ZYXEL-VDSLLINE-MIB

File: ZYXEL-VDSLLINE-MIB.mib (72151 bytes)

Imported modules

ZYXEL-MIB	RFC1155-SMI	RFC-1212
RFC1213-MIB	SNMPv2-TC

Imported symbols

vesSeriesCommon	Gauge	Counter
TimeTicks	OBJECT-TYPE	DisplayString
RowStatus

Defined Types

AccessSwitchVdslLineEntry
SEQUENCE
	accessSwitchVdslLineCoding	INTEGER
	accessSwitchVdslLineDiscCount	Counter
	accessSwitchVdslLineConfProfile	DisplayString

AccessSwitchVdslVtuoPhysEntry
SEQUENCE
	accessSwitchVdslVtuoCurrSnrMgn	INTEGER
	accessSwitchVdslVtuoCurrMse	INTEGER
	accessSwitchVdslVtuoCurrPsd	INTEGER
	accessSwitchVdslVtuoCurrRsErr	Counter
	accessSwitchVdslVtuoCurrAtn	Gauge
	accessSwitchVdslVtuoCurrOutputPwr	INTEGER
	accessSwitchVdslVtuoCurrRate	INTEGER
	accessSwitchVdslVtuoCurrAttainableRate	Gauge
	accessSwitchVdslVtuoCurrStatus	INTEGER

AccessSwitchVdslVturPhysEntry
SEQUENCE
	accessSwitchVdslVturCurrSnrMgn	INTEGER
	accessSwitchVdslVturCurrMse	INTEGER
	accessSwitchVdslVturCurrPsd	INTEGER
	accessSwitchVdslVturCurrRsErr	Counter
	accessSwitchVdslVturCurrAtn	Gauge
	accessSwitchVdslVturCurrOutputPwr	INTEGER
	accessSwitchVdslVturCurrRate	INTEGER
	accessSwitchVdslVturCurrAttainableRate	Gauge
	accessSwitchVdslVturCurrStatus	INTEGER

AccessSwitchVdslVtuoInventoryEntry
SEQUENCE
	accessSwitchVdslVtuoInvSerialNumber	DisplayString
	accessSwitchVdslVtuoInvVendorID	DisplayString
	accessSwitchVdslVtuoInvVersionNumber	DisplayString

AccessSwitchVdslVturInventoryEntry
SEQUENCE
	accessSwitchVdslVturInvSerialNumber	DisplayString
	accessSwitchVdslVturInvVendorID	DisplayString
	accessSwitchVdslVturInvVersionNumber	DisplayString

AccessSwitchVdslVtuoPerfDataEntry
SEQUENCE
	accessSwitchVdslVtuoPerfLofs	Counter
	accessSwitchVdslVtuoPerfLoss	Counter
	accessSwitchVdslVtuoPerfLols	Counter
	accessSwitchVdslVtuoPerfLprs	Counter
	accessSwitchVdslVtuoPerfESs	Counter
	accessSwitchVdslVtuoPerfInits	Counter
	accessSwitchVdslVtuoPerfValidIntervals	INTEGER
	accessSwitchVdslVtuoPerfInvalidIntervals	INTEGER
	accessSwitchVdslVtuoPerfCurr15MinTimeElapsed	Gauge
	accessSwitchVdslVtuoPerfCurr15MinLofs	Counter
	accessSwitchVdslVtuoPerfCurr15MinLoss	Counter
	accessSwitchVdslVtuoPerfCurr15MinLols	Counter
	accessSwitchVdslVtuoPerfCurr15MinLprs	Counter
	accessSwitchVdslVtuoPerfCurr15MinESs	Counter
	accessSwitchVdslVtuoPerfCurr15MinInits	Counter
	accessSwitchVdslVtuoPerfCurr1DayTimeElapsed	Gauge
	accessSwitchVdslVtuoPerfCurr1DayLofs	Counter
	accessSwitchVdslVtuoPerfCurr1DayLoss	Counter
	accessSwitchVdslVtuoPerfCurr1DayLols	Counter
	accessSwitchVdslVtuoPerfCurr1DayLprs	Counter
	accessSwitchVdslVtuoPerfCurr1DayESs	Counter
	accessSwitchVdslVtuoPerfCurr1DayInits	Counter
	accessSwitchVdslVtuoPerfPrev1DayMoniSecs	INTEGER
	accessSwitchVdslVtuoPerfPrev1DayLofs	Counter
	accessSwitchVdslVtuoPerfPrev1DayLoss	Counter
	accessSwitchVdslVtuoPerfPrev1DayLols	Counter
	accessSwitchVdslVtuoPerfPrev1DayLprs	Counter
	accessSwitchVdslVtuoPerfPrev1DayESs	Counter
	accessSwitchVdslVtuoPerfPrev1DayInits	Counter

AccessSwitchVdslVturPerfDataEntry
SEQUENCE
	accessSwitchVdslVturPerfLofs	Counter
	accessSwitchVdslVturPerfLoss	Counter
	accessSwitchVdslVturPerfLprs	Counter
	accessSwitchVdslVturPerfESs	Counter
	accessSwitchVdslVturPerfValidIntervals	INTEGER
	accessSwitchVdslVturPerfInvalidIntervals	INTEGER
	accessSwitchVdslVturPerfCurr15MinTimeElapsed	Gauge
	accessSwitchVdslVturPerfCurr15MinLofs	Counter
	accessSwitchVdslVturPerfCurr15MinLoss	Counter
	accessSwitchVdslVturPerfCurr15MinLprs	Counter
	accessSwitchVdslVturPerfCurr15MinESs	Counter
	accessSwitchVdslVturPerfCurr1DayTimeElapsed	Gauge
	accessSwitchVdslVturPerfCurr1DayLofs	Counter
	accessSwitchVdslVturPerfCurr1DayLoss	Counter
	accessSwitchVdslVturPerfCurr1DayLprs	Counter
	accessSwitchVdslVturPerfCurr1DayESs	Counter
	accessSwitchVdslVturPerfPrev1DayMoniSecs	INTEGER
	accessSwitchVdslVturPerfPrev1DayLofs	Counter
	accessSwitchVdslVturPerfPrev1DayLoss	Counter
	accessSwitchVdslVturPerfPrev1DayLprs	Counter
	accessSwitchVdslVturPerfPrev1DayESs	Counter

AccessSwitchVdslVtuoIntervalEntry
SEQUENCE
	accessSwitchVdslVtuoIntervalNumber	INTEGER
	accessSwitchVdslVtuoIntervalLofs	Counter
	accessSwitchVdslVtuoIntervalLoss	Counter
	accessSwitchVdslVtuoIntervalLols	Counter
	accessSwitchVdslVtuoIntervalLprs	Counter
	accessSwitchVdslVtuoIntervalESs	Counter
	accessSwitchVdslVtuoIntervalInits	Counter
	accessSwitchVdslVtuoIntervalValidData	INTEGER

AccessSwitchVdslVturIntervalEntry
SEQUENCE
	accessSwitchVdslVturIntervalNumber	INTEGER
	accessSwitchVdslVturIntervalLofs	Counter
	accessSwitchVdslVturIntervalLoss	Counter
	accessSwitchVdslVturIntervalLprs	Counter
	accessSwitchVdslVturIntervalESs	Counter
	accessSwitchVdslVturIntervalValidData	INTEGER

AccessSwitchVdslLineConfProfileEntry
SEQUENCE
	accessSwitchVdslLineConfProfileName	DisplayString
	accessSwitchVdslLineConfMode	INTEGER
	accessSwitchVdslVtuoConfRate	INTEGER
	accessSwitchVdslVtuoConfTargetSnrMgn	INTEGER
	accessSwitchVdslVtuoConfMaxSnrMgn	INTEGER
	accessSwitchVdslVtuoConfMinSnrMgn	INTEGER
	accessSwitchVdslVturConfRate	INTEGER
	accessSwitchVdslVturConfTargetSnrMgn	INTEGER
	accessSwitchVdslVturConfMaxSnrMgn	INTEGER
	accessSwitchVdslVturConfMinSnrMgn	INTEGER
	accessSwitchVdslLineConfProfileRowStatus	RowStatus

AccessSwitchVdslVtuoQamEntry
SEQUENCE
	accessSwitchVdslVtuoQamConstellation	INTEGER
	accessSwitchVdslVtuoQamInterpolation	INTEGER
	accessSwitchVdslVtuoQamFc	INTEGER

AccessSwitchVdslVturQamEntry
SEQUENCE
	accessSwitchVdslVturQamConstellation	INTEGER
	accessSwitchVdslVturQamInterpolation	INTEGER
	accessSwitchVdslVturQamFc	INTEGER

Defined Values

accessSwitchVdslLineMib		1.3.6.1.4.1.890.1.5.12.1.1
OBJECT IDENTIFIER

accessSwitchVdslLineMibObjects		1.3.6.1.4.1.890.1.5.12.1.1.1
OBJECT IDENTIFIER

accessSwitchVdslLCSMib		1.3.6.1.4.1.890.1.5.12.1.1.2
OBJECT IDENTIFIER

accessSwitchVdslLCSMibObjects		1.3.6.1.4.1.890.1.5.12.1.1.2.1
OBJECT IDENTIFIER

accessSwitchVdslLCSQam		1.3.6.1.4.1.890.1.5.12.1.1.2.2
OBJECT IDENTIFIER

accessSwitchVdslLineTable		1.3.6.1.4.1.890.1.5.12.1.1.1.1
This table includes common attributes describing both ends of the line.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AccessSwitchVdslLineEntry

accessSwitchVdslLineEntry		1.3.6.1.4.1.890.1.5.12.1.1.1.1.1
An entry in the accessSwitchVdslLineTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AccessSwitchVdslLineEntry

accessSwitchVdslLineCoding		1.3.6.1.4.1.890.1.5.12.1.1.1.1.1.1
Specifies the VDSL coding type used on this line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), dmt(2), cap(3), qam(4)

accessSwitchVdslLineDiscCount		1.3.6.1.4.1.890.1.5.12.1.1.1.1.1.2
Count of the number of disconnection failures since agent reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslLineConfProfile		1.3.6.1.4.1.890.1.5.12.1.1.1.1.1.3
The value of this object identifies the row in the VDSL Line Configuration Profile Table, (accessSwitchVdslLineConfProfileTable), which applies for this VDSL line.
Status: mandatory	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

accessSwitchVdslVtuoPhysTable		1.3.6.1.4.1.890.1.5.12.1.1.1.2
This table provides one row for each VTU-O. Each row contains the physical layer parameters for that VTU-O.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AccessSwitchVdslVtuoPhysEntry

accessSwitchVdslVtuoPhysEntry		1.3.6.1.4.1.890.1.5.12.1.1.1.2.1
An entry in the accessSwitchVdslVtuoPhysTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AccessSwitchVdslVtuoPhysEntry

accessSwitchVdslVtuoCurrSnrMgn		1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.1
Noise Margin as seen by this VTU with respect to its received signal in 0.01dB.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

accessSwitchVdslVtuoCurrMse		1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.2
Minimum Square Error as seen by this VTU with respect to its received signal in 0.01dB.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

accessSwitchVdslVtuoCurrPsd		1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.3
Power Spectral Density as seen by this VTU with respect to its received signal in 0.01dBm/Hz.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

accessSwitchVdslVtuoCurrRsErr		1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.4
Reed-Solomon error counted by this VTU with respect to its received signal.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoCurrAtn		1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.5
Measured difference in the total power transmitted by the peer VTU and the total power received by this VTU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

accessSwitchVdslVtuoCurrOutputPwr		1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.6
Measured total output power in 0.01dBm transmitted by this VTU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

accessSwitchVdslVtuoCurrRate		1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.7
Actual transmission rate in bits-per-second on this line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

accessSwitchVdslVtuoCurrAttainableRate		1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.8
Indicates the maximum mandatoryly attainable data rate in bits-per-second by the VTU. This value will be equal or greater than the mandatory line rate.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

accessSwitchVdslVtuoCurrStatus		1.3.6.1.4.1.890.1.5.12.1.1.1.2.1.9
Indicates mandatory state of the VTU-O line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There no defects on the line 1 lossOfFraming VTU-O failure due to not receiving valid frame. 2 lossOfSignal VTU-O failure due to not receiving signal. 3 lossOfPower VTU-O failure due to loss of power. Note: the Agent may still function. 4 lossOfSignalQuality Loss of Signal Quality is declared when the Noise Margin falls below the Minimum Noise Margin, or the bit-error-rate exceeds 10^-7. 5 lossOfLink VTU-O failure due to inability to link with VTU-R. 6 dataInitFailure VTU-O failure during initialization due to bit errors corrupting startup exchange data. 7 configInitFailure VTU-O failure during initialization due to peer VTU not able to support requested configuration 8 protocolInitFailure VTU-O failure during initialization due to incompatible protocol used by the peer VTU. 9 noPeerVtuPresent VTU-O failure during initialization due to no activation sequence detected from peer VTU. This is intended to supplement ifOperStatus.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

accessSwitchVdslVturPhysTable		1.3.6.1.4.1.890.1.5.12.1.1.1.3
This table provides one row for each VTU-R. Each row contains the physical layer parameters for that VTU-R.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AccessSwitchVdslVturPhysEntry

accessSwitchVdslVturPhysEntry		1.3.6.1.4.1.890.1.5.12.1.1.1.3.1
An entry in the accessSwitchVdslVturPhysTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AccessSwitchVdslVturPhysEntry

accessSwitchVdslVturCurrSnrMgn		1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.1
Noise Margin as seen by this VTU with respect to its received signal in 0.01dB.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

accessSwitchVdslVturCurrMse		1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.2
Minimum Square Error as seen by this VTU with respect to its received signal in 0.01dB.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

accessSwitchVdslVturCurrPsd		1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.3
Power Spectral Density as seen by this VTU with respect to its received signal in 0.01dBm/Hz.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

accessSwitchVdslVturCurrRsErr		1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.4
Reed-Solomon error counted by this VTU with respect to its received signal.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturCurrAtn		1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.5
Measured difference in the total power transmitted by the peer VTU and the total power received by this VTU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

accessSwitchVdslVturCurrOutputPwr		1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.6
Measured total output power in 0.01dBm transmitted by this VTU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

accessSwitchVdslVturCurrRate		1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.7
Actual transmission rate in bits-per-second on this line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

accessSwitchVdslVturCurrAttainableRate		1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.8
Indicates the maximum mandatoryly attainable data rate in bits-per-second by the VTU. This value will be equal or greater than the mandatory line rate.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge

accessSwitchVdslVturCurrStatus		1.3.6.1.4.1.890.1.5.12.1.1.1.3.1.9
Indicates mandatory state of the VTU-R line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There no defects on the line 1 lossOfFraming VTU-R failure due to not receiving valid frame. 2 lossOfSignal VTU-R failure due to not receiving signal. 3 lossOfPower VTU-R failure due to loss of power. Note: the Agent may still function. 4 lossOfSignalQuality Loss of Signal Quality is declared when the Noise Margin falls below the Minimum Noise Margin, or the bit-error-rate exceeds 10^-7. This is intended to supplement ifOperStatus.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

accessSwitchVdslVtuoInventoryTable		1.3.6.1.4.1.890.1.5.12.1.1.1.4
This table provides one row for each VTU-O. Each row contains the inventory parameters for that VTU-O.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AccessSwitchVdslVtuoInventoryEntry

accessSwitchVdslVtuoInventoryEntry		1.3.6.1.4.1.890.1.5.12.1.1.1.4.1
An entry in the accessSwitchVdslVtuoInventoryTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AccessSwitchVdslVtuoInventoryEntry

accessSwitchVdslVtuoInvSerialNumber		1.3.6.1.4.1.890.1.5.12.1.1.1.4.1.1
The vendor specific string that identifies the vendor equipment.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

accessSwitchVdslVtuoInvVendorID		1.3.6.1.4.1.890.1.5.12.1.1.1.4.1.2
The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

accessSwitchVdslVtuoInvVersionNumber		1.3.6.1.4.1.890.1.5.12.1.1.1.4.1.3
The vendor specific version number sent by this VTU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[10] and expressed as readable characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

accessSwitchVdslVturInventoryTable		1.3.6.1.4.1.890.1.5.12.1.1.1.5
This table provides one row for each VTU-R. Each row contains the inventory parameters for that VTU-R.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AccessSwitchVdslVturInventoryEntry

accessSwitchVdslVturInventoryEntry		1.3.6.1.4.1.890.1.5.12.1.1.1.5.1
An entry in the accessSwitchVdslVturInventoryTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AccessSwitchVdslVturInventoryEntry

accessSwitchVdslVturInvSerialNumber		1.3.6.1.4.1.890.1.5.12.1.1.1.5.1.1
The vendor specific string that identifies the vendor equipment.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

accessSwitchVdslVturInvVendorID		1.3.6.1.4.1.890.1.5.12.1.1.1.5.1.2
The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

accessSwitchVdslVturInvVersionNumber		1.3.6.1.4.1.890.1.5.12.1.1.1.5.1.3
The vendor specific version number sent by this VTU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[10] and expressed as readable characters.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

accessSwitchVdslVtuoPerfDataTable		1.3.6.1.4.1.890.1.5.12.1.1.1.6
This table provides one row for each VTU-O.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AccessSwitchVdslVtuoPerfDataEntry

accessSwitchVdslVtuoPerfDataEntry		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1
An entry in accessSwitchVdslVtuoPerfDataTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AccessSwitchVdslVtuoPerfDataEntry

accessSwitchVdslVtuoPerfLofs		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.1
Count of the number of Loss of Framing failures since agent reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfLoss		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.2
Count of the number of Loss of Signal failures since agent reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfLols		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.3
Count of the number of Loss of Link failures since agent reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfLprs		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.4
Count of the number of Loss of Power failures since agent reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfESs		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.5
Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfInits		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.6
Count of the line initialization attempts since agent reset. Includes both successful and failed attempts.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfValidIntervals		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.7
The number of previous 15-minute intervals in the interval table for which data was collected. Given that is the maximum # of intervals supported. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..96

accessSwitchVdslVtuoPerfInvalidIntervals		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.8
The number of intervals in the range from 0 to the value of accessSwitchVdslVtuoPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..96

accessSwitchVdslVtuoPerfCurr15MinTimeElapsed		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.9
Total elapsed seconds in this interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge	0..899

accessSwitchVdslVtuoPerfCurr15MinLofs		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.10
Count of seconds in the mandatory 15 minute interval when there was Loss of Framing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfCurr15MinLoss		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.11
Count of seconds in the mandatory 15 minute interval when there was Loss of Signal.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfCurr15MinLols		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.12
Count of seconds in the mandatory 15 minute interval when there was Loss of Link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfCurr15MinLprs		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.13
Count of seconds in the mandatory 15 minute interval when there was Loss of Power.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfCurr15MinESs		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.14
Count of Errored Seconds in the mandatory 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfCurr15MinInits		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.15
Count of the line initialization attempts in the mandatory 15 minute interval. Includes both successful and failed attempts.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfCurr1DayTimeElapsed		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.16
Number of seconds that have elapsed since the beginning of the mandatory 1-day interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge	0..86399

accessSwitchVdslVtuoPerfCurr1DayLofs		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.17
Count of the number of seconds when there was Loss of Framing during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfCurr1DayLoss		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.18
Count of the number of seconds when there was Loss of Signal during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfCurr1DayLols		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.19
Count of the number of seconds when there was Loss of Link during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfCurr1DayLprs		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.20
Count of the number of seconds when there was Loss of Power during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfCurr1DayESs		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.21
Count of Errored Seconds during the mandatory day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfCurr1DayInits		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.22
Count of the line initialization attempts in the day as measured by accessSwitchVdslVtuoPerfCurr1DayTimeElapsed. Includes both successful and failed attempts.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfPrev1DayMoniSecs		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.23
The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..86400

accessSwitchVdslVtuoPerfPrev1DayLofs		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.24
Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfPrev1DayLoss		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.25
Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfPrev1DayLols		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.26
Count of seconds in the interval when there was Loss of Link within the most recent previous 1-day period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfPrev1DayLprs		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.27
Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfPrev1DayESs		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.28
Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoPerfPrev1DayInits		1.3.6.1.4.1.890.1.5.12.1.1.1.6.1.29
Count of the line initialization attempts in the most recent previous 1-day period. Includes both successful and failed attempts.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturPerfDataTable		1.3.6.1.4.1.890.1.5.12.1.1.1.7
This table provides one row for each VTU-R.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AccessSwitchVdslVturPerfDataEntry

accessSwitchVdslVturPerfDataEntry		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1
An entry in accessSwitchVdslVturPerfDataTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AccessSwitchVdslVturPerfDataEntry

accessSwitchVdslVturPerfLofs		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.1
Count of the number of Loss of Framing failures since agent reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturPerfLoss		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.2
Count of the number of Loss of Signal failures since agent reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturPerfLprs		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.3
Count of the number of Loss of Power failures since agent reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturPerfESs		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.4
Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturPerfValidIntervals		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.5
The number of previous 15-minute intervals in the interval table for which data was collected. Given that is the maximum # of intervals supported. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..96

accessSwitchVdslVturPerfInvalidIntervals		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.6
The number of intervals in the range from 0 to the value of accessSwitchVdslVturPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..96

accessSwitchVdslVturPerfCurr15MinTimeElapsed		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.7
Total elapsed seconds in this interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge	0..899

accessSwitchVdslVturPerfCurr15MinLofs		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.8
Count of seconds in the mandatory 15 minute interval when there was Loss of Framing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturPerfCurr15MinLoss		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.9
Count of seconds in the mandatory 15 minute interval when there was Loss of Signal.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturPerfCurr15MinLprs		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.10
Count of seconds in the mandatory 15 minute interval when there was Loss of Power.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturPerfCurr15MinESs		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.11
Count of Errored Seconds in the mandatory 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturPerfCurr1DayTimeElapsed		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.12
Number of seconds that have elapsed since the beginning of the mandatory 1-day interval.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Gauge	0..86399

accessSwitchVdslVturPerfCurr1DayLofs		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.13
Count of the number of seconds when there was Loss of Framing during the mandatory day as measured by accessSwitchVdslVturPerfCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturPerfCurr1DayLoss		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.14
Count of the number of seconds when there was Loss of Signal during the mandatory day as measured by accessSwitchVdslVturPerfCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturPerfCurr1DayLprs		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.15
Count of the number of seconds when there was Loss of Power during the mandatory day as measured by accessSwitchVdslVturPerfCurr1DayTimeElapsed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturPerfCurr1DayESs		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.16
Count of Errored Seconds during the mandatory day as measured by accessSwitchVdslVturPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturPerfPrev1DayMoniSecs		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.17
The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..86400

accessSwitchVdslVturPerfPrev1DayLofs		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.18
Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturPerfPrev1DayLoss		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.19
Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturPerfPrev1DayLprs		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.20
Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturPerfPrev1DayESs		1.3.6.1.4.1.890.1.5.12.1.1.1.7.1.21
Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoIntervalTable		1.3.6.1.4.1.890.1.5.12.1.1.1.8
This table provides one row for each VTU-O performance data collection interval.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AccessSwitchVdslVtuoIntervalEntry

accessSwitchVdslVtuoIntervalEntry		1.3.6.1.4.1.890.1.5.12.1.1.1.8.1
An entry in the accessSwitchVdslVtuoIntervalTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AccessSwitchVdslVtuoIntervalEntry

accessSwitchVdslVtuoIntervalNumber		1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.1
Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..96

accessSwitchVdslVtuoIntervalLofs		1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.2
Count of seconds in the interval when there was Loss of Framing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoIntervalLoss		1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.3
Count of seconds in the interval when there was Loss of Signal.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoIntervalLols		1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.4
Count of seconds in the interval when there was Loss of Link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoIntervalLprs		1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.5
Count of seconds in the interval when there was Loss of Power.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoIntervalESs		1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.6
Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoIntervalInits		1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.7
Count of the line initialization attempts during the interval. Includes both successful and failed attempts.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVtuoIntervalValidData		1.3.6.1.4.1.890.1.5.12.1.1.1.8.1.8
This variable indicates if the data for this interval is valid.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

accessSwitchVdslVturIntervalTable		1.3.6.1.4.1.890.1.5.12.1.1.1.9
This table provides one row for each VTU-R performance data collection interval.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AccessSwitchVdslVturIntervalEntry

accessSwitchVdslVturIntervalEntry		1.3.6.1.4.1.890.1.5.12.1.1.1.9.1
An entry in the accessSwitchVdslVturIntervalTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AccessSwitchVdslVturIntervalEntry

accessSwitchVdslVturIntervalNumber		1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.1
Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..96

accessSwitchVdslVturIntervalLofs		1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.2
Count of seconds in the interval when there was Loss of Framing.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturIntervalLoss		1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.3
Count of seconds in the interval when there was Loss of Signal.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturIntervalLprs		1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.4
Count of seconds in the interval when there was Loss of Power.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturIntervalESs		1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.5
Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

accessSwitchVdslVturIntervalValidData		1.3.6.1.4.1.890.1.5.12.1.1.1.9.1.6
This variable indicates if the data for this interval is valid.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

accessSwitchVdslLineConfProfileTable		1.3.6.1.4.1.890.1.5.12.1.1.1.10
This table contains information on the VDSL line configuration. One entry in this table reflects a profile which can be used to configure the VDSL line.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AccessSwitchVdslLineConfProfileEntry

accessSwitchVdslLineConfProfileEntry		1.3.6.1.4.1.890.1.5.12.1.1.1.10.1
Each entry consists of a list of parameters that represents the configuration of an VDSL modem. When `dynamic' profiles are implemented, a default profile will always exist. This profile's name will be set to `DEFVAL' and its parameters will be set to vendor specific values, unless otherwise specified in this document. When `static' profiles are implemented, profiles are automaticly created or destroyed as VDSL physical lines are discovered and removed by the system. The name of the profile will be equivalent to the decimal value of the line's interface index.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AccessSwitchVdslLineConfProfileEntry

accessSwitchVdslLineConfProfileName		1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.1
This object is used by the line configuration table in order to identify a row of this table. When `dynamic' profiles are implemented, the profile name is user specified. Also, the system will always provide a default profile whose name is `DEFVAL'. When `static' profiles are implemented, there is an one-to-one relationship between each line and its profile. In which case, the profile name will need to algorithmicly represent the Line's ifIndex. Therefore, the profile's name is a decimalized string of the ifIndex that is fixed-length (i.e., 10) with leading zero(s). For example, the profile name for ifIndex which equals '15' will be '0000000015'.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..32)

accessSwitchVdslLineConfMode		1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.2
Specifies the VDSL mode type used on this line.
Status: mandatory	Access: read-create
OBJECT-TYPE
	INTEGER	tenBase-S(0), ansi(1), etsi(2)

accessSwitchVdslVtuoConfRate		1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.3
Transmission rate in bits-per-second specified by this VTU.
Status: mandatory	Access: read-create
OBJECT-TYPE
	INTEGER

accessSwitchVdslVtuoConfTargetSnrMgn		1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.4
Configured Target Signal/Noise Margin in 0.01dB. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
Status: mandatory	Access: read-create
OBJECT-TYPE
	INTEGER

accessSwitchVdslVtuoConfMaxSnrMgn		1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.5
Configured Maximum acceptable Signal/Noise Margin in 0.01dB. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.
Status: mandatory	Access: read-create
OBJECT-TYPE
	INTEGER

accessSwitchVdslVtuoConfMinSnrMgn		1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.6
Configured Minimum acceptable Signal/Noise Margin in 0.01dB. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down.
Status: mandatory	Access: read-create
OBJECT-TYPE
	INTEGER

accessSwitchVdslVturConfRate		1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.7
Transmission rate in bits-per-second specified by this VTU.
Status: mandatory	Access: read-create
OBJECT-TYPE
	INTEGER

accessSwitchVdslVturConfTargetSnrMgn		1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.8
Configured Target Signal/Noise Margin in 0.01dB. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
Status: mandatory	Access: read-create
OBJECT-TYPE
	INTEGER

accessSwitchVdslVturConfMaxSnrMgn		1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.9
Configured Maximum acceptable Signal/Noise Margin in 0.01dB. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.
Status: mandatory	Access: read-create
OBJECT-TYPE
	INTEGER

accessSwitchVdslVturConfMinSnrMgn		1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.10
Configured Minimum acceptable Signal/Noise Margin in 0.01dB. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down.
Status: mandatory	Access: read-create
OBJECT-TYPE
	INTEGER

accessSwitchVdslLineConfProfileRowStatus		1.3.6.1.4.1.890.1.5.12.1.1.1.10.1.11
This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active' is set, the system will validate the profile. Before a profile can be deleted or taken out of service, (by setting this object to `destroy' or `outOfService') it must be first unreferenced from all associated lines. If the implementator of this MIB has chosen not to implement `dynamic assignment' of profiles, this object's MIN-ACCESS is read-only and its value is always to be `active'.
Status: mandatory	Access: read-create
OBJECT-TYPE
	RowStatus

vesMaxNumOfProfiles		1.3.6.1.4.1.890.1.5.12.1.1.1.11
The maximum number of VDSL profiles which the system supports.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

accessSwitchVdslVtuoQamTable		1.3.6.1.4.1.890.1.5.12.1.1.2.2.1
This table provides one row for each VTU-O if QAM is used. Each row contains the modulation parameters for that VTU-O.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AccessSwitchVdslVtuoQamEntry

accessSwitchVdslVtuoQamEntry		1.3.6.1.4.1.890.1.5.12.1.1.2.2.1.1
An entry in the accessSwitchVdslVtuoQamTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AccessSwitchVdslVtuoQamEntry

accessSwitchVdslVtuoQamConstellation		1.3.6.1.4.1.890.1.5.12.1.1.2.2.1.1.1
Modulation method used by this VTU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

accessSwitchVdslVtuoQamInterpolation		1.3.6.1.4.1.890.1.5.12.1.1.2.2.1.1.2
Modulation speed used by this VTU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

accessSwitchVdslVtuoQamFc		1.3.6.1.4.1.890.1.5.12.1.1.2.2.1.1.3
Carrier frequency in Hz used by this ATU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

accessSwitchVdslVturQamTable		1.3.6.1.4.1.890.1.5.12.1.1.2.2.2
This table provides one row for each VTU-R if QAM is used. Each row contains the modulation parameters for that VTU-R.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AccessSwitchVdslVturQamEntry

accessSwitchVdslVturQamEntry		1.3.6.1.4.1.890.1.5.12.1.1.2.2.2.1
An entry in the accessSwitchVdslVturQamTable.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AccessSwitchVdslVturQamEntry

accessSwitchVdslVturQamConstellation		1.3.6.1.4.1.890.1.5.12.1.1.2.2.2.1.1
Modulation method used by this VTU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

accessSwitchVdslVturQamInterpolation		1.3.6.1.4.1.890.1.5.12.1.1.2.2.2.1.2
Modulation speed used by this VTU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

accessSwitchVdslVturQamFc		1.3.6.1.4.1.890.1.5.12.1.1.2.2.2.1.3
Carrier frequency in Hz used by this ATU.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER