ZYXEL-ves1724-56-MIB

File: ZYXEL-ves1724-56-MIB.mib (596163 bytes)

Imported modules

RFC1155-SMI SNMPv2-SMI SNMPv2-TC
RFC1213-MIB P-BRIDGE-MIB Q-BRIDGE-MIB
BRIDGE-MIB IF-MIB SNMP-FRAMEWORK-MIB
INET-ADDRESS-MIB DISMAN-PING-MIB VDSL-LINE-MIB
IEEE8021-CFM-MIB VDSL2-LINE-TC-MIB VDSL2-LINE-MIB
IPV6-TC HC-PerfHist-TC-MIB

Imported symbols

enterprises Integer32 Counter32
Counter64 TimeTicks Unsigned32
OBJECT-TYPE RowStatus DateAndTime
TruthValue StorageType MacAddress
DisplayString EnabledStatus PortList
dot1dBasePort InterfaceIndexOrZero SnmpAdminString
InetAddressType InetAddress OperationResponseStatus
vdslLineConfProfileName vdslLineAlarmConfProfileName vdslPerf1DayIntervalNumber
vdslPhysSide ifIndex vdslPerfIntervalNumber
dot1qVlanIndex Dot1agCfmMepId Xdsl2RaMode
Xdsl2LineLdsf xdsl2PMChHist1DInterval xdsl2LineBand
xdsl2LineSegmentDirection xdsl2LineSegment xdsl2ChStatusUnit
xdsl2SCStatusDirection xdsl2SCStatusBand xdsl2PMLHist15MUnit
xdsl2PMLHist15MInterval xdsl2PMLHist1DUnit xdsl2PMLHist1DInterval
xdsl2PMChCurrUnit xdsl2PMChHist15MUnit xdsl2PMChHist15MInterval
xdsl2PMLCurrUnit xdsl2PMChHist1DUnit xdsl2LConfTempTemplateName
xdsl2LConfProfProfileName xdsl2ChConfProfProfileName xdsl2LAlarmConfTempTemplateName
xdsl2LineAlarmConfProfileName xdsl2ChAlarmConfProfileName IpAddress
Ipv6Address NOTIFICATION-TYPE sysObjectID
BridgeId Timeout HCPerfIntervalThreshold
HCPerfTimeElapsed

Defined Types

Vdsl2Band  
Identifies a band in a VDSL2/ADSL/ADSL2/ADSL2+ link. For a band in the upstream direction, transmission is from the remote end (xTU-R) towards the central office end (xTU-C). A band in the upstream direction is indicated by upstream(1) for ADSL/ADSL2/ADSL2+ single band, or any of us0(3), us1(5), us2(7), us3(9), or us4(11) for VDSL2 multiple bands. For a band in the downstream direction, transmission is from the xTU-C towards the xTU-R. A band in the downstream direction is indicated by downstream(2) for ADSL/ADSL2/ADSL2+ single band, or any of ds1(4), ds2(6), ds3(8), or ds4(10) for VDSL2 multiple bands. Specified as an INTEGER, the values are defined as follows:
TEXTUAL-CONVENTION    
  INTEGER upstream(1), downstream(2), us0(3), ds1(4), us1(5), ds2(6), us2(7), ds3(8), us3(9), ds4(10), us4(11)  

BrLimitPortEntry  
SEQUENCE    
  brLimitPortBrState EnabledStatus
  brLimitPortBrRate INTEGER
  brLimitPortMcState EnabledStatus
  brLimitPortMcRate INTEGER
  brLimitPortDlfState EnabledStatus
  brLimitPortDlfRate INTEGER

PortSecurityPortEntry  
SEQUENCE    
  portSecurityPortState EnabledStatus
  portSecurityPortLearnState EnabledStatus
  portSecurityPortCount INTEGER

VlanTrunkPortEntry  
SEQUENCE    
  vlanTrunkPortState EnabledStatus

CtlProtTransTunnelPortEntry  
SEQUENCE    
  ctlProtTransTunnelMode INTEGER

VlanStackPortEntry  
SEQUENCE    
  vlanStackPortMode INTEGER
  vlanStackPortVid INTEGER
  vlanStackPortPrio INTEGER
  vlanStackTunnelPortTpid INTEGER
  vlanStackPCopyCtagPrio EnabledStatus

SelectiveQinQEntry  
SEQUENCE    
  selectiveQinQName DisplayString
  selectiveQinQPort INTEGER
  selectiveQinQCvid INTEGER
  selectiveQinQSpvid INTEGER
  selectiveQinQPriority INTEGER
  selectiveQinQRowStatus RowStatus
  selectiveQinQACtivePrio EnabledStatus

PortBasedInnerQEntry  
SEQUENCE    
  portBasedInnerQVid INTEGER
  portBasedInnerQPrio INTEGER
  portBasedInnerQActive EnabledStatus
  portBasedInnerQTxUntag EnabledStatus

PortAuthEntry  
SEQUENCE    
  portAuthEntryState EnabledStatus
  portReAuthEntryState EnabledStatus
  portReAuthEntryTimer INTEGER

FanRpmEntry  
SEQUENCE    
  fanRpmIndex INTEGER
  fanRpmCurValue INTEGER
  fanRpmMaxValue INTEGER
  fanRpmMinValue INTEGER
  fanRpmLowThresh INTEGER
  fanRpmDescr DisplayString

TempEntry  
SEQUENCE    
  tempIndex INTEGER
  tempCurValue INTEGER
  tempMaxValue INTEGER
  tempMinValue INTEGER
  tempHighThresh INTEGER
  tempDescr DisplayString

VoltageEntry  
SEQUENCE    
  voltageIndex INTEGER
  voltageCurValue INTEGER
  voltageMaxValue INTEGER
  voltageMinValue INTEGER
  voltageNominalValue INTEGER
  voltageLowThresh INTEGER
  voltageDescr DisplayString

SnmpTrapDestEntry  
SEQUENCE    
  snmpTrapDestIP IpAddress
  snmpTrapDestRowStatus RowStatus
  snmpTrapDestPort INTEGER
  snmpTrapVersion INTEGER
  snmpTrapUserName DisplayString

SnmpTrapGroupEntry  
SEQUENCE    
  snmpTrapSystemGroup BITS
  snmpTrapInterfaceGroup BITS
  snmpTrapAAAGroup BITS
  snmpTrapSwitchGroup BITS
  snmpTrapVdslGroup BITS

SnmpUserEntry  
SEQUENCE    
  snmpUserName DisplayString
  snmpUserSecurityLevel INTEGER
  snmpUserAuthProtocol INTEGER
  snmpUserPrivProtocol INTEGER

SnmpTrapDestInfoEntry  
SEQUENCE    
  snmpTrapDestInfoIpAddrType InetAddressType
  snmpTrapDestInfoIpAddr InetAddress
  snmpTrapDestInfoRowStatus RowStatus
  snmpTrapDestInfoPort INTEGER
  snmpTrapDestInfoVersion INTEGER
  snmpTrapDestInfoUserName DisplayString

SnmpTrapGroupInfoEntry  
SEQUENCE    
  snmpTrapGroupInfoSystemGroup BITS
  snmpTrapGroupInfoInterfaceGroup BITS
  snmpTrapGroupInfoAAAGroup BITS
  snmpTrapGroupInfoSwitchGroup BITS
  snmpTrapGroupInfoVdslGroup BITS

RmtFwUpgradeStatusEntry  
SEQUENCE    
  rmtFwUpgradeStatus INTEGER

RmtFwStatusEntry  
SEQUENCE    
  rmtFwStatus DisplayString

SysLoginSetupEntry  
SEQUENCE    
  sysLoginName DisplayString
  sysLoginPassword DisplayString
  sysLoginPrivilege INTEGER
  sysLoginRowStatus RowStatus

IgmpsnpVlanEntry  
SEQUENCE    
  igmpsnpVid INTEGER
  igmpsnpVlanName DisplayString
  igmpsnpVlanRowStatus RowStatus

InbandIpEntry  
SEQUENCE    
  inbandEntryIp IpAddress
  inbandEntrySubnetMask IpAddress
  inbandEntryGateway IpAddress
  inbandEntryVid INTEGER
  inbandEntryManageable EnabledStatus
  inbandEntryRowStatus RowStatus

FilterEntry  
SEQUENCE    
  filterName DisplayString
  filterActionState INTEGER
  filterMacAddr MacAddress
  filterVid INTEGER
  filterRowStatus RowStatus

MirrorEntry  
SEQUENCE    
  mirrorMirroredState EnabledStatus
  mirrorDirection INTEGER

AggrGroupEntry  
SEQUENCE    
  aggrGroupIndex INTEGER
  aggrGroupState EnabledStatus
  aggrGroupDynamicState EnabledStatus

AggrPortEntry  
SEQUENCE    
  aggrPortGroup INTEGER
  aggrPortDynamicStateTimeout INTEGER

AccessCtlEntry  
SEQUENCE    
  accessCtlService INTEGER
  accessCtlEnable EnabledStatus
  accessCtlServicePort INTEGER
  accessCtlTimeout INTEGER

SecuredClientEntry  
SEQUENCE    
  securedClientIndex INTEGER
  securedClientEnable EnabledStatus
  securedClientStartIp IpAddress
  securedClientEndIp IpAddress
  securedClientService BITS
  securedClientIpAddrType InetAddressType
  securedClientStartIpAddr InetAddress
  securedClientEndIpAddr InetAddress

PortQueuingMethodEntry  
SEQUENCE    
  portQueuingMethodQueue INTEGER
  portQueuingMethodWeight INTEGER

PortQueuingMethodGeSpqEntry  
SEQUENCE    
  portQueuingMethodGeSpq INTEGER

GlobalDhcpRelayRemoteServerEntry  
SEQUENCE    
  globalDhcpRelayRemoteServerIp IpAddress
  globalDhcpRelayRemoteServerRowStatus RowStatus

DhcpRelayEntry  
SEQUENCE    
  dhcpRelayOption82Enable EnabledStatus
  dhcpRelayInfoData DisplayString
  dhcpRelayRemoteIDEnable EnabledStatus
  dhcpRelayRemoteIDData DisplayString
  dhcpRelayInfoType INTEGER
  dhcpRelayRemoteIDType INTEGER

DhcpRelayRemoteServerEntry  
SEQUENCE    
  dhcpRelayVid INTEGER
  dhcpRelayRemoteServerIp IpAddress
  dhcpRelayRemoteServerRowStatus RowStatus

StaticRouteEntry  
SEQUENCE    
  staticRouteName DisplayString
  staticRouteIp IpAddress
  staticRouteMask IpAddress
  staticRouteGateway IpAddress
  staticRouteMetric INTEGER
  staticRouteRowStatus RowStatus

ArpEntry  
SEQUENCE    
  arpIndex INTEGER
  arpIpAddr IpAddress
  arpMacAddr MacAddress
  arpMacVid INTEGER
  arpType INTEGER

PortOpModePortEntry  
SEQUENCE    
  portOpModePortSpeedDuplex INTEGER
  portOpModePortFlowCntl INTEGER
  portOpModePortName OCTET STRING
  portOpModePortModuleType INTEGER
  portOpModePortLinkUpType INTEGER
  portOpModePortIntrusionLock EnabledStatus
  portOpModePortLBTestSetup INTEGER
  portOpModePortLBTestStatus INTEGER
  portOpModePortSwCounterReset INTEGER
  portOpModePortVdslCounterReset INTEGER
  portOpModePortVdslStatus INTEGER
  portOpModePortVdslUptime OCTET STRING

PortOpModePortLBEntry  
SEQUENCE    
  portOpModePortLBActive INTEGER
  portOpModePortLBNumber INTEGER
  portOpModePortLBCount INTEGER
  portOpModePortLBPktSize INTEGER

PortOpModePortLBResultEntry  
SEQUENCE    
  portOpModePortLBMaxRTT INTEGER
  portOpModePortLBMinRTT INTEGER
  portOpModePortLBAvgRTT INTEGER
  portOpModePortLBPktLossRate INTEGER
  portOpModePortLBStatus INTEGER

PortBasedVlanPortListEntry  
SEQUENCE    
  portBasedVlanPortListMembers OCTET STRING

UtcTimeStamp  
Universal Time Coordinated as a 32-bit value that designates the number of seconds since Jan 1, 1970 12:00AM.
TEXTUAL-CONVENTION    
  Unsigned32  

EventIdNumber  
This textual convention describes the index that uniquely identifies a fault event type in the entire system. Every fault event type, e.g. link down, has a unique EventIdNumber.
TEXTUAL-CONVENTION    
  Integer32  

EventSeverity  
This textual convention describes the severity of a fault event. The decreasing order of severity is shown in the textual convention.
TEXTUAL-CONVENTION    
  INTEGER critical(1), major(2), minor(3), informational(4)  

EventServiceAffective  
This textual convention indicates whether an event is immediately service affecting or not.
TEXTUAL-CONVENTION    
  INTEGER noServiceAffected(1), serviceAffected(2)  

InstanceType  
This textual convention describes the type of an instanceId associated with each event and by that means specifies how the instanceId variable should be intepreted. Various instanceId types are specified below to enable fault monitoring for different kind of devices from fixed configuration pizza boxes to multi chassis nodes. All instanceId types may not need to be used in every device type. Note also that instanceId semantics are element type dependent (e.g. different kind of interface naming conventions may be used) and thus instanceId usage may vary from element to element. ========================================================================= Type Description Example form of InstanceId ========================================================================= unknown (1) unknown type - Irrelevant- ------------------------------------------------------------------------- node (2) Associated with events originating from 1 the node. Used for general events that (Node number) can not be associated with any specific block. InstanceId value 1 is used for single node equipment. ------------------------------------------------------------------------- shelf (3) Associated with events originating from 1 the shelf. In the case of fixed (shelf number) configuration devices this type is used for events that are associated with the physical enclosure, e.g. faults related to fan etc. InstanceId value 1 is used for single self equipment. ------------------------------------------------------------------------- line (4) Associated with events originating from physical interfaces or associated components such as line cards. InstanceId usage examples for faults originating from: - Physical port: Simply port number, e.g. .......1 ------------------------------------------------------------------------- switch (5) Associated with events originating from 1 from a switch chip or a switch card. (switch number) For single switch equipment InstanceId value 1 is used, for multi swich nodes InstanceId semantics if for further study. ------------------------------------------------------------------------- lsp (6) Associated with events originating from 1 a particular lsp. (lsp index) NOTE: In this case the InstanceName contains the lsp name and InstanceId contains lsp index. ------------------------------------------------------------------------- l2Interface(7) Associated with events originating from - TBD - a particular layer 2 interface. Used for layer 2 related events such as L2 control protocol faults. InstanceId semantics is for further study. ------------------------------------------------------------------------- l3Interface(8) Associated with events originating from - TBD - a particular layer 3 interface. Used for layer 3 related events such as L3 control protocol faults. InstanceId semantics is for further study. ------------------------------------------------------------------------- rowIndex (9) Associated with events reporting about a 'logical' or conceptual table that consists of rows. The Instance Id is the index/key for a row in the table. The format of the Instance Id will simply be a series of decimal numbers seperated by a '.': =========================================================================
TEXTUAL-CONVENTION    
  INTEGER unknown(1), node(2), shelf(3), line(4), switch(5), lsp(6), l2Interface(7), l3Interface(8), rowIndex(9)  

EventEntry  
SEQUENCE    
  eventSeqNum Integer32
  eventEventId EventIdNumber
  eventName DisplayString
  eventInstanceType InstanceType
  eventInstanceId DisplayString
  eventInstanceName DisplayString
  eventSeverity EventSeverity
  eventSetTime UtcTimeStamp
  eventDescription DisplayString
  eventServAffective EventServiceAffective
  eventInstanceIdNumber Integer32

EventPersistence  
This textual convention indicates whether the event is delta (automatically and immediately cleared) or normal (not automatically cleared).
TEXTUAL-CONVENTION    
  INTEGER normal(1), delta(2)  

MulticastPortEntry  
SEQUENCE    
  multicastPortImmediateLeave EnabledStatus
  multicastPortMaxGroupLimited EnabledStatus
  multicastPortMaxOfGroup INTEGER
  multicastPortIgmpFilteringProfile DisplayString
  multicastPortQueryMode INTEGER
  igmpMsgMaxLimited EnabledStatus
  igmpMsgLimit INTEGER

MulticastStatusEntry  
SEQUENCE    
  multicastStatusIndex INTEGER
  multicastStatusVlanID INTEGER
  multicastStatusPort INTEGER
  multicastStatusGroup IpAddress
  multicastStatusJoinCounter INTEGER
  multicastStatusLeaveCounter INTEGER

IgmpCountEntry  
SEQUENCE    
  igmpCountIndex INTEGER
  igmpCountInQuery INTEGER
  igmpCountInReport INTEGER
  igmpCountInLeave INTEGER
  igmpCountInQueryDrop INTEGER
  igmpCountInReportDrop INTEGER
  igmpCountInLeaveDrop INTEGER
  igmpCountOutQuery INTEGER
  igmpCountOutReport INTEGER
  igmpCountOutLeave INTEGER

MulticastVlanStatusEntry  
SEQUENCE    
  multicastVlanStatusVlanID INTEGER
  multicastVlanStatusType INTEGER
  multicastVlanQueryPort PortList
  multicastVlanQuerySrcIp IpAddress

IgmpCounterPortEntry  
SEQUENCE    
  igmpCounterPortJoin Counter32
  igmpCounterPortLeave Counter32
  igmpCounterPortActiveGroup INTEGER
  igmpCounterPortQuery Counter32

IgmpCounterVlanEntry  
SEQUENCE    
  igmpCounterVlanJoin Counter32
  igmpCounterVlanLeave Counter32
  igmpCounterVlanActiveGroup INTEGER
  igmpCounterVlanQuery Counter32

MulticastCurrentGroupStatusEntry  
SEQUENCE    
  multicastCurrentNumberOfActivePort INTEGER

MulticastClientSrcIpEntry  
SEQUENCE    
  multicastClientSrcIpIndex INTEGER
  multicastClientSrcIpAddress IpAddress

MGMDStatusEntry  
SEQUENCE    
  mgmdStatusIndex INTEGER
  mgmdStatusVlanID INTEGER
  mgmdStatusPort INTEGER
  mgmdStatusGroupAddressType InetAddressType
  mgmdStatusGroupAddress InetAddress
  mgmdStatusGroupFilterMode INTEGER

MGMDCountEntry  
SEQUENCE    
  mgmdCountIndex INTEGER
  mgmdCountInQuery INTEGER
  mgmdCountInReport INTEGER
  mgmdCountInLeave INTEGER
  mgmdCountInQueryDrop INTEGER
  mgmdCountInReportDrop INTEGER
  mgmdCountInLeaveDrop INTEGER
  mgmdCountOutQuery INTEGER
  mgmdCountOutReport INTEGER
  mgmdCountOutLeave INTEGER

MGMDVlanStatusEntry  
SEQUENCE    
  mgmdVlanStatusVlanID INTEGER
  mgmdVlanStatusType INTEGER
  mgmdVlanQueryPort PortList
  mgmdVlanQuerySrcIpType InetAddressType
  mgmdVlanQuerySrcIp InetAddress

MGMDCounterPortEntry  
SEQUENCE    
  mgmdCounterPortReport Counter32
  mgmdCounterPortLeave Counter32
  mgmdCounterPortActiveGroup INTEGER
  mgmdCounterPortQuery Counter32
  mgmdCounterPortReportDrop Counter32
  mgmdCounterPortQueryDrop Counter32

MGMDCounterVlanEntry  
SEQUENCE    
  mgmdCounterVlanReport Counter32
  mgmdCounterVlanLeave Counter32
  mgmdCounterVlanActiveGroup INTEGER
  mgmdCounterVlanQuery Counter32
  mgmdCounterVlanReportDrop Counter32
  mgmdCounterVlanQueryDrop Counter32

MGMDCurrentGroupStatusEntry  
SEQUENCE    
  mgmdCurrentNumberOfActivePort INTEGER

MGMDClientSrcIpEntry  
SEQUENCE    
  mgmdClientSrcIpIndex INTEGER
  mgmdClientSrcIpAddressType InetAddressType
  mgmdClientSrcIpAddress InetAddress

MGMDSrcListEntry  
SEQUENCE    
  mgmdSrcListAddressType InetAddressType
  mgmdSrcListAddress InetAddress

IgmpFilteringProfileEntry  
SEQUENCE    
  igmpFilteringProfileName DisplayString
  igmpFilteringProfileStartAddress IpAddress
  igmpFilteringProfileEndAddress IpAddress
  igmpFilteringProfileRowStatus RowStatus

MgmdFilterProfileEntry  
SEQUENCE    
  mgmdFilterProfileName DisplayString
  mgmdFilterProfileAddressType InetAddressType
  mgmdFilterProfileStartAddress InetAddress
  mgmdFilterProfileEndAddress InetAddress
  mgmdFilterProfileRowStatus RowStatus

MvrEntry  
SEQUENCE    
  mvrVlanID INTEGER
  mvrName DisplayString
  mvrMode INTEGER
  mvrRowStatus RowStatus
  mvr8021pPriority INTEGER

MvrPortEntry  
SEQUENCE    
  mvrPortRole INTEGER
  mvrPortTagging EnabledStatus

MvrGroupEntry  
SEQUENCE    
  mvrGroupName DisplayString
  mvrGroupStartAddress IpAddress
  mvrGroupEndAddress IpAddress
  mvrGroupRowStatus RowStatus

MvrMgmdGroupEntry  
SEQUENCE    
  mvrMgmdGroupName DisplayString
  mvrMgmdGroupAddressType InetAddressType
  mvrMgmdGroupStartAddress InetAddress
  mvrMgmdGroupEndAddress InetAddress
  mvrMgmdGroupRowStatus RowStatus

SysLogTypeEntry  
SEQUENCE    
  sysLogTypeIndex INTEGER
  sysLogTypeName DisplayString
  sysLogTypeState EnabledStatus
  sysLogTypeFacility INTEGER

SysLogServerEntry  
SEQUENCE    
  sysLogServerAddress IpAddress
  sysLogServerLogLevel INTEGER
  sysLogServerRowStatus RowStatus

SysLogServerInfoEntry  
SEQUENCE    
  sysLogServerInfoIpAddrType InetAddressType
  sysLogServerInfoIpAddr InetAddress
  sysLogServerInfoLogLevel INTEGER
  sysLogServerInfoRowStatus RowStatus

DiffservMapEntry  
SEQUENCE    
  diffservMapDscp INTEGER
  diffservMapPriority INTEGER

DiffservPortEntry  
SEQUENCE    
  diffservPortState EnabledStatus

Layer2Entry  
SEQUENCE    
  vturIgmpSnoopingStateSetup INTEGER

PortEntry  
SEQUENCE    
  portNumber INTEGER
  portAdminStatus INTEGER
  portOperStatus INTEGER
  portSpeedDuplex INTEGER
  portOperSpeed INTEGER

VturWanEntry  
SEQUENCE    
  vturWanIndex INTEGER
  vturVlanTagging INTEGER
  vturVlanID INTEGER
  vtur8021p INTEGER
  vturPPPUsername OCTET STRING
  vturPPPPassword OCTET STRING
  vturWanProtocol INTEGER
  vturWanProtocolSetting BITS
  vturWanIP IpAddress
  vturWanSubnetMask IpAddress
  vturWanService EnabledStatus
  vturWanRowStatus RowStatus
  vturWanDefaultGateway EnabledStatus

VturWanCommonEntry  
SEQUENCE    
  vturWanQoS EnabledStatus
  vturEnableAutoDefaultGateway EnabledStatus
  vturDefaultGatewayIP IpAddress
  vturVitualPortEnable EnabledStatus

VturClassificationEntry  
SEQUENCE    
  vturClassificationIndex INTEGER
  vturClassificationRuleEnable EnabledStatus
  vturWanInterface INTEGER
  vturClassificationQueue INTEGER
  vturClassification8021p INTEGER
  vturClassificationVid INTEGER
  vturFilterPhysicalPort INTEGER
  vturFilterProtocol INTEGER
  vturFilterSourceIP IpAddress
  vturFilterSourceSubnetMask IpAddress
  vturFilterDestinationIP IpAddress
  vturFilterDestinationSubnetMask IpAddress
  vturFilterSourcePortStart INTEGER
  vturFilterSourcePortEnd INTEGER
  vturFilterDestinationPortStart INTEGER
  vturFilterDestinationPortEnd INTEGER
  vturFilterSourceMACAddr OCTET STRING
  vturFilterSourceMACMask OCTET STRING
  vturFilterDestinationMACAddr OCTET STRING
  vturFilterDestinationMACMask OCTET STRING
  vturFilter8021p INTEGER
  vturFilterProtocolType INTEGER
  vturPolicyGatewayIP IpAddress
  vturClassificationRowStatus RowStatus
  vturClassificationBandwidth INTEGER

VturMntEntry  
SEQUENCE    
  mntOperation INTEGER
  mntCommit INTEGER
  mntStatus INTEGER
  mntRefetchCPEInfo INTEGER

VturAPGeneralStatisticsEntry  
SEQUENCE    
  lanRxBytes Counter32
  lanRxPkts Counter32
  lanTxBytes Counter32
  lanTxPkts Counter32
  vdslRxBytes Counter32
  vdslRxPkts Counter32
  vdslTxBytes Counter32
  vdslTxPkts Counter32
  wlanRxBytes Counter32
  wlanRxPkts Counter32
  wlanRxErrs Counter32
  wlanRxDrops Counter32
  wlanTxBytes Counter32
  wlanTxPkts Counter32
  wlanTxErrs Counter32
  wlanTxDrops Counter32

VturAPWlanBasicEntry  
SEQUENCE    
  enable INTEGER
  ssid DisplayString
  bssid MacAddress
  hidden INTEGER
  channel INTEGER
  mode INTEGER
  txPower INTEGER
  multicastRate INTEGER

VturAPWlanSecurityEntry  
SEQUENCE    
  securityMode INTEGER
  wepEncryp INTEGER
  keyId INTEGER
  key1 DisplayString
  key2 DisplayString
  key3 DisplayString
  key4 DisplayString
  psk DisplayString
  wpaMix INTEGER
  reAuthTime INTEGER
  idleTime INTEGER
  gtkTime INTEGER

VturAPWlanRadiusEntry  
SEQUENCE    
  authServIP InetAddress
  authServPort INTEGER
  authServSecret DisplayString
  accServActive INTEGER
  accServIP InetAddress
  accServPort INTEGER
  accServSecret DisplayString

VturAPWlanMacFilterEntry  
SEQUENCE    
  macFltActive INTEGER
  macFltAction INTEGER

VturAPWlanMacFltAddrEntry  
SEQUENCE    
  fltStaIndex INTEGER
  macFltAddr MacAddress

VturAPWlanStatisticsEntry  
SEQUENCE    
  inPkts INTEGER
  inOctets INTEGER
  inUCasts INTEGER
  inMCasts INTEGER
  rxFCSErrors INTEGER
  outPkts INTEGER
  outOctets INTEGER
  outUCasts INTEGER
  outMCasts INTEGER

VturAPWlanStaListEntry  
SEQUENCE    
  staIndex INTEGER
  staMacAddr MacAddress

VturConsoleEntry  
SEQUENCE    
  vturConsoleSet INTEGER
  vturConsoleAdminPassword OCTET STRING
  vturConsoleUserPassword OCTET STRING

RemoteFunctionEntry  
SEQUENCE    
  telnet INTEGER
  tftp INTEGER
  web INTEGER
  snmp INTEGER
  ssh INTEGER
  wireless INTEGER

VturMacTableEntry  
SEQUENCE    
  vturMacIndex INTEGER
  vturMacAddr MacAddress

VturLanEntry  
SEQUENCE    
  vturLanIP IpAddress
  vturLanSubnetmask IpAddress
  vturDHCPOption INTEGER
  vturDHCPServerStartIPAddr IpAddress
  vturDHCPServerEndIPAddr IpAddress
  vturDHCPServerSubnetmask IpAddress
  vturDHCPServerIPAddr IpAddress

VturCFMEntry  
SEQUENCE    
  vturCFMCommit INTEGER
  vturCFMMdName OCTET STRING
  vturCFMMaName OCTET STRING
  vturCFMVid INTEGER
  vturCFMMepId Dot1agCfmMepId
  vturCFMMdLevel INTEGER
  vturCFMAction INTEGER
  vturCFMDestMAC OCTET STRING
  vturCFMLBMCount INTEGER
  vturCFMResultSentLBM INTEGER
  vturCFMResultInorderLBM INTEGER
  vturCFMResultOutorderLBM INTEGER
  vturMACAddr OCTET STRING
  vturCFMReadStatus INTEGER

VturInfoEntry  
SEQUENCE    
  vturName DisplayString
  vturSysVersion DisplayString
  vturModemCodeVersion DisplayString

ProtoBasedVlanEntry  
SEQUENCE    
  protoBasedVlanPort INTEGER
  protoBasedVlanPacketType INTEGER
  protoBasedVlanEtherType INTEGER
  protoBasedVlanName DisplayString
  protoBasedVlanVid INTEGER
  protoBasedVlanPriority INTEGER
  protoBasedVlanState RowStatus

ClassifierRuleEntry  
SEQUENCE    
  classifierName DisplayString
  classifierEnable INTEGER
  classifierPacketFormat INTEGER
  classifierVlanId INTEGER
  classifier8021pPriority INTEGER
  classifierEtherType INTEGER
  classifierSrcMAC MacAddress
  classifierIncomingPort INTEGER
  classifierDstMAC MacAddress
  classifierDSCP INTEGER
  classifierIpProtocol INTEGER
  classifierEstablishOnly INTEGER
  classifierSrcIp IpAddress
  classifierSrcIpMask INTEGER
  classifierSrcSocket INTEGER
  classifierDstIp IpAddress
  classifierDstIpMask INTEGER
  classifierDstSocket INTEGER
  classifierRowstatus RowStatus
  classifierSrcIpv6 Ipv6Address
  classifierSrcIpv6Mask INTEGER
  classifierDstIpv6 Ipv6Address
  classifierDstIpv6Mask INTEGER

PolicyEntry  
SEQUENCE    
  policyName DisplayString
  policyEnable INTEGER
  policyClassifier DisplayString
  policyVlanId INTEGER
  policyEgressPort INTEGER
  policyOutPktFormat INTEGER
  policy8021pPriority INTEGER
  policyDSCP INTEGER
  policyTOS INTEGER
  policyBandwidth INTEGER
  policyOutOfProfileDSCP INTEGER
  policyForwardingAction INTEGER
  policyPriorityAction INTEGER
  policyDiffServAction INTEGER
  policyOutgoingAction BITS
  policyMeteringEnable INTEGER
  policyOutOfProfileAction BITS
  policyRowstatus RowStatus

VlanCounterEntry  
SEQUENCE    
  vlanCounterTxPkts Counter32
  vlanCounterRxPkts Counter32

SwitchCounterEntry  
SEQUENCE    
  switchUnknownUnicastCounter Counter32
  switchtxratelimitdropcounter Counter32
  switchrxratelimitdropcounter Counter64
  switchrxmeterdropcounter Counter64

VlanCounterResetEntry  
SEQUENCE    
  vlanCounterReset INTEGER

RateLimitProfilePortEntry  
SEQUENCE    
  rateLimitPortProfile DisplayString

PerQueueProfilePortEntry  
SEQUENCE    
  perQueuePortProfile DisplayString

RateLimitProfileEntry  
SEQUENCE    
  rateLimitProfileName DisplayString
  rateLimitProfilePeakRate INTEGER
  rateLimitProfileEgrRate INTEGER
  rateLimitProfileCommitRate INTEGER
  rateLimitProfilePeakState EnabledStatus
  rateLimitProfileEgrState EnabledStatus
  rateLimitProfileCommitState EnabledStatus
  rateLimitProfileRowStatus RowStatus

PerQueueProfileEntry  
SEQUENCE    
  perQueueProfileName DisplayString
  perQueueProfileQ0CIR INTEGER
  perQueueProfileQ0PIR INTEGER
  perQueueProfileQ1CIR INTEGER
  perQueueProfileQ1PIR INTEGER
  perQueueProfileQ2CIR INTEGER
  perQueueProfileQ2PIR INTEGER
  perQueueProfileQ3CIR INTEGER
  perQueueProfileQ3PIR INTEGER
  perQueueProfileQ4CIR INTEGER
  perQueueProfileQ4PIR INTEGER
  perQueueProfileQ5CIR INTEGER
  perQueueProfileQ5PIR INTEGER
  perQueueProfileQ6CIR INTEGER
  perQueueProfileQ6PIR INTEGER
  perQueueProfileQ7CIR INTEGER
  perQueueProfileQ7PIR INTEGER
  perQueueProfileRowStatus RowStatus

VlanSecurityEntry  
SEQUENCE    
  vlanSecurityCount INTEGER

CfmLoopbackPortEntry  
SEQUENCE    
  cfmLoopbackPortState EnabledStatus

CfmMIPEntry  
SEQUENCE    
  cfmPort INTEGER
  cfmVlanID INTEGER
  cfmLevel INTEGER
  cfmMIPRowStatus RowStatus

MrstpBridgeEntry  
SEQUENCE    
  mrstpBridgeIndex INTEGER
  mrstpState INTEGER
  mrstpProtocolSpecification INTEGER
  mrstpPriority INTEGER
  mrstpTimeSinceTopologyChange TimeTicks
  mrstpTopChanges Counter32
  mrstpDesignatedRoot BridgeId
  mrstpRootCost INTEGER
  mrstpRootPort INTEGER
  mrstpMaxAge Timeout
  mrstpHelloTime Timeout
  mrstpHoldTime INTEGER
  mrstpForwardDelay Timeout
  mrstpBridgeMaxAge Timeout
  mrstpBridgeHelloTime Timeout
  mrstpBridgeForwardDelay Timeout

MrstpPortEntry  
SEQUENCE    
  mrstpPort INTEGER
  mrstpPortPriority INTEGER
  mrstpPortState INTEGER
  mrstpPortEnable INTEGER
  mrstpPortPathCost INTEGER
  mrstpPortDesignatedRoot BridgeId
  mrstpPortDesignatedCost INTEGER
  mrstpPortDesignatedBridge BridgeId
  mrstpPortDesignatedPort OCTET STRING
  mrstpPortForwardTransitions Counter32
  mrstpPortOnBridgeIndex INTEGER

DhcpSnpVlanEntry  
SEQUENCE    
  dhcpSnpVlanEntryVid INTEGER
  dhcpSnpVlanEntryEnable EnabledStatus
  dhcpSnpVlanEntryOption82Enable EnabledStatus
  dhcpSnpVlanEntryInfo EnabledStatus
  dhcpSnpVlanEntryRemoteID EnabledStatus

DhcpSnpPortEntry  
SEQUENCE    
  dhcpSnpPortEntryPort INTEGER
  dhcpSnpPortEntryTrust EnabledStatus
  dhcpSnpPortEntryRate INTEGER

DhcpSnpBindEntry  
SEQUENCE    
  dhcpSnpBindEntryMac MacAddress
  dhcpSnpBindEntryVid INTEGER
  dhcpSnpBindEntryIP IpAddress
  dhcpSnpBindEntryLease INTEGER
  dhcpSnpBindEntryType INTEGER
  dhcpSnpBindEntryPort INTEGER

IpsgEntry  
SEQUENCE    
  ipsgEntryMac MacAddress
  ipsgEntryVid INTEGER
  ipsgEntryIp IpAddress
  ipsgEntryLease INTEGER
  ipsgEntryType INTEGER
  ipsgEntryPort INTEGER
  ipsgEntryState RowStatus

ArpInspectVlanEntry  
SEQUENCE    
  arpInspectVlanVid INTEGER
  arpInspectVlanLog INTEGER
  arpInspectVlanStatus INTEGER

ArpInspectPortEntry  
SEQUENCE    
  arpInspectPortIndex INTEGER
  arpInspectPortTrust INTEGER
  arpInspectPortRate INTEGER
  arpInspectPortInterval INTEGER

ArpInspectFilterEntry  
SEQUENCE    
  arpInspectFilterMac MacAddress
  arpInspectFilterVid INTEGER
  arpInspectFilterPort INTEGER
  arpInspectFilterExpiry INTEGER
  arpInspectFilterReason INTEGER
  arpInspectFilterRowStatus RowStatus

ArpInspectLogEntry  
SEQUENCE    
  arpInspectLogMac MacAddress
  arpInspectLogVid INTEGER
  arpInspectLogPort INTEGER
  arpInspectLogIp IpAddress
  arpInspectLogNumPkt INTEGER
  arpInspectLogReason INTEGER
  arpInspectLogTime DateAndTime

ArpInspectStatisticsEntry  
SEQUENCE    
  arpInspectStatisticsVid INTEGER
  arpInspectStatisticsReceived Counter32
  arpInspectStatisticsRequest Counter32
  arpInspectStatisticsReply Counter32
  arpInspectStatisticsForward Counter32
  arpInspectStatisticsDrop Counter32
  arpInspectStatisticsClear EnabledStatus

TrTCMPortEntry  
SEQUENCE    
  trTCMPortState EnabledStatus
  trTCMPortCIR INTEGER
  trTCMPortPIR INTEGER
  trTCMPortDscpGreen INTEGER
  trTCMPortDscpYellow INTEGER
  trTCMPortDscpRed INTEGER

LoopGuardPortEntry  
SEQUENCE    
  loopGuardPortState EnabledStatus
  loopGuardPortMode INTEGER
  loopGuardPortRecoverTime INTEGER

LoopGuardStatusEntry  
SEQUENCE    
  loopGuardStatusTxPkts Counter32
  loopGuardStatusRxPkts Counter32
  loopGuardStatusBadPkts Counter32
  loopGuardStatusShutdownTime DisplayString

SubnetBasedVlanEntry  
SEQUENCE    
  subnetBasedVlanSrcIp IpAddress
  subnetBasedVlanSrcMaskBit INTEGER
  subnetBasedVlanName DisplayString
  subnetBasedVlanVid INTEGER
  subnetBasedVlanPriority INTEGER
  subnetBasedVlanEntryState RowStatus

SubnetBasedVlanInfoEntry  
SEQUENCE    
  subnetBasedVlanInfoSrcIpType InetAddressType
  subnetBasedVlanInfoSrcIp InetAddress
  subnetBasedVlanInfoSrcMaskBit INTEGER
  subnetBasedVlanInfoName DisplayString
  subnetBasedVlanInfoVid INTEGER
  subnetBasedVlanInfoPriority INTEGER
  subnetBasedVlanInfoEntryState RowStatus

MacAuthenticationPortEntry  
SEQUENCE    
  macAuthenticationPortState EnabledStatus

MstiOrCistInstanceIndex  
This textual convention is an extension of the MstiInstanceIndex convention. This extension permits the additional value of zero, which means Common and Internal Spanning Tree (CIST).
TEXTUAL-CONVENTION    
  Integer32 0..16  

MstMapEntry  
SEQUENCE    
  mstMapIndex MstiOrCistInstanceIndex
  mstMapVlans1k OCTET STRING
  mstMapVlans2k OCTET STRING
  mstMapVlans3k OCTET STRING
  mstMapVlans4k OCTET STRING
  mstMapRowStatus RowStatus

MstVlanEntry  
SEQUENCE    
  mstVlanIndex INTEGER
  mstVlanMstIndex MstiOrCistInstanceIndex

MstpPortEntry  
SEQUENCE    
  mstpPortIndex INTEGER
  mstpPortOperEdgePort TruthValue
  mstpPortOperPointToPointMAC TruthValue

MstpXstEntry  
SEQUENCE    
  mstpXstId MstiOrCistInstanceIndex
  mstpXstBridgePriority Integer32
  mstpXstBridgeId BridgeId
  mstpXstInternalRootCost Integer32
  mstpXstRootPort INTEGER
  mstpXstTimeSinceTopologyChange TimeTicks
  mstpXstTopologyChangesCount Counter32

MstpXstPortEntry  
SEQUENCE    
  mstpXstPortXstId MstiOrCistInstanceIndex
  mstpXstPortIndex INTEGER
  mstpXstPortEnable EnabledStatus
  mstpXstPortPriority Integer32
  mstpXstPortPathCost INTEGER
  mstpXstPortState INTEGER
  mstpXstPortDesignatedRoot BridgeId
  mstpXstPortDesignatedCost Integer32
  mstpXstPortDesignatedBridge BridgeId
  mstpXstPortDesignatedPort INTEGER

RadiusAuthServerEntry  
SEQUENCE    
  radiusAuthServerIndex INTEGER
  radiusAuthServerIpAddr IpAddress
  radiusAuthServerUdpPort INTEGER
  radiusAuthServerSharedSecret DisplayString
  radiusAuthServerIpAddressType InetAddressType
  radiusAuthServerIpAddress InetAddress

RadiusAcctServerEntry  
SEQUENCE    
  radiusAcctServerIndex INTEGER
  radiusAcctServerIpAddr IpAddress
  radiusAcctServerUdpPort INTEGER
  radiusAcctServerSharedSecret DisplayString
  radiusAcctServerIpAddressType InetAddressType
  radiusAcctServerIpAddress InetAddress

