ZYXEL-L2-IP-MIB

File: ZYXEL-L2-IP-MIB.mib (7478 bytes)

Imported modules

RFC1155-SMI SNMPv2-SMI SNMPv2-TC
RFC1213-MIB P-BRIDGE-MIB Q-BRIDGE-MIB
BRIDGE-MIB IF-MIB SNMP-FRAMEWORK-MIB
INET-ADDRESS-MIB DISMAN-PING-MIB IEEE8021-CFM-MIB
OSPF-MIB ZYXEL-ES-SMI

Imported symbols

enterprises OBJECT-TYPE RowStatus
DateAndTime TruthValue StorageType
MacAddress DisplayString EnabledStatus
PortList dot1dBasePort InterfaceIndexOrZero
SnmpAdminString InetAddressType InetAddress
OperationResponseStatus Counter TimeTicks
BridgeId Timeout dot1agCfmMdIndex
dot1agCfmMaIndex dot1agCfmMepIdentifier IpAddress
ifIndex NOTIFICATION-TYPE sysObjectID
ospfIfIpAddress ospfAddressLessIf ospfAreaId
ospfNbrIpAddr ospfNbrAddressLessIndex ospfLsdbAreaId
ospfLsdbType ospfLsdbLsid ospfLsdbRouterId
ospfVirtIfAreaId ospfVirtIfNeighbor esMgmt

Defined Types

ZyxelLayer2IpInbandEntry  
SEQUENCE    
  zyLayer2IpInbandIpAddress IpAddress
  zyLayer2IpInbandMask IpAddress
  zyLayer2IpInbandGateway IpAddress
  zyLayer2IpInbandVid INTEGER
  zyLayer2IpInbandManageableState EnabledStatus
  zyLayer2IpInbandRowStatus RowStatus

Defined Values

zyxelL2Ip 1.3.6.1.4.1.890.1.15.3.38
The subtree for layer 2 switch ip address
MODULE-IDENTITY    

zyxelLayer2IpSetup 1.3.6.1.4.1.890.1.15.3.38.1
OBJECT IDENTIFIER    

zyLayer2IpDnsIpAddress 1.3.6.1.4.1.890.1.15.3.38.1.1
Enter a domain name server IP address in order to be able to use a domain name instead of an IP address.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

zyLayer2IpDefaultMgmt 1.3.6.1.4.1.890.1.15.3.38.1.2
Specify which traffic flow (In-Band or Out-of-band) the switch is to send packets originating from it or packets with unknown source.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER in-band(0), out-of-band(1)  

zyxelLayer2IpInbandDefaultSetup 1.3.6.1.4.1.890.1.15.3.38.1.3
OBJECT IDENTIFIER    

zyLayer2IpInbandDefaultType 1.3.6.1.4.1.890.1.15.3.38.1.3.1
The type of in-band IP address.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER dhcp-client(0), static-ip(1)  

zyLayer2IpInbandDefaultVid 1.3.6.1.4.1.890.1.15.3.38.1.3.2
The VLAN identification number associated with the switch IP address. This is the VLAN ID of the CPU and is used for management only.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

zyLayer2IpInbandDefaultStaticIpAddress 1.3.6.1.4.1.890.1.15.3.38.1.3.3
IP address of your switch.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

zyLayer2IpInbandDefaultStaticMask 1.3.6.1.4.1.890.1.15.3.38.1.3.4
The IP subnet mask of your switch.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

zyLayer2IpInbandDefaultStaticGateway 1.3.6.1.4.1.890.1.15.3.38.1.3.5
IP address of the default outgoing gateway.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

zyLayer2IpInbandMaxNumberOfInterfaces 1.3.6.1.4.1.890.1.15.3.38.1.4
The maximum number of in-band IP that can be created.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

zyxelLayer2IpInbandTable 1.3.6.1.4.1.890.1.15.3.38.1.5
The table contains layer 2 IP in-band configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ZyxelLayer2IpInbandEntry

zyxelLayer2IpInbandEntry 1.3.6.1.4.1.890.1.15.3.38.1.5.1
An entry contains layer 2 IP in-band configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  ZyxelLayer2IpInbandEntry  

zyLayer2IpInbandIpAddress 1.3.6.1.4.1.890.1.15.3.38.1.5.1.1
IP address for managing the switch by the members of the VLAN specified in the VLAN ID field.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

zyLayer2IpInbandMask 1.3.6.1.4.1.890.1.15.3.38.1.5.1.2
The IP subnet mask.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

zyLayer2IpInbandGateway 1.3.6.1.4.1.890.1.15.3.38.1.5.1.3
The IP address of the default outgoing gateway.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

zyLayer2IpInbandVid 1.3.6.1.4.1.890.1.15.3.38.1.5.1.4
Type the VLAN group identification number.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER  

zyLayer2IpInbandManageableState 1.3.6.1.4.1.890.1.15.3.38.1.5.1.5
Enable/Disable the specified IP address as manageable.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

zyLayer2IpInbandRowStatus 1.3.6.1.4.1.890.1.15.3.38.1.5.1.6
This object allows entries to be created and deleted from the in-band IP table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus