-- 3Com Switching Systems Management Information Base -- Version 1.0.0 -- February 13, 1998 -- 3Com Corporation -- 80 Central Street -- Boxborough, MA 01719 -- (508) 264-1400 ---------------------------------------------------------------------------------------- -- 04/27/99 - tmeiczin Broke apart from 3cSys.mib ---------------------------------------------------------------------------------------- A3COM-SWITCHING-SYSTEMS-SMT-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, Counter, IpAddress FROM RFC1155-SMI DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212; -- -- Object identifiers -- a3Com OBJECT IDENTIFIER ::= { enterprises 43 } switchingSystemsMibs OBJECT IDENTIFIER ::= { a3Com 29 } a3ComSwitchingSystemsMib OBJECT IDENTIFIER ::= { switchingSystemsMibs 4 } -- a3ComSwitchingSystemsMib groups. a3ComSysSmt OBJECT IDENTIFIER ::= { a3ComSwitchingSystemsMib 9 } -- The Switching Systems MIB SMT group. Implementation of this group is -- mandatory for agents which manage SMT resources. a3ComSysSmtCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The count of SMTs managed by this agent." ::= { a3ComSysSmt 1 } -- The Switching Systems MIB SMT table. -- This table is currently unused and is reserved for future use. -- { a3ComSysSmt 2 } -- The Switching Systems MIB SMT FDDI MAC table. -- This table is currently unused and is reserved for future use. -- { a3ComSysSmt 3 } -- a3ComSysSmtFddiMacBeaconTable OBJECT-TYPE -- Currently not supported. -- ::= { a3ComSysSmt 4 } -- The Switching Systems MIB SMT FDDI MAC rate table. a3ComSysSmtFddiMacRateTable OBJECT-TYPE SYNTAX SEQUENCE OF A3ComSysSmtFddiMacRateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of FDDI MAC rate entries. A single entry exists in this list for each FDDI MAC, managed by this agent, which supports rate statistics." ::= { a3ComSysSmt 5 } a3ComSysSmtFddiMacRateEntry OBJECT-TYPE SYNTAX A3ComSysSmtFddiMacRateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An FDDI MAC rate entry contains rate statistics for a particular FDDI MAC managed by this agent. Rate statistics are calculated based on a one second sampling interval." INDEX { a3ComSysSmtFddiMacRateSmtIndex, a3ComSysSmtFddiMacRateIndex } ::= { a3ComSysSmtFddiMacRateTable 1 } A3ComSysSmtFddiMacRateEntry ::= SEQUENCE { a3ComSysSmtFddiMacRateSmtIndex INTEGER, a3ComSysSmtFddiMacRateIndex INTEGER, a3ComSysSmtFddiMacRateByteReceiveRate INTEGER, a3ComSysSmtFddiMacRatePeakByteReceiveRate INTEGER, a3ComSysSmtFddiMacRateFrameReceiveRate INTEGER, a3ComSysSmtFddiMacRatePeakFrameReceiveRate INTEGER, a3ComSysSmtFddiMacRateByteTransmitRate INTEGER, a3ComSysSmtFddiMacRatePeakByteTransmitRate INTEGER, a3ComSysSmtFddiMacRateFrameTransmitRate INTEGER, a3ComSysSmtFddiMacRatePeakFrameTransmitRate INTEGER } a3ComSysSmtFddiMacRateSmtIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The index of the SMT instance identified by this entry, relative to this agent." ::= { a3ComSysSmtFddiMacRateEntry 1 } a3ComSysSmtFddiMacRateIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The index of the FDDI MAC identified by this entry, within the SMT identified by this entry." ::= { a3ComSysSmtFddiMacRateEntry 2 } a3ComSysSmtFddiMacRateByteReceiveRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average number of bytes received per second by the FDDI MAC identified by this entry during the most recent sampling period." ::= { a3ComSysSmtFddiMacRateEntry 3 } a3ComSysSmtFddiMacRatePeakByteReceiveRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of a3ComSysSmtFddiMacByteReceiveRate since the system was last initialized for the FDDI MAC identified by this entry." ::= { a3ComSysSmtFddiMacRateEntry 4 } a3ComSysSmtFddiMacRateFrameReceiveRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average number of frames received per second by the FDDI MAC identified by this entry during the most recent sampling period." ::= { a3ComSysSmtFddiMacRateEntry 5 } a3ComSysSmtFddiMacRatePeakFrameReceiveRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of a3ComSysSmtFddiMacRateFrameReceiveRate since the system was last initialized for the FDDI MAC identified by this entry." ::= { a3ComSysSmtFddiMacRateEntry 6 } a3ComSysSmtFddiMacRateByteTransmitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average number of bytes transmitted per second by the FDDI MAC identified by this entry during the most recent sampling period." ::= { a3ComSysSmtFddiMacRateEntry 7 } a3ComSysSmtFddiMacRatePeakByteTransmitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of a3ComSysSmtFddiMacByteTransmitRate since the system was last initialized for the FDDI MAC identified by this entry." ::= { a3ComSysSmtFddiMacRateEntry 8 } a3ComSysSmtFddiMacRateFrameTransmitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The average number of frames transmitted per second by the FDDI MAC identified by this entry during the most recent sampling period." ::= { a3ComSysSmtFddiMacRateEntry 9 } a3ComSysSmtFddiMacRatePeakFrameTransmitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of a3ComSysSmtFddiMacFrameTransmitRate since the system was last initialized for the FDDI MAC identified by this entry." ::= { a3ComSysSmtFddiMacRateEntry 10 } -- The Switching Systems MIB SMT FDDI port table. a3ComSysSmtFddiPortTable OBJECT-TYPE SYNTAX SEQUENCE OF A3ComSysSmtFddiPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of FDDI port entries. A single entry exists in this list for each FDDI port managed by this agent." ::= { a3ComSysSmt 6 } a3ComSysSmtFddiPortEntry OBJECT-TYPE SYNTAX A3ComSysSmtFddiPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An FDDI port entry contains information about a particular FDDI port managed by this agent." INDEX { a3ComSysSmtFddiPortSmtIndex, a3ComSysSmtFddiPortIndex } ::= { a3ComSysSmtFddiPortTable 1 } A3ComSysSmtFddiPortEntry ::= SEQUENCE { a3ComSysSmtFddiPortSmtIndex INTEGER, a3ComSysSmtFddiPortIndex INTEGER, a3ComSysSmtFddiPortLocationType INTEGER, a3ComSysSmtFddiPortLocationTypeIndex INTEGER, a3ComSysSmtFddiPortLocationLocalIndex INTEGER, a3ComSysSmtFddiPortLabel DisplayString, a3ComSysSmtFddiPortSystemPhysicalConnectorId INTEGER } a3ComSysSmtFddiPortSmtIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The index of the SMT instance identified by this entry, relative to this agent." ::= { a3ComSysSmtFddiPortEntry 1 } a3ComSysSmtFddiPortIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The index of the FDDI port identified by this entry, within the SMT identified by this entry." ::= { a3ComSysSmtFddiPortEntry 2 } a3ComSysSmtFddiPortLocationType OBJECT-TYPE SYNTAX INTEGER { other(1), modularSlot(2), chassis(3), modularCard(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of location where the FDDI port identified by this entry is physically located." ::= { a3ComSysSmtFddiPortEntry 3 } a3ComSysSmtFddiPortLocationTypeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the location identified by the corresponding instance of a3ComSysSmtFddiPortLocationType where the FDDI port identified by this entry is physically located." ::= { a3ComSysSmtFddiPortEntry 4 } a3ComSysSmtFddiPortLocationLocalIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The local index of the FDDI port identified by this entry relative to the location specified by the corresponding values of a3ComSysSmtFddiPortLocationType and a3ComSysSmtFddiPortLocationTypeIndex." ::= { a3ComSysSmtFddiPortEntry 5 } a3ComSysSmtFddiPortLabel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..31)) ACCESS read-write STATUS mandatory DESCRIPTION "An ASCII text string describing the FDDI port identified by this entry." ::= { a3ComSysSmtFddiPortEntry 6 } a3ComSysSmtFddiPortSystemPhysicalConnectorId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The actual physical connector that corresponds to the values of a3ComSysSmtFddiPortLocationType a3ComSysSmtFddiPortLocationTypeIndex a3ComSysSmtFddiPortLocationLocalIndex." ::= { a3ComSysSmtFddiPortEntry 7 } -- a3ComSysSmtFddiMacLocationTable OBJECT-TYPE -- Currently reserved for future use. -- ::= { a3ComSysSmt 7 } -- a3ComSysSmtFddiMacStationTable OBJECT-TYPE -- Currently reserved for future use. -- ::= { a3ComSysSmt 8 } -- a3ComSysSmtFddiPortStationTable OBJECT-TYPE -- Currently reserved for future use. -- ::= { a3ComSysSmt 9 } -- the a3ComSysSmtFddiStationModeTable a3ComSysSmtFddiStationModeTable OBJECT-TYPE SYNTAX SEQUENCE OF A3ComSysSmtFddiStationModeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An FDDI station Mode table contains information to assign an FDDI Station to DAS(dual attached) or SAS(single attached) mode. The system must be rebooted after all changes to this table are completed in order that the changes take effect. " ::= { a3ComSysSmt 10 } a3ComSysSmtFddiStationModeEntry OBJECT-TYPE SYNTAX A3ComSysSmtFddiStationModeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An FDDI Port entry contains information to assign an FDDI Port to an FDDI Station " INDEX { a3ComSysSmtFddiStationModeIndex, a3ComSysSmtFddiStationModePortIndex } ::= { a3ComSysSmtFddiStationModeTable 1 } A3ComSysSmtFddiStationModeEntry ::= SEQUENCE { a3ComSysSmtFddiStationModeIndex INTEGER, a3ComSysSmtFddiStationModePortIndex INTEGER, a3ComSysSmtFddiStationModeSelectablePorts INTEGER, a3ComSysSmtFddiStationModeCurrentMode INTEGER, a3ComSysSmtFddiStationModeRequestedMode INTEGER } a3ComSysSmtFddiStationModeIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the SMT instance identified by this entry, relative to this agent " ::= { a3ComSysSmtFddiStationModeEntry 1 } a3ComSysSmtFddiStationModePortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The index of the Port instance identified by this entry, relative to the SMT indentified by this entry." ::= { a3ComSysSmtFddiStationModeEntry 2 } a3ComSysSmtFddiStationModeSelectablePorts OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "An implementation specific entry that corresponds to a port pair, based on the hardware implementation. Only ports with a value of 1 are configurable, those with a value of 0 are not." ::= { a3ComSysSmtFddiStationModeEntry 3 } a3ComSysSmtFddiStationModeCurrentMode OBJECT-TYPE SYNTAX INTEGER { sas-m(1), sas-s(2), das(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the current SAS or DAS mode of the port(s) instance relative to the SMT instance. A value of 1 indicates SAS(M). A value of 2 indicates SAS(S) and a value of 3 indicates DAS." ::= { a3ComSysSmtFddiStationModeEntry 4 } a3ComSysSmtFddiStationModeRequestedMode OBJECT-TYPE SYNTAX INTEGER { sas-m(1), sas-s(2), das(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the requested mode for a given port pair. A value of 1 indicates a request for SAS(M) for the corresponding pair. A value of 2 indicates SAS(S) and a value of 3 indicates DAS. It should be noted that if requested mode is different than current mode a reboot is required to enable the requested mode. NOTE: reboot can be accomplished using a3ComSysSystemAction." ::= { a3ComSysSmtFddiStationModeEntry 5 } END