ZYXEL-TRANSCEIVER-MIB

File: ZYXEL-TRANSCEIVER-MIB.mib (14197 bytes)

Imported modules

RFC1155-SMI SNMPv2-SMI SNMPv2-TC
RFC1213-MIB P-BRIDGE-MIB Q-BRIDGE-MIB
BRIDGE-MIB IF-MIB SNMP-FRAMEWORK-MIB
INET-ADDRESS-MIB DISMAN-PING-MIB IEEE8021-CFM-MIB
OSPF-MIB ZYXEL-ES-SMI

Imported symbols

enterprises OBJECT-TYPE RowStatus
DateAndTime TruthValue StorageType
MacAddress DisplayString EnabledStatus
PortList dot1dBasePort InterfaceIndexOrZero
SnmpAdminString InetAddressType InetAddress
OperationResponseStatus Counter TimeTicks
BridgeId Timeout dot1agCfmMdIndex
dot1agCfmMaIndex dot1agCfmMepIdentifier IpAddress
ifIndex NOTIFICATION-TYPE sysObjectID
ospfIfIpAddress ospfAddressLessIf ospfAreaId
ospfNbrIpAddr ospfNbrAddressLessIndex ospfLsdbAreaId
ospfLsdbType ospfLsdbLsid ospfLsdbRouterId
ospfVirtIfAreaId ospfVirtIfNeighbor esMgmt

Defined Types

ZyxelTransceiverSerialEntry  
SEQUENCE    
  zyTransceiverSerialModuleType INTEGER
  zyTransceiverSerialVendor DisplayString
  zyTransceiverSerialPartNumber DisplayString
  zyTransceiverSerialSerialNumber DisplayString
  zyTransceiverSerialRevision DisplayString
  zyTransceiverSerialDateCode DisplayString
  zyTransceiverSerialTransceiver DisplayString

ZyxelTransceiverDdmiEntry  
SEQUENCE    
  zyTransceiverDdmiType INTEGER
  zyTransceiverDdmiAlarmMax INTEGER
  zyTransceiverDdmiAlarmMin INTEGER
  zyTransceiverDdmiWarnMax INTEGER
  zyTransceiverDdmiWarnMin INTEGER
  zyTransceiverDdmiCurrent INTEGER
  zyTransceiverDdmiDescription DisplayString

Defined Values

zyxelTransceiver 1.3.6.1.4.1.890.1.15.3.84
The subtree for transceiver
MODULE-IDENTITY    

zyxelTransceiverStatus 1.3.6.1.4.1.890.1.15.3.84.1
OBJECT IDENTIFIER    

zyxelTransceiverTrapInfoObject 1.3.6.1.4.1.890.1.15.3.84.2
OBJECT IDENTIFIER    

zyxelTransceiverNotifications 1.3.6.1.4.1.890.1.15.3.84.3
OBJECT IDENTIFIER    

zyxelTransceiverSerialTable 1.3.6.1.4.1.890.1.15.3.84.1.1
The table contains transceiver serial information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZyxelTransceiverSerialEntry

zyxelTransceiverSerialEntry 1.3.6.1.4.1.890.1.15.3.84.1.1.1
An entry contains transceiver serial information.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZyxelTransceiverSerialEntry  

zyTransceiverSerialModuleType 1.3.6.1.4.1.890.1.15.3.84.1.1.1.1
Transceiver module type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ok-with-DDM(1), ok-without-DDM(2), nonoperational(3)  

zyTransceiverSerialVendor 1.3.6.1.4.1.890.1.15.3.84.1.1.1.2
Transceiver module vendor name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zyTransceiverSerialPartNumber 1.3.6.1.4.1.890.1.15.3.84.1.1.1.3
Part number provided by transceiver module vendor.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zyTransceiverSerialSerialNumber 1.3.6.1.4.1.890.1.15.3.84.1.1.1.4
Serial number provided by transceiver module vendor.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zyTransceiverSerialRevision 1.3.6.1.4.1.890.1.15.3.84.1.1.1.5
Revision level for part number provided by transceiver module vendor.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zyTransceiverSerialDateCode 1.3.6.1.4.1.890.1.15.3.84.1.1.1.6
Transceiver module vendor's manufacturing date code.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zyTransceiverSerialTransceiver 1.3.6.1.4.1.890.1.15.3.84.1.1.1.7
Transceiver module type names.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zyxelTransceiverDdmiTable 1.3.6.1.4.1.890.1.15.3.84.1.2
The table contains transceiver DDMI information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZyxelTransceiverDdmiEntry

zyxelTransceiverDdmiEntry 1.3.6.1.4.1.890.1.15.3.84.1.2.1
An entry contains transceiver DDMI information.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZyxelTransceiverDdmiEntry  

zyTransceiverDdmiType 1.3.6.1.4.1.890.1.15.3.84.1.2.1.1
Transceiver DDMI information type.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

zyTransceiverDdmiAlarmMax 1.3.6.1.4.1.890.1.15.3.84.1.2.1.2
Transceiver high alarm threshold. The unit for temperature is 0.01C The unit for voltage is 0.01V The unit for TX bias is 0.01mA The unit for TX/RX power is 0.01dbm
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

zyTransceiverDdmiAlarmMin 1.3.6.1.4.1.890.1.15.3.84.1.2.1.3
Transceiver low alarm threshold. The unit for temperature is 0.01C The unit for voltage is 0.01V The unit for TX bias is 0.01mA The unit for TX/RX power is 0.01dbm
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

zyTransceiverDdmiWarnMax 1.3.6.1.4.1.890.1.15.3.84.1.2.1.4
Transceiver high warn threshold. The unit for temperature is 0.01C The unit for voltage is 0.01V The unit for TX bias is 0.01mA The unit for TX/RX power is 0.01dbm
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

zyTransceiverDdmiWarnMin 1.3.6.1.4.1.890.1.15.3.84.1.2.1.5
Transceiver low warn threshold. The unit for temperature is 0.01C The unit for voltage is 0.01V The unit for TX bias is 0.01mA The unit for TX/RX power is 0.01dbm
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

zyTransceiverDdmiCurrent 1.3.6.1.4.1.890.1.15.3.84.1.2.1.6
Transceiver current DDMI value. The unit for temperature is 0.01C The unit for voltage is 0.01V The unit for TX bias is 0.01mA The unit for TX/RX power is 0.01dbm
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

zyTransceiverDdmiDescription 1.3.6.1.4.1.890.1.15.3.84.1.2.1.7
Transceiver DDMI description. Show N/A if transceiver DDMI is not available.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zyTransceiverTrapOutOfRangeType 1.3.6.1.4.1.890.1.15.3.84.2.1
There are the type of DDMI out of the normal operation range.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER alarm-High(0), warn-High(1), alarm-Low(2), warn-Low(3)  

zyTransceiverTrapOutOfRangeValue 1.3.6.1.4.1.890.1.15.3.84.2.2
There are the value of DDMI out of the normal operation range.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

zyTransceiverDdmiTemperatureOutOfRange 1.3.6.1.4.1.890.1.15.3.84.3.1
DDMI temperature is out of the normal operation range.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

zyTransceiverDdmiTxPowerOutOfRange 1.3.6.1.4.1.890.1.15.3.84.3.2
DDMI TxPower is out of the normal operation range.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

zyTransceiverDdmiRxPowerOutOfRange 1.3.6.1.4.1.890.1.15.3.84.3.3
DDMI RxPower is out of the normal operation range.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

zyTransceiverDdmiVoltageOutOfRange 1.3.6.1.4.1.890.1.15.3.84.3.4
DDMI voltage is out of the normal operation range.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

zyTransceiverDdmiTxBiasOutOfRange 1.3.6.1.4.1.890.1.15.3.84.3.5
DDMI TX bias is out of the normal operation range.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

zyTransceiverDdmiTemperatureOutOfRangeRecovered 1.3.6.1.4.1.890.1.15.3.84.3.6
DDMI temperature is recovered from out of the normal operation range.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

zyTransceiverDdmiTxPowerOutOfRangeRecovered 1.3.6.1.4.1.890.1.15.3.84.3.7
DDMI TxPower is recovered from out of the normal operation range.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

zyTransceiverDdmiRxPowerOutOfRangeRecovered 1.3.6.1.4.1.890.1.15.3.84.3.8
DDMI RxPower is recovered from out of the normal operation range.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

zyTransceiverDdmiVoltageOutOfRangeRecovered 1.3.6.1.4.1.890.1.15.3.84.3.9
DDMI voltage is recovered from out of the normal operation range.
Status: current Access: not-accessible
NOTIFICATION-TYPE    

zyTransceiverDdmiTxBiasOutOfRangeRecovered 1.3.6.1.4.1.890.1.15.3.84.3.10
DDMI TX bias is recovered from out of the normal operation range.
Status: current Access: not-accessible
NOTIFICATION-TYPE