TacacsAuthServerEntry  
SEQUENCE    
  tacacsAuthServerIndex INTEGER
  tacacsAuthServerIpAddr IpAddress
  tacacsAuthServerTcpPort INTEGER
  tacacsAuthServerSharedSecret DisplayString
  tacacsAuthServerIpAddressType InetAddressType
  tacacsAuthServerIpAddress InetAddress

TacacsAcctServerEntry  
SEQUENCE    
  tacacsAcctServerIndex INTEGER
  tacacsAcctServerIpAddr IpAddress
  tacacsAcctServerTcpPort INTEGER
  tacacsAcctServerSharedSecret DisplayString
  tacacsAcctServerIpAddressType InetAddressType
  tacacsAcctServerIpAddress InetAddress

AuthenticationTypeEntry  
SEQUENCE    
  authenticationTypeName DisplayString
  authenticationTypeMethodList OCTET STRING

AccountingTypeEntry  
SEQUENCE    
  accountingTypeName DisplayString
  accountingTypeActive EnabledStatus
  accountingTypeBroadcast EnabledStatus
  accountingTypeMode INTEGER
  accountingTypeMethod INTEGER
  accountingTypePrivilege INTEGER

Xdsl2ExtLineEntry  
SEQUENCE    
  xdsl2LineCmndConfSelt Xdsl2LineLdsf

Xdsl2ExtLineBandEntry  
SEQUENCE    
  xdsl2LineBandStatusActAtp Integer32
  xdsl2LineBandStatusActRxPwr Integer32

Xdsl2ExtLineSegmentEntry  
SEQUENCE    
  xdsl2LineSegmentLog OCTET STRING
  xdsl2LineSegmentQln OCTET STRING
  xdsl2LineSegmentSnr OCTET STRING
  xdsl2LineSegmentStatus BITS
  xdsl2LineSegmentLogScGroupSize Unsigned32
  xdsl2LineSegmentQlnScGroupSize Unsigned32
  xdsl2LineSegmentSnrScGroupSize Unsigned32

Xdsl2StatusActualRaMode  
fixedRateMode(1) - Fixed rate mode raInit(2) - Adaptive rate mode at initialization dynamicRa(3) - Dynamic rate adaptation sosEnabled(4) - SOS enabled
TEXTUAL-CONVENTION    
  INTEGER none(0), fixedRateMode(1), raInit(2), dynamicRa(3), sosEnabled(4)  

Xdsl2StatusRtxMode  
rtxInUse(1) - RTX in use. rtxForbidden(2) - RTX not in use because RTX-MODE = FORBIDDEN. rtxNotSupportedXtuC(3) - RTX not in use because it is not supported by the XTU-C. rtxNotSupportedXtuR(4) - RTX not in use because it is not supported by the XTU-R. rtxNotSupportedBoth(5) - RTX not in use because it is not supported by the XTU-C and XTU-R.
TEXTUAL-CONVENTION    
  INTEGER none(0), rtxInUse(1), rtxForbidden(2), rtxNotSupportedXtuC(3), rtxNotSupportedXtuR(4), rtxNotSupportedBoth(5)  

Xdsl2ExtChannelStatusEntry  
SEQUENCE    
  xdsl2ChannelStatusActualRaMode Xdsl2StatusActualRaMode
  xdsl2ChannelStatusRetransmissionMode Xdsl2StatusRtxMode
  xdsl2ChannelStatusRetransmissionOverhead Unsigned32
  xdsl2ChannelStatusGinpFramingType Unsigned32
  xdsl2ChannelStatusActualInpAgainstREIN Unsigned32
  xdsl2ChannelStatusReedSolomonCodeWordPerDtu Unsigned32

Xdsl2ExtSCStatusEntry  
SEQUENCE    
  xdsl2SCStatusActAtp Integer32

Xdsl2ExtSCStatusBandEntry  
SEQUENCE    
  xdsl2SCStatusBandSnrMargin Integer32

Xdsl2ExtSeltStatusEntry  
SEQUENCE    
  xdsl2SeltStatus Integer32
  xdsl2SeltStatusLineType DisplayString
  xdsl2SeltStatusLineLength Integer32

Xdsl2ExtSeltReflectionStatusEntry  
SEQUENCE    
  xdsl2SeltReflection Unsigned32
  xdsl2SeltDelay Integer32
  xdsl2SeltError Integer32
  xdsl2SeltAtn180kHz Integer32
  xdsl2SeltAtn300kHz Integer32
  xdsl2SeltFitError Integer32
  xdsl2SeltFitTermination Integer32

Xdsl2ExtPMLineCurrEntry  
SEQUENCE    
  xdsl2PMLSinceLinkFecs Counter32
  xdsl2PMLSinceLinkEs Counter32
  xdsl2PMLSinceLinkSes Counter32
  xdsl2PMLSinceLinkLoss Counter32
  xdsl2PMLSinceLinkUas Counter32
  xdsl2PMLSinceLinkLofs Counter32
  xdsl2PMLSinceLinkLol Counter32
  xdsl2PMLSinceLinkLols Counter32
  xdsl2PMLSinceLinkLpr Counter32
  xdsl2PMLSinceLinkLprs Counter32
  xdsl2PMLCurr15MLofs Counter32
  xdsl2PMLCurr15MLol Counter32
  xdsl2PMLCurr15MLols Counter32
  xdsl2PMLCurr15MLpr Counter32
  xdsl2PMLCurr15MLprs Counter32
  xdsl2PMLCurr1DayLofs Counter32
  xdsl2PMLCurr1DayLol Counter32
  xdsl2PMLCurr1DayLols Counter32
  xdsl2PMLCurr1DayLpr Counter32
  xdsl2PMLCurr1DayLprs Counter32
  xdsl2PMLSinceLinkInmEqInp Counter32
  xdsl2PMLSinceLinkInmIAT Counter32
  xdsl2PMLSinceLinkInmME Counter32
  xdsl2PMLCurr15MInmEqInp Counter32
  xdsl2PMLCurr15MInmIAT Counter32
  xdsl2PMLCurr15MInmME Counter32
  xdsl2PMLCurr1DayInmEqInp Counter32
  xdsl2PMLCurr1DayInmIAT Counter32
  xdsl2PMLCurr1DayInmME Counter32

Xdsl2ExtPMLineHist15MinEntry  
SEQUENCE    
  xdsl2PMLHist15MLofs Counter32
  xdsl2PMLHist15MLol Counter32
  xdsl2PMLHist15MLols Counter32
  xdsl2PMLHist15MLpr Counter32
  xdsl2PMLHist15MLprs Counter32
  xdsl2PMLHist15MInmEqInp Counter32
  xdsl2PMLHist15MInmIAT Counter32
  xdsl2PMLHist15MInmME Counter32

Xdsl2ExtPMLineHist1DayEntry  
SEQUENCE    
  xdsl2PMLHist1DLofs Counter32
  xdsl2PMLHist1DLol Counter32
  xdsl2PMLHist1DLols Counter32
  xdsl2PMLHist1DLpr Counter32
  xdsl2PMLHist1DLprs Counter32
  xdsl2PMLHist1DInmEqInp Counter32
  xdsl2PMLHist1DInmIAT Counter32
  xdsl2PMLHist1DInmME Counter32

Xdsl2ExtPMChCurrEntry  
SEQUENCE    
  xdsl2PMChSinceLinkUncorrectedCWs Unsigned32
  xdsl2PMChCurr15MUncorrectedCWs Unsigned32
  xdsl2PMChCurr1DayUncorrectedCWs Unsigned32
  xdsl2PMChSinceLinkCodingViolations Unsigned32
  xdsl2PMChSinceLinkCorrectedBlocks Unsigned32
  xdsl2PMChSinceLinkRtx Unsigned32
  xdsl2PMChCurr15MRtx Unsigned32
  xdsl2PMChCurr1DayRtx Unsigned32
  xdsl2PMChSinceLinkRtxCorrected Unsigned32
  xdsl2PMChCurr15MRtxCorrected Unsigned32
  xdsl2PMChCurr1DayRtxCorrected Unsigned32
  xdsl2PMChSinceLinkRtxUncorrected Unsigned32
  xdsl2PMChCurr15MRtxUncorrected Unsigned32
  xdsl2PMChCurr1DayRtxUncorrected Unsigned32
  xdsl2PMChSinceLinkLEFTRs Unsigned32
  xdsl2PMChCurr15MLEFTRs Unsigned32
  xdsl2PMChCurr1DayLEFTRs Unsigned32
  xdsl2PMChSinceLinkMinEFTR Unsigned32
  xdsl2PMChCurr15MMinEFTR Unsigned32
  xdsl2PMChCurr1DayMinEFTR Unsigned32
  xdsl2PMChSinceLinkErrFreeBits Unsigned32
  xdsl2PMChCurr15MErrFreeBits Unsigned32
  xdsl2PMChCurr1DayErrFreeBits Unsigned32

Xdsl2ExtPMChHist15MinEntry  
SEQUENCE    
  xdsl2PMChHist15MUncorrectedCWs Unsigned32
  xdsl2PMChHist15MRtx Unsigned32
  xdsl2PMChHist15MRtxCorrected Unsigned32
  xdsl2PMChHist15MRtxUncorrected Unsigned32
  xdsl2PMChHist15MLEFTRs Unsigned32
  xdsl2PMChHist15MMinEFTR Unsigned32
  xdsl2PMChHist15MErrFreeBits Unsigned32

Xdsl2ExtPMChHist1DEntry  
SEQUENCE    
  xdsl2PMChHist1DayUncorrectedCWs Unsigned32
  xdsl2PMChHist1DayRtx Unsigned32
  xdsl2PMChHist1DayRtxCorrected Unsigned32
  xdsl2PMChHist1DayRtxUncorrected Unsigned32
  xdsl2PMChHist1DayLEFTRs Unsigned32
  xdsl2PMChHist1DayMinEFTR Unsigned32
  xdsl2PMChHist1DayErrFreeBits Unsigned32

Xdsl2ExtLineConfTemplateEntry  
SEQUENCE    
  xdsl2LConfTempPortList PortList
  xdsl2LConfTempInmConfProfile SnmpAdminString

Xdsl2ExtLineConfProfEntry  
SEQUENCE    
  xdsl2LConfProfBitSwapDs Unsigned32
  xdsl2LConfProfBitSwapUs Unsigned32
  xdsl2LConfProfPortList PortList
  xdsl2LConfProfSosTimeDs Unsigned32
  xdsl2LConfProfSosTimeUs Unsigned32
  xdsl2LConfProfSosCrcDs Unsigned32
  xdsl2LConfProfSosCrcUs Unsigned32
  xdsl2LConfProfSosNToneDs Unsigned32
  xdsl2LConfProfSosNToneUs Unsigned32
  xdsl2LConfProfSosMaxDs Unsigned32
  xdsl2LConfProfSosMaxUs Unsigned32
  xdsl2LConfProfSosMultiStepDs BITS
  xdsl2LConfProfSosMultiStepUs BITS
  xdsl2LConfProfRocEnableDs Unsigned32
  xdsl2LConfProfRocEnableUs Unsigned32
  xdsl2LConfProfRocSnrmDs Unsigned32
  xdsl2LConfProfRocSnrmUs Unsigned32
  xdsl2LConfProfRocMinInpDs Unsigned32
  xdsl2LConfProfRocMinInpUs Unsigned32
  xdsl2LConfProfDynamicDepthDs Unsigned32
  xdsl2LConfProfDynamicDepthUs Unsigned32

Xdsl2ExtInmConfProfEntry  
SEQUENCE    
  xdsl2ExtInmConfProfProfileName SnmpAdminString
  xdsl2ExtInmConfProfVtucInpEq Unsigned32
  xdsl2ExtInmConfProfVturInpEq Unsigned32
  xdsl2ExtInmConfProfVtucCC Unsigned32
  xdsl2ExtInmConfProfVturCC Unsigned32
  xdsl2ExtInmConfProfVtucIATO Unsigned32
  xdsl2ExtInmConfProfVturIATO Unsigned32
  xdsl2ExtInmConfProfVtucIATS Unsigned32
  xdsl2ExtInmConfProfVturIATS Unsigned32
  xdsl2ExtInmConfProfRowStatus RowStatus
  xdsl2ExtInmConfProfPortList PortList

Xdsl2ConfigRtxMode  
forbidden(0) - Support for G998.4 is disabled. preferred(1) - If G998.4 is supported by the far-end, it is enabled. forced(2) - The line will only train if G998.4 can be enabled. test(3) - G998.4 is enabled in test mode (refer to G998.4, Clause 10.4).
TEXTUAL-CONVENTION    
  INTEGER forbidden(0), preferred(1), forced(2), test(3)  

Xdsl2ExtChConfProfileEntry  
SEQUENCE    
  xdsl2ChConfProfPhyRDs Unsigned32
  xdsl2ChConfProfPhyRUs Unsigned32
  xdsl2ChConfProfPortList OCTET STRING
  xdsl2ChConfProfGinpRtxModeDs Xdsl2ConfigRtxMode
  xdsl2ChConfProfGinpRtxModeUs Xdsl2ConfigRtxMode
  xdsl2ChConfProfGinpEtrMaxDs Unsigned32
  xdsl2ChConfProfGinpEtrMaxUs Unsigned32
  xdsl2ChConfProfGinpEtrMinDs Unsigned32
  xdsl2ChConfProfGinpEtrMinUs Unsigned32
  xdsl2ChConfProfGinpNdrMaxDs Unsigned32
  xdsl2ChConfProfGinpNdrMaxUs Unsigned32
  xdsl2ChConfProfGinpShineRatioDs Unsigned32
  xdsl2ChConfProfGinpShineRatioUs Unsigned32
  xdsl2ChConfProfGinpLeftrThresholdDs Unsigned32
  xdsl2ChConfProfGinpLeftrThresholdUs Unsigned32
  xdsl2ChConfProfGinpMaxDelayDs Unsigned32
  xdsl2ChConfProfGinpMaxDelayUs Unsigned32
  xdsl2ChConfProfGinpMinDelayDs Unsigned32
  xdsl2ChConfProfGinpMinDelayUs Unsigned32
  xdsl2ChConfProfGinpInpMinDs Unsigned32
  xdsl2ChConfProfGinpInpMinUs Unsigned32
  xdsl2ChConfProfGinpReinCfgInpDs Unsigned32
  xdsl2ChConfProfGinpReinCfgInpUs Unsigned32
  xdsl2ChConfProfGinpReinCfgFreqDs Unsigned32
  xdsl2ChConfProfGinpReinCfgFreqUs Unsigned32
  xdsl2ChConfProfSosMinRateB0Ds Unsigned32
  xdsl2ChConfProfSosMinRateB0Us Unsigned32

Xdsl2ExtLineAlarmConfTemplateEntry  
SEQUENCE    
  xdsl2LAlarmConfTempPortList PortList

Xdsl2ExtLineAlarmConfProfileEntry  
SEQUENCE    
  xdsl2LineAlarmConfProfileXtucThresh15MinLofs HCPerfIntervalThreshold
  xdsl2LineAlarmConfProfileXturThresh15MinLofs HCPerfIntervalThreshold
  xdsl2LAlarmConfProfilePortList PortList
  xdsl2LineAlarmConfProfileXturThresh15MinLprs HCPerfIntervalThreshold

Xdsl2ExtChAlarmConfProfileEntry  
SEQUENCE    
  xdsl2ChAlarmConfProfilePortList PortList

MacBasedVlanEntry  
SEQUENCE    
  macBasedVlanName DisplayString
  macBasedVlanMAC MacAddress
  macBasedVlanVlanId INTEGER
  macBasedVlan8021pPriority INTEGER
  macBasedVlanRowstatus RowStatus

VlanProfileEntry  
SEQUENCE    
  vlanProfileName DisplayString
  vlanProfileMacLearning INTEGER
  vlanProfileUnknownMulticastDrop INTEGER
  vlanProfileRowStatus RowStatus

VlanEntry  
SEQUENCE    
  profileName DisplayString

L2ptEntry  
SEQUENCE    
  l2ptProtocolGroup BITS
  l2ptPointToPointProtocolGroup BITS
  l2ptMode INTEGER

VlanMappingPortEntry  
SEQUENCE    
  vlanMappingPortState EnabledStatus
  vlanMappingPortDropMiss EnabledStatus

VlanMappingRuleEntry  
SEQUENCE    
  vlanMappingRuleName DisplayString
  vlanMappingRulePort INTEGER
  vlanMappingRuleVid INTEGER
  vlanMappingRuleTransVid INTEGER
  vlanMappingRulePriority INTEGER
  vlanMappingRuleRowStatus RowStatus
  vlanMappingRuleReplacePrio EnabledStatus

TransceiverSerialInfoEntry  
SEQUENCE    
  transceiverSerialInfoEntryPort INTEGER
  transceiverSerialInfoEntryStatus INTEGER
  transceiverSerialInfoEntryVendor DisplayString
  transceiverSerialInfoEntryPartNo DisplayString
  transceiverSerialInfoEntrySerialNo DisplayString
  transceiverSerialInfoEntryRevision DisplayString
  transceiverSerialInfoEntryDateCode DisplayString
  transceiverSerialInfoEntryTransceiver DisplayString

TransceiverDdmInfoEntry  
SEQUENCE    
  transceiverDdmInfoEntryPort INTEGER
  transceiverDdmInfoEntryType INTEGER
  transceiverDdmInfoEntryAlarmMax DisplayString
  transceiverDdmInfoEntryAlarmMin DisplayString
  transceiverDdmInfoEntryWarnMax DisplayString
  transceiverDdmInfoEntryWarnMin DisplayString
  transceiverDdmInfoEntryCurrent DisplayString
  transceiverDdmInfoEntryDescription DisplayString

Layer2StatusEntry  
SEQUENCE    
  vturIgmpSnoopingStatus INTEGER
  vturUnknownMulticastStatus INTEGER

PortStatusEntry  
SEQUENCE    
  portStatusNumber INTEGER
  portStatusOperStatus INTEGER
  portStatusOperSpeed INTEGER

VturWanStatusEntry  
SEQUENCE    
  vturWanStatusIndex INTEGER
  vturWanStatusVlanTagging INTEGER
  vturWanStatusVlanID INTEGER
  vturWanStatus8021p INTEGER
  vturWanStatusPPPUsername OCTET STRING
  vturWanStatusPPPPassword OCTET STRING
  vturWanStatusProtocol INTEGER
  vturWanStatusProtocolSetting BITS
  vturWanStatusIP IpAddress
  vturWanStatusSubnetMask IpAddress
  vturWanStatusService EnabledStatus

VturWanStatusCommonEntry  
SEQUENCE    
  vturWanStatusCommonQoS EnabledStatus
  vturWanStatusCommonEnableAutoDefaultGateway EnabledStatus
  vturWanStatusCommonDefaultGatewayIP IpAddress
  vturWanStatusCommonVitualPortEnable EnabledStatus

VturClassificationStatusEntry  
SEQUENCE    
  vturClassificationStatusIndex INTEGER
  vturClassificationStatusRuleEnable EnabledStatus
  vturClassificationStatusWanInterface INTEGER
  vturClassificationStatusQueue INTEGER
  vturClassificationStatus8021p INTEGER
  vturClassificationStatusVid INTEGER
  vturClassificationStatusFilterPhysicalPort INTEGER
  vturClassificationStatusFilterProtocol INTEGER
  vturClassificationStatusFilterSourceIP IpAddress
  vturClassificationStatusFilterSourceSubnetMask IpAddress
  vturClassificationStatusFilterDestinationIP IpAddress
  vturClassificationStatusFilterDestinationSubnetMask IpAddress
  vturClassificationStatusFilterSourcePortStart INTEGER
  vturClassificationStatusFilterSourcePortEnd INTEGER
  vturClassificationStatusFilterDestinationPortStart INTEGER
  vturClassificationStatusFilterDestinationPortEnd INTEGER
  vturClassificationStatusFilterSourceMACAddr OCTET STRING
  vturClassificationStatusFilterSourceMACMask OCTET STRING
  vturClassificationStatusFilterDestinationMACAddr OCTET STRING
  vturClassificationStatusFilterDestinationMACMask OCTET STRING
  vturClassificationStatusFilter8021p INTEGER
  vturClassificationStatusFilterProtocolType INTEGER
  vturClassificationStatusPolicyGatewayIP IpAddress

VturAPGeneralStatusEntry  
SEQUENCE    
  vturLanRxBytes Counter32
  vturLanRxPkts Counter32
  vturLanTxBytes Counter32
  vturLanTxPkts Counter32
  vturVdslRxBytes Counter32
  vturVdslRxPkts Counter32
  vturVdslTxBytes Counter32
  vturVdslTxPkts Counter32
  vturWlanRxBytes Counter32
  vturWlanRxPkts Counter32
  vturWlanRxErrs Counter32
  vturWlanRxDrops Counter32
  vturWlanTxBytes Counter32
  vturWlanTxPkts Counter32
  vturWlanTxErrs Counter32
  vturWlanTxDrops Counter32

VturAPPerSSIDStatusEntry  
SEQUENCE    
  vturWlanPerSSIDStatusIndex INTEGER
  vturWlanPerSSIDStatusSSID DisplayString
  vturWlanPerSSIDRxBytes Counter32
  vturWlanPerSSIDRxPkts Counter32
  vturWlanPerSSIDRxErrs Counter32
  vturWlanPerSSIDRxDrops Counter32
  vturWlanPerSSIDTxBytes Counter32
  vturWlanPerSSIDTxPkts Counter32
  vturWlanPerSSIDTxErrs Counter32
  vturWlanPerSSIDTxDrops Counter32

VturAPWlanStatusBasicEntry  
SEQUENCE    
  vturWlanEnable INTEGER
  vturWlanSsid DisplayString
  vturWlanBssid MacAddress
  vturWlanHidden INTEGER
  vturWlanChannel INTEGER
  vturWlanMode INTEGER
  vturWlanTxPower INTEGER
  vturWlanMulticastRate INTEGER

VturAPWlanStatusSecurityEntry  
SEQUENCE    
  vturWlanSecurityMode INTEGER
  vturWlanWepEncryp INTEGER
  vturWlanKeyId INTEGER
  vturWlanKey1 DisplayString
  vturWlanKey2 DisplayString
  vturWlanKey3 DisplayString
  vturWlanKey4 DisplayString
  vturWlanPsk DisplayString
  vturWlanWpaMix INTEGER
  vturWlanReAuthTime INTEGER
  vturWlanIdleTime INTEGER
  vturWlanGtkTime INTEGER

VturAPWlanStatusRadiusEntry  
SEQUENCE    
  vturWlanAuthServIP InetAddress
  vturWlanAuthServPort INTEGER
  vturWlanAuthServSecret DisplayString
  vturWlanAccServActive INTEGER
  vturWlanAccServIP InetAddress
  vturWlanAccServPort INTEGER
  vturWlanAccServSecret DisplayString

VturAPWlanStatusMacFilterEntry  
SEQUENCE    
  vturWlanMacFltActive INTEGER
  vturWlanMacFltAction INTEGER

VturAPWlanStatusMacFltAddrEntry  
SEQUENCE    
  vturWlanFltStaIndex INTEGER
  vturWlanMacFltAddr MacAddress

VturAPWlanStatusStatisticsEntry  
SEQUENCE    
  vturWlanInPkts INTEGER
  vturWlanInOctets INTEGER
  vturWlanInUCasts INTEGER
  vturWlanInMCasts INTEGER
  vturWlanRxFCSErrors INTEGER
  vturWlanOutPkts INTEGER
  vturWlanOutOctets INTEGER
  vturWlanOutUCasts INTEGER
  vturWlanOutMCasts INTEGER

VturAPWlanStatusStaListEntry  
SEQUENCE    
  vturWlanStaIndex INTEGER
  vturWlanStaMacAddr MacAddress

VturConsoleStatusEntry  
SEQUENCE    
  vturConsoleStatusState INTEGER
  vturConsoleStatusAdminPassword OCTET STRING
  vturConsoleStatusUserPassword OCTET STRING

RemoteFunctionStatusEntry  
SEQUENCE    
  telnetStatus INTEGER
  tftpStatus INTEGER
  webStatus INTEGER
  snmpStatus INTEGER
  sshStatus INTEGER
  wirelessStatus INTEGER

VturMacAddrEntry  
SEQUENCE    
  vturMacAddrIndex INTEGER
  vturMacAddress MacAddress

VturLanStatusEntry  
SEQUENCE    
  vturLanStatusIP IpAddress
  vturLanStatusSubnetmask IpAddress
  vturLanStatusDHCPOption INTEGER
  vturLanStatusDHCPServerStartIPAddr IpAddress
  vturLanStatusDHCPServerEndIPAddr IpAddress
  vturLanStatusDHCPServerSubnetmask IpAddress
  vturLanStatusDHCPServerIPAddr IpAddress
  vturLanStatusEthPort INTEGER
  vturLanStatusEthPortIsolate INTEGER

VturCFMStatusEntry  
SEQUENCE    
  vturCFMStatusMdName OCTET STRING
  vturCFMStatusMaName OCTET STRING
  vturCFMStatusVid INTEGER
  vturCFMStatusMepId Dot1agCfmMepId
  vturCFMStatusMdLevel INTEGER
  vturCFMStatusDestMAC OCTET STRING
  vturCFMStatusLBMCount INTEGER
  vturCFMStatusResultSentLBM INTEGER
  vturCFMStatusResultInorderLBM INTEGER
  vturCFMStatusResultOutorderLBM INTEGER
  vturCFMStatusMACAddr OCTET STRING

PPPoEIAEntry  
SEQUENCE    
  pppoeIAVID INTEGER
  pppoeIACircuitIDInfoEnable EnabledStatus
  pppoeIACircuitIDInfoData DisplayString
  pppoeIARemoteIDEnable EnabledStatus
  pppoeIARemoteIDData DisplayString
  pppoeIARowStatus RowStatus
  pppoeIARemoteIDType INTEGER
  pppoeIACircuitIDType INTEGER

MacFlushEntry  
SEQUENCE    
  macFlushPortIndex INTEGER
  macFlushPortConfig INTEGER

SfpThresholdUserInputEntry  
SEQUENCE    
  sfpPortIndex INTEGER
  sfpTempHighAlarmThresh DisplayString
  sfpTempHighWarnThresh DisplayString
  sfpTempLowWarnThresh DisplayString
  sfpTempLowAlarmThresh DisplayString
  sfpVoltageHighAlarmThresh DisplayString
  sfpVoltageHighWarnThresh DisplayString
  sfpVoltageLowWarnThresh DisplayString
  sfpVoltageLowAlarmThresh DisplayString
  sfpTxBiasHighAlarmThresh DisplayString
  sfpTxBiasHighWarnThresh DisplayString
  sfpTxBiasLowWarnThresh DisplayString
  sfpTxBiasLowAlarmThresh DisplayString
  sfpTxPowerHighAlarmThresh DisplayString
  sfpTxPowerHighWarnThresh DisplayString
  sfpTxPowerLowWarnThresh DisplayString
  sfpTxPowerLowAlarmThresh DisplayString
  sfpRxPowerHighAlarmThresh DisplayString
  sfpRxPowerHighWarnThresh DisplayString
  sfpRxPowerLowWarnThresh DisplayString
  sfpRxPowerLowAlarmThresh DisplayString

Defined Values

zyxel 1.3.6.1.4.1.890
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.890.1
OBJECT IDENTIFIER    

accessSwitch 1.3.6.1.4.1.890.1.5
OBJECT IDENTIFIER    

vesSeries 1.3.6.1.4.1.890.1.5.12
OBJECT IDENTIFIER    

ves1724-56 1.3.6.1.4.1.890.1.5.12.46
ZyXEL Private MIB
MODULE-IDENTITY    

sysInfo 1.3.6.1.4.1.890.1.5.12.46.1
OBJECT IDENTIFIER    

sysSwPlatformMajorVers 1.3.6.1.4.1.890.1.5.12.46.1.1
SW platform major version, e.g. 3.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sysSwPlatformMinorVers 1.3.6.1.4.1.890.1.5.12.46.1.2
SW platform minor version, e.g. 50.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sysSwModelString 1.3.6.1.4.1.890.1.5.12.46.1.3
Model letters, e.g. TJ
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysSwVersionControlNbr 1.3.6.1.4.1.890.1.5.12.46.1.4
Version control number, e.g. 0.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sysSwDay 1.3.6.1.4.1.890.1.5.12.46.1.5
SW compilation day, e.g. 19.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sysSwMonth 1.3.6.1.4.1.890.1.5.12.46.1.6
SW compilation month, e.g. 8.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sysSwYear 1.3.6.1.4.1.890.1.5.12.46.1.7
SW compilation year, e.g. 2004.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sysHwMajorVers 1.3.6.1.4.1.890.1.5.12.46.1.8
HW major version number, e.g. 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sysHwMinorVers 1.3.6.1.4.1.890.1.5.12.46.1.9
HW minor version number, e.g. 0.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sysSerialNumber 1.3.6.1.4.1.890.1.5.12.46.1.10
Serial number
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysFirmwareVersion 1.3.6.1.4.1.890.1.5.12.46.1.11
VDSL Switch Firmware Version
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysModemCodeVersion 1.3.6.1.4.1.890.1.5.12.46.1.12
VDSL Modem Code Version
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysPowerInfo 1.3.6.1.4.1.890.1.5.12.46.1.13
CO Power info
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysSwBootUpImage 1.3.6.1.4.1.890.1.5.12.46.1.14
Current system boot up image, You can change the boot up image of next rebooting by setting sysMgmtBootupImage.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER image-1(1), image-2(2)  

sysImage1FwVersion 1.3.6.1.4.1.890.1.5.12.46.1.15
VDSL Switch Image 1 Firmware Version
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysImage2FwVersion 1.3.6.1.4.1.890.1.5.12.46.1.16
VDSL Switch Image 2 Firmware Version
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

brLimitSetup 1.3.6.1.4.1.890.1.5.12.46.3
OBJECT IDENTIFIER    

brLimitState 1.3.6.1.4.1.890.1.5.12.46.3.1
Broadcast/multicast/DLF rate limiting enabled/disabled for the switch.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

brLimitPortTable 1.3.6.1.4.1.890.1.5.12.46.3.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BrLimitPortEntry

brLimitPortEntry 1.3.6.1.4.1.890.1.5.12.46.3.2.1
An entry in brLimitPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  BrLimitPortEntry  

brLimitPortBrState 1.3.6.1.4.1.890.1.5.12.46.3.2.1.1
Broadcast rate limiting enabled/disabled on the port.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

brLimitPortBrRate 1.3.6.1.4.1.890.1.5.12.46.3.2.1.2
Allowed broadcast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

brLimitPortMcState 1.3.6.1.4.1.890.1.5.12.46.3.2.1.3
Multicast rate limiting enabled/disabled on the port.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

brLimitPortMcRate 1.3.6.1.4.1.890.1.5.12.46.3.2.1.4
AAllowed mullticast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

brLimitPortDlfState 1.3.6.1.4.1.890.1.5.12.46.3.2.1.5
Destination lookup failure frames rate limiting enabled/disabled on the port.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

brLimitPortDlfRate 1.3.6.1.4.1.890.1.5.12.46.3.2.1.6
Allowed destination lookup failure frames rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

portSecuritySetup 1.3.6.1.4.1.890.1.5.12.46.4
OBJECT IDENTIFIER    

portSecurityState 1.3.6.1.4.1.890.1.5.12.46.4.1
0: disable, 1:enable port security, 2:enable vlan security
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

portSecurityPortTable 1.3.6.1.4.1.890.1.5.12.46.4.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortSecurityPortEntry

portSecurityPortEntry 1.3.6.1.4.1.890.1.5.12.46.4.2.1
An entry in portSecurityPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortSecurityPortEntry  

portSecurityPortState 1.3.6.1.4.1.890.1.5.12.46.4.2.1.1
Port Security enabled/disabled on the port. Active(1) means this port only accept frames from static MAC addresses that are configured for the port, and dynamic MAC address frames up to the number specified by portSecurityPortCount object.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

portSecurityPortLearnState 1.3.6.1.4.1.890.1.5.12.46.4.2.1.2
MAC address learning enabled/disable on the port.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

portSecurityPortCount 1.3.6.1.4.1.890.1.5.12.46.4.2.1.3
Number of (dynamic) MAC addresses that may be learned on the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

portSecurityMacFreeze 1.3.6.1.4.1.890.1.5.12.46.4.3
This entry is used to execute MacFreeze action to port. It's meaningless while reading this entry.
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

vlanTrunkSetup 1.3.6.1.4.1.890.1.5.12.46.5
OBJECT IDENTIFIER    

vlanTrunkPortTable 1.3.6.1.4.1.890.1.5.12.46.5.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanTrunkPortEntry

vlanTrunkPortEntry 1.3.6.1.4.1.890.1.5.12.46.5.1.1
An entry in vlanTrunkPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanTrunkPortEntry  

vlanTrunkPortState 1.3.6.1.4.1.890.1.5.12.46.5.1.1.1
VlanTrunking enabled/disabled on the port. Active(1) to allow frames belonging to unknown VLAN groups to pass through the switch.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

ctlProtTransSetup 1.3.6.1.4.1.890.1.5.12.46.6
OBJECT IDENTIFIER    

ctlProtTransState 1.3.6.1.4.1.890.1.5.12.46.6.1
Bridge control protocol transparency enabled/disabled for the switch
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

ctlProtTransTunnelPortTable 1.3.6.1.4.1.890.1.5.12.46.6.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CtlProtTransTunnelPortEntry

ctlProtTransTunnelPortEntry 1.3.6.1.4.1.890.1.5.12.46.6.2.1
An entry in ctlProtTransTunnelPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CtlProtTransTunnelPortEntry  

ctlProtTransTunnelMode 1.3.6.1.4.1.890.1.5.12.46.6.2.1.1
Bridge control protocol transparency mode for the port. Modes: Peer(0), Tunnel(1), Discard(2), Network(3)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER peer(0), tunnel(1), discard(2), network(3)  

vlanStackSetup 1.3.6.1.4.1.890.1.5.12.46.7
OBJECT IDENTIFIER    

vlanStackState 1.3.6.1.4.1.890.1.5.12.46.7.1
VLAN Stacking enabled/disabled for the switch.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

vlanStackTpid 1.3.6.1.4.1.890.1.5.12.46.7.2
SP TPID in hex format, e.g. 8100.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vlanStackPortTable 1.3.6.1.4.1.890.1.5.12.46.7.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanStackPortEntry

vlanStackPortEntry 1.3.6.1.4.1.890.1.5.12.46.7.3.1
An entry in vlanStackPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanStackPortEntry  

vlanStackPortMode 1.3.6.1.4.1.890.1.5.12.46.7.3.1.1
Mode of the port. Set Normal to have the switch ignore frames received (or transmitted) on this port with VLAN stacking tags. Anything you configure in SPVID and Priority are ignored. Set Access mode to have the switch add the SP TPID tag to all incoming frames received on this port. Set Access mode for ingress ports at the edge of the service provider's network. Set Tunnel mode (available for Gigabit ports only) for egress ports at the edge of the service provider's network. In order to support VLAN stacking on a port, the port must be able to allow frames of 1526 Bytes (1522 Bytes + 4 Bytes for the second tag) to pass through it. normal (1), Access (2), tunnel (3)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal(1), access(2), tunnel(3)  

vlanStackPortVid 1.3.6.1.4.1.890.1.5.12.46.7.3.1.2
VLAN ID used in service provider tag.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vlanStackPortPrio 1.3.6.1.4.1.890.1.5.12.46.7.3.1.3
Priority value for service provider tag. 0 is the lowest priority level and 7 is the highest.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER priority-0(0), priority-1(1), priority-2(2), priority-3(3), priority-4(4), priority-5(5), priority-6(6), priority-7(7)  

vlanStackTunnelPortTpid 1.3.6.1.4.1.890.1.5.12.46.7.3.1.4
Tunnel Port TPID in hex format, e.g. 8100.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vlanStackPCopyCtagPrio 1.3.6.1.4.1.890.1.5.12.46.7.3.1.5
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  EnabledStatus  

selectiveQinQTable 1.3.6.1.4.1.890.1.5.12.46.7.4
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SelectiveQinQEntry

selectiveQinQEntry 1.3.6.1.4.1.890.1.5.12.46.7.4.1
An entry in selective qinq table
Status: current Access: not-accessible
OBJECT-TYPE    
  SelectiveQinQEntry  

selectiveQinQName 1.3.6.1.4.1.890.1.5.12.46.7.4.1.1
The name of selective qinq entry
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

selectiveQinQPort 1.3.6.1.4.1.890.1.5.12.46.7.4.1.2
interface port id
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

selectiveQinQCvid 1.3.6.1.4.1.890.1.5.12.46.7.4.1.3
inner vid
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

selectiveQinQSpvid 1.3.6.1.4.1.890.1.5.12.46.7.4.1.4
outer vid
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

selectiveQinQPriority 1.3.6.1.4.1.890.1.5.12.46.7.4.1.5
priority
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER priority-0(0), priority-1(1), priority-2(2), priority-3(3), priority-4(4), priority-5(5), priority-6(6), priority-7(7)  

selectiveQinQACtivePrio 1.3.6.1.4.1.890.1.5.12.46.7.4.1.7
Use the value for priority for Stag
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

selectiveQinQRowStatus 1.3.6.1.4.1.890.1.5.12.46.7.4.1.6
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

portBasedInnerQTable 1.3.6.1.4.1.890.1.5.12.46.7.5
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortBasedInnerQEntry

portBasedInnerQEntry 1.3.6.1.4.1.890.1.5.12.46.7.5.1
An entry in PortBasedInnerQTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortBasedInnerQEntry  

portBasedInnerQVid 1.3.6.1.4.1.890.1.5.12.46.7.5.1.1
VLAN ID used in inner tag.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

portBasedInnerQPrio 1.3.6.1.4.1.890.1.5.12.46.7.5.1.2
Priority value for inner tag. 0 is the lowest priority level and 7 is the highest.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER priority-0(0), priority-1(1), priority-2(2), priority-3(3), priority-4(4), priority-5(5), priority-6(6), priority-7(7)  

portBasedInnerQActive 1.3.6.1.4.1.890.1.5.12.46.7.5.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

portBasedInnerQTxUntag 1.3.6.1.4.1.890.1.5.12.46.7.5.1.4
Tx without Ctag (Only active when innerQ is enable)
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

dot1xSetup 1.3.6.1.4.1.890.1.5.12.46.8
OBJECT IDENTIFIER    

portAuthState 1.3.6.1.4.1.890.1.5.12.46.8.3
802.1x port authentication enabled/disabled for the switch.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

portAuthTable 1.3.6.1.4.1.890.1.5.12.46.8.4
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortAuthEntry

portAuthEntry 1.3.6.1.4.1.890.1.5.12.46.8.4.1
An entry in portAuthTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortAuthEntry  

portAuthEntryState 1.3.6.1.4.1.890.1.5.12.46.8.4.1.1
802.1x port authentication enabled or disabled on the port.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

portReAuthEntryState 1.3.6.1.4.1.890.1.5.12.46.8.4.1.2
802.1x port re-authentication enabled or disabled on the port.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

portReAuthEntryTimer 1.3.6.1.4.1.890.1.5.12.46.8.4.1.3
Re-authentication timer in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

hwMonitorInfo 1.3.6.1.4.1.890.1.5.12.46.9
OBJECT IDENTIFIER    

fanRpmTable 1.3.6.1.4.1.890.1.5.12.46.9.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FanRpmEntry

fanRpmEntry 1.3.6.1.4.1.890.1.5.12.46.9.1.1
An entry in fanRpmTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  FanRpmEntry  

fanRpmIndex 1.3.6.1.4.1.890.1.5.12.46.9.1.1.1
Index of FAN.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

fanRpmCurValue 1.3.6.1.4.1.890.1.5.12.46.9.1.1.2
Current speed in Revolutions Per Minute (RPM) on the fan.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

fanRpmMaxValue 1.3.6.1.4.1.890.1.5.12.46.9.1.1.3
Maximum speed measured in Revolutions Per Minute (RPM) on the fan.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

fanRpmMinValue 1.3.6.1.4.1.890.1.5.12.46.9.1.1.4
Minimum speed measured in Revolutions Per Minute (RPM) on the fan.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

fanRpmLowThresh 1.3.6.1.4.1.890.1.5.12.46.9.1.1.5
The minimum speed at which a normal fan should work.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

fanRpmDescr 1.3.6.1.4.1.890.1.5.12.46.9.1.1.6
'Normal' indicates that this fan is functioning above the minimum speed. 'Error' indicates that this fan is functioning below the minimum speed.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

tempTable 1.3.6.1.4.1.890.1.5.12.46.9.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TempEntry

tempEntry 1.3.6.1.4.1.890.1.5.12.46.9.2.1
An entry in tempTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  TempEntry  

tempIndex 1.3.6.1.4.1.890.1.5.12.46.9.2.1.1
Index of temperature unit. 1:MAC, 2:CPU, 3:PHY
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER mac(1), cpu(2), phy(3)  

tempCurValue 1.3.6.1.4.1.890.1.5.12.46.9.2.1.2
The current temperature measured at this sensor.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

tempMaxValue 1.3.6.1.4.1.890.1.5.12.46.9.2.1.3
The maximum temperature measured at this sensor.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

tempMinValue 1.3.6.1.4.1.890.1.5.12.46.9.2.1.4
The minimum temperature measured at this sensor.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

tempHighThresh 1.3.6.1.4.1.890.1.5.12.46.9.2.1.5
The upper temperature limit at this sensor.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

tempDescr 1.3.6.1.4.1.890.1.5.12.46.9.2.1.6
'Normal' indicates temperatures below the threshold and 'Error' for those above.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

voltageTable 1.3.6.1.4.1.890.1.5.12.46.9.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VoltageEntry

voltageEntry 1.3.6.1.4.1.890.1.5.12.46.9.3.1
An entry in voltageTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VoltageEntry  

voltageIndex 1.3.6.1.4.1.890.1.5.12.46.9.3.1.1
Index of voltage. (1) 14VIN (2) 2.5VS (3) CPU/DSP/AFE
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER vin14(1), vs2-5(2), cpu-dsp-afe(3)  

voltageCurValue 1.3.6.1.4.1.890.1.5.12.46.9.3.1.2
The current voltage reading.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

voltageMaxValue 1.3.6.1.4.1.890.1.5.12.46.9.3.1.3
The maximum voltage measured at this point.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

voltageMinValue 1.3.6.1.4.1.890.1.5.12.46.9.3.1.4
The minimum voltage measured at this point.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

voltageNominalValue 1.3.6.1.4.1.890.1.5.12.46.9.3.1.5
The normal voltage at wchich the switch work.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

voltageLowThresh 1.3.6.1.4.1.890.1.5.12.46.9.3.1.6
The minimum voltage at which the switch should work.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

voltageDescr 1.3.6.1.4.1.890.1.5.12.46.9.3.1.7
'Normal' indicates that the voltage is within an acceptable operating range at this point; otherwise 'Error' is displayed.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

snmpSetup 1.3.6.1.4.1.890.1.5.12.46.10
OBJECT IDENTIFIER    

snmpGetCommunity 1.3.6.1.4.1.890.1.5.12.46.10.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpSetCommunity 1.3.6.1.4.1.890.1.5.12.46.10.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpTrapCommunity 1.3.6.1.4.1.890.1.5.12.46.10.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpTrapDestTable 1.3.6.1.4.1.890.1.5.12.46.10.4
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnmpTrapDestEntry

snmpTrapDestEntry 1.3.6.1.4.1.890.1.5.12.46.10.4.1
An entry in snmpTrapDestTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpTrapDestEntry  

snmpTrapDestIP 1.3.6.1.4.1.890.1.5.12.46.10.4.1.1
IP address of trap destination.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

snmpTrapDestRowStatus 1.3.6.1.4.1.890.1.5.12.46.10.4.1.2
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

snmpTrapDestPort 1.3.6.1.4.1.890.1.5.12.46.10.4.1.3
The UDP port of the trap destination.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

snmpTrapVersion 1.3.6.1.4.1.890.1.5.12.46.10.4.1.4
The SNMP protocol version to send traps.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER v1(0), v2c(1), v3(2)  

snmpTrapUserName 1.3.6.1.4.1.890.1.5.12.46.10.4.1.5
The user name for sending SNMPv3 traps.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpTrapGroupTable 1.3.6.1.4.1.890.1.5.12.46.10.5
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnmpTrapGroupEntry

snmpTrapGroupEntry 1.3.6.1.4.1.890.1.5.12.46.10.5.1
An entry in snmpTrapGroupTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpTrapGroupEntry  

snmpTrapSystemGroup 1.3.6.1.4.1.890.1.5.12.46.10.5.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  BITS coldStart(0), warmStart(1), fanSpeed(2), temperature(3), voltage(4), reset(5), externalalarm(7), loopguard(9), lpr(10)  

snmpTrapInterfaceGroup 1.3.6.1.4.1.890.1.5.12.46.10.5.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  BITS linkup(0), linkdown(1), autonegotiation(2), sfp(4)  

snmpTrapAAAGroup 1.3.6.1.4.1.890.1.5.12.46.10.5.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  BITS authentication(0), accounting(1)  

snmpTrapSwitchGroup 1.3.6.1.4.1.890.1.5.12.46.10.5.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  BITS stp(0), mactable(1), rmon(2)  

snmpTrapVdslGroup 1.3.6.1.4.1.890.1.5.12.46.10.5.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  BITS alarmprofile(0), others(1)  

snmpVersion 1.3.6.1.4.1.890.1.5.12.46.10.6
The SNMP version to be used. v3v2c means that the manager can get/set by SNMPv3 and can get by SNMPv2c.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER v2c(0), v3(1), v3v2c(2)  

snmpUserTable 1.3.6.1.4.1.890.1.5.12.46.10.7
A table that contains SNMPv3 user information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnmpUserEntry

snmpUserEntry 1.3.6.1.4.1.890.1.5.12.46.10.7.1
An entry of snmpUserTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpUserEntry  

snmpUserName 1.3.6.1.4.1.890.1.5.12.46.10.7.1.1
The user name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

snmpUserSecurityLevel 1.3.6.1.4.1.890.1.5.12.46.10.7.1.2
The level of security at which SNMP messages can be sent or with which operations are being processed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noAuthNoPriv(0), authNoPriv(1), authPriv(2)  

snmpUserAuthProtocol 1.3.6.1.4.1.890.1.5.12.46.10.7.1.3
The type of authentication protocol to be used.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER md5(0), sha(1)  

snmpUserPrivProtocol 1.3.6.1.4.1.890.1.5.12.46.10.7.1.4
The type of privacy protocol to be used.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER des(0), aes(1)  

snmpTrapDestInfoTable 1.3.6.1.4.1.890.1.5.12.46.10.8
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnmpTrapDestInfoEntry

snmpTrapDestInfoEntry 1.3.6.1.4.1.890.1.5.12.46.10.8.1
An entry in snmpTrapDestInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpTrapDestInfoEntry  

snmpTrapDestInfoIpAddrType 1.3.6.1.4.1.890.1.5.12.46.10.8.1.1
IP address of trap destination.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType ipv4(1), ipv6(2)  

snmpTrapDestInfoIpAddr 1.3.6.1.4.1.890.1.5.12.46.10.8.1.2
IP address of trap destination.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

snmpTrapDestInfoRowStatus 1.3.6.1.4.1.890.1.5.12.46.10.8.1.3
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

snmpTrapDestInfoPort 1.3.6.1.4.1.890.1.5.12.46.10.8.1.4
The UDP port of the trap destination.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

snmpTrapDestInfoVersion 1.3.6.1.4.1.890.1.5.12.46.10.8.1.5
The SNMP protocol version to send traps.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER v1(0), v2c(1), v3(2)  

snmpTrapDestInfoUserName 1.3.6.1.4.1.890.1.5.12.46.10.8.1.6
The user name for sending SNMPv3 traps.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpTrapGroupInfoTable 1.3.6.1.4.1.890.1.5.12.46.10.9
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnmpTrapGroupInfoEntry

snmpTrapGroupInfoEntry 1.3.6.1.4.1.890.1.5.12.46.10.9.1
An entry in snmpTrapGroupInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpTrapGroupInfoEntry  

snmpTrapGroupInfoSystemGroup 1.3.6.1.4.1.890.1.5.12.46.10.9.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  BITS coldStart(0), warmStart(1), fanSpeed(2), temperature(3), voltage(4), reset(5), externalalarm(7), loopguard(9), lpr(10)  

snmpTrapGroupInfoInterfaceGroup 1.3.6.1.4.1.890.1.5.12.46.10.9.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  BITS linkup(0), linkdown(1), autonegotiation(2), sfp(4)  

snmpTrapGroupInfoAAAGroup 1.3.6.1.4.1.890.1.5.12.46.10.9.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  BITS authentication(0), accounting(1)  

snmpTrapGroupInfoSwitchGroup 1.3.6.1.4.1.890.1.5.12.46.10.9.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  BITS stp(0), mactable(1), rmon(2)  

snmpTrapGroupInfoVdslGroup 1.3.6.1.4.1.890.1.5.12.46.10.9.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  BITS alarmprofile(0), others(1)  

dateTimeServerSetup 1.3.6.1.4.1.890.1.5.12.46.11
OBJECT IDENTIFIER    

dateTimeServerType 1.3.6.1.4.1.890.1.5.12.46.11.1
The time service protocol.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), daytime(2), time(3), ntp(4)  

dateTimeServerIP 1.3.6.1.4.1.890.1.5.12.46.11.2
IP address of time server, IPv4 only.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dateTimeZone 1.3.6.1.4.1.890.1.5.12.46.11.3
The time difference between UTC. Ex: +01
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

dateTimeNewDateYear 1.3.6.1.4.1.890.1.5.12.46.11.4
The new date in year.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

dateTimeNewDateMonth 1.3.6.1.4.1.890.1.5.12.46.11.5
The new date in month.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

dateTimeNewDateDay 1.3.6.1.4.1.890.1.5.12.46.11.6
The new date in day.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

dateTimeNewTimeHour 1.3.6.1.4.1.890.1.5.12.46.11.7
The new time in hour.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

dateTimeNewTimeMinute 1.3.6.1.4.1.890.1.5.12.46.11.8
The new time in minute.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

dateTimeNewTimeSecond 1.3.6.1.4.1.890.1.5.12.46.11.9
The new time in second.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

dateTimeDaylightSavingTimeSetup 1.3.6.1.4.1.890.1.5.12.46.11.10
OBJECT IDENTIFIER    

daylightSavingTimeState 1.3.6.1.4.1.890.1.5.12.46.11.10.1
Daylight saving time service enabled/disabled for the switch.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

daylightSavingTimeStartDateWeek 1.3.6.1.4.1.890.1.5.12.46.11.10.2
Daylight saving time service start week.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER first(1), second(2), third(3), fourth(4), last(5)  

daylightSavingTimeStartDateDay 1.3.6.1.4.1.890.1.5.12.46.11.10.3
Daylight saving time service start day.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sunday(0), monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6)  

daylightSavingTimeStartDateMonth 1.3.6.1.4.1.890.1.5.12.46.11.10.4
Daylight saving time service start month.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER january(1), february(2), march(3), april(4), may(5), june(6), july(7), august(8), september(9), october(10), november(11), december(12)  

daylightSavingTimeStartDateHour 1.3.6.1.4.1.890.1.5.12.46.11.10.5
Daylight saving time service start time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

daylightSavingTimeEndDateWeek 1.3.6.1.4.1.890.1.5.12.46.11.10.6
Daylight saving time service end week.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER first(1), second(2), third(3), fourth(4), last(5)  

daylightSavingTimeEndDateDay 1.3.6.1.4.1.890.1.5.12.46.11.10.7
Daylight saving time service end day.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER sunday(0), monday(1), tuesday(2), wednesday(3), thursday(4), friday(5), saturday(6)  

daylightSavingTimeEndDateMonth 1.3.6.1.4.1.890.1.5.12.46.11.10.8
Daylight saving time service end month.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER january(1), february(2), march(3), april(4), may(5), june(6), july(7), august(8), september(9), october(10), november(11), december(12)  

daylightSavingTimeEndDateHour 1.3.6.1.4.1.890.1.5.12.46.11.10.9
Daylight saving time service end time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

dateTimeServerIPAddrType 1.3.6.1.4.1.890.1.5.12.46.11.11
The address type of dateTimeServerIPAddr.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType ipv4(1), ipv6(2)  

dateTimeServerIPAddr 1.3.6.1.4.1.890.1.5.12.46.11.12
The IP address of time server.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

sysMgmt 1.3.6.1.4.1.890.1.5.12.46.12
OBJECT IDENTIFIER    

sysMgmtConfigSave 1.3.6.1.4.1.890.1.5.12.46.12.1
If setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file. If not, running-config will be written to the booting one.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER config-1(1), config-2(2)  

sysMgmtBootupConfig 1.3.6.1.4.1.890.1.5.12.46.12.2
The setting value (read index) will be written into non-volatile memory. While rebooting, the variable write index is equal to read index initially. You can change the value of write index by CLI / MIB.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER config-1(1), config-2(2)  

sysMgmtReboot 1.3.6.1.4.1.890.1.5.12.46.12.3
Reboot switch from SNMP. 1:Reboot, 0:Nothing
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER nothing(0), reboot(1)  

sysMgmtDefaultConfig 1.3.6.1.4.1.890.1.5.12.46.12.4
Erase running config and reset to default.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER nothing(0), reset-to-default(1), reset-to-default-keep-ip(2)  

sysMgmtLastActionStatus 1.3.6.1.4.1.890.1.5.12.46.12.5
Display status of last mgmt action.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), success(1), fail(2)  

sysMgmtSystemStatus 1.3.6.1.4.1.890.1.5.12.46.12.6
This variable indicates the status of the system. The sysMgmtAlarmStatus is a bit map represented a sum, therefore, it can represent multiple defects simultaneously. The sysNoDefect should be set if and only if no other flag is set. The various bit positions are: 0 sysAlarmDetected 1 sysTemperatureError 2 sysFanRPMError 3 sysVoltageRangeError 4 sysExternalAlarm
Status: current Access: read-only
OBJECT-TYPE    
  BITS sysAlarmDetected(0), sysTemperatureError(1), sysFanRPMError(2), sysVoltageRangeError(3), sysExternalAlarm(4)  

sysMgmtCPUUsage 1.3.6.1.4.1.890.1.5.12.46.12.7
Show device CPU load in %, it's the snapshot of CPU load when getting the values.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sysMgmtBootupImage 1.3.6.1.4.1.890.1.5.12.46.12.8
The setting value (read index) will be written into non-volatile memory. When rebooting, the selected image will be used. You can change the value of write index by CLI / MIB.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER image-1(1), image-2(2)  

sysMgmtCounterReset 1.3.6.1.4.1.890.1.5.12.46.12.9
Reset all port counters.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sysMgmtTftpServiceSetup 1.3.6.1.4.1.890.1.5.12.46.12.10
OBJECT IDENTIFIER    

sysMgmtTftpServerIp 1.3.6.1.4.1.890.1.5.12.46.12.10.1
IP address of TFTP server
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

sysMgmtTftpRemoteFileName 1.3.6.1.4.1.890.1.5.12.46.12.10.2
The file name that you want to backup to or restore from TFTP server
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysMgmtTftpConfigIndex 1.3.6.1.4.1.890.1.5.12.46.12.10.3
Index of system configuration which you want to restore.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER config1(1), config2(2)  

sysMgmtTftpAction 1.3.6.1.4.1.890.1.5.12.46.12.10.4
Action of tftp service. 1: Backup running-config to tftp server, 2: Restore config from tftp server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), backup-config(1), restore-config(2)  

sysMgmtTftpActionStatus 1.3.6.1.4.1.890.1.5.12.46.12.10.5
Display status of mgmt action.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), success(1), fail(2), under-action(3)  

sysMgmtTftpActionErrorInfo 1.3.6.1.4.1.890.1.5.12.46.12.10.6
Display error information of mgmt action.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysMgmtTftpServerAddressType 1.3.6.1.4.1.890.1.5.12.46.12.10.7
The address type of the sysMgmtTftpServerAddress entry.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType ipv4(1), ipv6(2)  

sysMgmtTftpServerAddress 1.3.6.1.4.1.890.1.5.12.46.12.10.8
IPv4/IPv6 address of TFTP server
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress Size(4|16)  

sysMgmtRmtFwUpgradeSetup 1.3.6.1.4.1.890.1.5.12.46.12.11
OBJECT IDENTIFIER    

sysMgmtRmtFwUpgradeOp 1.3.6.1.4.1.890.1.5.12.46.12.11.1
Specify remote FW upgrade operation
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(1), upgrade(2)  

sysMgmtRmtFwUpgradeTarget 1.3.6.1.4.1.890.1.5.12.46.12.11.2
Specify remote FW upgrade target CPEs
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

sysMgmtRmtFwUpgradeStatus 1.3.6.1.4.1.890.1.5.12.46.12.11.3
OBJECT IDENTIFIER    

rmtFwUpgradeStatusTable 1.3.6.1.4.1.890.1.5.12.46.12.11.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RmtFwUpgradeStatusEntry

rmtFwUpgradeStatusEntry 1.3.6.1.4.1.890.1.5.12.46.12.11.3.1.1
An entry in rmtFwUpgradeStatusTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  RmtFwUpgradeStatusEntry  

rmtFwUpgradeStatus 1.3.6.1.4.1.890.1.5.12.46.12.11.3.1.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), upgrading(2), success(3), fail(4)  

sysMgmtRmtFwScheduleUpgrade 1.3.6.1.4.1.890.1.5.12.46.12.11.4
OBJECT IDENTIFIER    

sysMgmtRmtFwModel 1.3.6.1.4.1.890.1.5.12.46.12.11.4.1
FW model for upgrade periodically
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysMgmtRmtFwVersion 1.3.6.1.4.1.890.1.5.12.46.12.11.4.2
FW version for upgrade periodically
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rmtFwStatusTable 1.3.6.1.4.1.890.1.5.12.46.12.11.4.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RmtFwStatusEntry

rmtFwStatusEntry 1.3.6.1.4.1.890.1.5.12.46.12.11.4.3.1
An entry in rmtFwStatusTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  RmtFwStatusEntry  

rmtFwStatus 1.3.6.1.4.1.890.1.5.12.46.12.11.4.3.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysMgmtPacketBufferUsage 1.3.6.1.4.1.890.1.5.12.46.12.12
Show device packet buffer usage in %, it's the snapshot of packet buffer usage ratio when getting the values.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sysMgmtMemoryUsage 1.3.6.1.4.1.890.1.5.12.46.12.13
Show device memory usage in %, it's the snapshot of the device memory usage ratio when getting the values.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sysLoginSetup 1.3.6.1.4.1.890.1.5.12.46.12.14
OBJECT IDENTIFIER    

loginLimitMaxNumberOfUser 1.3.6.1.4.1.890.1.5.12.46.12.14.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sysLoginSetupTable 1.3.6.1.4.1.890.1.5.12.46.12.14.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysLoginSetupEntry

sysLoginSetupEntry 1.3.6.1.4.1.890.1.5.12.46.12.14.2.1
An entry in LoginLimitMaxNumberOfUser.
Status: current Access: not-accessible
OBJECT-TYPE    
  SysLoginSetupEntry  

sysLoginName 1.3.6.1.4.1.890.1.5.12.46.12.14.2.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysLoginPassword 1.3.6.1.4.1.890.1.5.12.46.12.14.2.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysLoginPrivilege 1.3.6.1.4.1.890.1.5.12.46.12.14.2.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

sysLoginRowStatus 1.3.6.1.4.1.890.1.5.12.46.12.14.2.1.4
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sysMgmtExternalAlarmSetup 1.3.6.1.4.1.890.1.5.12.46.12.15
OBJECT IDENTIFIER    

sysMgmtExternalAlarm1 1.3.6.1.4.1.890.1.5.12.46.12.15.1
externalalarm1 name setting
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysMgmtExternalAlarm2 1.3.6.1.4.1.890.1.5.12.46.12.15.2
externalalarm2 name setting
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysMgmtExternalAlarm3 1.3.6.1.4.1.890.1.5.12.46.12.15.3
externalalarm3 name setting
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysMgmtExternalAlarm4 1.3.6.1.4.1.890.1.5.12.46.12.15.4
externalalarm4 name setting
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sysMgmtExternalAlarmCurrentStatus 1.3.6.1.4.1.890.1.5.12.46.12.15.5
externalalarm current status. The first to fourth bit represent externalalarm1 to 4 current status.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysMgmtMacFlush 1.3.6.1.4.1.890.1.5.12.46.12.16
Set 1 to execute mac flush operation, read value will always return 0
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mac-flush(1)  

sysMgmtCPUUsageThreshold 1.3.6.1.4.1.890.1.5.12.46.12.17
Set CPU Threshold value
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

sysMgmtPacketBufferThreshold 1.3.6.1.4.1.890.1.5.12.46.12.18
Set packet buffer usage Threshold value
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

sysMgmtMemoryUsageThreshold 1.3.6.1.4.1.890.1.5.12.46.12.19
Set memory usage Threshold value
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

layer2Setup 1.3.6.1.4.1.890.1.5.12.46.13
OBJECT IDENTIFIER    

vlanTypeSetup 1.3.6.1.4.1.890.1.5.12.46.13.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dot1Q(1), port-based(2)  

igmpSnoopingStateSetup 1.3.6.1.4.1.890.1.5.12.46.13.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), enable-igmp-snooping(2), enable-igmp-proxying(3)  

tagVlanPortIsolationState 1.3.6.1.4.1.890.1.5.12.46.13.3
This item always returns 0. Set 1(port isolation) or 2 (all-connected) to this item to quickly setup port-based VLAN members.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

stpState 1.3.6.1.4.1.890.1.5.12.46.13.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

igmpFilteringStateSetup 1.3.6.1.4.1.890.1.5.12.46.13.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

unknownMulticastFrameForwarding 1.3.6.1.4.1.890.1.5.12.46.13.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER flooding(1), drop(2)  

multicastGrpHostTimeout 1.3.6.1.4.1.890.1.5.12.46.13.7
Specify host timeout for all multicast groups when the specific port is in auto mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

multicastGrpLeaveTimeout 1.3.6.1.4.1.890.1.5.12.46.13.8
Specify leave timeout for all multicast groups.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

reservedMulticastFrameForwarding 1.3.6.1.4.1.890.1.5.12.46.13.9
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER flooding(1), drop(2)  

igmpsnp8021pPriority 1.3.6.1.4.1.890.1.5.12.46.13.10
Set the 802.1p priority of control messages for igmp-snooping(0~8, 8-No Change)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

portBasedVlanPortIsolationState 1.3.6.1.4.1.890.1.5.12.46.13.11
This item always returns 0. Set 1(port isolation) or 2 (all-connected) to this item to quickly setup port-based VLAN members.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

igmpsnpVlanMode 1.3.6.1.4.1.890.1.5.12.46.13.12
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), fixed(2)  

stpMode 1.3.6.1.4.1.890.1.5.12.46.13.13
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER rstp(1), mrstp(2), mstp(3)  

mgmdMLDsupport 1.3.6.1.4.1.890.1.5.12.46.13.17
Enable MLD / Disable MLD
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

mgmdv3mode 1.3.6.1.4.1.890.1.5.12.46.13.18
Enable MLDv2 and IGMPv3 mode / Disable MLDv2 and IGMPv3 mode
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

igmpsnpVlanTable 1.3.6.1.4.1.890.1.5.12.46.13.14
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpsnpVlanEntry

igmpsnpVlanEntry 1.3.6.1.4.1.890.1.5.12.46.13.14.1
An entry in IgmpsnpVlanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IgmpsnpVlanEntry  

igmpsnpVid 1.3.6.1.4.1.890.1.5.12.46.13.14.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpsnpVlanName 1.3.6.1.4.1.890.1.5.12.46.13.14.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

igmpsnpVlanRowStatus 1.3.6.1.4.1.890.1.5.12.46.13.14.1.3
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ipSetup 1.3.6.1.4.1.890.1.5.12.46.14
OBJECT IDENTIFIER    

dnsIpAddress 1.3.6.1.4.1.890.1.5.12.46.14.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

defaultMgmt 1.3.6.1.4.1.890.1.5.12.46.14.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER in-band(0), out-of-band(1)  

inbandIpSetup 1.3.6.1.4.1.890.1.5.12.46.14.3
OBJECT IDENTIFIER    

inbandIpType 1.3.6.1.4.1.890.1.5.12.46.14.3.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dhcp-client(0), static-ip(1)  

inbandVid 1.3.6.1.4.1.890.1.5.12.46.14.3.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

inbandStaticIp 1.3.6.1.4.1.890.1.5.12.46.14.3.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

inbandStaticSubnetMask 1.3.6.1.4.1.890.1.5.12.46.14.3.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

inbandStaticGateway 1.3.6.1.4.1.890.1.5.12.46.14.3.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

outOfBandIpSetup 1.3.6.1.4.1.890.1.5.12.46.14.4
OBJECT IDENTIFIER    

outOfBandIp 1.3.6.1.4.1.890.1.5.12.46.14.4.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

outOfBandSubnetMask 1.3.6.1.4.1.890.1.5.12.46.14.4.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

outOfBandGateway 1.3.6.1.4.1.890.1.5.12.46.14.4.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

maxNumOfInbandIp 1.3.6.1.4.1.890.1.5.12.46.14.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

inbandIpTable 1.3.6.1.4.1.890.1.5.12.46.14.6
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    InbandIpEntry

inbandIpEntry 1.3.6.1.4.1.890.1.5.12.46.14.6.1
An entry in inbandIpTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  InbandIpEntry  

inbandEntryIp 1.3.6.1.4.1.890.1.5.12.46.14.6.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

inbandEntrySubnetMask 1.3.6.1.4.1.890.1.5.12.46.14.6.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

inbandEntryGateway 1.3.6.1.4.1.890.1.5.12.46.14.6.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

inbandEntryVid 1.3.6.1.4.1.890.1.5.12.46.14.6.1.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

inbandEntryManageable 1.3.6.1.4.1.890.1.5.12.46.14.6.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

inbandEntryRowStatus 1.3.6.1.4.1.890.1.5.12.46.14.6.1.6
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

filterSetup 1.3.6.1.4.1.890.1.5.12.46.15
OBJECT IDENTIFIER    

filterTable 1.3.6.1.4.1.890.1.5.12.46.15.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FilterEntry

filterEntry 1.3.6.1.4.1.890.1.5.12.46.15.1.1
An entry in filterTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  FilterEntry  

filterName 1.3.6.1.4.1.890.1.5.12.46.15.1.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

filterActionState 1.3.6.1.4.1.890.1.5.12.46.15.1.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER discard-source(1), discard-destination(2), both(3)  

filterMacAddr 1.3.6.1.4.1.890.1.5.12.46.15.1.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

filterVid 1.3.6.1.4.1.890.1.5.12.46.15.1.1.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

filterRowStatus 1.3.6.1.4.1.890.1.5.12.46.15.1.1.5
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

mirrorSetup 1.3.6.1.4.1.890.1.5.12.46.16
OBJECT IDENTIFIER    

mirrorState 1.3.6.1.4.1.890.1.5.12.46.16.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

mirrorMonitorPort 1.3.6.1.4.1.890.1.5.12.46.16.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

mirrorRspanVid 1.3.6.1.4.1.890.1.5.12.46.16.7
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

mirrorTable 1.3.6.1.4.1.890.1.5.12.46.16.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MirrorEntry

mirrorEntry 1.3.6.1.4.1.890.1.5.12.46.16.3.1
An entry in mirrorTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MirrorEntry  

mirrorMirroredState 1.3.6.1.4.1.890.1.5.12.46.16.3.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

mirrorDirection 1.3.6.1.4.1.890.1.5.12.46.16.3.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ingress(0), egress(1), both(2)  

aggrSetup 1.3.6.1.4.1.890.1.5.12.46.17
OBJECT IDENTIFIER    

aggrState 1.3.6.1.4.1.890.1.5.12.46.17.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

aggrSystemPriority 1.3.6.1.4.1.890.1.5.12.46.17.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

aggrGroupTable 1.3.6.1.4.1.890.1.5.12.46.17.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AggrGroupEntry

aggrGroupEntry 1.3.6.1.4.1.890.1.5.12.46.17.3.1
An entry in aggrGroupTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  AggrGroupEntry  

aggrGroupIndex 1.3.6.1.4.1.890.1.5.12.46.17.3.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

aggrGroupState 1.3.6.1.4.1.890.1.5.12.46.17.3.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

aggrGroupDynamicState 1.3.6.1.4.1.890.1.5.12.46.17.3.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

aggrPortTable 1.3.6.1.4.1.890.1.5.12.46.17.4
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AggrPortEntry

aggrPortEntry 1.3.6.1.4.1.890.1.5.12.46.17.4.1
An entry in aggrPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  AggrPortEntry  

aggrPortGroup 1.3.6.1.4.1.890.1.5.12.46.17.4.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), t1(1)  

aggrPortDynamicStateTimeout 1.3.6.1.4.1.890.1.5.12.46.17.4.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

accessCtlSetup 1.3.6.1.4.1.890.1.5.12.46.18
OBJECT IDENTIFIER    

accessCtlTable 1.3.6.1.4.1.890.1.5.12.46.18.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccessCtlEntry

accessCtlEntry 1.3.6.1.4.1.890.1.5.12.46.18.1.1
An entry in accessCtlTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  AccessCtlEntry  

accessCtlService 1.3.6.1.4.1.890.1.5.12.46.18.1.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER telnet(1), ssh(2), ftp(3), http(4), https(5), icmp(6), snmp(7)  

accessCtlEnable 1.3.6.1.4.1.890.1.5.12.46.18.1.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

accessCtlServicePort 1.3.6.1.4.1.890.1.5.12.46.18.1.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

accessCtlTimeout 1.3.6.1.4.1.890.1.5.12.46.18.1.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

securedClientTable 1.3.6.1.4.1.890.1.5.12.46.18.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SecuredClientEntry

securedClientEntry 1.3.6.1.4.1.890.1.5.12.46.18.2.1
An entry in securedClientTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SecuredClientEntry  

securedClientIndex 1.3.6.1.4.1.890.1.5.12.46.18.2.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

securedClientEnable 1.3.6.1.4.1.890.1.5.12.46.18.2.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

securedClientStartIp 1.3.6.1.4.1.890.1.5.12.46.18.2.1.3
IPv4 only
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

securedClientEndIp 1.3.6.1.4.1.890.1.5.12.46.18.2.1.4
IPv4 only
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

securedClientService 1.3.6.1.4.1.890.1.5.12.46.18.2.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  BITS telnet(0), ftp(1), http(2), icmp(3), snmp(4), ssh(5), https(6)  

securedClientIpAddrType 1.3.6.1.4.1.890.1.5.12.46.18.2.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType ipv4(1), ipv6(2)  

securedClientStartIpAddr 1.3.6.1.4.1.890.1.5.12.46.18.2.1.7
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

securedClientEndIpAddr 1.3.6.1.4.1.890.1.5.12.46.18.2.1.8
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

queuingMethodSetup 1.3.6.1.4.1.890.1.5.12.46.19
OBJECT IDENTIFIER    

queuingMethodType 1.3.6.1.4.1.890.1.5.12.46.19.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER strictly-priority(0), weighted-fair-scheduling(1), weighted-round-robin(2)  

portQueuingMethodTable 1.3.6.1.4.1.890.1.5.12.46.19.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortQueuingMethodEntry

portQueuingMethodEntry 1.3.6.1.4.1.890.1.5.12.46.19.2.1
An entry in portQueuingMethodTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortQueuingMethodEntry  

portQueuingMethodQueue 1.3.6.1.4.1.890.1.5.12.46.19.2.1.1
0...7
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

portQueuingMethodWeight 1.3.6.1.4.1.890.1.5.12.46.19.2.1.2
0...15
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

queuingMethodFeSpq 1.3.6.1.4.1.890.1.5.12.46.19.3
VDSL port SPQ enable. Qx and higher is SPQ, and the rest of the others are WFQ.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), q0(1), q1(2), q2(3), q3(4), q4(5), q5(6), q6(7), q7(8)  

portQueuingMethodGeSpqTable 1.3.6.1.4.1.890.1.5.12.46.19.4
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortQueuingMethodGeSpqEntry

portQueuingMethodGeSpqEntry 1.3.6.1.4.1.890.1.5.12.46.19.4.1
An entry in portQueuingMethodGeSpqTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortQueuingMethodGeSpqEntry  

portQueuingMethodGeSpq 1.3.6.1.4.1.890.1.5.12.46.19.4.1.1
GE port SPQ enable. Qx and higher is SPQ, and the rest of the others are WFQ.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), q0(1), q1(2), q2(3), q3(4), q4(5), q5(6), q6(7), q7(8)  

dhcpSetup 1.3.6.1.4.1.890.1.5.12.46.20
OBJECT IDENTIFIER    

globalDhcpRelay 1.3.6.1.4.1.890.1.5.12.46.20.1
OBJECT IDENTIFIER    

globalDhcpRelayEnable 1.3.6.1.4.1.890.1.5.12.46.20.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

globalDhcpRelayOption82Enable 1.3.6.1.4.1.890.1.5.12.46.20.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

globalDhcpRelayInfoData 1.3.6.1.4.1.890.1.5.12.46.20.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

maxNumberOfGlobalDhcpRelayRemoteServer 1.3.6.1.4.1.890.1.5.12.46.20.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

globalDhcpRelayRemoteServerTable 1.3.6.1.4.1.890.1.5.12.46.20.1.6
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GlobalDhcpRelayRemoteServerEntry

globalDhcpRelayRemoteServerEntry 1.3.6.1.4.1.890.1.5.12.46.20.1.6.1
An entry in globalDhcpRelayRemoteServerTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  GlobalDhcpRelayRemoteServerEntry  

globalDhcpRelayRemoteServerIp 1.3.6.1.4.1.890.1.5.12.46.20.1.6.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

globalDhcpRelayRemoteServerRowStatus 1.3.6.1.4.1.890.1.5.12.46.20.1.6.1.2
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

globalDhcpRelayRemoteIDEnable 1.3.6.1.4.1.890.1.5.12.46.20.1.7
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

globalDhcpRelayRemoteIDData 1.3.6.1.4.1.890.1.5.12.46.20.1.8
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

globalDhcpRelayInfoType 1.3.6.1.4.1.890.1.5.12.46.20.1.9
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER system(1), hostname(2)  

globalDhcpRelayRemoteIDType 1.3.6.1.4.1.890.1.5.12.46.20.1.10
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER system(1), portname(2)  

dhcpRelay 1.3.6.1.4.1.890.1.5.12.46.20.3
OBJECT IDENTIFIER    

maxNumberOfDhcpRelay 1.3.6.1.4.1.890.1.5.12.46.20.3.1
The maximum number of DHCP relay entries that can be created. A value of 0 for this object implies that there exists settings for global DHCP relay.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

maxNumberOfDhcpRelayRemoteServer 1.3.6.1.4.1.890.1.5.12.46.20.3.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpRelayTable 1.3.6.1.4.1.890.1.5.12.46.20.3.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpRelayEntry

dhcpRelayEntry 1.3.6.1.4.1.890.1.5.12.46.20.3.3.1
An entry in dhcpRelayTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  DhcpRelayEntry  

dhcpRelayOption82Enable 1.3.6.1.4.1.890.1.5.12.46.20.3.3.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

dhcpRelayInfoData 1.3.6.1.4.1.890.1.5.12.46.20.3.3.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

dhcpRelayRemoteIDEnable 1.3.6.1.4.1.890.1.5.12.46.20.3.3.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

dhcpRelayRemoteIDData 1.3.6.1.4.1.890.1.5.12.46.20.3.3.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

dhcpRelayInfoType 1.3.6.1.4.1.890.1.5.12.46.20.3.3.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER system(1), hostname(2)  

dhcpRelayRemoteIDType 1.3.6.1.4.1.890.1.5.12.46.20.3.3.1.7
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER system(1), portname(2)  

dhcpRelayRemoteServerTable 1.3.6.1.4.1.890.1.5.12.46.20.3.4
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpRelayRemoteServerEntry

dhcpRelayRemoteServerEntry 1.3.6.1.4.1.890.1.5.12.46.20.3.4.1
An entry in dhcpRelayRemoteServerTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  DhcpRelayRemoteServerEntry  

dhcpRelayVid 1.3.6.1.4.1.890.1.5.12.46.20.3.4.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpRelayRemoteServerIp 1.3.6.1.4.1.890.1.5.12.46.20.3.4.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

dhcpRelayRemoteServerRowStatus 1.3.6.1.4.1.890.1.5.12.46.20.3.4.1.3
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

staticRouteSetup 1.3.6.1.4.1.890.1.5.12.46.21
OBJECT IDENTIFIER    

maxNumberOfStaticRoutes 1.3.6.1.4.1.890.1.5.12.46.21.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

staticRouteTable 1.3.6.1.4.1.890.1.5.12.46.21.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StaticRouteEntry

staticRouteEntry 1.3.6.1.4.1.890.1.5.12.46.21.2.1
An entry in staticRouteTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  StaticRouteEntry  

staticRouteName 1.3.6.1.4.1.890.1.5.12.46.21.2.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

staticRouteIp 1.3.6.1.4.1.890.1.5.12.46.21.2.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

staticRouteMask 1.3.6.1.4.1.890.1.5.12.46.21.2.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

staticRouteGateway 1.3.6.1.4.1.890.1.5.12.46.21.2.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

staticRouteMetric 1.3.6.1.4.1.890.1.5.12.46.21.2.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

staticRouteRowStatus 1.3.6.1.4.1.890.1.5.12.46.21.2.1.6
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

arpInfo 1.3.6.1.4.1.890.1.5.12.46.22
OBJECT IDENTIFIER    

arpTable 1.3.6.1.4.1.890.1.5.12.46.22.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArpEntry

arpEntry 1.3.6.1.4.1.890.1.5.12.46.22.1.1
An entry in arpTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ArpEntry  

arpIndex 1.3.6.1.4.1.890.1.5.12.46.22.1.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

arpIpAddr 1.3.6.1.4.1.890.1.5.12.46.22.1.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

arpMacAddr 1.3.6.1.4.1.890.1.5.12.46.22.1.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

arpMacVid 1.3.6.1.4.1.890.1.5.12.46.22.1.1.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

arpType 1.3.6.1.4.1.890.1.5.12.46.22.1.1.5
1-static, 2-dynamic
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

portOpModeSetup 1.3.6.1.4.1.890.1.5.12.46.24
OBJECT IDENTIFIER    

portOpModePortTable 1.3.6.1.4.1.890.1.5.12.46.24.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortOpModePortEntry

portOpModePortEntry 1.3.6.1.4.1.890.1.5.12.46.24.1.1
An entry in portOpModePortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortOpModePortEntry  

portOpModePortSpeedDuplex 1.3.6.1.4.1.890.1.5.12.46.24.1.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(0), speed-10-half(1), speed-10-full(2), speed-100-half(3), speed-100-full(4), speed-1000-full(5)  

portOpModePortFlowCntl 1.3.6.1.4.1.890.1.5.12.46.24.1.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

portOpModePortName 1.3.6.1.4.1.890.1.5.12.46.24.1.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..9)  

portOpModePortModuleType 1.3.6.1.4.1.890.1.5.12.46.24.1.1.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fast-ethernet-10-100(0), gigabit-ethernet-100-1000(1)  

portOpModePortLinkUpType 1.3.6.1.4.1.890.1.5.12.46.24.1.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(0), copper(1), fiber(2)  

portOpModePortIntrusionLock 1.3.6.1.4.1.890.1.5.12.46.24.1.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

portOpModePortLBTestSetup 1.3.6.1.4.1.890.1.5.12.46.24.1.1.7
This entry display latest loopback test status of port while performing loopback test.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER internal-loopback-test(1), external-loopback-test(2), vtur-to-vtuo-loopback(3)  

portOpModePortLBTestStatus 1.3.6.1.4.1.890.1.5.12.46.24.1.1.8
This entry display latest loopback test status of port while performing loopback test.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), under-testing(1), success(2), fail(3)  

portOpModePortSwCounterReset 1.3.6.1.4.1.890.1.5.12.46.24.1.1.9
This entry resets port SW counter.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

portOpModePortVdslCounterReset 1.3.6.1.4.1.890.1.5.12.46.24.1.1.10
This entry resets port VDSL counter.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

portOpModePortVdslStatus 1.3.6.1.4.1.890.1.5.12.46.24.1.1.11
This entry reports VDSL link current status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), standby(2), showtime(3)  

portOpModePortVdslUptime 1.3.6.1.4.1.890.1.5.12.46.24.1.1.12
This entry reports VDSL link current link up time.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

portOpModePortLBTable 1.3.6.1.4.1.890.1.5.12.46.24.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortOpModePortLBEntry

portOpModePortLBEntry 1.3.6.1.4.1.890.1.5.12.46.24.2.1
An entry in portOpModePortLBTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortOpModePortLBEntry  

portOpModePortLBActive 1.3.6.1.4.1.890.1.5.12.46.24.2.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1)  

portOpModePortLBNumber 1.3.6.1.4.1.890.1.5.12.46.24.2.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

portOpModePortLBCount 1.3.6.1.4.1.890.1.5.12.46.24.2.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

portOpModePortLBPktSize 1.3.6.1.4.1.890.1.5.12.46.24.2.1.4
Packet size range from 64 bytes to 1518 bytes
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

portOpModePortLBResultTable 1.3.6.1.4.1.890.1.5.12.46.24.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortOpModePortLBResultEntry

portOpModePortLBResultEntry 1.3.6.1.4.1.890.1.5.12.46.24.3.1
An entry in portOpModePortLBResultTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortOpModePortLBResultEntry  

portOpModePortLBMaxRTT 1.3.6.1.4.1.890.1.5.12.46.24.3.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

portOpModePortLBMinRTT 1.3.6.1.4.1.890.1.5.12.46.24.3.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

portOpModePortLBAvgRTT 1.3.6.1.4.1.890.1.5.12.46.24.3.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

portOpModePortLBPktLossRate 1.3.6.1.4.1.890.1.5.12.46.24.3.1.4
Loopback Packet loss rate
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

portOpModePortLBStatus 1.3.6.1.4.1.890.1.5.12.46.24.3.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(0), in-progress(1), complete(2)  

portBasedVlanSetup 1.3.6.1.4.1.890.1.5.12.46.25
OBJECT IDENTIFIER    

portBasedVlanPortListTable 1.3.6.1.4.1.890.1.5.12.46.25.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortBasedVlanPortListEntry

portBasedVlanPortListEntry 1.3.6.1.4.1.890.1.5.12.46.25.1.1
An entry in portBasedVlanPortListTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortBasedVlanPortListEntry  

portBasedVlanPortListMembers 1.3.6.1.4.1.890.1.5.12.46.25.1.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  PortList  

faultMIB 1.3.6.1.4.1.890.1.5.12.46.26
OBJECT IDENTIFIER    

eventObjects 1.3.6.1.4.1.890.1.5.12.46.26.1
OBJECT IDENTIFIER    

eventTable 1.3.6.1.4.1.890.1.5.12.46.26.1.1
A list of currently active fault events. All faults of normal type regardless of their severity level are recorded in the event table. When a normal type fault is cleared it is deleted from the event table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    EventEntry

eventEntry 1.3.6.1.4.1.890.1.5.12.46.26.1.1.1
An entry containing information about an event in the event table.
Status: current Access: not-accessible
OBJECT-TYPE    
  EventEntry  

eventSeqNum 1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.1
This variable represents the sequence number of an event. Sequence number is incremented monotonically starting from 0 until it reaches its maximum and wraps around back to 0. Sequence number is incremented when - the state of a normal type fault is set on (the same sequence number is present in the events table as well as in the trap that is sent to notify about the fault on event) - delta event occurs (sequence number present in trap message) - the state of a normal type fault is set off (sequence number present in trap that is sent to notify for clearing).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eventEventId 1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.2
This variable represents the event ID which uniquely identifies the event in the entire system.
Status: current Access: read-only
OBJECT-TYPE    
  EventIdNumber  

eventName 1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.3
This variable represents the name of the event, for example 'Ethernet Link Down'
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..40)  

eventInstanceType 1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.4
This variable represents the type of InstanceId of a particular event in the event table. In brief the instanceType refers to the type of sub-component generating this event in the system, for example switch (5). For more details see the textual conventions section. AFFECTS: eventInstanceId, eventInstanceName
Status: current Access: read-only
OBJECT-TYPE    
  InstanceType  

eventInstanceId 1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.5
This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this event in the system, for example '1' for port 1. For more details see the textual conventions section. DEPENDS ON: eventInstanceType
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eventInstanceName 1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.6
This variable is mainly used to store additional information about the sub-component that is generating an event. For example this field may specify what cooling fan is faulty. DEPENDS ON: eventInstanceType
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

eventSeverity 1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.7
This variable dictates the urgency of action when a event occurs. There are four severity levels - Critical, Major, Minor, and Informational. Critical events are those, which require immediate operator intervention to prevent/reduce system down time. Major events require quick attention and Minor events possibly require some attention. Informational events indicate the occurrence of events that may need to be investigated.
Status: current Access: read-only
OBJECT-TYPE    
  EventSeverity  

eventSetTime 1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.8
This table contains only normal events and this variable represents the time when the event become active, i.e. the number of seconds since Jan 1, 1970 12:00AM.
Status: current Access: read-only
OBJECT-TYPE    
  UtcTimeStamp  

eventDescription 1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.9
This variable contains a description of the event and reasons behind the event. This is a free format alpha-numeric string that is set by the entity generating this event. This variable may be empty if there is no usefull information to report. The maximum length of this string is 255 characters.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

eventServAffective 1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.10
This variable indicates whether the event is service affective or not
Status: current Access: read-only
OBJECT-TYPE    
  EventServiceAffective  

eventInstanceIdNumber 1.3.6.1.4.1.890.1.5.12.46.26.1.1.1.11
This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this event in the system, for example '1' for port 1. For more details see the textual conventions section. DEPENDS ON: eventInstanceType
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

faultTrapsMIB 1.3.6.1.4.1.890.1.5.12.46.27
OBJECT IDENTIFIER    

trapInfoObjects 1.3.6.1.4.1.890.1.5.12.46.27.1
OBJECT IDENTIFIER    

trapNotifications 1.3.6.1.4.1.890.1.5.12.46.27.2
OBJECT IDENTIFIER    

trapRefSeqNum 1.3.6.1.4.1.890.1.5.12.46.27.1.1
Indicates the former sequence number of a cleared event in the event table. Not intended to read but only used in trap notifications.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

trapPersistence 1.3.6.1.4.1.890.1.5.12.46.27.1.2
Indicates whether the event is delta (automatically and immediately cleared) or normal (not automatically cleared). Not intended to read but only used in trap notifications.
Status: current Access: read-only
OBJECT-TYPE    
  EventPersistence  

trapSenderNodeId 1.3.6.1.4.1.890.1.5.12.46.27.1.3
Represents the node ID of the sending network element. If not supported should be set to 0. Not intended to read but only used in trap notifications.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

trapSenderStatus 1.3.6.1.4.1.890.1.5.12.46.27.1.4
Represents the trap status. 0 means cleared, 1 means happened.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

eventOnTrap 1.3.6.1.4.1.890.1.5.12.46.27.2.1
This trap is used to inform network management system that a delta fault event (events that are automatically cleared) has occured or a normal fault event (not automatically cleared) state has been set on. Objects are used as follows: - eventSeqNum is the sequence number of the event. For normal type of events must equal to the sequence number of the event in the events table. - eventEventId specifies what fault event has occured. - eventName specifies the name of the fault event. - eventSetTime indicates when fault event has occured (delta events) or when fault has been set on (normal events). - eventSeverity reports the severity level of the event. - eventInstanceType indicates what kind of object is faulty. - eventInstanceId specifies what instance is faulty. - eventInstanceName may contain textual description for the faulty object. - eventServAffective specifies whether the event is immediately service affcetive. - eventDescription reports possible additional information about the event. - trapPersistence tells whether this event is a delta or normal event. - trapSenderNodeId specifies the node ID of the sending network element if configuring it is supported for the network element, otherwise 0. - trapSenderStatus specifes the trap status. - sysObjectID specifies what kind of equipment reports the fault event. For more information see the eventTable specification
Status: current Access: read-only
NOTIFICATION-TYPE    

eventClearedTrap 1.3.6.1.4.1.890.1.5.12.46.27.2.2
This trap is used to inform network management system that a normal type fault event has been cleared (state set off). Objects are used as follows: - eventSeqNum is the sequence number of the this clearing event. Note that the sequence number of the cleared event is reported in the trapRefSeqNum object. - eventEventId specifies what event has been cleared. - eventSetTime indicates when fault event has been cleared. - eventInstanceType indicates what kind of object has been faulty. - eventInstanceId specifies what instance has been faulty. - trapRefSeqNum specifies the sequence number of the cleared event (i.e. the sequence number was assigned for the event in the events table). - trapSenderNodeId specifies the node ID of the sending network element if configuring it is supported for the network element, otherwise 0. - sysObjectID specifies what kind of equipment reports the clearing event. For more information see the eventTable specification
Status: current Access: read-only
NOTIFICATION-TYPE    

multicastPortSetup 1.3.6.1.4.1.890.1.5.12.46.28
OBJECT IDENTIFIER    

multicastPortTable 1.3.6.1.4.1.890.1.5.12.46.28.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MulticastPortEntry

multicastPortEntry 1.3.6.1.4.1.890.1.5.12.46.28.1.1
An entry in multicastPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MulticastPortEntry  

multicastPortImmediateLeave 1.3.6.1.4.1.890.1.5.12.46.28.1.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

multicastPortMaxGroupLimited 1.3.6.1.4.1.890.1.5.12.46.28.1.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

multicastPortMaxOfGroup 1.3.6.1.4.1.890.1.5.12.46.28.1.1.3
0..255
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

multicastPortIgmpFilteringProfile 1.3.6.1.4.1.890.1.5.12.46.28.1.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

multicastPortQueryMode 1.3.6.1.4.1.890.1.5.12.46.28.1.1.5
Specify query mode for each port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto-mode(1), fix-mode(2), edge-mode(3)  

igmpMsgMaxLimited 1.3.6.1.4.1.890.1.5.12.46.28.1.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

igmpMsgLimit 1.3.6.1.4.1.890.1.5.12.46.28.1.1.7
0..255
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

multicastStatus 1.3.6.1.4.1.890.1.5.12.46.29
OBJECT IDENTIFIER    

multicastStatusTable 1.3.6.1.4.1.890.1.5.12.46.29.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MulticastStatusEntry

multicastStatusEntry 1.3.6.1.4.1.890.1.5.12.46.29.1.1
An entry in multicastStatusTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MulticastStatusEntry  

multicastStatusIndex 1.3.6.1.4.1.890.1.5.12.46.29.1.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

multicastStatusVlanID 1.3.6.1.4.1.890.1.5.12.46.29.1.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

multicastStatusPort 1.3.6.1.4.1.890.1.5.12.46.29.1.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

multicastStatusGroup 1.3.6.1.4.1.890.1.5.12.46.29.1.1.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

multicastStatusJoinCounter 1.3.6.1.4.1.890.1.5.12.46.29.1.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

multicastStatusLeaveCounter 1.3.6.1.4.1.890.1.5.12.46.29.1.1.6
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpCountTable 1.3.6.1.4.1.890.1.5.12.46.29.2
A count table of igmp query/report/leave message.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpCountEntry

igmpCountEntry 1.3.6.1.4.1.890.1.5.12.46.29.2.1
An entry in igmpCountTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IgmpCountEntry  

igmpCountIndex 1.3.6.1.4.1.890.1.5.12.46.29.2.1.1
Index of IgmpCountEntry. 0 means total count in whole system
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpCountInQuery 1.3.6.1.4.1.890.1.5.12.46.29.2.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpCountInReport 1.3.6.1.4.1.890.1.5.12.46.29.2.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpCountInLeave 1.3.6.1.4.1.890.1.5.12.46.29.2.1.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpCountInQueryDrop 1.3.6.1.4.1.890.1.5.12.46.29.2.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpCountInReportDrop 1.3.6.1.4.1.890.1.5.12.46.29.2.1.6
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpCountInLeaveDrop 1.3.6.1.4.1.890.1.5.12.46.29.2.1.7
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpCountOutQuery 1.3.6.1.4.1.890.1.5.12.46.29.2.1.8
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpCountOutReport 1.3.6.1.4.1.890.1.5.12.46.29.2.1.9
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpCountOutLeave 1.3.6.1.4.1.890.1.5.12.46.29.2.1.10
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

multicastVlanStatusTable 1.3.6.1.4.1.890.1.5.12.46.29.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MulticastVlanStatusEntry

multicastVlanStatusEntry 1.3.6.1.4.1.890.1.5.12.46.29.3.1
An entry in multicastVlanStatusTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MulticastVlanStatusEntry  

multicastVlanStatusVlanID 1.3.6.1.4.1.890.1.5.12.46.29.3.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

multicastVlanStatusType 1.3.6.1.4.1.890.1.5.12.46.29.3.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dynamic(1), mvr(2), static(3)  

multicastVlanQueryPort 1.3.6.1.4.1.890.1.5.12.46.29.3.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

multicastVlanQuerySrcIp 1.3.6.1.4.1.890.1.5.12.46.29.3.1.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

igmpCounterPortTable 1.3.6.1.4.1.890.1.5.12.46.29.4
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpCounterPortEntry

igmpCounterPortEntry 1.3.6.1.4.1.890.1.5.12.46.29.4.1
An entry in igmpCounterPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IgmpCounterPortEntry  

igmpCounterPortJoin 1.3.6.1.4.1.890.1.5.12.46.29.4.1.1
Join counter for the port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

igmpCounterPortLeave 1.3.6.1.4.1.890.1.5.12.46.29.4.1.2
Leave counter for the port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

igmpCounterPortActiveGroup 1.3.6.1.4.1.890.1.5.12.46.29.4.1.3
Current active group for the port
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpCounterPortQuery 1.3.6.1.4.1.890.1.5.12.46.29.4.1.4
Query counter for the port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

igmpCounterVlanTable 1.3.6.1.4.1.890.1.5.12.46.29.5
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpCounterVlanEntry

igmpCounterVlanEntry 1.3.6.1.4.1.890.1.5.12.46.29.5.1
An entry in igmpCounterVlanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IgmpCounterVlanEntry  

igmpCounterVlanJoin 1.3.6.1.4.1.890.1.5.12.46.29.5.1.1
Join counter for the Vlan.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

igmpCounterVlanLeave 1.3.6.1.4.1.890.1.5.12.46.29.5.1.2
Leave counter for the Vlan.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

igmpCounterVlanActiveGroup 1.3.6.1.4.1.890.1.5.12.46.29.5.1.3
Current active group for the Vlan
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpCounterVlanQuery 1.3.6.1.4.1.890.1.5.12.46.29.5.1.4
Query counter for the Vlan.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

multicastCurrentGroupStatusTable 1.3.6.1.4.1.890.1.5.12.46.29.6
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MulticastCurrentGroupStatusEntry

multicastCurrentGroupStatusEntry 1.3.6.1.4.1.890.1.5.12.46.29.6.1
An entry in multicastCurrentGroupStatusTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MulticastCurrentGroupStatusEntry  

multicastCurrentNumberOfActivePort 1.3.6.1.4.1.890.1.5.12.46.29.6.1.1
Current number Of active port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

multicastClientSrcIpTable 1.3.6.1.4.1.890.1.5.12.46.29.7
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MulticastClientSrcIpEntry

multicastClientSrcIpEntry 1.3.6.1.4.1.890.1.5.12.46.29.7.1
An entry in multicastClientSrcIpTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MulticastClientSrcIpEntry  

multicastClientSrcIpIndex 1.3.6.1.4.1.890.1.5.12.46.29.7.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

multicastClientSrcIpAddress 1.3.6.1.4.1.890.1.5.12.46.29.7.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

mgmdStatusTable 1.3.6.1.4.1.890.1.5.12.46.29.8
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGMDStatusEntry

mgmdStatusEntry 1.3.6.1.4.1.890.1.5.12.46.29.8.1
An entry in mgmdStatusTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MGMDStatusEntry  

mgmdStatusIndex 1.3.6.1.4.1.890.1.5.12.46.29.8.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mgmdStatusVlanID 1.3.6.1.4.1.890.1.5.12.46.29.8.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mgmdStatusPort 1.3.6.1.4.1.890.1.5.12.46.29.8.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mgmdStatusGroupAddressType 1.3.6.1.4.1.890.1.5.12.46.29.8.1.4
The address type of the mgmdStatusGroupAddress entry.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType ipv4(1), ipv6(2)  

mgmdStatusGroupAddress 1.3.6.1.4.1.890.1.5.12.46.29.8.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(4|16)  

mgmdStatusGroupFilterMode 1.3.6.1.4.1.890.1.5.12.46.29.8.1.6
The current cache state, applicable to MGMDv3-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER include(1), exclude(2)  

mgmdCountTable 1.3.6.1.4.1.890.1.5.12.46.29.9
A count table of igmp/MLD query/report/leave message.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGMDCountEntry

mgmdCountEntry 1.3.6.1.4.1.890.1.5.12.46.29.9.1
An entry in mgmdCountTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MGMDCountEntry  

mgmdCountIndex 1.3.6.1.4.1.890.1.5.12.46.29.9.1.1
Index of mgmdCountEntry. 0 means total count in whole system
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mgmdCountInQuery 1.3.6.1.4.1.890.1.5.12.46.29.9.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mgmdCountInReport 1.3.6.1.4.1.890.1.5.12.46.29.9.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mgmdCountInLeave 1.3.6.1.4.1.890.1.5.12.46.29.9.1.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mgmdCountInQueryDrop 1.3.6.1.4.1.890.1.5.12.46.29.9.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mgmdCountInReportDrop 1.3.6.1.4.1.890.1.5.12.46.29.9.1.6
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mgmdCountInLeaveDrop 1.3.6.1.4.1.890.1.5.12.46.29.9.1.7
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mgmdCountOutQuery 1.3.6.1.4.1.890.1.5.12.46.29.9.1.8
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mgmdCountOutReport 1.3.6.1.4.1.890.1.5.12.46.29.9.1.9
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mgmdCountOutLeave 1.3.6.1.4.1.890.1.5.12.46.29.9.1.10
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mgmdVlanStatusTable 1.3.6.1.4.1.890.1.5.12.46.29.10
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGMDVlanStatusEntry

mgmdVlanStatusEntry 1.3.6.1.4.1.890.1.5.12.46.29.10.1
An entry in mgmdVlanStatusTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MGMDVlanStatusEntry  

mgmdVlanStatusVlanID 1.3.6.1.4.1.890.1.5.12.46.29.10.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mgmdVlanStatusType 1.3.6.1.4.1.890.1.5.12.46.29.10.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dynamic(1), mvr(2), static(3)  

mgmdVlanQueryPort 1.3.6.1.4.1.890.1.5.12.46.29.10.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

mgmdVlanQuerySrcIpType 1.3.6.1.4.1.890.1.5.12.46.29.10.1.4
The address type of the mgmdVlanQuerySrcIp entry.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType ipv4(1), ipv6(2)  

mgmdVlanQuerySrcIp 1.3.6.1.4.1.890.1.5.12.46.29.10.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(4|16)  

mgmdCounterPortTable 1.3.6.1.4.1.890.1.5.12.46.29.11
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGMDCounterPortEntry

mgmdCounterPortEntry 1.3.6.1.4.1.890.1.5.12.46.29.11.1
An entry in mgmdCounterPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MGMDCounterPortEntry  

mgmdCounterPortReport 1.3.6.1.4.1.890.1.5.12.46.29.11.1.1
Report counter for the port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmdCounterPortLeave 1.3.6.1.4.1.890.1.5.12.46.29.11.1.2
Leave counter for the port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmdCounterPortActiveGroup 1.3.6.1.4.1.890.1.5.12.46.29.11.1.3
Current active group for the port
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mgmdCounterPortQuery 1.3.6.1.4.1.890.1.5.12.46.29.11.1.4
Query counter for the port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmdCounterPortReportDrop 1.3.6.1.4.1.890.1.5.12.46.29.11.1.5
Report drop counter for the port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmdCounterPortQueryDrop 1.3.6.1.4.1.890.1.5.12.46.29.11.1.6
Query drop counter for the port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmdCounterVlanTable 1.3.6.1.4.1.890.1.5.12.46.29.12
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGMDCounterVlanEntry

mgmdCounterVlanEntry 1.3.6.1.4.1.890.1.5.12.46.29.12.1
An entry in mgmdCounterVlanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MGMDCounterVlanEntry  

mgmdCounterVlanReport 1.3.6.1.4.1.890.1.5.12.46.29.12.1.1
Report counter for the Vlan.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmdCounterVlanLeave 1.3.6.1.4.1.890.1.5.12.46.29.12.1.2
Leave counter for the Vlan.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmdCounterVlanActiveGroup 1.3.6.1.4.1.890.1.5.12.46.29.12.1.3
Current active group for the Vlan
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mgmdCounterVlanQuery 1.3.6.1.4.1.890.1.5.12.46.29.12.1.4
Query counter for the Vlan.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmdCounterVlanReportDrop 1.3.6.1.4.1.890.1.5.12.46.29.12.1.5
Report drop counter for the Vlan.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmdCounterVlanQueryDrop 1.3.6.1.4.1.890.1.5.12.46.29.12.1.6
Query Drop counter for the Vlan.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mgmdCurrentGroupStatusTable 1.3.6.1.4.1.890.1.5.12.46.29.13
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGMDCurrentGroupStatusEntry

mgmdCurrentGroupStatusEntry 1.3.6.1.4.1.890.1.5.12.46.29.13.1
An entry in mgmdCurrentGroupStatusTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MGMDCurrentGroupStatusEntry  

mgmdCurrentNumberOfActivePort 1.3.6.1.4.1.890.1.5.12.46.29.13.1.1
Current number Of active port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mgmdClientSrcIpTable 1.3.6.1.4.1.890.1.5.12.46.29.14
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGMDClientSrcIpEntry

mgmdClientSrcIpEntry 1.3.6.1.4.1.890.1.5.12.46.29.14.1
An entry in mgmdClientSrcIpTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MGMDClientSrcIpEntry  

mgmdClientSrcIpIndex 1.3.6.1.4.1.890.1.5.12.46.29.14.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mgmdClientSrcIpAddressType 1.3.6.1.4.1.890.1.5.12.46.29.14.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType ipv4(1), ipv6(2)  

mgmdClientSrcIpAddress 1.3.6.1.4.1.890.1.5.12.46.29.14.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress Size(4|16)  

mgmdSrcListTable 1.3.6.1.4.1.890.1.5.12.46.29.15
The (conceptual) table listing the Source List entries corresponding to each interface and multicast group pair on a host.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MGMDSrcListEntry

mgmdSrcListEntry 1.3.6.1.4.1.890.1.5.12.46.29.15.1
An entry (conceptual row) in the mgmdSrcListTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MGMDSrcListEntry  

mgmdSrcListAddressType 1.3.6.1.4.1.890.1.5.12.46.29.15.1.1
The address type of the InetAddress variables in this table. This value applies to the mgmdStatusGroupAddress and mgmdSrcListAddress entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType ipv4(1), ipv6(2)  

mgmdSrcListAddress 1.3.6.1.4.1.890.1.5.12.46.29.15.1.2
The IP multicast group address for which this entry contains information.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress Size(4|16)  

igmpFilteringProfileSetup 1.3.6.1.4.1.890.1.5.12.46.30
OBJECT IDENTIFIER    

igmpFilteringMaxNumberOfProfile 1.3.6.1.4.1.890.1.5.12.46.30.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

igmpFilteringProfileTable 1.3.6.1.4.1.890.1.5.12.46.30.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IgmpFilteringProfileEntry

igmpFilteringProfileEntry 1.3.6.1.4.1.890.1.5.12.46.30.2.1
An entry in igmpFilteringProfileTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  IgmpFilteringProfileEntry  

igmpFilteringProfileName 1.3.6.1.4.1.890.1.5.12.46.30.2.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

igmpFilteringProfileStartAddress 1.3.6.1.4.1.890.1.5.12.46.30.2.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

igmpFilteringProfileEndAddress 1.3.6.1.4.1.890.1.5.12.46.30.2.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

igmpFilteringProfileRowStatus 1.3.6.1.4.1.890.1.5.12.46.30.2.1.4
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

mgmdFilterProfileTable 1.3.6.1.4.1.890.1.5.12.46.30.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MgmdFilterProfileEntry

mgmdFilterProfileEntry 1.3.6.1.4.1.890.1.5.12.46.30.3.1
An entry in mgmdFilterProfileTable.For v4 and v6 address
Status: current Access: not-accessible
OBJECT-TYPE    
  MgmdFilterProfileEntry  

mgmdFilterProfileName 1.3.6.1.4.1.890.1.5.12.46.30.3.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mgmdFilterProfileAddressType 1.3.6.1.4.1.890.1.5.12.46.30.3.1.2
The type of the mgmdFilterProfileStartAddress and mgmdFilterProfileEndAddress address, as defined in the InetAddress MIB.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

mgmdFilterProfileStartAddress 1.3.6.1.4.1.890.1.5.12.46.30.3.1.3
The Start IP address of this profile.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

mgmdFilterProfileEndAddress 1.3.6.1.4.1.890.1.5.12.46.30.3.1.4
The End IP address of this profile.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

mgmdFilterProfileRowStatus 1.3.6.1.4.1.890.1.5.12.46.30.3.1.5
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

mvrSetup 1.3.6.1.4.1.890.1.5.12.46.31
OBJECT IDENTIFIER    

maxNumberOfMVR 1.3.6.1.4.1.890.1.5.12.46.31.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mvrTable 1.3.6.1.4.1.890.1.5.12.46.31.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MvrEntry

mvrEntry 1.3.6.1.4.1.890.1.5.12.46.31.2.1
An entry in mvrTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MvrEntry  

mvrVlanID 1.3.6.1.4.1.890.1.5.12.46.31.2.1.1
1..4094
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mvrName 1.3.6.1.4.1.890.1.5.12.46.31.2.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mvrMode 1.3.6.1.4.1.890.1.5.12.46.31.2.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dynamic(0), compatible(1)  

mvrRowStatus 1.3.6.1.4.1.890.1.5.12.46.31.2.1.4
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

mvr8021pPriority 1.3.6.1.4.1.890.1.5.12.46.31.2.1.5
Set the 802.1p priority of control messages within MVR (0~7)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

mvrPortTable 1.3.6.1.4.1.890.1.5.12.46.31.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MvrPortEntry

mvrPortEntry 1.3.6.1.4.1.890.1.5.12.46.31.3.1
An entry in mvrPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MvrPortEntry  

mvrPortRole 1.3.6.1.4.1.890.1.5.12.46.31.3.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), source-port(2), receiver-port(3)  

mvrPortTagging 1.3.6.1.4.1.890.1.5.12.46.31.3.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

maxNumberOfMvrGroup 1.3.6.1.4.1.890.1.5.12.46.31.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mvrGroupTable 1.3.6.1.4.1.890.1.5.12.46.31.5
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MvrGroupEntry

mvrGroupEntry 1.3.6.1.4.1.890.1.5.12.46.31.5.1
An entry in mvrGroupTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MvrGroupEntry  

mvrGroupName 1.3.6.1.4.1.890.1.5.12.46.31.5.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mvrGroupStartAddress 1.3.6.1.4.1.890.1.5.12.46.31.5.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

mvrGroupEndAddress 1.3.6.1.4.1.890.1.5.12.46.31.5.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

mvrGroupRowStatus 1.3.6.1.4.1.890.1.5.12.46.31.5.1.4
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

mvrBehavior 1.3.6.1.4.1.890.1.5.12.46.31.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER igmp-snooping(1), igmp-proxy(2)  

mvrMgmdGroupTable 1.3.6.1.4.1.890.1.5.12.46.31.7
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MvrMgmdGroupEntry

mvrMgmdGroupEntry 1.3.6.1.4.1.890.1.5.12.46.31.7.1
An entry in mvrMgmdGroupTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MvrMgmdGroupEntry  

mvrMgmdGroupName 1.3.6.1.4.1.890.1.5.12.46.31.7.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

mvrMgmdGroupAddressType 1.3.6.1.4.1.890.1.5.12.46.31.7.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

mvrMgmdGroupStartAddress 1.3.6.1.4.1.890.1.5.12.46.31.7.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

mvrMgmdGroupEndAddress 1.3.6.1.4.1.890.1.5.12.46.31.7.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

mvrMgmdGroupRowStatus 1.3.6.1.4.1.890.1.5.12.46.31.7.1.5
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sysLogSetup 1.3.6.1.4.1.890.1.5.12.46.33
OBJECT IDENTIFIER    

sysLogState 1.3.6.1.4.1.890.1.5.12.46.33.1
sysLog enabled/disabled for the switch.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

sysLogTypeTable 1.3.6.1.4.1.890.1.5.12.46.33.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysLogTypeEntry

sysLogTypeEntry 1.3.6.1.4.1.890.1.5.12.46.33.2.1
An entry in sysLogTypeTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SysLogTypeEntry  

sysLogTypeIndex 1.3.6.1.4.1.890.1.5.12.46.33.2.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

sysLogTypeName 1.3.6.1.4.1.890.1.5.12.46.33.2.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

sysLogTypeState 1.3.6.1.4.1.890.1.5.12.46.33.2.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

sysLogTypeFacility 1.3.6.1.4.1.890.1.5.12.46.33.2.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER local-user0(0), local-user1(1), local-user2(2), local-user3(3), local-user4(4), local-user5(5), local-user6(6), local-user7(7)  

sysLogServerTable 1.3.6.1.4.1.890.1.5.12.46.33.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysLogServerEntry

sysLogServerEntry 1.3.6.1.4.1.890.1.5.12.46.33.3.1
An entry in sysLogServerTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SysLogServerEntry  

sysLogServerAddress 1.3.6.1.4.1.890.1.5.12.46.33.3.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

sysLogServerLogLevel 1.3.6.1.4.1.890.1.5.12.46.33.3.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER level0(0), level0-1(1), level0-2(2), level0-3(3), level0-4(4), level0-5(5), level0-6(6), level0-7(7)  

sysLogServerRowStatus 1.3.6.1.4.1.890.1.5.12.46.33.3.1.3
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

sysLogServerInfoTable 1.3.6.1.4.1.890.1.5.12.46.33.4
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SysLogServerInfoEntry

sysLogServerInfoEntry 1.3.6.1.4.1.890.1.5.12.46.33.4.1
An entry in sysLogServerInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SysLogServerInfoEntry  

sysLogServerInfoIpAddrType 1.3.6.1.4.1.890.1.5.12.46.33.4.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType ipv4(1), ipv6(2)  

sysLogServerInfoIpAddr 1.3.6.1.4.1.890.1.5.12.46.33.4.1.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress  

sysLogServerInfoLogLevel 1.3.6.1.4.1.890.1.5.12.46.33.4.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER level0(0), level0-1(1), level0-2(2), level0-3(3), level0-4(4), level0-5(5), level0-6(6), level0-7(7)  

sysLogServerInfoRowStatus 1.3.6.1.4.1.890.1.5.12.46.33.4.1.4
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

diffservSetup 1.3.6.1.4.1.890.1.5.12.46.34
OBJECT IDENTIFIER    

diffservState 1.3.6.1.4.1.890.1.5.12.46.34.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

diffservMapTable 1.3.6.1.4.1.890.1.5.12.46.34.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DiffservMapEntry

diffservMapEntry 1.3.6.1.4.1.890.1.5.12.46.34.2.1
An entry in diffservMapTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  DiffservMapEntry  

diffservMapDscp 1.3.6.1.4.1.890.1.5.12.46.34.2.1.1
0-63
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

diffservMapPriority 1.3.6.1.4.1.890.1.5.12.46.34.2.1.2
0-7
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

diffservPortTable 1.3.6.1.4.1.890.1.5.12.46.34.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DiffservPortEntry

diffservPortEntry 1.3.6.1.4.1.890.1.5.12.46.34.3.1
An entry in diffservPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  DiffservPortEntry  

diffservPortState 1.3.6.1.4.1.890.1.5.12.46.34.3.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

vturSwitchSetup 1.3.6.1.4.1.890.1.5.12.46.35
OBJECT IDENTIFIER    

vturLayer2Setup 1.3.6.1.4.1.890.1.5.12.46.35.1
OBJECT IDENTIFIER    

layer2Table 1.3.6.1.4.1.890.1.5.12.46.35.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Layer2Entry

layer2Entry 1.3.6.1.4.1.890.1.5.12.46.35.1.1.1
An entry in layer2Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Layer2Entry  

vturIgmpSnoopingStateSetup 1.3.6.1.4.1.890.1.5.12.46.35.1.1.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vturPortSetup 1.3.6.1.4.1.890.1.5.12.46.35.2
OBJECT IDENTIFIER    

portTable 1.3.6.1.4.1.890.1.5.12.46.35.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortEntry

portEntry 1.3.6.1.4.1.890.1.5.12.46.35.2.1.1
An entry in portTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortEntry  

portNumber 1.3.6.1.4.1.890.1.5.12.46.35.2.1.1.1
Display all ports we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

portAdminStatus 1.3.6.1.4.1.890.1.5.12.46.35.2.1.1.2
Specify CPE port's admin status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

portOperStatus 1.3.6.1.4.1.890.1.5.12.46.35.2.1.1.3
CPE port's current status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

portSpeedDuplex 1.3.6.1.4.1.890.1.5.12.46.35.2.1.1.4
Specify each port's speed and duplex in CPE side.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER autoneg(1), half-10M(2), full-10M(3), half-100M(4), full-100M(5)  

portOperSpeed 1.3.6.1.4.1.890.1.5.12.46.35.2.1.1.8
CPE port's current speed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER linkdown(0), autoneg(1), half-10M(2), full-10M(3), half-100M(4), full-100M(5)  

vturWanSetup 1.3.6.1.4.1.890.1.5.12.46.35.4
OBJECT IDENTIFIER    

vturWan 1.3.6.1.4.1.890.1.5.12.46.35.4.1
OBJECT IDENTIFIER    

vturWanTable 1.3.6.1.4.1.890.1.5.12.46.35.4.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturWanEntry

vturWanEntry 1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1
An entry in vturWanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturWanEntry  

vturWanIndex 1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.1
Display the wan index range from 1 to 4 we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturVlanTagging 1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.2
Display the vlan tagging we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), vlan-mux(2), auto-vlan(3)  

vturVlanID 1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.3
Display the vlan id range from 1 to 4094 we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vtur8021p 1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.4
Display the 802.1p value range from 0 to 7 we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vturPPPUsername 1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.5
Display the PPP username we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

vturPPPPassword 1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.6
Display the PPP password we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

vturWanProtocol 1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.7
Display the wan protocol info we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pppoe(1), mer(2), bridge(3)  

vturWanProtocolSetting 1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.8
Display the wan service enable/disable status we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  BITS dhcp-client-(0), nat(1), firewall(2), igmp(3)  

vturWanIP 1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.9
Display the wan IP setting we got in CPE side
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vturWanSubnetMask 1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.10
Display the wan subnet mask we got in CPE side
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

vturWanService 1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.11
Display the wan service enable/disable status we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

vturWanRowStatus 1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.12
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vturWanDefaultGateway 1.3.6.1.4.1.890.1.5.12.46.35.4.1.1.1.13
Display the wan default gateway enable/disable status we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

vturWanCommon 1.3.6.1.4.1.890.1.5.12.46.35.4.2
OBJECT IDENTIFIER    

vturWanCommonTable 1.3.6.1.4.1.890.1.5.12.46.35.4.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturWanCommonEntry

vturWanCommonEntry 1.3.6.1.4.1.890.1.5.12.46.35.4.2.1.1
An entry in vturWanCommonTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturWanCommonEntry  

vturWanQoS 1.3.6.1.4.1.890.1.5.12.46.35.4.2.1.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

vturEnableAutoDefaultGateway 1.3.6.1.4.1.890.1.5.12.46.35.4.2.1.1.2
Display the enable auto default gateay setting we get from CPE side
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

vturDefaultGatewayIP 1.3.6.1.4.1.890.1.5.12.46.35.4.2.1.1.3
Display the default gateway setting we get from CPE side
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

vturVitualPortEnable 1.3.6.1.4.1.890.1.5.12.46.35.4.2.1.1.4
Display Enable/Disable virtual port on eth1 setting we get on CPE side
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

vturClassificationSetup 1.3.6.1.4.1.890.1.5.12.46.35.5
OBJECT IDENTIFIER    

vturClassificationTable 1.3.6.1.4.1.890.1.5.12.46.35.5.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturClassificationEntry

vturClassificationEntry 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1
An entry in vturClassificationTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturClassificationEntry  

vturClassificationIndex 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.1
Display the classification index range from 1 to 8 we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturClassificationRuleEnable 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.2
Display the classification enable/disable status we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

vturWanInterface 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.3
Display the wan interface index range from 1 to 4 we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vturClassificationQueue 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.4
Display the assigned queue (1-4)802.1p value we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vturClassification8021p 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.5
Mark 802.1p if 802.1q is enabled [0-7]
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vturClassificationVid 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.6
Display the 802.1Q VLAN ID: [1-4094]
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vturFilterPhysicalPort 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.7
Physical LAN Port number
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vturFilterProtocol 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.8
Protocol: [TCP/UDP, TCP, UDP, ICMP] 1-4
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tcp-udp(1), tcp(2), udp(3), icmp(4)  

vturFilterSourceIP 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.9
Display the filtering source IP we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vturFilterSourceSubnetMask 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.10
Display the filtering source subnet mask we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

vturFilterDestinationIP 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.11
Display the filtering destination IP we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

vturFilterDestinationSubnetMask 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.12
Display the filtering destination subnet mask we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

vturFilterSourcePortStart 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.13
Display the filtering source port start we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vturFilterSourcePortEnd 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.14
Display the filtering source port end we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vturFilterDestinationPortStart 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.15
Display the filtering destination port start we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vturFilterDestinationPortEnd 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.16
Display the filtering destination end port we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vturFilterSourceMACAddr 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.17
Display the filtering source MAC addr we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

vturFilterSourceMACMask 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.18
Display the filtering source MAC mask we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

vturFilterDestinationMACAddr 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.19
Display the filtering destination MAC addr we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

vturFilterDestinationMACMask 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.20
Display the filtering destination MAC mask we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

vturFilter8021p 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.21
Display the filtering 802.1p value we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vturFilterProtocolType 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.22
Display the filtering protocol type we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vturPolicyGatewayIP 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.23
Display the filtering protocol type we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

vturClassificationRowStatus 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.24
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vturClassificationBandwidth 1.3.6.1.4.1.890.1.5.12.46.35.5.1.1.25
Display limited bandwidth control(1-255 0:disable) we got in CPE side
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vturMiscSetup 1.3.6.1.4.1.890.1.5.12.46.35.6
OBJECT IDENTIFIER    

vturMntTable 1.3.6.1.4.1.890.1.5.12.46.35.6.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturMntEntry

vturMntEntry 1.3.6.1.4.1.890.1.5.12.46.35.6.1.1
An entry in VTUR Misc Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturMntEntry  

mntOperation 1.3.6.1.4.1.890.1.5.12.46.35.6.1.1.1
Specify the operation of VTUR
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER layer2Setup(1), portSetup(2), priorityQueueSetup(3), dot1qVlanSetup(4), portBasedVlanSetup(5), loadFactoryDefault(6), resetSW(7), apBasicSetup(8), apSecuritySetup(9), apRadiusSetup(10), apMacFilterSetup(11), apMacFilterAddrSetup(12), reinit(13), consoleSetup(14), remoteFunctionSetup(15), regetstatue(16), protocolBasedVlanSetup(17), vturWanSetup(18), vturClassificationSetup(19), vturLanSetup(20), vturResetCounter(21), loadDefaultWithoutIP(22)  

mntCommit 1.3.6.1.4.1.890.1.5.12.46.35.6.1.1.2
Apply maintenance setting to vtur
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER idle(0), commit(1)  

mntStatus 1.3.6.1.4.1.890.1.5.12.46.35.6.1.1.3
Display the current status regarding to the operation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER in-progress(0), success(1), fail(2)  

mntRefetchCPEInfo 1.3.6.1.4.1.890.1.5.12.46.35.6.1.1.4
Refetch current CPE information.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), refetching(1)  

vturAPSetup 1.3.6.1.4.1.890.1.5.12.46.35.7
OBJECT IDENTIFIER    

vturAPGeneral 1.3.6.1.4.1.890.1.5.12.46.35.7.1
OBJECT IDENTIFIER    

vturAPGeneralStatisticsTable 1.3.6.1.4.1.890.1.5.12.46.35.7.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturAPGeneralStatisticsEntry

vturAPGeneralStatisticsEntry 1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1
An entry in VTUR AP General Statistics Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturAPGeneralStatisticsEntry  

lanRxBytes 1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.1
Received bytes on LAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

lanRxPkts 1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.2
Received frames on LAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

lanTxBytes 1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.3
Transmitted bytes on LAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

lanTxPkts 1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.4
Transmitted frames on LAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vdslRxBytes 1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.5
Received bytes on VDSL
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vdslRxPkts 1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.6
Received frames on VDSL
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vdslTxBytes 1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.7
Transmitted bytes on VDSL
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vdslTxPkts 1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.8
Transmitted frames on VDSL
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlanRxBytes 1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.9
Received bytes on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlanRxPkts 1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.10
Received frames on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlanRxErrs 1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.11
Received error frames on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlanRxDrops 1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.12
Received drop frames on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlanTxBytes 1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.13
Transmitted bytes on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlanTxPkts 1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.14
Transmitted frames on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlanTxErrs 1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.15
Transmitted error frames on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

wlanTxDrops 1.3.6.1.4.1.890.1.5.12.46.35.7.1.1.1.16
Transmitted drop frames on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturAPWlan 1.3.6.1.4.1.890.1.5.12.46.35.7.2
OBJECT IDENTIFIER    

vturAPWlanBasicTable 1.3.6.1.4.1.890.1.5.12.46.35.7.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturAPWlanBasicEntry

vturAPWlanBasicEntry 1.3.6.1.4.1.890.1.5.12.46.35.7.2.1.1
An entry in VTUR AP Wlan Basic Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturAPWlanBasicEntry  

enable 1.3.6.1.4.1.890.1.5.12.46.35.7.2.1.1.1
0: disable wlan 1: enable wlan
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ssid 1.3.6.1.4.1.890.1.5.12.46.35.7.2.1.1.2
SSID of the AP
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

bssid 1.3.6.1.4.1.890.1.5.12.46.35.7.2.1.1.3
Mac address of AP
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

hidden 1.3.6.1.4.1.890.1.5.12.46.35.7.2.1.1.4
0: not hide AP's SSID 1: hide AP's SSID
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

channel 1.3.6.1.4.1.890.1.5.12.46.35.7.2.1.1.5
Channel number of the AP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

mode 1.3.6.1.4.1.890.1.5.12.46.35.7.2.1.1.6
1: B or G mix mode 2: Pure G mode 3: Pure B mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

txPower 1.3.6.1.4.1.890.1.5.12.46.35.7.2.1.1.7
Transmit power 1: 30 mW 2: 15 mW
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

multicastRate 1.3.6.1.4.1.890.1.5.12.46.35.7.2.1.1.8
Transmit rate of multicast packets. If the value not zero, transmit rate is value * 500kbps 0: auto 2, 4, 11, 22: Transmit rate = 1, 2, 5.5, 11 Mbps when mode = pure B mode 12, 18, 24, 36, 48, 96, 108: Transmit rate = 6, 9, 12, 18, 24, 36, 48, 54 Mbps when mode = pure G mode2, 4, 11, 12, 18, 22, 24, 36, 48, 96, 108: Transmit rate = 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps when mode = B or G mix mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vturAPWlanSecurityTable 1.3.6.1.4.1.890.1.5.12.46.35.7.2.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturAPWlanSecurityEntry

vturAPWlanSecurityEntry 1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1
An entry in VTUR AP Wlan Security Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturAPWlanSecurityEntry  

securityMode 1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.1
1: No security 2: Static WEP 3: WPA-PSK 4: WPA 5: WPA2 6: WPA2-PSK
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

wepEncryp 1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.2
This field is for SecurityMode = static WEP. 1: 64-Bit 2: 128-Bit
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

keyId 1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.3
This field is for SecurityMode = static WEP. It indicate which key will be used for encryption. If KeyId is equal to 1, AP will use Key1 to encrypt frame.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

key1 1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.4
This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key1 will be 10 heximal digits. If WEPEncryp is 128-Bit, key1 will be 26 heximal digits.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

key2 1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.5
This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key2 will be 10 heximal digits. If WEPEncryp is 128-Bit, key2 will be 26 heximal digits.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

key3 1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.6
This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key3 will be 10 heximal digits. If WEPEncryp is 128-Bit, key3 will be 26 heximal digits.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

key4 1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.7
This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key4 will be 10 heximal digits. If WEPEncryp is 128-Bit, key4 will be 26 heximal digits.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

psk 1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.8
This field is for SecurityMode = WPA-PSK or WPA2-PSK. It means Pre-Shared Key
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

wpaMix 1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.9
This field is for SecurityMode = WPA2 or WPA2-PSK. When WPAMix is enable on WPA2, stations with WPA2-AES or WPA-TKIP could connect to AP. When WPAMix is enable on WPA2-PSK, stations with WPA2-PSK-AES or WPA-PSK-TKIP could connect to AP. 0: disable 1: enable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

reAuthTime 1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.10
This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will trigger re-authentication with station every [ReAuthTime] seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

idleTime 1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.11
This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will flush stations information if there are no packets from station for [idleTime] seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

gtkTime 1.3.6.1.4.1.890.1.5.12.46.35.7.2.2.1.12
This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will trigger the update of group key with station every [GTKTime] seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vturAPWlanRadiusTable 1.3.6.1.4.1.890.1.5.12.46.35.7.2.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturAPWlanRadiusEntry

vturAPWlanRadiusEntry 1.3.6.1.4.1.890.1.5.12.46.35.7.2.3.1
An entry in VTUR AP Wlan Security Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturAPWlanRadiusEntry  

authServIP 1.3.6.1.4.1.890.1.5.12.46.35.7.2.3.1.1
This field is the IP address of authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

authServPort 1.3.6.1.4.1.890.1.5.12.46.35.7.2.3.1.2
This field is the port number of authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

authServSecret 1.3.6.1.4.1.890.1.5.12.46.35.7.2.3.1.3
This field is the shared secret of authentication server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

accServActive 1.3.6.1.4.1.890.1.5.12.46.35.7.2.3.1.4
This field is for activating or inactivating accounting server. 0: inactivate accounting server. 1: activate accounting server
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

accServIP 1.3.6.1.4.1.890.1.5.12.46.35.7.2.3.1.5
This field is the IP address of accounting server.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

accServPort 1.3.6.1.4.1.890.1.5.12.46.35.7.2.3.1.6
This field is the port number of accounting server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

accServSecret 1.3.6.1.4.1.890.1.5.12.46.35.7.2.3.1.7
This field is the shared secret of accounting server.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

vturAPWlanMacFilter 1.3.6.1.4.1.890.1.5.12.46.35.7.2.4
OBJECT IDENTIFIER    

vturAPWlanMacFilterTable 1.3.6.1.4.1.890.1.5.12.46.35.7.2.4.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturAPWlanMacFilterEntry

vturAPWlanMacFilterEntry 1.3.6.1.4.1.890.1.5.12.46.35.7.2.4.1.1
An entry in VTUR AP Wlan Mac Filter Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturAPWlanMacFilterEntry  

macFltActive 1.3.6.1.4.1.890.1.5.12.46.35.7.2.4.1.1.1
Activate or inactivate wlan MAC filter. 0: Inactive 1: Active
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

macFltAction 1.3.6.1.4.1.890.1.5.12.46.35.7.2.4.1.1.2
0: allow association for station which matches the address which is defined in MacFltAddr1~MacFltAddr8. 1: deny association for station which matches the address which is defined in MacFltAddr1~MacFltAddr8.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vturAPWlanMacFltAddrTable 1.3.6.1.4.1.890.1.5.12.46.35.7.2.4.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturAPWlanMacFltAddrEntry

vturAPWlanMacFltAddrEntry 1.3.6.1.4.1.890.1.5.12.46.35.7.2.4.2.1
An entry in VTUR AP Wlan Security Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturAPWlanMacFltAddrEntry  

fltStaIndex 1.3.6.1.4.1.890.1.5.12.46.35.7.2.4.2.1.1
The index for Mac filter
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

macFltAddr 1.3.6.1.4.1.890.1.5.12.46.35.7.2.4.2.1.2
The address for Mac filter
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

vturAPWlanStatisticsTable 1.3.6.1.4.1.890.1.5.12.46.35.7.2.5
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturAPWlanStatisticsEntry

vturAPWlanStatisticsEntry 1.3.6.1.4.1.890.1.5.12.46.35.7.2.5.1
An entry in VTUR AP Wlan Security Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturAPWlanStatisticsEntry  

inPkts 1.3.6.1.4.1.890.1.5.12.46.35.7.2.5.1.1
Same as WLANRxPkts in vturAPGeneral.vturAPGeneralStatistics MIB
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

inOctets 1.3.6.1.4.1.890.1.5.12.46.35.7.2.5.1.2
Same as WLANRxBytes in vturAPGeneral.vturAPGeneralStatistics MIB
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

inUCasts 1.3.6.1.4.1.890.1.5.12.46.35.7.2.5.1.3
Received unicast frames
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

inMCasts 1.3.6.1.4.1.890.1.5.12.46.35.7.2.5.1.4
Received multicast frames
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rxFCSErrors 1.3.6.1.4.1.890.1.5.12.46.35.7.2.5.1.5
Same as WLANRxErrs in vturAPGeneral.vturAPGeneralStatistics MIB
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

outPkts 1.3.6.1.4.1.890.1.5.12.46.35.7.2.5.1.6
Same as WLANTxPkts in vturAPGeneral.vturAPGeneralStatistics MIB
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

outOctets 1.3.6.1.4.1.890.1.5.12.46.35.7.2.5.1.7
Same as WLANTxBytes in vturAPGeneral.vturAPGeneralStatistics MIB
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

outUCasts 1.3.6.1.4.1.890.1.5.12.46.35.7.2.5.1.8
Transmitted unicast frames
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

outMCasts 1.3.6.1.4.1.890.1.5.12.46.35.7.2.5.1.9
Transmitted multicast frames
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturAPWlanStaListTable 1.3.6.1.4.1.890.1.5.12.46.35.7.2.6
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturAPWlanStaListEntry

vturAPWlanStaListEntry 1.3.6.1.4.1.890.1.5.12.46.35.7.2.6.1
An entry in VTUR AP Wlan Security Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturAPWlanStaListEntry  

staIndex 1.3.6.1.4.1.890.1.5.12.46.35.7.2.6.1.1
The index of associated WLAN STA. Max = 32, Min = 1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

staMacAddr 1.3.6.1.4.1.890.1.5.12.46.35.7.2.6.1.2
The address of associated WLAN STA
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

vturConsoleSetup 1.3.6.1.4.1.890.1.5.12.46.35.8
OBJECT IDENTIFIER    

vturConsoleTable 1.3.6.1.4.1.890.1.5.12.46.35.8.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturConsoleEntry

vturConsoleEntry 1.3.6.1.4.1.890.1.5.12.46.35.8.1.1
An entry in vturConsoleTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturConsoleEntry  

vturConsoleSet 1.3.6.1.4.1.890.1.5.12.46.35.8.1.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

vturConsoleAdminPassword 1.3.6.1.4.1.890.1.5.12.46.35.8.1.1.2
The operation for vtur device admin password
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

vturConsoleUserPassword 1.3.6.1.4.1.890.1.5.12.46.35.8.1.1.3
The operation for vtur device user password
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

vturRemoteFunctionSetup 1.3.6.1.4.1.890.1.5.12.46.35.9
OBJECT IDENTIFIER    

remoteFunctionTable 1.3.6.1.4.1.890.1.5.12.46.35.9.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RemoteFunctionEntry

remoteFunctionEntry 1.3.6.1.4.1.890.1.5.12.46.35.9.1.1
An entry in RemoteFunctionTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  RemoteFunctionEntry  

telnet 1.3.6.1.4.1.890.1.5.12.46.35.9.1.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable-all(1), disable-all(2), enable-lan-only(3), enable-wan-only(4)  

tftp 1.3.6.1.4.1.890.1.5.12.46.35.9.1.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable-all(1), disable-all(2), enable-lan-only(3), enable-wan-only(4)  

web 1.3.6.1.4.1.890.1.5.12.46.35.9.1.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable-all(1), disable-all(2), enable-lan-only(3), enable-wan-only(4)  

snmp 1.3.6.1.4.1.890.1.5.12.46.35.9.1.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable-all(1), disable-all(2), enable-lan-only(3), enable-wan-only(4)  

ssh 1.3.6.1.4.1.890.1.5.12.46.35.9.1.1.7
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable-all(1), disable-all(2), enable-lan-only(3), enable-wan-only(4)  

wireless 1.3.6.1.4.1.890.1.5.12.46.35.9.1.1.8
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

vturMacTableSetup 1.3.6.1.4.1.890.1.5.12.46.35.10
OBJECT IDENTIFIER    

vturMacTable 1.3.6.1.4.1.890.1.5.12.46.35.10.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturMacTableEntry

vturMacTableEntry 1.3.6.1.4.1.890.1.5.12.46.35.10.1.1
An entry in vturMacTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturMacTableEntry  

vturMacIndex 1.3.6.1.4.1.890.1.5.12.46.35.10.1.1.1
The index of associated vtur STA. Max = 32, Min = 1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturMacAddr 1.3.6.1.4.1.890.1.5.12.46.35.10.1.1.2
The address of associated vtur STA
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

vturLanSetup 1.3.6.1.4.1.890.1.5.12.46.35.11
OBJECT IDENTIFIER    

vturLanTable 20.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturLanEntry

vturLanEntry 20.1.1
An entry in vturLanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturLanEntry  

vturLanIP 20.1.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

vturLanSubnetmask 20.1.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

vturDHCPOption 20.1.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable-dhcp-server(1), enable-dhcp-server(2), dhcp-server-relay(3)  

vturDHCPServerStartIPAddr 20.1.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

vturDHCPServerEndIPAddr 20.1.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

vturDHCPServerSubnetmask 20.1.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

vturDHCPServerIPAddr 20.1.1.7
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

vturCFMSetup 1.3.6.1.4.1.890.1.5.12.46.35.12
OBJECT IDENTIFIER    

vturCFMTable 1.3.6.1.4.1.890.1.5.12.46.35.12.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturCFMEntry

vturCFMEntry 1.3.6.1.4.1.890.1.5.12.46.35.12.1.1
An entry in vturCFMTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturCFMEntry  

vturCFMCommit 1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.1
Set 1 to commit CFM operation and read value always return 0
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER commit(1)  

vturCFMMdName 1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

vturCFMMaName 1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

vturCFMVid 1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vturCFMMepId 1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  Dot1agCfmMepId  

vturCFMMdLevel 1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vturCFMAction 1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.7
Currently only support 0:save ,3:send loopback message and 5:load cpe cfm default
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER save(0), enable-cfm(1), disable-cfm(2), send-loopback-message(3), send-linktrace-message(4), reset-configuration(5)  

vturCFMDestMAC 1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.8
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

vturCFMLBMCount 1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.9
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vturCFMResultSentLBM 1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.10
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturCFMResultInorderLBM 1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.11
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturCFMResultOutorderLBM 1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.12
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturMACAddr 1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.13
CPE MAC address
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vturCFMReadStatus 1.3.6.1.4.1.890.1.5.12.46.35.12.1.1.14
Set 1 to commit CFM Read operation and read value always return 0
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER commit(1)  

vturInfo 1.3.6.1.4.1.890.1.5.12.46.37
OBJECT IDENTIFIER    

vturInfoTable 1.3.6.1.4.1.890.1.5.12.46.37.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturInfoEntry

vturInfoEntry 1.3.6.1.4.1.890.1.5.12.46.37.1.1
An entry in vturInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturInfoEntry  

vturName 1.3.6.1.4.1.890.1.5.12.46.37.1.1.1
Display remote device name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

vturSysVersion 1.3.6.1.4.1.890.1.5.12.46.37.1.1.2
Display remote device system version info
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

vturModemCodeVersion 1.3.6.1.4.1.890.1.5.12.46.37.1.1.3
Display remote device VDSL modem code version info
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

protoBasedVlanSetup 1.3.6.1.4.1.890.1.5.12.46.38
OBJECT IDENTIFIER    

protoBasedVlanTable 1.3.6.1.4.1.890.1.5.12.46.38.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ProtoBasedVlanEntry

protoBasedVlanEntry 1.3.6.1.4.1.890.1.5.12.46.38.1.1
An entry in protoBasedVlanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ProtoBasedVlanEntry  

protoBasedVlanPort 1.3.6.1.4.1.890.1.5.12.46.38.1.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

protoBasedVlanPacketType 1.3.6.1.4.1.890.1.5.12.46.38.1.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER etherII(1), snap(2), llc(3)  

protoBasedVlanEtherType 1.3.6.1.4.1.890.1.5.12.46.38.1.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

protoBasedVlanName 1.3.6.1.4.1.890.1.5.12.46.38.1.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

protoBasedVlanVid 1.3.6.1.4.1.890.1.5.12.46.38.1.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4094  

protoBasedVlanPriority 1.3.6.1.4.1.890.1.5.12.46.38.1.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

protoBasedVlanState 1.3.6.1.4.1.890.1.5.12.46.38.1.1.7
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

classifierSetup 1.3.6.1.4.1.890.1.5.12.46.39
OBJECT IDENTIFIER    

classifierRuleTable 1.3.6.1.4.1.890.1.5.12.46.39.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ClassifierRuleEntry

classifierRuleEntry 1.3.6.1.4.1.890.1.5.12.46.39.1.1
An entry in classifierRuleTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  ClassifierRuleEntry  

classifierName 1.3.6.1.4.1.890.1.5.12.46.39.1.1.1
Name of classifier rule.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

classifierEnable 1.3.6.1.4.1.890.1.5.12.46.39.1.1.2
Classifier rule enabled/disabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

classifierPacketFormat 1.3.6.1.4.1.890.1.5.12.46.39.1.1.3
Packet format for classifier rule. All(1), 802.3 untagged(2), 802.3 tagged(3), EthernetII untagged(4), EthernetII tagged(5).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER all(1), ethernetII-untagged(2), ethernetII-tagged(3), ethernet802-3-untagged(4), ethernet802-3-tagged(5)  

classifierVlanId 1.3.6.1.4.1.890.1.5.12.46.39.1.1.4
Vlan id for classifer rule, 1~4094.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

classifier8021pPriority 1.3.6.1.4.1.890.1.5.12.46.39.1.1.5
802.1p priority for classifier rule, 0~7.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

classifierEtherType 1.3.6.1.4.1.890.1.5.12.46.39.1.1.6
Ether type for classifier rule, in decimal expression.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

classifierSrcMAC 1.3.6.1.4.1.890.1.5.12.46.39.1.1.7
Source mac address for classifier rule
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

classifierIncomingPort 1.3.6.1.4.1.890.1.5.12.46.39.1.1.8
Incoming Port for classifier rule
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

classifierDstMAC 1.3.6.1.4.1.890.1.5.12.46.39.1.1.9
Destination mac address for classifier rule
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

classifierDSCP 1.3.6.1.4.1.890.1.5.12.46.39.1.1.10
DSCP for classifier rule
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

classifierIpProtocol 1.3.6.1.4.1.890.1.5.12.46.39.1.1.11
IP Protocol for classifier rule
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

classifierEstablishOnly 1.3.6.1.4.1.890.1.5.12.46.39.1.1.12
IP Protocol for EstablishOnly for classifier rule
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

classifierSrcIp 1.3.6.1.4.1.890.1.5.12.46.39.1.1.13
Source IP address for classifier rule
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

classifierSrcIpMask 1.3.6.1.4.1.890.1.5.12.46.39.1.1.14
Source IP Mask for classifier rule
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

classifierSrcSocket 1.3.6.1.4.1.890.1.5.12.46.39.1.1.15
Source Socket Number for classifier rule
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

classifierDstIp 1.3.6.1.4.1.890.1.5.12.46.39.1.1.16
Destination IP address for classifier rule
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

classifierDstIpMask 1.3.6.1.4.1.890.1.5.12.46.39.1.1.17
Destination IP Mask for classifier rule
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

classifierDstSocket 1.3.6.1.4.1.890.1.5.12.46.39.1.1.18
Destination Socket Number for classifier rule
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

classifierRowstatus 1.3.6.1.4.1.890.1.5.12.46.39.1.1.19
Row Status for classifier rule
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

classifierSrcIpv6 1.3.6.1.4.1.890.1.5.12.46.39.1.1.20
Source IPv6 address for classifier rule
Status: current Access: read-write
OBJECT-TYPE    
  Ipv6Address  

classifierSrcIpv6Mask 1.3.6.1.4.1.890.1.5.12.46.39.1.1.21
Source IPv6 Mask for classifier rule
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

classifierDstIpv6 1.3.6.1.4.1.890.1.5.12.46.39.1.1.22
Destination IPv6 address for classifier rule
Status: current Access: read-write
OBJECT-TYPE    
  Ipv6Address  

classifierDstIpv6Mask 1.3.6.1.4.1.890.1.5.12.46.39.1.1.23
Destination IPv6 Mask for classifier rule
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

classifierRuleSet 1.3.6.1.4.1.890.1.5.12.46.39.2
classifier Rule Set.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

policySetup 1.3.6.1.4.1.890.1.5.12.46.40
OBJECT IDENTIFIER    

policyTable 1.3.6.1.4.1.890.1.5.12.46.40.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PolicyEntry

policyEntry 1.3.6.1.4.1.890.1.5.12.46.40.1.1
An entry in policyTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PolicyEntry  

policyName 1.3.6.1.4.1.890.1.5.12.46.40.1.1.1
Name of policy rule.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

policyEnable 1.3.6.1.4.1.890.1.5.12.46.40.1.1.2
Policy rule enabled/disabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

policyClassifier 1.3.6.1.4.1.890.1.5.12.46.40.1.1.3
Classifier of policy rule.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

policyVlanId 1.3.6.1.4.1.890.1.5.12.46.40.1.1.4
Vlan id for policy rule, 1~4094.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

policyEgressPort 1.3.6.1.4.1.890.1.5.12.46.40.1.1.5
Egress Port for policy rule
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

policyOutPktFormat 1.3.6.1.4.1.890.1.5.12.46.40.1.1.6
Outgoing packet format for Egress port for policy rule
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tag(1), untag(2)  

policy8021pPriority 1.3.6.1.4.1.890.1.5.12.46.40.1.1.7
802.1p priority for policy rule, 0~7.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

policyDSCP 1.3.6.1.4.1.890.1.5.12.46.40.1.1.8
DSCP for policy rule.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

policyTOS 1.3.6.1.4.1.890.1.5.12.46.40.1.1.9
TOS for policy rule, 0~7
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

policyBandwidth 1.3.6.1.4.1.890.1.5.12.46.40.1.1.10
Bandwidth for policy rule
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

policyOutOfProfileDSCP 1.3.6.1.4.1.890.1.5.12.46.40.1.1.11
Out Of Profile DSCP for policy rule.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

policyForwardingAction 1.3.6.1.4.1.890.1.5.12.46.40.1.1.12
Forwarding Action for policy rule
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no-change(1), discard-the-packet(2), do-not-drop-the-matching-frame-previously-marked-for-dopping(3)  

policyPriorityAction 1.3.6.1.4.1.890.1.5.12.46.40.1.1.13
Priority Action for policy rule
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no-change(1), set-the-packets-802-1-priority(2), send-the-packet-to-priority-queue(3), replace-the-802-1-priority-field-with-the-IP-TOS-value(4)  

policyDiffServAction 1.3.6.1.4.1.890.1.5.12.46.40.1.1.14
DiffServ Action for policy rule
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no-change(1), set-the-packets-TOS-field(2), replace-the-IP-TOS-field-with-the-802-1-priority-value(3), set-the-Diffserv-Codepoint-field-in-the-frame(4)  

policyOutgoingAction 1.3.6.1.4.1.890.1.5.12.46.40.1.1.15
Outgoing Action for policy rule
Status: current Access: read-create
OBJECT-TYPE    
  BITS send-the-packet-to-the-mirror-port(1), send-the-packet-to-the-egress-port(2), send-the-matching-frames-to-the-egress-port(3), set-the-packets-VLAN-ID(4)  

policyMeteringEnable 1.3.6.1.4.1.890.1.5.12.46.40.1.1.16
Metering for Policy rule enabled/disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

policyOutOfProfileAction 1.3.6.1.4.1.890.1.5.12.46.40.1.1.17
Out Of Profile Action for policy rule
Status: current Access: read-create
OBJECT-TYPE    
  BITS drop-the-packet(1), change-the-DSCP-value(2), set-Out-Drop-Precedence(3), do-not-drop-the-matching-frame-previously-marked-for-dropping(4)  

policyRowstatus 1.3.6.1.4.1.890.1.5.12.46.40.1.1.18
Row Status for policy rule
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

policyRuleSet 1.3.6.1.4.1.890.1.5.12.46.40.2
policy Rule Set.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

switchCounterStatus 1.3.6.1.4.1.890.1.5.12.46.42
OBJECT IDENTIFIER    

vlanCounterTable 1.3.6.1.4.1.890.1.5.12.46.42.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanCounterEntry

vlanCounterEntry 1.3.6.1.4.1.890.1.5.12.46.42.1.1
An entry in vlanCounterTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanCounterEntry  

vlanCounterTxPkts 1.3.6.1.4.1.890.1.5.12.46.42.1.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vlanCounterRxPkts 1.3.6.1.4.1.890.1.5.12.46.42.1.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

switchCounterTable 1.3.6.1.4.1.890.1.5.12.46.42.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SwitchCounterEntry

switchCounterEntry 1.3.6.1.4.1.890.1.5.12.46.42.2.1
An entry in switchCounterTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SwitchCounterEntry  

switchUnknownUnicastCounter 1.3.6.1.4.1.890.1.5.12.46.42.2.1.1
Unknown unicast counter for the port.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

switchtxratelimitdropcounter 1.3.6.1.4.1.890.1.5.12.46.42.2.1.2
Rx Ratelimit drop counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

switchrxratelimitdropcounter 1.3.6.1.4.1.890.1.5.12.46.42.2.1.3
Tx Ratelimit drop counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

switchrxmeterdropcounter 1.3.6.1.4.1.890.1.5.12.46.42.2.1.4
Rx Metering drop counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

vlanCounterResetTable 1.3.6.1.4.1.890.1.5.12.46.42.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanCounterResetEntry

vlanCounterResetEntry 1.3.6.1.4.1.890.1.5.12.46.42.3.1
An entry in vlanCounterTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanCounterResetEntry  

vlanCounterReset 1.3.6.1.4.1.890.1.5.12.46.42.3.1.1
Clear VLAN counters.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

vlanCounterSwitchSetup 1.3.6.1.4.1.890.1.5.12.46.42.4
OBJECT IDENTIFIER    

vlanCounterSwitch 1.3.6.1.4.1.890.1.5.12.46.42.4.1
Switch VLAN counters on/off.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

vlanCounterVlan 1.3.6.1.4.1.890.1.5.12.46.42.4.2
VLAN counter per vlan.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vlanCounterPort 1.3.6.1.4.1.890.1.5.12.46.42.4.3
VLAN counters per port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vlanCounterDirection 1.3.6.1.4.1.890.1.5.12.46.42.4.4
VLAN counters per direction.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tx(1), rx(2)  

rateLimitProfilePortSetup 1.3.6.1.4.1.890.1.5.12.46.43
OBJECT IDENTIFIER    

rateLimitProfilePortTable 1.3.6.1.4.1.890.1.5.12.46.43.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RateLimitProfilePortEntry

rateLimitProfilePortEntry 1.3.6.1.4.1.890.1.5.12.46.43.1.1
An entry in rateLimitProfilePortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  RateLimitProfilePortEntry  

rateLimitPortProfile 1.3.6.1.4.1.890.1.5.12.46.43.1.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

perQueueProfilePortTable 1.3.6.1.4.1.890.1.5.12.46.43.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PerQueueProfilePortEntry

perQueueProfilePortEntry 1.3.6.1.4.1.890.1.5.12.46.43.2.1
An entry in perQueueProfilePortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PerQueueProfilePortEntry  

perQueuePortProfile 1.3.6.1.4.1.890.1.5.12.46.43.2.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

rateLimitProfileSetup 1.3.6.1.4.1.890.1.5.12.46.44
OBJECT IDENTIFIER    

rateLimitMaxNumberOfProfile 1.3.6.1.4.1.890.1.5.12.46.44.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

rateLimitProfileTable 1.3.6.1.4.1.890.1.5.12.46.44.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RateLimitProfileEntry

rateLimitProfileEntry 1.3.6.1.4.1.890.1.5.12.46.44.2.1
An entry in rateLimitMaxNumberOfProfile.
Status: current Access: not-accessible
OBJECT-TYPE    
  RateLimitProfileEntry  

rateLimitProfileName 1.3.6.1.4.1.890.1.5.12.46.44.2.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

rateLimitProfilePeakRate 1.3.6.1.4.1.890.1.5.12.46.44.2.1.2
Peak rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

rateLimitProfileEgrRate 1.3.6.1.4.1.890.1.5.12.46.44.2.1.3
Egress rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

rateLimitProfileCommitRate 1.3.6.1.4.1.890.1.5.12.46.44.2.1.4
Commit rate in Kbit/s. The range of FE port is between 0 and 100,000. For GE port, the range is between 0 and 1000,000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

rateLimitProfilePeakState 1.3.6.1.4.1.890.1.5.12.46.44.2.1.5
Ingress peak rate limiting enabled/disabled on the port.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

rateLimitProfileEgrState 1.3.6.1.4.1.890.1.5.12.46.44.2.1.6
Egress rate limiting enabled/disabled on the port.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

rateLimitProfileCommitState 1.3.6.1.4.1.890.1.5.12.46.44.2.1.7
Ingress commit rate limiting enabled/disabled on the port.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

rateLimitProfileRowStatus 1.3.6.1.4.1.890.1.5.12.46.44.2.1.8
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

perQueueMaxNumberOfProfile 1.3.6.1.4.1.890.1.5.12.46.44.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

perQueueProfileTable 1.3.6.1.4.1.890.1.5.12.46.44.4
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PerQueueProfileEntry

perQueueProfileEntry 1.3.6.1.4.1.890.1.5.12.46.44.4.1
An entry in perQueueMaxNumberOfProfile.
Status: current Access: not-accessible
OBJECT-TYPE    
  PerQueueProfileEntry  

perQueueProfileName 1.3.6.1.4.1.890.1.5.12.46.44.4.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

perQueueProfileQ0CIR 1.3.6.1.4.1.890.1.5.12.46.44.4.1.2
Commit rate of Queue0 in Kbit/s. The range is between 0 and 1000,000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

perQueueProfileQ0PIR 1.3.6.1.4.1.890.1.5.12.46.44.4.1.3
Peak rate of Queue0 in Kbit/s. The range is between 0 and 1000,000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

perQueueProfileQ1CIR 1.3.6.1.4.1.890.1.5.12.46.44.4.1.4
Commit rate of Queue1 in Kbit/s. The range is between 0 and 1000,000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

perQueueProfileQ1PIR 1.3.6.1.4.1.890.1.5.12.46.44.4.1.5
Peak rate of Queue1 in Kbit/s. The range is between 0 and 1000,000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

perQueueProfileQ2CIR 1.3.6.1.4.1.890.1.5.12.46.44.4.1.6
Commit rate of Queue2 in Kbit/s. The range is between 0 and 1000,000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

perQueueProfileQ2PIR 1.3.6.1.4.1.890.1.5.12.46.44.4.1.7
Peak rate of Queue2 in Kbit/s. The range is between 0 and 1000,000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

perQueueProfileQ3CIR 1.3.6.1.4.1.890.1.5.12.46.44.4.1.8
Commit rate of Queue3 in Kbit/s. The range is between 0 and 1000,000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

perQueueProfileQ3PIR 1.3.6.1.4.1.890.1.5.12.46.44.4.1.9
Peak rate of Queue3 in Kbit/s. The range is between 0 and 1000,000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

perQueueProfileQ4CIR 1.3.6.1.4.1.890.1.5.12.46.44.4.1.10
Commit rate of Queue4 in Kbit/s. The range is between 0 and 1000,000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

perQueueProfileQ4PIR 1.3.6.1.4.1.890.1.5.12.46.44.4.1.11
Peak rate of Queue4 in Kbit/s. The range is between 0 and 1000,000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

perQueueProfileQ5CIR 1.3.6.1.4.1.890.1.5.12.46.44.4.1.12
Commit rate of Queue5 in Kbit/s. The range is between 0 and 1000,000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

perQueueProfileQ5PIR 1.3.6.1.4.1.890.1.5.12.46.44.4.1.13
Peak rate of Queue5 in Kbit/s. The range is between 0 and 1000,000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

perQueueProfileQ6CIR 1.3.6.1.4.1.890.1.5.12.46.44.4.1.14
Commit rate of Queue6 in Kbit/s. The range is between 0 and 1000,000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

perQueueProfileQ6PIR 1.3.6.1.4.1.890.1.5.12.46.44.4.1.15
Peak rate of Queue6 in Kbit/s. The range is between 0 and 1000,000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

perQueueProfileQ7CIR 1.3.6.1.4.1.890.1.5.12.46.44.4.1.16
Commit rate of Queue7 in Kbit/s. The range is between 0 and 1000,000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

perQueueProfileQ7PIR 1.3.6.1.4.1.890.1.5.12.46.44.4.1.17
Peak rate of Queue7 in Kbit/s. The range is between 0 and 1000,000.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

perQueueProfileRowStatus 1.3.6.1.4.1.890.1.5.12.46.44.4.1.18
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vlanSecuritySetup 1.3.6.1.4.1.890.1.5.12.46.45
OBJECT IDENTIFIER    

vlanSecurityTable 1.3.6.1.4.1.890.1.5.12.46.45.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanSecurityEntry

vlanSecurityEntry 1.3.6.1.4.1.890.1.5.12.46.45.1.1
An entry in vlanSecurityTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanSecurityEntry  

vlanSecurityCount 1.3.6.1.4.1.890.1.5.12.46.45.1.1.1
Number of (dynamic) MAC addresses that may be learned on the VID.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

cfmSetup 1.3.6.1.4.1.890.1.5.12.46.46
OBJECT IDENTIFIER    

cfmLoopbackPortTable 1.3.6.1.4.1.890.1.5.12.46.46.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CfmLoopbackPortEntry

cfmLoopbackPortEntry 1.3.6.1.4.1.890.1.5.12.46.46.1.1
An entry in cfmLoopbackPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CfmLoopbackPortEntry  

cfmLoopbackPortState 1.3.6.1.4.1.890.1.5.12.46.46.1.1.1
CFM loopback enabled/disabled on the port.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

cfmMIPTable 1.3.6.1.4.1.890.1.5.12.46.46.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CfmMIPEntry

cfmMIPEntry 1.3.6.1.4.1.890.1.5.12.46.46.2.1
An entry in cfmMIPTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CfmMIPEntry  

cfmPort 1.3.6.1.4.1.890.1.5.12.46.46.2.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

cfmVlanID 1.3.6.1.4.1.890.1.5.12.46.46.2.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

cfmLevel 1.3.6.1.4.1.890.1.5.12.46.46.2.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

cfmMIPRowStatus 1.3.6.1.4.1.890.1.5.12.46.46.2.1.4
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cfmActionEnableStatus 1.3.6.1.4.1.890.1.5.12.46.46.3
CFM Action enable status for the CO device
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

mrstp 1.3.6.1.4.1.890.1.5.12.46.48
OBJECT IDENTIFIER    

mrstpSetup 2.1
OBJECT IDENTIFIER    

mrstpBridgeTable 2.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MrstpBridgeEntry

mrstpBridgeEntry 2.1.1.1
An entry in mrstpBridgeTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MrstpBridgeEntry  

mrstpBridgeIndex 2.1.1.1.1
The tree index of the MRSTP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mrstpState 2.1.1.1.2
Enabled/disabled on the mrstp bridge.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

mrstpProtocolSpecification 2.1.1.1.3
An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), decLb100(2), ieee8021d(3)  

mrstpPriority 2.1.1.1.4
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

mrstpTimeSinceTopologyChange 2.1.1.1.5
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

mrstpTopChanges 2.1.1.1.6
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mrstpDesignatedRoot 2.1.1.1.7
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

mrstpRootCost 2.1.1.1.8
The cost of the path to the root as seen from this bridge.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mrstpRootPort 2.1.1.1.9
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mrstpMaxAge 2.1.1.1.10
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: current Access: read-only
OBJECT-TYPE    
  Timeout  

mrstpHelloTime 2.1.1.1.11
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
Status: current Access: read-only
OBJECT-TYPE    
  Timeout  

mrstpHoldTime 2.1.1.1.12
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mrstpForwardDelay 2.1.1.1.13
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to mrstpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
Status: current Access: read-only
OBJECT-TYPE    
  Timeout  

mrstpBridgeMaxAge 2.1.1.1.14
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mrstpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Timeout 600..4000  

mrstpBridgeHelloTime 2.1.1.1.15
The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Timeout 100..1000  

mrstpBridgeForwardDelay 2.1.1.1.16
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mrstpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Status: current Access: read-write
OBJECT-TYPE    
  Timeout 400..3000  

mrstpPortTable 2.1.2
A table that contains port-specific information for the Spanning Tree Protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MrstpPortEntry

mrstpPortEntry 2.1.2.1
A list of information maintained by every port about the Spanning Tree Protocol state for that port.
Status: current Access: not-accessible
OBJECT-TYPE    
  MrstpPortEntry  

mrstpPort 2.1.2.1.1
The port number of the port for which this entry contains Spanning Tree Protocol management information.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

mrstpPortPriority 2.1.2.1.2
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of mrstpPort.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

mrstpPortState 2.1.2.1.3
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see mrstpPortEnable), this object will have a value of disabled(1).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), blocking(2), listening(3), learning(4), forwarding(5), broken(6)  

mrstpPortEnable 2.1.2.1.4
The enabled/disabled status of the port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

mrstpPortPathCost 2.1.2.1.5
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

mrstpPortDesignatedRoot 2.1.2.1.6
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

mrstpPortDesignatedCost 2.1.2.1.7
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mrstpPortDesignatedBridge 2.1.2.1.8
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

mrstpPortDesignatedPort 2.1.2.1.9
The Port Identifier of the port on the Designated Bridge for this port's segment.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(2)  

mrstpPortForwardTransitions 2.1.2.1.10
The number of times this port has transitioned from the Learning state to the Forwarding state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mrstpPortOnBridgeIndex 2.1.2.1.11
Indetify the bridge index that this port joined to in MRSTP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

mrstpNotifications 2.2
OBJECT IDENTIFIER    

newRoot 2.2.1
Tok_String
Status: current Access: read-write
NOTIFICATION-TYPE    

topologyChange 2.2.2
Tok_String
Status: current Access: read-write
NOTIFICATION-TYPE    

dhcpSnp 1.3.6.1.4.1.890.1.5.12.46.49
OBJECT IDENTIFIER    

dhcpSnpVlanTable 1.3.6.1.4.1.890.1.5.12.46.49.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpSnpVlanEntry

dhcpSnpVlanEntry 1.3.6.1.4.1.890.1.5.12.46.49.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  DhcpSnpVlanEntry  

dhcpSnpVlanEntryVid 1.3.6.1.4.1.890.1.5.12.46.49.1.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

dhcpSnpVlanEntryEnable 1.3.6.1.4.1.890.1.5.12.46.49.1.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

dhcpSnpVlanEntryOption82Enable 1.3.6.1.4.1.890.1.5.12.46.49.1.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

dhcpSnpVlanEntryInfo 1.3.6.1.4.1.890.1.5.12.46.49.1.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

dhcpSnpVlanEntryRemoteID 1.3.6.1.4.1.890.1.5.12.46.49.1.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

dhcpSnpPortTable 1.3.6.1.4.1.890.1.5.12.46.49.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpSnpPortEntry

dhcpSnpPortEntry 1.3.6.1.4.1.890.1.5.12.46.49.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  DhcpSnpPortEntry  

dhcpSnpPortEntryPort 1.3.6.1.4.1.890.1.5.12.46.49.2.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpPortEntryTrust 1.3.6.1.4.1.890.1.5.12.46.49.2.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

dhcpSnpPortEntryRate 1.3.6.1.4.1.890.1.5.12.46.49.2.1.3
0 means unlimited
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2048  

dhcpSnpBindTable 1.3.6.1.4.1.890.1.5.12.46.49.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpSnpBindEntry

dhcpSnpBindEntry 1.3.6.1.4.1.890.1.5.12.46.49.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  DhcpSnpBindEntry  

dhcpSnpBindEntryMac 1.3.6.1.4.1.890.1.5.12.46.49.3.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

dhcpSnpBindEntryVid 1.3.6.1.4.1.890.1.5.12.46.49.3.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpBindEntryIP 1.3.6.1.4.1.890.1.5.12.46.49.3.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

dhcpSnpBindEntryLease 1.3.6.1.4.1.890.1.5.12.46.49.3.1.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpBindEntryType 1.3.6.1.4.1.890.1.5.12.46.49.3.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER dynamic(2)  

dhcpSnpBindEntryPort 1.3.6.1.4.1.890.1.5.12.46.49.3.1.6
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpEnable 1.3.6.1.4.1.890.1.5.12.46.49.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

dhcpSnpDb 1.3.6.1.4.1.890.1.5.12.46.49.5
OBJECT IDENTIFIER    

dhcpSnpDbAbort 1.3.6.1.4.1.890.1.5.12.46.49.5.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

dhcpSnpDbWriteDelay 1.3.6.1.4.1.890.1.5.12.46.49.5.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

dhcpSnpDbUrl 1.3.6.1.4.1.890.1.5.12.46.49.5.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

dhcpSnpDbUrlRenew 1.3.6.1.4.1.890.1.5.12.46.49.5.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

dhcpSnpDbStat 1.3.6.1.4.1.890.1.5.12.46.49.5.5
OBJECT IDENTIFIER    

dhcpSnpDbStatClear 1.3.6.1.4.1.890.1.5.12.46.49.5.5.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

dhcpSnpDbStatAgentRunning 1.3.6.1.4.1.890.1.5.12.46.49.5.5.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), read(1), write(2)  

dhcpSnpDbStatDelayExpiry 1.3.6.1.4.1.890.1.5.12.46.49.5.5.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpDbStatAbortExpiry 1.3.6.1.4.1.890.1.5.12.46.49.5.5.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpDbStatLastSuccTime 1.3.6.1.4.1.890.1.5.12.46.49.5.5.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

dhcpSnpDbStatLastFailTime 1.3.6.1.4.1.890.1.5.12.46.49.5.5.6
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

dhcpSnpDbStatLastFailReason 1.3.6.1.4.1.890.1.5.12.46.49.5.5.7
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

