.4.1.637.3.1.8.5.5.23.1.5
This indicates the number of consecutive severely erroned seconds necessary to declare the beginning of an unavailable period.
OBJECT-TYPE    
  INTEGER  

adnAtmLinePerfEndUnAvailable 1.3.6.1.4.1.637.3.1.8.5.5.23.1.6
This indicates the number of consecutive non severely erroned seconds necessary to declare the ending of the unavailable period.
OBJECT-TYPE    
  INTEGER  

adnAtmLinePerfConsSeverErrSec 1.3.6.1.4.1.637.3.1.8.5.5.23.1.7
This indicates the number of consecutive severely errored seconds used for the F3 maintenance flow calculation.
OBJECT-TYPE    
  INTEGER  

adnAtmLinePerfHighBBE15Thr 1.3.6.1.4.1.637.3.1.8.5.5.23.1.8
This indicates the high threshold for background block error on 1/4 hour period; the value range of this threshold is 0..900*adnAtmLinePerfHighErrBlockThr.
OBJECT-TYPE    
  INTEGER  

adnAtmLinePerfHighES15Thr 1.3.6.1.4.1.637.3.1.8.5.5.23.1.9
This indicates the high threshold for errored second on 1/4 hour period; the value range of this threshold is 0..900.
OBJECT-TYPE    
  INTEGER  

adnAtmLinePerfHighSES15Thr 1.3.6.1.4.1.637.3.1.8.5.5.23.1.10
This indicates the high threshold for severely errored second on 1/4 hour period; the value range of this threshold is 0..900.
OBJECT-TYPE    
  INTEGER  

adnAtmLinePerfLowBBE15Thr 1.3.6.1.4.1.637.3.1.8.5.5.23.1.11
This indicates the low threshold for background block error on 1/4 hour period; the value range of this threshold is 0..adnAtmLinePerfHighBBE15Thr.
OBJECT-TYPE    
  INTEGER  

adnAtmLinePerfLowES15Thr 1.3.6.1.4.1.637.3.1.8.5.5.23.1.12
This indicates the low threshold for errored second on 1/4 hour period; the value range of this threshold is 0..adnAtmLinePerfHighES15Thr.
OBJECT-TYPE    
  INTEGER  

adnAtmLinePerfLowSES15Thr 1.3.6.1.4.1.637.3.1.8.5.5.23.1.13
This indicates the low threshold for severely errored second on 1/4 hour period; the value range of this threshold is 0..adnAtmLinePerfHighSES15Thr.
OBJECT-TYPE    
  INTEGER  

adnAtmLinePerfBBE24Thr 1.3.6.1.4.1.637.3.1.8.5.5.23.1.14
This indicates the threshold for background block error on 24 hours period; the value range of this threshold is 0..86400*adnAtmLinePerfHighErrBlockThr.
OBJECT-TYPE    
  INTEGER  

adnAtmLinePerfES24Thr 1.3.6.1.4.1.637.3.1.8.5.5.23.1.15
This indicates the threshold for errored second on 24 hours period; the value range of this threshold is 0..86400.
OBJECT-TYPE    
  INTEGER  

adnAtmLinePerfSES24Thr 1.3.6.1.4.1.637.3.1.8.5.5.23.1.16
This indicates the threshold for severely errored second on 24 hours period; the value range of this threshold is 0..86400.
OBJECT-TYPE    
  INTEGER  

adnHscBoardTrMgtEnvTable 1.3.6.1.4.1.637.3.1.8.5.5.24
This table is the HSC Board Traffic Management parameters table. This is only relevant for HSC boards with output buffers
OBJECT-TYPE    
  SEQUENCE OF  
    AdnHscBoardTrMgtEnvEntry

adnHscBoardTrMgtEnvEntry 1.3.6.1.4.1.637.3.1.8.5.5.24.1
An entry in the ATM Traffic Management parameters table.
OBJECT-TYPE    
  AdnHscBoardTrMgtEnvEntry  

adnHscBoardTrMgtEnvOBLineAssig 1.3.6.1.4.1.637.3.1.8.5.5.24.1.1
This indicates the line number the output buffer is assigned to.
OBJECT-TYPE    
  INTEGER  

adnHscBoardTrMgtEnvMOBEFCIOffTh 1.3.6.1.4.1.637.3.1.8.5.5.24.1.2
This indicates the Explicit Forward Congestion Indication (EFCI) activation threshold in medium priority output buffer (OB); EFCI is generated towards the receiver termination point, in order to prevent congestion situation to be encountered within the output buffer; EFCI tagging is activated as soon as the activation threshold is reached; EFCI tagging is stopped as soon as the filling of the OB is below the EFCI desactivation threshold; the value range of the threshold is 0..adnHscBoardTrMgtMOBSize; this is not relevant for E1B and T1B boards.
OBJECT-TYPE    
  INTEGER  

adnHscBoardTrMgtEnvLOBEFCIOffTh 1.3.6.1.4.1.637.3.1.8.5.5.24.1.3
This indicates the Explicit Forward Congestion Indication (EFCI) desactivation threshold in low priority output buffer (OB); EFCI is generated towards the receiver termination point, in order to prevent congestion situation to be encountered within the output buffer; EFCI tagging is activated as soon as the activation threshold is reached; EFCI tagging is stopped as soon as the filling of the OB is below the EFCI desactivation threshold; the value range of the threshold is 0..adnHscBoardTrMgtLOBSize; this is not relevant for E1B and T1B boards.
OBJECT-TYPE    
  INTEGER  

adnAseBoardTrMgtEnvTable 1.3.6.1.4.1.637.3.1.8.5.5.25
This table is the BBASE Board Traffic Management environment table; the index is the AEI port number of the BBASE; this is relevant only for the matrix board with adnEquipSubType equal to adnBbaseb.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnAseBoardTrMgtEnvEntry

adnAseBoardTrMgtEnvEntry 1.3.6.1.4.1.637.3.1.8.5.5.25.1
An entry in the BBASE Board Traffic Management environment table.
OBJECT-TYPE    
  AdnAseBoardTrMgtEnvEntry  

adnAseBoardTrMgtEnvAeiPort 1.3.6.1.4.1.637.3.1.8.5.5.25.1.1
This is BBASE AEI port number.
OBJECT-TYPE    
  INTEGER  

adnAseBoardTrMgtEnvAeiSpeed 1.3.6.1.4.1.637.3.1.8.5.5.25.1.2
This indicates the speed of the AEI port ; the allowed values are : - speed622 : 622.08 Mb/s - speed603 : 603.23 Mb/s - speed593 : 593.80 Mb/s - speed565 : 565.53 Mb/s - speed155 : 155.52 Mb/s - speed150 : 150.81 Mb/s - speed148 : 148.45 Mb/s - speed142 : 142.00 Mb/s - speedLine : speed of the outgoing physical line ; this is relevant only for the matrix board with adnEquipSubType equal to adnBbaseb.
OBJECT-TYPE    
  INTEGER speed622(1), speed603(2), speed593(3), speed565(4), speed155(5), speed150(6), speed148(7), speed142(8), speedLine(9)  

adnCongMgmtPrivateMIB 1.3.6.1.4.1.637.3.1.8.5.6
OBJECT IDENTIFIER    

adnCongMgmtLTTable 1.3.6.1.4.1.637.3.1.8.5.6.1
The Frame Relay LT Information table for Congestion Management.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnCongMgmtLTEntry

adnCongMgmtLTEntry 1.3.6.1.4.1.637.3.1.8.5.6.1.1
An entry in the Frame Relay LT Information table . The line and channel portion of ifIndex is not significant.
OBJECT-TYPE    
  AdnCongMgmtLTEntry  

adnCongMgmtLTTraceFlag 1.3.6.1.4.1.637.3.1.8.5.6.1.1.1
flag indicating if trace per LT is enabled
OBJECT-TYPE    
  AdnEnableDisabled  

adnCongMgmtFreeBd2CongLevelTable 1.3.6.1.4.1.637.3.1.8.5.6.1.1.2
This is the BINARY table that determines the congestion level based upon the percentage of free Cryspix Buffer descriptors. It is placed here so that the level could be changed to achieve fine tuning. It is placed here for debugging and maintenance purpose only
OBJECT-TYPE    
  STRING  

adnCongMgmtProcUtilization 1.3.6.1.4.1.637.3.1.8.5.6.1.1.3
This is the processor utilization value of this LT as calculated by the congestion management. it is placed here for maintenance purpose only
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnCongMgmtChanEnvTable 1.3.6.1.4.1.637.3.1.8.5.6.2
The Frame Relay channel Information table for Congestion Management.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnCongMgmtChanEnvEntry

adnCongMgmtChanEnvEntry 1.3.6.1.4.1.637.3.1.8.5.6.2.1
An entry in the Frame Relay Channel Information table.
OBJECT-TYPE    
  AdnCongMgmtChanEnvEntry  

adnCongMgmtChannel 1.3.6.1.4.1.637.3.1.8.5.6.2.1.1
This is the BINARY internal structure per channel maintained by congestion management. It contains the contents of the channel control block. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnCongMgmtChanDiscMsgtrace 1.3.6.1.4.1.637.3.1.8.5.6.2.1.2
This is the BINARY discard message trace table per channel maintained by congestion management. It contents the discard message received by this channel from other cards. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnCongMgmtChanAppliMsgTrace 1.3.6.1.4.1.637.3.1.8.5.6.2.1.3
This is the BINARY message trace table per channel maintained by congestion management. It contents the trace of all the messages received by this channel from the application. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnCongMgmtChanTraceFlag 1.3.6.1.4.1.637.3.1.8.5.6.2.1.4
flag indicating if trace per channel is enabled
OBJECT-TYPE    
  AdnEnableDisabled  

adnCongMgmtChanUtilization 1.3.6.1.4.1.637.3.1.8.5.6.2.1.5
Current channel utilization value in the egress direction
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnCongMgmtChanEgressMaxCUF 1.3.6.1.4.1.637.3.1.8.5.6.2.1.6
This is the maximum of the egress channel utilization and the processor utilization. This field may be set to zero via SNMP command, so that the user may be able to measure or read the maximum CUF over a period of time.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnCongMgmtChanMinTPSF 1.3.6.1.4.1.637.3.1.8.5.6.2.1.7
This is the minimum time in microseconds needed to process a subframe. This value is used when calculating processor utilization.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnCongMgmtVCEnvTable 1.3.6.1.4.1.637.3.1.8.5.6.3
This is the VC table for Frame Relay Congestion Management.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnCongMgmtVCEnvEntry

adnCongMgmtVCEnvEntry 1.3.6.1.4.1.637.3.1.8.5.6.3.1
VC table entry
OBJECT-TYPE    
  AdnCongMgmtVCEnvEntry  

adnCongMgmtVCcb 1.3.6.1.4.1.637.3.1.8.5.6.3.1.1
This is the BINARY internal PVC structure maintained by FRANP_SW. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnCongMgmtVCLineDataTrace 1.3.6.1.4.1.637.3.1.8.5.6.3.1.2
This is an internal BINARY message trace table maintained by congestion management for this VC. This trace will contain relevant info for each subframe comming from the Line and going to the bus. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnCongMgmtVCBusDataTrace 1.3.6.1.4.1.637.3.1.8.5.6.3.1.3
This is an internal BINARY message trace table maintained by congestion management for this VC. This trace will contain relevant info for each subframe comming from the Bus and going to the Line. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnCongMgmtVCTraceEnable 1.3.6.1.4.1.637.3.1.8.5.6.3.1.4
value indicating if trace per VC is enabled
OBJECT-TYPE    
  AdnEnableDisabled  

adnCongMgmtVCStateMachineTrace 1.3.6.1.4.1.637.3.1.8.5.6.3.1.5
This is an internal BINARY message trace table maintained by congestion management for this VC. This trace will contain the state and events of the SIR update state machine and ISM congestion state machine. It is placed here for maintenance purposes only.
OBJECT-TYPE    
  STRING  

adnCongMgmtLTTraceTable 1.3.6.1.4.1.637.3.1.8.5.6.4
The Frame Relay LT Trace table for Congestion Management.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnCongMgmtLTTraceEntry

adnCongMgmtLTTraceEntry 1.3.6.1.4.1.637.3.1.8.5.6.4.1
An entry in the Franp cm trace table
OBJECT-TYPE    
  AdnCongMgmtLTTraceEntry  

adnCongMgmtLTCQtrace 1.3.6.1.4.1.637.3.1.8.5.6.4.1.1
This is the trace area for the calendar queue related variables. It is placed here for maintenance purpose only
OBJECT-TYPE    
  STRING  

adnCongMgmtTraceIndex 1.3.6.1.4.1.637.3.1.8.5.6.4.1.2
Index indicating the current index of Calendar Queue trace. This is used to display more than 255 bytes of trace by means of repeated getnext message from the INMP
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnLapPrivateMIB 1.3.6.1.4.1.637.3.1.8.5.7
OBJECT IDENTIFIER    

adnLapPrivateTable 1.3.6.1.4.1.637.3.1.8.5.7.1
This is the LAP private table. It will exist once per LAP instance on each LT.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnLapPrivateEntry

adnLapPrivateEntry 1.3.6.1.4.1.637.3.1.8.5.7.1.1
One instance of the adnLapPrivateTable. There will be one instance for each LAP on each LT.
OBJECT-TYPE    
  AdnLapPrivateEntry  

adnLapPrivateTraceL1flag 1.3.6.1.4.1.637.3.1.8.5.7.1.1.1
This identifies the enable state of the tracing option at the Level 1 interface.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

adnLapPrivateTraceL1buffer 1.3.6.1.4.1.637.3.1.8.5.7.1.1.2
This is internal Level 1 message trace BINARY buffer
OBJECT-TYPE    
  STRING  

adnLapPrivateTraceL3flag 1.3.6.1.4.1.637.3.1.8.5.7.1.1.3
This identifies the enable state of the tracing option at the Level 3 interface.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

adnLapPrivateTraceL3buffer 1.3.6.1.4.1.637.3.1.8.5.7.1.1.4
This is internal Level 3 message trace BINARY buffer
OBJECT-TYPE    
  STRING  

adnLapPrivateTraceNMGSflag 1.3.6.1.4.1.637.3.1.8.5.7.1.1.5
This identifies the enable state of the tracing option at the NMGS interface.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

adnLapPrivateTraceNMGSbuffer 1.3.6.1.4.1.637.3.1.8.5.7.1.1.6
This is internal NMGSmessage trace BINARY buffer
OBJECT-TYPE    
  STRING  

adnLapFlowRASInfoflag 1.3.6.1.4.1.637.3.1.8.5.7.1.1.7
This identifies the enable state of the tracing option for RASinfo.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

adnLapFlowRASInfo 1.3.6.1.4.1.637.3.1.8.5.7.1.1.8
The statistics, trace information and current states debug dump fields to be used for remote debugging information. RAS = reliability, accessibility, serviceability
OBJECT-TYPE    
  STRING  

adnSsupEnvMIB 1.3.6.1.4.1.637.3.1.8.5.8
OBJECT IDENTIFIER    

adnSsupCUDbgPCBTable 1.3.6.1.4.1.637.3.1.8.5.8.1
SSUPCU maintained SM processor control blocks. There is one such block for every secondary module (SM) processor that has been created (configured). The SSUPCU will keep current status information about the remote processor (among many other things) in such a block.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnSsupCUDbgPCBEntry

adnSsupCUDbgPCBEntry 1.3.6.1.4.1.637.3.1.8.5.8.1.1
This is a description of a single entry in the SSUPCU Processor control block table. For debugging reason, a hex-dump is considered sufficient for now. Structures defined in C-header files will be used to determine the values of the appropriate fields. The table exists only on the CU, and therefore uses the CENTRALIZED indexing for SFAS/MSUP routing purposes. The additional index will be encoded to 'adnProcessor' type definition allow SSUPCU code to determine which instance is desired by the user.
OBJECT-TYPE    
  AdnSsupCUDbgPCBEntry  

adnSsupCUDbgPCBData 1.3.6.1.4.1.637.3.1.8.5.8.1.1.4
This is the hex-dump that represents the SSUPCU processor control block entry. Each such entry contains information about a SM processor on a coupler card that is configured.
OBJECT-TYPE    
  STRING  

adnSsupOMDbgPCBTable 1.3.6.1.4.1.637.3.1.8.5.8.2
SSUPOM maintained SM processor control blocks. There is one such block per OM processor. Only a single instance is maintained in each OM's memory, that pertaining to itself. This block contains information needed for the functioning of the processor, as well as information relating to the LT processors on the card.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnSsupOMDbgPCBEntry

adnSsupOMDbgPCBEntry 1.3.6.1.4.1.637.3.1.8.5.8.2.1
This is a description of a single entry in the SSUPOM Processor control block table. For debugging reason, a hex-dump is considered sufficient for now. Structures defined in C-header files will be used to determine the values of the appropriate fields. The 'adnCouplerIndex' is used for SFAS/MSUP routing purposes. This unfortunately only contains information of the chassis, slot and _line_ number (not processor). The user has to be aware of what line would map to the OM processor. Currently the line should be encoded as 512. Note that this information is likely to change.
OBJECT-TYPE    
  AdnSsupOMDbgPCBEntry  

adnCouplerIndex 1.3.6.1.4.1.637.3.1.8.5.8.2.1.1
The defintion of the 'adnCouplerIndex' object. It is used for routing the SNMP command to the appropriate processor by SFAS/MSUP sub-systems.
OBJECT-TYPE    
  AdnCouplerIndex  

adnSsupOMDbgPCBData 1.3.6.1.4.1.637.3.1.8.5.8.2.1.2
This is the hex-dump that represents the SSUPOM processor control block entry. Each such entry contains information about the OM processor in which memory the block resides.
OBJECT-TYPE    
  STRING  

adnSsupLTDbgPCBTable 1.3.6.1.4.1.637.3.1.8.5.8.3
SSUPLT maintained SM processor control blocks. There is one such block per LT processor. Only one block exists in each LT processor's memory, and it contains information needed by that processor only.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnSsupLTDbgPCBEntry

adnSsupLTDbgPCBEntry 1.3.6.1.4.1.637.3.1.8.5.8.3.1
This is a description of a single entry in the SSUPLT Processor control block table. For debugging reason, a hex-dump is considered sufficient for now. Structures defined in C-header files will be used to determine the values of the appropriate fields. The 'adnCouplerIndex' is used for SFAS/MSUP routing purposes. This unfortunately only contains information of the chassis, slot and _line_ number (not processor). The user has to be aware of what line would map to the LT processor. Currently the line should be encoded as 255 for the LLT, and 383 for the ULT processor. Note that this information is likely to change.
OBJECT-TYPE    
  AdnSsupLTDbgPCBEntry  

adnSsupLTDbgPCBData 1.3.6.1.4.1.637.3.1.8.5.8.3.1.1
This is the hex-dump that represents the SSUPLT processor control block entry. Each such entry contains information about the LT processor in which memory the block resides.
OBJECT-TYPE    
  STRING  

adnAAFDEnvMIB 1.3.6.1.4.1.637.3.1.8.5.10
OBJECT IDENTIFIER    

adnAAFDMaintTable 1.3.6.1.4.1.637.3.1.8.5.10.1
This table contains internal AAFD SWBB data structure, one entry per AAFD SWBB instance.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnAAFDMaintEntry

adnAAFDMaintEntry 1.3.6.1.4.1.637.3.1.8.5.10.1.1
An entry in the adnAAFDMaintTable. There will be one entry for each AAFD SWBB instance.
OBJECT-TYPE    
  AdnAAFDMaintEntry  

adnAAFDContxt1 1.3.6.1.4.1.637.3.1.8.5.10.1.1.1
This is the first part of internal AAFD data structure containing internal error counters and structures.
OBJECT-TYPE    
  STRING  

adnAAFDContxt2 1.3.6.1.4.1.637.3.1.8.5.10.1.1.2
This is the second part internal AAFD data structure containing internal error counters and structures.
OBJECT-TYPE    
  STRING  

adnAAFDContxt3 1.3.6.1.4.1.637.3.1.8.5.10.1.1.3
This is the third part internal AAFD data structure containing internal error counters and structures.
OBJECT-TYPE    
  STRING  

adnAAFDContxt4 1.3.6.1.4.1.637.3.1.8.5.10.1.1.4
This is the fourth part of internal AAFD data structure containing internal error counters and structures.
OBJECT-TYPE    
  STRING  

adnAAFDContxt5 1.3.6.1.4.1.637.3.1.8.5.10.1.1.5
This is the fifth part internal AAFD data structure containing internal error counters and structures.
OBJECT-TYPE    
  STRING  

adnAAFDContxt6 1.3.6.1.4.1.637.3.1.8.5.10.1.1.6
This is the sixth part internal AAFD data structure containing internal error counters and structures.
OBJECT-TYPE    
  STRING  

adnAAFDContxt7 1.3.6.1.4.1.637.3.1.8.5.10.1.1.7
This is the seventh part internal AAFD data structure containing internal error counters and structures.
OBJECT-TYPE    
  STRING  

adnAAFDVCCMaintTable 1.3.6.1.4.1.637.3.1.8.5.10.2
This table contains internal AAFD SWBB data structure, one entry per Frame Relay logical line.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnAAFDVCCMaintEntry

adnAAFDVCCMaintEntry 1.3.6.1.4.1.637.3.1.8.5.10.2.1
An entry in the adnAAFDVCCMaintTable. There will be one entry for each Frame Relay logical line.
OBJECT-TYPE    
  AdnAAFDVCCMaintEntry  

adnAAFDVCCContext1 1.3.6.1.4.1.637.3.1.8.5.10.2.1.1
This is the first part of internal data structure containing internal errors counters and structures concerning this Frame Relay logical line.
OBJECT-TYPE    
  STRING  

adnAAFDVCCContext2 1.3.6.1.4.1.637.3.1.8.5.10.2.1.2
This is the second part of internal data structure containing internal errors counters and structures concerning this Frame Relay logical line.
OBJECT-TYPE    
  STRING  

adnAAFDVCCContext3 1.3.6.1.4.1.637.3.1.8.5.10.2.1.3
This is the third part of internal data structure containing internal errors counters and structures concerning this Frame Relay logical line.
OBJECT-TYPE    
  STRING  

adnPssMIB 1.3.6.1.4.1.637.3.1.8.5.11
OBJECT IDENTIFIER    

adnPssBWTable 1.3.6.1.4.1.637.3.1.8.5.11.1
Entry AdnPssBWEntry
OBJECT-TYPE    
  SEQUENCE OF  
    AdnPssBandWEntry

adnPssBWEntry 1.3.6.1.4.1.637.3.1.8.5.11.1.1
Each entry (row) in the adnPSSBWTable. There will be one entry per ifindex
OBJECT-TYPE    
  AdnPssBandWEntry  

adnPssAvailBW 1.3.6.1.4.1.637.3.1.8.5.11.1.1.1
This is the internal binary available bandwidth information received by Path Select for a particular ifindex.
OBJECT-TYPE    
  STRING  

adnpssifindex 1.3.6.1.4.1.637.3.1.8.5.11.1.1.2
This is adn pss ifindex.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnPssTracehdrTable 1.3.6.1.4.1.637.3.1.8.5.11.2
This table contains various trace areas used by Path Select for maintenance/diagnostic purpose only.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnPssTraceValEntry

adnPssTracehdrEntry 1.3.6.1.4.1.637.3.1.8.5.11.2.1
Each entry (row) in the adnPssTraceTable.
OBJECT-TYPE    
  AdnPssTraceHdrEntry  

adnPssPrintFlag 1.3.6.1.4.1.637.3.1.8.5.11.2.1.1
This value is used to set Pss_print_flag to determine which printf's are allowed.
OBJECT-TYPE    
  INTEGER noprint(0), errorprint(1), debugprint(2), detailprint(3)  

adnPssFromFrtBuf 1.3.6.1.4.1.637.3.1.8.5.11.2.1.2
This is a binary value
OBJECT-TYPE    
  STRING  

adnPssToFrtBuf 1.3.6.1.4.1.637.3.1.8.5.11.2.1.3
The binary buffer value
OBJECT-TYPE    
  STRING  

adnPssTraceTable 1.3.6.1.4.1.637.3.1.8.5.11.3
This table contains various trace areas used by Path Select for maintenance/diagnostic purpose only.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnPssTraceValEntry

adnPssTraceEntry 1.3.6.1.4.1.637.3.1.8.5.11.3.1
Each entry (row) in the adnPssTraceTable.
OBJECT-TYPE    
  AdnPssTraceValEntry  

adnPssTraceIndex 1.3.6.1.4.1.637.3.1.8.5.11.3.1.1
Trace Index Number
OBJECT-TYPE    
  INTEGER  

adnPssTraceValue 1.3.6.1.4.1.637.3.1.8.5.11.3.1.2
This is the binary. All messages received from the Franp_si component are stored here
OBJECT-TYPE    
  STRING  

adnRtsagtMIB 1.3.6.1.4.1.637.3.1.8.5.12
OBJECT IDENTIFIER    

adnRtsagtPrintFlagTable 1.3.6.1.4.1.637.3.1.8.5.12.1
This table is to turn on and off the print capability Routes Agent for maintenance/diagnostic purpose only.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnRtsagtPrintFlagHdrEntry

adnRtsagtPrintFlagHdrEntry 1.3.6.1.4.1.637.3.1.8.5.12.1.1
Each entry (row) in the adnRtsagtPrintFlagTable.
OBJECT-TYPE    
  AdnRtsagtPrintFlagHdrEntry  

adnRtsagtPrintFlag 1.3.6.1.4.1.637.3.1.8.5.12.1.1.1
This value is used to set Rtsagt_print_flag to determine which printf's are allowed.
OBJECT-TYPE    
  INTEGER noprint(1), errorprint(2), debugprint(3), detailprint(4)  

adnRtsagtTraceTable 1.3.6.1.4.1.637.3.1.8.5.12.2
This table contains various trace areas used by Routes Agent for maintenance/diagnostic purpose only.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnRtsagtTraceEntry

adnRtsagtTraceEntry 1.3.6.1.4.1.637.3.1.8.5.12.2.1
Each entry (row) in the adnRtsagtTraceTable.
OBJECT-TYPE    
  AdnRtsagtTraceEntry  

adnRtsagtTraceIndex 1.3.6.1.4.1.637.3.1.8.5.12.2.1.1
Trace Index Number
OBJECT-TYPE    
  INTEGER  

adnRtsagtTraceValue 1.3.6.1.4.1.637.3.1.8.5.12.2.1.2
This is the binary.
OBJECT-TYPE    
  STRING  

adnRtsagtLinkCtrlBlkTable 1.3.6.1.4.1.637.3.1.8.5.12.3
This table contains Link Control Block values
OBJECT-TYPE    
  SEQUENCE OF  
    AdnRtsagtLinkCtrlEntry

adnRtsagtLinkCtrlBlkEntry 1.3.6.1.4.1.637.3.1.8.5.12.3.1
Entry in the adnRtsagtLinkCtrlBlkTable.
OBJECT-TYPE    
  AdnRtsagtLinkCtrlEntry  

adnRtsagtIfIndex 1.3.6.1.4.1.637.3.1.8.5.12.3.1.1
Routes agent link control block ifindex.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRtsagtLpx 1.3.6.1.4.1.637.3.1.8.5.12.3.1.2
Routes agent lpx self
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRtsagtUserNetFlag 1.3.6.1.4.1.637.3.1.8.5.12.3.1.3
Routes Agent 0:user, 1 : network.
OBJECT-TYPE    
  INTEGER user(1), network(2), other(3)  

adnRtsagtHssTpx 1.3.6.1.4.1.637.3.1.8.5.12.3.1.4
Routes agent hss : 1, tpx : 0, other : 2.
OBJECT-TYPE    
  INTEGER tpx(1), hss(2), other(3)  

adnRtsagtSigIfState 1.3.6.1.4.1.637.3.1.8.5.12.3.1.5
Routes agent Signal channel status received, sent, signal enabled, sig disabled, sig blocked, no. of sig states.
OBJECT-TYPE    
  INTEGER rcvdAddSig(1), sentChnlRdy(2), sigEnabChnl(3), sigDisblChnl(4), sigBlkdChl(5)  

adnRtsagtL2IfState 1.3.6.1.4.1.637.3.1.8.5.12.3.1.6
Routes agent states for L2 Interface Idle or link released, Waiting for establish, Link Established, Awaiting release conf, L2 flow controlled us, Number of L2 states.
OBJECT-TYPE    
  INTEGER l2idlest(1), l2waitestb(2), l2linkestb(3), l2awaitrelst(4), l2flowctrlst(5)  

adnRtsagtMhIfState 1.3.6.1.4.1.637.3.1.8.5.12.3.1.7
Routes agent MH States, Add request sent to MH, MH link status down, Sent link up request, Link with MH is up, MH has sent XOFF, Local XOFF sent to MH, Number of MH states.
OBJECT-TYPE    
  INTEGER mhreqsent(1), mhlinkstatdown(2), mhlinkupreq(3), mhlinkup(4), mhXoffsent(5), mhlclXoffsent(6)  

adnRtsagtL3IfState 1.3.6.1.4.1.637.3.1.8.5.12.3.1.8
Routes agent state of l3 interface, L3 not yet established, Sent Establish Req, We sent Xoff to Remote, Remote sent Xoff to us, We sent block to Remote, Remote sent block to us, Link up in data xfer, Number of L3 states.
OBJECT-TYPE    
  INTEGER l3notestb(1), l3sentestbreq(2), l3usrXoffsent(3), l3rmtXoffsent(4), l3usrblksent(5), l3rmtblksent(6), l3okxfer(7)  

adnRtsagtLhMainState 1.3.6.1.4.1.637.3.1.8.5.12.3.1.9
Routes agent state of Link Handler, Processing Add Request, Waiting for enable, Waiting for MDL confirm, Waiting TPX setup, Waiting TPX release, Waiting L2 establish, Waiting L3 establish, Wait for link up from MH, Wait for releases Link operational, L3 up, MH down on purpose, IACS is down, Number of LH states.
OBJECT-TYPE    
  INTEGER lhproceaddreq(1), lhwaitenable(2), lhmdlconf(3), lhtpxsetup(4), lhtpxrelease(5), lhl2estb(6), lhl3estbl(7), lhlinkupfrmmh(8), lhwaitreleases(9), lhlinkoparational(10), lhl3upmhdowm(11), lhiacsdown(12)  

adnRtsagtSiCcb 1.3.6.1.4.1.637.3.1.8.5.12.3.1.10
Routes agent Pointer to control Block of signal.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRtsagtLtLpx 1.3.6.1.4.1.637.3.1.8.5.12.3.1.11
Routes agent lpx of lt.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRtsagtMemLpx 1.3.6.1.4.1.637.3.1.8.5.12.3.1.12
Routes agent lpx for lt data transfer memory
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRtsagtAtmSiIfap 1.3.6.1.4.1.637.3.1.8.5.12.3.1.13
Routes agent Signalling IFAP
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRtsagtAtmSiSuid 1.3.6.1.4.1.637.3.1.8.5.12.3.1.14
Routes agent SUID
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRtsagtL3MaxPktSize 1.3.6.1.4.1.637.3.1.8.5.12.3.1.15
Routes agent negotiated pkt size with peer
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRtsagtPeerVersion 1.3.6.1.4.1.637.3.1.8.5.12.3.1.16
Routes agent link handler version of peer
OBJECT-TYPE    
  INTEGER  

adnRtsagtHeartBeatTime 1.3.6.1.4.1.637.3.1.8.5.12.3.1.17
Routes agent time period of sending heartbeat
OBJECT-TYPE    
  INTEGER  

adnRtsagtLinkDeadTime 1.3.6.1.4.1.637.3.1.8.5.12.3.1.18
Routes agent if no heartbeat for this time
OBJECT-TYPE    
  INTEGER  

adnRtsagtSigIfInfo 1.3.6.1.4.1.637.3.1.8.5.12.3.1.19
Routes agent information relevant to sig_if
OBJECT-TYPE    
  STRING  

adnRtsagtL2IfInfo 1.3.6.1.4.1.637.3.1.8.5.12.3.1.20
Routes agent information relevant to l2_if
OBJECT-TYPE    
  STRING  

adnRtsagtL3IfInfo 1.3.6.1.4.1.637.3.1.8.5.12.3.1.21
Routes agent information relevant to l3_if
OBJECT-TYPE    
  STRING  

adnRtsagtMhIfInfo 1.3.6.1.4.1.637.3.1.8.5.12.3.1.22
Routes agent information relevant to mh_if
OBJECT-TYPE    
  STRING  

adnRtsagtLhMainInfo 1.3.6.1.4.1.637.3.1.8.5.12.3.1.23
Routes agent information relevant to lh_main
OBJECT-TYPE    
  STRING  

adnRtsagtLhTimerInfo 1.3.6.1.4.1.637.3.1.8.5.12.3.1.24
Routes agent timer info
OBJECT-TYPE    
  STRING  

adnRtsagtNextLcb 1.3.6.1.4.1.637.3.1.8.5.12.3.1.25
Routes agent next LCB in the list
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRtsagtPrevLcb 1.3.6.1.4.1.637.3.1.8.5.12.3.1.26
Routes agent next LCB in the list
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRtsagtTimerDurations 1.3.6.1.4.1.637.3.1.8.5.12.3.1.27
Routes agent durations for various timers
OBJECT-TYPE    
  STRING  

adnRtsagtLayer2IdCcb 1.3.6.1.4.1.637.3.1.8.5.12.3.1.28
Routes agent set by layer2_id of Add channel
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRtsagtLayer2RefCcb 1.3.6.1.4.1.637.3.1.8.5.12.3.1.29
Routes agent set by l2_ctx.l2_ref of mdl_assign_conf
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRtsagtChannelType 1.3.6.1.4.1.637.3.1.8.5.12.3.1.30
Routes agent IfIndex type
OBJECT-TYPE    
  INTEGER atmtrunkvpc(1), atmtrunkvpandvc(2), atmtrunkvc(3), atminternodevp(4), framerelaytrunk(5)  

adnRtsagtLineMetric 1.3.6.1.4.1.637.3.1.8.5.12.3.1.31
Routes agent trace containing the delay and monetary cost metrics per line. The first and third octet strings are fields which contain a number representing the type of cost (delay(3) and monetary(4)). The second and fourth octet strings contain the actual cost value for the cost type defined in the field before it.
OBJECT-TYPE    
  STRING  

adnRtsagtLinkDeadFlag 1.3.6.1.4.1.637.3.1.8.5.12.3.1.32
Routes agent flag representing the status of the link dead timer on each line. A one indicates the timer is on and a zero indicates the timer is off. The link dead timer is a timer that starts when a line is set up and expires when there are no messages sent across the line for a period of time. If the timer expires the link is deemed dead and is reset. However, the timer is refreshed every time a message is sent across the link.
OBJECT-TYPE    
  INTEGER timeroff(0), timeron(1)  

adnRtsagtLocalAddrTable 1.3.6.1.4.1.637.3.1.8.5.12.4
Entry in the adnRtsagtLocalAddrTable
OBJECT-TYPE    
  SEQUENCE OF  
    AdnRtsagtLocalAddrEntry

adnRtsagtLocalAddrEntry 1.3.6.1.4.1.637.3.1.8.5.12.4.1
Entry in the adnRtsagtLocalAddrTable
OBJECT-TYPE    
  AdnRtsagtLocalAddrEntry  

adnRtsagtLocalAddrIndex 1.3.6.1.4.1.637.3.1.8.5.12.4.1.1
Routes agent Address Index.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRtsagtLocalAddrBlkHdr 1.3.6.1.4.1.637.3.1.8.5.12.4.1.2
Routes Agent address entry block
OBJECT-TYPE    
  STRING  

adnRtsagtLocalAddrBlkCard 1.3.6.1.4.1.637.3.1.8.5.12.4.1.3
Routes Agent address entry block
OBJECT-TYPE    
  STRING  

adnRtsagtTimerHdrTable 1.3.6.1.4.1.637.3.1.8.5.12.5
Entry in the adnRtsagtTimerHdrTable
OBJECT-TYPE    
  SEQUENCE OF  
    AdnRtsagtTimerHdrEntry

adnRtsagtTimerHdrEntry 1.3.6.1.4.1.637.3.1.8.5.12.5.1
Entry in the adnRtsagtTimerHdrTable
OBJECT-TYPE    
  AdnRtsagtTimerHdrEntry  

adnRtsagtTimerIndex 1.3.6.1.4.1.637.3.1.8.5.12.5.1.1
Routes agent Timer Index.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRtsagtTimerDuration 1.3.6.1.4.1.637.3.1.8.5.12.5.1.2
Routes Agent Timer duration
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRtsagtTimerPurpose 1.3.6.1.4.1.637.3.1.8.5.12.5.1.3
Routes Agent Timer Purpose
OBJECT-TYPE    
  INTEGER addchnlrsp(1), mhaddrsp(2), mhlinkrsp(3), mdlassigncnf(4), l2estcnf(5), l2rlscnf(6), l3estcnf(7), l3estretry(8), heartbeat(9), deadtimer(10), numr20timerpurpose(11)  

adnRtsagtTimerToBeDeleted 1.3.6.1.4.1.637.3.1.8.5.12.5.1.4
Routes Agent Timer tobedeleted
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRtsagtTimerNext 1.3.6.1.4.1.637.3.1.8.5.12.5.1.5
Routes Agent Next timer pointer
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRtsagtTimerPrevious 1.3.6.1.4.1.637.3.1.8.5.12.5.1.6
Routes Agent Next timer pointer
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRtsmgrMIB 1.3.6.1.4.1.637.3.1.8.5.15
OBJECT IDENTIFIER    

adnRtsmgrTraceTable 1.3.6.1.4.1.637.3.1.8.5.15.1
This table is used to get Message handling entries values for Route Manager.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnRtsmgrTraceEntry

adnRtsmgrTraceEntry 1.3.6.1.4.1.637.3.1.8.5.15.1.1
Each entry (row) in the adnRtsmgrTraceTable.
OBJECT-TYPE    
  AdnRtsmgrTraceEntry  

adnRtsmgrTraceIndex 1.3.6.1.4.1.637.3.1.8.5.15.1.1.1
Trace Index Number.
OBJECT-TYPE    
  INTEGER  

adnRtsmgrTraceValue 1.3.6.1.4.1.637.3.1.8.5.15.1.1.2
This string displays a string of 36 bytes combination of Route Manager trace entry constants, trace entry variables, and time stamp.
OBJECT-TYPE    
  STRING  

adnCvsiHssEnvMIB 1.3.6.1.4.1.637.3.1.8.5.14
OBJECT IDENTIFIER    

adnCvsiHssTable 1.3.6.1.4.1.637.3.1.8.5.14.1
This table is used by CVSI for the purpose of debugging.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnCvsiHssEntry

adnCvsiHssEntry 1.3.6.1.4.1.637.3.1.8.5.14.1.1
An entry in the CVSI HSS Table.
OBJECT-TYPE    
  AdnCvsiHssEntry  

adnCvsiHssIndex 1.3.6.1.4.1.637.3.1.8.5.14.1.1.1
This entry represents the current instance or index of the table. It is provided in order to be able to dump each instance of each object.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnCvsiHssTraceCntl 1.3.6.1.4.1.637.3.1.8.5.14.1.1.2
This object provides a mechanism for controlling Cvsi's ability to enable/disable tracing of various types of messages. The following are the possible values it can hold. 0 - Trace disabled 1 - Trace CVSI Library information messages 2 - Trace CVSI Library Minor error messages 4 - Trace CVSI Library Major error messages 8 - Trace CVSI Library detailed messages 16 - Trace CVSI relay messages 32 - Trace CVSI Master messages 64 - Trace ATM Signalling messages 128 - Trace CLCS messages
OBJECT-TYPE    
  INTEGER  

adnCvsiHssTraceArea 1.3.6.1.4.1.637.3.1.8.5.14.1.1.3
This is the internal BINARY message trace entry maintained by CVSI.
OBJECT-TYPE    
  STRING  

adnCvsiHssCounters 1.3.6.1.4.1.637.3.1.8.5.14.1.1.4
This is the internal BINARY pointer to set of Counters maintained by CVSI.
OBJECT-TYPE    
  STRING  

adnCvsiHssGlobalVars 1.3.6.1.4.1.637.3.1.8.5.14.1.1.5
CVSI global variables.
OBJECT-TYPE    
  STRING  

adnCvsiHssPrintCntl 1.3.6.1.4.1.637.3.1.8.5.14.1.1.6
This object provides a mechanism for controlling Cvsi's ability to print on the CU console various debugging information. The following are the possible values for this object. 0 - Print disabled 1 - Print CVSI Library information messages 2 - Print CVSI Library Minor error messages 4 - Print CVSI Library Major error messages 8 - Print CVSI Library detailed messages 16 - Print CVSI relay messages 32 - Print CVSI Master messages 64 - Print ATM Signalling messages 128 - Print CLCS messages
OBJECT-TYPE    
  INTEGER  

adnCvsiHssVcActive 1.3.6.1.4.1.637.3.1.8.5.14.1.1.7
Indicates the number of active TDP Virtual Circuits in the current node.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssMIB 1.3.6.1.4.1.637.3.1.8.5.100
OBJECT IDENTIFIER    

adnRdssRegistrationTable 1.3.6.1.4.1.637.3.1.8.5.100.1
This table contains an array of records to those subsystems that have established IACS session with Routes Distribution.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnRdssRegistrationEntry

adnRdssRegistrationEntry 1.3.6.1.4.1.637.3.1.8.5.100.1.1
Entry in the adnRdssRegistrationTable.
OBJECT-TYPE    
  AdnRdssRegistrationEntry  

adnRdssRegLpxIndex 1.3.6.1.4.1.637.3.1.8.5.100.1.1.1
The LPX of subsystem which is registered to Routes Distribution.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssIcsRef 1.3.6.1.4.1.637.3.1.8.5.100.1.1.2
ICS Reference number
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssSessionId 1.3.6.1.4.1.637.3.1.8.5.100.1.1.3
This field identifies which SWBB (IPforwarding, ISNA, GDC, SFAS or PRTA) this registration entry is belong to.
OBJECT-TYPE    
  INTEGER ipforwarding(1), isna(3), gdc(4), prta(5), sfas(8)  

adnRdssCongestionFlag 1.3.6.1.4.1.637.3.1.8.5.100.1.1.4
This flag indicates whether the IACS session between Routes Distribution and the registered subsystem (IPforwarding, ISNA, GDC, SFAS or PRTA) in registration entry is congested or not.
OBJECT-TYPE    
  INTEGER notcongested(1), congested(2)  

adnRdssFatSequenceNum 1.3.6.1.4.1.637.3.1.8.5.100.1.1.5
This field identifies the sequence number used to send the last previous FAT message. The sequence number increments sequentially on every new FAT message sent. It will be rolled back to zero when reached maximum value.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssGatSequenceNum 1.3.6.1.4.1.637.3.1.8.5.100.1.1.6
This field identifies the sequence number used to send the last previous GAT message. The sequence number increments sequentially on every new GAT message sent. It will be rolled back to zero when reached maximum value.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssMatSequenceNum 1.3.6.1.4.1.637.3.1.8.5.100.1.1.7
This field identifies the sequence number used to send the last previous MAT message. The sequence number increments sequentially on every new MAT message sent. It will be rolled back to zero when reached maximum value.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssAckFlags 1.3.6.1.4.1.637.3.1.8.5.100.1.1.8
This is bit-map field represents the statuses of acknowledgment from a previous transmitted FAT, GAT, or MAT message. Bit 0 represents FAT acknowledgment, bit 1 represents GAT acknowledgment, and bit 2 represents MAT acknowledgment. If a bit position has value of zero, it indicates the correspond acknowledgment message has not been received. When an acknowledgment message is received, its sequence number is compared with the correspond transmitted message's sequence number. If both are match, then the correspond Ack Flag bit will be set. If both are not match, then the received message will be ignored.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssNextHopLastSequenceNum 1.3.6.1.4.1.637.3.1.8.5.100.1.1.9
This field hold the sequesnce number of the last received valid Next-Hop message. It is used for handling duplicate received messages. This field is intialized to 0xff.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssLatLastSequenceNum 1.3.6.1.4.1.637.3.1.8.5.100.1.1.10
This field hold the sequesnce number of the last received valid LAT message. It is used for handling duplicate received messages. This field is intialized to 0xff.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssMatLastSequenceNum 1.3.6.1.4.1.637.3.1.8.5.100.1.1.11
This field hold the sequesnce number of the last received valid MAT message. It is used for handling duplicate received messages. This field is intialized to 0xff.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssTransmitMsgBufId 1.3.6.1.4.1.637.3.1.8.5.100.1.1.12
This is the address of the message buffer for sending data.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssGatTableTraverseStatus 1.3.6.1.4.1.637.3.1.8.5.100.1.1.13
This field is used to indentify whether the traversing is currently on LPX, Ifindex or VC.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssGatTableTraverseLpxKey 1.3.6.1.4.1.637.3.1.8.5.100.1.1.14
This field is used to identify the LPX of corresponding interface being traverse.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssTypeOfTableRequested 1.3.6.1.4.1.637.3.1.8.5.100.1.1.15
This field is bit-map defining what types of tables are to be provided to the registering subsystem. Table types include FAT, GAT, MAT, and etc.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssGatTableTraverseStartKey 1.3.6.1.4.1.637.3.1.8.5.100.1.1.16
This key is used for the purpose of distributing the entries from the GAT table when a SWBB subsystem has just register (just came up) with Routes Distribution. The Start Key is the key to the first entry sent on the previous message to aid in the scenario when retransmission of the previous message is required. Set Start key to NULL to indicate completed table has been sent, or table is empty. Set Start Key to KEY {Root} to start traversal. Set Start Key equal to End Key to indicate GAT table traversal is completed.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssGatTableTraverseEndKey 1.3.6.1.4.1.637.3.1.8.5.100.1.1.17
This key is used for the purpose of distributing the entries from the GAT table when a SWBB subsystem has just register (just came up) with Routes Distribution. The End Key is the key to the last GAT entry sent on the previous message, and is used to keep track of where in the GAT table to continue for the next message.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssGatMsgQueueStartPointer 1.3.6.1.4.1.637.3.1.8.5.100.1.1.18
The GAT message queue contains linked list of updated entries. This start pointer marks an entry in the lists as beginning entry in the lists to be sent or is sending to the correspond IP Forwarding subsystem.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssFatEntranceKey 1.3.6.1.4.1.637.3.1.8.5.100.1.1.19
The FAT Entrance Key. This field is used to set the starting point to traverse the FAT table for this session.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssForwardingTable 1.3.6.1.4.1.637.3.1.8.5.100.2
The forwarding table contains data information to be forwarded, and status and control information relating to the entry itself for table book keeping purpose.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnRdssForwardingEntry

adnRdssForwardingEntry 1.3.6.1.4.1.637.3.1.8.5.100.2.1
Entry in the adnRdssForwardingTable.
OBJECT-TYPE    
  AdnRdssForwardingEntry  

adnRdssDestIpAddress 1.3.6.1.4.1.637.3.1.8.5.100.2.1.1
The IP address of the destination prefix.
OBJECT-TYPE    
  IpAddress  

adnRdssFatMask 1.3.6.1.4.1.637.3.1.8.5.100.2.1.2
This field represent the valid number of leading bits in the prefix of this address. It is the network IP mask.
OBJECT-TYPE    
  INTEGER  

adnRdssFatFlag 1.3.6.1.4.1.637.3.1.8.5.100.2.1.3
This field represents the type of the destination IP address.
OBJECT-TYPE    
  INTEGER unicastentry(1), broadcastentry(2), multicastentry(3), localhostentry(4), staticentry(5)  

adnRdssFatCommand 1.3.6.1.4.1.637.3.1.8.5.100.2.1.4
This is the same as the command field in the entry message header. Except when the value od this field is 255, then it is for internal used.
OBJECT-TYPE    
  AdnRdssCommandType  

adnRdssFatStatusAckCnt 1.3.6.1.4.1.637.3.1.8.5.100.2.1.5
This field conveys the status information of the entry itself. It has dual functions and divided into two separated fields: Entry Status field and ACK count field.
OBJECT-TYPE    
  INTEGER  

adnRdssNextHopIpAddr 1.3.6.1.4.1.637.3.1.8.5.100.2.1.6
This field represents the IP address of the directly connected router or the local IP address. If the adnRdssFatFlag is Local Host entry, then this field is Zero.
OBJECT-TYPE    
  IpAddress  

adnRdssFatLowerFsm 1.3.6.1.4.1.637.3.1.8.5.100.2.1.7
This longword is part of the three longwords which composes of forty eight 2-bit fields. Each 2-bits field represents the FSM of this entry to the corresponding IP Forwarding subsystem. The FAT Entry Processing FSM Control Block keeps track of which IP Forwarding this entry needed to be forwarding to, and which IP Forwarding this entry has been forwarded to, and which IP Forwarding has already acknowledged the reception of this entry.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssFatMidFsm 1.3.6.1.4.1.637.3.1.8.5.100.2.1.8
This longword is part of the three longwords which composes of forty eight 2-bit fields. Each 2-bits field represents the FSM of this entry to the corresponding IP Forwarding subsystem. The FAT Entry Processing FSM Control Block keeps track of which IP Forwarding this entry needed to be forwarding to, and which IP Forwarding this entry has been forwarded to, and which IP Forwarding has already acknowledged the reception of this entry.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssFatUpperFsm 1.3.6.1.4.1.637.3.1.8.5.100.2.1.9
This longword is part of the three longwords which composes of forty eight 2-bit fields. Each 2-bits field represents the FSM of this entry to the corresponding IP Forwarding subsystem. The FAT Entry Processing FSM Control Block keeps track of which IP Forwarding this entry needed to be forwarding to, and which IP Forwarding this entry has been forwarded to, and which IP Forwarding has already acknowledged the reception of this entry.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssGatIfindexTable 1.3.6.1.4.1.637.3.1.8.5.100.3
This table contains all information associated with all the ifindexes, which are configured in the IP Forwarding subsystems.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnRdssGatIfindexEntry

adnRdssGatIfindexEntry 1.3.6.1.4.1.637.3.1.8.5.100.3.1
Entry in the adnRdssGatIfindexTable.
OBJECT-TYPE    
  AdnRdssGatIfindexEntry  

adnRdssGatIfindexLpxIndex 1.3.6.1.4.1.637.3.1.8.5.100.3.1.1
The LPX of subsystem which is registered to Routes Distribution.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssGatIfIndex 1.3.6.1.4.1.637.3.1.8.5.100.3.1.2
This is the unique identifier associated to the logical IP interface.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssGatIfindexOption 1.3.6.1.4.1.637.3.1.8.5.100.3.1.3
Type of LAT message.
OBJECT-TYPE    
  AdnRdssOption  

adnRdssGatIfindexCommandType 1.3.6.1.4.1.637.3.1.8.5.100.3.1.4
Type of LAT command.
OBJECT-TYPE    
  AdnRdssCommandType  

adnRdssGatIfindexStatus 1.3.6.1.4.1.637.3.1.8.5.100.3.1.5
Status of the ifindex.
OBJECT-TYPE    
  AdnRdssStatus  

adnRdssGatIfLiiAddress 1.3.6.1.4.1.637.3.1.8.5.100.3.1.6
This field is the source address associated with the ifindex.
OBJECT-TYPE    
  IpAddress  

adnRdssGatIfMask 1.3.6.1.4.1.637.3.1.8.5.100.3.1.7
This field represents the valid number of leading bits in the prefix of the adnRdssGatIfLiiAddress. It is the network IP mask.
OBJECT-TYPE    
  INTEGER  

adnRdssGatIfServiceType 1.3.6.1.4.1.637.3.1.8.5.100.3.1.8
This field defines the type of the data link layer below the . Refer to RFC 1512 for the exhaustive list of the service types. We currently support only Frame Relay and AAL5/ATM.
OBJECT-TYPE    
  INTEGER  

adnRdssGatIfMtu 1.3.6.1.4.1.637.3.1.8.5.100.3.1.9
This field represents the size of the MTU associated with this ifindex.
OBJECT-TYPE    
  INTEGER  

adnRdssGatIfPrivateData 1.3.6.1.4.1.637.3.1.8.5.100.3.1.11
This field is used by IPFW and is passed as it is from RDSS to all other IP Forwarding subsystems.
OBJECT-TYPE    
  INTEGER  

adnRdssGatIfBroadcastAddr 1.3.6.1.4.1.637.3.1.8.5.100.3.1.12
This field represents the broadcast IP address associated with the Ifindex.
OBJECT-TYPE    
  IpAddress  

adnRdssGatIfCost 1.3.6.1.4.1.637.3.1.8.5.100.3.1.13
This is the interface cost associated with the ifindex.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssGatVcTable 1.3.6.1.4.1.637.3.1.8.5.100.4
This table contains all information associated with all the VCs, which are configured in the IP Forwarding subsystems.
OBJECT-TYPE    
  SEQUENCE OF  
    AdnRdssGatVcEntry

adnRdssGatVcEntry 1.3.6.1.4.1.637.3.1.8.5.100.4.1
Entry in the adnRdssGatVcTable.
OBJECT-TYPE    
  AdnRdssGatVcEntry  

adnRdssGatVcNextHopAddr 1.3.6.1.4.1.637.3.1.8.5.100.4.1.1
This field represents the IP address of the directly connected router or the local IP address.
OBJECT-TYPE    
  IpAddress  

adnRdssGatVcLpx 1.3.6.1.4.1.637.3.1.8.5.100.4.1.2
The LPX of subsystem which is registered to Routes Distribution.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssGatVcIfIndex 1.3.6.1.4.1.637.3.1.8.5.100.4.1.3
This is the unique identifier associated to the VC.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssGatVcVpiVciOrDlci 1.3.6.1.4.1.637.3.1.8.5.100.4.1.4
This field represents the data link identifier (VPI/VCI for AAL5 or DLCI for Frame Relay for the Next-Hop under discussion.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssGatVcOption 1.3.6.1.4.1.637.3.1.8.5.100.4.1.5
Type of LAT message.
OBJECT-TYPE    
  AdnRdssOption  

adnRdssGatVcCommandType 1.3.6.1.4.1.637.3.1.8.5.100.4.1.6
Type of LAT Vc command.
OBJECT-TYPE    
  AdnRdssCommandType  

adnRdssGatVcStatus 1.3.6.1.4.1.637.3.1.8.5.100.4.1.7
Status of Vc.
OBJECT-TYPE    
  AdnRdssStatus  

adnRdssGatVcServiceType 1.3.6.1.4.1.637.3.1.8.5.100.4.1.8
This field defines the type of the data link layer below the . Refer to RFC 1512 for the exhaustive list of the service types. We currently support only Frame Relay and AAL5/ATM.
OBJECT-TYPE    
  INTEGER  

adnRdssGatVcCost 1.3.6.1.4.1.637.3.1.8.5.100.4.1.9
This is the interface cost associated with the ifindex.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssGatVcLiiAddress 1.3.6.1.4.1.637.3.1.8.5.100.4.1.10
This field is the source address associated with the ifindex.
OBJECT-TYPE    
  IpAddress  

adnRdssTraceTable 1.3.6.1.4.1.637.3.1.8.5.100.5
Each entry (row) in the adnRdssTraceTable
OBJECT-TYPE    
  SEQUENCE OF  
    AdnRdssTraceEntry

adnRdssTraceEntry 1.3.6.1.4.1.637.3.1.8.5.100.5.1
Each entry (row) in the adnRtsagtTraceTable.
OBJECT-TYPE    
  AdnRdssTraceEntry  

adnRdssTraceLpxIndex 1.3.6.1.4.1.637.3.1.8.5.100.5.1.1
LPX of registered subsystems.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnRdssTraceIndex 1.3.6.1.4.1.637.3.1.8.5.100.5.1.2
Trace Index Number
OBJECT-TYPE    
  INTEGER  

adnRdssTraceValue 1.3.6.1.4.1.637.3.1.8.5.100.5.1.3
This is the binary.
OBJECT-TYPE    
  STRING  

adnIprtEnvMIB 1.3.6.1.4.1.637.3.1.8.5.16
OBJECT IDENTIFIER    

adnIpRouteNetstatTable 1.3.6.1.4.1.637.3.1.8.5.16.1
This is the IP Routing Environmental Table
OBJECT-TYPE    
  SEQUENCE OF  
    AdnIpRouteNetstatEntry

adnIpRouteNetstatEntry 1.3.6.1.4.1.637.3.1.8.5.16.1.1
The IP Route Int Entry provides access to the CU TCP/UDP/IP stack information. It is recommended that the objects of this table be fetched with an SNMP get/getnext/etc. of all instances of the given object without any index postfix.
OBJECT-TYPE    
  AdnIpRouteNetstatEntry  

adnIpRouteNetstatIndex 1.3.6.1.4.1.637.3.1.8.5.16.1.1.1
This object defines the Index into this table.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnIpRouteNetstatIfconfig 1.3.6.1.4.1.637.3.1.8.5.16.1.1.2
This object defines the ASCII string that includes the CU IP Interface description (similar to unix [netstat -i] command).
OBJECT-TYPE    
  DisplayString  

adnIpRouteNetstatRoutes 1.3.6.1.4.1.637.3.1.8.5.16.1.1.3
This object defines the ASCII string that includes the CU IP Forwarding memory cache (similar to unix [netstat -r] command).
OBJECT-TYPE    
  DisplayString  

adnIpRouteNetstatProtStats 1.3.6.1.4.1.637.3.1.8.5.16.1.1.4
This object defines the ASCII string that includes the CU IP/ TCP/UPD packet count statistics (similar to unix [netstat -s] command).
OBJECT-TYPE    
  DisplayString  

adnIpRouteNetstatNetSockets 1.3.6.1.4.1.637.3.1.8.5.16.1.1.5
This object defines the ASCII string that includes the CU IP network sockets (similar to unix [netstat -a] command).
OBJECT-TYPE    
  DisplayString  

adnIpRouteNetstatNetConnec 1.3.6.1.4.1.637.3.1.8.5.16.1.1.6
This object defines the ASCII string that includes the CU IP network connections (similar to unix [netstat -A] command).
OBJECT-TYPE    
  DisplayString  

adnIpRouteNetstatNetNum 1.3.6.1.4.1.637.3.1.8.5.16.1.1.7
This object defines the ASCII string that includes the CU IP network numbers (similar to unix [netstat -n] command).
OBJECT-TYPE    
  DisplayString  

adnIpRouteDiagTable 1.3.6.1.4.1.637.3.1.8.5.16.2
This is the IP Routing Environmental Table
OBJECT-TYPE    
  SEQUENCE OF  
    AdnIpRouteDiagEntry

adnIpRouteDiagEntry 1.3.6.1.4.1.637.3.1.8.5.16.2.1
The IP Route Diag Entry defines IP Routing supplemental objects used to diagnose/trouble shoot IP Routing subsystem problems.
OBJECT-TYPE    
  AdnIpRouteDiagEntry  

adnIpRouteDiagIndex 1.3.6.1.4.1.637.3.1.8.5.16.2.1.1
This object defines the Index into this table.
OBJECT-TYPE    
  INTEGER -2147483648..2147483647  

adnIpRouteDiagPrintFlags 1.3.6.1.4.1.637.3.1.8.5.16.2.1.2
This object defines the print control flags bit mask used to enable printing debugging messages to the CU console screen. Each bit position is used to enable printing of processing different level of internal IP Routing processing messages: -- The hexidecimal bit positions are defined as follows: 0x0001 Do not print any diagnostic messages 0x0002 Print only NHP messages 0x0004 Print only GAT messages 0x0008 Print only SNMP messages 0x0010 Print only CONFIG messages 0x0020 Print NMGS FSM messages 0x0040 Print SFAS FSM messages 0x0080 Print RDSS FSM messages 0x0100 Print GATED FSM messages 0x0200 Print all ERROR messages 0x0400 Print all DEBUG messages 0x0800 Print ALL the above message types 0x1000 Activate GateD with its trace ON --
OBJECT-TYPE    
  INTEGER -2147483648..2147483647