PDN-MPE-HEALTH-AND-STATUS-MIB DEFINITIONS ::= BEGIN -- Last-Updated: 6/16/00 -- Enterprise Health and Status MIB (mpe support) -- Copyright (C) 2000 Paradyne Corporation. -- -- Created by : Wayne Jadoo / Prakash Easwar IMPORTS DisplayString FROM SNMPv2-TC OBJECT-TYPE FROM RFC-1212 entPhysicalIndex FROM ENTITY-MIB mpe-devHealth FROM PDN-HEADER-MIB TRAP-TYPE FROM RFC-1215 ; mpeDevHealthAndStatusMIBObjects OBJECT IDENTIFIER ::= { mpe-devHealth 1 } mpeDevHealthAndStatusMIBTraps OBJECT IDENTIFIER ::= { mpe-devHealth 2 } -- groups for Paradyne health and Status MIB mpeDevHealthAndStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpeDevHealthAndStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table that contains information about an Entity's health." ::= { mpeDevHealthAndStatusMIBObjects 1 } mpeDevHealthAndStatusEntry OBJECT-TYPE SYNTAX MpeDevHealthAndStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of information for an entity's health." INDEX { entPhysicalIndex } ::= { mpeDevHealthAndStatusTable 1 } MpeDevHealthAndStatusEntry ::= SEQUENCE { mpeDevSelfTestResults DisplayString } mpeDevSelfTestResults OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Self-test results. Self-test (or power-up test) results summarizes the test results of each CCA, where each CCA test result is separated by a semi-colon. Refer to device-specific user documentation for a complete description of the self test codes and messages." ::= { mpeDevHealthAndStatusEntry 1 } -- Traps for Device failure mpeSelfTestFailure TRAP-TYPE ENTERPRISE mpeDevHealthAndStatusMIBTraps VARIABLES { mpeDevSelfTestResults } DESCRIPTION "This trap signifies that the sending protocol's device has failed self test. The variable binding for this trap would be the selfTest devSelfTestResults object of the Health and Status MIB. The exact format of this display string will be well-documented in the Operational Specifications of the device." ::= 1 END