ZXR10-SYSTEM-SOFTWARE-MIB

File: ZXR10-SYSTEM-SOFTWARE-MIB.mib (55214 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC INET-ADDRESS-MIB
ZXR10-PROJECT-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE OBJECT-IDENTITY
enterprises Integer32 Unsigned32
DisplayString DateAndTime RowStatus
InetAddressType InetAddress zxUPN

Defined Types

Zxr10SwActivePackageInfoEntry  
SEQUENCE    
  zxr10SwActivePackageRackNo Integer32
  zxr10SwActivePackageShelfNo Integer32
  zxr10SwActivePackageSlotNo Integer32
  zxr10SwActivePackageCpuNo Integer32
  zxr10SwActivePackageDisplayName DisplayString
  zxr10SwActivePackageName DisplayString
  zxr10SwActivePackageVersion DisplayString
  zxr10SwActivePackageVndName DisplayString
  zxr10SwActivePackageBelongTo DisplayString

Zxr10SwInstallPackageInfoEntry  
SEQUENCE    
  zxr10SwInstallPackageDisplayName DisplayString
  zxr10SwInstallPackageStatus INTEGER
  zxr10SwInstallPackageName DisplayString
  zxr10SwInstallPackageVersion DisplayString
  zxr10SwInstallPackageSource DisplayString
  zxr10SwInstallPackageBuildTime DateAndTime
  zxr10SwInstallPackageBelongTo DisplayString
  zxr10SwInstallPackageAddTime DateAndTime
  zxr10SwInstallPackageOperation INTEGER
  zxr10SwInstallPackageActiveType INTEGER
  zxr10SwInstallPackageVndName DisplayString
  zxr10SwInstallPackageOperStatus INTEGER
  zxr10SwInstallPackageFailReason INTEGER
  zxr10SwInstallPackageSize Unsigned32
  zxr10SwInstallPackageRowStatus RowStatus

Zxr10SwInstallSetInfoEntry  
SEQUENCE    
  zxr10SwInstallSetName DisplayString
  zxr10SwInstallSetStatus INTEGER
  zxr10SwInstallSetSize Unsigned32
  zxr10SwInstallSetBuildTime DateAndTime
  zxr10SwInstallSetAddTime DateAndTime
  zxr10SwInstallSetOperation INTEGER
  zxr10SwInstallSetActivationType INTEGER
  zxr10SwInstallSetOperationStatus INTEGER
  zxr10SwInstallSetFailedReason INTEGER
  zxr10SwInstallSetRowStatus RowStatus

Zxr10FirmwareUpdateEntry  
SEQUENCE    
  zxr10FirmwareUpdateType INTEGER
  zxr10FirmwareUpdateRack Integer32
  zxr10FirmwareUpdateShelf Integer32
  zxr10FirmwareUpdateSlot Integer32
  zxr10FirmwareUpdateCpu Integer32
  zxr10FirmwareUpdateOperation INTEGER
  zxr10FirmwareUpdateStatus INTEGER

Zxr10FirmwareBatchUpdateEntry  
SEQUENCE    
  zxr10FirmwareBatchUpdateType INTEGER
  zxr10FirmwareBatchUpdateOperate INTEGER

Zxr10SoftwarePatchInfoEntry  
SEQUENCE    
  zxr10SoftwarePatchDisplayName DisplayString
  zxr10SoftwarePatchBelongTo DisplayString
  zxr10SoftwarePatchType INTEGER
  zxr10SoftwarePatchVersion DisplayString
  zxr10SoftwarePatchStatus INTEGER
  zxr10SoftwarePatchAddTime DateAndTime
  zxr10SoftwarePatchOperation INTEGER
  zxr10SoftwarePatchSize Unsigned32
  zxr10SoftwarePatchBuildTime DateAndTime
  zxr10SoftwarePatchMatch INTEGER
  zxr10SoftwarePatchOperStatus INTEGER
  zxr10SoftwarePatchFailReason INTEGER
  zxr10SoftwarePatchRowStatus RowStatus

Zxr10SoftwarePatchPkgInfoEntry  
SEQUENCE    
  zxr10SoftwarePatchPkgName DisplayString
  zxr10SoftwarePatchPkgType INTEGER
  zxr10SoftwarePatchPkgVersion DisplayString
  zxr10SoftwarePatchPkgOperation INTEGER
  zxr10SoftwarePatchPkgSize Unsigned32
  zxr10SoftwarePatchPkgBuildTime DateAndTime
  zxr10SoftwarePatchPkgOperStatus INTEGER
  zxr10SoftwarePatchPkgFailReason INTEGER
  zxr10SoftwarePatchPkgRowStatus RowStatus

Zxr10SwPatchEffectiveInfoEntry  
SEQUENCE    
  zxr10SwPatchEffectiveRack Integer32
  zxr10SwPatchEffectiveShelf Integer32
  zxr10SwPatchEffectiveSlot Integer32
  zxr10SwPatchEffectiveCpu Integer32
  zxr10SwPatchEffectiveDisplayName DisplayString
  zxr10SwPatchEffectiveStatus INTEGER
  zxr10SwPatchEffectiveBelongTo DisplayString

Defined Values

zxr10SystemSoftwareMIB 1.3.6.1.4.1.3902.3.6002.8
This MIB defines R10 software managed objects.
MODULE-IDENTITY    

zxr10SoftwareObjects 1.3.6.1.4.1.3902.3.6002.8.2
OBJECT IDENTIFIER    

zxr10SoftwareInfoObjects 1.3.6.1.4.1.3902.3.6002.8.2.1
OBJECT IDENTIFIER    

zxr10SwActivePackageInfoTable 1.3.6.1.4.1.3902.3.6002.8.2.1.2
The activated package information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10SwActivePackageInfoEntry

zxr10SwActivePackageInfoEntry 1.3.6.1.4.1.3902.3.6002.8.2.1.2.1
The activated package information entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10SwActivePackageInfoEntry  

zxr10SwActivePackageRackNo 1.3.6.1.4.1.3902.3.6002.8.2.1.2.1.1
Rack number of the system unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10SwActivePackageShelfNo 1.3.6.1.4.1.3902.3.6002.8.2.1.2.1.2
Shelf number of the system unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10SwActivePackageSlotNo 1.3.6.1.4.1.3902.3.6002.8.2.1.2.1.3
Slot number of the system unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10SwActivePackageCpuNo 1.3.6.1.4.1.3902.3.6002.8.2.1.2.1.4
CPU number of the system unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10SwActivePackageDisplayName 1.3.6.1.4.1.3902.3.6002.8.2.1.2.1.5
Full name of the activated package.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

zxr10SwActivePackageName 1.3.6.1.4.1.3902.3.6002.8.2.1.2.1.6
Name of the activated package.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxr10SwActivePackageVersion 1.3.6.1.4.1.3902.3.6002.8.2.1.2.1.7
Version of the activated package.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxr10SwActivePackageVndName 1.3.6.1.4.1.3902.3.6002.8.2.1.2.1.8
Virtual network device name of the activated package.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxr10SwActivePackageBelongTo 1.3.6.1.4.1.3902.3.6002.8.2.1.2.1.9
Package name of the patch package belonging to.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..52)  

zxr10SwInstallPackageInfoTable 1.3.6.1.4.1.3902.3.6002.8.2.1.3
The installed package information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10SwInstallPackageInfoEntry

zxr10SwInstallPackageInfoEntry 1.3.6.1.4.1.3902.3.6002.8.2.1.3.1
The installed package information entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10SwInstallPackageInfoEntry  

zxr10SwInstallPackageDisplayName 1.3.6.1.4.1.3902.3.6002.8.2.1.3.1.1
Full name of the installed package.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

zxr10SwInstallPackageStatus 1.3.6.1.4.1.3902.3.6002.8.2.1.3.1.2
Status of the installed package.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER added(1), committed(2), activated(3), deactivated(4)  

zxr10SwInstallPackageName 1.3.6.1.4.1.3902.3.6002.8.2.1.3.1.3
Name of the installed package.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxr10SwInstallPackageVersion 1.3.6.1.4.1.3902.3.6002.8.2.1.3.1.4
Version of the installed package.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxr10SwInstallPackageSource 1.3.6.1.4.1.3902.3.6002.8.2.1.3.1.5
Source set name of the installed package.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..160)  

zxr10SwInstallPackageBuildTime 1.3.6.1.4.1.3902.3.6002.8.2.1.3.1.6
Building time of the installed package.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxr10SwInstallPackageBelongTo 1.3.6.1.4.1.3902.3.6002.8.2.1.3.1.7
Package name of the patch package belonging to.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..52)  

zxr10SwInstallPackageAddTime 1.3.6.1.4.1.3902.3.6002.8.2.1.3.1.8
Installed time of the installed package.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxr10SwInstallPackageOperation 1.3.6.1.4.1.3902.3.6002.8.2.1.3.1.9
Operation of the installed package. To activate a package, zxr10SwInstallPackageOperation and zxr10SwInstallPackageActiveType are mandatory, zxr10SwInstallPackageVndName is optional. To deactive a package, zxr10SwInstallPackageOperation is mandatory, zxr10SwInstallPackageVndName is optional.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER activate(1), deactivate(2)  

zxr10SwInstallPackageActiveType 1.3.6.1.4.1.3902.3.6002.8.2.1.3.1.10
Activation type of the installed package, description as follows: normal: Normal upgrade. parallelReload: The system units will be reloading at the same time.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER normal(1)  

zxr10SwInstallPackageVndName 1.3.6.1.4.1.3902.3.6002.8.2.1.3.1.11
The name of the virtual network device on that the package to be activated or deactivated. If this object does not be set with zxr10SwInstallPackageOperation, the package will be activated or deactivated on all the virtual network devices.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxr10SwInstallPackageOperStatus 1.3.6.1.4.1.3902.3.6002.8.2.1.3.1.12
Status of operating package.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), doing(2), success(3), failed(4)  

zxr10SwInstallPackageFailReason 1.3.6.1.4.1.3902.3.6002.8.2.1.3.1.13
Failure reason of opterating package, description as follows: success: Success. unknownErr: Unknown error. noMem: No enough memory. pending: Pending. executing: Executing. cmdNotFinish: Can not process this command because other command is conflicted. notSupport: The function does not support. cancel: Cancel. pkgNotExist: The package does not exist. pkgActivated: The package has been activated. pkgNotActivated: The package has not been activated. unmatchMajorVer: Unmatched major version. runVerSyn: Version file(s) synchronization is being executed. cannotDeactBase: Base package can not be deactivated. isolateSscFailed: Isolating SSC failed. reloadPkgDeactFailed: The package only can be deactivated in parallel-reload mode. notMeetDepend: The package does not meet the dependence. actConflict: The package conflicted with the packages which have been activated. leNotReady: The operation is not allowed while any master LE is on the SSC, please switch LE first and try again. noActByVnd: Firmware or base package can not be activated or deactivated by assigning VND. issuNotSupport: SSC does not exist or package activation mode is parallel-reload. needCommit: Can not be deleted before being committed. needDeactive: Can not be deleted before being deactivated. needDeactiveAndCommit: Can not be deleted before being deactivated and committed. parentPackageExists: Can not be deleted when parent package exists.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER success(1), unknownErr(2), noMem(3), pending(4), executing(5), cmdNotFinish(6), notSupport(7), cancel(8), pkgNotExist(9), pkgActivated(10), pkgNotActivated(11), unmatchMajorVer(12), runVerSyn(13), cannotDeactBase(14), isolateSscFailed(15), reloadPkgDeactFailed(16), notMeetDepend(17), actConflict(18), leNotReady(19), noActByVnd(20), issuNotSupport(21), needCommit(50), needDeactive(51), needDeactiveAndCommit(52), parentPackageExists(53)  

