ZYXEL-VOICE-VLAN-MIB

File: ZYXEL-VOICE-VLAN-MIB.mib (6981 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC P-BRIDGE-MIB
ZYXEL-ES-SMI

Imported symbols

OBJECT-TYPE RowStatus MacAddress
MODULE-IDENTITY DisplayString EnabledStatus
esMgmt

Defined Types

ZyxelVoiceVlanOUIEntry  
SEQUENCE    
  zyVoiceVlanOUIAddress MacAddress
  zyVoiceVlanOUIMask MacAddress
  zyVoiceVlanOUIDescription DisplayString
  zyVoiceVlanOUIRowStatus RowStatus

ZyxelVoiceVlanDeviceEntry  
SEQUENCE    
  zyVoiceVlanDevicePort INTEGER
  zyVoiceVlanDeviceMacAddress MacAddress
  zyVoiceVlanDeviceType INTEGER
  zyVoiceVlanDeviceStartTime DisplayString

Defined Values

zyxelVoiceVlan 1.3.6.1.4.1.890.1.15.3.96
The subtree for voice vlan
MODULE-IDENTITY    

zyxelVoiceVlanSetup 1.3.6.1.4.1.890.1.15.3.96.1
OBJECT IDENTIFIER    

zyxelVoiceVlanStatus 1.3.6.1.4.1.890.1.15.3.96.2
OBJECT IDENTIFIER    

zyxelVoiceVlanID 1.3.6.1.4.1.890.1.15.3.96.1.1
Select the VLAN ID as voice VLAN feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..4094  

zyxelVoiceVlanPriority 1.3.6.1.4.1.890.1.15.3.96.1.2
Set the priority of the voice traffic.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

zyxelVoiceVlanAgingTime 1.3.6.1.4.1.890.1.15.3.96.1.3
Set the aging time of the normal port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

zyxelVoiceVlanLLDPLearningState 1.3.6.1.4.1.890.1.15.3.96.1.4
The switch can identify IP phone by LLDP-MED protocol. You must enabled LLDP.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

zyxelVoiceVlanMaxNumberOfOUI 1.3.6.1.4.1.890.1.15.3.96.1.5
The maximum number of Voice VLAN OUI entries that can be created.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

zyxelVoiceVlanOUITable 1.3.6.1.4.1.890.1.15.3.96.1.6
The table contains Voice VLAN OUI configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZyxelVoiceVlanOUIEntry

zyxelVoiceVlanOUIEntry 1.3.6.1.4.1.890.1.15.3.96.1.6.1
An entry contains voice VLAN OUI configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZyxelVoiceVlanOUIEntry  

zyVoiceVlanOUIAddress 1.3.6.1.4.1.890.1.15.3.96.1.6.1.1
Set a MAC address to add to the OUI list.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

zyVoiceVlanOUIMask 1.3.6.1.4.1.890.1.15.3.96.1.6.1.2
Set a mask to identify OUI addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

zyVoiceVlanOUIDescription 1.3.6.1.4.1.890.1.15.3.96.1.6.1.3
A descriptive name for this OUI.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

zyVoiceVlanOUIRowStatus 1.3.6.1.4.1.890.1.15.3.96.1.6.1.4
This object allows entries to be created and deleted from the OUI table.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

zyxelVoiceVlanDeviceTable 1.3.6.1.4.1.890.1.15.3.96.2.1
The table contains Voice Vlan Device configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZyxelVoiceVlanDeviceEntry

zyxelVoiceVlanDeviceEntry 1.3.6.1.4.1.890.1.15.3.96.2.1.1
An entry contains Voice Vlan Device configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZyxelVoiceVlanDeviceEntry  

zyVoiceVlanDevicePort 1.3.6.1.4.1.890.1.15.3.96.2.1.1.1
This field displays the port number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

zyVoiceVlanDeviceMacAddress 1.3.6.1.4.1.890.1.15.3.96.2.1.1.2
Type a MAC address in valid MAC address format, that is , six hexadecimal character pairs
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

zyVoiceVlanDeviceType 1.3.6.1.4.1.890.1.15.3.96.2.1.1.3
This field displays whether Voice device identity through OUI or LLDP-MED protocol.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER oui(0), lldp(1)  

zyVoiceVlanDeviceStartTime 1.3.6.1.4.1.890.1.15.3.96.2.1.1.4
This field displays start time that device learned in switch.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zyxelVoiceVlanDeviceFlush 1.3.6.1.4.1.890.1.15.3.96.2.2
Active to clear the voice VLAN device table.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

zyxelVoiceVlanDeviceFlushPort 1.3.6.1.4.1.890.1.15.3.96.2.3
Clear all learned voice VLAN device on the specified port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER