ACD-SFP-MIB

File: ACD-SFP-MIB.mib (40935 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
ACCEDIAN-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Unsigned32 DisplayString TruthValue
MODULE-COMPLIANCE OBJECT-GROUP acdMibs

Defined Types

AcdSfpInfoEntry  
SEQUENCE    
  acdSfpInfoID Unsigned32
  acdSfpInfoConnIdx Unsigned32
  acdSfpInfoConnType INTEGER
  acdSfpInfoVendor DisplayString
  acdSfpInfoVendorOui DisplayString
  acdSfpInfoVendorPn DisplayString
  acdSfpInfoVendorRev DisplayString
  acdSfpInfoWavelength Unsigned32
  acdSfpInfoSerialNum DisplayString
  acdSfpInfoYear Unsigned32
  acdSfpInfoMonth Unsigned32
  acdSfpInfoDay Unsigned32
  acdSfpInfoLot Unsigned32
  acdSfpInfoRev8472 INTEGER
  acdSfpInfoPresent TruthValue
  acdSfpInfoDiag TruthValue
  acdSfpInfoInternal TruthValue
  acdSfpInfoAlm TruthValue
  acdSfpInfoIdType Unsigned32
  acdSfpInfoExtIdType Unsigned32
  acdSfpInfoTransCode DisplayString

AcdSfpDiagEntry  
SEQUENCE    
  acdSfpDiagID Unsigned32
  acdSfpDiagConnIdx Unsigned32
  acdSfpDiagTemp Integer32
  acdSfpDiagVcc Unsigned32
  acdSfpDiagLbc Unsigned32
  acdSfpDiagTxPwr Unsigned32
  acdSfpDiagRxPwr Unsigned32
  acdSfpDiagTxPwrdBm DisplayString
  acdSfpDiagRxPwrdBm DisplayString

AcdSfpThreshEntry  
SEQUENCE    
  acdSfpThreshID Unsigned32
  acdSfpThreshConnIdx Unsigned32
  acdSfpThreshTempHighAlm Integer32
  acdSfpThreshTempLowAlm Integer32
  acdSfpThreshTempHighWarn Integer32
  acdSfpThreshTempLowWarn Integer32
  acdSfpThreshVccHighAlm Unsigned32
  acdSfpThreshVccLowAlm Unsigned32
  acdSfpThreshVccHighWarn Unsigned32
  acdSfpThreshVccLowWarn Unsigned32
  acdSfpThreshLbcHighAlm Unsigned32
  acdSfpThreshLbcLowAlm Unsigned32
  acdSfpThreshLbcHighWarn Unsigned32
  acdSfpThreshLbcLowWarn Unsigned32
  acdSfpThreshTxPwrHighAlm Unsigned32
  acdSfpThreshTxPwrLowAlm Unsigned32
  acdSfpThreshTxPwrHighWarn Unsigned32
  acdSfpThreshTxPwrLowWarn Unsigned32
  acdSfpThreshRxPwrHighAlm Unsigned32
  acdSfpThreshRxPwrLowAlm Unsigned32
  acdSfpThreshRxPwrHighWarn Unsigned32
  acdSfpThreshRxPwrLowWarn Unsigned32
  acdSfpThreshTxPwrHighAlmdBm DisplayString
  acdSfpThreshTxPwrLowAlmdBm DisplayString
  acdSfpThreshTxPwrHighWarndBm DisplayString
  acdSfpThreshTxPwrLowWarndBm DisplayString
  acdSfpThreshRxPwrHighAlmdBm DisplayString
  acdSfpThreshRxPwrLowAlmdBm DisplayString
  acdSfpThreshRxPwrHighWarndBm DisplayString
  acdSfpThreshRxPwrLowWarndBm DisplayString

AcdSfpThreshStatusEntry  
SEQUENCE    
  acdSfpThreshStatusID Unsigned32
  acdSfpThreshStatusConnIdx Unsigned32
  acdSfpThreshStatusTempHighAlm TruthValue
  acdSfpThreshStatusTempLowAlm TruthValue
  acdSfpThreshStatusTempHighWarn TruthValue
  acdSfpThreshStatusTempLowWarn TruthValue
  acdSfpThreshStatusVccHighAlm TruthValue
  acdSfpThreshStatusVccLowAlm TruthValue
  acdSfpThreshStatusVccHighWarn TruthValue
  acdSfpThreshStatusVccLowWarn TruthValue
  acdSfpThreshStatusLbcHighAlm TruthValue
  acdSfpThreshStatusLbcLowAlm TruthValue
  acdSfpThreshStatusLbcHighWarn TruthValue
  acdSfpThreshStatusLbcLowWarn TruthValue
  acdSfpThreshStatusTxPwrHighAlm TruthValue
  acdSfpThreshStatusTxPwrLowAlm TruthValue
  acdSfpThreshStatusTxPwrHighWarn TruthValue
  acdSfpThreshStatusTxPwrLowWarn TruthValue
  acdSfpThreshStatusRxPwrHighAlm TruthValue
  acdSfpThreshStatusRxPwrLowAlm TruthValue
  acdSfpThreshStatusRxPwrHighWarn TruthValue
  acdSfpThreshStatusRxPwrLowWarn TruthValue

Defined Values

acdSfp 1.3.6.1.4.1.22420.2.4
The SFPs database for this Accedian Networks device.
MODULE-IDENTITY    

acdSfpNotifications 1.3.6.1.4.1.22420.2.4.5
OBJECT IDENTIFIER    

acdSfpMIBObjects 1.3.6.1.4.1.22420.2.4.6
OBJECT IDENTIFIER    

acdSfpConformance 1.3.6.1.4.1.22420.2.4.7
OBJECT IDENTIFIER    

acdSfpInfoTable 1.3.6.1.4.1.22420.2.4.1
Table of all SFP info
OBJECT-TYPE    
  SEQUENCE OF  
    AcdSfpInfoEntry

acdSfpInfoEntry 1.3.6.1.4.1.22420.2.4.1.1
This is a part of the content of the SFP's 0xA0 EEPROM
OBJECT-TYPE    
  AcdSfpInfoEntry  

acdSfpInfoID 1.3.6.1.4.1.22420.2.4.1.1.1
Unique value for each SFP. Its value ranges from 1 to MAXINT (4 bytes).
OBJECT-TYPE    
  Unsigned32  

acdSfpInfoConnIdx 1.3.6.1.4.1.22420.2.4.1.1.2
This object identifies the connector index on the box. The index is assigned form left to rigth starting with 1.
OBJECT-TYPE    
  Unsigned32  

acdSfpInfoConnType 1.3.6.1.4.1.22420.2.4.1.1.3
The connector value indicates the external optical or electrical cable connector provided as the media interface.
OBJECT-TYPE    
  INTEGER sfpSC(1), sfpFC1COPPER(2), sfpFC2COPPER(3), sfpBNC(4), sfpFCCOAX(5), sfpFIBERJACK(6), sfpLC(7), sfpMTRJ(8), sfpMU(9), sfpSG(10), sfpPIGTAIL(11), sfpHSSDCII(32), sfpCOPPERPIGTAIL(33)  

acdSfpInfoVendor 1.3.6.1.4.1.22420.2.4.1.1.4
The vendor name is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces (20h). The vendor name shall be the full name of the corporation, a commonly accepted abbreviation of the name of the corporation, the SCSI company code for the corporation, or the stock exchange code for the corporation. At least one of the vendor name or the vendor OUI fields shall contain valid serial data.
OBJECT-TYPE    
  DisplayString Size(0..16)  

acdSfpInfoVendorOui 1.3.6.1.4.1.22420.2.4.1.1.5
The vendor organizationally unique identifier field (vendor OUI) is a 3-byte field that contains the IEEE Company Identifier for the vendor. A value of all zero in the 3-byte field indicates that the Vendor OUI is unspecified.
OBJECT-TYPE    
  DisplayString Size(3)  

acdSfpInfoVendorPn 1.3.6.1.4.1.22420.2.4.1.1.6
The vendor part number (vendor PN) is a 16-byte field that contains ASCII characters, leftaligned and padded on the right with ASCII spaces (20h), defining the vendor's part number or product name. A value of all zero in the 16-byte field indicates that the vendor PN is unspecified.
OBJECT-TYPE    
  DisplayString Size(0..16)  

acdSfpInfoVendorRev 1.3.6.1.4.1.22420.2.4.1.1.7
The vendor revision number (vendor rev) is a 4-byte field that contains ASCII characters, leftaligned and padded on the right with ASCII spaces (20h), defining the vendor's product revision number. A value of all zero in the 4-byte field indicates that the vendor PN is unspecified.
OBJECT-TYPE    
  DisplayString Size(0..16)  

acdSfpInfoWavelength 1.3.6.1.4.1.22420.2.4.1.1.8
Nominal transmitter output wavelength at room temperature. 16 bit value with byte 60 as high order byte and byte 61 as low order byte. The laser wavelength is equal to the 16 bit integer value in nm. This field allows the user to read the laser wavelength directly, so it is not necessary to infer it from the transceiver Code for Electronic Compatibility.
OBJECT-TYPE    
  Unsigned32  

acdSfpInfoSerialNum 1.3.6.1.4.1.22420.2.4.1.1.9
The vendor serial number (vendor SN) is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces (20h), defining the vendor's serial number for the transceiver. A value of all zero in the 16-byte field indicates that the vendor PN is unspecified.
OBJECT-TYPE    
  DisplayString Size(0..16)  

acdSfpInfoYear 1.3.6.1.4.1.22420.2.4.1.1.10
This is the year of manufacturing.
OBJECT-TYPE    
  Unsigned32  

acdSfpInfoMonth 1.3.6.1.4.1.22420.2.4.1.1.11
This is the month of manufacturing.
OBJECT-TYPE    
  Unsigned32  

acdSfpInfoDay 1.3.6.1.4.1.22420.2.4.1.1.12
This is the day of manufacturing.
OBJECT-TYPE    
  Unsigned32  

acdSfpInfoLot 1.3.6.1.4.1.22420.2.4.1.1.13
This is the Lot number of manufacturing.
OBJECT-TYPE    
  Unsigned32  

acdSfpInfoRev8472 1.3.6.1.4.1.22420.2.4.1.1.14
This is to indicate to which revision this SFP is compatible.
OBJECT-TYPE    
  INTEGER undefined(0), rev93(1), rev94(2)  

acdSfpInfoPresent 1.3.6.1.4.1.22420.2.4.1.1.15
This is to indicate if the SFP is present or not.
OBJECT-TYPE    
  TruthValue  

acdSfpInfoDiag 1.3.6.1.4.1.22420.2.4.1.1.16
This is to indicate if the SFP supports Digital Diagnostics.
OBJECT-TYPE    
  TruthValue  

acdSfpInfoInternal 1.3.6.1.4.1.22420.2.4.1.1.17
This is to indicate if the SFP supports internal calibration. If externally calibrated, the measurements are raw A/D values and must be converted to real world units using calibration constants stored in EEPROM locations 56 to 95 at 2 wire serial bus address A2h. Calibration is valid over vendor specified operating temperature and voltage. Alarm and warning threshold values should be interpreted in the same manner as real time 16 bit data.
OBJECT-TYPE    
  TruthValue  

acdSfpInfoAlm 1.3.6.1.4.1.22420.2.4.1.1.18
This is to indicate if the SFP supports Alarm and warning thresholds for the Digital Diagnostics.
OBJECT-TYPE    
  TruthValue  

acdSfpInfoIdType 1.3.6.1.4.1.22420.2.4.1.1.19
The identifier value specifies the physical device described by the two-wire interface information. This value shall be included in the two-wire interface data (see SFF-8472 for details).
OBJECT-TYPE    
  Unsigned32  

acdSfpInfoExtIdType 1.3.6.1.4.1.22420.2.4.1.1.20
The extended identifier value provides additional information about the transceiver. The field should be set to 04h for all SFP modules indicating two-wire interface ID module definition (see SFF-8472 for details).
OBJECT-TYPE    
  Unsigned32  

acdSfpInfoTransCode 1.3.6.1.4.1.22420.2.4.1.1.21
The following bit significant indicators define the electronic or optical interfaces that are supported by the transceiver. At least one bit shall be set in this field (see SFF-8472 for details).
OBJECT-TYPE    
  DisplayString Size(8)  

acdSfpDiagTable 1.3.6.1.4.1.22420.2.4.2
Table of all SFP Digital Diagnostics
OBJECT-TYPE    
  SEQUENCE OF  
    AcdSfpDiagEntry

acdSfpDiagEntry 1.3.6.1.4.1.22420.2.4.2.1
This is a part the content of the SFP's 0xA0 EEPROM
OBJECT-TYPE    
  AcdSfpDiagEntry  

acdSfpDiagID 1.3.6.1.4.1.22420.2.4.2.1.1
Unique value for each SFP. Its value ranges from 1 to MAXINT (4 bytes).
OBJECT-TYPE    
  Unsigned32  

acdSfpDiagConnIdx 1.3.6.1.4.1.22420.2.4.2.1.2
This object identifies the connector index on the box. The index is assigned form left to rigth starting with 1.
OBJECT-TYPE    
  Unsigned32  

acdSfpDiagTemp 1.3.6.1.4.1.22420.2.4.2.1.3
Internally measured transceiver temperature. Represented as a 16 bit signed twos complement value in degrees Celsius, yielding a total range of -128C to +128C.
OBJECT-TYPE    
  Integer32  

acdSfpDiagVcc 1.3.6.1.4.1.22420.2.4.2.1.4
Internally measured transceiver supply voltage. Represented as a 16 bit unsigned integer with the voltage defined as the full 16 bit value (0 to 65535) with LSB equal to 100 micro-Volt, yielding a total range of 0 to +6.55 Volts.
OBJECT-TYPE    
  Unsigned32  

acdSfpDiagLbc 1.3.6.1.4.1.22420.2.4.2.1.5
Measured TX bias current in micro-Amps yielding a total range of 0 to 131 mA.
OBJECT-TYPE    
  Unsigned32  

acdSfpDiagTxPwr 1.3.6.1.4.1.22420.2.4.2.1.6
Measured TX output power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micro-Watt, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
OBJECT-TYPE    
  Unsigned32  

acdSfpDiagRxPwr 1.3.6.1.4.1.22420.2.4.2.1.7
Measured Rx input power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micro-Watt, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
OBJECT-TYPE    
  Unsigned32  

acdSfpDiagTxPwrdBm 1.3.6.1.4.1.22420.2.4.2.1.8
Measured TX output power in dBm (~ -40 to +8.2 dBm).
OBJECT-TYPE    
  DisplayString  

acdSfpDiagRxPwrdBm 1.3.6.1.4.1.22420.2.4.2.1.9
Measured Rx input power in dBm (~ -40 to +8.2 dBm).
OBJECT-TYPE    
  DisplayString  

acdSfpThreshTable 1.3.6.1.4.1.22420.2.4.3
Table of all SFP Alarm and Warning Thresholds
OBJECT-TYPE    
  SEQUENCE OF  
    AcdSfpThreshEntry

acdSfpThreshEntry 1.3.6.1.4.1.22420.2.4.3.1
This is a part the content of the SFP's 0xA0 EEPROM
OBJECT-TYPE    
  AcdSfpThreshEntry  

acdSfpThreshID 1.3.6.1.4.1.22420.2.4.3.1.1
Unique value for each SFP. Its value ranges from 1 to MAXINT (4 bytes).
OBJECT-TYPE    
  Unsigned32  

acdSfpThreshConnIdx 1.3.6.1.4.1.22420.2.4.3.1.2
This object identifies the connector index on the box. The index is assigned form left to rigth starting with 1.
OBJECT-TYPE    
  Unsigned32  

acdSfpThreshTempHighAlm 1.3.6.1.4.1.22420.2.4.3.1.3
High Alarm transceiver temperature. Represented as a 16 bit signed twos complement value in degrees Celsius, yielding a total range of -128C to +128C.
OBJECT-TYPE    
  Integer32  

acdSfpThreshTempLowAlm 1.3.6.1.4.1.22420.2.4.3.1.4
Low Alarm transceiver temperature. Represented as a 16 bit signed twos complement value in degrees Celsius, yielding a total range of -128C to +128C.
OBJECT-TYPE    
  Integer32  

acdSfpThreshTempHighWarn 1.3.6.1.4.1.22420.2.4.3.1.5
High Warning transceiver temperature. Represented as a 16 bit signed twos complement value in degrees Celsius, yielding a total range of -128C to +128C.
OBJECT-TYPE    
  Integer32  

acdSfpThreshTempLowWarn 1.3.6.1.4.1.22420.2.4.3.1.6
Low Warning transceiver temperature. Represented as a 16 bit signed twos complement value in degrees Celsius, yielding a total range of -128C to +128C.
OBJECT-TYPE    
  Integer32  

acdSfpThreshVccHighAlm 1.3.6.1.4.1.22420.2.4.3.1.7
High Alarm transceiver supply voltage. Represented as a 16 bit unsigned integer with the voltage defined as the full 16 bit value (0 to 65535) with LSB equal to 100 micro-Volt, yielding a total range of 0 to +6.55 Volts.
OBJECT-TYPE    
  Unsigned32  

acdSfpThreshVccLowAlm 1.3.6.1.4.1.22420.2.4.3.1.8
Low Alarm transceiver supply voltage. Represented as a 16 bit unsigned integer with the voltage defined as the full 16 bit value (0 to 65535) with LSB equal to 100 micro-Volt, yielding a total range of 0 to +6.55 Volts.
OBJECT-TYPE    
  Unsigned32  

acdSfpThreshVccHighWarn 1.3.6.1.4.1.22420.2.4.3.1.9
High Warning transceiver supply voltage. Represented as a 16 bit unsigned integer with the voltage defined as the full 16 bit value (0 to 65535) with LSB equal to 100 micro-Volt, yielding a total range of 0 to +6.55 Volts.
OBJECT-TYPE    
  Unsigned32  

acdSfpThreshVccLowWarn 1.3.6.1.4.1.22420.2.4.3.1.10
Low Warning transceiver supply voltage. Represented as a 16 bit unsigned integer with the voltage defined as the full 16 bit value (0 to 65535) with LSB equal to 100 micro-Volt, yielding a total range of 0 to +6.55 Volts.
OBJECT-TYPE    
  Unsigned32  

acdSfpThreshLbcHighAlm 1.3.6.1.4.1.22420.2.4.3.1.11
High Alarm TX bias current in micro-Amps yielding a total range of 0 to 131 mA.
OBJECT-TYPE    
  Unsigned32  

acdSfpThreshLbcLowAlm 1.3.6.1.4.1.22420.2.4.3.1.12
Low Alarm TX bias current in micro-Amps yielding a total range of 0 to 131 mA.
OBJECT-TYPE    
  Unsigned32  

acdSfpThreshLbcHighWarn 1.3.6.1.4.1.22420.2.4.3.1.13
High Warning TX bias current in micro-Amps yielding a total range of 0 to 131 mA.
OBJECT-TYPE    
  Unsigned32  

acdSfpThreshLbcLowWarn 1.3.6.1.4.1.22420.2.4.3.1.14
Low Warning TX bias current in micro-Amps yielding a total range of 0 to 131 mA.
OBJECT-TYPE    
  Unsigned32  

acdSfpThreshTxPwrHighAlm 1.3.6.1.4.1.22420.2.4.3.1.15
High Alarm TX output power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micro-Watt, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
OBJECT-TYPE    
  Unsigned32  

acdSfpThreshTxPwrLowAlm 1.3.6.1.4.1.22420.2.4.3.1.16
Low Alarm TX output power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micro-Watt, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
OBJECT-TYPE    
  Unsigned32  

acdSfpThreshTxPwrHighWarn 1.3.6.1.4.1.22420.2.4.3.1.17
High Warning TX output power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micro-Watt, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
OBJECT-TYPE    
  Unsigned32  

acdSfpThreshTxPwrLowWarn 1.3.6.1.4.1.22420.2.4.3.1.18
Low Warning TX output power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micro-Watt, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
OBJECT-TYPE    
  Unsigned32  

acdSfpThreshRxPwrHighAlm 1.3.6.1.4.1.22420.2.4.3.1.19
High Alarm RX input power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micro-Watt, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
OBJECT-TYPE    
  Unsigned32  

acdSfpThreshRxPwrLowAlm 1.3.6.1.4.1.22420.2.4.3.1.20
Low Alarm RX input power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micro-Watt, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
OBJECT-TYPE    
  Unsigned32  

acdSfpThreshRxPwrHighWarn 1.3.6.1.4.1.22420.2.4.3.1.21
High Warning RX input power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micro-Watt, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
OBJECT-TYPE    
  Unsigned32  

acdSfpThreshRxPwrLowWarn 1.3.6.1.4.1.22420.2.4.3.1.22
Low Warning RX input power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micro-Watt, yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
OBJECT-TYPE    
  Unsigned32  

acdSfpThreshTxPwrHighAlmdBm 1.3.6.1.4.1.22420.2.4.3.1.23
High Alarm TX output power in dBm (~ -40 to +8.2 dBm).
OBJECT-TYPE    
  DisplayString  

acdSfpThreshTxPwrLowAlmdBm 1.3.6.1.4.1.22420.2.4.3.1.24
Low Alarm TX output power in dBm (~ -40 to +8.2 dBm).
OBJECT-TYPE    
  DisplayString  

acdSfpThreshTxPwrHighWarndBm 1.3.6.1.4.1.22420.2.4.3.1.25
High Warning TX output power in dBm (~ -40 to +8.2 dBm).
OBJECT-TYPE    
  DisplayString  

acdSfpThreshTxPwrLowWarndBm 1.3.6.1.4.1.22420.2.4.3.1.26
Low Warning TX output power in dBm (~ -40 to +8.2 dBm).
OBJECT-TYPE    
  DisplayString  

acdSfpThreshRxPwrHighAlmdBm 1.3.6.1.4.1.22420.2.4.3.1.27
High Alarm Rx input power in dBm (~ -40 to +8.2 dBm).
OBJECT-TYPE    
  DisplayString  

acdSfpThreshRxPwrLowAlmdBm 1.3.6.1.4.1.22420.2.4.3.1.28
Low Alarm Rx input power in dBm (~ -40 to +8.2 dBm).
OBJECT-TYPE    
  DisplayString  

acdSfpThreshRxPwrHighWarndBm 1.3.6.1.4.1.22420.2.4.3.1.29
High Warning Rx input power in dBm (~ -40 to +8.2 dBm).
OBJECT-TYPE    
  DisplayString  

acdSfpThreshRxPwrLowWarndBm 1.3.6.1.4.1.22420.2.4.3.1.30
Low Warning Rx input power in dBm (~ -40 to +8.2 dBm).
OBJECT-TYPE    
  DisplayString  

acdSfpThreshStatusTable 1.3.6.1.4.1.22420.2.4.4
Table of all SFP Digital Diagnostics Thresholds statuses
OBJECT-TYPE    
  SEQUENCE OF  
    AcdSfpThreshStatusEntry

acdSfpThreshStatusEntry 1.3.6.1.4.1.22420.2.4.4.1
This is a part the content of the SFP's 0xA2 EEPROM
OBJECT-TYPE    
  AcdSfpThreshStatusEntry  

acdSfpThreshStatusID 1.3.6.1.4.1.22420.2.4.4.1.1
Unique value for each SFP. Its value ranges from 1 to MAXINT (4 bytes).
OBJECT-TYPE    
  Unsigned32  

acdSfpThreshStatusConnIdx 1.3.6.1.4.1.22420.2.4.4.1.2
This object identifies the connector index on the box. The index is assigned form left to rigth starting with 1.
OBJECT-TYPE    
  Unsigned32  

acdSfpThreshStatusTempHighAlm 1.3.6.1.4.1.22420.2.4.4.1.3
This is to indicate if the temperature reaches or overpasses the High alarm threshold.
OBJECT-TYPE    
  TruthValue  

acdSfpThreshStatusTempLowAlm 1.3.6.1.4.1.22420.2.4.4.1.4
This is to indicate if the temperature reaches or underpasses the Low alarm threshold.
OBJECT-TYPE    
  TruthValue  

acdSfpThreshStatusTempHighWarn 1.3.6.1.4.1.22420.2.4.4.1.5
This is to indicate if the temperature reaches or overpasses the High warning threshold.
OBJECT-TYPE    
  TruthValue  

acdSfpThreshStatusTempLowWarn 1.3.6.1.4.1.22420.2.4.4.1.6
This is to indicate if the temperature reaches or underpasses the Low warning threshold.
OBJECT-TYPE    
  TruthValue  

acdSfpThreshStatusVccHighAlm 1.3.6.1.4.1.22420.2.4.4.1.7
This is to indicate if the supply voltage reaches or overpasses the High alarm threshold.
OBJECT-TYPE    
  TruthValue  

acdSfpThreshStatusVccLowAlm 1.3.6.1.4.1.22420.2.4.4.1.8
This is to indicate if the supply voltage reaches or underpasses the Low alarm threshold.
OBJECT-TYPE    
  TruthValue  

acdSfpThreshStatusVccHighWarn 1.3.6.1.4.1.22420.2.4.4.1.9
This is to indicate if the supply voltage reaches or overpasses the High warning threshold.
OBJECT-TYPE    
  TruthValue  

acdSfpThreshStatusVccLowWarn 1.3.6.1.4.1.22420.2.4.4.1.10
This is to indicate if the supply voltage reaches or underpasses the Low warning threshold.
OBJECT-TYPE    
  TruthValue  

acdSfpThreshStatusLbcHighAlm 1.3.6.1.4.1.22420.2.4.4.1.11
This is to indicate if the Laser Bias Current reaches or overpasses the High alarm threshold.
OBJECT-TYPE    
  TruthValue  

acdSfpThreshStatusLbcLowAlm 1.3.6.1.4.1.22420.2.4.4.1.12
This is to indicate if the Laser Bias Current reaches or underpasses the Low alarm threshold.
OBJECT-TYPE    
  TruthValue  

acdSfpThreshStatusLbcHighWarn 1.3.6.1.4.1.22420.2.4.4.1.13
This is to indicate if the Laser Bias Current reaches or overpasses the High warning threshold.
OBJECT-TYPE    
  TruthValue  

acdSfpThreshStatusLbcLowWarn 1.3.6.1.4.1.22420.2.4.4.1.14
This is to indicate if the Laser Bias Current reaches or underpasses the Low warning threshold.
OBJECT-TYPE    
  TruthValue  

acdSfpThreshStatusTxPwrHighAlm 1.3.6.1.4.1.22420.2.4.4.1.15
This is to indicate if the Transmit Power reaches or overpasses the High alarm threshold.
OBJECT-TYPE    
  TruthValue  

acdSfpThreshStatusTxPwrLowAlm 1.3.6.1.4.1.22420.2.4.4.1.16
This is to indicate if the Transmit Power reaches or underpasses the Low alarm threshold.
OBJECT-TYPE    
  TruthValue  

acdSfpThreshStatusTxPwrHighWarn 1.3.6.1.4.1.22420.2.4.4.1.17
This is to indicate if the Transmit Power reaches or overpasses the High warning threshold.
OBJECT-TYPE    
  TruthValue  

acdSfpThreshStatusTxPwrLowWarn 1.3.6.1.4.1.22420.2.4.4.1.18
This is to indicate if the Transmit Power reaches or underpasses the Low warning threshold.
OBJECT-TYPE    
  TruthValue  

acdSfpThreshStatusRxPwrHighAlm 1.3.6.1.4.1.22420.2.4.4.1.19
This is to indicate if the Receive Power reaches or overpasses the High alarm threshold.
OBJECT-TYPE    
  TruthValue  

acdSfpThreshStatusRxPwrLowAlm 1.3.6.1.4.1.22420.2.4.4.1.20
This is to indicate if the Receive Power reaches or underpasses the Low alarm threshold.
OBJECT-TYPE    
  TruthValue  

acdSfpThreshStatusRxPwrHighWarn 1.3.6.1.4.1.22420.2.4.4.1.21
This is to indicate if the Receive Power reaches or overpasses the High warning threshold.
OBJECT-TYPE    
  TruthValue  

acdSfpThreshStatusRxPwrLowWarn 1.3.6.1.4.1.22420.2.4.4.1.22
This is to indicate if the Receive Power reaches or underpasses the Low warning threshold.
OBJECT-TYPE    
  TruthValue  

acdSfpCompliances 1.3.6.1.4.1.22420.2.4.7.1
OBJECT IDENTIFIER    

acdSfpGroups 1.3.6.1.4.1.22420.2.4.7.2
OBJECT IDENTIFIER    

acdSfpInfoGroup 1.3.6.1.4.1.22420.2.4.7.2.1
Objects for the SFP information Group.
OBJECT-GROUP    

acdSfpDiagGroup 1.3.6.1.4.1.22420.2.4.7.2.2
Objects for the SFP diagnostics Group.
OBJECT-GROUP    

acdSfpThreshGroup 1.3.6.1.4.1.22420.2.4.7.2.3
Objects for the SFP thresholds Group.
OBJECT-GROUP    

acdSfpThreshStatusGroup 1.3.6.1.4.1.22420.2.4.7.2.4
Objects for the SFP threshold status Group.
OBJECT-GROUP    

acdSfpCompliance 1.3.6.1.4.1.22420.2.4.7.1.1
The compliance statement for support of the ACD-SFP-MIB module.
MODULE-COMPLIANCE