zxr10SwInstallPackageSize 1.3.6.1.4.1.3902.3.6002.8.2.1.3.1.14
Size of the installed package.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

zxr10SwInstallPackageRowStatus 1.3.6.1.4.1.3902.3.6002.8.2.1.3.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'destroy'. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10SwInstallSetInfoTable 1.3.6.1.4.1.3902.3.6002.8.2.1.4
The installed set information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10SwInstallSetInfoEntry

zxr10SwInstallSetInfoEntry 1.3.6.1.4.1.3902.3.6002.8.2.1.4.1
The installed set information entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10SwInstallSetInfoEntry  

zxr10SwInstallSetName 1.3.6.1.4.1.3902.3.6002.8.2.1.4.1.1
Full name of the installed set.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString Size(1..160)  

zxr10SwInstallSetStatus 1.3.6.1.4.1.3902.3.6002.8.2.1.4.1.2
Status of the installed set.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER added(1), committed(2), activated(3), deactivated(4)  

zxr10SwInstallSetSize 1.3.6.1.4.1.3902.3.6002.8.2.1.4.1.3
Size of the installed set.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

zxr10SwInstallSetBuildTime 1.3.6.1.4.1.3902.3.6002.8.2.1.4.1.4
Building time of the installed set.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxr10SwInstallSetAddTime 1.3.6.1.4.1.3902.3.6002.8.2.1.4.1.5
Installed time of the installed set.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxr10SwInstallSetOperation 1.3.6.1.4.1.3902.3.6002.8.2.1.4.1.6
Operation of the installed set.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER activate(1)  

zxr10SwInstallSetActivationType 1.3.6.1.4.1.3902.3.6002.8.2.1.4.1.7
Activation type of the installed set, description as follows: normal: Normal upgrade. parallelReload: The system units will be reloaded at the same time. parallelReloadGrace: The system units will be reset gracefully and reloaded at the same time. issuGrace: In-service software upgrade, the system units will be reset gracefully and reloaded one by one.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER normal(1), parallelReload(3), parallelReloadGrace(5), issuGrace(6)  

zxr10SwInstallSetOperationStatus 1.3.6.1.4.1.3902.3.6002.8.2.1.4.1.8
Status of operating set.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), doing(2), success(3), failed(4)  

zxr10SwInstallSetFailedReason 1.3.6.1.4.1.3902.3.6002.8.2.1.4.1.9
Failure reason of the install actived a set, description as follows: success: Success. unknownErr: Unknown error. noMem: No enough memory. pending: Pending. executing: Executing. cmdNotFinish: Can not process this command because other command is conflicted. notSupport: The function does not support. cancel: Cancel. pkgNotExist: The package does not exist. pkgActivated: The package has been activated. pkgNotActivated: The package has not been activated. unmatchMajorVer: Unmatched major version. runVerSyn: Version file(s) synchronization is being executed. cannotDeactBase: Base package can not be deactivated. isolateSscFailed: Isolating SSC failed. reloadPkgDeactFailed: The package only can be deactivated in parallel-reload mode. notMeetDepend: The package does not meet the dependence. actConflict: The package conflicted with the packages which have been activated. leNotReady: The operation is not allowed while any master LE is on the SSC, please switch LE first and try again. noActByVnd: Firmware or base package can not be activated or deactivated by assigning VND. issuNotSupport: SSC does not exist or package activation mode is parallel-reload. needCommit: Can not be deleted before being committed. needDeactive: Can not be deleted before being deactivated. needDeactiveAndCommit: Can not be deleted before being deactivated and committed. parentPackageExists: Can not be deleted when parent package exists.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER success(1), unknownErr(2), noMem(3), pending(4), executing(5), cmdNotFinish(6), notSupport(7), cancel(8), pkgNotExist(9), pkgActivated(10), pkgNotActivated(11), unmatchMajorVer(12), runVerSyn(13), cannotDeactBase(14), isolateSscFailed(15), reloadPkgDeactFailed(16), notMeetDepend(17), actConflict(18), leNotReady(19), noActByVnd(20), issuNotSupport(21), needCommit(50), needDeactive(51), needDeactiveAndCommit(52), parentPackageExists(53)  

zxr10SwInstallSetRowStatus 1.3.6.1.4.1.3902.3.6002.8.2.1.4.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'destroy'. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10SoftwareInstallObjects 1.3.6.1.4.1.3902.3.6002.8.2.2
OBJECT IDENTIFIER    

zxr10SoftwareInstallAdd 1.3.6.1.4.1.3902.3.6002.8.2.2.1
OBJECT IDENTIFIER    

zxr10SwInstallAddTransferType 1.3.6.1.4.1.3902.3.6002.8.2.2.1.1
Transfer type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ftp(1), storage(2), sftp(3)  

zxr10SwInstallAddServiceType 1.3.6.1.4.1.3902.3.6002.8.2.2.1.2
Service type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER vrf(1), dcn(2)  

zxr10SwInstallAddVrfName 1.3.6.1.4.1.3902.3.6002.8.2.2.1.3
VPN routing or forwarding instance, used when service tyep is VRF.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

zxr10SwInstallAddFtpUserName 1.3.6.1.4.1.3902.3.6002.8.2.2.1.4
FTP user name for downloading set or package.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..64)  

zxr10SwInstallAddFtpPassword 1.3.6.1.4.1.3902.3.6002.8.2.2.1.5
FTP password for downloading set or package.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..64)  

zxr10SwInstallAddFtpAddressType 1.3.6.1.4.1.3902.3.6002.8.2.2.1.6
FTP IP address type for downloading set or package.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

zxr10SwInstallAddFtpAddress 1.3.6.1.4.1.3902.3.6002.8.2.2.1.7
FTP IP address for downloading set or package.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

zxr10SwInstallAddFilePath 1.3.6.1.4.1.3902.3.6002.8.2.2.1.8
FTP file path for downloading set or package.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..160)  

zxr10SwInstallAddFileName 1.3.6.1.4.1.3902.3.6002.8.2.2.1.9
FTP file name for downloading set or package.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..160)  

zxr10SwInstallAddStatus 1.3.6.1.4.1.3902.3.6002.8.2.2.1.10
Status of installing a set or package.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), downloading(2), decompressing(3), success(4), failed(5)  

zxr10SwInstallAddFailedReason 1.3.6.1.4.1.3902.3.6002.8.2.2.1.11
Failure reason of installing a set or package, description as follows: success: Success. unknownErr: Unknown error. noMem: No enough memory. pending: Pending. executing: Executing. cmdNotFinish: Can not process this command because other command is conflicted. noSpace: No enough free space on system disk. notFound: The file does not exist. pkgExist: The file already exists. pkgNameConflict: Can not operate packages with the same name. inputError: The string of input is wrong. urlError: The format of parameter is error. usrpwdError: User name or password is incorrect. pkgHandleError: Invalid package handle. fileFormatError: Invalid file format. downloadFailed: Download file failed. fileExist: The file already exists. fileNotExist: The file does not exist. vrfError: Invalid VRF name. ipOrPortError: Destination IP or port is unreachable. noMatchPlatform: The package cannot be applied to the current platform. nameLong: The path or file name is too long. copyFailed: Copying file failed. abort: Abort. noMoreSqu: Can not add more than 7 SQUASH packages or sets. existSameVersionPackage: There is a same version of package in the system. waitingFileSyncTimeout: Waiting for file synchronization timeout. digitalCertificateInvalid: Invalid digital certificate. digitalSignNotExist: No digital signature. digitalSignVerificationFailed: Digital signature verification failed.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER success(1), unknownErr(2), noMem(3), pending(4), executing(5), cmdNotFinish(6), noSpace(7), notFound(8), pkgExist(9), pkgNameConflict(10), inputError(11), urlError(12), usrpwdError(13), pkgHandleError(14), fileFormatError(15), downloadFailed(16), fileExist(17), fileNotExist(18), vrfError(19), ipOrPortError(20), noMatchPlatform(21), nameLong(22), copyFailed(23), abort(24), noMoreSqu(25), existSameVersionPackage(31), waitingFileSyncTimeout(32), digitalCertificateInvalid(35), digitalSignNotExist(36), digitalSignVerificationFailed(37)  

zxr10SwInstallAddFtpProgress 1.3.6.1.4.1.3902.3.6002.8.2.2.1.12
FTP download progress of installing a set or package. -1 will be returned when zxr10SwInstallAddTransferType is storage(2).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..100 | -1  

zxr10SwInstallAddFtpPort 1.3.6.1.4.1.3902.3.6002.8.2.2.1.13
FTP port for downloading set or package.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

zxr10SoftwareInstallCommit 1.3.6.1.4.1.3902.3.6002.8.2.2.2
OBJECT IDENTIFIER    

zxr10SwInstallCommit 1.3.6.1.4.1.3902.3.6002.8.2.2.2.1
Committing the current version.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER commit(1)  

zxr10SwInstallCommitStatus 1.3.6.1.4.1.3902.3.6002.8.2.2.2.2
Status of install committing.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), doing(2), success(3), failed(4)  

zxr10SwInstallCommitFailedReason 1.3.6.1.4.1.3902.3.6002.8.2.2.2.3
Failure reason of install committed, description as follows: success: Success. unknownErr: Unknown error. noMem: No enough memory. pending: Pending. executing: Executing. cmdNotFinish: Can not process this command because other command is conflicted. sysBusy: System busy. WriteBootFailed: Writing boot file(s) failed. wrongState: This operation is not allowed in this state. preparingSync: The operation is forbidden while preparing for synchronization.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER success(1), unknownErr(2), noMem(3), pending(4), executing(5), cmdNotFinish(6), sysBusy(7), writeBootFailed(8), wrongState(9), preparingSync(10)  

zxr10FirmwareUpdateObjects 1.3.6.1.4.1.3902.3.6002.8.2.3
OBJECT IDENTIFIER    

zxr10FirmwareUpdateTable 1.3.6.1.4.1.3902.3.6002.8.2.3.2
The firmware updating operation table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10FirmwareUpdateEntry

zxr10FirmwareUpdateEntry 1.3.6.1.4.1.3902.3.6002.8.2.3.2.1
The firmware updating operation entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10FirmwareUpdateEntry  

zxr10FirmwareUpdateType 1.3.6.1.4.1.3902.3.6002.8.2.3.2.1.1
Type of firmware to be upgraged.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER epld(1), boot(2), mcu(3)  

zxr10FirmwareUpdateRack 1.3.6.1.4.1.3902.3.6002.8.2.3.2.1.2
Rack number of system unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10FirmwareUpdateShelf 1.3.6.1.4.1.3902.3.6002.8.2.3.2.1.3
Shelf number of system unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10FirmwareUpdateSlot 1.3.6.1.4.1.3902.3.6002.8.2.3.2.1.4
Slot number of system unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10FirmwareUpdateCpu 1.3.6.1.4.1.3902.3.6002.8.2.3.2.1.5
CPU number of system unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10FirmwareUpdateOperation 1.3.6.1.4.1.3902.3.6002.8.2.3.2.1.6
Operation of updating.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER update(1)  

zxr10FirmwareUpdateStatus 1.3.6.1.4.1.3902.3.6002.8.2.3.2.1.7
Status of updating.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notStart(1), success(2), updating(3), notSupport(4), fileNotExist(5), sameVersion(6), loadFailed(7), verifyFailed(8), otherErrors(9), needReset(10)  

zxr10FirmwareBatchUpdateTable 1.3.6.1.4.1.3902.3.6002.8.2.3.3
The firmware batch updating operation table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10FirmwareBatchUpdateEntry

zxr10FirmwareBatchUpdateEntry 1.3.6.1.4.1.3902.3.6002.8.2.3.3.1
The firmware batch updating operation entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10FirmwareBatchUpdateEntry  

zxr10FirmwareBatchUpdateType 1.3.6.1.4.1.3902.3.6002.8.2.3.3.1.1
Type of firmware to be updated.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER epld(1), boot(2)  

zxr10FirmwareBatchUpdateOperate 1.3.6.1.4.1.3902.3.6002.8.2.3.3.1.2
Operation of updating.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER update(1)  

zxr10SoftwarePatchInfoObjects 1.3.6.1.4.1.3902.3.6002.8.2.4
OBJECT IDENTIFIER    

zxr10SoftwarePatchInfoTable 1.3.6.1.4.1.3902.3.6002.8.2.4.2
The patch information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10SoftwarePatchInfoEntry

zxr10SoftwarePatchInfoEntry 1.3.6.1.4.1.3902.3.6002.8.2.4.2.1
The patch information entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10SoftwarePatchInfoEntry  

zxr10SoftwarePatchDisplayName 1.3.6.1.4.1.3902.3.6002.8.2.4.2.1.1
The full name of the patch.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

zxr10SoftwarePatchBelongTo 1.3.6.1.4.1.3902.3.6002.8.2.4.2.1.2
The patch package name of the patch belonging to.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

zxr10SoftwarePatchType 1.3.6.1.4.1.3902.3.6002.8.2.4.2.1.3
The type of the patch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER hotPatch(1), coldPatch(2)  

zxr10SoftwarePatchVersion 1.3.6.1.4.1.3902.3.6002.8.2.4.2.1.4
The version of the patch.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10SoftwarePatchStatus 1.3.6.1.4.1.3902.3.6002.8.2.4.2.1.5
The status of the patch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER added(1), committed(2), activated(3), deactivated(4)  

zxr10SoftwarePatchAddTime 1.3.6.1.4.1.3902.3.6002.8.2.4.2.1.6
The added time of the patch.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxr10SoftwarePatchOperation 1.3.6.1.4.1.3902.3.6002.8.2.4.2.1.7
Operation of the patch.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER activate(1), deactivate(2)  

zxr10SoftwarePatchSize 1.3.6.1.4.1.3902.3.6002.8.2.4.2.1.8
Size of the patch.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

zxr10SoftwarePatchBuildTime 1.3.6.1.4.1.3902.3.6002.8.2.4.2.1.9
Building time of the patch.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxr10SoftwarePatchMatch 1.3.6.1.4.1.3902.3.6002.8.2.4.2.1.10
Whether the patch and the version match.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

zxr10SoftwarePatchOperStatus 1.3.6.1.4.1.3902.3.6002.8.2.4.2.1.11
Status of operating patch .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), doing(2), success(3), failed(4)  

zxr10SoftwarePatchFailReason 1.3.6.1.4.1.3902.3.6002.8.2.4.2.1.12
Failure reason of opterating package, description as follows: success: Success. unknownErr: Unknown error. noMem: No enough memory. pending: Pending. executing: Executing. cmdNotFinish: Can not process this command because other command is conflicted. notSupport: The function does not support. pkgNotExist: The package does not exist. pkgActivated: The package has been activated. pkgNotActivated: The package has not been activated. unmatchMajorVer: Unmatched major version. runVerSyn: Version file(s) synchronization is being executed. notMeetDepend: The package does not meet the dependence. actConflict: The package conflicted with the packages which have been activated.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER success(1), unknownErr(2), noMem(3), pending(4), executing(5), cmdNotFinish(6), notSupport(7), pkgNotExist(8), pkgActivated(9), pkgNotActivated(10), unmatchMajorVer(11), runVerSyn(12), notMeetDepend(13), actConflict(14)  

zxr10SoftwarePatchRowStatus 1.3.6.1.4.1.3902.3.6002.8.2.4.2.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'destroy'. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10SoftwarePatchPkgInfoTable 1.3.6.1.4.1.3902.3.6002.8.2.4.3
The patch package information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10SoftwarePatchPkgInfoEntry

zxr10SoftwarePatchPkgInfoEntry 1.3.6.1.4.1.3902.3.6002.8.2.4.3.1
The patch package information entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10SoftwarePatchPkgInfoEntry  

zxr10SoftwarePatchPkgName 1.3.6.1.4.1.3902.3.6002.8.2.4.3.1.1
Full name of the patch package.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

zxr10SoftwarePatchPkgType 1.3.6.1.4.1.3902.3.6002.8.2.4.3.1.2
The type of patch package.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER patch(3), patchPkg(7), wholePatchPkg(8)  

zxr10SoftwarePatchPkgVersion 1.3.6.1.4.1.3902.3.6002.8.2.4.3.1.3
The version of patch package.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10SoftwarePatchPkgOperation 1.3.6.1.4.1.3902.3.6002.8.2.4.3.1.4
The operation of the patch package.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER activate(1), deactivate(2)  

zxr10SoftwarePatchPkgSize 1.3.6.1.4.1.3902.3.6002.8.2.4.3.1.5
Size of the patch package.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

zxr10SoftwarePatchPkgBuildTime 1.3.6.1.4.1.3902.3.6002.8.2.4.3.1.6
Building time of the patch package.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

zxr10SoftwarePatchPkgOperStatus 1.3.6.1.4.1.3902.3.6002.8.2.4.3.1.7
Status of operating patch package.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ready(1), doing(2), success(3), failed(4)  

zxr10SoftwarePatchPkgFailReason 1.3.6.1.4.1.3902.3.6002.8.2.4.3.1.8
Failure reason of opterating package, description as follows: success: Success. unknownErr: Unknown error. noMem: No enough memory. pending: Pending. executing: Executing. cmdNotFinish: Can not process this command because other command is conflicted. notSupport: The function does not support. pkgNotExist: The package does not exist. pkgActivated: The package has been activated. pkgNotActivated: The package has not been activated. unmatchMajorVer: Unmatched major version. runVerSyn: Version file(s) synchronization is being executed. notMeetDepend: The package does not meet the dependence. actConflict: The package conflicted with the packages which have been activated.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER success(1), unknownErr(2), noMem(3), pending(4), executing(5), cmdNotFinish(6), notSupport(7), pkgNotExist(8), pkgActivated(9), pkgNotActivated(10), unmatchMajorVer(11), runVerSyn(12), notMeetDepend(13), actConflict(14)  

zxr10SoftwarePatchPkgRowStatus 1.3.6.1.4.1.3902.3.6002.8.2.4.3.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'destroy'. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

zxr10SwPatchEffectiveInfoTable 1.3.6.1.4.1.3902.3.6002.8.2.4.4
The patch effective information table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10SwPatchEffectiveInfoEntry

zxr10SwPatchEffectiveInfoEntry 1.3.6.1.4.1.3902.3.6002.8.2.4.4.1
The patch effective information entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10SwPatchEffectiveInfoEntry  

zxr10SwPatchEffectiveRack 1.3.6.1.4.1.3902.3.6002.8.2.4.4.1.1
Rack number of the system unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10SwPatchEffectiveShelf 1.3.6.1.4.1.3902.3.6002.8.2.4.4.1.2
Shelf number of the system unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10SwPatchEffectiveSlot 1.3.6.1.4.1.3902.3.6002.8.2.4.4.1.3
Slot number of the system unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10SwPatchEffectiveCpu 1.3.6.1.4.1.3902.3.6002.8.2.4.4.1.4
CPU number of the system unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

zxr10SwPatchEffectiveDisplayName 1.3.6.1.4.1.3902.3.6002.8.2.4.4.1.5
The full name of the patch.
Status: current Access: not-accessible
OBJECT-TYPE    
  DisplayString  

zxr10SwPatchEffectiveStatus 1.3.6.1.4.1.3902.3.6002.8.2.4.4.1.6
The effective status of the patch.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER effective(1), executing(2), failed(3), waitingForRestart(4)  

zxr10SwPatchEffectiveBelongTo 1.3.6.1.4.1.3902.3.6002.8.2.4.4.1.7
The patch package name of the patch belonging to.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString