A3Com-Filter-r5-MIB

File: A3Com-Filter-r5-MIB.mib (52709 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC1286-MIB
RFC-1212

Imported symbols

enterprises Counter DisplayString
MacAddress OBJECT-TYPE

Defined Types

RowStatus  
INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)    

A3filterUserMaskEntry  
SEQUENCE    
  a3filterUserMaskIndex INTEGER 1..64
  a3filterUserMaskName DisplayString Size(0..15)
  a3filterUserMaskLocType INTEGER
  a3filterUserMaskLocField INTEGER
  a3filterUserMaskLocOffset INTEGER
  a3filterUserMaskLocLength INTEGER
  a3filterUserMaskOperator INTEGER
  a3filterUserMaskOperand STRING Size(0..4)
  a3filterUserMaskComparison INTEGER
  a3filterUserMaskMatchType INTEGER
  a3filterUserMaskMatchBits STRING Size(0..6)
  a3filterUserMaskMatchValue1 INTEGER
  a3filterUserMaskMatchValue2 INTEGER
  a3filterUserMaskStatus RowStatus

A3filterBuiltInMaskEntry  
SEQUENCE    
  a3filterBuiltInMaskIndex INTEGER 257..65535
  a3filterBuiltInMaskName DisplayString Size(0..15)
  a3filterBuiltInMaskFieldValue INTEGER

A3filterUserGrpEntry  
SEQUENCE    
  a3filterUserGrpIndex INTEGER 1..16
  a3filterUserGrpName DisplayString Size(0..15)
  a3filterUserGrpStatus RowStatus

A3filterUserGrpAddrEntry  
SEQUENCE    
  a3filterUserGrpAddrIndex INTEGER 1..16
  a3filterUserGrpAddress MacAddress
  a3filterUserGrpAddrStatus RowStatus

A3filterPolicyEntry  
SEQUENCE    
  a3filterPolicyIndex INTEGER 1..64
  a3filterPolicyName DisplayString Size(0..15)
  a3filterPolicyAction INTEGER
  a3filterPolicyMask1 INTEGER
  a3filterPolicyMask2 INTEGER
  a3filterPolicyMask3 INTEGER
  a3filterPolicyMask4 INTEGER
  a3filterPolicyContext INTEGER
  a3filterPolicyPorts1 STRING
  a3filterPolicyPorts2 STRING
  a3filterPolicyPackets Counter
  a3filterPolicyBytes Counter
  a3filterPolicyStatus RowStatus
  a3filterPolicyX25ProfId INTEGER

Defined Values

a3Com 1.3.6.1.4.1.43
OBJECT IDENTIFIER    

brouterMIB 1.3.6.1.4.1.43.2
OBJECT IDENTIFIER    

a3ComFilter 1.3.6.1.4.1.43.2.10
OBJECT IDENTIFIER    

a3ComFilterCtl 1.3.6.1.4.1.43.2.10.1
OBJECT IDENTIFIER    

a3filterControl 1.3.6.1.4.1.43.2.10.1.1
This object enables/disables the filtering function. If this object is set to disable (2), filtering is turned off for all protocols. If the control is set to enableMatchOne (1) or enableCheckAll (2), then filtering is performed on protocols that are selected via the a3filter*Select objects and those for which at least one policy is configured. If a packet matches the Masks defined for more than one Policy and this object is set to enableMatchOne, only the action associated with the first satisfied Policy is performed. If this object is set to enableCheckAll (2), however, the actions associated with each satisfied Policy is performed.
OBJECT-TYPE    
  INTEGER enableMatchOne(1), enableCheckAll(2), disable(3)  

a3filterDefaultAction 1.3.6.1.4.1.43.2.10.1.2
This object specifies the action applied to a packet if it does not match any of the policies configured or if two conflicting policies are specified and the the packet meets criteria associated with both.
OBJECT-TYPE    
  INTEGER discard(1), forward(2)  

a3filterBridgeSelect 1.3.6.1.4.1.43.2.10.1.3
This object determines whether the filter function will be invoked for the Bridge (or datalink) protocol layer. This provides a mechanism for deselecting filtering for this protocol layer while retaining the policies and masks configured for this protocol.
OBJECT-TYPE    
  INTEGER filter(1), noFilter(2)  

a3filterIpSelect 1.3.6.1.4.1.43.2.10.1.4
This object determines whether the filter function will be invoked for the IP protocol layer. This provides a mechanism for deselecting filtering for this protocol layer while retaining the policies and masks configured for this protocol.
OBJECT-TYPE    
  INTEGER filter(1), noFilter(2)  

a3filterIpxSelect 1.3.6.1.4.1.43.2.10.1.5
This object determines whether the filter function will be invoked for the IPX protocol layer. This provides a mechanism for deselecting filtering for this protocol layer while retaining the policies and masks configured for this protocol.
OBJECT-TYPE    
  INTEGER filter(1), noFilter(2)  

a3filterAppleTalkSelect 1.3.6.1.4.1.43.2.10.1.6
This object determines whether the filter function will be invoked for the Apple Talk protocol layer. This provides a mechanism for deselecting filtering for this protocol layer while retaining the policies and masks configured for this protocol.
OBJECT-TYPE    
  INTEGER filter(1), noFilter(2)  

a3filterDecSelect 1.3.6.1.4.1.43.2.10.1.7
This object determines whether the filter function will be invoked for the DECnet protocol layer. This provides a mechanism for deselecting filtering for this protocol layer while retaining the policies and masks configured for this protocol.
OBJECT-TYPE    
  INTEGER filter(1), noFilter(2)  

a3filterUserMaskTable 1.3.6.1.4.1.43.2.10.2
A table containing User configured Masks that are used to identify specific classes of packets. These masks are used by the policy table to define actions to take on these classes of packets.
OBJECT-TYPE    
  SEQUENCE OF  
    A3filterUserMaskEntry

a3filterUserMaskEntry 1.3.6.1.4.1.43.2.10.2.1
The definition of a single Mask.
OBJECT-TYPE    
  A3filterUserMaskEntry  

a3filterUserMaskIndex 1.3.6.1.4.1.43.2.10.2.1.1
An index identifying a specific Mask. All user configured masks must have an index between 1 and 64.
OBJECT-TYPE    
  INTEGER 1..64  

a3filterUserMaskName 1.3.6.1.4.1.43.2.10.2.1.2
A text string used to help identify a specific Mask. Each entry must have a unique name.
OBJECT-TYPE    
  DisplayString Size(0..15)  

a3filterUserMaskLocType 1.3.6.1.4.1.43.2.10.2.1.3
This object determines if this table entry specifies packet location via the mnemonic, protocol.field semantics or via the numerical offset.length semantics. If this object is set to protocolFieldSemantics (1), then the value of a3filterUserMaskLocField is used to identify the packet location where the mask is applied. If this object is set to offsetLengthSemantics(2), then the offset and lengths identified by a3filterUserMaskLocOffset and a3filterUserMaskLocLength are measured from the start of the datalink layer. If this object is set to dataLinkOffsetLengthSemantics(3), then the value of a3filterUserMaskLocOffset and a3filterUserMaskLocLength are used to determine where the mask is applied. The offset and length are measured starting from the data field of the data link protocol layer. If this object is set to ipOffsetLengthSemantics(4), then the value of a3filterUserMaskLocOffset and a3filterUserMaskLocLength are used to determine where the mask is applied. The offset and length are measured starting from the data field of the IP protocol layer. If this object is set to appleTalkOffsetLengthSemantics(5), then the value of a3filterUserMaskLocOffset and a3filterUserMaskLocLength are used to determine where the mask is applied. The offset and length are measured starting from the data field of the AppleTalk protocol layer. Similar semantics apply to the remaining enumerations for this object.
OBJECT-TYPE    
  INTEGER protocolFieldSemantics(1), offsetLengthSemantics(2), dataLinkOffsetLengthSemantics(3), ipOffsetLengthSemantics(4), ipxOffsetLengthSemantics(5), appleTalkOffsetLengthSemantics(6), decNetOffsetLengthSemantics(7)  

a3filterUserMaskLocField 1.3.6.1.4.1.43.2.10.2.1.4
This object specifies the location in the packet where the operation should take place. This object takes effect only when a3filterUserMaskLocationType has the value protocolFieldSemantics(1). Otherwise, this object is ignored.
OBJECT-TYPE    
  INTEGER dlDestinationAddress(1), dlSourceAddress(2), dlAddress(3), dlProtocol(4), dlLength(5), dlDSAP(6), dlSSAP(7), dlLSAP(8), dlOUI(9), dlLanID(10), ipDestAddress(11), ipSourceAddress(12), ipAddress(13), ipProtocol(14), ipDestinationPort(15), ipSourcePort(16), ipPort(17), ipOptions(18), ipTOS(19), ipxDestNetwork(20), ipxSourceNetwork(21), ipxNetwork(22), ipxDestAddress(23), ipxSourceAddress(24), ipxAddress(25), ipxDestSocket(26), ipxSourceSocket(27), ipxSocket(28), atDestinationNetwork(29), atSourceNetwork(30), atNetwork(31), atDestinationNodeID(32), atSourceNodeID(33), atNodeID(34), atDestinationSocket(35), atSourceSocket(36), atSocket(37), atDDPType(38), decDestinationArea(39), decSourceArea(40), decArea(41), decDestAddress(42), decSourceAddress(43), decAddress(44), ipxPktLength(45), ipxPktType(46), ipxTransportCtl(47)  

a3filterUserMaskLocOffset 1.3.6.1.4.1.43.2.10.2.1.5
When specifying a packet location via the offsetLength semantics, this parameters indicates the offset from the beginning of the portion of the protocol layer identified by a3filterUserMaskLocationType that is used in the Mask.
OBJECT-TYPE    
  INTEGER  

a3filterUserMaskLocLength 1.3.6.1.4.1.43.2.10.2.1.6
When specifying a packet location via the offsetLength semantics, this parameter indicates the length of the bit field used in the Mask. Only the values one(1), two(2), four(4), and six(6) are allowed. If the length is not specified, the agent will automatically determine the proper length based on either the operand (a3filterUserMaskOperand) or the matching values (a3filterUserMaskMatchType).
OBJECT-TYPE    
  INTEGER one(1), two(2), reserved(3), four(4), rsvd(5), six(6)  

a3filterUserMaskOperator 1.3.6.1.4.1.43.2.10.2.1.7
This object, together with a3filterUserMaskOperand, cause bit operations to be performed on the bit field identified by a3filterUserMaskLocation. The output of this operation is compared, according to a3filterUserMaskComparison, to the value specified by a3filterUserMaskMatch.
OBJECT-TYPE    
  INTEGER none(1), or(2), and(3), xor(4)  

a3filterUserMaskOperand 1.3.6.1.4.1.43.2.10.2.1.8
This object, together with a3filterUserMaskOperator, cause bit operations to be performed on the bit field identified by a3filterUserMaskLocation. The output of this operation is compared, according to a3filterUserMaskComparison, to the value specified by a3filterUserMaskMatchType and a3filterUserMaskMatchBits, a3filterUserMaskMatchValue1, and/or a3filterUserMaskMatchValue2 (depending on the value of a3filterUserMaskMatchType. ie, the value of a3filterUserMaskMatchType determines which of the other objects are relevant).
OBJECT-TYPE    
  STRING Size(0..4)  

a3filterUserMaskComparison 1.3.6.1.4.1.43.2.10.2.1.9
This object specifies the type of comparison to make between the output of the operation specified by a3filterUserMaskLocation, a3filterUserMaskOperator, a3filterUserMaskOperand, and a3filterUserMaskMatch.
OBJECT-TYPE    
  INTEGER equal(1), notEqual(2), greaterThan(3), greaterThanOrEqual(4), lessThan(5), lessThanOrEqual(6), inclusiveRange(7)  

a3filterUserMaskMatchType 1.3.6.1.4.1.43.2.10.2.1.10
This object specifies the type of data that is being matched. The value of this object determines which column(s) are relevant for this entry. If this object is set to all(1), any value is considered as matching, and the values of the following columns are ignored: a3filterUserMaskMatchBits, a3filterUserMaskMatchValue1, and a3filterUserMaskMatchValue2. If this object is set to bits(2), then the packet location identified by the *Loc* columns (and after the indicated bit operations) is compared to the bits identified by a3filterUserMaskMatchBits. The values of a3filterUserMaskMatchValue1 and a3filterUserMaskMatchValue2 are ignored in this case. If this object is set to value(3), then the value contained in the specified packet location is compared to the value specified by a3filterUserMaskMatchValue1. The values of a3filterUserMaskMatchBits and a3filterUserMaskMatchValue2 are ignored in this case. If this object is set to valueRange(4), then the value contained in the specified packet location is compared to the range of values specified by a3filterUserMaskMatchValue1 and a3filterUserMaskMatchValue2. The value of a3filterUserMaskMatchBits is ignored in this case. Finally, if this object is set to userGroup(5), then the MAC address contained in the specified packet location is compared to the members of the User Group identified by a3filterUserMaskMatchValue1. In this case, the value of a3filterUserMaskMatchValue1 identifies one or more entries in a3filterUserGrpAddrTable. The values of a3filterUserMaskMatchBits and a3filterUserMaskMatchValue2 are ignored.
OBJECT-TYPE    
  INTEGER all(1), bits(2), value(3), valueRange(4), userGroup(5)  

a3filterUserMaskMatchBits 1.3.6.1.4.1.43.2.10.2.1.11
A string of bits that is compared against the data at the specified location in the packet. This object is relevant only if a3filterUserMaskMatchType is (2).
OBJECT-TYPE    
  STRING Size(0..6)  

a3filterUserMaskMatchValue1 1.3.6.1.4.1.43.2.10.2.1.12
The value used to compare against the data at the specified location in the packet. This object is relevant only if the value of a3filterUserMaskMatchType is (3), (4), or (5).
OBJECT-TYPE    
  INTEGER  

a3filterUserMaskMatchValue2 1.3.6.1.4.1.43.2.10.2.1.13
The value used to compare against the data at the specified location in the packet. This object is used along with a3filterUserMaskMatchValue1 to specify a range of values. This object is relevant only if a3filterUserMaskMatchType is (4).
OBJECT-TYPE    
  INTEGER  

a3filterUserMaskStatus 1.3.6.1.4.1.43.2.10.2.1.14
This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB. Note, if this mask entry is being used by an active Policy entry, it can not be removed.
OBJECT-TYPE    
  RowStatus  

a3filterBuiltInMaskTable 1.3.6.1.4.1.43.2.10.3
A table containing Built In Masks that are used to identify specific classes of packets. These masks may be used by the policy table to define actions to take on these classes of packets.
OBJECT-TYPE    
  SEQUENCE OF  
    A3filterBuiltInMaskEntry

a3filterBuiltInMaskEntry 1.3.6.1.4.1.43.2.10.3.1
The definition of a single Built In Mask.
OBJECT-TYPE    
  A3filterBuiltInMaskEntry  

a3filterBuiltInMaskIndex 1.3.6.1.4.1.43.2.10.3.1.1
This object uniquely identifies a Built In Mask. This index is also used by the Policy Table to identify Masks, both Built In and User Defined.
OBJECT-TYPE    
  INTEGER 257..65535  

a3filterBuiltInMaskName 1.3.6.1.4.1.43.2.10.3.1.2
The name assigned to a Built In Mask. Each name is unique and applies when referring to the Mask from the User Interface.
OBJECT-TYPE    
  DisplayString Size(0..15)  

a3filterBuiltInMaskFieldValue 1.3.6.1.4.1.43.2.10.3.1.3
This object identifies the value that this Built In Mask looks for as well as the protocol field. Note, the way this table defines a Mask is different from the semantics of the User Mask table. In that table, Masks look for specific values in specific protocol fields. Built In Masks, however, are different. For example, one Built In Mask looks for the value ip(9) in the field dataLinkProtocol(2). Besides looking in the dataLinkProtocol field, the code that implements this mask also looks for IP in the proper SNAP field when the dataLinkProtocol field indicates SNAP.
OBJECT-TYPE    
  INTEGER dlBroadCast(1), dlMultiCast(2), appleTalkII(3), aarp(4), arp(5), clnp(6), decPhaseIV(7), dlTest(8), ip(9), ipx(10), lat(11), ipNetMap(12), xnsNetMap(13), stp(14), vip(15), xns(16), specificRoute(17), singleRouteExp(18), allRouteExp(19), allRouteType(20), icmp(21), tcp(22), udp(23), dns(24), finger(25), ftp(26), whois(27), simpleMailTrans(28), snmp(29), sunRPC(30), telnet(31), tftp(32), x400(33), zero(34), one(35), two(36), three(37), four(38), five(39), six(40), seven(41), ipxBroadCast(42), fileServicePkt(43), sap(44), rip(45), netBIOS(46), diag(47), rtmps(48), nis(49), zis(50), rtmprs(51), nbp(52), atp(53), aep(54), rtmprq(55), zip(56), adsp(57), ipxTraceRt(58), ipxPing(59), ipxNwSec(60)  

a3filterUserGrpTable 1.3.6.1.4.1.43.2.10.4
A table containing User Group entries. Each entry identifies a set of entries in the a3filterUserGrpAddrTable which can contain several station Addresses. These addresses are physical layer addresses. This table is used to associate a single User Group index with a name.
OBJECT-TYPE    
  SEQUENCE OF  
    A3filterUserGrpEntry

a3filterUserGrpEntry 1.3.6.1.4.1.43.2.10.4.1
Each entry in this table identifies a group of station addresses.
OBJECT-TYPE    
  A3filterUserGrpEntry  

a3filterUserGrpIndex 1.3.6.1.4.1.43.2.10.4.1.1
Each entry in this table identifies a group of station addresses.
OBJECT-TYPE    
  INTEGER 1..16  

a3filterUserGrpName 1.3.6.1.4.1.43.2.10.4.1.2
The name given to this group of station addresses.
OBJECT-TYPE    
  DisplayString Size(0..15)  

a3filterUserGrpStatus 1.3.6.1.4.1.43.2.10.4.1.3
This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB.
OBJECT-TYPE    
  RowStatus  

a3filterUserGrpAddrTable 1.3.6.1.4.1.43.2.10.5
A table containing User Group addresses. Each entry can contain several station Addresses. These addresses are physical layer addresses. Note, this table applies only to filtering based on the Data Link layer. Since only bridged packets are filtered at this layer, this table only applies to bridged traffic.
OBJECT-TYPE    
  SEQUENCE OF  
    A3filterUserGrpAddrEntry

a3filterUserGrpAddrEntry 1.3.6.1.4.1.43.2.10.5.1
Each entry in this table identifies a single station address.
OBJECT-TYPE    
  A3filterUserGrpAddrEntry  

a3filterUserGrpAddrIndex 1.3.6.1.4.1.43.2.10.5.1.1
This is used to identify a group of station addresses. This object has the same value as a3filterUserGrpIndex.
OBJECT-TYPE    
  INTEGER 1..16  

a3filterUserGrpAddress 1.3.6.1.4.1.43.2.10.5.1.2
A single station physical address.
OBJECT-TYPE    
  MacAddress  

a3filterUserGrpAddrStatus 1.3.6.1.4.1.43.2.10.5.1.3
This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB.
OBJECT-TYPE    
  RowStatus  

a3filterPolicyTable 1.3.6.1.4.1.43.2.10.6
A table containing filtering Policy. Each Policy applies a set of selection criteria (Masks) to a context (in terms of ports or station groups) and associates an action with that application.
OBJECT-TYPE    
  SEQUENCE OF  
    A3filterPolicyEntry

a3filterPolicyEntry 1.3.6.1.4.1.43.2.10.6.1
The definition of a single Policy.
OBJECT-TYPE    
  A3filterPolicyEntry  

a3filterPolicyIndex 1.3.6.1.4.1.43.2.10.6.1.1
The index used to identify a filter policy entry.
OBJECT-TYPE    
  INTEGER 1..64  

a3filterPolicyName 1.3.6.1.4.1.43.2.10.6.1.2
A textual name used to help identify a filter policy entry. Each entry must have a unique name.
OBJECT-TYPE    
  DisplayString Size(0..15)  

a3filterPolicyAction 1.3.6.1.4.1.43.2.10.6.1.3
The action taken when a packet matches all the masks (applied in the proper context) identified in this policy entry. If this object has the value discard(1), then all packets that match the masks and context of this entry are discarded. If this object has the value forward(2), then all packets that match the masks and context of this entry are forwarded. If this object has the value count(3), then all packets that match the masks and context of this entry are counted. The actual counts can be obtained by requesting the values of a3filterPolicyPackets and a3filterPolicyBytes. If this object has the value sequence(4), then all bridged packets destined for a port with multiple serial paths that match the masks and context of this entry are forwarded in sequence. If this object has the value prioritze, then all packets destined for a port supported by one or more serial paths that match the masks and context of this entry are given higher priority. If this object has the value doddiscard(8), then all packets that match the masks and context of this entry will be subjected to the 'DODdiscard' action; ie, those packets will be discarded and will not raise a DOD path if the path is down, or if the path is UP, those packets will be forwarded but will not keep the path up. If this object has the value x25ProfId(9), then all packets that match the masks and context of this entry will use the X25 Profile identified by a3filterPolicyX25ProfId when passing those packets over an X25 network.
OBJECT-TYPE    
  INTEGER discard(1), forward(2), count(3), sequence(4), prioritizeHigh(5), prioritizeMed(6), prioritizeLow(7), doddiscard(8), x25ProfId(9)  

a3filterPolicyMask1 1.3.6.1.4.1.43.2.10.6.1.4
This object identifies an entry in either of the Mask Tables. Each filter policy entry identifies up to four separate masks. An entry of zero for this object identifies a null mask.
OBJECT-TYPE    
  INTEGER  

a3filterPolicyMask2 1.3.6.1.4.1.43.2.10.6.1.5
This object identifies an entry in either of the Mask Tables. Each filter policy entry identifies up to four separate masks. An entry of zero for this object identifies a null mask.
OBJECT-TYPE    
  INTEGER  

a3filterPolicyMask3 1.3.6.1.4.1.43.2.10.6.1.6
This object identifies an entry in the Mask Table. Each filter policy entry identifies up to four separate masks. An entry of zero for this object identifies a null mask.
OBJECT-TYPE    
  INTEGER  

a3filterPolicyMask4 1.3.6.1.4.1.43.2.10.6.1.7
This object identifies an entry in the Mask Table. Each filter policy entry identifies up to four separate masks. An entry of zero for this object identifies a null mask.
OBJECT-TYPE    
  INTEGER  

a3filterPolicyContext 1.3.6.1.4.1.43.2.10.6.1.8
Supplies conditions on when to apply the masks to a packet. These conditions relate to the source and destination ports of a packet. All (1) means apply the action in all contexts. AT (2) means apply the action if the packet is received from or distined to the ports specified by a3filterPolicyPorts1. TO (3) means apply the action if the packet is destined to those ports. FROM (4) means apply the action if the packet is received from one of those specified ports. FROM ports1 TO ports2 (5) means apply the action if the packet is received from the ports defined by a3filterPolicyPorts1 and destined to the port defined by a3filterPolicyPorts2. BETWEEN ports1 AND ports2 (6) means apply the action if the packet is received from one of the ports defined by a3filterPolicyPorts1 and destined for one of the ports defined by a3filterPolicyPorts2 or if the packet is received from one of the ports defined by a3filterPolicyPorts2 and destined for one of the ports defined by a3filterPolicyPorts1. Finally AMONG (7) means apply the action if the packet is received from and destined to one of the ports specified by a3filterPolicyPorts1
OBJECT-TYPE    
  INTEGER all(1), atPorts1(2), fromPorts1(3), fromPorts1ToPorts2(4), toPorts1(5), betweenPorts1AndPorts2(6), amongPorts1(7)  

a3filterPolicyPorts1 1.3.6.1.4.1.43.2.10.6.1.9
This object identifies one or more ports. These ports are used to help identify in what contexts masks are applied. This is used in conjunction with a3filterPolicyContext. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.)
OBJECT-TYPE    
  STRING  

a3filterPolicyPorts2 1.3.6.1.4.1.43.2.10.6.1.10
This object identifies one or more ports. These ports are used to help identify in what contexts masks are applied. This is used in conjunction with a3filterPolicyContext. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) Note, this object only applies if a3filterPolicyContext has the value fromPorts1ToPorts2 (5) or betweenPorts1AndPorts2 (6) or amongPorts1(7).
OBJECT-TYPE    
  STRING  

a3filterPolicyPackets 1.3.6.1.4.1.43.2.10.6.1.11
The number of packets that match the policy defined by this entry.
OBJECT-TYPE    
  Counter  

a3filterPolicyBytes 1.3.6.1.4.1.43.2.10.6.1.12
The total number of bytes in the packets that match the policy defined by this entry.
OBJECT-TYPE    
  Counter  

a3filterPolicyStatus 1.3.6.1.4.1.43.2.10.6.1.13
This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB.
OBJECT-TYPE    
  RowStatus  

a3filterPolicyX25ProfId 1.3.6.1.4.1.43.2.10.6.1.14
The index used to identify the X25 Profile ID if a3filterPolicyAction is set to X25ProfId.
OBJECT-TYPE    
  INTEGER