dhcpSnpDbStatTotalAttempt 1.3.6.1.4.1.890.1.5.12.46.49.5.5.8
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpDbStatStartupFail 1.3.6.1.4.1.890.1.5.12.46.49.5.5.9
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpDbStatSuccTrans 1.3.6.1.4.1.890.1.5.12.46.49.5.5.10
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpDbStatFailTrans 1.3.6.1.4.1.890.1.5.12.46.49.5.5.11
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpDbStatSuccRead 1.3.6.1.4.1.890.1.5.12.46.49.5.5.12
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpDbStatFailRead 1.3.6.1.4.1.890.1.5.12.46.49.5.5.13
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpDbStatSuccWrite 1.3.6.1.4.1.890.1.5.12.46.49.5.5.14
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpDbStatFailWrite 1.3.6.1.4.1.890.1.5.12.46.49.5.5.15
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpDbStatFirstSuccAccess 1.3.6.1.4.1.890.1.5.12.46.49.5.5.16
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), read(1), write(2)  

dhcpSnpDbStatLastIgnoreBindCol 1.3.6.1.4.1.890.1.5.12.46.49.5.5.17
Last ignored: binding collision
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpDbStatLastIgnoreExpireLease 1.3.6.1.4.1.890.1.5.12.46.49.5.5.18
Last ignored: expired leases
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpDbStatLastIgnoreInvalidIntf 1.3.6.1.4.1.890.1.5.12.46.49.5.5.19
Last ignored: invalid interface
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpDbStatLastIgnoreUnsuppVlan 1.3.6.1.4.1.890.1.5.12.46.49.5.5.20
Last ignored: unsupported vlans
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpDbStatLastIgnoreParse 1.3.6.1.4.1.890.1.5.12.46.49.5.5.21
Last ignored: parsing error
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpDbStatTotalIgnoreBindCol 1.3.6.1.4.1.890.1.5.12.46.49.5.5.22
Total ignored: binding collision
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpDbStatTotalIgnoreExpireLease 1.3.6.1.4.1.890.1.5.12.46.49.5.5.23
Total ignored: expired leases
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpDbStatTotalIgnoreInvalidIntf 1.3.6.1.4.1.890.1.5.12.46.49.5.5.24
Total ignored: invalid interface
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpDbStatTotalIgnoreUnsuppVlan 1.3.6.1.4.1.890.1.5.12.46.49.5.5.25
Total ignored: unsupported vlans
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpDbStatTotalIgnoreParse 1.3.6.1.4.1.890.1.5.12.46.49.5.5.26
Total ignored: parsing error
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

dhcpSnpDbStatFirstSuccessAccess 1.3.6.1.4.1.890.1.5.12.46.49.5.5.27
First Success Access
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), read(1), write(2)  

dhcpSnpDhcpVlan 1.3.6.1.4.1.890.1.5.12.46.49.6
OBJECT IDENTIFIER    

dhcpSnpDhcpVlanVid 1.3.6.1.4.1.890.1.5.12.46.49.6.1
0: disable DHCP VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4094  

ipsg 1.3.6.1.4.1.890.1.5.12.46.50
OBJECT IDENTIFIER    

ipsgTable 1.3.6.1.4.1.890.1.5.12.46.50.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    IpsgEntry

ipsgEntry 1.3.6.1.4.1.890.1.5.12.46.50.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  IpsgEntry  

ipsgEntryMac 1.3.6.1.4.1.890.1.5.12.46.50.1.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

ipsgEntryVid 1.3.6.1.4.1.890.1.5.12.46.50.1.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

ipsgEntryIp 1.3.6.1.4.1.890.1.5.12.46.50.1.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipsgEntryLease 1.3.6.1.4.1.890.1.5.12.46.50.1.1.4
second
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipsgEntryType 1.3.6.1.4.1.890.1.5.12.46.50.1.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER static(1), dhcp(2)  

ipsgEntryPort 1.3.6.1.4.1.890.1.5.12.46.50.1.1.6
0 means any port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ipsgEntryState 1.3.6.1.4.1.890.1.5.12.46.50.1.1.7
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

arpInspect 1.3.6.1.4.1.890.1.5.12.46.51
OBJECT IDENTIFIER    

arpInspectSetup 1.3.6.1.4.1.890.1.5.12.46.51.1
OBJECT IDENTIFIER    

arpInspectState 1.3.6.1.4.1.890.1.5.12.46.51.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

arpInspectFilterAgingTime 1.3.6.1.4.1.890.1.5.12.46.51.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

arpInspectLog 1.3.6.1.4.1.890.1.5.12.46.51.1.3
OBJECT IDENTIFIER    

arpInspectLogEntries 1.3.6.1.4.1.890.1.5.12.46.51.1.3.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1024  

arpInspectLogRate 1.3.6.1.4.1.890.1.5.12.46.51.1.3.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1024  

arpInspectLogInterval 1.3.6.1.4.1.890.1.5.12.46.51.1.3.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

arpInspectVlanTable 1.3.6.1.4.1.890.1.5.12.46.51.1.4
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArpInspectVlanEntry

arpInspectVlanEntry 1.3.6.1.4.1.890.1.5.12.46.51.1.4.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  ArpInspectVlanEntry  

arpInspectVlanVid 1.3.6.1.4.1.890.1.5.12.46.51.1.4.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

arpInspectVlanLog 1.3.6.1.4.1.890.1.5.12.46.51.1.4.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER all(1), none(2), permit(3), deny(4)  

arpInspectVlanStatus 1.3.6.1.4.1.890.1.5.12.46.51.1.4.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

arpInspectPortTable 1.3.6.1.4.1.890.1.5.12.46.51.1.5
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArpInspectPortEntry

arpInspectPortEntry 1.3.6.1.4.1.890.1.5.12.46.51.1.5.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  ArpInspectPortEntry  

arpInspectPortIndex 1.3.6.1.4.1.890.1.5.12.46.51.1.5.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

arpInspectPortTrust 1.3.6.1.4.1.890.1.5.12.46.51.1.5.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER trusted(1), untrusted(2)  

arpInspectPortRate 1.3.6.1.4.1.890.1.5.12.46.51.1.5.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2048  

arpInspectPortInterval 1.3.6.1.4.1.890.1.5.12.46.51.1.5.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..15  

arpInspectStatus 1.3.6.1.4.1.890.1.5.12.46.51.2
OBJECT IDENTIFIER    

arpInspectFilterClear 1.3.6.1.4.1.890.1.5.12.46.51.2.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

arpInspectLogClear 1.3.6.1.4.1.890.1.5.12.46.51.2.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

arpInspectFilterTable 1.3.6.1.4.1.890.1.5.12.46.51.2.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArpInspectFilterEntry

arpInspectFilterEntry 1.3.6.1.4.1.890.1.5.12.46.51.2.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  ArpInspectFilterEntry  

arpInspectFilterMac 1.3.6.1.4.1.890.1.5.12.46.51.2.3.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

arpInspectFilterVid 1.3.6.1.4.1.890.1.5.12.46.51.2.3.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

arpInspectFilterPort 1.3.6.1.4.1.890.1.5.12.46.51.2.3.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

arpInspectFilterExpiry 1.3.6.1.4.1.890.1.5.12.46.51.2.3.1.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

arpInspectFilterReason 1.3.6.1.4.1.890.1.5.12.46.51.2.3.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER macVid(1), port(2), ip(3)  

arpInspectFilterRowStatus 1.3.6.1.4.1.890.1.5.12.46.51.2.3.1.6
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

arpInspectLogTable 1.3.6.1.4.1.890.1.5.12.46.51.2.4
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArpInspectLogEntry

arpInspectLogEntry 1.3.6.1.4.1.890.1.5.12.46.51.2.4.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  ArpInspectLogEntry  

arpInspectLogMac 1.3.6.1.4.1.890.1.5.12.46.51.2.4.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

arpInspectLogVid 1.3.6.1.4.1.890.1.5.12.46.51.2.4.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4094  

arpInspectLogPort 1.3.6.1.4.1.890.1.5.12.46.51.2.4.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

arpInspectLogIp 1.3.6.1.4.1.890.1.5.12.46.51.2.4.1.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

arpInspectLogNumPkt 1.3.6.1.4.1.890.1.5.12.46.51.2.4.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

arpInspectLogReason 1.3.6.1.4.1.890.1.5.12.46.51.2.4.1.6
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER deny(1), denyStatic(2), denyDHCP(3), permitStatic(4), permitDHCP(5)  

arpInspectLogTime 1.3.6.1.4.1.890.1.5.12.46.51.2.4.1.7
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

arpInspectStatisticsTable 1.3.6.1.4.1.890.1.5.12.46.51.2.5
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ArpInspectStatisticsEntry

arpInspectStatisticsEntry 1.3.6.1.4.1.890.1.5.12.46.51.2.5.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  ArpInspectStatisticsEntry  

arpInspectStatisticsVid 1.3.6.1.4.1.890.1.5.12.46.51.2.5.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

arpInspectStatisticsReceived 1.3.6.1.4.1.890.1.5.12.46.51.2.5.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

arpInspectStatisticsRequest 1.3.6.1.4.1.890.1.5.12.46.51.2.5.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

arpInspectStatisticsReply 1.3.6.1.4.1.890.1.5.12.46.51.2.5.1.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

arpInspectStatisticsForward 1.3.6.1.4.1.890.1.5.12.46.51.2.5.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

arpInspectStatisticsDrop 1.3.6.1.4.1.890.1.5.12.46.51.2.5.1.6
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

arpInspectStatisticsClear 1.3.6.1.4.1.890.1.5.12.46.51.2.5.1.7
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

trTCMSetup 1.3.6.1.4.1.890.1.5.12.46.52
OBJECT IDENTIFIER    

trTCMState 1.3.6.1.4.1.890.1.5.12.46.52.1
Two-rate three color marker enabled/disabled for the switch.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

trTCMMode 1.3.6.1.4.1.890.1.5.12.46.52.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER color-aware(0), color-blind(1)  

trTCMPortTable 1.3.6.1.4.1.890.1.5.12.46.52.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrTCMPortEntry

trTCMPortEntry 1.3.6.1.4.1.890.1.5.12.46.52.3.1
An entry in trTCMPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  TrTCMPortEntry  

trTCMPortState 1.3.6.1.4.1.890.1.5.12.46.52.3.1.1
Two-rate three color marker enabled/disabled on the port.
Status: current Access: read-create
OBJECT-TYPE    
  EnabledStatus  

trTCMPortCIR 1.3.6.1.4.1.890.1.5.12.46.52.3.1.2
Allowed CIR in pkts/s.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

trTCMPortPIR 1.3.6.1.4.1.890.1.5.12.46.52.3.1.3
Allowed PIR in pkts/s.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

trTCMPortDscpGreen 1.3.6.1.4.1.890.1.5.12.46.52.3.1.4
0-63
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

trTCMPortDscpYellow 1.3.6.1.4.1.890.1.5.12.46.52.3.1.5
0-63
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

trTCMPortDscpRed 1.3.6.1.4.1.890.1.5.12.46.52.3.1.6
0-63
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

loopGuardSetup 1.3.6.1.4.1.890.1.5.12.46.53
OBJECT IDENTIFIER    

loopGuardState 1.3.6.1.4.1.890.1.5.12.46.53.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

loopGuardPortTable 1.3.6.1.4.1.890.1.5.12.46.53.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LoopGuardPortEntry

loopGuardPortEntry 1.3.6.1.4.1.890.1.5.12.46.53.2.1
An entry in loopGuardPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  LoopGuardPortEntry  

loopGuardPortState 1.3.6.1.4.1.890.1.5.12.46.53.2.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

loopGuardPortMode 1.3.6.1.4.1.890.1.5.12.46.53.2.1.2
Specify loopguard mode for each port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER fix(1), dynamic(2)  

loopGuardPortRecoverTime 1.3.6.1.4.1.890.1.5.12.46.53.2.1.3
recover time to activate port in seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

loopGuardStatusTable 1.3.6.1.4.1.890.1.5.12.46.53.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LoopGuardStatusEntry

loopGuardStatusEntry 1.3.6.1.4.1.890.1.5.12.46.53.3.1
An entry in loopGuardStatusTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  LoopGuardStatusEntry  

loopGuardStatusTxPkts 1.3.6.1.4.1.890.1.5.12.46.53.3.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

loopGuardStatusRxPkts 1.3.6.1.4.1.890.1.5.12.46.53.3.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

loopGuardStatusBadPkts 1.3.6.1.4.1.890.1.5.12.46.53.3.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

loopGuardStatusShutdownTime 1.3.6.1.4.1.890.1.5.12.46.53.3.1.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

subnetBasedVlanSetup 1.3.6.1.4.1.890.1.5.12.46.54
OBJECT IDENTIFIER    

subnetBasedVlanState 1.3.6.1.4.1.890.1.5.12.46.54.1
subnet-based vlan feature enabled/disabled for the switch.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

dhcpVlanOverrideState 1.3.6.1.4.1.890.1.5.12.46.54.2
dhcp vlan override enabled/disabled when subnet-based vlan is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

subnetBasedVlanTable 1.3.6.1.4.1.890.1.5.12.46.54.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SubnetBasedVlanEntry

subnetBasedVlanEntry 1.3.6.1.4.1.890.1.5.12.46.54.3.1
An entry in subnetBasedVlanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SubnetBasedVlanEntry  

subnetBasedVlanSrcIp 1.3.6.1.4.1.890.1.5.12.46.54.3.1.1
source ip for subnet-based vlan entry
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

subnetBasedVlanSrcMaskBit 1.3.6.1.4.1.890.1.5.12.46.54.3.1.2
source ip mask-bits for subnet-based vlan entry
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

subnetBasedVlanName 1.3.6.1.4.1.890.1.5.12.46.54.3.1.3
name for subnet-based vlan entry
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

subnetBasedVlanVid 1.3.6.1.4.1.890.1.5.12.46.54.3.1.4
vid for subnet-based vlan entry
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4094  

subnetBasedVlanPriority 1.3.6.1.4.1.890.1.5.12.46.54.3.1.5
priority for subnet-based vlan entry
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

subnetBasedVlanEntryState 1.3.6.1.4.1.890.1.5.12.46.54.3.1.6
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

subnetBasedVlanInfoTable 1.3.6.1.4.1.890.1.5.12.46.54.4
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SubnetBasedVlanInfoEntry

subnetBasedVlanInfoEntry 1.3.6.1.4.1.890.1.5.12.46.54.4.1
An entry in subnetBasedVlanInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SubnetBasedVlanInfoEntry  

subnetBasedVlanInfoSrcIpType 1.3.6.1.4.1.890.1.5.12.46.54.4.1.1
Ip type for subnet-based vlan entry
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType ipv4(1), ipv6(2)  

subnetBasedVlanInfoSrcIp 1.3.6.1.4.1.890.1.5.12.46.54.4.1.2
source ip of IPv4 or IPv6 for subnet-based vlan entry
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress  

subnetBasedVlanInfoSrcMaskBit 1.3.6.1.4.1.890.1.5.12.46.54.4.1.3
source ip mask-bits for subnet-based vlan entry
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

subnetBasedVlanInfoName 1.3.6.1.4.1.890.1.5.12.46.54.4.1.4
name for subnet-based vlan entry
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

subnetBasedVlanInfoVid 1.3.6.1.4.1.890.1.5.12.46.54.4.1.5
vid for subnet-based vlan entry
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..4094  

subnetBasedVlanInfoPriority 1.3.6.1.4.1.890.1.5.12.46.54.4.1.6
priority for subnet-based vlan entry
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

subnetBasedVlanInfoEntryState 1.3.6.1.4.1.890.1.5.12.46.54.4.1.7
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

macAuthenticationSetup 1.3.6.1.4.1.890.1.5.12.46.55
OBJECT IDENTIFIER    

macAuthenticationState 1.3.6.1.4.1.890.1.5.12.46.55.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

macAuthenticationNamePrefix 1.3.6.1.4.1.890.1.5.12.46.55.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

macAuthenticationPassword 1.3.6.1.4.1.890.1.5.12.46.55.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

macAuthenticationTimeout 1.3.6.1.4.1.890.1.5.12.46.55.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

macAuthenticationPortTable 1.3.6.1.4.1.890.1.5.12.46.55.5
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MacAuthenticationPortEntry

macAuthenticationPortEntry 1.3.6.1.4.1.890.1.5.12.46.55.5.1
An entry in macAuthenticationPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAuthenticationPortEntry  

macAuthenticationPortState 1.3.6.1.4.1.890.1.5.12.46.55.5.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

mstp 1.3.6.1.4.1.890.1.5.12.46.56
OBJECT IDENTIFIER    

mstpGen 3.1
OBJECT IDENTIFIER    

mstpGenState 3.1.1
Enabled/disabled on the mrstp bridge.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

mstpGenCfgIdName 3.1.2
The configuration name that identifies the MST region and is used as one of the inputs in the computation of the MST Configuration Identifier.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

mstpGenCfgIdRevLevel 3.1.3
This object identifies the MST revision that identifies the MST region and is used as one of the inputs in the computation of the MST configuration Identifier.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

mstpGenCfgIdCfgDigest 3.1.4
Configuration Digest.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(16)  

mstpGenHelloTime 3.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  Timeout 1..10  

mstpGenMaxAge 3.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  Timeout 6..40  

mstpGenForwardDelay 3.1.7
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  Timeout 4..30  

mstpGenMaxHops 3.1.8
13.22.f)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

mstpGenCistRootPathCost 3.1.9
.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mstpGenCistRootBrid 3.1.10
.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(8)  

mstMapTable 3.20
This table contains one entry for each instance of MSTP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MstMapEntry

mstMapEntry 3.20.1
A conceptual row containing the status of the MSTP instance.
Status: current Access: not-accessible
OBJECT-TYPE    
  MstMapEntry  

mstMapIndex 3.20.1.1
Uniquely identifies an instance. The entry of this table with index 0 presents always, represents CIST. When SET operation
Status: current Access: not-accessible
OBJECT-TYPE    
  MstiOrCistInstanceIndex  

mstMapVlans1k 3.20.1.2
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. Empty (zero) most significant octes are not current.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

mstMapVlans2k 3.20.1.3
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 1024 through 1031; the second octet to VLANs 1032 through 1039 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. Empty (zero) most significant octes are not current.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

mstMapVlans3k 3.20.1.4
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. Empty (zero) most significant octes are not current.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

mstMapVlans4k 3.20.1.5
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 3072 through 3079; the second octet to VLANs 3080 through 3087 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. Empty (zero) most significant octes are not current.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

mstMapRowStatus 3.20.1.6
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

mstVlanTable 3.30
This table contains one entry for each VlanId.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MstVlanEntry

mstVlanEntry 3.30.1
Information regarding the instance to which each Vlan is mapped.
Status: current Access: not-accessible
OBJECT-TYPE    
  MstVlanEntry  

mstVlanIndex 3.30.1.1
The VlanId for which this entry contains the instance mapped.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..4094  

mstVlanMstIndex 3.30.1.2
An integer with values ranging from 0 to 64 that identify a the CIST/MSTI instance to which this VLAN is mapped
Status: current Access: read-only
OBJECT-TYPE    
  MstiOrCistInstanceIndex  

mstpPortTable 3.40
A table that contains generic information about every port that is associated with this bridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MstpPortEntry

mstpPortEntry 3.40.1
A list of information for each port of the bridge.
Status: current Access: not-accessible
OBJECT-TYPE    
  MstpPortEntry  

mstpPortIndex 3.40.1.1
A unique value, greater than zero, for each Port. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..65535  

mstpPortOperEdgePort 3.40.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mstpPortOperPointToPointMAC 3.40.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

mstpXstTable 3.50
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MstpXstEntry

mstpXstEntry 3.50.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  MstpXstEntry  

mstpXstId 3.50.1.1
0 means CIST.
Status: current Access: read-only
OBJECT-TYPE    
  MstiOrCistInstanceIndex  

mstpXstBridgePriority 3.50.1.2
Bridge priority, in steps of 4096.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..61440  

mstpXstBridgeId 3.50.1.3
.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

mstpXstInternalRootCost 3.50.1.4
.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mstpXstRootPort 3.50.1.5
.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mstpXstTimeSinceTopologyChange 3.50.1.6
.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

mstpXstTopologyChangesCount 3.50.1.7
.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

mstpXstPortTable 3.60
.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MstpXstPortEntry

mstpXstPortEntry 3.60.1
.
Status: current Access: not-accessible
OBJECT-TYPE    
  MstpXstPortEntry  

mstpXstPortXstId 3.60.1.1
0 means CIST.
Status: current Access: not-accessible
OBJECT-TYPE    
  MstiOrCistInstanceIndex  

mstpXstPortIndex 3.60.1.2
The value of mstpPortIndex of the Port in mstpPortTable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

mstpXstPortEnable 3.60.1.3
.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

mstpXstPortPriority 3.60.1.4
Port priority, in steps of 16.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..255  

mstpXstPortPathCost 3.60.1.5
.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

mstpXstPortState 3.60.1.6
.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disabled(0), discarding(1), learning(2), forwarding(3), unknown(4)  

mstpXstPortDesignatedRoot 3.60.1.7
.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

mstpXstPortDesignatedCost 3.60.1.8
.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

mstpXstPortDesignatedBridge 3.60.1.9
.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeId  

mstpXstPortDesignatedPort 3.60.1.10
.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

mstpNotifications 3.70
OBJECT IDENTIFIER    

mstpNewRoot 3.70.1
Tok_String
Status: current Access: read-only
NOTIFICATION-TYPE    

mstpTopologyChange 3.70.2
Tok_String
Status: current Access: read-only
NOTIFICATION-TYPE    

radiusServerSetup 1.3.6.1.4.1.890.1.5.12.46.57
OBJECT IDENTIFIER    

radiusAuthServerSetup 1.3.6.1.4.1.890.1.5.12.46.57.1
OBJECT IDENTIFIER    

radiusAuthServerMode 1.3.6.1.4.1.890.1.5.12.46.57.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER index-priority(1), round-robin(2)  

radiusAuthServerTimeout 1.3.6.1.4.1.890.1.5.12.46.57.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

radiusAuthServerTable 1.3.6.1.4.1.890.1.5.12.46.57.1.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RadiusAuthServerEntry

radiusAuthServerEntry 1.3.6.1.4.1.890.1.5.12.46.57.1.3.1
An entry in radiusAuthServerTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  RadiusAuthServerEntry  

radiusAuthServerIndex 1.3.6.1.4.1.890.1.5.12.46.57.1.3.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

radiusAuthServerIpAddr 1.3.6.1.4.1.890.1.5.12.46.57.1.3.1.2
IPv4 only
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

radiusAuthServerUdpPort 1.3.6.1.4.1.890.1.5.12.46.57.1.3.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

radiusAuthServerSharedSecret 1.3.6.1.4.1.890.1.5.12.46.57.1.3.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

radiusAuthServerIpAddressType 1.3.6.1.4.1.890.1.5.12.46.57.1.3.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType ipv4(1), ipv6(2)  

radiusAuthServerIpAddress 1.3.6.1.4.1.890.1.5.12.46.57.1.3.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

radiusAcctServerSetup 1.3.6.1.4.1.890.1.5.12.46.57.2
OBJECT IDENTIFIER    

radiusAcctServerTimeout 1.3.6.1.4.1.890.1.5.12.46.57.2.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

radiusAcctServerTable 1.3.6.1.4.1.890.1.5.12.46.57.2.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RadiusAcctServerEntry

radiusAcctServerEntry 1.3.6.1.4.1.890.1.5.12.46.57.2.2.1
An entry in radiusAcctServerTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  RadiusAcctServerEntry  

radiusAcctServerIndex 1.3.6.1.4.1.890.1.5.12.46.57.2.2.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

radiusAcctServerIpAddr 1.3.6.1.4.1.890.1.5.12.46.57.2.2.1.2
IPv4 only
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

radiusAcctServerUdpPort 1.3.6.1.4.1.890.1.5.12.46.57.2.2.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

radiusAcctServerSharedSecret 1.3.6.1.4.1.890.1.5.12.46.57.2.2.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

radiusAcctServerIpAddressType 1.3.6.1.4.1.890.1.5.12.46.57.2.2.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType ipv4(1), ipv6(2)  

radiusAcctServerIpAddress 1.3.6.1.4.1.890.1.5.12.46.57.2.2.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

tacacsServerSetup 1.3.6.1.4.1.890.1.5.12.46.58
OBJECT IDENTIFIER    

tacacsAuthServerSetup 1.3.6.1.4.1.890.1.5.12.46.58.1
OBJECT IDENTIFIER    

tacacsAuthServerMode 1.3.6.1.4.1.890.1.5.12.46.58.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER index-priority(1), round-robin(2)  

tacacsAuthServerTimeout 1.3.6.1.4.1.890.1.5.12.46.58.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

tacacsAuthServerTable 1.3.6.1.4.1.890.1.5.12.46.58.1.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TacacsAuthServerEntry

tacacsAuthServerEntry 1.3.6.1.4.1.890.1.5.12.46.58.1.3.1
An entry in tacacsAuthServerTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  TacacsAuthServerEntry  

tacacsAuthServerIndex 1.3.6.1.4.1.890.1.5.12.46.58.1.3.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

tacacsAuthServerIpAddr 1.3.6.1.4.1.890.1.5.12.46.58.1.3.1.2
IPv4 only
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

tacacsAuthServerTcpPort 1.3.6.1.4.1.890.1.5.12.46.58.1.3.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

tacacsAuthServerSharedSecret 1.3.6.1.4.1.890.1.5.12.46.58.1.3.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

tacacsAuthServerIpAddressType 1.3.6.1.4.1.890.1.5.12.46.58.1.3.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType ipv4(1), ipv6(2)  

tacacsAuthServerIpAddress 1.3.6.1.4.1.890.1.5.12.46.58.1.3.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

tacacsAcctServerSetup 1.3.6.1.4.1.890.1.5.12.46.58.2
OBJECT IDENTIFIER    

tacacsAcctServerTimeout 1.3.6.1.4.1.890.1.5.12.46.58.2.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

tacacsAcctServerTable 1.3.6.1.4.1.890.1.5.12.46.58.2.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TacacsAcctServerEntry

tacacsAcctServerEntry 1.3.6.1.4.1.890.1.5.12.46.58.2.2.1
An entry in tacacsAcctServerTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  TacacsAcctServerEntry  

tacacsAcctServerIndex 1.3.6.1.4.1.890.1.5.12.46.58.2.2.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

tacacsAcctServerIpAddr 1.3.6.1.4.1.890.1.5.12.46.58.2.2.1.2
IPv4 only
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

tacacsAcctServerTcpPort 1.3.6.1.4.1.890.1.5.12.46.58.2.2.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

tacacsAcctServerSharedSecret 1.3.6.1.4.1.890.1.5.12.46.58.2.2.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

tacacsAcctServerIpAddressType 1.3.6.1.4.1.890.1.5.12.46.58.2.2.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType ipv4(1), ipv6(2)  

tacacsAcctServerIpAddress 1.3.6.1.4.1.890.1.5.12.46.58.2.2.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

aaaSetup 1.3.6.1.4.1.890.1.5.12.46.59
OBJECT IDENTIFIER    

authenticationSetup 1.3.6.1.4.1.890.1.5.12.46.59.1
OBJECT IDENTIFIER    

authenticationTypeTable 1.3.6.1.4.1.890.1.5.12.46.59.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AuthenticationTypeEntry

authenticationTypeEntry 1.3.6.1.4.1.890.1.5.12.46.59.1.1.1
An entry in authenticationTypeTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  AuthenticationTypeEntry  

authenticationTypeName 1.3.6.1.4.1.890.1.5.12.46.59.1.1.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

authenticationTypeMethodList 1.3.6.1.4.1.890.1.5.12.46.59.1.1.1.2
Enable-local: 1, Login-local: 2, radius: 3, tacacs+: 4
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

accountingSetup 1.3.6.1.4.1.890.1.5.12.46.59.2
OBJECT IDENTIFIER    

accountingUpdatePeriod 1.3.6.1.4.1.890.1.5.12.46.59.2.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

accountingTypeTable 1.3.6.1.4.1.890.1.5.12.46.59.2.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AccountingTypeEntry

accountingTypeEntry 1.3.6.1.4.1.890.1.5.12.46.59.2.2.1
An entry in accountingTypeTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  AccountingTypeEntry  

accountingTypeName 1.3.6.1.4.1.890.1.5.12.46.59.2.2.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

accountingTypeActive 1.3.6.1.4.1.890.1.5.12.46.59.2.2.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

accountingTypeBroadcast 1.3.6.1.4.1.890.1.5.12.46.59.2.2.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

accountingTypeMode 1.3.6.1.4.1.890.1.5.12.46.59.2.2.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER not-available(255), start-stop(1), stop-only(2)  

accountingTypeMethod 1.3.6.1.4.1.890.1.5.12.46.59.2.2.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER radius(1), tacacs(2)  

accountingTypePrivilege 1.3.6.1.4.1.890.1.5.12.46.59.2.2.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER not-available(255), privilege-0(0), privilege-1(1), privilege-2(2), privilege-3(3), privilege-4(4), privilege-5(5), privilege-6(6), privilege-7(7), privilege-8(8), privilege-9(9), privilege-10(10), privilege-11(11), privilege-12(12), privilege-13(13), privilege-14(14)  

vdsl2Ext 1.3.6.1.4.1.890.1.5.12.46.60
OBJECT IDENTIFIER    

xdsl2ExtNotifications 1.3.6.1.4.1.890.1.5.12.46.60.0
OBJECT IDENTIFIER    

xdsl2ExtLine 1.3.6.1.4.1.890.1.5.12.46.60.1
OBJECT IDENTIFIER    

xdsl2ExtStatus 1.3.6.1.4.1.890.1.5.12.46.60.2
OBJECT IDENTIFIER    

xdsl2ExtPM 1.3.6.1.4.1.890.1.5.12.46.60.4
OBJECT IDENTIFIER    

xdsl2ExtProfile 1.3.6.1.4.1.890.1.5.12.46.60.5
OBJECT IDENTIFIER    

xdsl2ExtPMLine 1.3.6.1.4.1.890.1.5.12.46.60.4.1
OBJECT IDENTIFIER    

xdsl2ExtPMChannel 1.3.6.1.4.1.890.1.5.12.46.60.4.2
OBJECT IDENTIFIER    

xdsl2ExtProfileLine 1.3.6.1.4.1.890.1.5.12.46.60.5.1
OBJECT IDENTIFIER    

xdsl2ExtProfileChannel 1.3.6.1.4.1.890.1.5.12.46.60.5.2
OBJECT IDENTIFIER    

xdsl2ExtProfileAlarmConf 1.3.6.1.4.1.890.1.5.12.46.60.5.3
OBJECT IDENTIFIER    

xdsl2ExtLineTable 1.3.6.1.4.1.890.1.5.12.46.60.1.1
The table xdsl2ExtLineTable extends xdsl2LineTable for ZyXEL product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtLineEntry

xdsl2ExtLineEntry 1.3.6.1.4.1.890.1.5.12.46.60.1.1.1
The table xdsl2ExtLineTable contains extra functions besides those in xdsl2LineTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtLineEntry  

xdsl2LineCmndConfSelt 1.3.6.1.4.1.890.1.5.12.46.60.1.1.1.1
Trigger a SELT(Single End Loop Test) for the line. Note the loop should be open.
Status: current Access: read-write
OBJECT-TYPE    
  Xdsl2LineLdsf  

xdsl2ExtLineBandTable 1.3.6.1.4.1.890.1.5.12.46.60.1.2
The table xdsl2ExtLineBandTable extends xdsl2LineBandTable for ZyXEL product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtLineBandEntry

xdsl2ExtLineBandEntry 1.3.6.1.4.1.890.1.5.12.46.60.1.2.1
The table xdsl2ExtLineBandTable contains extra per-band line status parameters besides those in xdsl2LineBandTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtLineBandEntry  

xdsl2LineBandStatusActAtp 1.3.6.1.4.1.890.1.5.12.46.60.1.2.1.1
Actual Aggregate Transmit Power per band. A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -310..310 | 2147483647  

xdsl2LineBandStatusActRxPwr 1.3.6.1.4.1.890.1.5.12.46.60.1.2.1.2
Actual Aggregate Receive Power per band. A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -255..255 | 2147483647  

xdsl2ExtLineSegmentTable 1.3.6.1.4.1.890.1.5.12.46.60.2.1
The table xdsl2ExtLineSegmentTable extends xdsl2LineSegmentTable for ZyXEL product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtLineSegmentEntry

xdsl2ExtLineSegmentEntry 1.3.6.1.4.1.890.1.5.12.46.60.2.1.1
The table xdsl2LineExtSegmentEntry contains extra line segment status parameters besides those in xdsl2LineSegmentTable. This table stores HLOG/QLN/SNR measured during initialization.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtLineSegmentEntry  

xdsl2LineSegmentLog 1.3.6.1.4.1.890.1.5.12.46.60.2.1.1.1
This parameter is applicable in initialization and use the same format as xdsl2SCStatusSegmentLog.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..1024)  

xdsl2LineSegmentQln 1.3.6.1.4.1.890.1.5.12.46.60.2.1.1.2
This parameter is applicable in initialization and use the same format as xdsl2SCStatusSegmentQln.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

xdsl2LineSegmentSnr 1.3.6.1.4.1.890.1.5.12.46.60.2.1.1.3
This parameter is applicable in initialization and use the same format as xdsl2SCStatusSegmentSnr.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..512)  

xdsl2LineSegmentStatus 1.3.6.1.4.1.890.1.5.12.46.60.2.1.1.4
This parameter indicates whether the Hlog/Qln/Snr data is ready.
Status: current Access: read-only
OBJECT-TYPE    
  BITS hlogReady(0), qlnReady(1), snrReady(2)  

xdsl2LineSegmentLogScGroupSize 1.3.6.1.4.1.890.1.5.12.46.60.2.1.1.5
Number of subcarriers per group used to report the H(f) logarithmic representation values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the size of a subcarrier group used to compute these parameters.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1 | 2 | 4 | 8  

xdsl2LineSegmentQlnScGroupSize 1.3.6.1.4.1.890.1.5.12.46.60.2.1.1.6
Number of subcarriers per group used to report the Quiet Line Noise values for the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the size of a subcarrier group used to compute these parameters.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1 | 2 | 4 | 8  

xdsl2LineSegmentSnrScGroupSize 1.3.6.1.4.1.890.1.5.12.46.60.2.1.1.7
Number of subcarriers per group used to report the SNR values on the respective transmission direction. The valid values are 1, 2, 4 and 8. For ADSL, this parameter is equal to one and, for VDSL2, it is equal to the size of a subcarrier group used to compute these parameters.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1 | 2 | 4 | 8  

xdsl2ExtChannelStatusTable 1.3.6.1.4.1.890.1.5.12.46.60.2.2
The table xdsl2ExtChannelStatusTable extends xdsl2ChannelStatusTable for ZyXEL product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtChannelStatusEntry

xdsl2ExtChannelStatusEntry 1.3.6.1.4.1.890.1.5.12.46.60.2.2.1
The table xdsl2ExtChannelStatusTable contains extra subcarrier status parameters besides those in xdsl2ChannelStatusTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtChannelStatusEntry  

xdsl2ChannelStatusActualRaMode 1.3.6.1.4.1.890.1.5.12.46.60.2.2.1.1
The actual RA mode. The possible values are: fixedRateMode(1) - Fixed rate mode raInit(2) - Adaptive rate mode at initialization dynamicRa(3) - Dynamic rate adaptation sosEnabled(4) - SOS enabled
Status: current Access: read-only
OBJECT-TYPE    
  Xdsl2StatusActualRaMode  

xdsl2ChannelStatusRetransmissionMode 1.3.6.1.4.1.890.1.5.12.46.60.2.2.1.2
RTX-USED operational data parameter. The possible values are: rtxInUse(1) - RTX in use. rtxForbidden(2) - RTX not in use because RTX-MODE = FORBIDDEN. rtxNotSupportedXtuC(3) - RTX not in use because it is not supported by the XTU-C. rtxNotSupportedXtuR(4) - RTX not in use because it is not supported by the XTU-R. rtxNotSupportedBoth(5) - RTX not in use because it is not supported by the XTU-C and XTU-R.
Status: current Access: read-only
OBJECT-TYPE    
  Xdsl2StatusRtxMode  

xdsl2ChannelStatusRetransmissionOverhead 1.3.6.1.4.1.890.1.5.12.46.60.2.2.1.3
Expected retransmission overhead in G.inp due to REIN and SHINE noise. Unit is kbps.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2ChannelStatusGinpFramingType 1.3.6.1.4.1.890.1.5.12.46.60.2.2.1.4
This parameter is equal to zero if G.inp is not enabled. If G.inp is enabled, it reports the framing type in use (1, 2, 3, or 4).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2ChannelStatusActualInpAgainstREIN 1.3.6.1.4.1.890.1.5.12.46.60.2.2.1.5
This parameter reports the actual INP against REIN noise. Unit is 1/2 symbol.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2ChannelStatusReedSolomonCodeWordPerDtu 1.3.6.1.4.1.890.1.5.12.46.60.2.2.1.6
This parameter reports the number of RS codewords per DTU. It is equal to D when PhyR is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2ExtSCStatusTable 1.3.6.1.4.1.890.1.5.12.46.60.2.3
The table xdsl2ExtSCStatusTable extends xdsl2SCStatusTable for ZyXEL product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtSCStatusEntry

xdsl2ExtSCStatusEntry 1.3.6.1.4.1.890.1.5.12.46.60.2.3.1
The table xdsl2ExtSCStatusTable contains extra subcarrier status parameters besides those in xdsl2SCStatusTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtSCStatusEntry  

xdsl2SCStatusActAtp 1.3.6.1.4.1.890.1.5.12.46.60.2.3.1.1
Actual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the xTU-C at the U-C reference point, at the instant of measurement. It ranges from -310 to 310 units of 0.1 dBm (Physical values are -31 to 31 dBm). A value of 0x7FFFFFFF (2147483647) indicates the measurement is out of range to be represented. This object reflects the value of the parameter following the most recent DELT performed on the associated line. Once the DELT process is over, the parameter no longer changes until the row is deleted or a new DELT process is initiated.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -310..310 | 2147483647  

xdsl2ExtSCStatusBandTable 1.3.6.1.4.1.890.1.5.12.46.60.2.4
The table xdsl2ExtSCStatusBandTable extends xdsl2SCStatusBandTable for ZyXEL product.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtSCStatusBandEntry

xdsl2ExtSCStatusBandEntry 1.3.6.1.4.1.890.1.5.12.46.60.2.4.1
The table xdsl2ExtSCStatusBandTable contains extra subcarrier status parameters that are grouped per-band besides those in xdsl2SCStatusBandTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtSCStatusBandEntry  

xdsl2SCStatusBandSnrMargin 1.3.6.1.4.1.890.1.5.12.46.60.2.4.1.1
SNR Margin is the maximum increase in dB of the noise power received at the xTU (xTU-R for a band in the downstream direction and xTU-C for a band in the upstream direction), such that the BER requirements are met for all bearer channels received at the xTU. Values range from -640 to 630 in units of 0.1 dB (Physical values are -64 to 63 dB). A special value of 0x7FFFFFFF (2147483647) indicates the SNR Margin is out of range to be represented. A special value of 0x7FFFFFFE (2147483646) indicates the SNR Margin measurement is currently unavailable. This object reflects the value of the parameter following the most recent DELT performed on the associated line. Once the DELT process is over, the parameter no longer changes until the row is deleted or a new DELT process is initiated.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -640..630 | 2147483646 | 2147483647  

xdsl2ExtSeltStatusTable 1.3.6.1.4.1.890.1.5.12.46.60.2.6
The table xdsl2ExtSeltStatusTable contains SELT status.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtSeltStatusEntry

xdsl2ExtSeltStatusEntry 1.3.6.1.4.1.890.1.5.12.46.60.2.6.1
The table xdsl2ExtSeltStatusEntry contains SELT status.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtSeltStatusEntry  

xdsl2SeltStatus 1.3.6.1.4.1.890.1.5.12.46.60.2.6.1.1
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 idle(0), inProgress(1), failed(2), done(3)  

xdsl2SeltStatusLineType 1.3.6.1.4.1.890.1.5.12.46.60.2.6.1.2
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

xdsl2SeltStatusLineLength 1.3.6.1.4.1.890.1.5.12.46.60.2.6.1.3
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

xdsl2ExtSeltReflectionStatusTable 1.3.6.1.4.1.890.1.5.12.46.60.2.7
The table xdsl2ExtSeltReflectionStatusTable contains SELT status for each reflection.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtSeltReflectionStatusEntry

xdsl2ExtSeltReflectionStatusEntry 1.3.6.1.4.1.890.1.5.12.46.60.2.7.1
The table xdsl2ExtSeltReflectionStatusTable contains SELT status for each reflection.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtSeltReflectionStatusEntry  

xdsl2SeltReflection 1.3.6.1.4.1.890.1.5.12.46.60.2.7.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

xdsl2SeltDelay 1.3.6.1.4.1.890.1.5.12.46.60.2.7.1.2
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

xdsl2SeltError 1.3.6.1.4.1.890.1.5.12.46.60.2.7.1.3
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

xdsl2SeltAtn180kHz 1.3.6.1.4.1.890.1.5.12.46.60.2.7.1.4
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

xdsl2SeltAtn300kHz 1.3.6.1.4.1.890.1.5.12.46.60.2.7.1.5
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

xdsl2SeltFitError 1.3.6.1.4.1.890.1.5.12.46.60.2.7.1.6
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

xdsl2SeltFitTermination 1.3.6.1.4.1.890.1.5.12.46.60.2.7.1.7
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

xdsl2ExtPMLineCurrTable 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1
The table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtPMLineCurrEntry

xdsl2ExtPMLineCurrEntry 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1
The table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtPMLineCurrEntry  

xdsl2PMLSinceLinkFecs 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.1
Count of seconds since last link up that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited during UAS or SES.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLSinceLinkEs 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.2
Count of seconds since last link up that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >=1 OR LPR >= 1 xTU-R: FEBE >= 1 for one or more bearer channels OR LOS-FE >=1 OR RDI >=1 OR LPR-FE >=1 . This parameter is inhibited during UAS.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLSinceLinkSes 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.3
Count of seconds since last link up that that there was: xTU-C: (CRC-8 anomalies in one or more of the received bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: (FEBE anomalies in one or more of the received bearer channels) >= 18 OR LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1 . This parameter is inhibited during UAS.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLSinceLinkLoss 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.4
Count of seconds since last link up that there was LOS (or LOS-FE for xTU-R).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLSinceLinkUas 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.5
Count of seconds in Unavailability State since last line up. Unavailability begins at the onset of 10 contiguous severely-errored seconds, and ends at the onset of 10 contiguous seconds with no severely-errored seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLSinceLinkLofs 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.6
Count of seconds since last link up that there was LOF.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLSinceLinkLol 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.7
Count of times the line loss of link since last link up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLSinceLinkLols 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.8
Count of seconds since last link up that there was Loss of Link .
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLSinceLinkLpr 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.9
Count of the line loss of power since last link up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLSinceLinkLprs 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.10
Count of seconds since last link up that there was Loss of Power .
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLCurr15MLofs 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.11
Count of seconds during this interval that there was LOF.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLCurr15MLol 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.12
Count of times during this interval that the line Loss of Link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLCurr15MLols 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.13
Count of seconds during this interval that there was Loss of Link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLCurr15MLpr 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.14
Count of times during this interval that the line Loss of Power.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLCurr15MLprs 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.15
Count of seconds during this interval that there was Loss of Power.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLCurr1DayLofs 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.16
Count of seconds during this interval that there was LOF.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLCurr1DayLol 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.17
Count of times during this interval that the line Loss of Link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLCurr1DayLols 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.18
Count of seconds during this interval that there was Loss of Link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLCurr1DayLpr 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.19
Count of times during this interval that the line Loss of Power.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLCurr1DayLprs 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.20
Count of seconds during this interval that there was Loss of Power.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLSinceLinkInmEqInp 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.21
The INM Equivalent Inp histogram since last link up. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of the bin incremented by an impulse noise event is equal to the computed value of equivalent INP, except the 17th of anomaly INPEQ, which logs all equivalent INPs greater than 16. Each bin has a value in the range 0x0 to 0xFFFFFFFF
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLSinceLinkInmIAT 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.22
The INM Inter Arrival Time histogram since last link up. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the particular bin incremented by an complete impulse noise event is determained from the following INMControl parameters. Each bin has a value in the range 0x0 to 0xFFFFFFFF
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLSinceLinkInmME 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.23
The INM total measurement since last link up. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLCurr15MInmEqInp 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.24
The INM Equivalent Inp histogram during this 15min interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of the bin incremented by an impulse noise event is equal to the computed value of equivalent INP, except the 17th of anomaly INPEQ, which logs all equivalent INPs greater than 16. Each bin has a value in the range 0x0 to 0xFFFFFFFF
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLCurr15MInmIAT 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.25
The INM Inter Arrival Time histogram during this 15min interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the particular bin incremented by an complete impulse noise event is determained from the following INMControl parameters. Each bin has a value in the range 0x0 to 0xFFFFFFFF
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLCurr15MInmME 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.26
The INM total measurement during this 15min interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLCurr1DayInmEqInp 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.27
The INM Equivalent Inp histogram during this 1Day interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of the bin incremented by an impulse noise event is equal to the computed value of equivalent INP, except the 17th of anomaly INPEQ, which logs all equivalent INPs greater than 16. Each bin has a value in the range 0x0 to 0xFFFFFFFF
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLCurr1DayInmIAT 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.28
The INM Inter Arrival Time histogram during this 1Day interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the particular bin incremented by an complete impulse noise event is determained from the following INMControl parameters. Each bin has a value in the range 0x0 to 0xFFFFFFFF
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLCurr1DayInmME 1.3.6.1.4.1.890.1.5.12.46.60.4.1.1.1.29
The INM total measurement during this 1Day interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2ExtPMLineHist15MinTable 1.3.6.1.4.1.890.1.5.12.46.60.4.1.3
The table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtPMLineHist15MinEntry

xdsl2ExtPMLineHist15MinEntry 1.3.6.1.4.1.890.1.5.12.46.60.4.1.3.1
The table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtPMLineHist15MinEntry  

xdsl2PMLHist15MLofs 1.3.6.1.4.1.890.1.5.12.46.60.4.1.3.1.1
Count of seconds during this interval that there was LOF.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLHist15MLol 1.3.6.1.4.1.890.1.5.12.46.60.4.1.3.1.2
Count of times during this interval that the line Loss of Link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLHist15MLols 1.3.6.1.4.1.890.1.5.12.46.60.4.1.3.1.3
Count of seconds during this interval that the line Loss of Link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLHist15MLpr 1.3.6.1.4.1.890.1.5.12.46.60.4.1.3.1.4
Count of times during this interval that the line Loss of Power.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLHist15MLprs 1.3.6.1.4.1.890.1.5.12.46.60.4.1.3.1.5
Count of seconds during this interval that the line Loss of Power.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLHist15MInmEqInp 1.3.6.1.4.1.890.1.5.12.46.60.4.1.3.1.6
The INM Equivalent Inp histogram during 15min interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of the bin incremented by an impulse noise event is equal to the computed value of equivalent INP, except the 17th of anomaly INPEQ, which logs all equivalent INPs greater than 16. Each bin has a value in the range 0x0 to 0xFFFFFFFF
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLHist15MInmIAT 1.3.6.1.4.1.890.1.5.12.46.60.4.1.3.1.7
The INM Inter Arrival Time histogram during 15min interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the particular bin incremented by an complete impulse noise event is determained from the following INMControl parameters. Each bin has a value in the range 0x0 to 0xFFFFFFFF
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLHist15MInmME 1.3.6.1.4.1.890.1.5.12.46.60.4.1.3.1.8
The INM total measurement during 15min interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2ExtPMLineHist1DayTable 1.3.6.1.4.1.890.1.5.12.46.60.4.1.4
The table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtPMLineHist1DayEntry

xdsl2ExtPMLineHist1DayEntry 1.3.6.1.4.1.890.1.5.12.46.60.4.1.4.1
The table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtPMLineHist1DayEntry  

xdsl2PMLHist1DLofs 1.3.6.1.4.1.890.1.5.12.46.60.4.1.4.1.1
Count of seconds during this interval that there was LOF.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLHist1DLol 1.3.6.1.4.1.890.1.5.12.46.60.4.1.4.1.2
Count of times during this interval that the line Loss of Link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLHist1DLols 1.3.6.1.4.1.890.1.5.12.46.60.4.1.4.1.3
Count of seconds during this interval that the line Loss of Link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLHist1DLpr 1.3.6.1.4.1.890.1.5.12.46.60.4.1.4.1.4
Count of times during this interval that the line Loss of Power.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLHist1DLprs 1.3.6.1.4.1.890.1.5.12.46.60.4.1.4.1.5
Count of seconds during this interval that the line Loss of Power.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLHist1DInmEqInp 1.3.6.1.4.1.890.1.5.12.46.60.4.1.4.1.6
The INM Equivalent Inp histogram during 1Day interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 to 17 bins of the histogram. The particular index of the bin incremented by an impulse noise event is equal to the computed value of equivalent INP, except the 17th of anomaly INPEQ, which logs all equivalent INPs greater than 16. Each bin has a value in the range 0x0 to 0xFFFFFFFF
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLHist1DInmIAT 1.3.6.1.4.1.890.1.5.12.46.60.4.1.4.1.7
The INM Inter Arrival Time histogram during 1Day interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 0 to 7 bins of the histogram. The index of the particular bin incremented by an complete impulse noise event is determained from the following INMControl parameters. Each bin has a value in the range 0x0 to 0xFFFFFFFF
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2PMLHist1DInmME 1.3.6.1.4.1.890.1.5.12.46.60.4.1.4.1.8
The INM total measurement during this 1Day interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value is from 0x0 to 0xFFFFFFFF
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

xdsl2ExtPMChCurrTable 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1
The table xdsl2PMChCurrTable extends xdsl2PMChCurrTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtPMChCurrEntry

xdsl2ExtPMChCurrEntry 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1
The table xdsl2PMChCurrTable extends xdsl2PMChCurrTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtPMChCurrEntry  

xdsl2PMChSinceLinkUncorrectedCWs 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.1
Count of codewords that could not be corrected since last link up.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChCurr15MUncorrectedCWs 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.2
Count of codewords that could not be corrected since during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChCurr1DayUncorrectedCWs 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.3
Count of codewords that could not be corrected since during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChSinceLinkCodingViolations 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.4
Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel since last link up.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChSinceLinkCorrectedBlocks 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.5
Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel since last link up.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChSinceLinkRtx 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.6
Number of codewords retransmitted since last link up.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChCurr15MRtx 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.7
Number of codewords retransmitted during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChCurr1DayRtx 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.8
Number of codewords retransmitted during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChSinceLinkRtxCorrected 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.9
Number of codewords corrected through retransmission since last link up.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChCurr15MRtxCorrected 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.10
Number of codewords corrected through retransmission during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChCurr1DayRtxCorrected 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.11
Number of codewords corrected through retransmission during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChSinceLinkRtxUncorrected 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.12
Number of codewords left uncorrected after retransmission since last link up.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChCurr15MRtxUncorrected 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.13
Number of codewords left uncorrected after retransmission during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChCurr1DayRtxUncorrected 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.14
Number of codewords left uncorrected after retransmission during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChSinceLinkLEFTRs 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.15
Low Error-Free Throughput Rate Seconds since last link up.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChCurr15MLEFTRs 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.16
Low Error-Free Throughput Rate Seconds during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChCurr1DayLEFTRs 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.17
Low Error-Free Throughput Rate Seconds during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChSinceLinkMinEFTR 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.18
Lowest EFTR observed since last link up.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChCurr15MMinEFTR 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.19
Lowest EFTR observed in the current interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChCurr1DayMinEFTR 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.20
Lowest EFTR observed in the current interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChSinceLinkErrFreeBits 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.21
The number of bits belonging to correct DTUs leaving the Rx PMS-TC 2(V16) since last link up.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChCurr15MErrFreeBits 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.22
The number of bits belonging to correct DTUs leaving the Rx PMS-TC 2(V16) during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChCurr1DayErrFreeBits 1.3.6.1.4.1.890.1.5.12.46.60.4.2.1.1.23
The number of bits belonging to correct DTUs leaving the Rx PMS-TC 2(V16) during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2ExtPMChHist15MinTable 1.3.6.1.4.1.890.1.5.12.46.60.4.2.2
The table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtPMChHist15MinEntry

xdsl2ExtPMChHist15MinEntry 1.3.6.1.4.1.890.1.5.12.46.60.4.2.2.1
The table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtPMChHist15MinEntry  

xdsl2PMChHist15MUncorrectedCWs 1.3.6.1.4.1.890.1.5.12.46.60.4.2.2.1.1
Count of codewords that could not be corrected since during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChHist15MRtx 1.3.6.1.4.1.890.1.5.12.46.60.4.2.2.1.2
Number of codewords retransmitted during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChHist15MRtxCorrected 1.3.6.1.4.1.890.1.5.12.46.60.4.2.2.1.3
Number of codewords corrected through retransmission during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChHist15MRtxUncorrected 1.3.6.1.4.1.890.1.5.12.46.60.4.2.2.1.4
Number of codewords left uncorrected after retransmission during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChHist15MLEFTRs 1.3.6.1.4.1.890.1.5.12.46.60.4.2.2.1.5
Low Error-Free Throughput Rate Seconds during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChHist15MMinEFTR 1.3.6.1.4.1.890.1.5.12.46.60.4.2.2.1.6
Lowest EFTR observed in the current interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChHist15MErrFreeBits 1.3.6.1.4.1.890.1.5.12.46.60.4.2.2.1.7
The number of bits belonging to correct DTUs leaving the Rx PMS-TC 2(V16) during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2ExtPMChHist1DTable 1.3.6.1.4.1.890.1.5.12.46.60.4.2.3
The table xdsl2ExtPMChHist1DTable extends xdsl2PMChHist1DTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtPMChHist1DEntry

xdsl2ExtPMChHist1DEntry 1.3.6.1.4.1.890.1.5.12.46.60.4.2.3.1
The table xdsl2ExtPMChHist1DTable extends xdsl2PMChHist1DTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtPMChHist1DEntry  

xdsl2PMChHist1DayUncorrectedCWs 1.3.6.1.4.1.890.1.5.12.46.60.4.2.3.1.1
Count of codewords that could not be corrected since during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChHist1DayRtx 1.3.6.1.4.1.890.1.5.12.46.60.4.2.3.1.2
Number of codewords retransmitted during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChHist1DayRtxCorrected 1.3.6.1.4.1.890.1.5.12.46.60.4.2.3.1.3
Number of codewords corrected through retransmission during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChHist1DayRtxUncorrected 1.3.6.1.4.1.890.1.5.12.46.60.4.2.3.1.4
Number of codewords left uncorrected after retransmission during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChHist1DayLEFTRs 1.3.6.1.4.1.890.1.5.12.46.60.4.2.3.1.5
Low Error-Free Throughput Rate Seconds during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChHist1DayMinEFTR 1.3.6.1.4.1.890.1.5.12.46.60.4.2.3.1.6
Lowest EFTR observed in the current interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2PMChHist1DayErrFreeBits 1.3.6.1.4.1.890.1.5.12.46.60.4.2.3.1.7
The number of bits belonging to correct DTUs leaving the Rx PMS-TC 2(V16) during this interval.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2ExtLineConfTemplateTable 1.3.6.1.4.1.890.1.5.12.46.60.5.1.1
The table xdsl2ExtLineConfTemplateTable extends xdsl2LineConfTemplateTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtLineConfTemplateEntry

xdsl2ExtLineConfTemplateEntry 1.3.6.1.4.1.890.1.5.12.46.60.5.1.1.1
TThe table xdsl2ExtLineConfTemplateTable extends xdsl2LineConfTemplateTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtLineConfTemplateEntry  

xdsl2LConfTempPortList 1.3.6.1.4.1.890.1.5.12.46.60.5.1.1.1.1
A port list that indicates which ports this template applys for.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

xdsl2LConfTempInmConfProfile 1.3.6.1.4.1.890.1.5.12.46.60.5.1.1.1.2
The value of this object identifies the row in the VDSL2/ADSL/ADSL2 and ADSL2+ INM configuration Profile Table, (xdsl2ExtInmConfProfTable) that applies for this DSL line.
Status: current Access: read-create
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

xdsl2ExtLineConfProfTable 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2
The table xdsl2ExtLineConfProfTable extends xdsl2LineConfProfTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtLineConfProfEntry

xdsl2ExtLineConfProfEntry 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1
The table xdsl2ExtLineConfProfTable extends xdsl2LineConfProfTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtLineConfProfEntry  

xdsl2LConfProfBitSwapDs 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.1
This configuration parameter indicates if the use of bitswap is disabled on downstream direction. The possible values are: disable(0), enable(1)
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2LConfProfBitSwapUs 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.2
This configuration parameter indicates if the use of bitswap is disabled on upstream direction. The possible values are: disable(0), enable(1)
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2LConfProfPortList 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.3
A port list that indicates which ports this profile applys for.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

xdsl2LConfProfSosTimeDs 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.4
The parameter SOS-TIME-ds is used in the specification of the receiver initiated SOS (see 13.4.3/G.993.2). If the value of this parameter is not zero, the standard SOS triggering criteria are enabled, and the value corresponds with duration of the time window used in the standard SOS triggering criteria in the downstream direction. See G.993.2 for detailed usage rules. The special value zero indicates that the standard SOS triggering criteria are disabled, i.e., vendor-discretionary values may be used instead of the values configured in the MIB for the following parameters: SOS-NTONES-ds, SOS-CRC-ds, SOS-TIME-ds. This parameter applies in the downstream direction. The valid range of non-zero values is from 64 ms to 16320 ms in steps of 64 ms.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2LConfProfSosTimeUs 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.5
The parameter SOS-TIME-u s is used in the specification of the receiver initiated SOS (see 13.4.3/G.993.2). If the value of this parameter is not zero, the standard SOS triggering criteria are enabled, and the value corresponds with duration of the time window used in the standard SOS triggering criteria in the downstream direction. See G.993.2 for detailed usage rules. The special value zero indicates that the standard SOS triggering criteria are disabled, i.e., vendor-discretionary values may be used instead of the values configured in the MIB for the following parameters: SOS-NTONES-ds, SOS-CRC-ds, SOS-TIME-ds. This parameter applies in the downstream direction. The valid range of non-zero values is from 64 ms to 16320 ms in steps of 64 ms.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2LConfProfSosCrcDs 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.6
This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub condition of the standard SOS triggering criteria (see 13.4.3.2/G.993.2) in the downstream direction. See G.993.2 for detailed usage rules. The valid range of SOS-CRC values is 0.02 to ((2^16)-1)*0.02, in steps of 0.02.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2LConfProfSosCrcUs 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.7
This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub condition of the standard SOS triggering criteria (see 13.4.3.2/G.993.2) in the downstream direction. See G.993.2 for detailed usage rules. The valid range of SOS-CRC values is 0.02 to ((2^16)-1)*0.02, in steps of 0.02.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2LConfProfSosNToneDs 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.8
This parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the standard SOS triggering criteria (see 13.4.3.2/G.993.2) in the downstream direction. The parameter SOS-NTONES-ds is defined as a percentage of tones. See G.993.2 for detailed usage rules. The valid range of values is from 1 to 100 in steps of 1. Use of the special value 0 is described in 13.4.3.2/G.993.2.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2LConfProfSosNToneUs 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.9
This parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the standard SOS triggering criteria (see 13.4.3.2/G.993.2) in the downstream direction. The parameter SOS-NTONES-ds is defined as a percentage of tones. See G.993.2 for detailed usage rules. The valid range of values is from 1 to 100 in steps of 1. Use of the special value 0 is described in 13.4.3.2/G.993.2.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2LConfProfSosMaxDs 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.10
This parameter is used in G.993.2 de-activation (see 12.1.4/G.993.2). If the number of successful SOS procedures in the downstream direction performed within a 120-second interval exceeds MAX-SOS-ds, the modem shall transition to the L3 state. See G.993.2 for detailed usage rules (see 12.1.4/G.993.2). The valid range of values is 1 to 15. Use of the special value 0 is described in 12.1/G.993.2.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2LConfProfSosMaxUs 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.11
This parameter is used in G.993.2 de-activation (see 12.1.4/G.993.2). If the number of successful SOS procedures in the downstream direction performed within a 120-second interval exceeds MAX-SOS-ds, the modem shall transition to the L3 state. See G.993.2 for detailed usage rules (see 12.1.4/G.993.2). The valid range of values is 1 to 15. Use of the special value 0 is described in 12.1/G.993.2.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2LConfProfSosMultiStepDs 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.12
Indicates the capabilities of the VTU-R to execute the SOS request in one step or in multiple steps in the downstream direction. The field is formatted as [gggg 0000]. The first four MSBs [gggg] indicate the maximum number of tones (GSOS) that can be executed in a single step (GSOS)in the downstream direction. The valid values are: - [0000]: No limitation - [0010]: GSOS = 256 tones - [0011]: GSOS = 512 tones - [0100]: GSOS = 1024 tones
Status: current Access: read-write
OBJECT-TYPE    
  BITS  

xdsl2LConfProfSosMultiStepUs 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.13
Indicates the capabilities of the VTU-R to execute the SOS request in one step or in multiple steps in the downstream direction. The field is formatted as [gggg 0000]. The first four MSBs [gggg] indicate the maximum number of tones (GSOS) that can be executed in a single step (GSOS)in the downstream direction. The valid values are: - [0000]: No limitation - [0010]: GSOS = 256 tones - [0011]: GSOS = 512 tones - [0100]: GSOS = 1024 tones
Status: current Access: read-write
OBJECT-TYPE    
  BITS  

xdsl2LConfProfRocEnableDs 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.14
Enable the robust overhead channel. disable(0), enable(1)
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2LConfProfRocEnableUs 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.15
Enable the robust overhead channel. disable(0), enable(1)
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2LConfProfRocSnrmDs 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.16
The parameter is defined as the SNR margin offset for the ROC channel in the downstream direction. The parameter is used in the specification of the channel initialization policy (see 12.3.7.1/G.993.2). The valid range of SNR margin offset values is from 0 to 31 dB with 0.1 dB steps.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2LConfProfRocSnrmUs 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.17
The parameter is defined as the SNR margin offset for the ROC channel in the downstream direction. The parameter is used in the specification of the channel initialization policy (see 12.3.7.1/G.993.2). The valid range of SNR margin offset values is from 0 to 31 dB with 0.1 dB steps.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2LConfProfRocMinInpDs 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.18
This parameter contains the minimum impulse noise protection to apply on the ROC in the downstream direction. The minimum impulse noise protection is an integer ranging from 0 to 16.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2LConfProfRocMinInpUs 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.19
This parameter contains the minimum impulse noise protection to apply on the ROC in the downstream direction. The minimum impulse noise protection is an integer ranging from 0 to 16.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2LConfProfDynamicDepthDs 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.20
This configuration parameter indicates if the use of Dynamic Depth is disabled on downstream direction. The possible values are: disable(0), enable(1)
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2LConfProfDynamicDepthUs 1.3.6.1.4.1.890.1.5.12.46.60.5.1.2.1.21
This configuration parameter indicates if the use of Dynamic Depth is disabled on upstream direction. The possible values are: disable(0), enable(1)
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2MaxNumLineConfTemplate 1.3.6.1.4.1.890.1.5.12.46.60.5.1.5
The maximum number of VDSL line template.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2MaxNumLineConfProfile 1.3.6.1.4.1.890.1.5.12.46.60.5.1.6
The maximum number of VDSL line profile.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2ExtInmConfProfTable 1.3.6.1.4.1.890.1.5.12.46.60.5.1.7
xdsl2ExtInmConfProfTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtInmConfProfEntry

xdsl2ExtInmConfProfEntry 1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1
xdsl2ExtInmConfProfTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtInmConfProfEntry  

xdsl2ExtInmConfProfProfileName 1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.1
This object identifies a row in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpAdminString Size(1..32)  

xdsl2ExtInmConfProfVtucInpEq 1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.2
The INM Inmpulse Noise Protection Equivalent Mode. Configuration parameter INM-INPEQ-MODE defines the way of computation of Equivalent INP, as defined in ITU-T G.993.2 Amd2 11.4.2.2.1 This takes a value in the range from 0 to 3.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3  

xdsl2ExtInmConfProfVturInpEq 1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.3
The INM Inmpulse Noise Protection Equivalent Mode. Configuration parameter INM-INPEQ-MODE defines the way of computation of Equivalent INP, as defined in ITU-T G.993.2 Amd2 11.4.2.2.1 This takes a value in the range from 0 to 3.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..3  

xdsl2ExtInmConfProfVtucCC 1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.4
The INM Cluster Continuation. The valid values for INMCC range from 0 from 64 DMT symbols in steps of 1 DMT symbol. Up to and including INMCC nondegraded symbols will be allowed before a cluster is deemed to be complete and the impulse noise event over.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2ExtInmConfProfVturCC 1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.5
The INM Cluster Continuation. The valid values for INMCC range from 0 from 64 DMT symbols in steps of 1 DMT symbol. Up to and including INMCC nondegraded symbols will be allowed before a cluster is deemed to be complete and the impulse noise event over.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2ExtInmConfProfVtucIATO 1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.6
The INM Inter Arrival Time Offset for the IAT anomaly generation. The valid values for INMIATO range from 3 from 511 DMT symbols in steps of 1 DMT symbol.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2ExtInmConfProfVturIATO 1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.7
The INM Inter Arrival Time Offset for the IAT anomaly generation. The valid values for INMIATO range from 3 from 511 DMT symbols in steps of 1 DMT symbol.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2ExtInmConfProfVtucIATS 1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.8
The INM Inter Arrival Time Step for the IAT anomaly generation. The valid values for INMIATS range from 0 from 7 in steps. The range of values of inter-arrival times recorded in a single bin is 2^(INMIATS). All inter-arrival times greater than or equal to INMIATO+6*(2^INMIATS) are recorded in the 7th bin of INMAIAT.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2ExtInmConfProfVturIATS 1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.9
The INM Inter Arrival Time Step for the IAT anomaly generation. The valid values for INMIATS range from 0 from 7 in steps. The range of values of inter-arrival times recorded in a single bin is 2^(INMIATS). All inter-arrival times greater than or equal to INMIATO+6*(2^INMIATS) are recorded in the 7th bin of INMAIAT.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

xdsl2ExtInmConfProfRowStatus 1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.14
This object is used to create a new row or to modify or delete an existing row in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

xdsl2ExtInmConfProfPortList 1.3.6.1.4.1.890.1.5.12.46.60.5.1.7.1.15
A port list that indicates which ports this profile applys for.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

xdsl2MaxNumInmConfProfile 1.3.6.1.4.1.890.1.5.12.46.60.5.1.8
The maximum number of VDSL Inm profile.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2ExtChConfProfileTable 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1
The table xdsl2ExtChConfProfileTable extends xdsl2ExtChConfProfileTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtChConfProfileEntry

xdsl2ExtChConfProfileEntry 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1
The table xdsl2ExtChConfProfileTable extends xdsl2ExtChConfProfileTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtChConfProfileEntry  

xdsl2ChConfProfPhyRDs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.1
This configuration parameter defines phy retransmission mode on downstream direction. If auto mode is selected, PhyR will be disabled if the net data rate in PhyR mode will be lower than in non-PhyR mode under current loop condition and framing paramters. The possible values are: disable(0), enable(1), auto(2)
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfPhyRUs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.2
This configuration parameter defines phy retransmission mode on upstream direction. If auto mode is selected, PhyR will be disabled if the net data rate in PhyR mode will be lower than in non-PhyR mode under current loop condition and framing paramters. The possible values are: disable(0), enable(1), auto(2)
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfPortList 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.3
A port list that indicates which ports this profile applys for.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

xdsl2ChConfProfGinpRtxModeDs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.4
G.inp(G.998.4) support setting on downstream direction. The possible values are: forbidden(0) - Support for G998.4 is disabled. preferred(1) - If G998.4 is supported by the far-end, it is enabled. forced(2) - The line will only train if G998.4 can be enabled. test(3) - G998.4 is enabled in test mode (refer to G998.4, Clause 10.4).
Status: current Access: read-create
OBJECT-TYPE    
  Xdsl2ConfigRtxMode  

xdsl2ChConfProfGinpRtxModeUs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.5
G.inp(G.998.4) support setting on upstream direction. The possible values are: forbidden(0) - Support for G998.4 is disabled. preferred(1) - If G998.4 is supported by the far-end, it is enabled. forced(2) - The line will only train if G998.4 can be enabled. test(3) - G998.4 is enabled in test mode (refer to G998.4, Clause 10.4).
Status: current Access: read-create
OBJECT-TYPE    
  Xdsl2ConfigRtxMode  

xdsl2ChConfProfGinpEtrMaxDs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.6
Defines the maximum allowed value for the ETR (Effective Throughput Rate).
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfGinpEtrMaxUs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.7
Defines the maximum allowed value for the ETR (Effective Throughput Rate).
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfGinpEtrMinDs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.8
Defines the minimum value for the ETR (Effective Throughput Rate).
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfGinpEtrMinUs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.9
Defines the minimum value for the ETR (Effective Throughput Rate).
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfGinpNdrMaxDs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.10
Overrules the wanted maximum data rate provided in the SetLineTrafficConfiguration
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfGinpNdrMaxUs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.11
Overrules the wanted maximum data rate provided in the SetLineTrafficConfiguration
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfGinpShineRatioDs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.12
The loss of rate in a 1 second interval expressed as a fraction of NDR due to a SHINE impulse noise environment expected by the operator to occur at a probability acceptable for the services. The valid values are all multiples of 0.001 from 0 to 0.1.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfGinpShineRatioUs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.13
The loss of rate in a 1 second interval expressed as a fraction of NDR due to a SHINE impulse noise environment expected by the operator to occur at a probability acceptable for the services. The valid values are all multiples of 0.001 from 0 to 0.1.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfGinpLeftrThresholdDs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.14
The threshold used to declare leftr defects (see clause 11.3.3) expressed in fraction of the NDR. The value 0 is a special value to indicate that the receiver shall use a special value for declaring leftr defect . The minimum valid threshold to declare leftr is ETR/2. The receiver shall ignore threshold values that are less than the minimum and shall use ETR/2 for declaring leftr defect instead (see clause 11.3.3). The valid values are all multiples of 0.01 from 0 to 0.99.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfGinpLeftrThresholdUs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.15
The threshold used to declare leftr defects (see clause 11.3.3) expressed in fraction of the NDR. The value 0 is a special value to indicate that the receiver shall use a special value for declaring leftr defect . The minimum valid threshold to declare leftr is ETR/2. The receiver shall ignore threshold values that are less than the minimum and shall use ETR/2 for declaring leftr defect instead (see clause 11.3.3). The valid values are all multiples of 0.01 from 0 to 0.99.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfGinpMaxDelayDs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.16
The maximum allowed delay for retransmission.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfGinpMaxDelayUs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.17
The maximum allowed delay for retransmission.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfGinpMinDelayDs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.18
The minimum allowed delay for retransmission.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfGinpMinDelayUs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.19
The minimum allowed delay for retransmission.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfGinpInpMinDs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.20
Minimum impulse noise protection (INP) against SHINE in DMT symbols. The possible values are: 0-31
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfGinpInpMinUs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.21
Minimum impulse noise protection (INP) against SHINE in DMT symbols. The possible values are: 0-31
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfGinpReinCfgInpDs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.22
Minimum impulse protection against electrical repetitive impulse noise (REIN) in DMT symbols. The possible values are: 0-7
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfGinpReinCfgInpUs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.23
Minimum impulse protection against electrical repetitive impulse noise (REIN) in DMT symbols. The possible values are: 0-7
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfGinpReinCfgFreqDs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.24
Configuration indicating the frequency of REIN. The possible values are: 100 - 100Hz 120 - 120Hz
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfGinpReinCfgFreqUs 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.25
Configuration indicating the frequency of REIN. The possible values are: 100 - 100Hz 120 - 120Hz
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfSosMinRateB0Ds 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.26
This parameter specifies the minimum net data rate required for a valid SOS request in the downstream direction. The value shall be coded as an unsigned integer representing the data rate as a multiple of 8 kbit/s.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2ChConfProfSosMinRateB0Us 1.3.6.1.4.1.890.1.5.12.46.60.5.2.1.1.27
This parameter specifies the minimum net data rate required for a valid SOS request in the downstream direction. The value shall be coded as an unsigned integer representing the data rate as a multiple of 8 kbit/s.
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

xdsl2MaxNumChConfProfile 1.3.6.1.4.1.890.1.5.12.46.60.5.2.2
The maximum number of VDSL channel profile.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2ExtLineAlarmConfTemplateTable 1.3.6.1.4.1.890.1.5.12.46.60.5.3.1
The table xdsl2ExtLineAlarConfTemplateTable extends xdsl2ExtLineAlarConfTemplateTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtLineAlarmConfTemplateEntry

xdsl2ExtLineAlarmConfTemplateEntry 1.3.6.1.4.1.890.1.5.12.46.60.5.3.1.1
The table xdsl2ExtLineAlarConfTemplateTable extends xdsl2ExtLineAlarConfTemplateTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtLineAlarmConfTemplateEntry  

xdsl2LAlarmConfTempPortList 1.3.6.1.4.1.890.1.5.12.46.60.5.3.1.1.3
A port list that indicates which ports this template applys for.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

xdsl2ExtLineAlarmConfProfileTable 1.3.6.1.4.1.890.1.5.12.46.60.5.3.2
The table xdsl2ExtLineAlarmConfProfileTable extends xdsl2LineAlarmConfProfileTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtLineAlarmConfProfileEntry

xdsl2ExtLineAlarmConfProfileEntry 1.3.6.1.4.1.890.1.5.12.46.60.5.3.2.1
The table xdsl2ExtLineAlarmConfProfileTable extends xdsl2LineAlarmConfProfileTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtLineAlarmConfProfileEntry  

xdsl2LineAlarmConfProfileXtucThresh15MinLofs 1.3.6.1.4.1.890.1.5.12.46.60.5.3.2.1.1
A threshold for the xdsl2PMLCurr15MLofs counter, when xdsl2PMLCurrUnit is xtuc {1}. The value 0 means that no threshold is specified for the associated counter.
Status: current Access: read-create
OBJECT-TYPE    
  HCPerfIntervalThreshold  

xdsl2LineAlarmConfProfileXturThresh15MinLofs 1.3.6.1.4.1.890.1.5.12.46.60.5.3.2.1.2
A threshold for the xdsl2PMLCurr15MLofs counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter.
Status: current Access: read-create
OBJECT-TYPE    
  HCPerfIntervalThreshold  

xdsl2LAlarmConfProfilePortList 1.3.6.1.4.1.890.1.5.12.46.60.5.3.2.1.3
A port list that indicates which ports this profile applys for.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

xdsl2LineAlarmConfProfileXturThresh15MinLprs 1.3.6.1.4.1.890.1.5.12.46.60.5.3.2.1.4
A threshold for the xdsl2PMLCurr15MLprs counter, when xdsl2PMLCurrUnit is xtur {2}. The value 0 means that no threshold is specified for the associated counter.
Status: current Access: read-create
OBJECT-TYPE    
  HCPerfIntervalThreshold  

xdsl2ExtChAlarmConfProfileTable 1.3.6.1.4.1.890.1.5.12.46.60.5.3.3
The table xdsl2ExtChAlarmConfProfileTable extends xdsl2ExtChAlarmConfProfileTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Xdsl2ExtChAlarmConfProfileEntry

xdsl2ExtChAlarmConfProfileEntry 1.3.6.1.4.1.890.1.5.12.46.60.5.3.3.1
The table xdsl2ExtChAlarmConfProfileTable extends xdsl2ExtChAlarmConfProfileTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  Xdsl2ExtChAlarmConfProfileEntry  

xdsl2ChAlarmConfProfilePortList 1.3.6.1.4.1.890.1.5.12.46.60.5.3.3.1.3
A port list that indicates which ports this profileapplys for.
Status: current Access: read-only
OBJECT-TYPE    
  PortList  

xdsl2MaxNumLineAlarmConfTemplate 1.3.6.1.4.1.890.1.5.12.46.60.5.3.4
The maximum number of VDSL alarm template.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2MaxNumLineAlarmConfProfile 1.3.6.1.4.1.890.1.5.12.46.60.5.3.5
The maximum number of VDSL line alarm profile.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2MaxNumChAlarmConfProfile 1.3.6.1.4.1.890.1.5.12.46.60.5.3.6
The maximum number of VDSL channel alarm profile.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

xdsl2LinePerfLOFSThreshXtuc 1.3.6.1.4.1.890.1.5.12.46.60.0.1
This notification indicates that the LOF seconds threshold has been reached/exceeded for the referred xTU-C.
Status: current Access: read-only
NOTIFICATION-TYPE    

xdsl2LinePerfLOFSThreshXtur 1.3.6.1.4.1.890.1.5.12.46.60.0.2
This notification indicates that the LOF seconds threshold has been reached/exceeded for the referred xTU-R.
Status: current Access: read-only
NOTIFICATION-TYPE    

xdsl2LinePerfLPRSThreshXtur 1.3.6.1.4.1.890.1.5.12.46.60.0.3
This notification indicates that the LPR seconds threshold has been reached/exceeded for the referred xTU-R.
Status: current Access: read-only
NOTIFICATION-TYPE    

macBasedVlanSetup 1.3.6.1.4.1.890.1.5.12.46.61
OBJECT IDENTIFIER    

macBasedVlanTable 1.3.6.1.4.1.890.1.5.12.46.61.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MacBasedVlanEntry

macBasedVlanEntry 1.3.6.1.4.1.890.1.5.12.46.61.1.1
An entry in macBasedVlanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacBasedVlanEntry  

macBasedVlanName 1.3.6.1.4.1.890.1.5.12.46.61.1.1.1
Name of Mac-Based Vlan.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

macBasedVlanMAC 1.3.6.1.4.1.890.1.5.12.46.61.1.1.2
Mac address for Mac-Based Vlan
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

macBasedVlanVlanId 1.3.6.1.4.1.890.1.5.12.46.61.1.1.3
Vlan id for Mac-Based Vlan, 1~4094.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

macBasedVlan8021pPriority 1.3.6.1.4.1.890.1.5.12.46.61.1.1.4
802.1p priority for Mac-Based Vlan, 0~7.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

macBasedVlanRowstatus 1.3.6.1.4.1.890.1.5.12.46.61.1.1.5
Row Status for Mac-Based Vlan
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vlanProfileSetup 1.3.6.1.4.1.890.1.5.12.46.62
OBJECT IDENTIFIER    

vlanProfileTable 1.3.6.1.4.1.890.1.5.12.46.62.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanProfileEntry

vlanProfileEntry 1.3.6.1.4.1.890.1.5.12.46.62.1.1
An entry in vlanProfileTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanProfileEntry  

vlanProfileName 1.3.6.1.4.1.890.1.5.12.46.62.1.1.1
Name of vlan Profile.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

vlanProfileMacLearning 1.3.6.1.4.1.890.1.5.12.46.62.1.1.2
Mac learning for vlan profile
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

vlanProfileUnknownMulticastDrop 1.3.6.1.4.1.890.1.5.12.46.62.1.1.3
Drop unknown multicast packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

vlanProfileRowStatus 1.3.6.1.4.1.890.1.5.12.46.62.1.1.4
Row status for vlan profile
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vlanTable 1.3.6.1.4.1.890.1.5.12.46.62.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanEntry

vlanEntry 1.3.6.1.4.1.890.1.5.12.46.62.2.1
An entry in vlanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanEntry  

profileName 1.3.6.1.4.1.890.1.5.12.46.62.2.1.1
Name of vlan Profile.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

dosPreventionSetup 1.3.6.1.4.1.890.1.5.12.46.63
OBJECT IDENTIFIER    

dosPreventionActive 1.3.6.1.4.1.890.1.5.12.46.63.1
DoS prevention enabled/disabled for the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

dosPreventionMacChecking 1.3.6.1.4.1.890.1.5.12.46.63.4
Checking MAC enabled/disabled for the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

dosPreventionIPChecking 1.3.6.1.4.1.890.1.5.12.46.63.5
Checking IP enabled/disabled for the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

dosPreventionICMPFragment 1.3.6.1.4.1.890.1.5.12.46.63.9
Dropping fragmented ICMP packets enabled/disabled for the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

dosPreventionTCPSYN 1.3.6.1.4.1.890.1.5.12.46.63.11
Checking TCP SYN packets enabled/disabled for the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

dosPreventionTCPFragment 1.3.6.1.4.1.890.1.5.12.46.63.13
Dropping fragmented TCP packets with offset value of 1 enabled/disabled for the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

dosPreventionTCPControlSN 1.3.6.1.4.1.890.1.5.12.46.63.14
Dropping TCP packets with control flag of 0 and sequence number of 0 enabled/disabled for the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

dosPreventionTCPPort 1.3.6.1.4.1.890.1.5.12.46.63.15
Checking TCP port enabled/disabled for the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

dosPreventionTCPSF 1.3.6.1.4.1.890.1.5.12.46.63.16
Checking TCP packets with SYN and FIN bits enabled/disabled for the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

dosPreventionTCPFUP 1.3.6.1.4.1.890.1.5.12.46.63.17
Checking TCP packets with FIN, URG, PSH bits and sequence number enabled/disabled for the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

dosPreventionUDPPort 1.3.6.1.4.1.890.1.5.12.46.63.18
Checking UDP port enabled/disabled for the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

ipv6Setup 1.3.6.1.4.1.890.1.5.12.46.65
OBJECT IDENTIFIER    

ipv6DefaultMgmt 1.3.6.1.4.1.890.1.5.12.46.65.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER in-band(0), out-of-band(1)  

inbandIpv6Setup 1.3.6.1.4.1.890.1.5.12.46.65.3
OBJECT IDENTIFIER    

inbandIpv6Vid 1.3.6.1.4.1.890.1.5.12.46.65.3.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

inbandIpv6StaticIp 1.3.6.1.4.1.890.1.5.12.46.65.3.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  Ipv6Address  

inbandIpv6StaticSubnetMask 1.3.6.1.4.1.890.1.5.12.46.65.3.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  Ipv6Address  

inbandIpv6StaticGateway 1.3.6.1.4.1.890.1.5.12.46.65.3.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  Ipv6Address  

outOfBandIpv6Setup 1.3.6.1.4.1.890.1.5.12.46.65.4
OBJECT IDENTIFIER    

outOfBandIpv6Ip 1.3.6.1.4.1.890.1.5.12.46.65.4.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  Ipv6Address  

outOfBandIpv6SubnetMask 1.3.6.1.4.1.890.1.5.12.46.65.4.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  Ipv6Address  

outOfBandIpv6Gateway 1.3.6.1.4.1.890.1.5.12.46.65.4.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  Ipv6Address  

l2ptSetup 1.3.6.1.4.1.890.1.5.12.46.115
OBJECT IDENTIFIER    

l2ptState 1.3.6.1.4.1.890.1.5.12.46.115.1
L2PT feature enabled/disabled for the switch
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

l2ptMacAddr 1.3.6.1.4.1.890.1.5.12.46.115.2
L2PT destination mac address
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

l2ptTable 1.3.6.1.4.1.890.1.5.12.46.115.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    L2ptEntry

l2ptEntry 1.3.6.1.4.1.890.1.5.12.46.115.3.1
An entry in l2ptTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  L2ptEntry  

l2ptProtocolGroup 1.3.6.1.4.1.890.1.5.12.46.115.3.1.1
L2PT protocols enabled/disabled on the port
Status: current Access: read-write
OBJECT-TYPE    
  BITS cDP(0), sTP(1), vTP(2)  

l2ptPointToPointProtocolGroup 1.3.6.1.4.1.890.1.5.12.46.115.3.1.2
L2PT point-to-point protocols enabled/disabled on the port
Status: current Access: read-write
OBJECT-TYPE    
  BITS pAGP(0), lACP(1), uDLD(2)  

l2ptMode 1.3.6.1.4.1.890.1.5.12.46.115.3.1.3
L2PT port role on the port
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER access(1), tunnel(2)  

vlanMappingSetup 1.3.6.1.4.1.890.1.5.12.46.116
OBJECT IDENTIFIER    

vlanMappingState 1.3.6.1.4.1.890.1.5.12.46.116.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

vlanMappingPortTable 1.3.6.1.4.1.890.1.5.12.46.116.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanMappingPortEntry

vlanMappingPortEntry 1.3.6.1.4.1.890.1.5.12.46.116.2.1
An entry in vlanMappingPortTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanMappingPortEntry  

vlanMappingPortState 1.3.6.1.4.1.890.1.5.12.46.116.2.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

vlanMappingPortDropMiss 1.3.6.1.4.1.890.1.5.12.46.116.2.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

vlanMappingRuleTable 1.3.6.1.4.1.890.1.5.12.46.116.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VlanMappingRuleEntry

vlanMappingRuleEntry 1.3.6.1.4.1.890.1.5.12.46.116.3.1
An entry in vlan-mapping rule table
Status: current Access: not-accessible
OBJECT-TYPE    
  VlanMappingRuleEntry  

vlanMappingRuleName 1.3.6.1.4.1.890.1.5.12.46.116.3.1.1
The name of vlan-mapping entry
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

vlanMappingRulePort 1.3.6.1.4.1.890.1.5.12.46.116.3.1.2
interface port id
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vlanMappingRuleVid 1.3.6.1.4.1.890.1.5.12.46.116.3.1.3
inner vid
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vlanMappingRuleTransVid 1.3.6.1.4.1.890.1.5.12.46.116.3.1.4
translated vid
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vlanMappingRulePriority 1.3.6.1.4.1.890.1.5.12.46.116.3.1.5
priority
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER priority-0(0), priority-1(1), priority-2(2), priority-3(3), priority-4(4), priority-5(5), priority-6(6), priority-7(7)  

vlanMappingRuleRowStatus 1.3.6.1.4.1.890.1.5.12.46.116.3.1.6
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

vlanMappingRuleReplacePrio 1.3.6.1.4.1.890.1.5.12.46.116.3.1.7
Replace Original Priority
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

transceiverInfo 1.3.6.1.4.1.890.1.5.12.46.117
OBJECT IDENTIFIER    

transceiverSerialInfoTable 1.3.6.1.4.1.890.1.5.12.46.117.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TransceiverSerialInfoEntry

transceiverSerialInfoEntry 1.3.6.1.4.1.890.1.5.12.46.117.1.1
An entry in transceiverSerialInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  TransceiverSerialInfoEntry  

transceiverSerialInfoEntryPort 1.3.6.1.4.1.890.1.5.12.46.117.1.1.1
Index of transceiverSerialInfo. It is referred to dot1dBasePort
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

transceiverSerialInfoEntryStatus 1.3.6.1.4.1.890.1.5.12.46.117.1.1.2
Transceiver module status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ok-with-DDM(1), ok-without-DDM(2), nonoperational(3)  

transceiverSerialInfoEntryVendor 1.3.6.1.4.1.890.1.5.12.46.117.1.1.3
Transceiver module vendor name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

transceiverSerialInfoEntryPartNo 1.3.6.1.4.1.890.1.5.12.46.117.1.1.4
Part number provided by transceiver module vendor.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

transceiverSerialInfoEntrySerialNo 1.3.6.1.4.1.890.1.5.12.46.117.1.1.5
Serial number provided by transceiver module vendor.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

transceiverSerialInfoEntryRevision 1.3.6.1.4.1.890.1.5.12.46.117.1.1.6
Revision level for part number provided by transceiver module vendor.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

transceiverSerialInfoEntryDateCode 1.3.6.1.4.1.890.1.5.12.46.117.1.1.7
Transceiver module vendor's manufacturing date code
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

transceiverSerialInfoEntryTransceiver 1.3.6.1.4.1.890.1.5.12.46.117.1.1.8
Transceiver module type names
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

transceiverDdmInfoTable 1.3.6.1.4.1.890.1.5.12.46.117.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TransceiverDdmInfoEntry

transceiverDdmInfoEntry 1.3.6.1.4.1.890.1.5.12.46.117.2.1
An entry in transceiverDdmInfoTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  TransceiverDdmInfoEntry  

transceiverDdmInfoEntryPort 1.3.6.1.4.1.890.1.5.12.46.117.2.1.1
Index of transceiverDdmInfo. This will be referred to dot1dBasePort
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

transceiverDdmInfoEntryType 1.3.6.1.4.1.890.1.5.12.46.117.2.1.2
Transceiver module status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER temperature(1), voltage(2), txbias(3), txPower(4), rxPower(5)  

transceiverDdmInfoEntryAlarmMax 1.3.6.1.4.1.890.1.5.12.46.117.2.1.3
Default Transceiver high alarm threshold.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

transceiverDdmInfoEntryAlarmMin 1.3.6.1.4.1.890.1.5.12.46.117.2.1.4
Default Transceiver low alarm threshold.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

transceiverDdmInfoEntryWarnMax 1.3.6.1.4.1.890.1.5.12.46.117.2.1.5
Default Transceiver high warning threshold.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

transceiverDdmInfoEntryWarnMin 1.3.6.1.4.1.890.1.5.12.46.117.2.1.6
Default Transceiver low warning threshold.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

transceiverDdmInfoEntryCurrent 1.3.6.1.4.1.890.1.5.12.46.117.2.1.7
Transceiver current value.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

transceiverDdmInfoEntryDescription 1.3.6.1.4.1.890.1.5.12.46.117.2.1.8
Transceiver module type names
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

vturSwitchStatus 1.3.6.1.4.1.890.1.5.12.46.118
OBJECT IDENTIFIER    

vturLayer2Status 1.3.6.1.4.1.890.1.5.12.46.118.1
OBJECT IDENTIFIER    

layer2StatusTable 1.3.6.1.4.1.890.1.5.12.46.118.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Layer2StatusEntry

layer2StatusEntry 1.3.6.1.4.1.890.1.5.12.46.118.1.1.1
An entry in layer2Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Layer2StatusEntry  

vturIgmpSnoopingStatus 1.3.6.1.4.1.890.1.5.12.46.118.1.1.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

vturUnknownMulticastStatus 1.3.6.1.4.1.890.1.5.12.46.118.1.1.1.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER block(1), forward(2)  

vturPortStatus 1.3.6.1.4.1.890.1.5.12.46.118.2
OBJECT IDENTIFIER    

portStatusTable 1.3.6.1.4.1.890.1.5.12.46.118.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortStatusEntry

portStatusEntry 1.3.6.1.4.1.890.1.5.12.46.118.2.1.1
An entry in portTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PortStatusEntry  

portStatusNumber 1.3.6.1.4.1.890.1.5.12.46.118.2.1.1.1
Display all ports we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

portStatusOperStatus 1.3.6.1.4.1.890.1.5.12.46.118.2.1.1.3
CPE port's current status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

portStatusOperSpeed 1.3.6.1.4.1.890.1.5.12.46.118.2.1.1.8
CPE port's current speed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER linkdown(0), autoneg(1), half-10M(2), full-10M(3), half-100M(4), full-100M(5)  

vturWanStatus 1.3.6.1.4.1.890.1.5.12.46.118.4
OBJECT IDENTIFIER    

vturWanInfo 1.3.6.1.4.1.890.1.5.12.46.118.4.1
OBJECT IDENTIFIER    

vturWanStatusTable 1.3.6.1.4.1.890.1.5.12.46.118.4.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturWanStatusEntry

vturWanStatusEntry 1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1
An entry in vturWanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturWanStatusEntry  

vturWanStatusIndex 1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.1
Display the wan index range from 1 to 4 we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWanStatusVlanTagging 1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.2
Display the vlan tagging we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), vlan-mux(2), auto-vlan(3)  

vturWanStatusVlanID 1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.3
Display the vlan id range from 1 to 4094 we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWanStatus8021p 1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.4
Display the 802.1p value range from 0 to 7 we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWanStatusPPPUsername 1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.5
Display the PPP username we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vturWanStatusPPPPassword 1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.6
Display the PPP password we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vturWanStatusProtocol 1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.7
Display the wan protocol info we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER pppoe(1), mer(2), bridge(3)  

vturWanStatusProtocolSetting 1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.8
Display the wan service enable/disable status we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  BITS dhcp-client-(0), nat(1), firewall(2), igmp(3)  

vturWanStatusIP 1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.9
Display the wan IP setting we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vturWanStatusSubnetMask 1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.10
Display the wan subnet mask we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vturWanStatusService 1.3.6.1.4.1.890.1.5.12.46.118.4.1.1.1.11
Display the wan service enable/disable status we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  EnabledStatus  

vturWanStatusCommon 1.3.6.1.4.1.890.1.5.12.46.118.4.2
OBJECT IDENTIFIER    

vturWanStatusCommonTable 1.3.6.1.4.1.890.1.5.12.46.118.4.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturWanStatusCommonEntry

vturWanStatusCommonEntry 1.3.6.1.4.1.890.1.5.12.46.118.4.2.1.1
An entry in vturWanCommonTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturWanStatusCommonEntry  

vturWanStatusCommonQoS 1.3.6.1.4.1.890.1.5.12.46.118.4.2.1.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  EnabledStatus  

vturWanStatusCommonEnableAutoDefaultGateway 1.3.6.1.4.1.890.1.5.12.46.118.4.2.1.1.2
Display the enable auto default gateay setting we get from CPE side
Status: current Access: read-only
OBJECT-TYPE    
  EnabledStatus  

vturWanStatusCommonDefaultGatewayIP 1.3.6.1.4.1.890.1.5.12.46.118.4.2.1.1.3
Display the default gateway setting we get from CPE side
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vturWanStatusCommonVitualPortEnable 1.3.6.1.4.1.890.1.5.12.46.118.4.2.1.1.4
Display Enable/Disable virtual port on eth1 setting we get on CPE side
Status: current Access: read-only
OBJECT-TYPE    
  EnabledStatus  

vturClassificationStatus 1.3.6.1.4.1.890.1.5.12.46.118.5
OBJECT IDENTIFIER    

vturClassificationStatusTable 1.3.6.1.4.1.890.1.5.12.46.118.5.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturClassificationStatusEntry

vturClassificationStatusEntry 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1
An entry in vturClassificationTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturClassificationStatusEntry  

vturClassificationStatusIndex 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.1
Display the classification index range from 1 to 8 we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturClassificationStatusRuleEnable 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.2
Display the classification enable/disable status we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  EnabledStatus  

vturClassificationStatusWanInterface 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.3
Display the wan interface index range from 1 to 4 we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturClassificationStatusQueue 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.4
Display the assigned queue (1-4)802.1p value we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturClassificationStatus8021p 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.5
Mark 802.1p if 802.1q is enabled [0-7]
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturClassificationStatusVid 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.6
Display the 802.1Q VLAN ID: [1-4094]
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturClassificationStatusFilterPhysicalPort 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.7
Physical LAN Port number
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturClassificationStatusFilterProtocol 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.8
Protocol: [TCP/UDP, TCP, UDP, ICMP] 1-4
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER tcp-udp(1), tcp(2), udp(3), icmp(4)  

vturClassificationStatusFilterSourceIP 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.9
Display the filtering source IP we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vturClassificationStatusFilterSourceSubnetMask 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.10
Display the filtering source subnet mask we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vturClassificationStatusFilterDestinationIP 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.11
Display the filtering destination IP we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vturClassificationStatusFilterDestinationSubnetMask 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.12
Display the filtering destination subnet mask we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vturClassificationStatusFilterSourcePortStart 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.13
Display the filtering source port start we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturClassificationStatusFilterSourcePortEnd 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.14
Display the filtering source port end we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturClassificationStatusFilterDestinationPortStart 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.15
Display the filtering destination port start we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturClassificationStatusFilterDestinationPortEnd 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.16
Display the filtering destination end port we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturClassificationStatusFilterSourceMACAddr 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.17
Display the filtering source MAC addr we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vturClassificationStatusFilterSourceMACMask 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.18
Display the filtering source MAC mask we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vturClassificationStatusFilterDestinationMACAddr 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.19
Display the filtering destination MAC addr we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vturClassificationStatusFilterDestinationMACMask 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.20
Display the filtering destination MAC mask we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vturClassificationStatusFilter8021p 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.21
Display the filtering 802.1p value we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturClassificationStatusFilterProtocolType 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.22
Display the filtering protocol type we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturClassificationStatusPolicyGatewayIP 1.3.6.1.4.1.890.1.5.12.46.118.5.1.1.23
Display the filtering protocol type we got in CPE side
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vturAPStatus 1.3.6.1.4.1.890.1.5.12.46.118.7
OBJECT IDENTIFIER    

vturAPGeneralStatus 1.3.6.1.4.1.890.1.5.12.46.118.7.1
OBJECT IDENTIFIER    

vturAPGeneralStatusTable 1.3.6.1.4.1.890.1.5.12.46.118.7.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturAPGeneralStatusEntry

vturAPGeneralStatusEntry 1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1
An entry in VTUR AP General Statistics Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturAPGeneralStatusEntry  

vturLanRxBytes 1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.1
Received bytes on LAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturLanRxPkts 1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.2
Received frames on LAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturLanTxBytes 1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.3
Transmitted bytes on LAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturLanTxPkts 1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.4
Transmitted frames on LAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturVdslRxBytes 1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.5
Received bytes on VDSL
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturVdslRxPkts 1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.6
Received frames on VDSL
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturVdslTxBytes 1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.7
Transmitted bytes on VDSL
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturVdslTxPkts 1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.8
Transmitted frames on VDSL
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturWlanRxBytes 1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.9
Received bytes on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturWlanRxPkts 1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.10
Received frames on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturWlanRxErrs 1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.11
Received error frames on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturWlanRxDrops 1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.12
Received drop frames on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturWlanTxBytes 1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.13
Transmitted bytes on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturWlanTxPkts 1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.14
Transmitted frames on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturWlanTxErrs 1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.15
Transmitted error frames on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturWlanTxDrops 1.3.6.1.4.1.890.1.5.12.46.118.7.1.1.1.16
Transmitted drop frames on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturAPPerSSIDStatusTable 1.3.6.1.4.1.890.1.5.12.46.118.7.1.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturAPPerSSIDStatusEntry

vturAPPerSSIDStatusEntry 1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1
An entry in VTUR AP Per-SSID Statistics Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturAPPerSSIDStatusEntry  

vturWlanPerSSIDStatusIndex 1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1.1
Index of vturAPPerSSIDStatusTable
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanPerSSIDStatusSSID 1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1.2
WLAN SSID
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

vturWlanPerSSIDRxBytes 1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1.3
Received bytes on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturWlanPerSSIDRxPkts 1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1.4
Received frames on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturWlanPerSSIDRxErrs 1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1.5
Received error frames on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturWlanPerSSIDRxDrops 1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1.6
Received drop frames on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturWlanPerSSIDTxBytes 1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1.7
Transmitted bytes on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturWlanPerSSIDTxPkts 1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1.8
Transmitted frames on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturWlanPerSSIDTxErrs 1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1.9
Transmitted error frames on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturWlanPerSSIDTxDrops 1.3.6.1.4.1.890.1.5.12.46.118.7.1.2.1.10
Transmitted drop frames on WLAN
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

vturAPWlanStatus 1.3.6.1.4.1.890.1.5.12.46.118.7.2
OBJECT IDENTIFIER    

vturAPWlanStatusBasicTable 1.3.6.1.4.1.890.1.5.12.46.118.7.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturAPWlanStatusBasicEntry

vturAPWlanStatusBasicEntry 1.3.6.1.4.1.890.1.5.12.46.118.7.2.1.1
An entry in VTUR AP Wlan Basic Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturAPWlanStatusBasicEntry  

vturWlanEnable 1.3.6.1.4.1.890.1.5.12.46.118.7.2.1.1.1
Display the current WLAN status 0:Disable WLAN 1:Enable WLAN
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanSsid 1.3.6.1.4.1.890.1.5.12.46.118.7.2.1.1.2
SSID of the AP
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

vturWlanBssid 1.3.6.1.4.1.890.1.5.12.46.118.7.2.1.1.3
Mac address of AP
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

vturWlanHidden 1.3.6.1.4.1.890.1.5.12.46.118.7.2.1.1.4
Display the current AP's SSID status 0: not hide AP's SSID 1: hide AP's SSID
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanChannel 1.3.6.1.4.1.890.1.5.12.46.118.7.2.1.1.5
Channel number of the AP
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanMode 1.3.6.1.4.1.890.1.5.12.46.118.7.2.1.1.6
Display the current AP's mode 1: B or G mix mode 2: Pure G mode 3: Pure B mode
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanTxPower 1.3.6.1.4.1.890.1.5.12.46.118.7.2.1.1.7
Display the current Transmit power 1: 30 mW 2: 15 mW
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanMulticastRate 1.3.6.1.4.1.890.1.5.12.46.118.7.2.1.1.8
Transmit rate of multicast packets. If the value not zero, transmit rate is value * 500kbps 0: auto 2, 4, 11, 22: Transmit rate = 1, 2, 5.5, 11 Mbps when mode = pure B mode 12, 18, 24, 36, 48, 96, 108: Transmit rate = 6, 9, 12, 18, 24, 36, 48, 54 Mbps when mode = pure G mode2, 4, 11, 12, 18, 22, 24, 36, 48, 96, 108: Transmit rate = 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps when mode = B or G mix mode
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturAPWlanStatusSecurityTable 1.3.6.1.4.1.890.1.5.12.46.118.7.2.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturAPWlanStatusSecurityEntry

vturAPWlanStatusSecurityEntry 1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1
An entry in VTUR AP Wlan Security Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturAPWlanStatusSecurityEntry  

vturWlanSecurityMode 1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.1
Display the current Security Mode 1: No security 2: Static WEP 3: WPA-PSK 4: WPA 5: WPA2 6: WPA2-PSK
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanWepEncryp 1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.2
This field is for SecurityMode = static WEP. 1: 64-Bit 2: 128-Bit
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanKeyId 1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.3
This field is for SecurityMode = static WEP. It indicate which key will be used for encryption. If KeyId is equal to 1, AP will use Key1 to encrypt frame.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanKey1 1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.4
This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key1 will be 10 heximal digits. If WEPEncryp is 128-Bit, key1 will be 26 heximal digits.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

vturWlanKey2 1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.5
This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key2 will be 10 heximal digits. If WEPEncryp is 128-Bit, key2 will be 26 heximal digits.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

vturWlanKey3 1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.6
This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key3 will be 10 heximal digits. If WEPEncryp is 128-Bit, key3 will be 26 heximal digits.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

vturWlanKey4 1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.7
This field is for SecurityMode = static WEP. If WEPEncryp is 64-Bit, key4 will be 10 heximal digits. If WEPEncryp is 128-Bit, key4 will be 26 heximal digits.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

vturWlanPsk 1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.8
This field is for SecurityMode = WPA-PSK or WPA2-PSK. It means Pre-Shared Key
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

vturWlanWpaMix 1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.9
This field is for SecurityMode = WPA2 or WPA2-PSK. When WPAMix is enable on WPA2, stations with WPA2-AES or WPA-TKIP could connect to AP. When WPAMix is enable on WPA2-PSK, stations with WPA2-PSK-AES or WPA-PSK-TKIP could connect to AP. 0: disable 1: enable
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanReAuthTime 1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.10
This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will trigger re-authentication with station every [ReAuthTime] seconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanIdleTime 1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.11
This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will flush stations information if there are no packets from station for [idleTime] seconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanGtkTime 1.3.6.1.4.1.890.1.5.12.46.118.7.2.2.1.12
This field is for SecurityMode = WPA-PSK, WPA2-PSK, WPA or WPA2. AP will trigger the update of group key with station every [GTKTime] seconds.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturAPWlanStatusRadiusTable 1.3.6.1.4.1.890.1.5.12.46.118.7.2.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturAPWlanStatusRadiusEntry

vturAPWlanStatusRadiusEntry 1.3.6.1.4.1.890.1.5.12.46.118.7.2.3.1
An entry in VTUR AP Wlan Security Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturAPWlanStatusRadiusEntry  

vturWlanAuthServIP 1.3.6.1.4.1.890.1.5.12.46.118.7.2.3.1.1
This field is the IP address of authentication server.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

vturWlanAuthServPort 1.3.6.1.4.1.890.1.5.12.46.118.7.2.3.1.2
This field is the port number of authentication server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanAuthServSecret 1.3.6.1.4.1.890.1.5.12.46.118.7.2.3.1.3
This field is the shared secret of authentication server.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

vturWlanAccServActive 1.3.6.1.4.1.890.1.5.12.46.118.7.2.3.1.4
This field is for activating or inactivating accounting server. 0: inactivate accounting server. 1: activate accounting server
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanAccServIP 1.3.6.1.4.1.890.1.5.12.46.118.7.2.3.1.5
This field is the IP address of accounting server.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

vturWlanAccServPort 1.3.6.1.4.1.890.1.5.12.46.118.7.2.3.1.6
This field is the port number of accounting server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanAccServSecret 1.3.6.1.4.1.890.1.5.12.46.118.7.2.3.1.7
This field is the shared secret of accounting server.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

vturAPWlanStatusMacFilter 1.3.6.1.4.1.890.1.5.12.46.118.7.2.4
OBJECT IDENTIFIER    

vturAPWlanStatusMacFilterTable 1.3.6.1.4.1.890.1.5.12.46.118.7.2.4.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturAPWlanStatusMacFilterEntry

vturAPWlanStatusMacFilterEntry 1.3.6.1.4.1.890.1.5.12.46.118.7.2.4.1.1
An entry in VTUR AP Wlan Mac Filter Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturAPWlanStatusMacFilterEntry  

vturWlanMacFltActive 1.3.6.1.4.1.890.1.5.12.46.118.7.2.4.1.1.1
Activate or inactivate wlan MAC filter. 0: Inactive 1: Active
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanMacFltAction 1.3.6.1.4.1.890.1.5.12.46.118.7.2.4.1.1.2
0: allow association for station which matches the address which is defined in MacFltAddr1~MacFltAddr8. 1: deny association for station which matches the address which is defined in MacFltAddr1~MacFltAddr8.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturAPWlanStatusMacFltAddrTable 1.3.6.1.4.1.890.1.5.12.46.118.7.2.4.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturAPWlanStatusMacFltAddrEntry

vturAPWlanStatusMacFltAddrEntry 1.3.6.1.4.1.890.1.5.12.46.118.7.2.4.2.1
An entry in VTUR AP Wlan Security Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturAPWlanStatusMacFltAddrEntry  

vturWlanFltStaIndex 1.3.6.1.4.1.890.1.5.12.46.118.7.2.4.2.1.1
The index for Mac filter
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanMacFltAddr 1.3.6.1.4.1.890.1.5.12.46.118.7.2.4.2.1.2
The address for Mac filter
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

vturAPWlanStatusStatisticsTable 1.3.6.1.4.1.890.1.5.12.46.118.7.2.5
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturAPWlanStatusStatisticsEntry

vturAPWlanStatusStatisticsEntry 1.3.6.1.4.1.890.1.5.12.46.118.7.2.5.1
An entry in VTUR AP Wlan Security Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturAPWlanStatusStatisticsEntry  

vturWlanInPkts 1.3.6.1.4.1.890.1.5.12.46.118.7.2.5.1.1
Same as WLANRxPkts in vturAPGeneral.vturAPGeneralStatistics MIB
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanInOctets 1.3.6.1.4.1.890.1.5.12.46.118.7.2.5.1.2
Same as WLANRxBytes in vturAPGeneral.vturAPGeneralStatistics MIB
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanInUCasts 1.3.6.1.4.1.890.1.5.12.46.118.7.2.5.1.3
Received unicast frames
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanInMCasts 1.3.6.1.4.1.890.1.5.12.46.118.7.2.5.1.4
Received multicast frames
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanRxFCSErrors 1.3.6.1.4.1.890.1.5.12.46.118.7.2.5.1.5
Same as WLANRxErrs in vturAPGeneral.vturAPGeneralStatistics MIB
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanOutPkts 1.3.6.1.4.1.890.1.5.12.46.118.7.2.5.1.6
Same as WLANTxPkts in vturAPGeneral.vturAPGeneralStatistics MIB
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanOutOctets 1.3.6.1.4.1.890.1.5.12.46.118.7.2.5.1.7
Same as WLANTxBytes in vturAPGeneral.vturAPGeneralStatistics MIB
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanOutUCasts 1.3.6.1.4.1.890.1.5.12.46.118.7.2.5.1.8
Transmitted unicast frames
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanOutMCasts 1.3.6.1.4.1.890.1.5.12.46.118.7.2.5.1.9
Transmitted multicast frames
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturAPWlanStatusStaListTable 1.3.6.1.4.1.890.1.5.12.46.118.7.2.6
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturAPWlanStatusStaListEntry

vturAPWlanStatusStaListEntry 1.3.6.1.4.1.890.1.5.12.46.118.7.2.6.1
An entry in VTUR AP Wlan Security Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturAPWlanStatusStaListEntry  

vturWlanStaIndex 1.3.6.1.4.1.890.1.5.12.46.118.7.2.6.1.1
The index of associated WLAN STA. Max = 32, Min = 1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturWlanStaMacAddr 1.3.6.1.4.1.890.1.5.12.46.118.7.2.6.1.2
The address of associated WLAN STA
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

vturConsoleStatus 1.3.6.1.4.1.890.1.5.12.46.118.8
OBJECT IDENTIFIER    

vturConsoleStatusTable 1.3.6.1.4.1.890.1.5.12.46.118.8.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturConsoleStatusEntry

vturConsoleStatusEntry 1.3.6.1.4.1.890.1.5.12.46.118.8.1.1
An entry in vturConsoleTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturConsoleStatusEntry  

vturConsoleStatusState 1.3.6.1.4.1.890.1.5.12.46.118.8.1.1.1
Display the current Console status 1: Enable console 2: Disable console
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

vturConsoleStatusAdminPassword 1.3.6.1.4.1.890.1.5.12.46.118.8.1.1.2
The operation for vtur device admin password
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vturConsoleStatusUserPassword 1.3.6.1.4.1.890.1.5.12.46.118.8.1.1.3
The operation for vtur device user password
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vturRemoteFunctionStatus 1.3.6.1.4.1.890.1.5.12.46.118.9
OBJECT IDENTIFIER    

remoteFunctionStatusTable 1.3.6.1.4.1.890.1.5.12.46.118.9.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RemoteFunctionStatusEntry

remoteFunctionStatusEntry 1.3.6.1.4.1.890.1.5.12.46.118.9.1.1
An entry in RemoteFunctionTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  RemoteFunctionStatusEntry  

telnetStatus 1.3.6.1.4.1.890.1.5.12.46.118.9.1.1.3
Display the current Telnet status 1: Enable All 2: Disable All 3: Enable LAN only 4: Enable WAN only
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable-all(1), disable-all(2), enable-lan-only(3), enable-wan-only(4)  

tftpStatus 1.3.6.1.4.1.890.1.5.12.46.118.9.1.1.4
Display the current TFTP status 1: Enable All 2: Disable All 3: Enable LAN only 4: Enable WAN only
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable-all(1), disable-all(2), enable-lan-only(3), enable-wan-only(4)  

webStatus 1.3.6.1.4.1.890.1.5.12.46.118.9.1.1.5
Display the current Web status 1: Enable All 2: Disable All 3: Enable LAN only 4: Enable WAN only
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable-all(1), disable-all(2), enable-lan-only(3), enable-wan-only(4)  

snmpStatus 1.3.6.1.4.1.890.1.5.12.46.118.9.1.1.6
Display the current SNMP status 1: Enable All 2: Disable All 3: Enable LAN only 4: Enable WAN only
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable-all(1), disable-all(2), enable-lan-only(3), enable-wan-only(4)  

sshStatus 1.3.6.1.4.1.890.1.5.12.46.118.9.1.1.7
Display the current SSH status 1: Enable All 2: Disable All 3: Enable LAN only 4: Enable WAN only
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable-all(1), disable-all(2), enable-lan-only(3), enable-wan-only(4)  

wirelessStatus 1.3.6.1.4.1.890.1.5.12.46.118.9.1.1.8
Display the current Wireless status 1: Disable 2: Enable
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

vturMacAddrStatus 1.3.6.1.4.1.890.1.5.12.46.118.10
OBJECT IDENTIFIER    

vturMacAddrTable 1.3.6.1.4.1.890.1.5.12.46.118.10.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturMacAddrEntry

vturMacAddrEntry 1.3.6.1.4.1.890.1.5.12.46.118.10.1.1
An entry in vturMacAddrTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturMacAddrEntry  

vturMacAddrIndex 1.3.6.1.4.1.890.1.5.12.46.118.10.1.1.1
The index of associated vtur STA. Max = 32, Min = 1
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturMacAddress 1.3.6.1.4.1.890.1.5.12.46.118.10.1.1.2
The address of associated vtur STA
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

vturLanStatus 1.3.6.1.4.1.890.1.5.12.46.118.11
OBJECT IDENTIFIER    

vturLanStatusTable 1.3.6.1.4.1.890.1.5.12.46.118.11.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturLanStatusEntry

vturLanStatusEntry 1.3.6.1.4.1.890.1.5.12.46.118.11.1.1
An entry in vturLanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturLanStatusEntry  

vturLanStatusIP 1.3.6.1.4.1.890.1.5.12.46.118.11.1.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vturLanStatusSubnetmask 1.3.6.1.4.1.890.1.5.12.46.118.11.1.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vturLanStatusDHCPOption 1.3.6.1.4.1.890.1.5.12.46.118.11.1.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable-dhcp-server(1), enable-dhcp-server(2), dhcp-server-relay(3)  

vturLanStatusDHCPServerStartIPAddr 1.3.6.1.4.1.890.1.5.12.46.118.11.1.1.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vturLanStatusDHCPServerEndIPAddr 1.3.6.1.4.1.890.1.5.12.46.118.11.1.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vturLanStatusDHCPServerSubnetmask 1.3.6.1.4.1.890.1.5.12.46.118.11.1.1.6
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vturLanStatusDHCPServerIPAddr 1.3.6.1.4.1.890.1.5.12.46.118.11.1.1.7
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

vturLanStatusEthPort 1.3.6.1.4.1.890.1.5.12.46.118.11.1.1.8
Display the current vtur LAN port to be isolated. From LAN1 to LAN4.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturLanStatusEthPortIsolate 1.3.6.1.4.1.890.1.5.12.46.118.11.1.1.9
Display the current vtur LAN port isolated-enable or isolated-disable.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

vturCFMStatus 1.3.6.1.4.1.890.1.5.12.46.118.12
OBJECT IDENTIFIER    

vturCFMStatusTable 1.3.6.1.4.1.890.1.5.12.46.118.12.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VturCFMStatusEntry

vturCFMStatusEntry 1.3.6.1.4.1.890.1.5.12.46.118.12.1.1
An entry in vturCFMTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VturCFMStatusEntry  

vturCFMStatusMdName 1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.2
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vturCFMStatusMaName 1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vturCFMStatusVid 1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturCFMStatusMepId 1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.5
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  Dot1agCfmMepId  

vturCFMStatusMdLevel 1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.6
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturCFMStatusDestMAC 1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.8
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vturCFMStatusLBMCount 1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.9
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturCFMStatusResultSentLBM 1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.10
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturCFMStatusResultInorderLBM 1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.11
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturCFMStatusResultOutorderLBM 1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.12
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

vturCFMStatusMACAddr 1.3.6.1.4.1.890.1.5.12.46.118.12.1.1.13
CPE MAC address
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

pppoeIASetup 1.3.6.1.4.1.890.1.5.12.46.119
OBJECT IDENTIFIER    

globalPPPoEIA 1.3.6.1.4.1.890.1.5.12.46.119.1
OBJECT IDENTIFIER    

globalPPPoEIAEnable 1.3.6.1.4.1.890.1.5.12.46.119.1.1
To enable the global PPPoE IA. Once the configuration is enabled, the DSLAM will automatically generate the Agent Circuit ID field in PPPoE packet for identifying access loop logical ports as: slot number,portnumber and VLAN ID.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

globalPPPoEIACircuitIDInfoEnable 1.3.6.1.4.1.890.1.5.12.46.119.1.2
To enable extra information to be appended into Agnet Circuit ID filed.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

globalPPPoEIACircuitIDInfoData 1.3.6.1.4.1.890.1.5.12.46.119.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

globalPPPoEIARemoteIDEnable 1.3.6.1.4.1.890.1.5.12.46.119.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

globalPPPoEIARemoteIDData 1.3.6.1.4.1.890.1.5.12.46.119.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

globalPPPoEIARemoteIDType 1.3.6.1.4.1.890.1.5.12.46.119.1.6
<1:port|2:system>
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER port(1), system(2)  

globalPPPoEIACircuitIDType 1.3.6.1.4.1.890.1.5.12.46.119.1.7
<1:hostname|2:system>
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER hostname(1), system(2)  

pppoeIA 1.3.6.1.4.1.890.1.5.12.46.119.2
OBJECT IDENTIFIER    

maxNumberOfPPPoEIA 1.3.6.1.4.1.890.1.5.12.46.119.2.1
The maximum number of PPPoE IA (by VLAN) entries that can be created. A value of 0 for this object implies that there exists settings for global PPPoE IA.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

pppoeIATable 1.3.6.1.4.1.890.1.5.12.46.119.2.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PPPoEIAEntry

pppoeIAEntry 1.3.6.1.4.1.890.1.5.12.46.119.2.2.1
An entry in pppoeIATable.
Status: current Access: not-accessible
OBJECT-TYPE    
  PPPoEIAEntry  

pppoeIAVID 1.3.6.1.4.1.890.1.5.12.46.119.2.2.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

pppoeIACircuitIDInfoEnable 1.3.6.1.4.1.890.1.5.12.46.119.2.2.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

pppoeIACircuitIDInfoData 1.3.6.1.4.1.890.1.5.12.46.119.2.2.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pppoeIARemoteIDEnable 1.3.6.1.4.1.890.1.5.12.46.119.2.2.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

pppoeIARemoteIDData 1.3.6.1.4.1.890.1.5.12.46.119.2.2.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

pppoeIARowStatus 1.3.6.1.4.1.890.1.5.12.46.119.2.2.1.6
Tok_String
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

pppoeIARemoteIDType 1.3.6.1.4.1.890.1.5.12.46.119.2.2.1.7
<1:port | 2:system>
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER port(1), system(2)  

pppoeIACircuitIDType 1.3.6.1.4.1.890.1.5.12.46.119.2.2.1.8
<1:hostname | 2:system>
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER hostname(1), system(2)  

macFlush 1.3.6.1.4.1.890.1.5.12.46.122
OBJECT IDENTIFIER    

macFlushTable 1.3.6.1.4.1.890.1.5.12.46.122.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MacFlushEntry

macFlushEntry 1.3.6.1.4.1.890.1.5.12.46.122.1.1
An entry in macFlushTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacFlushEntry  

macFlushPortIndex 1.3.6.1.4.1.890.1.5.12.46.122.1.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

macFlushPortConfig 1.3.6.1.4.1.890.1.5.12.46.122.1.1.2
Set 1 to execute mac flush operation in the specified port, read value will always return 0
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

sfpThresholdSetup 1.3.6.1.4.1.890.1.5.12.46.123
OBJECT IDENTIFIER    

sfpUserInputActive 1.3.6.1.4.1.890.1.5.12.46.123.1
Active transceiver threshold as user input.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

sfpThresholdTable 1.3.6.1.4.1.890.1.5.12.46.123.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SfpThresholdUserInputEntry

sfpThresholdUserInputEntry 1.3.6.1.4.1.890.1.5.12.46.123.2.1
An entry in sfpThresholdTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SfpThresholdUserInputEntry  

sfpPortIndex 1.3.6.1.4.1.890.1.5.12.46.123.2.1.1
sfp port index
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

sfpTempHighAlarmThresh 1.3.6.1.4.1.890.1.5.12.46.123.2.1.2
User defined high alarm threshold of temperature of sfp port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sfpTempHighWarnThresh 1.3.6.1.4.1.890.1.5.12.46.123.2.1.3
User defined high warning threshold of temperature of sfp port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sfpTempLowWarnThresh 1.3.6.1.4.1.890.1.5.12.46.123.2.1.4
User defined low warning threshold of temperature of sfp port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sfpTempLowAlarmThresh 1.3.6.1.4.1.890.1.5.12.46.123.2.1.5
User defined low alarm threshold of temperature of sfp port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sfpVoltageHighAlarmThresh 1.3.6.1.4.1.890.1.5.12.46.123.2.1.6
User defined high alarm threshold of voltage of sfp port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sfpVoltageHighWarnThresh 1.3.6.1.4.1.890.1.5.12.46.123.2.1.7
User defined high warning threshold of voltage of sfp port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sfpVoltageLowWarnThresh 1.3.6.1.4.1.890.1.5.12.46.123.2.1.8
User defined low warning threshold of voltage of sfp port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sfpVoltageLowAlarmThresh 1.3.6.1.4.1.890.1.5.12.46.123.2.1.9
User defined low alarm threshold of voltage of sfp port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sfpTxBiasHighAlarmThresh 1.3.6.1.4.1.890.1.5.12.46.123.2.1.10
User defined high alarm threshold of tx bias of sfp port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sfpTxBiasHighWarnThresh 1.3.6.1.4.1.890.1.5.12.46.123.2.1.11
User defined high warning threshold of tx bias of sfp port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sfpTxBiasLowWarnThresh 1.3.6.1.4.1.890.1.5.12.46.123.2.1.12
User defined low warning threshold of tx bias of sfp port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sfpTxBiasLowAlarmThresh 1.3.6.1.4.1.890.1.5.12.46.123.2.1.13
User defined low alarm threshold of tx bias of sfp port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sfpTxPowerHighAlarmThresh 1.3.6.1.4.1.890.1.5.12.46.123.2.1.14
User defined high alarm threshold of tx power of sfp port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sfpTxPowerHighWarnThresh 1.3.6.1.4.1.890.1.5.12.46.123.2.1.15
User defined high warning threshold of tx power of sfp port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sfpTxPowerLowWarnThresh 1.3.6.1.4.1.890.1.5.12.46.123.2.1.16
User defined low warning threshold of tx power of sfp port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sfpTxPowerLowAlarmThresh 1.3.6.1.4.1.890.1.5.12.46.123.2.1.17
User defined low alarm threshold of tx power of sfp port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sfpRxPowerHighAlarmThresh 1.3.6.1.4.1.890.1.5.12.46.123.2.1.18
User defined high alarm threshold of rx power of sfp port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sfpRxPowerHighWarnThresh 1.3.6.1.4.1.890.1.5.12.46.123.2.1.19
User defined high warning threshold of rx power of sfp port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sfpRxPowerLowWarnThresh 1.3.6.1.4.1.890.1.5.12.46.123.2.1.20
User defined low warning threshold of rx power of sfp port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

sfpRxPowerLowAlarmThresh 1.3.6.1.4.1.890.1.5.12.46.123.2.1.21
User defined low alarm threshold of rx power of sfp port
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor