ZYXEL-SESCOMMON-MIB

File: ZYXEL-SESCOMMON-MIB.mib (10788 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
SNMPv2-TC ZYXEL-MIB

Imported symbols

enterprises TimeTicks Counter
OBJECT-TYPE ifIndex DisplayString
RowStatus sesSeriesCommon

Defined Types

SesLineStatusEntry  
SEQUENCE    
  sesLineUptime TimeTicks
  sesLineLinkDown Counter
  sesLineNMdefect Counter
  sesLineHECdefect Counter
  sesLineTxPackets Counter
  sesLineRxPackets Counter
  sesLineTxFrames Counter
  sesLineRxFrames Counter
  sesLineTxCells Counter
  sesLineRxCells Counter

SesLineConfEntry  
SEQUENCE    
  sesLineConfEncap INTEGER
  sesLineConfVpi INTEGER
  sesLineConfVci INTEGER

SesPortBondingEntry  
SEQUENCE    
  sesPortBondingName DisplayString
  sesPortBondingMemberList OCTET STRING
  sesPortBondingNumOfMembers INTEGER
  sesPortBondingMode INTEGER
  sesPortBondingRowStatus RowStatus

SesNwireEntry  
SEQUENCE    
  sesNwireGroupName DisplayString
  sesNwireGroupNumber OCTET STRING
  sesNwireMode INTEGER
  sesNwireRowStatus RowStatus

Defined Values

sesLineStatusTable 1.3.6.1.4.1.890.1.5.5.1.1
This table contains the current status of SHDSL line. These managed objects are supported by ZyXEL SDSL access switches.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SesLineStatusEntry

sesLineStatusEntry 1.3.6.1.4.1.890.1.5.5.1.1.1
An zyxelLineStatusEntry containing the specific status for a particular SHDSL interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SesLineStatusEntry  

sesLineUptime 1.3.6.1.4.1.890.1.5.5.1.1.1.1
The time duration since the connection between STU-C STU-R is last setup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TimeTicks  

sesLineLinkDown 1.3.6.1.4.1.890.1.5.5.1.1.1.2
The number of link down since the SAM-1008 was last restarted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sesLineNMdefect 1.3.6.1.4.1.890.1.5.5.1.1.1.3
Count of noise margin defects
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sesLineHECdefect 1.3.6.1.4.1.890.1.5.5.1.1.1.4
Count of HEC defects
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sesLineTxPackets 1.3.6.1.4.1.890.1.5.5.1.1.1.5
Count of line Tx packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sesLineRxPackets 1.3.6.1.4.1.890.1.5.5.1.1.1.6
Count of line Rx packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sesLineTxFrames 1.3.6.1.4.1.890.1.5.5.1.1.1.7
Count of line Tx frames
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sesLineRxFrames 1.3.6.1.4.1.890.1.5.5.1.1.1.8
Count of line Rx frames
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sesLineTxCells 1.3.6.1.4.1.890.1.5.5.1.1.1.9
Count of line Tx cells
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sesLineRxCells 1.3.6.1.4.1.890.1.5.5.1.1.1.10
Count of line Rx cells
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

sesMaxNumOfProfiles 1.3.6.1.4.1.890.1.5.5.1.2
The maximum number of SHDSL profiles which the system supports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sesLineConfTable 1.3.6.1.4.1.890.1.5.5.1.3
This table includes common attributes describing the SHDSL line.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SesLineConfEntry

sesLineConfEntry 1.3.6.1.4.1.890.1.5.5.1.3.1
An entry in sesLineConfTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SesLineConfEntry  

sesLineConfEncap 1.3.6.1.4.1.890.1.5.5.1.3.1.1
The encapsulation of the SHDSL line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER llc(1), vc(2)  

sesLineConfVpi 1.3.6.1.4.1.890.1.5.5.1.3.1.2
The VPI of the SHDSL line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

sesLineConfVci 1.3.6.1.4.1.890.1.5.5.1.3.1.3
The VCI of the SHDSL line.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

sesMaxNumOfPortBondings 1.3.6.1.4.1.890.1.5.5.1.4
The maximum number of port bondings which the system supports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

sesPortBondingTable 1.3.6.1.4.1.890.1.5.5.1.5
This table includes the configuration of port bonding.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SesPortBondingEntry

sesPortBondingEntry 1.3.6.1.4.1.890.1.5.5.1.5.1
An entry in sesPortBondingTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SesPortBondingEntry  

sesPortBondingName 1.3.6.1.4.1.890.1.5.5.1.5.1.1
This object is used by the port bonding table in order to identify a row of this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..32)  

sesPortBondingNumOfMembers 1.3.6.1.4.1.890.1.5.5.1.5.1.2
The number of members included in the bonding entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

sesPortBondingMemberList 1.3.6.1.4.1.890.1.5.5.1.5.1.3
The member list is included in the bonding entry. Each member is identified by two octets. In the 2-wire mode, each member stands for a single port. In the 4-wire mode, each member stands for a 4-wire group. In the 8-wire mode, each member stands for a 8-wire group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sesPortBondingMode 1.3.6.1.4.1.890.1.5.5.1.5.1.4
The mode in which the bonding entry is. twoWireC mode stands for 2-wire plus stu-c, and so on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER twoWireC(1), twoWireR(2), fourWireC(3), fourWireR(4), eightWireC(5), eightWireR(6)  

sesPortBondingRowStatus 1.3.6.1.4.1.890.1.5.5.1.5.1.5
To delete an existing row in this table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

sesNwireTable 1.3.6.1.4.1.890.1.5.5.1.6
This table includes N-wire configurations.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SesNwireEntry

sesNwireEntry 1.3.6.1.4.1.890.1.5.5.1.6.1
An entry in sesNwireTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SesNwireEntry  

sesNwireGroupName 1.3.6.1.4.1.890.1.5.5.1.6.1.1
This object is used by the N-wire table in order to identify a row of this table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..32)  

sesNwireGroupNumber 1.3.6.1.4.1.890.1.5.5.1.6.1.2
The group number included in the N-wire entry. Each group is identified by two octets. In the 4-wire mode: Group1 stands for Port1 and Port2 Group2 stands for Port3 and Port4 Group3 stands for Port5 and Port6 Group4 stands for Port7 and Port8 In the 8-wire mode: Group1 stands for Port1, Port2, Port3 and Port4 Group2 stands for Port5, Port6, Port7 and Port8
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sesNwireMode 1.3.6.1.4.1.890.1.5.5.1.6.1.3
The mode in which the N-wire entry is. fourWireC mode stands for 4-wire plus stu-c, and so on.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER fourWireC(1), fourWireR(2), eightWireC(3), eightWireR(4)  

sesNwireRowStatus 1.3.6.1.4.1.890.1.5.5.1.6.1.4
To delete an existing row in this table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus